Skip to contentSkip to conversation

ARM: dts: rockchip: fix phy nodename for rk3228-evb

PATCH New Sasha Levin 1 participant 13 messages May 22, 2020

Subsystems (9)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/13 ARM: dts: rockchip: fix phy nodename for rk3228-evb

From: Johan Jonker <[email protected]>

[ Upstream commit 287e0d538fcec2f6e8eb1e565bf0749f3b90186d ]

A test with the command below gives for example this error:

arch/arm/boot/dts/rk3228-evb.dt.yaml: phy@0:
'#phy-cells' is a required property

The phy nodename is normally used by a phy-handle. This node is however compatible with "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22" which is just been added to 'ethernet-phy.yaml'. So change nodename to 'ethernet-phy' for which '#phy-cells' is not a required property

make ARCH=arm dtbs_check DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/ phy/phy-provider.yaml

---
 arch/arm/boot/dts/rk3228-evb.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/rk3228-evb.dts +1 -1
index 1be9daacc4f9..b69c842d8306 100644
@@ -84,7 +84,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		phy: phy@0 {
+		phy: ethernet-phy@0 {
 			compatible = "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
 			clocks = <&cru SCLK_MAC_PHY>;
Signature · 1 line
2.25.1
author maintainer
#1 lore raw

PATCH 2/13 arm64: dts: rockchip: swap interrupts interrupt-names rk3399 gpu node

From: Johan Jonker <[email protected]>

[ Upstream commit c604fd810bda667bdc20b2c041917baa7803e0fb ]

Dts files with Rockchip rk3399 'gpu' nodes were manually verified. In order to automate this process arm,mali-midgard.txt has been converted to yaml. In the new setup dtbs_check with arm,mali-midgard.yaml expects interrupts and interrupt-names values in the same order. Fix this for rk3399.

make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/gpu/ arm,mali-midgard.yaml

---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm64/boot/dts/rockchip/rk3399.dtsi +4 -4
index ff8df7fd44a7..b63d9653ff55 100644
@@ -1691,10 +1691,10 @@
 	gpu: gpu@ff9a0000 {
 		compatible = "rockchip,rk3399-mali", "arm,mali-t860";
 		reg = <0x0 0xff9a0000 0x0 0x10000>;
-		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>;
-		interrupt-names = "gpu", "job", "mmu";
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "job", "mmu", "gpu";
 		clocks = <&cru ACLK_GPU>;
 		power-domains = <&power RK3399_PD_GPU>;
 		status = "disabled";
Signature · 1 line
2.25.1
author maintainer
#2 lore raw

PATCH 3/13 ARM: dts: rockchip: fix pinctrl sub nodename for spi in rk322x.dtsi

In reply to Sasha Levin

From: Johan Jonker <[email protected]>

[ Upstream commit 855bdca1781c79eb661f89c8944c4a719ce720e8 ]

A test with the command below gives these errors:

arch/arm/boot/dts/rk3229-evb.dt.yaml: spi-0:
'#address-cells' is a required property
arch/arm/boot/dts/rk3229-evb.dt.yaml: spi-1:
'#address-cells' is a required property
arch/arm/boot/dts/rk3229-xms6.dt.yaml: spi-0:
'#address-cells' is a required property
arch/arm/boot/dts/rk3229-xms6.dt.yaml: spi-1:
'#address-cells' is a required property

The $nodename pattern for spi nodes is "^spi(@.*|-[0-9a-f])*$". To prevent warnings rename 'spi-0' and 'spi-1' pinctrl sub nodenames to 'spi0' and 'spi1' in 'rk322x.dtsi'.

make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/spi/spi-controller.yaml

---
 arch/arm/boot/dts/rk322x.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/rk322x.dtsi +2 -2
index f59f7cc62be6..0c60dbc4b46a 100644
@@ -950,7 +950,7 @@
 			};
 		};
 
-		spi-0 {
+		spi0 {
 			spi0_clk: spi0-clk {
 				rockchip,pins = <0 9 RK_FUNC_2 &pcfg_pull_up>;
 			};
@@ -968,7 +968,7 @@
 			};
 		};
 
