Skip to contentSkip to conversation

drm/i915/display/hsw+: Do not program the same vswing entry twice

PATCH In review José Roberto de Souza 3 participants 12 messages May 28, 2020 – Jun 3, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/4 drm/i915/display/hsw+: Do not program the same vswing entry twice

It will be programed right before the link training, so no need to do it twice.
It will not strictly follow BSpec sequences but most of this sequences are not matching anyways.

---
 drivers/gpu/drm/i915/display/intel_ddi.c | 19 ++++---------------
 1 file changed, 4 insertions(+), 15 deletions(-)
drivers/gpu/drm/i915/display/intel_ddi.c +4 -15
index aa22465bb56e..c100efc6a2c4 100644
@@ -3115,7 +3115,6 @@ static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state,
 	enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
 	struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
 	bool is_mst = intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST);
-	int level = intel_ddi_dp_level(intel_dp);
 	enum transcoder transcoder = crtc_state->cpu_transcoder;
 
 	intel_dp_set_link_params(intel_dp, crtc_state->port_clock,
@@ -3190,9 +3189,10 @@ static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state,
 	 * down this function.
 	 */
 
-	/* 7.e Configure voltage swing and related IO settings */
-	tgl_ddi_vswing_sequence(encoder, crtc_state->port_clock, level,
-				encoder->type);
+	/*
+	 * 7.e Configure voltage swing and related IO settings
+	 * It will be done in intel_dp_start_link_train(), no need to do twice
+	 */
 
 	/*
 	 * 7.f Combo PHY: Configure PORT_CL_DW10 Static Power Down to power up
@@ -3257,7 +3257,6 @@ static void hsw_ddi_pre_enable_dp(struct intel_atomic_state *state,
 	enum phy phy = intel_port_to_phy(dev_priv, port);
 	struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
 	bool is_mst = intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST);
-	int level = intel_ddi_dp_level(intel_dp);
 
 	if (INTEL_GEN(dev_priv) < 11)
 		drm_WARN_ON(&dev_priv->drm,
@@ -3279,16 +3278,6 @@ static void hsw_ddi_pre_enable_dp(struct intel_atomic_state *state,
 
 	icl_program_mg_dp_mode(dig_port, crtc_state);
 
-	if (INTEL_GEN(dev_priv) >= 11)
-		icl_ddi_vswing_sequence(encoder, crtc_state->port_clock,
-					level, encoder->type);
-	else if (IS_CANNONLAKE(dev_priv))
-		cnl_ddi_vswing_sequence(encoder, level, encoder->type);
-	else if (IS_GEN9_LP(dev_priv))
-		bxt_ddi_vswing_sequence(encoder, level, encoder->type);
-	else
-		intel_prepare_dp_ddi_buffers(encoder, crtc_state);
-
 	if (intel_phy_is_combo(dev_priv, phy)) {
 		bool lane_reversal =
 			dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL;
Signature · 6 lines
2.26.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH 2/4 drm/i915/bios: Parse HOBL parameter

HOBL means hours of battery life, it is a power-saving feature were supported motherboards can use a special voltage swing table that uses less power.

So here parsing the VBT to check if this feature is supported. While at it already added the VRR parameter too.

BSpec: 20150

---
 drivers/gpu/drm/i915/display/intel_bios.c     | 3 +++
 drivers/gpu/drm/i915/display/intel_vbt_defs.h | 2 ++
 drivers/gpu/drm/i915/i915_drv.h               | 1 +
 3 files changed, 6 insertions(+)
drivers/gpu/drm/i915/display/intel_bios.c +3 -0
index 839124647202..b3c453aa7623 100644
@@ -722,6 +722,9 @@ parse_power_conservation_features(struct drm_i915_private *dev_priv,
 	 */
 	if (!(power->drrs & BIT(panel_type)))
 		dev_priv->vbt.drrs_type = DRRS_NOT_SUPPORTED;
+
+	if (bdb->version >= 232)
+		dev_priv->vbt.edp.hobl = power->hobl & BIT(panel_type);
 }
 
 static void
drivers/gpu/drm/i915/display/intel_vbt_defs.h +2 -0
index aef7fe932d1a..65f552f57e06 100644
@@ -820,6 +820,8 @@ struct bdb_lfp_power {
 	u16 adb;
 	u16 lace_enabled_status;
 	struct agressiveness_profile_entry aggressivenes[16];
+	u16 hobl; /* 232+ */
+	u16 vrr; /* 233+ */
 } __packed;
 
 /*
drivers/gpu/drm/i915/i915_drv.h +1 -0
index 98f2c448cd92..1e060de3edc4 100644
@@ -690,6 +690,7 @@ struct intel_vbt_data {
 		bool initialized;
 		int bpp;
 		struct edp_power_seq pps;
+		bool hobl;
 	} edp;
 
 	struct {
Signature · 6 lines
2.26.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw

PATCH 3/4 drm/i915/display: Implement HOBL

In reply to José Roberto de Souza

Hours Of Battery Life is a new GEN12+ power-saving feature that allows supported motherboards to use a special voltage swing table for eDP panels that uses less power.

So here if supported by HW, OEM will set it in VBT and i915 will try to train link with HOBL vswing table if link training fails it fall back to the original table.

Just not sure if DP compliance should also use this new voltage swing table too, cced some folks that worked in DP compliance.

BSpec: 49291
BSpec: 49399

---
 drivers/gpu/drm/i915/display/intel_ddi.c      | 48 +++++++++++++++++--
 .../drm/i915/display/intel_display_types.h    |  2 +
 .../drm/i915/display/intel_dp_link_training.c | 20 +++++++-
 drivers/gpu/drm/i915/i915_drv.h               |  2 +
 drivers/gpu/drm/i915/i915_reg.h               |  2 +
 5 files changed, 69 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/display/intel_ddi.c +45 -3
index c100efc6a2c4..a44e190de79f 100644
@@ -692,6 +692,10 @@ static const struct cnl_ddi_buf_trans tgl_combo_phy_ddi_translations_dp_hbr2[] =
 	{ 0x6, 0x7F, 0x3F, 0x00, 0x00 },	/* 900   900      0.0   */
 };
 
+static const struct cnl_ddi_buf_trans tgl_combo_phy_ddi_translations_edp_hbr2_hobl[] = {
+	{ 0x6, 0x7F, 0x3F, 0x00, 0x00 }
+};
+
 static const struct ddi_buf_trans *
 bdw_get_buf_trans_edp(struct drm_i915_private *dev_priv, int *n_entries)
 {
@@ -2297,14 +2301,51 @@ static void cnl_ddi_vswing_sequence(struct intel_encoder *encoder,
 	intel_de_write(dev_priv, CNL_PORT_TX_DW5_GRP(port), val);
 }
 
