ice: Reset VF for all port VLAN changes from host
Subsystems (2)
Tony Nguyen
maintainerPATCH 1/9 ice: Reset VF for all port VLAN changes from host
From: Brett Creeley <[email protected]>
Currently the PF is modifying the VF's port VLAN on the fly when configured via iproute. This is okay for most cases, but if the VF already has guest VLANs configured the PF has to remove all of those filters so only VLAN tagged traffic that matches the port VLAN will pass. Instead of adding functionality to track which guest VLANs have been added, just reset the VF each time port VLAN parameters are modified.
--- .../net/ethernet/intel/ice/ice_virtchnl_pf.c | 42 +++---------------- 1 file changed, 5 insertions(+), 37 deletions(-)
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c +5 -37
@@ -3269,7 +3269,6 @@ ice_set_vf_port_vlan(struct net_device *netdev, int vf_id, u16 vlan_id, u8 qos, __be16 vlan_proto) {struct ice_pf *pf =ice_netdev_to_pf (netdev); -struct ice_vsi *vsi;struct device *dev;struct ice_vf *vf;u16 vlanprio;
@@ -3291,8 +3290,6 @@ ice_set_vf_port_vlan(struct net_device *netdev, int vf_id, u16 vlan_id, u8 qos, } vf = &pf->vf[vf_id]; - vsi = pf->vsi[vf->lan_vsi_idx]; - ret =ice_check_vf_ready_for_cfg (vf);if (ret)return ret;
@@ -3305,44 +3302,15 @@ ice_set_vf_port_vlan(struct net_device *netdev, int vf_id, u16 vlan_id, u8 qos,return 0 ; } -if (vlan_id || qos) { -/* remove VLAN 0 filter set by default when transitioning from -* no port VLAN to a port VLAN. No change to old port VLAN on -* failure. -*/ - ret =ice_vsi_kill_vlan (vsi,0 ); -if (ret) -return ret; - ret =ice_vsi_manage_pvid (vsi, vlanprio, true); -if (ret) -return ret; - }else { -/* add VLAN 0 filter back when transitioning from port VLAN to -* no port VLAN. No change to old port VLAN on failure. -*/ - ret =ice_vsi_add_vlan (vsi,0 ,ICE_FWD_TO_VSI ); -if (ret) -return ret; - ret =ice_vsi_manage_pvid (vsi,0 , false); -if (ret) -return ret; - } + vf->port_vlan_info = vlanprio; -if (vlan_id) { +if (vf->port_vlan_info)dev_info (dev,"Setting VLAN %d, QoS 0x%x on VF %d\n" , vlan_id, qos, vf_id); +else +dev_info (dev,"Clearing port VLAN on VF %d\n" , vf_id); -/* add VLAN filter for the port VLAN */ - ret =ice_vsi_add_vlan (vsi, vlan_id,ICE_FWD_TO_VSI ); -if (ret) -return ret; - } -/* remove old port VLAN filter with valid VLAN ID or QoS fields */ -if (vf->port_vlan_info) -ice_vsi_kill_vlan (vsi, vf->port_vlan_info &VLAN_VID_MASK ); - -/* keep port VLAN information persistent on resets */ - vf->port_vlan_info =le16_to_cpu (vsi->info.pvid); +ice_vc_reset_vf (vf);return 0 ; }
Signature · 1 line
2.20.1
Tony Nguyen
maintainerPATCH 2/9 ice: Always clear QRXFLXP_CNTXT before writing new value
From: Brett Creeley <[email protected]>
Always clear the previous value in QRXFLXP_CNTXT before writing a new value. This will make it so re-used queues will not accidentally take the previously configured settings.