-		spi-1 {
+		spi1 {
 			spi1_clk: spi1-clk {
 				rockchip,pins = <0 23 RK_FUNC_2 &pcfg_pull_up>;
 			};
Signature · 1 line
2.25.1
author maintainer
#3 lore raw

PATCH 4/13 gpio: tegra: mask GPIO IRQs during IRQ shutdown

In reply to Sasha Levin

From: Stephen Warren <[email protected]>

[ Upstream commit 0cf253eed5d2bdf7bb3152457b38f39b012955f7 ]

The driver currently leaves GPIO IRQs unmasked even when the GPIO IRQ client has released the GPIO IRQ. This allows the HW to raise IRQs, and SW to process them, after shutdown. Fix this by masking the IRQ when it's shut down. This is usually taken care of by the irqchip core, but since this driver has a custom irq_shutdown implementation, it must do this explicitly itself.

---
 drivers/gpio/gpio-tegra.c | 1 +
 1 file changed, 1 insertion(+)
drivers/gpio/gpio-tegra.c +1 -0
index 1eb857e2f62f..dd801f5d5253 100644
@@ -356,6 +356,7 @@ static void tegra_gpio_irq_shutdown(struct irq_data *d)
 	struct tegra_gpio_info *tgi = bank->tgi;
 	unsigned int gpio = d->hwirq;
 
+	tegra_gpio_irq_mask(d);
 	gpiochip_unlock_as_irq(&tgi->gc, gpio);
 }
 
Signature · 1 line
2.25.1
author maintainer
#5 lore raw

PATCH 6/13 gfs2: move privileged user check to gfs2_quota_lock_check

In reply to Sasha Levin

From: Bob Peterson <[email protected]>

[ Upstream commit 4ed0c30811cb4d30ef89850b787a53a84d5d2bcb ]

Before this patch, function gfs2_quota_lock checked if it was called from a privileged user, and if so, it bypassed the quota check:
superuser can operate outside the quotas.
That's the wrong place for the check because the lock/unlock functions are separate from the lock_check function, and you can do lock and unlock without actually checking the quotas.

This patch moves the check to gfs2_quota_lock_check.

---
 fs/gfs2/quota.c | 3 +--
 fs/gfs2/quota.h | 3 ++-
 2 files changed, 3 insertions(+), 3 deletions(-)
fs/gfs2/quota.c +1 -2
index e700fb162664..a833e2e07167 100644
@@ -1039,8 +1039,7 @@ int gfs2_quota_lock(struct gfs2_inode *ip, kuid_t uid, kgid_t gid)
 	u32 x;
 	int error = 0;
 
-	if (capable(CAP_SYS_RESOURCE) ||
-	    sdp->sd_args.ar_quota != GFS2_QUOTA_ON)
+	if (sdp->sd_args.ar_quota != GFS2_QUOTA_ON)
 		return 0;
 
 	error = gfs2_quota_hold(ip, uid, gid);
fs/gfs2/quota.h +2 -1
index 836f29480be6..e3a6e2404d11 100644
@@ -47,7 +47,8 @@ static inline int gfs2_quota_lock_check(struct gfs2_inode *ip,
 	int ret;
 
 	ap->allowed = UINT_MAX; /* Assume we are permitted a whole lot */
-	if (sdp->sd_args.ar_quota == GFS2_QUOTA_OFF)
+	if (capable(CAP_SYS_RESOURCE) ||
+	    sdp->sd_args.ar_quota == GFS2_QUOTA_OFF)
 		return 0;
 	ret = gfs2_quota_lock(ip, NO_UID_QUOTA_CHANGE, NO_GID_QUOTA_CHANGE);
 	if (ret)
Signature · 1 line
2.25.1
author maintainer
#6 lore raw

PATCH 7/13 gfs2: don't call quota_unhold if quotas are not locked

In reply to Sasha Levin

From: Bob Peterson <[email protected]>

[ Upstream commit c9cb9e381985bbbe8acd2695bbe6bd24bf06b81c ]

Before this patch, function gfs2_quota_unlock checked if quotas are turned off, and if so, it branched to label out, which called gfs2_quota_unhold. With the new system of gfs2_qa_get and put, we no longer want to call gfs2_quota_unhold or we won't balance our gets and puts.