+/*
+ * If supported return HOBL vswing table and set registers to enable HOBL
+ * otherwise returns NULL and unset registers to enable HOBL.
+ */
+static const struct cnl_ddi_buf_trans *
+hobl_get_combo_buf_trans(struct drm_i915_private *dev_priv,
+			 struct intel_encoder *encoder, int type, int rate,
+			 u32 level, int *n_entries)
+{
+	const u32 hobl_en = EDP4K2K_MODE_OVRD_EN | EDP4K2K_MODE_OVRD_OPTIMIZED;
+	enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
+	struct intel_dp *intel_dp;
+
+	if (!HAS_HOBL(dev_priv) || type != INTEL_OUTPUT_EDP)
+		return NULL;
+
+	intel_dp = enc_to_intel_dp(encoder);
+	if (!intel_dp->try_hobl || rate > 540000) {
+		intel_de_rmw(dev_priv, ICL_PORT_CL_DW10(phy), hobl_en, 0);
+		return NULL;
+	}
+
+	drm_dbg_kms(&dev_priv->drm, "Enabling HOBL in PHY %c\n", phy_name(phy));
+	drm_WARN_ON_ONCE(&dev_priv->drm, level > 0);
+
+	intel_de_rmw(dev_priv, ICL_PORT_CL_DW10(phy), hobl_en, hobl_en);
+	/* Same table applies to TGL, RKL and DG1 */
+	*n_entries = ARRAY_SIZE(tgl_combo_phy_ddi_translations_edp_hbr2_hobl);
+	return tgl_combo_phy_ddi_translations_edp_hbr2_hobl;
+}
+
 static void icl_ddi_combo_vswing_program(struct drm_i915_private *dev_priv,
-					u32 level, enum phy phy, int type,
-					int rate)
+					 struct intel_encoder *encoder,
+					 u32 level, enum phy phy, int type,
+					 int rate)
 {
 	const struct cnl_ddi_buf_trans *ddi_translations = NULL;
 	u32 n_entries, val;
 	int ln;
 
+	ddi_translations = hobl_get_combo_buf_trans(dev_priv, encoder, type,
+						    rate, level, &n_entries);
+	if (ddi_translations)
+		goto hobl_found;
+
 	if (INTEL_GEN(dev_priv) >= 12)
 		ddi_translations = tgl_get_combo_buf_trans(dev_priv, type, rate,
 							   &n_entries);
@@ -2317,6 +2358,7 @@ static void icl_ddi_combo_vswing_program(struct drm_i915_private *dev_priv,
 	if (!ddi_translations)
 		return;
 
+hobl_found:
 	if (level >= n_entries) {
 		drm_dbg_kms(&dev_priv->drm,
 			    "DDI translation not found for level %d. Using %d instead.",
@@ -2424,7 +2466,7 @@ static void icl_combo_phy_ddi_vswing_sequence(struct intel_encoder *encoder,
 	intel_de_write(dev_priv, ICL_PORT_TX_DW5_GRP(phy), val);
 
 	/* 5. Program swing and de-emphasis */
-	icl_ddi_combo_vswing_program(dev_priv, level, phy, type, rate);
+	icl_ddi_combo_vswing_program(dev_priv, encoder, level, phy, type, rate);
 
 	/* 6. Set training enable to trigger update */
 	val = intel_de_read(dev_priv, ICL_PORT_TX_DW5_LN0(phy));
drivers/gpu/drm/i915/display/intel_display_types.h +2 -0
index 30b2767578dc..9e7dbff7dd43 100644
@@ -1365,6 +1365,8 @@ struct intel_dp {
 
 	/* Display stream compression testing */
 	bool force_dsc_en;
+
+	bool try_hobl;
 };
 
 enum lspcon_vendor {
drivers/gpu/drm/i915/display/intel_dp_link_training.c +18 -2
index e4f1843170b7..db078780542f 100644
@@ -37,12 +37,24 @@ intel_dp_dump_link_status(const u8 link_status[DP_LINK_STATUS_SIZE])
 void intel_dp_get_adjust_train(struct intel_dp *intel_dp,
 			       const u8 link_status[DP_LINK_STATUS_SIZE])
 {
+	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
 	u8 v = 0;
 	u8 p = 0;
 	int lane;
 	u8 voltage_max;
 	u8 preemph_max;
 
+	if (intel_dp->try_hobl) {
+		/*
+		 * Do not adjust, try now with the regular table using VSwing 0
+		 * and pre-emp 0
+		 */
+		intel_dp->try_hobl = false;
+		drm_dbg_kms(&dev_priv->drm, "HOBL vswing table failed link "
+			    "training, switching back to regular table\n");
+		return;
+	}
+
 	for (lane = 0; lane < intel_dp->lane_count; lane++) {
 		u8 this_v = drm_dp_get_adjust_request_voltage(link_status, lane);
 		u8 this_p = drm_dp_get_adjust_request_pre_emphasis(link_status, lane);
@@ -92,9 +104,13 @@ intel_dp_set_link_train(struct intel_dp *intel_dp,
 }
 
 static bool
-intel_dp_reset_link_train(struct intel_dp *intel_dp,
-			u8 dp_train_pat)
+intel_dp_reset_link_train(struct intel_dp *intel_dp, u8 dp_train_pat)
 {
+	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+
+	if (intel_dp_is_edp(intel_dp) && dev_priv->vbt.edp.hobl)
+		intel_dp->try_hobl = true;
+
 	memset(intel_dp->train_set, 0, sizeof(intel_dp->train_set));
 	intel_dp_set_signal_levels(intel_dp);
 	return intel_dp_set_link_train(intel_dp, dp_train_pat);
drivers/gpu/drm/i915/i915_drv.h +2 -0
index 1e060de3edc4..8c2fb4da70fd 100644
@@ -1678,6 +1678,8 @@ IS_SUBPLATFORM(const struct drm_i915_private *i915,
 #define INTEL_DISPLAY_ENABLED(dev_priv) \
 		(drm_WARN_ON(&(dev_priv)->drm, !HAS_DISPLAY(dev_priv)), !i915_modparams.disable_display)
 
+#define HAS_HOBL(dev_priv) (INTEL_GEN(dev_priv) >= 12)
+
 static inline bool intel_vtd_active(void)
 {
 #ifdef CONFIG_INTEL_IOMMU
drivers/gpu/drm/i915/i915_reg.h +2 -0
index e9d50fe0f375..a7a8d12fa49d 100644
@@ -1896,6 +1896,8 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 #define  PWR_DOWN_LN_3_1_0		(0xb << 4)
 #define  PWR_DOWN_LN_MASK		(0xf << 4)
 #define  PWR_DOWN_LN_SHIFT		4
+#define  EDP4K2K_MODE_OVRD_EN		(1 << 3)
+#define  EDP4K2K_MODE_OVRD_OPTIMIZED	(1 << 2)
 
 #define ICL_PORT_CL_DW12(phy)		_MMIO(_ICL_PORT_CL_DW(12, phy))
 #define   ICL_LANE_ENABLE_AUX		(1 << 0)
Signature · 6 lines
2.26.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#3 lore raw

Re: [Intel-gfx] [PATCH 3/4] drm/i915/display: Implement HOBL

Quoted 29 lines · José Roberto de Souza

Hours Of Battery Life is a new GEN12+ power-saving feature that allows supported motherboards to use a special voltage swing table for eDP panels that uses less power.

So here if supported by HW, OEM will set it in VBT and i915 will try to train link with HOBL vswing table if link training fails it fall back to the original table.

Just not sure if DP compliance should also use this new voltage swing table too, cced some folks that worked in DP compliance.

BSpec: 49291
BSpec: 49399

---
 drivers/gpu/drm/i915/display/intel_ddi.c      | 48 +++++++++++++++++--
 .../drm/i915/display/intel_display_types.h    |  2 +
 .../drm/i915/display/intel_dp_link_training.c | 20 +++++++-
 drivers/gpu/drm/i915/i915_drv.h               |  2 +
 drivers/gpu/drm/i915/i915_reg.h               |  2 +
 5 files changed, 69 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/display/intel_ddi.c +0 -0
index c100efc6a2c4..a44e190de79f 100644

drivers/gpu/drm/i915/display/intel_ddi.c static const struct cnl_ddi_buf_trans tgl_combo_phy_ddi_translations_dp_hbr2[] = · line 697

Quoted 6 lines
drivers/gpu/drm/i915/display/intel_ddi.c +3 -0
@@ -692,6 +692,10 @@ static const struct cnl_ddi_buf_trans tgl_combo_phy_ddi_translations_dp_hbr2[] =
 	{ 0x6, 0x7F, 0x3F, 0x00, 0x00 },	/* 900   900      0.0   */
 };
 
+static const struct cnl_ddi_buf_trans tgl_combo_phy_ddi_translations_edp_hbr2_hobl[] = {
+	{ 0x6, 0x7F, 0x3F, 0x00, 0x00 }
+};

This doesn't seem to mesh well with the notion of "at least everything up to vswing 2/preemph 2 is mandatory", as laid out in https://patchwork.freedesktop.org/series/77198/

Hmm. I was going to add some WARNs there to make sure .{voltage,preemph}_max() always return level 2 or level 3. But looks like I failed to actually do it.

