Skip to contentSkip to conversation

bitbake.conf: propagate 'opengl' DISTRO_FEATURE to native/nativesdk from target

PATCH In review Alexander Kanavin 2 participants 5 messages May 12, 2020

lore
Share & tools
lore
#0 lore raw

PATCH 1/3 bitbake.conf: propagate 'opengl' DISTRO_FEATURE to native/nativesdk from target

This will allow better control over native virgl/qemu configurations.

Adjust gtk+3/cairo native configurations to actually ignore opengl when building for -native: we do not need it, and it would cause build failures as only a limited subset of mesa-native is currently built.

Drop native/nativesdk overrides from virglrenderer/libepoxy recipes as opengl feature is now correctly set for those variants.

---
 meta/conf/bitbake.conf                                     | 4 ++--
 meta/recipes-gnome/gtk+/gtk+3.inc                          | 2 ++
 meta/recipes-graphics/cairo/cairo_1.16.0.bb                | 2 ++
 meta/recipes-graphics/libepoxy/libepoxy_1.5.4.bb           | 2 --
 meta/recipes-graphics/virglrenderer/virglrenderer_0.8.2.bb | 2 --
 5 files changed, 6 insertions(+), 6 deletions(-)
meta/conf/bitbake.conf +2 -2
index bdade79abe..f7700f1191 100644
@@ -833,8 +833,8 @@ DISTRO_FEATURES_NATIVESDK ?= "x11"
 
 # Normally target distro features will not be applied to native builds:
 # Native distro features on this list will use the target feature value
-DISTRO_FEATURES_FILTER_NATIVE ?= "api-documentation"
-DISTRO_FEATURES_FILTER_NATIVESDK ?= "api-documentation"
+DISTRO_FEATURES_FILTER_NATIVE ?= "api-documentation opengl"
+DISTRO_FEATURES_FILTER_NATIVESDK ?= "api-documentation opengl"
 
 DISTRO_FEATURES_BACKFILL = "pulseaudio sysvinit gobject-introspection-data ldconfig"
 MACHINE_FEATURES_BACKFILL = "rtc qemu-usermode"
meta/recipes-gnome/gtk+/gtk+3.inc +2 -0
index 5d1f59ea1a..6154154004 100644
@@ -46,6 +46,8 @@ do_compile_prepend() {
 
 PACKAGECONFIG ??= "${@bb.utils.filter('DISTRO_FEATURES', 'opengl wayland x11', d)} \
                    ${@bb.utils.contains('DISTRO_FEATURES', 'opengl x11', 'glx', '', d)}"
+PACKAGECONFIG_class-native = "${@bb.utils.filter('DISTRO_FEATURES', 'x11', d)}"
+PACKAGECONFIG_class-nativesdk = "${@bb.utils.filter('DISTRO_FEATURES', 'x11', d)}"
 
 PACKAGECONFIG[x11] = "--enable-x11-backend,--disable-x11-backend,at-spi2-atk fontconfig libx11 libxext libxcursor libxi libxdamage libxrandr libxrender libxcomposite libxfixes"
 # this is provided by oe-core patch that removes epoxy/gl dependency from a X11 build
meta/recipes-graphics/cairo/cairo_1.16.0.bb +2 -0
index b772c2ece2..092c77b826 100644
@@ -42,6 +42,8 @@ PACKAGECONFIG ??= "${@bb.utils.filter('DISTRO_FEATURES', 'directfb', d)} \
                    ${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'x11 xcb', '', d)} \
                    ${@bb.utils.contains('DISTRO_FEATURES', 'x11 opengl', 'opengl', '', d)} \
                    trace"
+PACKAGECONFIG_class-native = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'x11 xcb', '', d)}"
+PACKAGECONFIG_class-nativesdk = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'x11 xcb', '', d)}"
 
 PACKAGECONFIG[x11] = "--with-x=yes -enable-xlib,--with-x=no --disable-xlib,${X11DEPENDS}"
 PACKAGECONFIG[xcb] = "--enable-xcb,--disable-xcb,libxcb"
meta/recipes-graphics/libepoxy/libepoxy_1.5.4.bb +0 -2
index 0782c6ce35..6646ef79fe 100644
@@ -19,8 +19,6 @@ UPSTREAM_CHECK_URI = "https://github.com/anholt/libepoxy/releases"
 inherit meson pkgconfig features_check
 
