staging: rtl8723bs: Use shared header constants
PATCH 1/1 staging: rtl8723bs: Use shared header constants
This is one of the 9 drivers redefining rfc1042_header.
--- drivers/staging/rtl8723bs/core/rtw_recv.c | 15 ++++++--------- drivers/staging/rtl8723bs/include/rtw_recv.h | 2 -- drivers/staging/rtl8723bs/os_dep/recv_linux.c | 5 +++-- 3 files changed, 9 insertions(+), 13 deletions(-)
drivers/staging/rtl8723bs/core/rtw_recv.c +6 -9
@@ -10,14 +10,11 @@#include <rtw_debug.h> #include <linux/jiffies.h> #include <rtw_recv.h> +#include <net/cfg80211.h> static u8 SNAP_ETH_TYPE_IPX [2 ] = {0x81 ,0x37 };static u8 SNAP_ETH_TYPE_APPLETALK_AARP [2 ] = {0x80 ,0xf3 }; -u8 rtw_rfc1042_header[] = {0xaa ,0xaa ,0x03 ,0x00 ,0x00 ,0x00 }; -/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */ -u8 rtw_bridge_tunnel_header[] = {0xaa ,0xaa ,0x03 ,0x00 ,0x00 ,0xf8 }; -static void rtw_signal_stat_timer_hdl (struct timer_list *t);void _rtw_init_sta_recv_priv (struct sta_recv_priv *psta_recvpriv)
@@ -1625,11 +1622,11 @@ sint wlanhdr_to_ethhdr(union recv_frame *precvframe) psnap_type = ptr+pattrib->hdrlen + pattrib->iv_len+SNAP_SIZE ;/* convert hdr + possible LLC headers into Ethernet header */ /* eth_type = (psnap_type[0] << 8) | psnap_type[1]; */ -if ((!memcmp (psnap, rtw_rfc1042_header,SNAP_SIZE ) && - (memcmp (psnap_type,SNAP_ETH_TYPE_IPX ,2 )) && - (memcmp (psnap_type,SNAP_ETH_TYPE_APPLETALK_AARP ,2 ))) || -/* eth_type != ETH_P_AARP && eth_type != ETH_P_IPX) || */ - !memcmp (psnap, rtw_bridge_tunnel_header,SNAP_SIZE )) { +if ((!memcmp (psnap, rfc1042_header,SNAP_SIZE ) && +memcmp (psnap_type,SNAP_ETH_TYPE_IPX ,2 ) && +memcmp (psnap_type,SNAP_ETH_TYPE_APPLETALK_AARP ,2 )) || +/* eth_type != ETH_P_AARP && eth_type != ETH_P_IPX) || */ + !memcmp (psnap, bridge_tunnel_header,SNAP_SIZE )) {/* remove RFC1042 or Bridge-Tunnel encapsulation and replace EtherType */ bsnaphdr = true; }else
drivers/staging/rtl8723bs/include/rtw_recv.h +0 -2
@@ -38,8 +38,6 @@#define RX_MAX_QUEUE 2#define MAX_SUBFRAME_COUNT 64 -extern u8 rtw_rfc1042_header[]; -extern u8 rtw_bridge_tunnel_header[];/* for Rx reordering buffer control */ struct recv_reorder_ctrl
drivers/staging/rtl8723bs/os_dep/recv_linux.c +3 -2
@@ -9,6 +9,7 @@#include <drv_types.h> #include <rtw_debug.h> #include <linux/jiffies.h> +#include <net/cfg80211.h> void rtw_os_free_recvframe (union recv_frame *precvframe) {
@@ -71,9 +72,9 @@ _pkt *rtw_os_alloc_msdu_pkt(union recv_frame *prframe, u16 nSubframe_Length, u8 eth_type =RTW_GET_BE16 (&sub_skb->data[6 ]);if (sub_skb->len >=8 && - ((!memcmp (sub_skb->data, rtw_rfc1042_header,SNAP_SIZE ) && + ((!memcmp (sub_skb->data, rfc1042_header,SNAP_SIZE ) && eth_type !=ETH_P_AARP && eth_type !=ETH_P_IPX ) || - !memcmp (sub_skb->data, rtw_bridge_tunnel_header,SNAP_SIZE ))) { + !memcmp (sub_skb->data, bridge_tunnel_header,SNAP_SIZE ))) {/* * remove RFC1042 or Bridge-Tunnel encapsulation and replace * EtherType
Signature · 1 line
2.27.0.rc0.183.gde8f92d652-goog
Greg Kroah-Hartman
maintainerQuoted 1 line · Pascal Terjan
This is one of the 9 drivers redefining
rfc1042_header.