Quoted 166 lines
drivers/gpu/drm/i915/display/intel_ddi.c +42 -3
+
 static const struct ddi_buf_trans *
 bdw_get_buf_trans_edp(struct drm_i915_private *dev_priv, int *n_entries)
 {
@@ -2297,14 +2301,51 @@ static void cnl_ddi_vswing_sequence(struct intel_encoder *encoder,
 	intel_de_write(dev_priv, CNL_PORT_TX_DW5_GRP(port), val);
 }
 
+/*
+ * If supported return HOBL vswing table and set registers to enable HOBL
+ * otherwise returns NULL and unset registers to enable HOBL.
+ */
+static const struct cnl_ddi_buf_trans *
+hobl_get_combo_buf_trans(struct drm_i915_private *dev_priv,
+			 struct intel_encoder *encoder, int type, int rate,
+			 u32 level, int *n_entries)
+{
+	const u32 hobl_en = EDP4K2K_MODE_OVRD_EN | EDP4K2K_MODE_OVRD_OPTIMIZED;
+	enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
+	struct intel_dp *intel_dp;
+
+	if (!HAS_HOBL(dev_priv) || type != INTEL_OUTPUT_EDP)
+		return NULL;
+
+	intel_dp = enc_to_intel_dp(encoder);
+	if (!intel_dp->try_hobl || rate > 540000) {
+		intel_de_rmw(dev_priv, ICL_PORT_CL_DW10(phy), hobl_en, 0);
+		return NULL;
+	}
+
+	drm_dbg_kms(&dev_priv->drm, "Enabling HOBL in PHY %c\n", phy_name(phy));
+	drm_WARN_ON_ONCE(&dev_priv->drm, level > 0);
+
+	intel_de_rmw(dev_priv, ICL_PORT_CL_DW10(phy), hobl_en, hobl_en);
+	/* Same table applies to TGL, RKL and DG1 */
+	*n_entries = ARRAY_SIZE(tgl_combo_phy_ddi_translations_edp_hbr2_hobl);
+	return tgl_combo_phy_ddi_translations_edp_hbr2_hobl;
+}
+
 static void icl_ddi_combo_vswing_program(struct drm_i915_private *dev_priv,
-					u32 level, enum phy phy, int type,
-					int rate)
+					 struct intel_encoder *encoder,
+					 u32 level, enum phy phy, int type,
+					 int rate)
 {
 	const struct cnl_ddi_buf_trans *ddi_translations = NULL;
 	u32 n_entries, val;
 	int ln;
 
+	ddi_translations = hobl_get_combo_buf_trans(dev_priv, encoder, type,
+						    rate, level, &n_entries);
+	if (ddi_translations)
+		goto hobl_found;
+
 	if (INTEL_GEN(dev_priv) >= 12)
 		ddi_translations = tgl_get_combo_buf_trans(dev_priv, type, rate,
 							   &n_entries);
@@ -2317,6 +2358,7 @@ static void icl_ddi_combo_vswing_program(struct drm_i915_private *dev_priv,
 	if (!ddi_translations)
 		return;
 
+hobl_found:
 	if (level >= n_entries) {
 		drm_dbg_kms(&dev_priv->drm,
 			    "DDI translation not found for level %d. Using %d instead.",
@@ -2424,7 +2466,7 @@ static void icl_combo_phy_ddi_vswing_sequence(struct intel_encoder *encoder,
 	intel_de_write(dev_priv, ICL_PORT_TX_DW5_GRP(phy), val);
 
 	/* 5. Program swing and de-emphasis */
-	icl_ddi_combo_vswing_program(dev_priv, level, phy, type, rate);
+	icl_ddi_combo_vswing_program(dev_priv, encoder, level, phy, type, rate);
 
 	/* 6. Set training enable to trigger update */
 	val = intel_de_read(dev_priv, ICL_PORT_TX_DW5_LN0(phy));
drivers/gpu/drm/i915/display/intel_display_types.h +2 -0
index 30b2767578dc..9e7dbff7dd43 100644
@@ -1365,6 +1365,8 @@ struct intel_dp {
 
 	/* Display stream compression testing */
 	bool force_dsc_en;
+
+	bool try_hobl;
 };
 
 enum lspcon_vendor {
drivers/gpu/drm/i915/display/intel_dp_link_training.c +18 -2
index e4f1843170b7..db078780542f 100644
@@ -37,12 +37,24 @@ intel_dp_dump_link_status(const u8 link_status[DP_LINK_STATUS_SIZE])
 void intel_dp_get_adjust_train(struct intel_dp *intel_dp,
 			       const u8 link_status[DP_LINK_STATUS_SIZE])
 {
+	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
 	u8 v = 0;
 	u8 p = 0;
 	int lane;
 	u8 voltage_max;
 	u8 preemph_max;
 
+	if (intel_dp->try_hobl) {
+		/*
+		 * Do not adjust, try now with the regular table using VSwing 0
+		 * and pre-emp 0
+		 */
+		intel_dp->try_hobl = false;
+		drm_dbg_kms(&dev_priv->drm, "HOBL vswing table failed link "
+			    "training, switching back to regular table\n");
+		return;
+	}
+
 	for (lane = 0; lane < intel_dp->lane_count; lane++) {
 		u8 this_v = drm_dp_get_adjust_request_voltage(link_status, lane);
 		u8 this_p = drm_dp_get_adjust_request_pre_emphasis(link_status, lane);
@@ -92,9 +104,13 @@ intel_dp_set_link_train(struct intel_dp *intel_dp,
 }
 
 static bool
-intel_dp_reset_link_train(struct intel_dp *intel_dp,
-			u8 dp_train_pat)
+intel_dp_reset_link_train(struct intel_dp *intel_dp, u8 dp_train_pat)
 {
+	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+
+	if (intel_dp_is_edp(intel_dp) && dev_priv->vbt.edp.hobl)
+		intel_dp->try_hobl = true;
+
 	memset(intel_dp->train_set, 0, sizeof(intel_dp->train_set));
 	intel_dp_set_signal_levels(intel_dp);
 	return intel_dp_set_link_train(intel_dp, dp_train_pat);
drivers/gpu/drm/i915/i915_drv.h +2 -0
index 1e060de3edc4..8c2fb4da70fd 100644
@@ -1678,6 +1678,8 @@ IS_SUBPLATFORM(const struct drm_i915_private *i915,
 #define INTEL_DISPLAY_ENABLED(dev_priv) \
 		(drm_WARN_ON(&(dev_priv)->drm, !HAS_DISPLAY(dev_priv)), !i915_modparams.disable_display)
 
+#define HAS_HOBL(dev_priv) (INTEL_GEN(dev_priv) >= 12)
+
 static inline bool intel_vtd_active(void)
 {
 #ifdef CONFIG_INTEL_IOMMU
drivers/gpu/drm/i915/i915_reg.h +2 -0
index e9d50fe0f375..a7a8d12fa49d 100644
@@ -1896,6 +1896,8 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 #define  PWR_DOWN_LN_3_1_0		(0xb << 4)
 #define  PWR_DOWN_LN_MASK		(0xf << 4)
 #define  PWR_DOWN_LN_SHIFT		4
+#define  EDP4K2K_MODE_OVRD_EN		(1 << 3)
+#define  EDP4K2K_MODE_OVRD_OPTIMIZED	(1 << 2)
 
 #define ICL_PORT_CL_DW12(phy)		_MMIO(_ICL_PORT_CL_DW(12, phy))
 #define   ICL_LANE_ENABLE_AUX		(1 << 0)
Signature · 6 lines
2.26.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 6 lines
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#4 lore raw

Re: [Intel-gfx] [PATCH 3/4] drm/i915/display: Implement HOBL

Quoted 41 lines · Ville Syrjälä
Quoted 29 lines · José Roberto de Souza

Hours Of Battery Life is a new GEN12+ power-saving feature that allows supported motherboards to use a special voltage swing table for eDP panels that uses less power.

