Skip to contentSkip to conversation

perf stat: Support overall statistics for interval mode

PATCH Applied Jin Yao 3 participants 8 messages May 20, 2020 perf events

lore
Share & tools
lore

Jin Yao

author
#0 lore raw

v6 cover perf stat: Support overall statistics for interval mode

Currently perf-stat supports to print counts at regular interval (-I), but it's not very easy for user to get the overall statistics.

With this patchset, it supports to report the summary at the end of interval output.

For example,

 root@kbl-ppc:~# perf stat -e cycles -I1000 --interval-count 2
 #           time             counts unit events
      1.000412064          2,281,114      cycles
      2.001383658          2,547,880      cycles

Performance counter stats for 'system wide':

          4,828,994      cycles

        2.002860349 seconds time elapsed
 root@kbl-ppc:~# perf stat -e cycles,instructions -I1000 --interval-count 2
 #           time             counts unit events
      1.000389902          1,536,093      cycles
      1.000389902            420,226      instructions              #    0.27  insn per cycle
      2.001433453          2,213,952      cycles
      2.001433453            735,465      instructions              #    0.33  insn per cycle

Performance counter stats for 'system wide':

          3,750,045      cycles
          1,155,691      instructions              #    0.31  insn per cycle

        2.003023361 seconds time elapsed
 root@kbl-ppc:~# perf stat -M CPI,IPC -I1000 --interval-count 2
 #           time             counts unit events
      1.000435121            905,303      inst_retired.any          #      2.9 CPI
      1.000435121          2,663,333      cycles
      1.000435121            914,702      inst_retired.any          #      0.3 IPC
      1.000435121          2,676,559      cpu_clk_unhalted.thread
      2.001615941          1,951,092      inst_retired.any          #      1.8 CPI
      2.001615941          3,551,357      cycles
      2.001615941          1,950,837      inst_retired.any          #      0.5 IPC
      2.001615941          3,551,044      cpu_clk_unhalted.thread

Performance counter stats for 'system wide':

          2,856,395      inst_retired.any          #      2.2 CPI
          6,214,690      cycles
          2,865,539      inst_retired.any          #      0.5 IPC
          6,227,603      cpu_clk_unhalted.thread
        2.003403078 seconds time elapsed

v6:
---
1. Add comments in perf_evlist__save_aggr_prev_raw_counts.
2. Move init_stats(&walltime_nsecs_stats) under interval condition check.

Following patches are changed in v6.
perf stat: Save aggr value to first member of prev_raw_counts perf stat: Report summary for interval mode

v5:
---
1. Create new patch "perf stat: Save aggr value to first member of prev_raw_counts".

2. Call perf_evlist__save_aggr_prev_raw_counts to save aggr value to first member of prev_raw_counts for AGGR_GLOBAL. Then next, perf_stat_process_counter can create aggr values from per cpu values.

Following patches are impacted in v5:
perf stat: Copy counts from prev_raw_counts to evsel->counts perf stat: Save aggr value to first member of prev_raw_counts perf stat: Report summary for interval mode

v4:
---
1. Create runtime_stat_reset.

2. Zero the aggr in perf_counts__reset and use it to reset prev_raw_counts.

3. Move affinity setup and read_counter_cpu to a new function read_affinity_counters. It's only called when stat_config.summary is not set.

v3:
---
1. 'perf stat: Fix wrong per-thread runtime stat for interval mode' is a new patch which fixes an existing issue found in test.

2. We use the prev_raw_counts for summary counts. Drop the summary_counts in v2.

3. Fix some issues.

v2:
---
Rebase to perf/core branch

Jin Yao (5):
perf stat: Fix wrong per-thread runtime stat for interval mode perf counts: Reset prev_raw_counts counts
perf stat: Copy counts from prev_raw_counts to evsel->counts perf stat: Save aggr value to first member of prev_raw_counts perf stat: Report summary for interval mode

 tools/perf/builtin-stat.c | 101 +++++++++++++++++++++++++-------------
 tools/perf/util/counts.c  |   4 +-
 tools/perf/util/counts.h  |   1 +
 tools/perf/util/stat.c    |  53 +++++++++++++++++---
 tools/perf/util/stat.h    |   3 ++
 5 files changed, 122 insertions(+), 40 deletions(-)
Signature · 1 line
2.17.1
author
#1 lore raw

PATCH v6 1/5 perf stat: Fix wrong per-thread runtime stat for interval mode

root@kbl-ppc:~# perf stat --per-thread -e cycles,instructions -I1000 --interval-count 2
     1.004171683             perf-3696              8,747,311      cycles
        ...
     1.004171683             perf-3696                691,730      instructions              #    0.08  insn per cycle
        ...
     2.006490373             perf-3696              1,749,936      cycles
        ...
     2.006490373             perf-3696              1,484,582      instructions              #    0.28  insn per cycle
        ...