I do not understand what this changelog is trying to say. Can you fix this up to be more explicit and detained and resend?
thanks,
greg k-h
Quoted 2 lines · Pascal Terjan
This is one of the 9 drivers redefining
rfc1042_header.
This is how the patch looks like in my email client:
https://marc.info/?l=linux-driver-devel&m=159026973821890&w=2
Do you see how the subject is far away from the body of the commit message? I normally only read the subject or the body when I'm reviewing patches so it's good if the body is clear on its own. Maybe write something like:
"This driver creates a local definitions of "rtw_rfc1042_header" and "rtw_bridge_tunnel_header" but it should just use the standard definitions from cfg80211.h."
Quoted 7 lines
void
_rtw_init_sta_recv_priv(struct sta_recv_priv *psta_recvpriv)drivers/staging/rtl8723bs/core/rtw_recv.c +0
-2@@ -1625,11 +1622,11 @@ sint wlanhdr_to_ethhdr(union recv_frame *precvframe) psnap_type = ptr+pattrib->hdrlen + pattrib->iv_len+SNAP_SIZE ;/* convert hdr + possible LLC headers into Ethernet header */ /* eth_type = (psnap_type[0] << 8) | psnap_type[1]; */ - if ((!memcmp(psnap, rtw_rfc1042_header, SNAP_SIZE) && - (memcmp(psnap_type, SNAP_ETH_TYPE_IPX, 2)) &&
drivers/staging/rtl8723bs/core/rtw_recv.c sint wlanhdr_to_ethhdr(union recv_frame *precvframe) · line 1631
Quoted 10 lines
drivers/staging/rtl8723bs/core/rtw_recv.c +5
-3- (memcmp(psnap_type, SNAP_ETH_TYPE_APPLETALK_AARP, 2))) || - /* eth_type != ETH_P_AARP && eth_type != ETH_P_IPX) || */ - !memcmp(psnap, rtw_bridge_tunnel_header, SNAP_SIZE)) { +if ((!memcmp (psnap, rfc1042_header,SNAP_SIZE ) && +memcmp (psnap_type,SNAP_ETH_TYPE_IPX ,2 ) && +memcmp (psnap_type,SNAP_ETH_TYPE_APPLETALK_AARP ,2 )) || +/* eth_type != ETH_P_AARP && eth_type != ETH_P_IPX) || */ + !memcmp (psnap, bridge_tunnel_header,SNAP_SIZE )) {/* remove RFC1042 or Bridge-Tunnel encapsulation and replace EtherType */ bsnaphdr = true;
Your indenting is correct, but I would probably do that in a separate patch. It makes it harder to review. Also probably delete the commented out code. Do you see how if we don't touch the indenting then it doesn't raise the question about if we should delete the comments as well?
regards,
dan carpenter
Quoted 9 lines · Dan Carpenter
Quoted 2 lines · Pascal Terjan
This is one of the 9 drivers redefining
rfc1042_header.This is how the patch looks like in my email client:
https://marc.info/?l=linux-driver-devel&m=159026973821890&w=2
Quoted 8 lines
Do you see how the subject is far away from the body of the commit message? I normally only read the subject or the body when I'm reviewing patches so it's good if the body is clear on its own. Maybe write something like:
"This driver creates a local definitions of "
rtw_rfc1042_header" and "rtw_bridge_tunnel_header" but it should just use the standard definitions fromcfg80211.h."
Thanks, I see both together when writing the commit message and need to remember they are actually separate.