---
 fs/gfs2/quota.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
fs/gfs2/quota.c +1 -2
index a833e2e07167..d34a668a432f 100644
@@ -1112,7 +1112,7 @@ void gfs2_quota_unlock(struct gfs2_inode *ip)
 	int found;
 
 	if (!test_and_clear_bit(GIF_QD_LOCKED, &ip->i_flags))
-		goto out;
+		return;
 
 	for (x = 0; x < ip->i_qadata->qa_qd_num; x++) {
 		struct gfs2_quota_data *qd;
@@ -1149,7 +1149,6 @@ void gfs2_quota_unlock(struct gfs2_inode *ip)
 			qd_unlock(qda[x]);
 	}
 
-out:
 	gfs2_quota_unhold(ip);
 }
 
Signature · 1 line
2.25.1
author maintainer
#7 lore raw

PATCH 8/13 Revert "gfs2: Don't demote a glock until its revokes are written"

In reply to Sasha Levin

From: Bob Peterson <[email protected]>

[ Upstream commit b14c94908b1b884276a6608dea3d0b1b510338b7 ]

This reverts commit df5db5f9ee112e76b5202fbc331f990a0fc316d6.

This patch fixes a regression: patch df5db5f9ee112 allowed function run_queue() to bypass its call to do_xmote() if revokes were queued for the glock. That's wrong because its call to do_xmote() is what is responsible for calling the go_sync() glops functions to sync both the ail list and any revokes queued for it. By bypassing the call, gfs2 could get into a stand-off where the glock could not be demoted until its revokes are written back, but the revokes would not be written back because do_xmote() was never called.

It "sort of" works, however, because there are other mechanisms like the log flush daemon (logd) that can sync the ail items and revokes, if it deems it necessary. The problem is: without file system pressure, it might never deem it necessary.

---
 fs/gfs2/glock.c | 3 ---
 1 file changed, 3 deletions(-)
fs/gfs2/glock.c +0 -3
index 1e2ff4b32c79..aea1ed0aebd0 100644
@@ -636,9 +636,6 @@ __acquires(&gl->gl_lockref.lock)
 			goto out_unlock;
 		if (nonblock)
 			goto out_sched;
-		smp_mb();
-		if (atomic_read(&gl->gl_revokes) != 0)
-			goto out_sched;
 		set_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags);
 		GLOCK_BUG_ON(gl, gl->gl_demote_state == LM_ST_EXCLUSIVE);
 		gl->gl_target = gl->gl_demote_state;
Signature · 1 line
2.25.1
author maintainer
#9 lore raw

PATCH 10/13 usb: gadget: legacy: fix redundant initialization warnings

In reply to Sasha Levin

From: Masahiro Yamada <[email protected]>

[ Upstream commit d13cce757954fa663c69845611957396843ed87a ]

Fix the following cppcheck warnings:

drivers/usb/gadget/legacy/inode.c:1364:8: style: Redundant initialization for 'value'. The initialized value is overwritten$

 value = -EOPNOTSUPP;
       ^
drivers/usb/gadget/legacy/inode.c:1331:15: note: value is initialized
 int    value = -EOPNOTSUPP;
              ^
drivers/usb/gadget/legacy/inode.c:1364:8: note: value is overwritten
 value = -EOPNOTSUPP;
       ^
drivers/usb/gadget/legacy/inode.c:1817:8: style: Redundant initialization for 'value'. The initialized value is overwritten$
 value = -EINVAL;
       ^
drivers/usb/gadget/legacy/inode.c:1787:18: note: value is initialized
 ssize_t   value = len, length = len;
                 ^
drivers/usb/gadget/legacy/inode.c:1817:8: note: value is overwritten
 value = -EINVAL;
       ^
---
 drivers/usb/gadget/legacy/inode.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/usb/gadget/legacy/inode.c +1 -2
index 5c28bee327e1..e431a8bc3a9d 100644
@@ -1364,7 +1364,6 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 
 	req->buf = dev->rbuf;
 	req->context = NULL;
-	value = -EOPNOTSUPP;
 	switch (ctrl->bRequest) {
 
 	case USB_REQ_GET_DESCRIPTOR:
@@ -1788,7 +1787,7 @@ static ssize_t
 dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 {
 	struct dev_data		*dev = fd->private_data;
-	ssize_t			value = len, length = len;
+	ssize_t			value, length = len;
 	unsigned		total;
 	u32			tag;
 	char			*kbuf;
Signature · 1 line
2.25.1
author maintainer
#11 lore raw