 REQUIRED_DISTRO_FEATURES = "opengl"
-REQUIRED_DISTRO_FEATURES_class-native = ""
-REQUIRED_DISTRO_FEATURES_class-nativesdk = ""
 
 PACKAGECONFIG[egl] = "-Degl=yes, -Degl=no, virtual/egl"
 PACKAGECONFIG[x11] = "-Dglx=yes, -Dglx=no -Dx11=false, virtual/libx11 virtual/libgl"
meta/recipes-graphics/virglrenderer/virglrenderer_0.8.2.bb +0 -2
index 1046b8504f..29b12628d0 100644
@@ -22,5 +22,3 @@ inherit meson pkgconfig features_check
 BBCLASSEXTEND = "native nativesdk"
 
 REQUIRED_DISTRO_FEATURES = "opengl"
-REQUIRED_DISTRO_FEATURES_class-native = ""
-REQUIRED_DISTRO_FEATURES_class-nativesdk = ""
Signature · 1 line
2.26.1
#1 lore raw

PATCH 2/3 libsdl2: enable opengl option for native/nativesdk, subject to 'opengl' in DISTRO_FEATURES

This allows virgl support in qemu with the SDL frontend

---
 meta/recipes-graphics/libsdl2/libsdl2_2.0.12.bb | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
meta/recipes-graphics/libsdl2/libsdl2_2.0.12.bb +2 -2
index c1c941e452..83dce86801 100644
@@ -45,8 +45,8 @@ EXTRA_OECONF = "--disable-oss --disable-esd --disable-arts \
 # and BSP layers to pick either (desktop) opengl, gles2, or no GL
 PACKAGECONFIG_GL ?= "${@bb.utils.filter('DISTRO_FEATURES', 'opengl', d)}"
 
-PACKAGECONFIG_class-native = "x11"
-PACKAGECONFIG_class-nativesdk = "${@bb.utils.filter('DISTRO_FEATURES', 'x11', d)}"
+PACKAGECONFIG_class-native = "x11 ${PACKAGECONFIG_GL}"
+PACKAGECONFIG_class-nativesdk = "${@bb.utils.filter('DISTRO_FEATURES', 'x11', d)} ${PACKAGECONFIG_GL}"
 PACKAGECONFIG ??= " \
     ${PACKAGECONFIG_GL} \
     ${@bb.utils.filter('DISTRO_FEATURES', 'alsa directfb pulseaudio x11', d)} \
Signature · 1 line
2.26.1
#2 lore raw

PATCH 3/3 qemu: enable virglrenderer and glx options subject to 'opengl' DISTRO_FEATURE

In reply to Alexander Kanavin

Note that to actually use accelerated GL passthrough, there are two options

1) a suitable frontend need to be also enabled - gtk+ and SDL both seem to work well. Previously I struggled to make SDL work, but now it seems fine.

2) it is also possible to render off-screen with -display egl-headless option, and see the output with a VNC viewer (for which, qemu needs to be started with a VNC server):

$ runqemu kvm egl-headless publicvnc
---
 meta/lib/oeqa/selftest/cases/runtime_test.py   | 18 ++++++------------
 .../qemu/qemu-system-native_4.2.0.bb           |  4 +++-
 meta/recipes-devtools/qemu/qemu_4.2.0.bb       |  5 ++++-
 3 files changed, 13 insertions(+), 14 deletions(-)
meta/lib/oeqa/selftest/cases/runtime_test.py +6 -12
index 09d3de7aea..793c98a335 100644
@@ -188,18 +188,14 @@ class TestImage(OESelftestTestCase):
             self.skipTest('virgl isn\'t working with Opensuse 15.0')
 