Let's see interval 2.006490373

perf-3696              1,749,936      cycles
perf-3696              1,484,582      instructions              #    0.28  insn per cycle

insn per cycle = 1,484,582 / 1,749,936 = 0.85.
But now it's 0.28, that's not correct.

stat_config.stats[] records the per-thread runtime stat. But for interval mode, it should be reset for each interval.

So now, with this patch,

root@kbl-ppc:~# perf stat --per-thread -e cycles,instructions -I1000 --interval-count 2
     1.005818121             perf-8633              9,898,045      cycles
        ...
     1.005818121             perf-8633                693,298      instructions              #    0.07  insn per cycle
        ...
     2.007863743             perf-8633              1,551,619      cycles
        ...
     2.007863743             perf-8633              1,317,514      instructions              #    0.85  insn per cycle
        ...

Let's check interval 2.007863743.

insn per cycle = 1,317,514 / 1,551,619 = 0.85. It's correct.

This patch creates runtime_stat_reset, places it next to untime_stat_new/runtime_stat_delete and moves all runtime_stat functions before process_interval.

v4:
---
Create runtime_stat_reset.

Fixes commit 14e72a21c783 ("perf stat: Update or print per-thread stats")
---
 tools/perf/builtin-stat.c | 70 +++++++++++++++++++++++----------------
 1 file changed, 41 insertions(+), 29 deletions(-)
tools/perf/builtin-stat.c +41 -29
index e0c1ad23c768..f3b3a59ac7d2 100644
@@ -351,6 +351,46 @@ static void read_counters(struct timespec *rs)
 	}
 }
 
+static int runtime_stat_new(struct perf_stat_config *config, int nthreads)
+{
+	int i;
+
+	config->stats = calloc(nthreads, sizeof(struct runtime_stat));
+	if (!config->stats)
+		return -1;
+
+	config->stats_num = nthreads;
+
+	for (i = 0; i < nthreads; i++)
+		runtime_stat__init(&config->stats[i]);
+
+	return 0;
+}
+
+static void runtime_stat_delete(struct perf_stat_config *config)
+{
+	int i;
+
+	if (!config->stats)
+		return;
+
+	for (i = 0; i < config->stats_num; i++)
+		runtime_stat__exit(&config->stats[i]);
+
+	zfree(&config->stats);
+}
+
+static void runtime_stat_reset(struct perf_stat_config *config)
+{
+	int i;
+
+	if (!config->stats)
+		return;
+
+	for (i = 0; i < config->stats_num; i++)
+		perf_stat__reset_shadow_per_stat(&config->stats[i]);
+}
+
 static void process_interval(void)
 {
 	struct timespec ts, rs;
@@ -359,6 +399,7 @@ static void process_interval(void)
 	diff_timespec(&rs, &ts, &ref_time);
 
 	perf_stat__reset_shadow_per_stat(&rt_stat);
+	runtime_stat_reset(&stat_config);
 	read_counters(&rs);
 
 	if (STAT_RECORD) {
@@ -1737,35 +1778,6 @@ int process_cpu_map_event(struct perf_session *session,
 	return set_maps(st);
 }
 
-static int runtime_stat_new(struct perf_stat_config *config, int nthreads)
-{
-	int i;
-
-	config->stats = calloc(nthreads, sizeof(struct runtime_stat));
-	if (!config->stats)
-		return -1;
-
-	config->stats_num = nthreads;
-
-	for (i = 0; i < nthreads; i++)
-		runtime_stat__init(&config->stats[i]);
-
-	return 0;
-}
-
-static void runtime_stat_delete(struct perf_stat_config *config)
-{
-	int i;
-
-	if (!config->stats)
-		return;
-
-	for (i = 0; i < config->stats_num; i++)
-		runtime_stat__exit(&config->stats[i]);
-
-	zfree(&config->stats);
-}
-
 static const char * const stat_report_usage[] = {
 	"perf stat report [<options>]",
 	NULL,
Signature · 1 line
2.17.1
author
#2 lore raw

PATCH v6 2/5 perf counts: Reset prev_raw_counts counts

In reply to Jin Yao

When we want to reset the evsel->prev_raw_counts, zeroing the aggr is not enough, we need to reset the perf_counts too.