PATCH 12/13 cifs: Fix null pointer check in cifs_read

In reply to Sasha Levin

From: Steve French <[email protected]>

[ Upstream commit 9bd21d4b1a767c3abebec203342f3820dcb84662 ]

Coverity scan noted a redundant null check

Coverity-id: 728517

---
 fs/cifs/file.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/cifs/file.c +1 -1
index 662977b8d6ae..72e7cbfb325a 100644
@@ -3496,7 +3496,7 @@ cifs_read(struct file *file, char *read_data, size_t read_size, loff_t *offset)
 			 * than it negotiated since it will refuse the read
 			 * then.
 			 */
-			if ((tcon->ses) && !(tcon->ses->capabilities &
+			if (!(tcon->ses->capabilities &
 				tcon->ses->server->vals->cap_large_files)) {
 				current_read_size = min_t(uint,
 					current_read_size, CIFSMaxBufSize);
Signature · 1 line
2.25.1
author maintainer
#12 lore raw

PATCH 13/13 samples: bpf: Fix build error

In reply to Sasha Levin

From: Matteo Croce <[email protected]>

[ Upstream commit 23ad04669f81f958e9a4121b0266228d2eb3c357 ]

GCC 10 is very strict about symbol clash, and lwt_len_hist_user contains a symbol which clashes with libbpf:

/usr/bin/ld: samples/bpf/lwt_len_hist_user.o:(.bss+0x0): multiple definition of `bpf_log_buf'; samples/bpf/bpf_load.o:(.bss+0x8c0): first defined here
collect2: error: ld returned 1 exit status

bpf_log_buf here seems to be a leftover, so removing it.

---
 samples/bpf/lwt_len_hist_user.c | 2 --
 1 file changed, 2 deletions(-)
samples/bpf/lwt_len_hist_user.c +0 -2
index 7fcb94c09112..965108527a4f 100644
@@ -15,8 +15,6 @@
 #define MAX_INDEX 64
 #define MAX_STARS 38
 
-char bpf_log_buf[BPF_LOG_BUF_SIZE];
-
 static void stars(char *str, long val, long max, int width)
 {
 	int i;
Signature · 1 line
2.25.1
author maintainer
#4 lore raw

PATCH 5/13 net: microchip: encx24j600: add missed kthread_stop

In reply to Sasha Levin

From: Chuhong Yuan <[email protected]>

[ Upstream commit ff8ce319e9c25e920d994cc35236f0bb32dfc8f3 ]

This driver calls kthread_run() in probe, but forgets to call kthread_stop() in probe failure and remove.
Add the missed kthread_stop() to fix it.

---
 drivers/net/ethernet/microchip/encx24j600.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/net/ethernet/microchip/encx24j600.c +4 -1
index f831238d9793..84b6ad76f5bc 100644
@@ -1075,7 +1075,7 @@ static int encx24j600_spi_probe(struct spi_device *spi)
 	if (unlikely(ret)) {
 		netif_err(priv, probe, ndev, "Error %d initializing card encx24j600 card\n",
 			  ret);
-		goto out_free;
+		goto out_stop;
 	}
 
 	eidled = encx24j600_read_reg(priv, EIDLED);
@@ -1093,6 +1093,8 @@ static int encx24j600_spi_probe(struct spi_device *spi)
 
 out_unregister:
 	unregister_netdev(priv->ndev);
+out_stop:
+	kthread_stop(priv->kworker_task);
 out_free:
 	free_netdev(ndev);
 
@@ -1105,6 +1107,7 @@ static int encx24j600_spi_remove(struct spi_device *spi)
 	struct encx24j600_priv *priv = dev_get_drvdata(&spi->dev);
 
 	unregister_netdev(priv->ndev);
+	kthread_stop(priv->kworker_task);
 
 	free_netdev(priv->ndev);
 
Signature · 1 line
2.25.1
author maintainer
#8 lore raw

PATCH 9/13 cachefiles: Fix race between read_waiter and read_copier involving op->to_do

In reply to Sasha Levin

From: Lei Xue <[email protected]>

[ Upstream commit 7bb0c5338436dae953622470d52689265867f032 ]

There is a potential race in fscache operation enqueuing for reading and copying multiple pages from cachefiles to netfs. The problem can be seen easily on a heavy loaded system (for example many processes reading files continually on an NFS share covered by fscache triggered this problem within a few minutes).

