Revert "vim: do not adjust script paths building for target"
PATCH 1/1 Revert "vim: do not adjust script paths building for target"
This reverts commit 8972fe5581b9fe8ef14d539001758bb13bca6737.
The above commit causes regression when vim-tools is installed. The error is like below.
Error:
Problem: conflicting requests
- nothing provides /bin/csh needed by vim-tools-8.2-r0.corei7_64
- nothing provides /usr/bin/nawk needed by vim-tools-8.2-r0.corei7_64
- nothing provides /usr/bin/python needed by vim-tools-8.2-r0.corei7_64
--- .../vim/files/no-path-adjust.patch | 27 ------------------- meta/recipes-support/vim/vim.inc | 12 ++++----- 2 files changed, 6 insertions(+), 33 deletions(-) delete mode 100644 meta/recipes-support/vim/files/no-path-adjust.patch
meta/recipes-support/vim/files/no-path-adjust.patch deleted +0 -27
@@ -1,27 +0,0 @@ -vim: do not adjust script pathnames - -When cross-compiling, we do not want to reference the host versions of -things like perl and awk. - -Upstream-Status: Pending - -Signed-off-by: Joe Slater <[email protected]> - ---- a/src/Makefile -+++ b/src/Makefile -@@ -2507,11 +2507,14 @@ installtools: $(TOOLS) $(DESTDIR)$(exec_ - rm -rf $$cvs; \ - fi - -chmod $(FILEMOD) $(DEST_TOOLS)/* --# replace the path in some tools -+ -+# replace the path in some tools, but not when cross-compiling -+ifneq ($(CROSS_COMPILING),1) - perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl - awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ - awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ - awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi -+endif - -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*` - - # install the language specific files for tools, if they were unpacked
meta/recipes-support/vim/vim.inc +6 -6
@@ -11,7 +11,6 @@ SRC_URI = "git://github.com/vim/vim.git \ file://disable_acl_header_check.patch \ file://vim-add-knob-whether-elf.h-are-checked.patch \ file://0001-src-Makefile-improve-reproducibility.patch \ - file://no-path-adjust.patch \ " SRCREV = "98056533b96b6b5d8849641de93185dd7bcadc44"
@@ -83,6 +82,12 @@ EXTRA_OECONF = " \ do_install() { autotools_do_install + # Work around file-rdeps picking up csh, awk, perl or python as a dep + chmod -x ${D}${datadir}/${BPN}/${VIMDIR}/tools/vim132 + chmod -x ${D}${datadir}/${BPN}/${VIMDIR}/tools/mve.awk + chmod -x ${D}${datadir}/${BPN}/${VIMDIR}/tools/*.pl + chmod -x ${D}${datadir}/${BPN}/${VIMDIR}/tools/*.py + # Install example vimrc from runtime files install -m 0644 runtime/vimrc_example.vim ${D}/${datadir}/${BPN}/vimrc
@@ -105,12 +110,7 @@ FILES_${PN}-help = "${datadir}/${BPN}/${VIMDIR}/doc" FILES_${PN}-tutor = "${datadir}/${BPN}/${VIMDIR}/tutor ${bindir}/${BPN}tutor" FILES_${PN}-vimrc = "${datadir}/${BPN}/vimrc" FILES_${PN}-data = "${datadir}/${BPN}" - -# We do not want to complain if perl or gawk are not on the target. -# FILES_${PN}-tools = "${datadir}/${BPN}/${VIMDIR}/tools" -INSANE_SKIP_${PN}-tools = "file-rdeps" - FILES_${PN}-common = " \ ${datadir}/${BPN}/${VIMDIR}/*.vim \ ${datadir}/${BPN}/${VIMDIR}/autoload \
Signature · 1 line
2.17.1
Quoted 41 lines · Chen Qi
This reverts commit
8972fe5581b9fe8ef14d539001758bb13bca6737.The above commit causes regression when vim-tools is installed. The error is like below.