Quoted 15 lines
Quoted 15 lines
void
_rtw_init_sta_recv_priv(struct sta_recv_priv *psta_recvpriv)drivers/staging/rtl8723bs/core/rtw_recv.c +5
-5@@ -1625,11 +1622,11 @@ sint wlanhdr_to_ethhdr(union recv_frame *precvframe) psnap_type = ptr+pattrib->hdrlen + pattrib->iv_len+SNAP_SIZE ;/* convert hdr + possible LLC headers into Ethernet header */ /* eth_type = (psnap_type[0] << 8) | psnap_type[1]; */ -if ((!memcmp (psnap, rtw_rfc1042_header,SNAP_SIZE ) && - (memcmp (psnap_type,SNAP_ETH_TYPE_IPX ,2 )) && - (memcmp (psnap_type,SNAP_ETH_TYPE_APPLETALK_AARP ,2 ))) || -/* eth_type != ETH_P_AARP && eth_type != ETH_P_IPX) || */ - !memcmp (psnap, rtw_bridge_tunnel_header,SNAP_SIZE )) { +if ((!memcmp (psnap, rfc1042_header,SNAP_SIZE ) && +memcmp (psnap_type,SNAP_ETH_TYPE_IPX ,2 ) && +memcmp (psnap_type,SNAP_ETH_TYPE_APPLETALK_AARP ,2 )) || +/* eth_type != ETH_P_AARP && eth_type != ETH_P_IPX) || */ + !memcmp (psnap, bridge_tunnel_header,SNAP_SIZE )) {
Quoted 8 lines
drivers/staging/rtl8723bs/core/rtw_recv.c sint wlanhdr_to_ethhdr(union recv_frame *precvframe) · line 1631
Quoted 2 lines
drivers/staging/rtl8723bs/core/rtw_recv.c +0
-0/* remove RFC1042 or Bridge-Tunnel encapsulation and replace EtherType */ bsnaphdr = true;Your indenting is correct, but I would probably do that in a separate patch. It makes it harder to review. Also probably delete the commented out code. Do you see how if we don't touch the indenting then it doesn't raise the question about if we should delete the comments as well?
I initially didn't want to change it but checkpatch was sad which makes me sad, maybe I should have cleaned up this area in a first trivial patch before touching that line.
PATCH v2 1/1 staging: rtl8723bs: Use common packet header constants
In reply to Dan CarpenterThis driver contains a local version of the rfc1042 header and bridge tunnel header constants which are available from cfg80211.h, switch to those.
---
v2: improve description and drop confusing cosmetic changes
drivers/staging/rtl8723bs/core/rtw_recv.c | 9 +++------ drivers/staging/rtl8723bs/include/rtw_recv.h | 2 -- drivers/staging/rtl8723bs/os_dep/recv_linux.c | 5 +++-- 3 files changed, 6 insertions(+), 10 deletions(-)
drivers/staging/rtl8723bs/core/rtw_recv.c +3 -6
@@ -10,14 +10,11 @@#include <rtw_debug.h> #include <linux/jiffies.h> #include <rtw_recv.h> +#include <net/cfg80211.h> static u8 SNAP_ETH_TYPE_IPX [2 ] = {0x81 ,0x37 };static u8 SNAP_ETH_TYPE_APPLETALK_AARP [2 ] = {0x80 ,0xf3 }; -u8 rtw_rfc1042_header[] = {0xaa ,0xaa ,0x03 ,0x00 ,0x00 ,0x00 }; -/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */ -u8 rtw_bridge_tunnel_header[] = {0xaa ,0xaa ,0x03 ,0x00 ,0x00 ,0xf8 }; -static void rtw_signal_stat_timer_hdl (struct timer_list *t);void _rtw_init_sta_recv_priv (struct sta_recv_priv *psta_recvpriv)