--- drivers/net/ethernet/intel/ice/ice_base.c | 33 ++++++++--------------- drivers/net/ethernet/intel/ice/ice_lib.c | 26 ++++++++++++++++++ drivers/net/ethernet/intel/ice/ice_lib.h | 3 +++ 3 files changed, 40 insertions(+), 22 deletions(-)
drivers/net/ethernet/intel/ice/ice_base.c +11 -22
@@ -2,6 +2,7 @@/* Copyright (c) 2019, Intel Corporation. */ #include "ice_base.h" +#include "ice_lib.h" #include "ice_dcb_lib.h" /**
@@ -285,7 +286,6 @@ static int ice_setup_rx_ctx(struct ice_ring *ring)u32 rxdid =ICE_RXDID_FLEX_NIC ;struct ice_rlan_ctx rlan_ctx;struct ice_hw *hw; -u32 regval;u16 pf_q;int err;
@@ -346,27 +346,16 @@ static int ice_setup_rx_ctx(struct ice_ring *ring)/* Rx queue threshold in units of 64 */ rlan_ctx.lrxqthresh =1 ; -/* Enable Flexible Descriptors in the queue context which -* allows this driver to select a specific receive descriptor format -*/ - regval =rd32 (hw,QRXFLXP_CNTXT (pf_q)); -if (vsi->type !=ICE_VSI_VF ) { - regval |= (rxdid <<QRXFLXP_CNTXT_RXDID_IDX_S ) & -QRXFLXP_CNTXT_RXDID_IDX_M ; - -/* increasing context priority to pick up profile ID; -* default is 0x01; setting to 0x03 to ensure profile -* is programming if prev context is of same priority -*/ - regval |= (0x03 <<QRXFLXP_CNTXT_RXDID_PRIO_S ) & -QRXFLXP_CNTXT_RXDID_PRIO_M ; - - }else { - regval &= ~(QRXFLXP_CNTXT_RXDID_IDX_M | -QRXFLXP_CNTXT_RXDID_PRIO_M | -QRXFLXP_CNTXT_TS_M ); - } -wr32 (hw,QRXFLXP_CNTXT (pf_q), regval); +/* Enable Flexible Descriptors in the queue context which +* allows this driver to select a specific receive descriptor format +* increasing context priority to pick up profile ID; default is 0x01; +* setting to 0x03 to ensure profile is programming if prev context is +* of same priority +*/ +if (vsi->type !=ICE_VSI_VF ) +ice_write_qrxflxp_cntxt (hw, pf_q, rxdid,0x3 ); +else +ice_write_qrxflxp_cntxt (hw, pf_q,ICE_RXDID_LEGACY_1 ,0x3 );/* Absolute queue number out of 2K needs to be passed */ err =ice_write_rxq_ctx (hw, &rlan_ctx, pf_q);
drivers/net/ethernet/intel/ice/ice_lib.c +26 -0
@@ -1630,6 +1630,32 @@ void ice_vsi_cfg_frame_size(struct ice_vsi *vsi) } } +/** +* ice_write_qrxflxp_cntxt - write/configure QRXFLXP_CNTXT register +* @hw: HW pointer +* @pf_q: index of the Rx queue in the PF's queue space +* @rxdid: flexible descriptor RXDID +* @prio: priority for the RXDID for this queue +*/ +void +ice_write_qrxflxp_cntxt (struct ice_hw *hw,u16 pf_q,u32 rxdid,u32 prio) +{ +int regval =rd32 (hw,QRXFLXP_CNTXT (pf_q)); + +/* clear any previous values */ + regval &= ~(QRXFLXP_CNTXT_RXDID_IDX_M | +QRXFLXP_CNTXT_RXDID_PRIO_M | +QRXFLXP_CNTXT_TS_M ); + + regval |= (rxdid <<QRXFLXP_CNTXT_RXDID_IDX_S ) & +QRXFLXP_CNTXT_RXDID_IDX_M ; + + regval |= (prio <<QRXFLXP_CNTXT_RXDID_PRIO_S ) & +QRXFLXP_CNTXT_RXDID_PRIO_M ; + +wr32 (hw,QRXFLXP_CNTXT (pf_q), regval); +} +/** * ice_vsi_cfg_rxqs - Configure the VSI for Rx * @vsi: the VSI being configured
drivers/net/ethernet/intel/ice/ice_lib.h +3 -0
@@ -76,6 +76,9 @@ int ice_vsi_rebuild(struct ice_vsi *vsi, bool init_vsi);bool ice_is_reset_in_progress (unsigned long *state); +void +ice_write_qrxflxp_cntxt (struct ice_hw *hw,u16 pf_q,u32 rxdid,u32 prio); +void ice_vsi_put_qs (struct ice_vsi *vsi);void ice_vsi_dis_irq (struct ice_vsi *vsi);
Signature · 1 line
2.20.1
Bowers
PATCH 2/9 ice: Always clear QRXFLXP_CNTXT before writing new value
Quoted 14 lines
-----Original Message-----
From: Intel-wired-lan <[email protected]> On Behalf Of Tony Nguyen
Sent: Friday, May 15, 2020 5:55 PM
To: intel-wired-lan at lists.osuosl.org
Subject: [Intel-wired-lan] [PATCH S46 2/9] ice: Always clearQRXFLXP_CNTXTbefore writing new valueFrom: Brett Creeley <[email protected]>
Always clear the previous value in
QRXFLXP_CNTXTbefore writing a new value. This will make it so re-used queues will not accidentally take the previously configured settings.