So here if supported by HW, OEM will set it in VBT and i915 will try to train link with HOBL vswing table if link training fails it fall back to the original table.

Just not sure if DP compliance should also use this new voltage swing table too, cced some folks that worked in DP compliance.

BSpec: 49291
BSpec: 49399

---
 drivers/gpu/drm/i915/display/intel_ddi.c      | 48 +++++++++++++++++--
 .../drm/i915/display/intel_display_types.h    |  2 +
 .../drm/i915/display/intel_dp_link_training.c | 20 +++++++-
 drivers/gpu/drm/i915/i915_drv.h               |  2 +
 drivers/gpu/drm/i915/i915_reg.h               |  2 +
 5 files changed, 69 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/display/intel_ddi.c +0 -0
index c100efc6a2c4..a44e190de79f 100644

drivers/gpu/drm/i915/display/intel_ddi.c static const struct cnl_ddi_buf_trans tgl_combo_phy_ddi_translations_dp_hbr2[] = · line 697

Quoted 6 lines
drivers/gpu/drm/i915/display/intel_ddi.c +3 -0
@@ -692,6 +692,10 @@ static const struct cnl_ddi_buf_trans tgl_combo_phy_ddi_translations_dp_hbr2[] =
 	{ 0x6, 0x7F, 0x3F, 0x00, 0x00 },	/* 900   900      0.0   */
 };
 
+static const struct cnl_ddi_buf_trans tgl_combo_phy_ddi_translations_edp_hbr2_hobl[] = {
+	{ 0x6, 0x7F, 0x3F, 0x00, 0x00 }
+};

This doesn't seem to mesh well with the notion of "at least everything up to vswing 2/preemph 2 is mandatory", as laid out in https://patchwork.freedesktop.org/series/77198/

Quoted 3 lines

Hmm. I was going to add some WARNs there to make sure .{voltage,preemph}_max() always return level 2 or level 3. But looks like I failed to actually do it.

Even if you had, intel_dp_voltage_max() is not aware of this new table and if/when it is executed is because the voltage 0 and preemph 0 of the regular table also failed the link training.

Quoted 163 lines
Quoted 163 lines
drivers/gpu/drm/i915/display/intel_ddi.c +42 -3
+
 static const struct ddi_buf_trans *
 bdw_get_buf_trans_edp(struct drm_i915_private *dev_priv, int *n_entries)
 {
@@ -2297,14 +2301,51 @@ static void cnl_ddi_vswing_sequence(struct intel_encoder *encoder,
 	intel_de_write(dev_priv, CNL_PORT_TX_DW5_GRP(port), val);
 }
 
+/*
+ * If supported return HOBL vswing table and set registers to enable HOBL
+ * otherwise returns NULL and unset registers to enable HOBL.
+ */
+static const struct cnl_ddi_buf_trans *
+hobl_get_combo_buf_trans(struct drm_i915_private *dev_priv,
+			 struct intel_encoder *encoder, int type, int rate,
+			 u32 level, int *n_entries)
+{
+	const u32 hobl_en = EDP4K2K_MODE_OVRD_EN | EDP4K2K_MODE_OVRD_OPTIMIZED;
+	enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
+	struct intel_dp *intel_dp;
+
+	if (!HAS_HOBL(dev_priv) || type != INTEL_OUTPUT_EDP)
+		return NULL;
+
+	intel_dp = enc_to_intel_dp(encoder);
+	if (!intel_dp->try_hobl || rate > 540000) {
+		intel_de_rmw(dev_priv, ICL_PORT_CL_DW10(phy), hobl_en, 0);
+		return NULL;
+	}
+
+	drm_dbg_kms(&dev_priv->drm, "Enabling HOBL in PHY %c\n", phy_name(phy));
+	drm_WARN_ON_ONCE(&dev_priv->drm, level > 0);
+
+	intel_de_rmw(dev_priv, ICL_PORT_CL_DW10(phy), hobl_en, hobl_en);
+	/* Same table applies to TGL, RKL and DG1 */
+	*n_entries = ARRAY_SIZE(tgl_combo_phy_ddi_translations_edp_hbr2_hobl);
+	return tgl_combo_phy_ddi_translations_edp_hbr2_hobl;
+}
+
 static void icl_ddi_combo_vswing_program(struct drm_i915_private *dev_priv,
-					u32 level, enum phy phy, int type,
-					int rate)
+					 struct intel_encoder *encoder,
+					 u32 level, enum phy phy, int type,
+					 int rate)
 {
 	const struct cnl_ddi_buf_trans *ddi_translations = NULL;
 	u32 n_entries, val;
 	int ln;
 
+	ddi_translations = hobl_get_combo_buf_trans(dev_priv, encoder, type,
+						    rate, level, &n_entries);
+	if (ddi_translations)
+		goto hobl_found;
+
 	if (INTEL_GEN(dev_priv) >= 12)
 		ddi_translations = tgl_get_combo_buf_trans(dev_priv, type, rate,
 							   &n_entries);
@@ -2317,6 +2358,7 @@ static void icl_ddi_combo_vswing_program(struct drm_i915_private *dev_priv,
 	if (!ddi_translations)
 		return;
 
+hobl_found:
 	if (level >= n_entries) {
 		drm_dbg_kms(&dev_priv->drm,
 			    "DDI translation not found for level %d. Using %d instead.",
@@ -2424,7 +2466,7 @@ static void icl_combo_phy_ddi_vswing_sequence(struct intel_encoder *encoder,
 	intel_de_write(dev_priv, ICL_PORT_TX_DW5_GRP(phy), val);
 
 	/* 5. Program swing and de-emphasis */
-	icl_ddi_combo_vswing_program(dev_priv, level, phy, type, rate);
+	icl_ddi_combo_vswing_program(dev_priv, encoder, level, phy, type, rate);
 
 	/* 6. Set training enable to trigger update */
 	val = intel_de_read(dev_priv, ICL_PORT_TX_DW5_LN0(phy));
drivers/gpu/drm/i915/display/intel_display_types.h +2 -0
index 30b2767578dc..9e7dbff7dd43 100644
@@ -1365,6 +1365,8 @@ struct intel_dp {
 
 	/* Display stream compression testing */
 	bool force_dsc_en;
+
+	bool try_hobl;
 };
 
 enum lspcon_vendor {
drivers/gpu/drm/i915/display/intel_dp_link_training.c +18 -2
index e4f1843170b7..db078780542f 100644
@@ -37,12 +37,24 @@ intel_dp_dump_link_status(const u8 link_status[DP_LINK_STATUS_SIZE])
 void intel_dp_get_adjust_train(struct intel_dp *intel_dp,
 			       const u8 link_status[DP_LINK_STATUS_SIZE])
 {
+	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
 	u8 v = 0;
 	u8 p = 0;
 	int lane;
 	u8 voltage_max;
 	u8 preemph_max;
 