The perf_counts__reset zeros the perf_counts, and it should zero the aggr too. This patch changes perf_counts__reset to non-static, and calls it in evsel__reset_prev_raw_counts to reset the prev_raw_counts.

v4:
---
Zeroing the aggr in perf_counts__reset and use it to reset prev_raw_counts.

---
 tools/perf/util/counts.c | 4 +++-
 tools/perf/util/counts.h | 1 +
 tools/perf/util/stat.c   | 7 ++-----
 3 files changed, 6 insertions(+), 6 deletions(-)
tools/perf/util/counts.c +3 -1
index 615c9f3e95cb..582f3aeaf5e4 100644
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <errno.h>
 #include <stdlib.h>
+#include <string.h>
 #include "evsel.h"
 #include "counts.h"
 #include <linux/zalloc.h>
@@ -42,10 +43,11 @@ void perf_counts__delete(struct perf_counts *counts)
 	}
 }
 
-static void perf_counts__reset(struct perf_counts *counts)
+void perf_counts__reset(struct perf_counts *counts)
 {
 	xyarray__reset(counts->loaded);
 	xyarray__reset(counts->values);
+	memset(&counts->aggr, 0, sizeof(struct perf_counts_values));
 }
 
 void evsel__reset_counts(struct evsel *evsel)
tools/perf/util/counts.h +1 -0
index 8f556c6d98fa..7ff36bf6d644 100644
@@ -37,6 +37,7 @@ perf_counts__set_loaded(struct perf_counts *counts, int cpu, int thread, bool lo
 
 struct perf_counts *perf_counts__new(int ncpus, int nthreads);
 void perf_counts__delete(struct perf_counts *counts);
+void perf_counts__reset(struct perf_counts *counts);
 
 void evsel__reset_counts(struct evsel *evsel);
 int evsel__alloc_counts(struct evsel *evsel, int ncpus, int nthreads);
tools/perf/util/stat.c +2 -5
index f4a44df9b221..e397815f0dfb 100644
@@ -163,11 +163,8 @@ static void evsel__free_prev_raw_counts(struct evsel *evsel)
 
 static void evsel__reset_prev_raw_counts(struct evsel *evsel)
 {
-	if (evsel->prev_raw_counts) {
-		evsel->prev_raw_counts->aggr.val = 0;
-		evsel->prev_raw_counts->aggr.ena = 0;
-		evsel->prev_raw_counts->aggr.run = 0;
-       }
+	if (evsel->prev_raw_counts)
+		perf_counts__reset(evsel->prev_raw_counts);
 }
 
 static int evsel__alloc_stats(struct evsel *evsel, bool alloc_raw)
Signature · 1 line
2.17.1
author
#3 lore raw

PATCH v6 3/5 perf stat: Copy counts from prev_raw_counts to evsel->counts

In reply to Jin Yao

It would be useful to support the overall statistics for perf-stat interval mode. For example, report the summary at the end of "perf-stat -I" output.

But since perf-stat can support many aggregation modes, such as --per-thread, --per-socket, -M and etc, we need a solution which doesn't bring much complexity.

The idea is to use 'evsel->prev_raw_counts' which is updated in each interval and it's saved with the latest counts. Before reporting the summary, we copy the counts from evsel->prev_raw_counts to evsel->counts, and next we just follow non-interval processing.

v5:
---
Don't save the previous aggr value to the member of [cpu0,thread0] in perf_counts. Originally that was a trick because the perf_stat_process_counter would create aggr values from per cpu values. But we don't need to do that all the time. We will handle it in next patch.

v4:
---
Change the commit message.
No functional change.

---
 tools/perf/util/stat.c | 24 ++++++++++++++++++++++++
 tools/perf/util/stat.h |  1 +
 2 files changed, 25 insertions(+)
tools/perf/util/stat.c +24 -0
index e397815f0dfb..aadc723ce871 100644
@@ -225,6 +225,30 @@ void perf_evlist__reset_prev_raw_counts(struct evlist *evlist)
 		evsel__reset_prev_raw_counts(evsel);
 }
 