Quoted 7 lines
Signed-off-by Brett Creeley <[email protected]>Signed-off-by Tony Nguyen <[email protected]>--- drivers/net/ethernet/intel/ice/ice_base.c | 33 ++++++++--------------- drivers/net/ethernet/intel/ice/ice_lib.c | 26 ++++++++++++++++++ drivers/net/ethernet/intel/ice/ice_lib.h | 3 +++ 3 files changed, 40 insertions(+), 22 deletions(-)
Tony Nguyen
maintainerPATCH 3/9 ice: Fix inability to set channels when down
In reply to Tony NguyenFrom: Jesse Brandeburg <[email protected]>
Currently the driver prevents a user from doing
modprobe ice
ethtool -L eth0 combined 5
ip link set eth0 up
The ethtool command fails, because the driver is checking to see if the interface is down before allowing the get_channels to proceed (even for a set_channels).
Remove this check and allow the user to configure the interface before bringing it up, which is a much better usability case.
--- drivers/net/ethernet/intel/ice/ice_ethtool.c | 4 ---- 1 file changed, 4 deletions(-)
drivers/net/ethernet/intel/ice/ice_ethtool.c +0 -4
@@ -3189,10 +3189,6 @@ ice_get_channels(struct net_device *dev, struct ethtool_channels *ch)struct ice_vsi *vsi = np->vsi;struct ice_pf *pf = vsi->back; -/* check to see if VSI is active */ -if (test_bit (__ICE_DOWN, vsi->state)) -return ; -/* report maximum channels */ ch->max_rx =ice_get_max_rxq (pf); ch->max_tx =ice_get_max_txq (pf);
Signature · 1 line
2.20.1
Bowers
PATCH 3/9 ice: Fix inability to set channels when down
Quoted 17 lines
-----Original Message-----
From: Intel-wired-lan <[email protected]> On Behalf Of Tony Nguyen
Sent: Friday, May 15, 2020 5:55 PM
To: intel-wired-lan at lists.osuosl.org
Subject: [Intel-wired-lan] [PATCH S46 3/9] ice: Fix inability to set channels when downFrom: Jesse Brandeburg <[email protected]>
Currently the driver prevents a user from doing modprobe ice ethtool -L eth0 combined 5 ip link set eth0 up
The ethtool command fails, because the driver is checking to see if the interface is down before allowing the
get_channelsto proceed (even for aset_channels).
Quoted 8 lines
Remove this check and allow the user to configure the interface before bringing it up, which is a much better usability case.
Fixes 87324e747fde ("ice: Implement ethtool ops for channels")Signed-off-by Jesse Brandeburg <[email protected]>--- drivers/net/ethernet/intel/ice/ice_ethtool.c | 4 ---- 1 file changed, 4 deletions(-)
Tony Nguyen
maintainerPATCH 4/9 ice: Allow VF to request reset as soon as it's initialized
In reply to Tony NguyenFrom: Brett Creeley <[email protected]>
A VF driver has the ability to request reset via VIRTCHNL_OP_RESET_VF. This is a required step in VF driver load. Currently, the PF is only allowing a VF to request reset using this method after the VF has already communicated resources via VIRTCHNL_OP_GET_VF_RESOURCES. However, this is incorrect because the VF can request reset before requesting resources. Fix this by allowing the VF to request a reset once it has been initialized.
--- drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c +1 -1
@@ -1989,7 +1989,7 @@ static int ice_vc_get_vf_res_msg(struct ice_vf *vf, u8 *msg)*/ static void ice_vc_reset_vf_msg (struct ice_vf *vf) { -if (test_bit (ICE_VF_STATE_ACTIVE , vf->vf_states)) +if (test_bit (ICE_VF_STATE_INIT , vf->vf_states))ice_reset_vf (vf, false); }
Signature · 1 line
2.20.1
Bowers
PATCH 4/9 ice: Allow VF to request reset as soon as it's initialized
Quoted 18 lines
-----Original Message-----
From: Intel-wired-lan <[email protected]> On Behalf Of Tony Nguyen
Sent: Friday, May 15, 2020 5:55 PM
To: intel-wired-lan at lists.osuosl.org
Subject: [Intel-wired-lan] [PATCH S46 4/9] ice: Allow VF to request reset as soon as it's initializedFrom: Brett Creeley <[email protected]>
A VF driver has the ability to request reset via
VIRTCHNL_OP_RESET_VF. This is a required step in VF driver load. Currently, the PF is only allowing a VF to request reset using this method after the VF has already communicated resources viaVIRTCHNL_OP_GET_VF_RESOURCES.
However, this is incorrect because the VF can request reset before requesting resources. Fix this by allowing the VF to request a reset once it has been initialized.
Quoted 4 lines
Signed-off-by Brett Creeley <[email protected]>--- drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Tony Nguyen
maintainerPATCH 5/9 ice: fix function signature style format
In reply to Tony NguyenFrom: Bruce Allan <[email protected]>
Where possible, cuddle multiple lines of function signatures to be consistent throughout the code.
--- drivers/net/ethernet/intel/ice/ice_controlq.c | 3 +-- drivers/net/ethernet/intel/ice/ice_sched.c | 12 ++++-------- drivers/net/ethernet/intel/ice/ice_switch.c | 9 +++------ 3 files changed, 8 insertions(+), 16 deletions(-)
drivers/net/ethernet/intel/ice/ice_controlq.c +1 -2
@@ -769,8 +769,7 @@ enum ice_status ice_create_all_ctrlq(struct ice_hw *hw)* * Destroys the send and receive queue locks for a given control queue. */ -static void -ice_destroy_ctrlq_locks (struct ice_ctl_q_info *cq) +static void ice_destroy_ctrlq_locks (struct ice_ctl_q_info *cq) {mutex_destroy (&cq->sq_lock);mutex_destroy (&cq->rq_lock);
drivers/net/ethernet/intel/ice/ice_sched.c +4 -8
@@ -1771,8 +1771,7 @@ ice_sched_cfg_vsi(struct ice_port_info *pi, u16 vsi_handle, u8 tc, u16 maxqs,* This function removes single aggregator VSI info entry from * aggregator list. */ -static void -ice_sched_rm_agg_vsi_info (struct ice_port_info *pi,u16 vsi_handle) +static void ice_sched_rm_agg_vsi_info (struct ice_port_info *pi,u16 vsi_handle) {struct ice_sched_agg_info *agg_info;struct ice_sched_agg_info *atmp;
@@ -2006,8 +2005,7 @@ ice_sched_cfg_node_bw_alloc(struct ice_hw *hw, struct ice_sched_node *node,* * Save or clear CIR bandwidth (BW) in the passed param bw_t_info. */ -static void -ice_set_clear_cir_bw (struct ice_bw_type_info *bw_t_info,u32 bw) +static void ice_set_clear_cir_bw (struct ice_bw_type_info *bw_t_info,u32 bw) {if (bw ==ICE_SCHED_DFLT_BW ) {clear_bit (ICE_BW_TYPE_CIR , bw_t_info->bw_t_bitmap);