+	if (intel_dp->try_hobl) {
+		/*
+		 * Do not adjust, try now with the regular table using VSwing 0
+		 * and pre-emp 0
+		 */
+		intel_dp->try_hobl = false;
+		drm_dbg_kms(&dev_priv->drm, "HOBL vswing table failed link "
+			    "training, switching back to regular table\n");
+		return;
+	}
+
 	for (lane = 0; lane < intel_dp->lane_count; lane++) {
 		u8 this_v = drm_dp_get_adjust_request_voltage(link_status, lane);
 		u8 this_p = drm_dp_get_adjust_request_pre_emphasis(link_status, lane);
@@ -92,9 +104,13 @@ intel_dp_set_link_train(struct intel_dp *intel_dp,
 }
 
 static bool
-intel_dp_reset_link_train(struct intel_dp *intel_dp,
-			u8 dp_train_pat)
+intel_dp_reset_link_train(struct intel_dp *intel_dp, u8 dp_train_pat)
 {
+	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+
+	if (intel_dp_is_edp(intel_dp) && dev_priv->vbt.edp.hobl)
+		intel_dp->try_hobl = true;
+
 	memset(intel_dp->train_set, 0, sizeof(intel_dp->train_set));
 	intel_dp_set_signal_levels(intel_dp);
 	return intel_dp_set_link_train(intel_dp, dp_train_pat);
drivers/gpu/drm/i915/i915_drv.h +2 -0
index 1e060de3edc4..8c2fb4da70fd 100644
@@ -1678,6 +1678,8 @@ IS_SUBPLATFORM(const struct drm_i915_private *i915,
 #define INTEL_DISPLAY_ENABLED(dev_priv) \
 		(drm_WARN_ON(&(dev_priv)->drm, !HAS_DISPLAY(dev_priv)), !i915_modparams.disable_display)
 
+#define HAS_HOBL(dev_priv) (INTEL_GEN(dev_priv) >= 12)
+
 static inline bool intel_vtd_active(void)
 {
 #ifdef CONFIG_INTEL_IOMMU
drivers/gpu/drm/i915/i915_reg.h +2 -0
index e9d50fe0f375..a7a8d12fa49d 100644
@@ -1896,6 +1896,8 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 #define  PWR_DOWN_LN_3_1_0		(0xb << 4)
 #define  PWR_DOWN_LN_MASK		(0xf << 4)
 #define  PWR_DOWN_LN_SHIFT		4
+#define  EDP4K2K_MODE_OVRD_EN		(1 << 3)
+#define  EDP4K2K_MODE_OVRD_OPTIMIZED	(1 << 2)
 
 #define ICL_PORT_CL_DW12(phy)		_MMIO(_ICL_PORT_CL_DW(12, phy))
 #define   ICL_LANE_ENABLE_AUX		(1 << 0)
Signature · 1 line
2.26.2
Quoted 4 lines
Quoted 4 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#5 lore raw

PATCH 4/4 drm/i915/display: Enable HOBL regardless the VBT value

In reply to José Roberto de Souza

HOBL worked in my TGL RVP even without the necessary HW support, also it worked in more than half of the TGL machines in CI so it is worthy to enable it by default.
Even if link training fails with this new vswing table it will only cause one additional link training, that is worthy the try to get the additional power-savings.

---
 drivers/gpu/drm/i915/display/intel_dp_link_training.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/display/intel_dp_link_training.c +1 -1
index db078780542f..86de1187d363 100644
@@ -108,7 +108,7 @@ intel_dp_reset_link_train(struct intel_dp *intel_dp, u8 dp_train_pat)
 {
 	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
 
-	if (intel_dp_is_edp(intel_dp) && dev_priv->vbt.edp.hobl)
+	if (HAS_HOBL(dev_priv) && intel_dp_is_edp(intel_dp))
 		intel_dp->try_hobl = true;
 
 	memset(intel_dp->train_set, 0, sizeof(intel_dp->train_set));
Signature · 6 lines
2.26.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#6 lore raw

[Intel-gfx] ✗ Fi.CI.SPARSE: warning for series starting with [1/4] drm/i915/display/hsw+: Do not program the same vswing entry twice

In reply to José Roberto de Souza
== Series Details ==

== Series Details ==

Series: series starting with [1/4] drm/i915/display/hsw+: Do not program the same vswing entry twice
URL : https://patchwork.freedesktop.org/series/77758/
State : warning

== Summary ==

$ dim sparse --fast origin/drm-tip
Sparse version: v0.6.0
Fast mode used, each commit won't be checked separately.
-
+drivers/gpu/drm/i915/display/intel_display.c:1222:22: error: Expected constant expression in case statement
+drivers/gpu/drm/i915/display/intel_display.c:1225:22: error: Expected constant expression in case statement
+drivers/gpu/drm/i915/display/intel_display.c:1228:22: error: Expected constant expression in case statement
+drivers/gpu/drm/i915/display/intel_display.c:1231:22: error: Expected constant expression in case statement
+drivers/gpu/drm/i915/gem/i915_gem_context.c:2274:17: error: bad integer constant expression
+drivers/gpu/drm/i915/gem/i915_gem_context.c:2275:17: error: bad integer constant expression
+drivers/gpu/drm/i915/gem/i915_gem_context.c:2276:17: error: bad integer constant expression
+drivers/gpu/drm/i915/gem/i915_gem_context.c:2277:17: error: bad integer constant expression
+drivers/gpu/drm/i915/gem/i915_gem_context.c:2278:17: error: bad integer constant expression
+drivers/gpu/drm/i915/gem/i915_gem_context.c:2279:17: error: bad integer constant expression
+drivers/gpu/drm/i915/gt/intel_reset.c:1310:5: warning: context imbalance in 'intel_gt_reset_trylock' - different lock contexts for basic block
+drivers/gpu/drm/i915/gt/sysfs_engines.c:61:10: error: bad integer constant expression
+drivers/gpu/drm/i915/gt/sysfs_engines.c:62:10: error: bad integer constant expression
+drivers/gpu/drm/i915/gt/sysfs_engines.c:66:10: error: bad integer constant expression
+drivers/gpu/drm/i915/gvt/mmio.c:287:23: warning: memcpy with byte count of 279040
+drivers/gpu/drm/i915/i915_perf.c:1425:15: warning: memset with byte count of 16777216
+drivers/gpu/drm/i915/i915_perf.c:1479:15: warning: memset with byte count of 16777216
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'fwtable_read16' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'fwtable_read32' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'fwtable_read64' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'fwtable_read8' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'fwtable_write16' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'fwtable_write32' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'fwtable_write8' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'gen11_fwtable_read16' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'gen11_fwtable_read32' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'gen11_fwtable_read64' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'gen11_fwtable_read8' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'gen11_fwtable_write16' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'gen11_fwtable_write32' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'gen11_fwtable_write8' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'gen12_fwtable_read16' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'gen12_fwtable_read32' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'gen12_fwtable_read64' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'gen12_fwtable_read8' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'gen12_fwtable_write16' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'gen12_fwtable_write32' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'gen12_fwtable_write8' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'gen6_read16' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'gen6_read32' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'gen6_read64' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'gen6_read8' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'gen6_write16' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'gen6_write32' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'gen6_write8' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'gen8_write16' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'gen8_write32' - different lock contexts for basic block
+./include/linux/spinlock.h:408:9: warning: context imbalance in 'gen8_write8' - different lock contexts for basic block

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#7 lore raw

[Intel-gfx] ✓ Fi.CI.BAT: success for series starting with [1/4] drm/i915/display/hsw+: Do not program the same vswing entry twice

