Skip to contentSkip to conversation

test-appliance: exclude ext4/023 and ext4/028 from encrypt config

PATCH Applied Eric Biggers 2 participants 2 messages Jun 3, 2020 – Jun 12, 2020 fscrypt: file system level encryption support

lore
Share & tools
lore

Eric Biggers

author maintainer
#0 lore raw

PATCH 1/1 test-appliance: exclude ext4/023 and ext4/028 from encrypt config

From: Eric Biggers <[email protected]>

In Linux 5.8, the test_dummy_encryption mount option will use v2 encryption policies rather than v1 as it previously did. This increases the size of the encryption xattr slightly, causing two ext4 tests to start failing due to xattr spillover. Exclude these tests.

See kernel commit ed318a6cc0b6 ("fscrypt: support
test_dummy_encryption=v2") for more details.

---
 .../files/root/fs/ext4/cfg/encrypt.exclude          |  2 ++
 .../files/root/fs/ext4/cfg/encrypt_1k.exclude       | 13 +++++++------
 2 files changed, 9 insertions(+), 6 deletions(-)
kvm-xfstests/test-appliance/files/root/fs/ext4/cfg/encrypt.exclude +2 -0
index 304201e..47c26e7 100644
@@ -5,7 +5,9 @@ ext4/004	# dump/restore doesn't handle quotas
 # xattr size.  This causes problems with encryption
 # which requires its own xattrs which take space.
 ext4/022
+ext4/023
 ext4/026
+ext4/028
 
 # file systems with encryption enabled can't be mounted with ext3
 ext4/044
kvm-xfstests/test-appliance/files/root/fs/ext4/cfg/encrypt_1k.exclude +7 -6
index e31c371..cd60151 100644
@@ -1,8 +1,15 @@
 # These tests are also excluded in encrypt.exclude.
 # See there for the reasons.
+#
+# Due to the 1k block size, ext4/023 and ext4/028 also fail for a second reason:
+# they use _scratch_populate_cached() which tries to create a 1023-byte symlink,
+# which fails with encrypt_1k because encrypted symlinks are limited to
+# blocksize-3 bytes, not blocksize-1 as is the case for no encryption.
 ext4/004
 ext4/022
+ext4/023
 ext4/026
+ext4/028
 generic/082
 generic/219
 generic/230
@@ -19,9 +26,3 @@ generic/204
 ext4/034
 generic/273
 generic/454
-
-# These tests use _scratch_populate_cached() which tries to create a 1023-byte
-# symlink, which fails with encrypt_1k because encrypted symlinks are limited to
-# blocksize-3 bytes, not blocksize-1 as is the case for no encryption.
-ext4/023
-ext4/028
Signature · 1 line
2.26.2
maintainer Applied
#1 lore raw
Quoted 11 lines · Eric Biggers

From: Eric Biggers <[email protected]>

In Linux 5.8, the test_dummy_encryption mount option will use v2 encryption policies rather than v1 as it previously did. This increases the size of the encryption xattr slightly, causing two ext4 tests to start failing due to xattr spillover. Exclude these tests.

See kernel commit ed318a6cc0b6 ("fscrypt: support
test_dummy_encryption=v2") for more details.

Thanks, applied.

- Ted