         qemu_packageconfig = get_bb_var('PACKAGECONFIG', 'qemu-system-native')
-        sdl_packageconfig = get_bb_var('PACKAGECONFIG', 'libsdl2-native')
+        qemu_distrofeatures = get_bb_var('DISTRO_FEATURES', 'qemu-system-native')
         features = 'INHERIT += "testimage"\n'
         if 'gtk+' not in qemu_packageconfig:
             features += 'PACKAGECONFIG_append_pn-qemu-system-native = " gtk+"\n'
         if 'sdl' not in qemu_packageconfig:
             features += 'PACKAGECONFIG_append_pn-qemu-system-native = " sdl"\n'
-        if 'virglrenderer' not in qemu_packageconfig:
-            features += 'PACKAGECONFIG_append_pn-qemu-system-native = " virglrenderer"\n'
-        if 'glx' not in qemu_packageconfig:
-            features += 'PACKAGECONFIG_append_pn-qemu-system-native = " glx"\n'
-        if 'opengl' not in sdl_packageconfig:
-            features += 'PACKAGECONFIG_append_pn-libsdl2-native = " opengl"\n'
+        if 'opengl' not in qemu_distrofeatures:
+            features += 'DISTRO_FEATURES_append = " opengl"\n'
         features += 'TEST_SUITES = "ping ssh virgl"\n'
         features += 'IMAGE_FEATURES_append = " ssh-server-dropbear"\n'
         features += 'IMAGE_INSTALL_append = " kmscube"\n'
@@ -231,12 +227,10 @@ class TestImage(OESelftestTestCase):
             dripath = subprocess.check_output("pkg-config --variable=dridriverdir dri", shell=True)
         except subprocess.CalledProcessError as e:
             self.skipTest("Could not determine the path to dri drivers on the host via pkg-config.\nPlease install Mesa development files (particularly, dri.pc) on the host machine.")
-        qemu_packageconfig = get_bb_var('PACKAGECONFIG', 'qemu-system-native')
+        qemu_distrofeatures = get_bb_var('DISTRO_FEATURES', 'qemu-system-native')
         features = 'INHERIT += "testimage"\n'
-        if 'virglrenderer' not in qemu_packageconfig:
-            features += 'PACKAGECONFIG_append_pn-qemu-system-native = " virglrenderer"\n'
-        if 'glx' not in qemu_packageconfig:
-            features += 'PACKAGECONFIG_append_pn-qemu-system-native = " glx"\n'
+        if 'opengl' not in qemu_distrofeatures:
+            features += 'DISTRO_FEATURES_append = " opengl"\n'
         features += 'TEST_SUITES = "ping ssh virgl"\n'
         features += 'IMAGE_FEATURES_append = " ssh-server-dropbear"\n'
         features += 'IMAGE_INSTALL_append = " kmscube"\n'
meta/recipes-devtools/qemu/qemu-system-native_4.2.0.bb +3 -1
index d83ee59375..7394385d30 100644
@@ -9,7 +9,9 @@ DEPENDS = "glib-2.0-native zlib-native pixman-native qemu-native bison-native"
 
 EXTRA_OECONF_append = " --target-list=${@get_qemu_system_target_list(d)}"
 
-PACKAGECONFIG ??= "fdt alsa kvm"
+PACKAGECONFIG ??= "fdt alsa kvm \
+    ${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'virglrenderer glx', '' ,d)} \
+"
 
 # Handle distros such as CentOS 5 32-bit that do not have kvm support
 PACKAGECONFIG_remove = "${@'kvm' if not os.path.exists('/usr/include/linux/kvm.h') else ''}"
meta/recipes-devtools/qemu/qemu_4.2.0.bb +4 -1
index f0c1daabe1..a4018cc448 100644
@@ -21,5 +21,8 @@ do_install_append_class-nativesdk() {
 PACKAGECONFIG ??= " \
     fdt sdl kvm \
     ${@bb.utils.filter('DISTRO_FEATURES', 'alsa xen', d)} \
+    ${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'virglrenderer glx', '' ,d)} \
+"
+PACKAGECONFIG_class-nativesdk ??= "fdt sdl kvm \
+    ${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'virglrenderer glx', '' ,d)} \
 "
-PACKAGECONFIG_class-nativesdk ??= "fdt sdl kvm"
Signature · 1 line
2.26.1
#3 lore raw
In reply to Alexander Kanavin
Quoted 9 lines · Alexander Kanavin

This will allow better control over native virgl/qemu configurations.

Adjust gtk+3/cairo native configurations to actually ignore opengl when building for -native: we do not need it, and it would cause build failures as only a limited subset of mesa-native is currently built.

Drop native/nativesdk overrides from virglrenderer/libepoxy recipes as opengl feature is now correctly set for those variants.

DISTRO_FEATURES are meant for target most of the time so this seems not the right way to go about it. perhaps HOST_DISTRO_FEATURES or some such would be the way to go, since it should not be enforced on folks who do
not want it and dont use qemu as machine but just as a veneer to cross build stuff.