+static void perf_evsel__copy_prev_raw_counts(struct evsel *evsel)
+{
+	int ncpus = evsel__nr_cpus(evsel);
+	int nthreads = perf_thread_map__nr(evsel->core.threads);
+
+	for (int thread = 0; thread < nthreads; thread++) {
+		for (int cpu = 0; cpu < ncpus; cpu++) {
+			*perf_counts(evsel->counts, cpu, thread) =
+				*perf_counts(evsel->prev_raw_counts, cpu,
+					     thread);
+		}
+	}
+
+	evsel->counts->aggr = evsel->prev_raw_counts->aggr;
+}
+
+void perf_evlist__copy_prev_raw_counts(struct evlist *evlist)
+{
+	struct evsel *evsel;
+
+	evlist__for_each_entry(evlist, evsel)
+		perf_evsel__copy_prev_raw_counts(evsel);
+}
+
 static void zero_per_pkg(struct evsel *counter)
 {
 	if (counter->per_pkg_mask)
tools/perf/util/stat.h +1 -0
index b4fdfaa7f2c0..62cf72c71869 100644
@@ -198,6 +198,7 @@ int perf_evlist__alloc_stats(struct evlist *evlist, bool alloc_raw);
 void perf_evlist__free_stats(struct evlist *evlist);
 void perf_evlist__reset_stats(struct evlist *evlist);
 void perf_evlist__reset_prev_raw_counts(struct evlist *evlist);
+void perf_evlist__copy_prev_raw_counts(struct evlist *evlist);
 
 int perf_stat_process_counter(struct perf_stat_config *config,
 			      struct evsel *counter);
Signature · 1 line
2.17.1
author
#4 lore raw

PATCH v6 4/5 perf stat: Save aggr value to first member of prev_raw_counts

In reply to Jin Yao

To collect the overall statistics for interval mode, we copy the counts from evsel->prev_raw_counts to evsel->counts.

For AGGR_GLOBAL mode, because the perf_stat_process_counter creates aggr values from per cpu values, but the per cpu values are 0, so the calculated aggr values will be always 0.

This patch uses a trick that saves the previous aggr value to the first member of perf_counts, then aggr calculation in process_counter_values can work correctly for AGGR_GLOBAL.

v6:
---
Add comments in perf_evlist__save_aggr_prev_raw_counts.

---
 tools/perf/util/stat.c | 20 ++++++++++++++++++++
 tools/perf/util/stat.h |  1 +
 2 files changed, 21 insertions(+)
tools/perf/util/stat.c +20 -0
index aadc723ce871..d23109c9bee9 100644
@@ -249,6 +249,26 @@ void perf_evlist__copy_prev_raw_counts(struct evlist *evlist)
 		perf_evsel__copy_prev_raw_counts(evsel);
 }
 
+void perf_evlist__save_aggr_prev_raw_counts(struct evlist *evlist)
+{
+	struct evsel *evsel;
+
+	/*
+	 * To collect the overall statistics for interval mode,
+	 * we copy the counts from evsel->prev_raw_counts to
+	 * evsel->counts. The perf_stat_process_counter creates
+	 * aggr values from per cpu values, but the per cpu values
+	 * are 0 for AGGR_GLOBAL. So we use a trick that saves the
+	 * previous aggr value to the first member of perf_counts,
+	 * then aggr calculation in process_counter_values can work
+	 * correctly.
+	 */
+	evlist__for_each_entry(evlist, evsel) {
+		*perf_counts(evsel->prev_raw_counts, 0, 0) =
+			evsel->prev_raw_counts->aggr;
+	}
+}
+
 static void zero_per_pkg(struct evsel *counter)
 {
 	if (counter->per_pkg_mask)
tools/perf/util/stat.h +1 -0
index 62cf72c71869..18ead55756cc 100644
@@ -199,6 +199,7 @@ void perf_evlist__free_stats(struct evlist *evlist);
 void perf_evlist__reset_stats(struct evlist *evlist);
 void perf_evlist__reset_prev_raw_counts(struct evlist *evlist);
 void perf_evlist__copy_prev_raw_counts(struct evlist *evlist);
+void perf_evlist__save_aggr_prev_raw_counts(struct evlist *evlist);
 
 int perf_stat_process_counter(struct perf_stat_config *config,
 			      struct evsel *counter);
Signature · 1 line
2.17.1
author
#5 lore raw

PATCH v6 5/5 perf stat: Report summary for interval mode

In reply to Jin Yao

Currently perf-stat supports to print counts at regular interval (-I), but it's not very easy for user to get the overall statistics.

The patch uses 'evsel->prev_raw_counts' to get counts for summary. Copy the counts to 'evsel->counts' after printing the interval results. Next, we just follow the non-interval processing.