@@ -1625,11 +1622,11 @@ sint wlanhdr_to_ethhdr(union recv_frame *precvframe) psnap_type = ptr+pattrib->hdrlen + pattrib->iv_len+SNAP_SIZE ;/* convert hdr + possible LLC headers into Ethernet header */ /* eth_type = (psnap_type[0] << 8) | psnap_type[1]; */ -if ((!memcmp (psnap, rtw_rfc1042_header,SNAP_SIZE ) && +if ((!memcmp (psnap, rfc1042_header,SNAP_SIZE ) && (memcmp (psnap_type,SNAP_ETH_TYPE_IPX ,2 )) && (memcmp (psnap_type,SNAP_ETH_TYPE_APPLETALK_AARP ,2 ))) ||/* eth_type != ETH_P_AARP && eth_type != ETH_P_IPX) || */ - !memcmp (psnap, rtw_bridge_tunnel_header,SNAP_SIZE )) { + !memcmp (psnap, bridge_tunnel_header,SNAP_SIZE )) {/* remove RFC1042 or Bridge-Tunnel encapsulation and replace EtherType */ bsnaphdr = true; }else
drivers/staging/rtl8723bs/include/rtw_recv.h +0 -2
@@ -38,8 +38,6 @@#define RX_MAX_QUEUE 2#define MAX_SUBFRAME_COUNT 64 -extern u8 rtw_rfc1042_header[]; -extern u8 rtw_bridge_tunnel_header[];/* for Rx reordering buffer control */ struct recv_reorder_ctrl
drivers/staging/rtl8723bs/os_dep/recv_linux.c +3 -2
@@ -9,6 +9,7 @@#include <drv_types.h> #include <rtw_debug.h> #include <linux/jiffies.h> +#include <net/cfg80211.h> void rtw_os_free_recvframe (union recv_frame *precvframe) {
@@ -71,9 +72,9 @@ _pkt *rtw_os_alloc_msdu_pkt(union recv_frame *prframe, u16 nSubframe_Length, u8 eth_type =RTW_GET_BE16 (&sub_skb->data[6 ]);if (sub_skb->len >=8 && - ((!memcmp (sub_skb->data, rtw_rfc1042_header,SNAP_SIZE ) && + ((!memcmp (sub_skb->data, rfc1042_header,SNAP_SIZE ) && eth_type !=ETH_P_AARP && eth_type !=ETH_P_IPX ) || - !memcmp (sub_skb->data, rtw_bridge_tunnel_header,SNAP_SIZE ))) { + !memcmp (sub_skb->data, bridge_tunnel_header,SNAP_SIZE ))) {/* * remove RFC1042 or Bridge-Tunnel encapsulation and replace * EtherType
Signature · 1 line
2.27.0.rc0.183.gde8f92d652-goog
Quoted 21 lines · Pascal Terjan
Quoted 14 lines · Dan Carpenter
drivers/staging/rtl8723bs/core/rtw_recv.c sint wlanhdr_to_ethhdr(union recv_frame *precvframe) · line 1631
Quoted 13 lines
/* eth_type = (psnap_type[0] << 8) | psnap_type[1]; */drivers/staging/rtl8723bs/core/rtw_recv.c +5
-5-if ((!memcmp (psnap, rtw_rfc1042_header,SNAP_SIZE ) && - (memcmp (psnap_type,SNAP_ETH_TYPE_IPX ,2 )) && - (memcmp (psnap_type,SNAP_ETH_TYPE_APPLETALK_AARP ,2 ))) || -/* eth_type != ETH_P_AARP && eth_type != ETH_P_IPX) || */ - !memcmp (psnap, rtw_bridge_tunnel_header,SNAP_SIZE )) { +if ((!memcmp (psnap, rfc1042_header,SNAP_SIZE ) && +memcmp (psnap_type,SNAP_ETH_TYPE_IPX ,2 ) && +memcmp (psnap_type,SNAP_ETH_TYPE_APPLETALK_AARP ,2 )) || +/* eth_type != ETH_P_AARP && eth_type != ETH_P_IPX) || */ + !memcmp (psnap, bridge_tunnel_header,SNAP_SIZE )) {/* remove RFC1042 or Bridge-Tunnel encapsulation and replace EtherType */ bsnaphdr = true;Quoted 5 lines
Your indenting is correct, but I would probably do that in a separate patch. It makes it harder to review. Also probably delete the commented out code. Do you see how if we don't touch the indenting then it doesn't raise the question about if we should delete the comments as well?
Quoted 3 lines
I initially didn't want to change it but checkpatch was sad which makes me sad, maybe I should have cleaned up this area in a first trivial patch before touching that line.
Just ignore checkpatch in this case because it's not a warning that your patch introduced.