Quoted 77 lines
---
  meta/conf/bitbake.conf                                     | 4 ++--
  meta/recipes-gnome/gtk+/gtk+3.inc                          | 2 ++
  meta/recipes-graphics/cairo/cairo_1.16.0.bb                | 2 ++
  meta/recipes-graphics/libepoxy/libepoxy_1.5.4.bb           | 2 --
  meta/recipes-graphics/virglrenderer/virglrenderer_0.8.2.bb | 2 --
  5 files changed, 6 insertions(+), 6 deletions(-)
meta/conf/bitbake.conf +2 -2
index bdade79abe..f7700f1191 100644
@@ -833,8 +833,8 @@ DISTRO_FEATURES_NATIVESDK ?= "x11"
 
  # Normally target distro features will not be applied to native builds:
  # Native distro features on this list will use the target feature value
-DISTRO_FEATURES_FILTER_NATIVE ?= "api-documentation"
-DISTRO_FEATURES_FILTER_NATIVESDK ?= "api-documentation"
+DISTRO_FEATURES_FILTER_NATIVE ?= "api-documentation opengl"
+DISTRO_FEATURES_FILTER_NATIVESDK ?= "api-documentation opengl"
 
  DISTRO_FEATURES_BACKFILL = "pulseaudio sysvinit gobject-introspection-data ldconfig"
  MACHINE_FEATURES_BACKFILL = "rtc qemu-usermode"
meta/recipes-gnome/gtk+/gtk+3.inc +2 -0
index 5d1f59ea1a..6154154004 100644
@@ -46,6 +46,8 @@ do_compile_prepend() {
 
  PACKAGECONFIG ??= "${@bb.utils.filter('DISTRO_FEATURES', 'opengl wayland x11', d)} \
                     ${@bb.utils.contains('DISTRO_FEATURES', 'opengl x11', 'glx', '', d)}"
+PACKAGECONFIG_class-native = "${@bb.utils.filter('DISTRO_FEATURES', 'x11', d)}"
+PACKAGECONFIG_class-nativesdk = "${@bb.utils.filter('DISTRO_FEATURES', 'x11', d)}"
 
  PACKAGECONFIG[x11] = "--enable-x11-backend,--disable-x11-backend,at-spi2-atk fontconfig libx11 libxext libxcursor libxi libxdamage libxrandr libxrender libxcomposite libxfixes"
  # this is provided by oe-core patch that removes epoxy/gl dependency from a X11 build
meta/recipes-graphics/cairo/cairo_1.16.0.bb +2 -0
index b772c2ece2..092c77b826 100644
@@ -42,6 +42,8 @@ PACKAGECONFIG ??= "${@bb.utils.filter('DISTRO_FEATURES', 'directfb', d)} \
                     ${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'x11 xcb', '', d)} \
                     ${@bb.utils.contains('DISTRO_FEATURES', 'x11 opengl', 'opengl', '', d)} \
                     trace"
+PACKAGECONFIG_class-native = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'x11 xcb', '', d)}"
+PACKAGECONFIG_class-nativesdk = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'x11 xcb', '', d)}"
 
  PACKAGECONFIG[x11] = "--with-x=yes -enable-xlib,--with-x=no --disable-xlib,${X11DEPENDS}"
  PACKAGECONFIG[xcb] = "--enable-xcb,--disable-xcb,libxcb"
meta/recipes-graphics/libepoxy/libepoxy_1.5.4.bb +0 -2
index 0782c6ce35..6646ef79fe 100644
@@ -19,8 +19,6 @@ UPSTREAM_CHECK_URI = "https://github.com/anholt/libepoxy/releases"
  inherit meson pkgconfig features_check
 
  REQUIRED_DISTRO_FEATURES = "opengl"
-REQUIRED_DISTRO_FEATURES_class-native = ""
-REQUIRED_DISTRO_FEATURES_class-nativesdk = ""
 
  PACKAGECONFIG[egl] = "-Degl=yes, -Degl=no, virtual/egl"
  PACKAGECONFIG[x11] = "-Dglx=yes, -Dglx=no -Dx11=false, virtual/libx11 virtual/libgl"
meta/recipes-graphics/virglrenderer/virglrenderer_0.8.2.bb +0 -2
index 1046b8504f..29b12628d0 100644
@@ -22,5 +22,3 @@ inherit meson pkgconfig features_check
  BBCLASSEXTEND = "native nativesdk"
 
  REQUIRED_DISTRO_FEATURES = "opengl"
-REQUIRED_DISTRO_FEATURES_class-native = ""
-REQUIRED_DISTRO_FEATURES_class-nativesdk = ""
#4 lore raw
Quoted 6 lines · Khem Raj

DISTRO_FEATURES are meant for target most of the time so this seems not the right way to go about it. perhaps HOST_DISTRO_FEATURES or some such would be the way to go, since it should not be enforced on folks who do not want it and dont use qemu as machine but just as a veneer to cross build stuff.