In reply to José Roberto de Souza
== Series Details ==

== Series Details ==

Series: series starting with [1/4] drm/i915/display/hsw+: Do not program the same vswing entry twice
URL : https://patchwork.freedesktop.org/series/77758/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_8549 -> Patchwork_17806
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17806/index.html

Known issues
------------

Here are the changes found in Patchwork_17806 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@kms_chamelium@dp-crc-fast:
- fi-icl-u2: [PASS][1] -> [FAIL][2] ([i915#262])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8549/fi-icl-u2/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17806/fi-icl-u2/igt@[email protected]

* igt@kms_chamelium@dp-edid-read:
- fi-icl-u2: [PASS][3] -> [FAIL][4] ([i915#976])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8549/fi-icl-u2/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17806/fi-icl-u2/igt@[email protected]

[i915#262]: https://gitlab.freedesktop.org/drm/intel/issues/262
[i915#976]: https://gitlab.freedesktop.org/drm/intel/issues/976

Participating hosts (50 -> 41)
------------------------------

Missing (9): fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-kbl-7560u fi-byt-n2820 fi-byt-clapper fi-bdw-samus

Build changes
-------------

* Linux: CI_DRM_8549 -> Patchwork_17806

CI-20190529: 20190529
CI_DRM_8549: e50e9c6bf4efd00b02d91ff470993bbd0db94f67 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5682: e5371a99a877be134c6ad5361a5f03843a66f775 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_17806: 243da8b64910288d152b148272e64fa8301d62f4 @ git://anongit.freedesktop.org/gfx-ci/linux

== Linux commits ==

243da8b64910 drm/i915/display: Enable HOBL regardless the VBT value 957a89b1b93d drm/i915/display: Implement HOBL
ee42cab5f9b5 drm/i915/bios: Parse HOBL parameter
245f5bdf6d69 drm/i915/display/hsw+: Do not program the same vswing entry twice

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17806/index.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#8 lore raw

[Intel-gfx] ✗ Fi.CI.IGT: failure for series starting with [1/4] drm/i915/display/hsw+: Do not program the same vswing entry twice

In reply to José Roberto de Souza
== Series Details ==

== Series Details ==

Series: series starting with [1/4] drm/i915/display/hsw+: Do not program the same vswing entry twice
URL : https://patchwork.freedesktop.org/series/77758/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_8549_full -> Patchwork_17806_full
====================================================

Summary
-------

**FAILURE**

Serious unknown changes coming with Patchwork_17806_full absolutely need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in Patchwork_17806_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in Patchwork_17806_full:

### IGT changes ###

#### Possible regressions ####

* igt@gen9_exec_parse@bb-chained:
- shard-glk: NOTRUN -> [TIMEOUT][1] +6 similar issues
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17806/shard-glk9/igt@[email protected]

Known issues
------------

Here are the changes found in Patchwork_17806_full that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_exec_suspend@basic-s0:
- shard-tglb: [PASS][2] -> [INCOMPLETE][3] ([i915#1602] / [i915#456])
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8549/shard-tglb8/igt@[email protected]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17806/shard-tglb5/igt@[email protected]

* igt@kms_cursor_crc@pipe-a-cursor-256x85-offscreen:
- shard-kbl: [PASS][4] -> [FAIL][5] ([i915#54] / [i915#93] / [i915#95])
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8549/shard-kbl4/igt@[email protected]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17806/shard-kbl6/igt@[email protected]

* igt@kms_cursor_crc@pipe-a-cursor-suspend:
- shard-kbl: [PASS][6] -> [DMESG-WARN][7] ([i915#180]) +2 similar issues
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8549/shard-kbl2/igt@[email protected]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17806/shard-kbl7/igt@[email protected]

* igt@kms_hdr@bpc-switch-suspend:
- shard-skl: [PASS][8] -> [FAIL][9] ([i915#1188])
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8549/shard-skl4/igt@[email protected]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17806/shard-skl9/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-c-coverage-7efc:
- shard-skl: [PASS][10] -> [FAIL][11] ([fdo#108145] / [i915#265]) +2 similar issues
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8549/shard-skl4/igt@[email protected]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17806/shard-skl9/igt@[email protected]

* igt@kms_psr@psr2_cursor_blt:
- shard-iclb: [PASS][12] -> [SKIP][13] ([fdo#109441]) +1 similar issue
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8549/shard-iclb2/igt@kms_psr@psr2_cursor_blt.html
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17806/shard-iclb6/igt@kms_psr@psr2_cursor_blt.html

* igt@kms_setmode@basic:
- shard-hsw: [PASS][14] -> [FAIL][15] ([i915#31])
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8549/shard-hsw4/igt@[email protected]
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17806/shard-hsw4/igt@[email protected]

#### Possible fixes ####

* igt@gem_eio@in-flight-suspend:
- shard-skl: [INCOMPLETE][16] ([i915#69]) -> [PASS][17] +1 similar issue
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8549/shard-skl4/igt@[email protected]
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17806/shard-skl9/igt@[email protected]

* {igt@gem_exec_reloc@basic-concurrent0}:
- shard-apl: [FAIL][18] ([i915#1930]) -> [PASS][19]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8549/shard-apl7/igt@[email protected]
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17806/shard-apl3/igt@[email protected]

* {igt@gem_exec_reloc@basic-concurrent16}:
- shard-skl: [FAIL][20] ([i915#1930]) -> [PASS][21]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8549/shard-skl2/igt@[email protected]
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17806/shard-skl7/igt@[email protected]

* igt@i915_pm_rpm@system-suspend:
- shard-kbl: [FAIL][22] ([fdo#103375]) -> [PASS][23]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8549/shard-kbl2/igt@[email protected]
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17806/shard-kbl7/igt@[email protected]

* igt@i915_suspend@forcewake:
- shard-skl: [INCOMPLETE][24] ([i915#636] / [i915#69]) -> [PASS][25]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8549/shard-skl1/igt@[email protected]
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17806/shard-skl1/igt@[email protected]

* igt@kms_cursor_legacy@cursorb-vs-flipa-toggle:
- shard-glk: [DMESG-WARN][26] ([i915#1926]) -> [PASS][27]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8549/shard-glk8/igt@[email protected]
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17806/shard-glk1/igt@[email protected]

* {igt@kms_flip@flip-vs-suspend-interruptible@a-edp1}:
- shard-skl: [INCOMPLETE][28] ([i915#198]) -> [PASS][29]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8549/shard-skl2/igt@kms_flip@[email protected]
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17806/shard-skl7/igt@kms_flip@[email protected]

* {igt@kms_flip@flip-vs-suspend-interruptible@c-dp1}:
- shard-apl: [DMESG-WARN][30] ([i915#180]) -> [PASS][31] +2 similar issues
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8549/shard-apl8/igt@kms_flip@[email protected]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17806/shard-apl6/igt@kms_flip@[email protected]

* igt@kms_plane@plane-panning-bottom-right-suspend-pipe-a-planes:
- shard-kbl: [DMESG-WARN][32] ([i915#180]) -> [PASS][33]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8549/shard-kbl7/igt@[email protected]
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17806/shard-kbl6/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-c-constant-alpha-min:
- shard-skl: [FAIL][34] ([fdo#108145] / [i915#265]) -> [PASS][35]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8549/shard-skl9/igt@[email protected]
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17806/shard-skl6/igt@[email protected]

* igt@kms_psr@psr2_cursor_plane_onoff:
- shard-iclb: [SKIP][36] ([fdo#109441]) -> [PASS][37]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8549/shard-iclb3/igt@kms_psr@psr2_cursor_plane_onoff.html
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17806/shard-iclb2/igt@kms_psr@psr2_cursor_plane_onoff.html