Let's see some examples,

 root@kbl-ppc:~# perf stat -e cycles -I1000 --interval-count 2
 #           time             counts unit events
      1.000412064          2,281,114      cycles
      2.001383658          2,547,880      cycles

Performance counter stats for 'system wide':

          4,828,994      cycles

        2.002860349 seconds time elapsed
 root@kbl-ppc:~# perf stat -e cycles,instructions -I1000 --interval-count 2
 #           time             counts unit events
      1.000389902          1,536,093      cycles
      1.000389902            420,226      instructions              #    0.27  insn per cycle
      2.001433453          2,213,952      cycles
      2.001433453            735,465      instructions              #    0.33  insn per cycle

Performance counter stats for 'system wide':

          3,750,045      cycles
          1,155,691      instructions              #    0.31  insn per cycle

        2.003023361 seconds time elapsed
 root@kbl-ppc:~# perf stat -M CPI,IPC -I1000 --interval-count 2
 #           time             counts unit events
      1.000435121            905,303      inst_retired.any          #      2.9 CPI
      1.000435121          2,663,333      cycles
      1.000435121            914,702      inst_retired.any          #      0.3 IPC
      1.000435121          2,676,559      cpu_clk_unhalted.thread
      2.001615941          1,951,092      inst_retired.any          #      1.8 CPI
      2.001615941          3,551,357      cycles
      2.001615941          1,950,837      inst_retired.any          #      0.5 IPC
      2.001615941          3,551,044      cpu_clk_unhalted.thread

Performance counter stats for 'system wide':

          2,856,395      inst_retired.any          #      2.2 CPI
          6,214,690      cycles
          2,865,539      inst_retired.any          #      0.5 IPC
          6,227,603      cpu_clk_unhalted.thread
        2.003403078 seconds time elapsed

v6:
---
Move init_stats(&walltime_nsecs_stats) under interval condition check. walltime_nsecs_stats.val holds the last value so we just need to init the other fields of stats.

v5:
---
Call perf_evlist__save_aggr_prev_raw_counts to save aggr value to first member of prev_raw_counts for AGGR_GLOBAL. Then next, perf_stat_process_counter can create aggr values from per cpu values.

v4:
---
Move affinity setup and read_counter_cpu to a new function read_affinity_counters. It's only called when stat_config.summary is not set.

v3:
---
Use evsel->prev_raw_counts for summary counts

v2:
---
Rebase to perf/core branch

---
 tools/perf/builtin-stat.c | 31 +++++++++++++++++++++++++++----
 tools/perf/util/stat.c    |  2 +-
 tools/perf/util/stat.h    |  1 +
 3 files changed, 29 insertions(+), 5 deletions(-)
tools/perf/builtin-stat.c +27 -4
index f3b3a59ac7d2..2486c79f0f34 100644
@@ -314,14 +314,14 @@ static int read_counter_cpu(struct evsel *counter, struct timespec *rs, int cpu)
 	return 0;
 }
 
-static void read_counters(struct timespec *rs)
+static int read_affinity_counters(struct timespec *rs)
 {
 	struct evsel *counter;
 	struct affinity affinity;
 	int i, ncpus, cpu;
 
 	if (affinity__setup(&affinity) < 0)
-		return;
+		return -1;
 
 	ncpus = perf_cpu_map__nr(evsel_list->core.all_cpus);
 	if (!target__has_cpu(&target) || target__has_per_thread(&target))
@@ -341,6 +341,15 @@ static void read_counters(struct timespec *rs)
 		}
 	}
 	affinity__cleanup(&affinity);
+	return 0;
+}
+
+static void read_counters(struct timespec *rs)
+{
+	struct evsel *counter;
+
+	if (!stat_config.summary && (read_affinity_counters(rs) < 0))
+		return;
 
 	evlist__for_each_entry(evsel_list, counter) {
 		if (counter->err)
@@ -763,7 +772,21 @@ static int __run_perf_stat(int argc, const char **argv, int run_idx)
 	if (stat_config.walltime_run_table)
 		stat_config.walltime_run[run_idx] = t1 - t0;
 
-	update_stats(&walltime_nsecs_stats, t1 - t0);
+	if (interval) {
+		stat_config.interval = 0;
+		stat_config.summary = true;
+		init_stats(&walltime_nsecs_stats);
+		update_stats(&walltime_nsecs_stats, t1 - t0);
+
+		if (stat_config.aggr_mode == AGGR_GLOBAL)
+			perf_evlist__save_aggr_prev_raw_counts(evsel_list);
+
+		perf_evlist__copy_prev_raw_counts(evsel_list);
+		perf_evlist__reset_prev_raw_counts(evsel_list);
+		runtime_stat_reset(&stat_config);
+		perf_stat__reset_shadow_per_stat(&rt_stat);
+	} else
+		update_stats(&walltime_nsecs_stats, t1 - t0);
 