Error:
Problem: conflicting requests
- nothing provides/bin/cshneeded by vim-tools-8.2-r0.corei7_64
- nothing provides/usr/bin/nawkneeded by vim-tools-8.2-r0.corei7_64
- nothing provides/usr/bin/pythonneeded by vim-tools-8.2-r0.corei7_64Signed-off-by Chen Qi <[email protected]>--- .../vim/files/no-path-adjust.patch | 27 ------------------- meta/recipes-support/vim/vim.inc | 12 ++++----- 2 files changed, 6 insertions(+), 33 deletions(-) delete mode 100644 meta/recipes-support/vim/files/no-path-adjust.patchmeta/recipes-support/vim/files/no-path-adjust.patch deleted +0
-17@@ -1,27 +0,0 @@ -vim: do not adjust script pathnames - -When cross-compiling, we do not want to reference the host versions of -things like perl and awk. - -Upstream-Status: Pending - -Signed-off-by: Joe Slater <[email protected]> - ---- a/src/Makefile -+++ b/src/Makefile -@@ -2507,11 +2507,14 @@ installtools: $(TOOLS) $(DESTDIR)$(exec_ - rm -rf $$cvs; \ - fi - -chmod $(FILEMOD) $(DEST_TOOLS)/* --# replace the path in some tools -+
meta/recipes-support/vim/files/no-path-adjust.patch line 27
Quoted 10 lines
meta/recipes-support/vim/files/no-path-adjust.patch deleted +0
-10-+# replace the path in some tools, but not when cross-compiling -+ifneq ($(CROSS_COMPILING),1) - perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl - awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ - awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ - awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi -+endif - -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*` - - # install the language specific files for tools, if they were unpacked
If we're going to install these files which you're still doing, we want to use target paths, not host ones?
I suspect we therefore need this and your changes rather than removing this patch?
Cheers,
Richard
Quoted 39 lines
meta/recipes-support/vim/vim.inc +6
-6@@ -11,7 +11,6 @@ SRC_URI = "git://github.com/vim/vim.git \ file://disable_acl_header_check.patch \ file://vim-add-knob-whether-elf.h-are-checked.patch \ file://0001-src-Makefile-improve-reproducibility.patch \ - file://no-path-adjust.patch \ " SRCREV = "98056533b96b6b5d8849641de93185dd7bcadc44"@@ -83,6 +82,12 @@ EXTRA_OECONF = " \ do_install() { autotools_do_install + # Work around file-rdeps picking up csh, awk, perl or python as a dep + chmod -x ${D}${datadir}/${BPN}/${VIMDIR}/tools/vim132 + chmod -x ${D}${datadir}/${BPN}/${VIMDIR}/tools/mve.awk + chmod -x ${D}${datadir}/${BPN}/${VIMDIR}/tools/*.pl + chmod -x ${D}${datadir}/${BPN}/${VIMDIR}/tools/*.py + # Install example vimrc from runtime files install -m 0644 runtime/vimrc_example.vim ${D}/${datadir}/${BPN}/vimrc@@ -105,12 +110,7 @@ FILES_${PN}-help = "${datadir}/${BPN}/${VIMDIR}/doc" FILES_${PN}-tutor = "${datadir}/${BPN}/${VIMDIR}/tutor ${bindir}/${BPN}tutor" FILES_${PN}-vimrc = "${datadir}/${BPN}/vimrc" FILES_${PN}-data = "${datadir}/${BPN}" - -# We do not want to complain if perl or gawk are not on the target. -# FILES_${PN}-tools = "${datadir}/${BPN}/${VIMDIR}/tools" -INSANE_SKIP_${PN}-tools = "file-rdeps" - FILES_${PN}-common = " \ ${datadir}/${BPN}/${VIMDIR}/*.vim \ ${datadir}/${BPN}/${VIMDIR}/autoload \
The INSANE_SKIP is intended to avoid the script dependencies. Perhaps it is of the wrong form or there is now some other sanity check producing the error?
Joe
-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Richard Purdie
Sent: Thursday, June 4, 2020 11:40 PM
To: Chen, Qi <[email protected]>; [email protected]
Subject: Re: [OE-core][PATCH] Revert "vim: do not adjust script paths building for target"
Quoted 53 lines · Chen Qi
This reverts commit
8972fe5581b9fe8ef14d539001758bb13bca6737.The above commit causes regression when vim-tools is installed. The error is like below.