@@ -2026,8 +2024,7 @@ ice_set_clear_cir_bw(struct ice_bw_type_info *bw_t_info, u32 bw)* * Save or clear EIR bandwidth (BW) in the passed param bw_t_info. */ -static void -ice_set_clear_eir_bw (struct ice_bw_type_info *bw_t_info,u32 bw) +static void ice_set_clear_eir_bw (struct ice_bw_type_info *bw_t_info,u32 bw) {if (bw ==ICE_SCHED_DFLT_BW ) {clear_bit (ICE_BW_TYPE_EIR , bw_t_info->bw_t_bitmap);
@@ -2052,8 +2049,7 @@ ice_set_clear_eir_bw(struct ice_bw_type_info *bw_t_info, u32 bw)* * Save or clear shared bandwidth (BW) in the passed param bw_t_info. */ -static void -ice_set_clear_shared_bw (struct ice_bw_type_info *bw_t_info,u32 bw) +static void ice_set_clear_shared_bw (struct ice_bw_type_info *bw_t_info,u32 bw) {if (bw ==ICE_SCHED_DFLT_BW ) {clear_bit (ICE_BW_TYPE_SHARED , bw_t_info->bw_t_bitmap);
drivers/net/ethernet/intel/ice/ice_switch.c +3 -6
@@ -1639,8 +1639,7 @@ ice_remove_rule_internal(struct ice_hw *hw, u8 recp_id,* check for duplicates in this case, removing duplicates from a given * list should be taken care of in the caller of this function. */ -enum ice_status -ice_add_mac (struct ice_hw *hw,struct list_head *m_list) +enum ice_status ice_add_mac (struct ice_hw *hw,struct list_head *m_list) {struct ice_aqc_sw_rules_elem *s_rule, *r_iter;struct ice_fltr_list_entry *m_list_itr;
@@ -1941,8 +1940,7 @@ ice_add_vlan_internal(struct ice_hw *hw, struct ice_fltr_list_entry *f_entry)* @hw: pointer to the hardware structure * @v_list: list of VLAN entries and forwarding information */ -enum ice_status -ice_add_vlan (struct ice_hw *hw,struct list_head *v_list) +enum ice_status ice_add_vlan (struct ice_hw *hw,struct list_head *v_list) {struct ice_fltr_list_entry *v_list_itr;
@@ -2172,8 +2170,7 @@ ice_find_ucast_rule_entry(struct ice_hw *hw, u8 recp_id,* the entries passed into m_list were added previously. It will not attempt to * do a partial remove of entries that were found. */ -enum ice_status -ice_remove_mac (struct ice_hw *hw,struct list_head *m_list) +enum ice_status ice_remove_mac (struct ice_hw *hw,struct list_head *m_list) {struct ice_fltr_list_entry *list_itr, *tmp;struct mutex *rule_lock;/* Lock to protect filter rule list */
Signature · 1 line
2.20.1
Bowers
PATCH 5/9 ice: fix function signature style format
Quoted 13 lines
-----Original Message-----
From: Intel-wired-lan <[email protected]> On Behalf Of Tony Nguyen
Sent: Friday, May 15, 2020 5:55 PM
To: intel-wired-lan at lists.osuosl.org
Subject: [Intel-wired-lan] [PATCH S46 5/9] ice: fix function signature style formatFrom: Bruce Allan <[email protected]>
Where possible, cuddle multiple lines of function signatures to be consistent throughout the code.
Quoted 6 lines
Signed-off-by Bruce Allan <[email protected]>--- drivers/net/ethernet/intel/ice/ice_controlq.c | 3 +-- drivers/net/ethernet/intel/ice/ice_sched.c | 12 ++++-------- drivers/net/ethernet/intel/ice/ice_switch.c | 9 +++------ 3 files changed, 8 insertions(+), 16 deletions(-)
Tony Nguyen
maintainerPATCH 6/9 ice: fix PCI device serial number to be lowercase values
In reply to Tony NguyenFrom: Paul M Stillwell Jr <[email protected]>
Commit ceb2f00707f9 ("ice: Use pci_get_dsn()") changed the code to use a new function to get the Device Serial Number. It also changed the case of the filename for loading a package on a specific NIC from lowercase to uppercase. Change the filename back to lowercase since that is what we specified.