The race is due to cachefiles_read_waiter() adding the op to the monitor to_do list and then then drop the object->work_lock spinlock before completing fscache_enqueue_operation(). Once the lock is dropped, cachefiles_read_copier() grabs the op, completes processing it, and makes it through fscache_retrieval_complete() which sets the op->state to the final state of FSCACHE_OP_ST_COMPLETE(4). When cachefiles_read_waiter() finally gets through the remainder of fscache_enqueue_operation() it sees the invalid state, and hits the ASSERTCMP and the following oops is seen:

[ 2259.612361] FS-Cache:
[ 2259.614785] FS-Cache: Assertion failed
[ 2259.618639] FS-Cache: 4 == 5 is false
[ 2259.622456] ------------[ cut here ]------------
[ 2259.627190] kernel BUG at fs/fscache/operation.c:70!
...
[ 2259.791675] RIP: 0010:[<ffffffffc061b4cf>]  [<ffffffffc061b4cf>] fscache_enqueue_operation+0xff/0x170 [fscache]
[ 2259.802059] RSP: 0000:ffffa0263d543be0  EFLAGS: 00010046
[ 2259.807521] RAX: 0000000000000019 RBX: ffffa01a4d390480 RCX: 0000000000000006
[ 2259.814847] RDX: 0000000000000000 RSI: 0000000000000046 RDI: ffffa0263d553890
[ 2259.822176] RBP: ffffa0263d543be8 R08: 0000000000000000 R09: ffffa0263c2d8708
[ 2259.829502] R10: 0000000000001e7f R11: 0000000000000000 R12: ffffa01a4d390480
[ 2259.844483] R13: ffff9fa9546c5920 R14: ffffa0263d543c80 R15: ffffa0293ff9bf10
[ 2259.859554] FS:  00007f4b6efbd700(0000) GS:ffffa0263d540000(0000) knlGS:0000000000000000
[ 2259.875571] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2259.889117] CR2: 00007f49e1624ff0 CR3: 0000012b38b38000 CR4: 00000000007607e0
[ 2259.904015] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2259.918764] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2259.933449] PKRU: 55555554
[ 2259.943654] Call Trace:
[ 2259.953592]  <IRQ>
[ 2259.955577]  [<ffffffffc03a7c12>] cachefiles_read_waiter+0x92/0xf0 [cachefiles]
[ 2259.978039]  [<ffffffffa34d3942>] __wake_up_common+0x82/0x120
[ 2259.991392]  [<ffffffffa34d3a63>] __wake_up_common_lock+0x83/0xc0
[ 2260.004930]  [<ffffffffa34d3510>] ? task_rq_unlock+0x20/0x20
[ 2260.017863]  [<ffffffffa34d3ab3>] __wake_up+0x13/0x20
[ 2260.030230]  [<ffffffffa34c72a0>] __wake_up_bit+0x50/0x70
[ 2260.042535]  [<ffffffffa35bdcdb>] unlock_page+0x2b/0x30
[ 2260.054495]  [<ffffffffa35bdd09>] page_endio+0x29/0x90
[ 2260.066184]  [<ffffffffa368fc81>] mpage_end_io+0x51/0x80

CPU1
cachefiles_read_waiter()
20 static int cachefiles_read_waiter(wait_queue_entry_t *wait, unsigned mode,
21 int sync, void *_key)
22 {
...

