Skip to contentSkip to conversation

microvm: memory config tweaks

PATCH In review Gerd Hoffmann 3 participants 11 messages May 29, 2020 – Jun 17, 2020

lore
Share & tools
lore
#3 lore raw

PATCH v3 3/4 x86: move max-ram-below-4g to pc

In reply to Gerd Hoffmann

Move from X86MachineClass to PCMachineClass so it disappears from microvm machine type property list.

---
 include/hw/i386/pc.h  |  2 ++
 include/hw/i386/x86.h |  4 ----
 hw/i386/pc.c          | 46 +++++++++++++++++++++++++++++++++++++++++++
 hw/i386/pc_piix.c     | 10 +++++-----
 hw/i386/pc_q35.c      | 10 +++++-----
 hw/i386/x86.c         | 46 -------------------------------------------
 hw/i386/xen/xen-hvm.c |  2 +-
 7 files changed, 59 insertions(+), 61 deletions(-)
include/hw/i386/pc.h +2 -0
index 5e3b19ab78fc..dce1273c7dad 100644
@@ -35,6 +35,7 @@ struct PCMachineState {
     PFlashCFI01 *flash[2];
 
     /* Configuration options: */
+    uint64_t max_ram_below_4g;
     OnOffAuto vmport;
 
     bool acpi_build_enabled;
@@ -51,6 +52,7 @@ struct PCMachineState {
 };
 
 #define PC_MACHINE_ACPI_DEVICE_PROP "acpi-device"
+#define PC_MACHINE_MAX_RAM_BELOW_4G "max-ram-below-4g"
 #define PC_MACHINE_DEVMEM_REGION_SIZE "device-memory-region-size"
 #define PC_MACHINE_VMPORT           "vmport"
 #define PC_MACHINE_SMBUS            "smbus"
include/hw/i386/x86.h +0 -4
index b52285481687..b79f24e28545 100644
@@ -51,9 +51,6 @@ typedef struct {
     qemu_irq *gsi;
     GMappedFile *initrd_mapped_file;
 
-    /* Configuration options: */
-    uint64_t max_ram_below_4g;
-
     /* RAM information (sizes, addresses, configuration): */
     ram_addr_t below_4g_mem_size, above_4g_mem_size;
 
@@ -82,7 +79,6 @@ typedef struct {
     AddressSpace *ioapic_as;
 } X86MachineState;
 
-#define X86_MACHINE_MAX_RAM_BELOW_4G "max-ram-below-4g"
 #define X86_MACHINE_SMM              "smm"
 #define X86_MACHINE_ACPI             "acpi"
 
hw/i386/pc.c +46 -0

64 lines not on this page · raw message

hw/i386/pc_piix.c +5 -5
index f66e1d73ce0b..503c35f7bf4c 100644
@@ -127,11 +127,11 @@ static void pc_init1(MachineState *machine,
     if (xen_enabled()) {
         xen_hvm_init(pcms, &ram_memory);
     } else {
-        if (!x86ms->max_ram_below_4g) {
-            x86ms->max_ram_below_4g = 0xe0000000; /* default: 3.5G */
+        if (!pcms->max_ram_below_4g) {
+            pcms->max_ram_below_4g = 0xe0000000; /* default: 3.5G */
         }
-        lowmem = x86ms->max_ram_below_4g;
-        if (machine->ram_size >= x86ms->max_ram_below_4g) {
+        lowmem = pcms->max_ram_below_4g;
+        if (machine->ram_size >= pcms->max_ram_below_4g) {
             if (pcmc->gigabyte_align) {
                 if (lowmem > 0xc0000000) {
                     lowmem = 0xc0000000;
@@ -140,7 +140,7 @@ static void pc_init1(MachineState *machine,
                     warn_report("Large machine and max_ram_below_4g "
                                 "(%" PRIu64 ") not a multiple of 1G; "
                                 "possible bad performance.",
-                                x86ms->max_ram_below_4g);
+                                pcms->max_ram_below_4g);
                 }
             }
         }
hw/i386/pc_q35.c +5 -5
index 4ba8ac8774e4..90e8fb2cb737 100644
@@ -154,18 +154,18 @@ static void pc_q35_init(MachineState *machine)
     /* Handle the machine opt max-ram-below-4g.  It is basically doing
      * min(qemu limit, user limit).
      */
-    if (!x86ms->max_ram_below_4g) {
-        x86ms->max_ram_below_4g = 4 * GiB;
+    if (!pcms->max_ram_below_4g) {
+        pcms->max_ram_below_4g = 4 * GiB;
     }
-    if (lowmem > x86ms->max_ram_below_4g) {
-        lowmem = x86ms->max_ram_below_4g;
+    if (lowmem > pcms->max_ram_below_4g) {
+        lowmem = pcms->max_ram_below_4g;
         if (machine->ram_size - lowmem > lowmem &&
             lowmem & (1 * GiB - 1)) {
             warn_report("There is possibly poor performance as the ram size "
                         " (0x%" PRIx64 ") is more then twice the size of"
                         " max-ram-below-4g (%"PRIu64") and"
                         " max-ram-below-4g is not a multiple of 1G.",
-                        (uint64_t)machine->ram_size, x86ms->max_ram_below_4g);
+                        (uint64_t)machine->ram_size, pcms->max_ram_below_4g);
         }
     }
 
hw/i386/x86.c +0 -46

64 lines not on this page · raw message

hw/i386/xen/xen-hvm.c +1 -1
index 82ece6b9e739..d6f4674418e9 100644
@@ -203,7 +203,7 @@ static void xen_ram_init(PCMachineState *pcms,
     ram_addr_t block_len;
     uint64_t user_lowmem =
         object_property_get_uint(qdev_get_machine(),
-                                 X86_MACHINE_MAX_RAM_BELOW_4G,
+                                 PC_MACHINE_MAX_RAM_BELOW_4G,
                                  &error_abort);
 
     /* Handle the machine opt max-ram-below-4g.  It is basically doing
Signature · 1 line
2.18.4
#5 lore raw

PATCH v3 4/4 microvm: move virtio base to 0xfeb00000

In reply to Gerd Hoffmann

Place virtio-mmio devices near the other mmio regions, next ioapic is at @ 0xfec00000.

---
 include/hw/i386/microvm.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/hw/i386/microvm.h +1 -1
index ba68d1f22bb3..fd34b78e0d2a 100644
@@ -26,7 +26,7 @@
 #include "hw/i386/x86.h"
 
 /* Platform virtio definitions */
-#define VIRTIO_MMIO_BASE      0xc0000000
+#define VIRTIO_MMIO_BASE      0xfeb00000
 #define VIRTIO_IRQ_BASE       5
 #define VIRTIO_NUM_TRANSPORTS 8
 #define VIRTIO_CMDLINE_MAXLEN 64
Signature · 1 line
2.18.4
#1 lore raw

PATCH v3 1/4 microvm: use 3G split unconditionally

In reply to Gerd Hoffmann

Looks like the logic was copied over from q35.

q35 does this for backward compatibility, there is no reason to do this on microvm though. Also microvm doesn't need much mmio space, 1G is more than enough. Using an mmio window smaller than 1G is bad for gigabyte alignment and hugepages though. So split @ 3G unconditionally.

---
 hw/i386/microvm.c | 16 +---------------
 1 file changed, 1 insertion(+), 15 deletions(-)
hw/i386/microvm.c +1 -15
index 937db10ae6a5..44f940813b07 100644
@@ -170,23 +170,9 @@ static void microvm_memory_init(MicrovmMachineState *mms)
     MemoryRegion *ram_below_4g, *ram_above_4g;
     MemoryRegion *system_memory = get_system_memory();
     FWCfgState *fw_cfg;
-    ram_addr_t lowmem;
+    ram_addr_t lowmem = 0xc0000000; /* 3G */
     int i;
 
-    /*
-     * Check whether RAM fits below 4G (leaving 1/2 GByte for IO memory
-     * and 256 Mbytes for PCI Express Enhanced Configuration Access Mapping
-     * also known as MMCFG).
-     * If it doesn't, we need to split it in chunks below and above 4G.
-     * In any case, try to make sure that guest addresses aligned at
-     * 1G boundaries get mapped to host addresses aligned at 1G boundaries.
-     */
-    if (machine->ram_size >= 0xb0000000) {
-        lowmem = 0x80000000;
-    } else {
-        lowmem = 0xb0000000;
-    }
-
     /*
      * Handle the machine opt max-ram-below-4g.  It is basically doing
      * min(qemu limit, user limit).
Signature · 1 line
2.18.4
#2 lore raw

PATCH v3 2/4 microvm: drop max-ram-below-4g support

In reply to Gerd Hoffmann

Not useful for microvm and allows users to shoot themself into the foot (make ram + mmio overlap).

---
 hw/i386/microvm.c | 19 -------------------
 1 file changed, 19 deletions(-)
hw/i386/microvm.c +0 -19
index 44f940813b07..5e931975a06d 100644
@@ -173,25 +173,6 @@ static void microvm_memory_init(MicrovmMachineState *mms)
     ram_addr_t lowmem = 0xc0000000; /* 3G */
     int i;
 
-    /*
-     * Handle the machine opt max-ram-below-4g.  It is basically doing
-     * min(qemu limit, user limit).
-     */
-    if (!x86ms->max_ram_below_4g) {
-        x86ms->max_ram_below_4g = 4 * GiB;
-    }
-    if (lowmem > x86ms->max_ram_below_4g) {
-        lowmem = x86ms->max_ram_below_4g;
-        if (machine->ram_size - lowmem > lowmem &&
-            lowmem & (1 * GiB - 1)) {
-            warn_report("There is possibly poor performance as the ram size "
-                        " (0x%" PRIx64 ") is more then twice the size of"
-                        " max-ram-below-4g (%"PRIu64") and"
-                        " max-ram-below-4g is not a multiple of 1G.",
-                        (uint64_t)machine->ram_size, x86ms->max_ram_below_4g);
-        }
-    }
-
     if (machine->ram_size > lowmem) {
         x86ms->above_4g_mem_size = machine->ram_size - lowmem;
         x86ms->below_4g_mem_size = lowmem;
Signature · 1 line
2.18.4
#0 lore raw

v3 cover microvm: memory config tweaks

With more microvm memory config tweaks split this into its owns series, the microvm acpi patch series is already big enough ...

v2:
- use 3G split.
- add patch to move virtio-mmio region.
- pick up acks & reviews.
v3:
- fix xen build.
- pick up acks & reviews.

take care,
Gerd

Gerd Hoffmann (4):
microvm: use 3G split unconditionally
microvm: drop max-ram-below-4g support
x86: move max-ram-below-4g to pc
microvm: move virtio base to 0xfeb00000

 include/hw/i386/microvm.h |  2 +-
 include/hw/i386/pc.h      |  2 ++
 include/hw/i386/x86.h     |  4 ----
 hw/i386/microvm.c         | 35 +----------------------------
 hw/i386/pc.c              | 46 +++++++++++++++++++++++++++++++++++++++
 hw/i386/pc_piix.c         | 10 ++++-----
 hw/i386/pc_q35.c          | 10 ++++-----
 hw/i386/x86.c             | 46 ---------------------------------------
 hw/i386/xen/xen-hvm.c     |  2 +-
 9 files changed, 61 insertions(+), 96 deletions(-)
Signature · 1 line
2.18.4
Reviewed-by on v3 3/4
#4 lore raw

RE: [PATCH v3 3/4] x86: move max-ram-below-4g to pc

In reply to Gerd Hoffmann
Quoted 11 lines

-----Original Message-----
From: Gerd Hoffmann <[email protected]>
Sent: 29 May 2020 08:40
To: [email protected]
Cc: Paolo Bonzini <[email protected]>; Eduardo Habkost <[email protected]>; Sergio Lopez <[email protected]>; [email protected]; Marcel Apfelbaum <[email protected]>; Stefano Stabellini <[email protected]>; Paul Durrant <[email protected]>; [email protected]; Michael S. Tsirkin <[email protected]>; Anthony Perard <[email protected]>; Richard Henderson <[email protected]>; [email protected]; Gerd Hoffmann <[email protected]>
Subject: [PATCH v3 3/4] x86: move max-ram-below-4g to pc

Quoted 6 lines

Move from X86MachineClass to PCMachineClass so it disappears from microvm machine type property list.

Xen change...

Quoted 266 lines
---
 include/hw/i386/pc.h  |  2 ++
 include/hw/i386/x86.h |  4 ----
 hw/i386/pc.c          | 46 +++++++++++++++++++++++++++++++++++++++++++
 hw/i386/pc_piix.c     | 10 +++++-----
 hw/i386/pc_q35.c      | 10 +++++-----
 hw/i386/x86.c         | 46 -------------------------------------------
 hw/i386/xen/xen-hvm.c |  2 +-
 7 files changed, 59 insertions(+), 61 deletions(-)
include/hw/i386/pc.h +2 -0
index 5e3b19ab78fc..dce1273c7dad 100644
@@ -35,6 +35,7 @@ struct PCMachineState {
     PFlashCFI01 *flash[2];
 
     /* Configuration options: */
+    uint64_t max_ram_below_4g;
     OnOffAuto vmport;
 
     bool acpi_build_enabled;
@@ -51,6 +52,7 @@ struct PCMachineState {
 };
 
 #define PC_MACHINE_ACPI_DEVICE_PROP "acpi-device"
+#define PC_MACHINE_MAX_RAM_BELOW_4G "max-ram-below-4g"
 #define PC_MACHINE_DEVMEM_REGION_SIZE "device-memory-region-size"
 #define PC_MACHINE_VMPORT           "vmport"
 #define PC_MACHINE_SMBUS            "smbus"
include/hw/i386/x86.h +0 -4
index b52285481687..b79f24e28545 100644
@@ -51,9 +51,6 @@ typedef struct {
     qemu_irq *gsi;
     GMappedFile *initrd_mapped_file;
 
-    /* Configuration options: */
-    uint64_t max_ram_below_4g;
-
     /* RAM information (sizes, addresses, configuration): */
     ram_addr_t below_4g_mem_size, above_4g_mem_size;
 
@@ -82,7 +79,6 @@ typedef struct {
     AddressSpace *ioapic_as;
 } X86MachineState;
 
-#define X86_MACHINE_MAX_RAM_BELOW_4G "max-ram-below-4g"
 #define X86_MACHINE_SMM              "smm"
 #define X86_MACHINE_ACPI             "acpi"
 
hw/i386/pc.c +46 -0
index c5db7be6d8b1..6d6f6decb32c 100644
@@ -1831,6 +1831,45 @@ static void pc_machine_set_pit(Object *obj, bool value, Error **errp)
     pcms->pit_enabled = value;
 }
 
+static void pc_machine_get_max_ram_below_4g(Object *obj, Visitor *v,
+                                            const char *name, void *opaque,
+                                            Error **errp)
+{
+    PCMachineState *pcms = PC_MACHINE(obj);
+    uint64_t value = pcms->max_ram_below_4g;
+
+    visit_type_size(v, name, &value, errp);
+}
+
+static void pc_machine_set_max_ram_below_4g(Object *obj, Visitor *v,
+                                            const char *name, void *opaque,
+                                            Error **errp)
+{
+    PCMachineState *pcms = PC_MACHINE(obj);
+    Error *error = NULL;
+    uint64_t value;
+
+    visit_type_size(v, name, &value, &error);
+    if (error) {
+        error_propagate(errp, error);
+        return;
+    }
+    if (value > 4 * GiB) {
+        error_setg(&error,
+                   "Machine option 'max-ram-below-4g=%"PRIu64
+                   "' expects size less than or equal to 4G", value);
+        error_propagate(errp, error);
+        return;
+    }
+
+    if (value < 1 * MiB) {
+        warn_report("Only %" PRIu64 " bytes of RAM below the 4GiB boundary,"
+                    "BIOS may not work with less than 1MiB", value);
+    }
+
+    pcms->max_ram_below_4g = value;
+}
+
 static void pc_machine_initfn(Object *obj)
 {
     PCMachineState *pcms = PC_MACHINE(obj);
@@ -1840,6 +1879,7 @@ static void pc_machine_initfn(Object *obj)
 #else
     pcms->vmport = ON_OFF_AUTO_OFF;
 #endif /* CONFIG_VMPORT */
+    pcms->max_ram_below_4g = 0; /* use default */
     /* acpi build is enabled by default if machine supports it */
     pcms->acpi_build_enabled = PC_MACHINE_GET_CLASS(pcms)->has_acpi_build;
     pcms->smbus_enabled = true;
@@ -1938,6 +1978,12 @@ static void pc_machine_class_init(ObjectClass *oc, void *data)
     mc->numa_mem_supported = true;
     mc->default_ram_id = "pc.ram";
 
+    object_class_property_add(oc, PC_MACHINE_MAX_RAM_BELOW_4G, "size",
+        pc_machine_get_max_ram_below_4g, pc_machine_set_max_ram_below_4g,
+        NULL, NULL);
+    object_class_property_set_description(oc, PC_MACHINE_MAX_RAM_BELOW_4G,
+        "Maximum ram below the 4G boundary (32bit boundary)");
+
     object_class_property_add(oc, PC_MACHINE_DEVMEM_REGION_SIZE, "int",
         pc_machine_get_device_memory_region_size, NULL,
         NULL, NULL);
hw/i386/pc_piix.c +5 -5
index f66e1d73ce0b..503c35f7bf4c 100644
@@ -127,11 +127,11 @@ static void pc_init1(MachineState *machine,
     if (xen_enabled()) {
         xen_hvm_init(pcms, &ram_memory);
     } else {
-        if (!x86ms->max_ram_below_4g) {
-            x86ms->max_ram_below_4g = 0xe0000000; /* default: 3.5G */
+        if (!pcms->max_ram_below_4g) {
+            pcms->max_ram_below_4g = 0xe0000000; /* default: 3.5G */
         }
-        lowmem = x86ms->max_ram_below_4g;
-        if (machine->ram_size >= x86ms->max_ram_below_4g) {
+        lowmem = pcms->max_ram_below_4g;
+        if (machine->ram_size >= pcms->max_ram_below_4g) {
             if (pcmc->gigabyte_align) {
                 if (lowmem > 0xc0000000) {
                     lowmem = 0xc0000000;
@@ -140,7 +140,7 @@ static void pc_init1(MachineState *machine,
                     warn_report("Large machine and max_ram_below_4g "
                                 "(%" PRIu64 ") not a multiple of 1G; "
                                 "possible bad performance.",
-                                x86ms->max_ram_below_4g);
+                                pcms->max_ram_below_4g);
                 }
             }
         }
hw/i386/pc_q35.c +5 -5
index 4ba8ac8774e4..90e8fb2cb737 100644
@@ -154,18 +154,18 @@ static void pc_q35_init(MachineState *machine)
     /* Handle the machine opt max-ram-below-4g.  It is basically doing
      * min(qemu limit, user limit).
      */
-    if (!x86ms->max_ram_below_4g) {
-        x86ms->max_ram_below_4g = 4 * GiB;
+    if (!pcms->max_ram_below_4g) {
+        pcms->max_ram_below_4g = 4 * GiB;
     }
-    if (lowmem > x86ms->max_ram_below_4g) {
-        lowmem = x86ms->max_ram_below_4g;
+    if (lowmem > pcms->max_ram_below_4g) {
+        lowmem = pcms->max_ram_below_4g;
         if (machine->ram_size - lowmem > lowmem &&
             lowmem & (1 * GiB - 1)) {
             warn_report("There is possibly poor performance as the ram size "
                         " (0x%" PRIx64 ") is more then twice the size of"
                         " max-ram-below-4g (%"PRIu64") and"
                         " max-ram-below-4g is not a multiple of 1G.",
-                        (uint64_t)machine->ram_size, x86ms->max_ram_below_4g);
+                        (uint64_t)machine->ram_size, pcms->max_ram_below_4g);
         }
     }
 
hw/i386/x86.c +0 -46
index 7a3bc7ab6639..49884e5c1597 100644
@@ -846,45 +846,6 @@ void x86_bios_rom_init(MemoryRegion *rom_memory, bool isapc_ram_fw)
                                 bios);
 }
 
-static void x86_machine_get_max_ram_below_4g(Object *obj, Visitor *v,
-                                             const char *name, void *opaque,
-                                             Error **errp)
-{
-    X86MachineState *x86ms = X86_MACHINE(obj);
-    uint64_t value = x86ms->max_ram_below_4g;
-
-    visit_type_size(v, name, &value, errp);
-}
-
-static void x86_machine_set_max_ram_below_4g(Object *obj, Visitor *v,
-                                             const char *name, void *opaque,
-                                             Error **errp)
-{
-    X86MachineState *x86ms = X86_MACHINE(obj);
-    Error *error = NULL;
-    uint64_t value;
-
-    visit_type_size(v, name, &value, &error);
-    if (error) {
-        error_propagate(errp, error);
-        return;
-    }
-    if (value > 4 * GiB) {
-        error_setg(&error,
-                   "Machine option 'max-ram-below-4g=%"PRIu64
-                   "' expects size less than or equal to 4G", value);
-        error_propagate(errp, error);
-        return;
-    }
-
-    if (value < 1 * MiB) {
-        warn_report("Only %" PRIu64 " bytes of RAM below the 4GiB boundary,"
-                    "BIOS may not work with less than 1MiB", value);
-    }
-
-    x86ms->max_ram_below_4g = value;
-}
-
 bool x86_machine_is_smm_enabled(X86MachineState *x86ms)
 {
     bool smm_available = false;
@@ -958,7 +919,6 @@ static void x86_machine_initfn(Object *obj)
 
     x86ms->smm = ON_OFF_AUTO_AUTO;
     x86ms->acpi = ON_OFF_AUTO_AUTO;
-    x86ms->max_ram_below_4g = 0; /* use default */
     x86ms->smp_dies = 1;
 
     x86ms->apicid_from_cpu_idx = x86_apicid_from_cpu_idx;
@@ -980,12 +940,6 @@ static void x86_machine_class_init(ObjectClass *oc, void *data)
     x86mc->save_tsc_khz = true;
     nc->nmi_monitor_handler = x86_nmi;
 
-    object_class_property_add(oc, X86_MACHINE_MAX_RAM_BELOW_4G, "size",
-        x86_machine_get_max_ram_below_4g, x86_machine_set_max_ram_below_4g,
-        NULL, NULL);
-    object_class_property_set_description(oc, X86_MACHINE_MAX_RAM_BELOW_4G,
-        "Maximum ram below the 4G boundary (32bit boundary)");
-
     object_class_property_add(oc, X86_MACHINE_SMM, "OnOffAuto",
         x86_machine_get_smm, x86_machine_set_smm,
         NULL, NULL);
hw/i386/xen/xen-hvm.c +1 -2
index 82ece6b9e739..d6f4674418e9 100644
@@ -203,7 +203,7 @@ static void xen_ram_init(PCMachineState *pcms,
     ram_addr_t block_len;
     uint64_t user_lowmem =
         object_property_get_uint(qdev_get_machine(),
-                                 X86_MACHINE_MAX_RAM_BELOW_4G,
+                                 PC_MACHINE_MAX_RAM_BELOW_4G,
                                  &error_abort);
 
     /* Handle the machine opt max-ram-below-4g.  It is basically doing
--

2.18.4

Reviewed-by on the v3 series
#7 lore raw
In reply to Gerd Hoffmann
Quoted 2 lines · Gerd Hoffmann

With more microvm memory config tweaks split this into its owns series, the microvm acpi patch series is already big enough ...

Okay.

We might want to add pci to microvm and maybe we'll need more space then, but let's leave this for another day.

Quoted 30 lines

v2:
- use 3G split.
- add patch to move virtio-mmio region.
- pick up acks & reviews.
v3:
- fix xen build.
- pick up acks & reviews.

take care,
Gerd

Gerd Hoffmann (4):
microvm: use 3G split unconditionally
microvm: drop max-ram-below-4g support
x86: move max-ram-below-4g to pc
microvm: move virtio base to 0xfeb00000

 include/hw/i386/microvm.h |  2 +-
 include/hw/i386/pc.h      |  2 ++
 include/hw/i386/x86.h     |  4 ----
 hw/i386/microvm.c         | 35 +----------------------------
 hw/i386/pc.c              | 46 +++++++++++++++++++++++++++++++++++++++
 hw/i386/pc_piix.c         | 10 ++++-----
 hw/i386/pc_q35.c          | 10 ++++-----
 hw/i386/x86.c             | 46 ---------------------------------------
 hw/i386/xen/xen-hvm.c     |  2 +-
 9 files changed, 61 insertions(+), 96 deletions(-)
Signature · 1 line
2.18.4
#8 lore raw
In reply to Gerd Hoffmann
Quoted 11 lines · Gerd Hoffmann

With more microvm memory config tweaks split this into its owns series, the microvm acpi patch series is already big enough ...

v2:
- use 3G split.
- add patch to move virtio-mmio region.
- pick up acks & reviews.
v3:
- fix xen build.
- pick up acks & reviews.

Quoted 2 lines

take care,
Gerd

Ping. Anyone going to pick this up? MAINTAINERS lists Sergio+Paolo ... Or should I send a pull req myself?

take care,
Gerd

Acked-by on the v3 series
#10 lore raw
In reply to Gerd Hoffmann
Quoted 2 lines · Gerd Hoffmann

With more microvm memory config tweaks split this into its owns series, the microvm acpi patch series is already big enough ...

Looks sane:

microvm things so should use that tree ...

Quoted 30 lines

v2:
- use 3G split.
- add patch to move virtio-mmio region.
- pick up acks & reviews.
v3:
- fix xen build.
- pick up acks & reviews.

take care,
Gerd

Gerd Hoffmann (4):
microvm: use 3G split unconditionally
microvm: drop max-ram-below-4g support
x86: move max-ram-below-4g to pc
microvm: move virtio base to 0xfeb00000

 include/hw/i386/microvm.h |  2 +-
 include/hw/i386/pc.h      |  2 ++
 include/hw/i386/x86.h     |  4 ----
 hw/i386/microvm.c         | 35 +----------------------------
 hw/i386/pc.c              | 46 +++++++++++++++++++++++++++++++++++++++
 hw/i386/pc_piix.c         | 10 ++++-----
 hw/i386/pc_q35.c          | 10 ++++-----
 hw/i386/x86.c             | 46 ---------------------------------------
 hw/i386/xen/xen-hvm.c     |  2 +-
 9 files changed, 61 insertions(+), 96 deletions(-)
Signature · 1 line
2.18.4
Reviewed-by on v3 4/4
#6 lore raw

Re: [PATCH v3 4/4] microvm: move virtio base to 0xfeb00000

In reply to Gerd Hoffmann
Quoted 13 lines · Gerd Hoffmann

Place virtio-mmio devices near the other mmio regions, next ioapic is at @ 0xfec00000.

---
 include/hw/i386/microvm.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/hw/i386/microvm.h +0 -0
index ba68d1f22bb3..fd34b78e0d2a 100644

include/hw/i386/microvm.h line 32

Quoted 8 lines
include/hw/i386/microvm.h +1 -1
@@ -26,7 +26,7 @@
 #include "hw/i386/x86.h"
 
 /* Platform virtio definitions */
-#define VIRTIO_MMIO_BASE      0xc0000000
+#define VIRTIO_MMIO_BASE      0xfeb00000
 #define VIRTIO_IRQ_BASE       5
 #define VIRTIO_NUM_TRANSPORTS 8
 #define VIRTIO_CMDLINE_MAXLEN 64

OK, and let's hope we don't need to move it again.

Quoted 2 lines
Signature · 1 line
2.18.4
#9 lore raw
In reply to Gerd Hoffmann
Quoted 2 lines · Gerd Hoffmann

Ping. Anyone going to pick this up? MAINTAINERS lists Sergio+Paolo ... Or should I send a pull req myself?

Hmm, no reply. I guess that means "send a pull req" ...

take care,
Gerd