--- drivers/net/ethernet/intel/ice/ice_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/intel/ice/ice_main.c +1 -1
@@ -3273,7 +3273,7 @@ static char *ice_get_opt_fw_name(struct ice_pf *pf)if (!opt_fw_filename)return NULL ; -snprintf (opt_fw_filename,NAME_MAX ,"%sice-%016llX.pkg" , +snprintf (opt_fw_filename,NAME_MAX ,"%sice-%016llx.pkg" ,ICE_DDP_PKG_PATH , dsn);return opt_fw_filename;
Signature · 1 line
2.20.1
Bowers
PATCH 6/9 ice: fix PCI device serial number to be lowercase values
Quoted 16 lines
-----Original Message-----
From: Intel-wired-lan <[email protected]> On Behalf Of Tony Nguyen
Sent: Friday, May 15, 2020 5:55 PM
To: intel-wired-lan at lists.osuosl.org
Subject: [Intel-wired-lan] [PATCH S46 6/9] ice: fix PCI device serial number to be lowercase valuesFrom: Paul M Stillwell Jr <[email protected]>
Commit
ceb2f00707f9("ice: Usepci_get_dsn()") changed the code to use a new function to get the Device Serial Number. It also changed the case of the filename for loading a package on a specific NIC from lowercase to uppercase. Change the filename back to lowercase since that is what we specified.
Quoted 5 lines
Fixes ceb2f00707f9 ("ice: Use pci_get_dsn()")Signed-off-by Paul M Stillwell Jr <[email protected]>--- drivers/net/ethernet/intel/ice/ice_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Tony Nguyen
maintainerPATCH 7/9 ice: Use coalesce values from q_vector 0 when increasing q_vectors
In reply to Tony NguyenFrom: Brett Creeley <[email protected]>
Currently when a VSI is built (i.e. reset, set channels, etc.) the coalesce settings will be preserved in most cases. However, when the number of q_vectors are increased the settings for the new q_vectors will be set to the driver defaults of AIM on, Rx/Tx ITR 50, and INTRL 0. This is causing issues with how the ethtool layer gets the current coalesce settings since it only uses q_vector 0. So, assume that the user set the coalesce settings globally (i.e. ethtool -C eth0) and use q_vector 0's settings for all of the new q_vectors.
--- drivers/net/ethernet/intel/ice/ice_lib.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-)
drivers/net/ethernet/intel/ice/ice_lib.c +6 -8
@@ -2753,15 +2753,13 @@ ice_vsi_rebuild_set_coalesce(struct ice_vsi *vsi,ice_vsi_rebuild_update_coalesce (vsi->q_vectors[i], &coalesce[i]); -for (; i < vsi->num_q_vectors; i++) { -struct ice_coalesce_stored coalesce_dflt = { - .itr_tx =ICE_DFLT_TX_ITR , - .itr_rx =ICE_DFLT_RX_ITR , - .intrl =0 - }; +/* number of q_vectors increased, so assume coalesce settings were +* changed globally (i.e. ethtool -C eth0 instead of per-queue) and use +* the previous settings from q_vector 0 for all of the new q_vectors +*/ +for (; i < vsi->num_q_vectors; i++)ice_vsi_rebuild_update_coalesce (vsi->q_vectors[i], - &coalesce_dflt); - } + &coalesce[0 ]); }/**
Signature · 1 line
2.20.1
Bowers
PATCH 7/9 ice: Use coalesce values from q_vector 0 when increasing q_vectors
Quoted 19 lines
-----Original Message-----
From: Intel-wired-lan <[email protected]> On Behalf Of Tony Nguyen
Sent: Friday, May 15, 2020 5:55 PM
To: intel-wired-lan at lists.osuosl.org
Subject: [Intel-wired-lan] [PATCH S46 7/9] ice: Use coalesce values fromq_vector0 when increasingq_vectorsFrom: Brett Creeley <[email protected]>
Currently when a VSI is built (i.e. reset, set channels, etc.) the coalesce settings will be preserved in most cases. However, when the number of
q_vectorsare increased the settings for the newq_vectorswill be set to the driver defaults of AIM on, Rx/Tx ITR 50, and INTRL 0.
This is causing issues with how the ethtool layer gets the current coalesce settings since it only usesq_vector0. So, assume that the user set the coalesce settings globally (i.e. ethtool -C eth0) and useq_vector0's settings for all of the newq_vectors.
Quoted 4 lines
Signed-off-by Brett Creeley <[email protected]>--- drivers/net/ethernet/intel/ice/ice_lib.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-)
Tony Nguyen
maintainerPATCH 8/9 ice: fix aRFS after flow director delete
In reply to Tony NguyenFrom: Henry Tieman <[email protected]>
The logic was missing for adding back perfect flows after flow director filter delete. The code now adds perfect flows into the HW tables after filter delete.