Say if you re-name a function, then you *must* re-indent the parameters because that's a warning the change introduces. If there is a checkpatch warning and it's on a line that you touch then you can change that. But once you start changing other nearby lines you might run into trouble.
The other thing that you fixed is you removed unnecessary parentheses and that's good but it actually broke my review script for renaming variables. (Attached). I do cat email.txt | rename_rev.pl -a It's easier in mutt.
regards,
dan carpenter
#!/usr/bin/perl
# This is a tool to help review variable rename patches. The goal is
# to strip out the automatic sed renames and the white space changes # and leaves the interesting code changes. # # Example 1: A patch renames openInfo to open_info: # cat diff | rename_review.pl openInfo open_info # # Example 2: A patch swaps the first two arguments to some_func(): # cat diff | rename_review.pl \ # -e 's/some_func\((.*?),(.*?),/some_func\($2, $1,/' # # Example 3: A patch removes the xkcd_ prefix from some but not all the # variables. Instead of trying to figure out which variables were renamed # just remove the prefix from them all: # cat diff | rename_review.pl -ea 's/xkcd_//g' # # Example 4: A patch renames 20 CamelCase variables. To review this let's # just ignore all case changes and all '_' chars. # cat diff | rename_review -ea 'tr/[A-Z]/[a-z]/' -ea 's/_//g' # # The other arguments are: # -nc removes comments # -ns removes '\' chars if they are at the end of the line.
use strict;
use File::Temp qw/ :mktemp /;
sub usage() {
print "usage: cat diff | $0 old new old new old new...\n";
print " or: cat diff | $0 -e 's/old/new/g'\n";
print " -a : auto";
print " -e : execute on old lines\n";
print " -ea: execute on all lines\n";
print " -nc: no comments\n";
print " -nb: no unneeded braces\n";
print " -ns: no slashes at the end of a line\n";
print " -pull: for function pull. deletes context.\n";
print " -r <recipe>: NULL, bool";
exit(1);
}my @subs;
my @strict_subs;
my @cmds;
my $strip_comments;
my $strip_braces;
my $strip_slashes;
my $pull_context;
my $auto;
sub filter($) {
my $line = shift();
my $old = 0;
if ($line =~ /^-/) {
$old = 1;
}
# remove the first char
$line =~ s/^[ +-]//;
if ($strip_comments) {
$line =~ s/\/\*.*?\*\///g;
$line =~ s/\/\/.*//;
}
foreach my $cmd (@cmds) {
if ($old || $cmd->[0] =~ /^-ea$/) {
eval "\$line =~ $cmd->[1]";
}
}
foreach my $sub (@subs) {
if ($old) {
$line =~ s/$sub->[0]/$sub->[1]/g;
}
}
foreach my $sub (@strict_subs) {
if ($old) {
$line =~ s/\b$sub->[0]\b/$sub->[1]/g;
}
}
# remove the newline so we can move curly braces here if we want.
$line =~ s/\n//;
return $line;
}while (my $param1 = shift()) {
if ($param1 =~ /^-a$/) {
$auto = 1;
next;
}
if ($param1 =~ /^-nc$/) {
$strip_comments = 1;
next;
}
if ($param1 =~ /^-nb$/) {
$strip_braces = 1;
next;
}
if ($param1 =~ /^-ns$/) {
$strip_slashes = 1;
next;
}
if ($param1 =~ /^-pull$/) {
$pull_context = 1;
next;
}
my $param2 = shift();
if ($param2 =~ /^$/) {