If someone isn't using qemu-system-native recipe (the full system emulators), then qemu-system-native isn't built at all, and so they're entirely unaffected, no? All the native opengl stuff is pulled in by only that recipe.

Otherwise, it's easy to disable: set DISTRO_FEATURES_FILTER_NATIVE to "".

Alex

Quoted 100 lines
Quoted 15 lines
---
  meta/conf/bitbake.conf                                     | 4 ++--
  meta/recipes-gnome/gtk+/gtk+3.inc                          | 2 ++
  meta/recipes-graphics/cairo/cairo_1.16.0.bb                | 2 ++
  meta/recipes-graphics/libepoxy/libepoxy_1.5.4.bb           | 2 --
  meta/recipes-graphics/virglrenderer/virglrenderer_0.8.2.bb | 2 --
  5 files changed, 6 insertions(+), 6 deletions(-)
meta/conf/bitbake.conf +0 -0
index bdade79abe..f7700f1191 100644

meta/conf/bitbake.conf DISTRO_FEATURES_NATIVESDK ?= "x11" · line 839

Quoted 9 lines
meta/conf/bitbake.conf +2 -2
@@ -833,8 +833,8 @@ DISTRO_FEATURES_NATIVESDK ?= "x11"
 
  # Normally target distro features will not be applied to native builds:
  # Native distro features on this list will use the target feature value
-DISTRO_FEATURES_FILTER_NATIVE ?= "api-documentation"
-DISTRO_FEATURES_FILTER_NATIVESDK ?= "api-documentation"
+DISTRO_FEATURES_FILTER_NATIVE ?= "api-documentation opengl"
+DISTRO_FEATURES_FILTER_NATIVESDK ?= "api-documentation opengl"
 
  DISTRO_FEATURES_BACKFILL = "pulseaudio sysvinit

gobject-introspection-data ldconfig"

Review

Quoted 2 lines
meta/conf/bitbake.conf +0 -0
  MACHINE_FEATURES_BACKFILL = "rtc qemu-usermode"
(quoted diff) +0 -0

b/meta/recipes-gnome/gtk+/gtk+3.inc

meta/recipes-gnome/gtk+/gtk+3.inc do_compile_prepend() { · line 47

Quoted 6 lines

index 5d1f59ea1a..6154154004 100644

meta/recipes-gnome/gtk+/gtk+3.inc +0 -0
@@ -46,6 +46,8 @@ do_compile_prepend() {
 
  PACKAGECONFIG ??= "${@bb.utils.filter('DISTRO_FEATURES', 'opengl

wayland x11', d)} \

meta/recipes-gnome/gtk+/gtk+3.inc do_compile_prepend() { · line 48

Quoted 1 line
meta/recipes-gnome/gtk+/gtk+3.inc +0 -0
                     ${@bb.utils.contains('DISTRO_FEATURES', 'opengl

x11', 'glx', '', d)}"

meta/recipes-gnome/gtk+/gtk+3.inc do_compile_prepend() { · line 49

Quoted 1 line
meta/recipes-gnome/gtk+/gtk+3.inc +1 -0
+PACKAGECONFIG_class-native = "${@bb.utils.filter('DISTRO_FEATURES',

'x11', d)}"

meta/recipes-gnome/gtk+/gtk+3.inc do_compile_prepend() { · line 50

Quoted 1 line
meta/recipes-gnome/gtk+/gtk+3.inc +1 -0
+PACKAGECONFIG_class-nativesdk = "${@bb.utils.filter('DISTRO_FEATURES',

'x11', d)}"

meta/recipes-gnome/gtk+/gtk+3.inc do_compile_prepend() { · line 51

Quoted 2 lines
meta/recipes-gnome/gtk+/gtk+3.inc +0 -0
  PACKAGECONFIG[x11] =

"--enable-x11-backend,--disable-x11-backend,at-spi2-atk fontconfig libx11 libxext libxcursor libxi libxdamage libxrandr libxrender libxcomposite libxfixes"

meta/recipes-gnome/gtk+/gtk+3.inc do_compile_prepend() { · line 52

Quoted 1 line
meta/recipes-gnome/gtk+/gtk+3.inc +0 -0
  # this is provided by oe-core patch that removes epoxy/gl dependency

from a X11 build

Review

Quoted 1 line
(quoted diff) +0 -0

b/meta/recipes-graphics/cairo/cairo_1.16.0.bb

meta/recipes-graphics/cairo/cairo_1.16.0.bb PACKAGECONFIG ??=

Quoted 4 lines

index b772c2ece2..092c77b826 100644

meta/recipes-graphics/cairo/cairo_1.16.0.bb +0 -0
@@ -42,6 +42,8 @@ PACKAGECONFIG ??=