#### Warnings ####

* igt@i915_pm_dc@dc6-psr:
- shard-tglb: [SKIP][38] ([i915#468]) -> [FAIL][39] ([i915#454])
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8549/shard-tglb2/igt@[email protected]
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17806/shard-tglb1/igt@[email protected]

* igt@kms_content_protection@legacy:
- shard-apl: [FAIL][40] ([fdo#110321] / [fdo#110336]) -> [TIMEOUT][41] ([i915#1319] / [i915#1635])
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8549/shard-apl7/igt@[email protected]
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17806/shard-apl3/igt@[email protected]

* igt@kms_cursor_legacy@cursora-vs-flipb-toggle:
- shard-glk: [DMESG-WARN][42] ([i915#1926]) -> [DMESG-WARN][43] ([i915#1927])
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8549/shard-glk1/igt@[email protected]
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17806/shard-glk7/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-a-alpha-7efc:
- shard-apl: [FAIL][44] ([fdo#108145] / [i915#265] / [i915#95]) -> [FAIL][45] ([fdo#108145] / [i915#265])
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8549/shard-apl4/igt@[email protected]
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17806/shard-apl8/igt@[email protected]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#103375]: https://bugs.freedesktop.org/show_bug.cgi?id=103375
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[fdo#110321]: https://bugs.freedesktop.org/show_bug.cgi?id=110321
[fdo#110336]: https://bugs.freedesktop.org/show_bug.cgi?id=110336
[i915#1188]: https://gitlab.freedesktop.org/drm/intel/issues/1188
[i915#1319]: https://gitlab.freedesktop.org/drm/intel/issues/1319
[i915#1602]: https://gitlab.freedesktop.org/drm/intel/issues/1602
[i915#1635]: https://gitlab.freedesktop.org/drm/intel/issues/1635
[i915#180]: https://gitlab.freedesktop.org/drm/intel/issues/180
[i915#1926]: https://gitlab.freedesktop.org/drm/intel/issues/1926
[i915#1927]: https://gitlab.freedesktop.org/drm/intel/issues/1927
[i915#1930]: https://gitlab.freedesktop.org/drm/intel/issues/1930
[i915#198]: https://gitlab.freedesktop.org/drm/intel/issues/198
[i915#265]: https://gitlab.freedesktop.org/drm/intel/issues/265
[i915#31]: https://gitlab.freedesktop.org/drm/intel/issues/31
[i915#454]: https://gitlab.freedesktop.org/drm/intel/issues/454
[i915#456]: https://gitlab.freedesktop.org/drm/intel/issues/456
[i915#468]: https://gitlab.freedesktop.org/drm/intel/issues/468
[i915#54]: https://gitlab.freedesktop.org/drm/intel/issues/54
[i915#58]: https://gitlab.freedesktop.org/drm/intel/issues/58
[i915#636]: https://gitlab.freedesktop.org/drm/intel/issues/636
[i915#69]: https://gitlab.freedesktop.org/drm/intel/issues/69
[i915#93]: https://gitlab.freedesktop.org/drm/intel/issues/93
[i915#95]: https://gitlab.freedesktop.org/drm/intel/issues/95
[k.org#198133]: https://bugzilla.kernel.org/show_bug.cgi?id=198133

Participating hosts (11 -> 11)
------------------------------

No changes in participating hosts

Build changes
-------------

* Linux: CI_DRM_8549 -> Patchwork_17806

CI-20190529: 20190529
CI_DRM_8549: e50e9c6bf4efd00b02d91ff470993bbd0db94f67 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5682: e5371a99a877be134c6ad5361a5f03843a66f775 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_17806: 243da8b64910288d152b148272e64fa8301d62f4 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17806/index.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#9 lore raw
In reply to José Roberto de Souza
Quoted 23 lines · José Roberto de Souza

It will be programed right before the link training, so no need to do it twice.
It will not strictly follow BSpec sequences but most of this sequences are not matching anyways.

---
 drivers/gpu/drm/i915/display/intel_ddi.c | 19 ++++---------------
 1 file changed, 4 insertions(+), 15 deletions(-)
drivers/gpu/drm/i915/display/intel_ddi.c +0 -1
index aa22465bb56e..c100efc6a2c4 100644
@@ -3115,7 +3115,6 @@ static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state,
 	enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
 	struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
 	bool is_mst = intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST);
-	int level = intel_ddi_dp_level(intel_dp);
 	enum transcoder transcoder = crtc_state->cpu_transcoder;
 
 	intel_dp_set_link_params(intel_dp, crtc_state->port_clock,

drivers/gpu/drm/i915/display/intel_ddi.c static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state, · line 3195

Quoted 10 lines
drivers/gpu/drm/i915/display/intel_ddi.c +4 -3
@@ -3190,9 +3189,10 @@ static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state,
 	 * down this function.
 	 */
 
-	/* 7.e Configure voltage swing and related IO settings */
-	tgl_ddi_vswing_sequence(encoder, crtc_state->port_clock, level,
-				encoder->type);
+	/*
+	 * 7.e Configure voltage swing and related IO settings
+	 * It will be done in intel_dp_start_link_train(), no need to do twice
+	 */

Hmm. Do we still set it up before turning on the port?

Quoted 14 lines
drivers/gpu/drm/i915/display/intel_ddi.c +0 -1
 	/*
 	 * 7.f Combo PHY: Configure PORT_CL_DW10 Static Power Down to power up
@@ -3257,7 +3257,6 @@ static void hsw_ddi_pre_enable_dp(struct intel_atomic_state *state,
 	enum phy phy = intel_port_to_phy(dev_priv, port);
 	struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
 	bool is_mst = intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST);
-	int level = intel_ddi_dp_level(intel_dp);
 
 	if (INTEL_GEN(dev_priv) < 11)
 		drm_WARN_ON(&dev_priv->drm,
@@ -3279,16 +3278,6 @@ static void hsw_ddi_pre_enable_dp(struct intel_atomic_state *state,
 
 	icl_program_mg_dp_mode(dig_port, crtc_state);

drivers/gpu/drm/i915/display/intel_ddi.c static void hsw_ddi_pre_enable_dp(struct intel_atomic_state *state, · line 3290

Quoted 10 lines
drivers/gpu/drm/i915/display/intel_ddi.c +0 -9
 
-	if (INTEL_GEN(dev_priv) >= 11)
-		icl_ddi_vswing_sequence(encoder, crtc_state->port_clock,
-					level, encoder->type);
-	else if (IS_CANNONLAKE(dev_priv))
-		cnl_ddi_vswing_sequence(encoder, level, encoder->type);
-	else if (IS_GEN9_LP(dev_priv))
-		bxt_ddi_vswing_sequence(encoder, level, encoder->type);
-	else
-		intel_prepare_dp_ddi_buffers(encoder, crtc_state);

This last one definitely has to stay IIRC. HSW/BDW/SKL buf trans stuff works quite bit differently than the BXT+ style more manual programming.

Quoted 11 lines
drivers/gpu/drm/i915/display/intel_ddi.c +0 -1
-
 	if (intel_phy_is_combo(dev_priv, phy)) {
 		bool lane_reversal =
 			dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL;
Signature · 6 lines
2.26.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 6 lines
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#10 lore raw
Quoted 27 lines · Ville Syrjälä
Quoted 26 lines · José Roberto de Souza

It will be programed right before the link training, so no need to do it twice.
It will not strictly follow BSpec sequences but most of this sequences are not matching anyways.