usage();
}
if ($param1 =~ /^-e(a|)$/) {
push @cmds, [$param1, $param2];
next;
}
if ($param1 =~ /^-r$/) {
if ($param2 =~ /bool/) {
push @cmds, ["-e", "s/== true//"];
push @cmds, ["-e", "s/true ==//"];
push @cmds, ["-e", "s/([a-zA-Z\-\>\._]+) == false/!\$1/"];
next;
} elsif ($param2 =~ /NULL/) {
push @cmds, ["-e", "s/ != NULL//"];
push @cmds, ["-e", "s/([a-zA-Z\-\>\._0-9]+) == NULL/!\$1/"];
next;
} elsif ($param2 =~ /^BIT$/) {
push @cmds, ["-e", 's/1[uU]* *<< *(\d+)/BIT($1)/'];
push @cmds, ["-e", 's/\(1 *<< *(\w+)\)/BIT($1)/'];
push @cmds, ["-e", 's/\(BIT\((.*?)\)\)/BIT($1)/'];
next;
} elsif ($param2 =~ /^HBIT$/) {
push @cmds, ["-e", 's/0x0*1\b/BIT(0)/'];
push @cmds, ["-e", 's/0x0*2\b/BIT(1)/'];
push @cmds, ["-e", 's/0x0*4\b/BIT(2)/'];
push @cmds, ["-e", 's/0x0*8\b/BIT(3)/'];
push @cmds, ["-e", 's/0x0*10\b/BIT(4)/'];
push @cmds, ["-e", 's/0x0*20\b/BIT(5)/'];
push @cmds, ["-e", 's/0x0*40\b/BIT(6)/'];
push @cmds, ["-e", 's/0x0*80\b/BIT(7)/'];
next;
}
usage();
}
push @subs, [$param1, $param2];
}my ($oldfh, $oldfile) = mkstemp("/tmp/oldXXXXX");
my ($newfh, $newfile) = mkstemp("/tmp/newXXXXX");
my @input = <STDIN>;
# auto works on the observation that the - line comes before the + line when we
# rename variables. Take the first - line. Find the first + line. Find the
# one word difference. Test that the old word never occurs in the new text.
if ($auto) {
my %c_keywords = ( auto => 1,
break => 1,
case => 1,
char => 1,
const => 1,
continue => 1,
default => 1,
do => 1,
double => 1,
else => 1,
enum => 1,
extern => 1,
float => 1,
for => 1,
goto => 1,
if => 1,
int => 1,
long => 1,
register => 1,
return => 1,
short => 1,
signed => 1,
sizeof => 1,
static => 1,
struct => 1,
switch => 1,
typedef => 1,
union => 1,
unsigned => 1,
void => 1,
volatile => 1,
while => 1);
my %old_words;
my %new_words;
my %added_cmds;
my @new_subs; my $inside = 0;
foreach my $line (@input) {
if ($line =~ /^(---|\+\+\+)/) {
next;
}
if ($line =~ /^@/) {
$inside = 1;
}
if ($inside && !(($_ =~ /^[- @+]/) || ($_ =~ /^$/))) {
$inside = 0;
}
if (!$inside) {
next;
}
if ($line =~ /^-/) {
s/-//;
my @words = split(/\W+/, $line);
foreach my $word (@words) {
$old_words{$word} = 1;
}
} elsif ($line =~ /^\+/) {
s/\+//;
my @words = split(/\W+/, $line);
foreach my $word (@words) {
$new_words{$word} = 1;
}
}
}
my $old_line;
my $new_line;
$inside = 0;
foreach my $line (@input) {
if ($line =~ /^(---|\+\+\+)/) {
next;
}
if ($line =~ /^@/) {
$inside = 1;
}
if ($inside && !(($_ =~ /^[- @+]/) || ($_ =~ /^$/))) {
$inside = 0;
}
if (!$inside) {
next;
}
if ($line =~ /^-/ && !$old_line) {
s/^-//;
$old_line = $line;
next;
} elsif ($old_line && $line =~ /^\+/) {
s/^\+//;
$new_line = $line;
} else {
next;
}
my @old_words = split(/\W+/, $old_line);
my @new_words = split(/\W+/, $new_line);
my @new_cmds;
my $i;
my $diff_count = 0;
for ($i = 0; ; $i++) {
if (!defined($old_words[$i]) && !defined($new_words[$i])) {
last;
}
if (!defined($old_words[$i]) || !defined($new_words[$i])) {
$diff_count = 1000;
last;
}