"${@bb.utils.filter('DISTRO_FEATURES', 'directfb', d)} \

meta/recipes-graphics/cairo/cairo_1.16.0.bb PACKAGECONFIG ??= · line 42

Quoted 1 line
meta/recipes-graphics/cairo/cairo_1.16.0.bb +0 -0
                     ${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'x11

xcb', '', d)} \

meta/recipes-graphics/cairo/cairo_1.16.0.bb PACKAGECONFIG ??= · line 43

Quoted 1 line
meta/recipes-graphics/cairo/cairo_1.16.0.bb +0 -0
                     ${@bb.utils.contains('DISTRO_FEATURES', 'x11

opengl', 'opengl', '', d)} \

meta/recipes-graphics/cairo/cairo_1.16.0.bb PACKAGECONFIG ??= · line 45

Quoted 2 lines
meta/recipes-graphics/cairo/cairo_1.16.0.bb +1 -0
                     trace"
+PACKAGECONFIG_class-native = "${@bb.utils.contains('DISTRO_FEATURES',

'x11', 'x11 xcb', '', d)}"

meta/recipes-graphics/cairo/cairo_1.16.0.bb PACKAGECONFIG ??= · line 46

Quoted 1 line
meta/recipes-graphics/cairo/cairo_1.16.0.bb +1 -0
+PACKAGECONFIG_class-nativesdk =

"${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'x11 xcb', '', d)}"

meta/recipes-graphics/cairo/cairo_1.16.0.bb PACKAGECONFIG ??= · line 47

Quoted 2 lines
meta/recipes-graphics/cairo/cairo_1.16.0.bb +0 -0
  PACKAGECONFIG[x11] = "--with-x=yes -enable-xlib,--with-x=no

--disable-xlib,${X11DEPENDS}"

Review

Quoted 2 lines
meta/recipes-graphics/cairo/cairo_1.16.0.bb +0 -0
  PACKAGECONFIG[xcb] = "--enable-xcb,--disable-xcb,libxcb"
(quoted diff) +0 -0

b/meta/recipes-graphics/libepoxy/libepoxy_1.5.4.bb

meta/recipes-graphics/libepoxy/libepoxy_1.5.4.bb UPSTREAM_CHECK_URI = "

Quoted 4 lines

index 0782c6ce35..6646ef79fe 100644

meta/recipes-graphics/libepoxy/libepoxy_1.5.4.bb +0 -0
@@ -19,8 +19,6 @@ UPSTREAM_CHECK_URI = "

https://github.com/anholt/libepoxy/releases"

meta/recipes-graphics/libepoxy/libepoxy_1.5.4.bb UPSTREAM_CHECK_URI = "https://github.com/anholt/libepoxy/releases"

Quoted 8 lines
meta/recipes-graphics/libepoxy/libepoxy_1.5.4.bb +0 -2
  inherit meson pkgconfig features_check
 
  REQUIRED_DISTRO_FEATURES = "opengl"
-REQUIRED_DISTRO_FEATURES_class-native = ""
-REQUIRED_DISTRO_FEATURES_class-nativesdk = ""
 
  PACKAGECONFIG[egl] = "-Degl=yes, -Degl=no, virtual/egl"
  PACKAGECONFIG[x11] = "-Dglx=yes, -Dglx=no -Dx11=false, virtual/libx11

virtual/libgl"

Review

Quoted 1 line
(quoted diff) +0 -0

b/meta/recipes-graphics/virglrenderer/virglrenderer_0.8.2.bb

Quoted 13 lines

index 1046b8504f..29b12628d0 100644

meta/recipes-graphics/virglrenderer/virglrenderer_0.8.2.bb +0 -2
@@ -22,5 +22,3 @@ inherit meson pkgconfig features_check
  BBCLASSEXTEND = "native nativesdk"
 
  REQUIRED_DISTRO_FEATURES = "opengl"
-REQUIRED_DISTRO_FEATURES_class-native = ""
-REQUIRED_DISTRO_FEATURES_class-nativesdk = ""