 	/*
 	 * Closing a group leader splits the group, and as we only disable
@@ -2159,7 +2182,7 @@ int cmd_stat(int argc, const char **argv)
 		}
 	}
 
-	if (!forever && status != -1 && !interval)
+	if (!forever && status != -1 && (!interval || stat_config.summary))
 		print_counters(NULL, argc, argv);
 
 	if (STAT_RECORD) {
tools/perf/util/stat.c +1 -1
index d23109c9bee9..cdb154381a87 100644
@@ -408,7 +408,7 @@ int perf_stat_process_counter(struct perf_stat_config *config,
 	 * interval mode, otherwise overall avg running
 	 * averages will be shown for each interval.
 	 */
-	if (config->interval) {
+	if (config->interval || config->summary) {
 		for (i = 0; i < 3; i++)
 			init_stats(&ps->res_stats[i]);
 	}
tools/perf/util/stat.h +1 -0
index 18ead55756cc..a5604a20bdca 100644
@@ -110,6 +110,7 @@ struct perf_stat_config {
 	bool			 all_kernel;
 	bool			 all_user;
 	bool			 percore_show_thread;
+	bool			 summary;
 	FILE			*output;
 	unsigned int		 interval;
 	unsigned int		 timeout;
Signature · 1 line
2.17.1
Reviewed-by on the v6 series
#6 lore raw
In reply to Jin Yao
Quoted 53 lines · Jin Yao

Currently perf-stat supports to print counts at regular interval (-I), but it's not very easy for user to get the overall statistics.

With this patchset, it supports to report the summary at the end of interval output.

For example,

 root@kbl-ppc:~# perf stat -e cycles -I1000 --interval-count 2
 #           time             counts unit events
      1.000412064          2,281,114      cycles
      2.001383658          2,547,880      cycles

Performance counter stats for 'system wide':

          4,828,994      cycles

        2.002860349 seconds time elapsed
 root@kbl-ppc:~# perf stat -e cycles,instructions -I1000 --interval-count 2
 #           time             counts unit events
      1.000389902          1,536,093      cycles
      1.000389902            420,226      instructions              #    0.27  insn per cycle
      2.001433453          2,213,952      cycles
      2.001433453            735,465      instructions              #    0.33  insn per cycle

Performance counter stats for 'system wide':

          3,750,045      cycles
          1,155,691      instructions              #    0.31  insn per cycle

        2.003023361 seconds time elapsed
 root@kbl-ppc:~# perf stat -M CPI,IPC -I1000 --interval-count 2
 #           time             counts unit events
      1.000435121            905,303      inst_retired.any          #      2.9 CPI
      1.000435121          2,663,333      cycles
      1.000435121            914,702      inst_retired.any          #      0.3 IPC
      1.000435121          2,676,559      cpu_clk_unhalted.thread
      2.001615941          1,951,092      inst_retired.any          #      1.8 CPI
      2.001615941          3,551,357      cycles
      2.001615941          1,950,837      inst_retired.any          #      0.5 IPC
      2.001615941          3,551,044      cpu_clk_unhalted.thread

Performance counter stats for 'system wide':

          2,856,395      inst_retired.any          #      2.2 CPI
          6,214,690      cycles
          2,865,539      inst_retired.any          #      0.5 IPC
          6,227,603      cpu_clk_unhalted.thread
        2.003403078 seconds time elapsed
Quoted 8 lines

v6:
---
1. Add comments in perf_evlist__save_aggr_prev_raw_counts.
2. Move init_stats(&walltime_nsecs_stats) under interval condition check.

Following patches are changed in v6.
perf stat: Save aggr value to first member of prev_raw_counts perf stat: Report summary for interval mode

thanks,
jirka

maintainer Applied
#7 lore raw

Em Wed, May 20, 2020 at 12:54:06PM +0200, Jiri Olsa escreveu:

Quoted 11 lines · Jin Yao
Quoted 8 lines

v6:
---
1. Add comments in perf_evlist__save_aggr_prev_raw_counts.
2. Move init_stats(&walltime_nsecs_stats) under interval condition check.

Following patches are changed in v6.
perf stat: Save aggr value to first member of prev_raw_counts perf stat: Report summary for interval mode

Thanks, applied,

- Arnaldo