if ($old_words[$i] eq $new_words[$i]) {
next;
}
if ($c_keywords{$old_words[$i]}) {
$diff_count = 1000;
last;
}
if ($new_words{$old_words[$i]}) {
$diff_count++;
}
push @new_cmds, [$old_words[$i], $new_words[$i]];
}
if ($diff_count <= 2) {
foreach my $sub (@new_cmds) {
if ($added_cmds{$sub->[0] . $sub->[1]}) {
next;
}
$added_cmds{$sub->[0] . $sub->[1]} = 1;
push @new_subs, [$sub->[0] , $sub->[1]];
}
}
$old_line = 0;
}
if (@new_subs) {
print "RENAMES:\n";
foreach my $sub (@new_subs) {
print "$sub->[0] => $sub->[1]\n";
push @strict_subs, [$sub->[0] , $sub->[1]];
}
print "---\n";
}
}my $output;
#recreate an old file and a new file
my $inside = 0;
foreach (@input) {
if ($pull_context && !($_ =~ /^[+-@]/)) {
next;
}
if ($_ =~ /^(---|\+\+\+)/) {
next;
}
if ($_ =~ /^@/) {
$inside = 1;
}
if ($inside && !(($_ =~ /^[- @+]/) || ($_ =~ /^$/))) {
$inside = 0;
}
if (!$inside) {
next;
}
$output = filter($_);
if ($strip_braces && $_ =~ /^(\+|-)\W+{/) {
$output =~ s/^[\t ]+(.*)/ $1/;
} else {
$output = "\n" . $output;
}
if ($_ =~ /^-/) {
print $oldfh $output;
next;
}
if ($_ =~ /^\+/) {
print $newfh $output;
next;
}
print $oldfh $output;
print $newfh $output;}
print $oldfh "\n";
print $newfh "\n";
# git diff puts a -- and version at the end of the diff. put the -- into the
# new file as well so it's ignored
if ($output =~ /\n-/) {
print $newfh "-\n";
}my $hunk;
my $old_txt;
my $new_txt;
open diff, "diff -uw $oldfile $newfile |";
while (<diff>) {
if ($_ =~ /^(---|\+\+\+)/) {
next;
}
if ($_ =~ /^@/) {
if ($strip_comments) {
$old_txt =~ s/\/\*.*?\*\///g;
$new_txt =~ s/\/\*.*?\*\///g;
}
if ($strip_braces) {
$old_txt =~ s/{([^;{]*?);}/$1;/g;
$new_txt =~ s/{([^;{]*?);}/$1;/g;
# this is a hack because i don't know how to replace nested
# unneeded curly braces.
$old_txt =~ s/{([^;{]*?);}/$1;/g;
$new_txt =~ s/{([^;{]*?);}/$1;/g;
}
if ($old_txt ne $new_txt) {
print $hunk;
print $_;
}
$hunk = "";
$old_txt = "";
$new_txt = "";
next;
}
$hunk = $hunk . $_;
if ($strip_slashes) {
s/\\$//;
}
if ($_ =~ /^-/) {
s/-//;
s/[ \t\n]//g;
$old_txt = $old_txt . $_;
next;
}
if ($_ =~ /^\+/) {
s/\+//;
s/[ \t\n]//g;
$new_txt = $new_txt . $_;
next;
}
if ($_ =~ /^ /) {
s/^ //;
s/[ \t\n]//g;
$old_txt = $old_txt . $_;
$new_txt = $new_txt . $_;
}
}if ($old_txt ne $new_txt) {
if ($strip_comments) {
$old_txt =~ s/\/\*.*?\*\///g;
$new_txt =~ s/\/\*.*?\*\///g;
}
if ($strip_braces) {
$old_txt =~ s/{([^;{]*?);}/$1;/g;
$new_txt =~ s/{([^;{]*?);}/$1;/g;
$old_txt =~ s/{([^;{]*?);}/$1;/g;
$new_txt =~ s/{([^;{]*?);}/$1;/g;
}
print $hunk;
}unlink($oldfile);
unlink($newfile);
print "\ndone.\n";
Re: [PATCH v2] staging: rtl8723bs: Use common packet header constants
In reply to Pascal TerjanQuoted 7 lines · Pascal Terjan
This driver contains a local version of the rfc1042 header and bridge tunnel header constants which are available from
cfg80211.h, switch to those.Signed-off-by Pascal Terjan <[email protected]>---
v2: improve description and drop confusing cosmetic changes
Perfect! Thanks.
regards,
dan carpenter