---
 drivers/gpu/drm/i915/display/intel_ddi.c | 19 ++++---------------
 1 file changed, 4 insertions(+), 15 deletions(-)
drivers/gpu/drm/i915/display/intel_ddi.c +0 -1
index aa22465bb56e..c100efc6a2c4 100644
@@ -3115,7 +3115,6 @@ static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state,
 	enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
 	struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
 	bool is_mst = intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST);
-	int level = intel_ddi_dp_level(intel_dp);
 	enum transcoder transcoder = crtc_state->cpu_transcoder;
 
 	intel_dp_set_link_params(intel_dp, crtc_state->port_clock,
@@ -3190,9 +3189,10 @@ static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state,
 	 * down this function.
 	 */
 
Quoted 9 lines

drivers/gpu/drm/i915/display/intel_ddi.c static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state, · line 3195

Quoted 7 lines
drivers/gpu/drm/i915/display/intel_ddi.c +4 -3
-	/* 7.e Configure voltage swing and related IO settings */
-	tgl_ddi_vswing_sequence(encoder, crtc_state->port_clock, level,
-				encoder->type);
+	/*
+	 * 7.e Configure voltage swing and related IO settings
+	 * It will be done in intel_dp_start_link_train(), no need to do twice
+	 */

Hmm. Do we still set it up before turning on the port?

No.

intel_dp_start_link_train()

	intel_dp_link_training_clock_recovery()
		intel_dp->prepare_link_retrain(intel_dp)/intel_ddi_prepare_link_retrain();/* Port is enabled here in training mode */

		....

		intel_dp_reset_link_train()
			intel_dp_set_signal_levels() /* Vswing table is set here */

Guess is safer keep programming it twice then?

Quoted 16 lines
Quoted 16 lines
drivers/gpu/drm/i915/display/intel_ddi.c +0 -1
 	/*
 	 * 7.f Combo PHY: Configure PORT_CL_DW10 Static Power Down to power up
@@ -3257,7 +3257,6 @@ static void hsw_ddi_pre_enable_dp(struct intel_atomic_state *state,
 	enum phy phy = intel_port_to_phy(dev_priv, port);
 	struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
 	bool is_mst = intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST);
-	int level = intel_ddi_dp_level(intel_dp);
 
 	if (INTEL_GEN(dev_priv) < 11)
 		drm_WARN_ON(&dev_priv->drm,
@@ -3279,16 +3278,6 @@ static void hsw_ddi_pre_enable_dp(struct intel_atomic_state *state,
 
 	icl_program_mg_dp_mode(dig_port, crtc_state);
 
Quoted 25 lines

drivers/gpu/drm/i915/display/intel_ddi.c static void hsw_ddi_pre_enable_dp(struct intel_atomic_state *state, · line 3290

Quoted 9 lines
drivers/gpu/drm/i915/display/intel_ddi.c +0 -9
-	if (INTEL_GEN(dev_priv) >= 11)
-		icl_ddi_vswing_sequence(encoder, crtc_state->port_clock,
-					level, encoder->type);
-	else if (IS_CANNONLAKE(dev_priv))
-		cnl_ddi_vswing_sequence(encoder, level, encoder->type);
-	else if (IS_GEN9_LP(dev_priv))
-		bxt_ddi_vswing_sequence(encoder, level, encoder->type);
-	else
-		intel_prepare_dp_ddi_buffers(encoder, crtc_state);

This last one definitely has to stay IIRC. HSW/BDW/SKL buf trans stuff works quite bit differently than the BXT+ style more manual programming.

Quoted 11 lines
drivers/gpu/drm/i915/display/intel_ddi.c +0 -1
-
 	if (intel_phy_is_combo(dev_priv, phy)) {
 		bool lane_reversal =
 			dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL;
Signature · 6 lines
2.26.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#11 lore raw
Quoted 41 lines · Jose
Quoted 27 lines · Ville Syrjälä
Quoted 26 lines · José Roberto de Souza

It will be programed right before the link training, so no need to do it twice.
It will not strictly follow BSpec sequences but most of this sequences are not matching anyways.

---
 drivers/gpu/drm/i915/display/intel_ddi.c | 19 ++++---------------
 1 file changed, 4 insertions(+), 15 deletions(-)
drivers/gpu/drm/i915/display/intel_ddi.c +0 -1
index aa22465bb56e..c100efc6a2c4 100644
@@ -3115,7 +3115,6 @@ static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state,
 	enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
 	struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
 	bool is_mst = intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST);
-	int level = intel_ddi_dp_level(intel_dp);
 	enum transcoder transcoder = crtc_state->cpu_transcoder;
 
 	intel_dp_set_link_params(intel_dp, crtc_state->port_clock,
@@ -3190,9 +3189,10 @@ static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state,
 	 * down this function.
 	 */
 
Quoted 9 lines

drivers/gpu/drm/i915/display/intel_ddi.c static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state, · line 3195

Quoted 7 lines
drivers/gpu/drm/i915/display/intel_ddi.c +4 -3
-	/* 7.e Configure voltage swing and related IO settings */
-	tgl_ddi_vswing_sequence(encoder, crtc_state->port_clock, level,
-				encoder->type);
+	/*
+	 * 7.e Configure voltage swing and related IO settings
+	 * It will be done in intel_dp_start_link_train(), no need to do twice
+	 */

Hmm. Do we still set it up before turning on the port?

No.

intel_dp_start_link_train()

Quoted 8 lines
	intel_dp_link_training_clock_recovery()
		intel_dp->prepare_link_retrain(intel_dp)/intel_ddi_prepare_link_retrain();/* Port is enabled here in training mode */

		....

		intel_dp_reset_link_train()
			intel_dp_set_signal_levels() /* Vswing table is set here */

Guess is safer keep programming it twice then?

Probably.

Quoted 43 lines
Quoted 43 lines
Quoted 17 lines
drivers/gpu/drm/i915/display/intel_ddi.c +0 -1
 	/*
 	 * 7.f Combo PHY: Configure PORT_CL_DW10 Static Power Down to power up
@@ -3257,7 +3257,6 @@ static void hsw_ddi_pre_enable_dp(struct intel_atomic_state *state,
 	enum phy phy = intel_port_to_phy(dev_priv, port);
 	struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
 	bool is_mst = intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST);
-	int level = intel_ddi_dp_level(intel_dp);
 
 	if (INTEL_GEN(dev_priv) < 11)
 		drm_WARN_ON(&dev_priv->drm,
@@ -3279,16 +3278,6 @@ static void hsw_ddi_pre_enable_dp(struct intel_atomic_state *state,
 
 	icl_program_mg_dp_mode(dig_port, crtc_state);

drivers/gpu/drm/i915/display/intel_ddi.c static void hsw_ddi_pre_enable_dp(struct intel_atomic_state *state, · line 3290

Quoted 10 lines
drivers/gpu/drm/i915/display/intel_ddi.c +0 -9
 
-	if (INTEL_GEN(dev_priv) >= 11)
-		icl_ddi_vswing_sequence(encoder, crtc_state->port_clock,
-					level, encoder->type);
-	else if (IS_CANNONLAKE(dev_priv))
-		cnl_ddi_vswing_sequence(encoder, level, encoder->type);
-	else if (IS_GEN9_LP(dev_priv))
-		bxt_ddi_vswing_sequence(encoder, level, encoder->type);
-	else
-		intel_prepare_dp_ddi_buffers(encoder, crtc_state);

This last one definitely has to stay IIRC. HSW/BDW/SKL buf trans stuff works quite bit differently than the BXT+ style more manual programming.

Quoted 11 lines
drivers/gpu/drm/i915/display/intel_ddi.c +0 -1
-
 	if (intel_phy_is_combo(dev_priv, phy)) {
 		bool lane_reversal =
 			dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL;
Signature · 6 lines
2.26.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 6 lines
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx