Skip to contentSkip to conversation

hinic: add set_channels ethtool_ops support

PATCH Superseded Luo bin 2 participants 2 messages May 30, 2020 – May 31, 2020

Subsystems (3)

v3 of 6 Superseded Latest is v6 →

lore
Share & tools
lore

Luo bin

author
#0 lore raw

PATCH v3 1/1 hinic: add set_channels ethtool_ops support

add support to change TX/RX queue number with ethtool -L ethx combined

---
 .../net/ethernet/huawei/hinic/hinic_ethtool.c | 40 +++++++++++++++----
 .../net/ethernet/huawei/hinic/hinic_main.c    |  2 +-
 drivers/net/ethernet/huawei/hinic/hinic_tx.c  |  5 +++
 3 files changed, 38 insertions(+), 9 deletions(-)
drivers/net/ethernet/huawei/hinic/hinic_ethtool.c +32 -8
index ace18d258049..efb02e03e7da 100644
@@ -619,14 +619,37 @@ static void hinic_get_channels(struct net_device *netdev,
 	struct hinic_dev *nic_dev = netdev_priv(netdev);
 	struct hinic_hwdev *hwdev = nic_dev->hwdev;
 
-	channels->max_rx = hwdev->nic_cap.max_qps;
-	channels->max_tx = hwdev->nic_cap.max_qps;
-	channels->max_other = 0;
-	channels->max_combined = 0;
-	channels->rx_count = hinic_hwdev_num_qps(hwdev);
-	channels->tx_count = hinic_hwdev_num_qps(hwdev);
-	channels->other_count = 0;
-	channels->combined_count = 0;
+	channels->max_combined = nic_dev->max_qps;
+	channels->combined_count = hinic_hwdev_num_qps(hwdev);
+}
+
+static int hinic_set_channels(struct net_device *netdev,
+			      struct ethtool_channels *channels)
+{
+	struct hinic_dev *nic_dev = netdev_priv(netdev);
+	unsigned int count = channels->combined_count;
+	int err;
+
+	netif_info(nic_dev, drv, netdev, "Set max combined queue number from %d to %d\n",
+		   hinic_hwdev_num_qps(nic_dev->hwdev), count);
+
+	if (netif_running(netdev)) {
+		netif_info(nic_dev, drv, netdev, "Restarting netdev\n");
+		hinic_close(netdev);
+
+		nic_dev->hwdev->nic_cap.num_qps = count;
+
+		err = hinic_open(netdev);
+		if (err) {
+			netif_err(nic_dev, drv, netdev,
+				  "Failed to open netdev\n");
+			return -EFAULT;
+		}
+	} else {
+		nic_dev->hwdev->nic_cap.num_qps = count;
+	}
+
+	return 0;
 }
 
 static int hinic_get_rss_hash_opts(struct hinic_dev *nic_dev,
@@ -1219,6 +1242,7 @@ static const struct ethtool_ops hinic_ethtool_ops = {
 	.get_ringparam = hinic_get_ringparam,
 	.set_ringparam = hinic_set_ringparam,
 	.get_channels = hinic_get_channels,
+	.set_channels = hinic_set_channels,
 	.get_rxnfc = hinic_get_rxnfc,
 	.set_rxnfc = hinic_set_rxnfc,
 	.get_rxfh_key_size = hinic_get_rxfh_key_size,
drivers/net/ethernet/huawei/hinic/hinic_main.c +1 -1
index c8ab129a7ae8..e9e6f4c9309a 100644
@@ -326,7 +326,6 @@ static void hinic_enable_rss(struct hinic_dev *nic_dev)
 	int i, node, err = 0;
 	u16 num_cpus = 0;
 
-	nic_dev->max_qps = hinic_hwdev_max_num_qps(hwdev);
 	if (nic_dev->max_qps <= 1) {
 		nic_dev->flags &= ~HINIC_RSS_ENABLE;
 		nic_dev->rss_limit = nic_dev->max_qps;
@@ -1031,6 +1030,7 @@ static int nic_dev_init(struct pci_dev *pdev)
 	nic_dev->rq_depth = HINIC_RQ_DEPTH;
 	nic_dev->sriov_info.hwdev = hwdev;
 	nic_dev->sriov_info.pdev = pdev;
+	nic_dev->max_qps = num_qps;
 
 	sema_init(&nic_dev->mgmt_lock, 1);
 
drivers/net/ethernet/huawei/hinic/hinic_tx.c +5 -0
index 4c66a0bc1b28..6da761d7a6ef 100644
@@ -470,6 +470,11 @@ netdev_tx_t hinic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	struct hinic_txq *txq;
 	struct hinic_qp *qp;
 
+	if (unlikely(!netif_carrier_ok(netdev))) {
+		dev_kfree_skb_any(skb);
+		return NETDEV_TX_OK;
+	}
+
 	txq = &nic_dev->txqs[q_id];
 	qp = container_of(txq->sq, struct hinic_qp, sq);
 
Signature · 1 line
2.17.1
maintainer
#1 lore raw

From: Luo bin <[email protected]>
Date: Fri, 29 May 2020 18:11:50 +0000

Quoted 3 lines

add support to change TX/RX queue number with ethtool -L ethx combined

Luo, I am not applying any of your patches until you fix the time on your computer.

This causes a lot of issues and slows down my workflow because it causes your patch submissions to be placed deep in my patchwork backlog because patchwork entries is ordered by date.

Therefore, please fix the date on your computer and resubmit your changes.

Thank you.