 61         spin_lock(&object->work_lock);
 62         list_add_tail(&monitor->op_link, &op->to_do);
 63         spin_unlock(&object->work_lock);

<begin race window>
64
65 fscache_enqueue_retrieval(op);
182 static inline void fscache_enqueue_retrieval(struct fscache_retrieval *op) 183 {
184 fscache_enqueue_operation(&op->op);
185 }
58 void fscache_enqueue_operation(struct fscache_operation *op) 59 {
60 struct fscache_cookie *cookie = op->object->cookie;
61
62 _enter("{OBJ%x OP%x,%u}",
63 op->object->debug_id, op->debug_id, atomic_read(&op->usage));
64

 65         ASSERT(list_empty(&op->pend_link));
 66         ASSERT(op->processor != NULL);
 67         ASSERT(fscache_object_is_available(op->object));
 68         ASSERTCMP(atomic_read(&op->usage), >, 0);

<end race window>

CPU2
cachefiles_read_copier()
168 while (!list_empty(&op->to_do)) {
...

202                 fscache_end_io(op, monitor->netfs_page, error);
203                 put_page(monitor->netfs_page);
204                 fscache_retrieval_complete(op, 1);

CPU1
58 void fscache_enqueue_operation(struct fscache_operation *op) 59 {
...
69 ASSERTIFCMP(op->state != FSCACHE_OP_ST_IN_PROGRESS,
70 op->state, ==, FSCACHE_OP_ST_CANCELLED);

---
 fs/cachefiles/rdwr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/cachefiles/rdwr.c +1 -1
index 5e9176ec0d3a..c073a0f680fd 100644
@@ -64,9 +64,9 @@ static int cachefiles_read_waiter(wait_queue_entry_t *wait, unsigned mode,
 	object = container_of(op->op.object, struct cachefiles_object, fscache);
 	spin_lock(&object->work_lock);
 	list_add_tail(&monitor->op_link, &op->to_do);
+	fscache_enqueue_retrieval(op);
 	spin_unlock(&object->work_lock);
 
-	fscache_enqueue_retrieval(op);
 	fscache_put_retrieval(op);
 	return 0;
 }
Signature · 1 line
2.25.1
author maintainer
#10 lore raw

PATCH 11/13 net: freescale: select CONFIG_FIXED_PHY where needed

In reply to Sasha Levin

From: Arnd Bergmann <[email protected]>

[ Upstream commit 99352c79af3e5f2e4724abf37fa5a2a3299b1c81 ]

I ran into a randconfig build failure with CONFIG_FIXED_PHY=m and CONFIG_GIANFAR=y:

x86_64-linux-ld: drivers/net/ethernet/freescale/gianfar.o:(.rodata+0x418): undefined reference to `fixed_phy_change_carrier'

It seems the same thing can happen with dpaa and ucc_geth, so change all three to do an explicit 'select FIXED_PHY'.

The fixed-phy driver actually has an alternative stub function that theoretically allows building network drivers when fixed-phy is disabled, but I don't see how that would help here, as the drivers presumably would not work then.

---
 drivers/net/ethernet/freescale/Kconfig      | 2 ++
 drivers/net/ethernet/freescale/dpaa/Kconfig | 1 +
 2 files changed, 3 insertions(+)
drivers/net/ethernet/freescale/Kconfig +2 -0
index 6e490fd2345d..71f0640200bc 100644
@@ -76,6 +76,7 @@ config UCC_GETH
 	depends on QUICC_ENGINE
 	select FSL_PQ_MDIO
 	select PHYLIB
+	select FIXED_PHY
 	---help---
 	  This driver supports the Gigabit Ethernet mode of the QUICC Engine,
 	  which is available on some Freescale SOCs.
@@ -89,6 +90,7 @@ config GIANFAR
 	depends on HAS_DMA
 	select FSL_PQ_MDIO
 	select PHYLIB
+	select FIXED_PHY
 	select CRC32
 	---help---
 	  This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
drivers/net/ethernet/freescale/dpaa/Kconfig +1 -0
index a654736237a9..8fec41e57178 100644
@@ -2,6 +2,7 @@ menuconfig FSL_DPAA_ETH
 	tristate "DPAA Ethernet"
 	depends on FSL_DPAA && FSL_FMAN
 	select PHYLIB
+	select FIXED_PHY
 	select FSL_FMAN_MAC
 	---help---
 	  Data Path Acceleration Architecture Ethernet driver,
Signature · 1 line
2.25.1