--- .../net/ethernet/intel/ice/ice_ethtool_fdir.c | 27 ++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-)
drivers/net/ethernet/intel/ice/ice_ethtool_fdir.c +26 -1
@@ -1363,6 +1363,31 @@ void ice_vsi_manage_fdir(struct ice_vsi *vsi, bool ena)mutex_unlock (&hw->fdir_fltr_lock); } +/** +* ice_fdir_do_rem_flow - delete flow and possibly add perfect flow +* @pf: PF structure +* @flow_type: FDir flow type to release +*/ +static void +ice_fdir_do_rem_flow (struct ice_pf *pf,enum ice_fltr_ptype flow_type) +{ +struct ice_hw *hw = &pf->hw; +bool need_perfect = false; + +if (flow_type ==ICE_FLTR_PTYPE_NONF_IPV4_TCP || + flow_type ==ICE_FLTR_PTYPE_NONF_IPV4_UDP || + flow_type ==ICE_FLTR_PTYPE_NONF_IPV6_TCP || + flow_type ==ICE_FLTR_PTYPE_NONF_IPV6_UDP ) + need_perfect = true; + +if (need_perfect &&test_bit (flow_type, hw->fdir_perfect_fltr)) +return ; + +ice_fdir_rem_flow (hw,ICE_BLK_FD , flow_type); +if (need_perfect) +ice_create_init_fdir_rule (pf, flow_type); +} +/** * ice_fdir_update_list_entry - add or delete a filter from the filter list * @pf: PF structure
@@ -1393,7 +1418,7 @@ ice_fdir_update_list_entry(struct ice_pf *pf, struct ice_fdir_fltr *input,/* we just deleted the last filter of flow_type so we * should also delete the HW filter info. */ -ice_fdir_rem_flow (hw,ICE_BLK_FD , old_fltr->flow_type); +ice_fdir_do_rem_flow (pf, old_fltr->flow_type);list_del (&old_fltr->fltr_node);devm_kfree (ice_hw_to_dev (hw), old_fltr); }
Signature · 1 line
2.20.1
Bowers
PATCH 8/9 ice: fix aRFS after flow director delete
Quoted 10 lines
-----Original Message-----
From: Intel-wired-lan <[email protected]> On Behalf Of Tony Nguyen
Sent: Friday, May 15, 2020 5:55 PM
To: intel-wired-lan at lists.osuosl.org
Subject: [Intel-wired-lan] [PATCH S46 8/9] ice: fix aRFS after flow director deleteFrom: Henry Tieman <[email protected]>
Quoted 8 lines
The logic was missing for adding back perfect flows after flow director filter delete. The code now adds perfect flows into the HW tables after filter delete.
Signed-off-by Henry Tieman <[email protected]>--- .../net/ethernet/intel/ice/ice_ethtool_fdir.c | 27 ++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-)
Tony Nguyen
maintainerPATCH 9/9 ice: Ignore EMODE when setting PHY config
In reply to Tony NguyenFrom: Chinh T Cao <[email protected]>
When setting the PHY cfg (CQ cmd 0x0601), if the firmware responds with an EMODE error, software will ignore the error as it simply means that manageability (ex: BMC) is in control of the link and that the new setting may not be applied.
--- drivers/net/ethernet/intel/ice/ice_adminq_cmd.h | 1 + drivers/net/ethernet/intel/ice/ice_common.c | 7 ++++++- drivers/net/ethernet/intel/ice/ice_main.c | 2 ++ 3 files changed, 9 insertions(+), 1 deletion(-)
drivers/net/ethernet/intel/ice/ice_adminq_cmd.h +1 -0
@@ -1858,6 +1858,7 @@ enum ice_aq_err {ICE_AQ_RC_EINVAL =14 ,/* Invalid argument */ ICE_AQ_RC_ENOSPC =16 ,/* No space left or allocation failure */ ICE_AQ_RC_ENOSYS =17 ,/* Function not implemented */ +ICE_AQ_RC_EMODE =21 ,/* Op not allowed in current dev mode */ ICE_AQ_RC_ENOSEC =24 ,/* Missing security manifest */ ICE_AQ_RC_EBADSIG =25 ,/* Bad RSA signature */ ICE_AQ_RC_ESVN = 26, /* SVN number prohibits this package */
drivers/net/ethernet/intel/ice/ice_common.c +6 -1
@@ -2248,6 +2248,7 @@ ice_aq_set_phy_cfg(struct ice_hw *hw, u8 lport, struct ice_aqc_set_phy_cfg_data *cfg, struct ice_sq_cd *cd) { struct ice_aq_desc desc; +enum ice_status status;if (!cfg)return ICE_ERR_PARAM ;
@@ -2276,7 +2277,11 @@ ice_aq_set_phy_cfg(struct ice_hw *hw, u8 lport,ice_debug (hw,ICE_DBG_LINK ,"eeer_value = 0x%x\n" , cfg->eeer_value);ice_debug (hw,ICE_DBG_LINK ,"link_fec_opt = 0x%x\n" , cfg->link_fec_opt); -return ice_aq_send_cmd (hw, &desc, cfg,sizeof (*cfg), cd); + status =ice_aq_send_cmd (hw, &desc, cfg,sizeof (*cfg), cd); +if (hw->adminq.sq_last_status ==ICE_AQ_RC_EMODE ) + status =0 ; + +return status; }/**
drivers/net/ethernet/intel/ice/ice_main.c +2 -0
@@ -5245,6 +5245,8 @@ const char *ice_aq_str(enum ice_aq_err aq_err)return "ICE_AQ_RC_ENOSPC" ;case ICE_AQ_RC_ENOSYS :return "ICE_AQ_RC_ENOSYS" ; +case ICE_AQ_RC_EMODE : +return "ICE_AQ_RC_EMODE" ;case ICE_AQ_RC_ENOSEC :return "ICE_AQ_RC_ENOSEC" ;case ICE_AQ_RC_EBADSIG :
Signature · 1 line
2.20.1
Bowers
PATCH 9/9 ice: Ignore EMODE when setting PHY config
Quoted 15 lines
-----Original Message-----
From: Intel-wired-lan <[email protected]> On Behalf Of Tony Nguyen
Sent: Friday, May 15, 2020 5:55 PM
To: intel-wired-lan at lists.osuosl.org
Subject: [Intel-wired-lan] [PATCH S46 9/9] ice: Ignore EMODE when setting PHY configFrom: Chinh T Cao <[email protected]>
When setting the PHY cfg (CQ cmd
0x0601), if the firmware responds with an EMODE error, software will ignore the error as it simply means that manageability (ex: BMC) is in control of the link and that the new setting may not be applied.
Quoted 7 lines
Signed-off-by Chinh T Cao <[email protected]>Signed-off-by Tony Nguyen <[email protected]>--- drivers/net/ethernet/intel/ice/ice_adminq_cmd.h | 1 + drivers/net/ethernet/intel/ice/ice_common.c | 7 ++++++- drivers/net/ethernet/intel/ice/ice_main.c | 2 ++ 3 files changed, 9 insertions(+), 1 deletion(-)
Bowers
PATCH 1/9 ice: Reset VF for all port VLAN changes from host
In reply to Tony NguyenQuoted 17 lines
-----Original Message-----
From: Intel-wired-lan <[email protected]> On Behalf Of Tony Nguyen
Sent: Friday, May 15, 2020 5:55 PM
To: intel-wired-lan at lists.osuosl.org
Subject: [Intel-wired-lan] [PATCH S46 1/9] ice: Reset VF for all port VLAN changes from hostFrom: Brett Creeley <[email protected]>
Currently the PF is modifying the VF's port VLAN on the fly when configured via iproute. This is okay for most cases, but if the VF already has guest VLANs configured the PF has to remove all of those filters so only VLAN tagged traffic that matches the port VLAN will pass. Instead of adding functionality to track which guest VLANs have been added, just reset the VF each time port VLAN parameters are modified.
Quoted 4 lines
Signed-off-by Brett Creeley <[email protected]>--- .../net/ethernet/intel/ice/ice_virtchnl_pf.c | 42 +++---------------- 1 file changed, 5 insertions(+), 37 deletions(-)