Error:
Problem: conflicting requests
- nothing provides/bin/cshneeded by vim-tools-8.2-r0.corei7_64
- nothing provides/usr/bin/nawkneeded by vim-tools-8.2-r0.corei7_64
- nothing provides/usr/bin/pythonneeded by
vim-tools-8.2-r0.corei7_64Signed-off-by Chen Qi <[email protected]>--- .../vim/files/no-path-adjust.patch | 27 ------------------- meta/recipes-support/vim/vim.inc | 12 ++++----- 2 files changed, 6 insertions(+), 33 deletions(-) delete mode 100644
meta/recipes-support/vim/files/no-path-adjust.patchmeta/recipes-support/vim/files/no-path-adjust.patch deleted +0
-3@@ -1,27 +0,0 @@ -vim: do not adjust script pathnames - -When cross-compiling, we do not want to reference the host versionsof -things like perl and awk.
meta/recipes-support/vim/files/no-path-adjust.patch deleted +0
-23- -Upstream-Status: Pending - -Signed-off-by: Joe Slater <[email protected]> - ---- a/src/Makefile -+++ b/src/Makefile -@@ -2507,11 +2507,14 @@ installtools: $(TOOLS) $(DESTDIR)$(exec_ - rm -rf $$cvs; \ - fi - -chmod $(FILEMOD) $(DEST_TOOLS)/* --# replace the path in some tools -+ -+# replace the path in some tools, but not when cross-compiling ifneq -+($(CROSS_COMPILING),1) - perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl - awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ - awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ - awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi -+endif - -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*` - - # install the language specific files for tools, if they were
Quoted 1 line
unpacked
If we're going to install these files which you're still doing, we want to use target paths, not host ones?
I suspect we therefore need this and your changes rather than removing this patch?
Cheers,
Richard
Quoted 41 lines
meta/recipes-support/vim/vim.inc +6
-1@@ -11,7 +11,6 @@ SRC_URI = "git://github.com/vim/vim.git \ file://disable_acl_header_check.patch \ file://vim-add-knob-whether-elf.h-are-checked.patch \ file://0001-src-Makefile-improve-reproducibility.patch \ - file://no-path-adjust.patch \ " SRCREV = "98056533b96b6b5d8849641de93185dd7bcadc44"@@ -83,6 +82,12 @@ EXTRA_OECONF = " \ do_install() { autotools_do_install + # Work around file-rdeps picking up csh, awk, perl or python as a dep + chmod -x ${D}${datadir}/${BPN}/${VIMDIR}/tools/vim132 + chmod -x ${D}${datadir}/${BPN}/${VIMDIR}/tools/mve.awk + chmod -x ${D}${datadir}/${BPN}/${VIMDIR}/tools/*.pl + chmod -x ${D}${datadir}/${BPN}/${VIMDIR}/tools/*.py + # Install example vimrc from runtime files install -m 0644 runtime/vimrc_example.vim${D}/${datadir}/${BPN}/vimrc
meta/recipes-support/vim/vim.inc +0
-5@@ -105,12 +110,7 @@ FILES_${PN}-help = "${datadir}/${BPN}/${VIMDIR}/doc" FILES_${PN}-tutor = "${datadir}/${BPN}/${VIMDIR}/tutor ${bindir}/${BPN}tutor" FILES_${PN}-vimrc = "${datadir}/${BPN}/vimrc" FILES_${PN}-data = "${datadir}/${BPN}" - -# We do not want to complain if perl or gawk are not on the target. -# FILES_${PN}-tools = "${datadir}/${BPN}/${VIMDIR}/tools" -INSANE_SKIP_${PN}-tools = "file-rdeps" - FILES_${PN}-common = " \ ${datadir}/${BPN}/${VIMDIR}/*.vim \ ${datadir}/${BPN}/${VIMDIR}/autoload \
Quoted 4 lines · Joseph
The
INSANE_SKIPis intended to avoid the script dependencies. Perhaps it is of the wrong form or there is now some other sanity check producing the error?Joe
It solves do_package_qa issue but introduces do_rootfs problem if vim-tools is installed.
The dependencies will calculated anyway at do_rootfs step, and it will report the 'nothing provides xxx' error.
Best Regards,
Chen Qi
Quoted 113 lines
-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Richard Purdie
Sent: Thursday, June 4, 2020 11:40 PM
To: Chen, Qi <[email protected]>; [email protected]
Subject: Re: [OE-core][PATCH] Revert "vim: do not adjust script paths building for target"Quoted 53 lines · Chen Qi
This reverts commit
8972fe5581b9fe8ef14d539001758bb13bca6737.The above commit causes regression when vim-tools is installed. The error is like below.
Error:
Problem: conflicting requests
- nothing provides/bin/cshneeded by vim-tools-8.2-r0.corei7_64
- nothing provides/usr/bin/nawkneeded by vim-tools-8.2-r0.corei7_64
- nothing provides/usr/bin/pythonneeded by
vim-tools-8.2-r0.corei7_64Signed-off-by Chen Qi <[email protected]>--- .../vim/files/no-path-adjust.patch | 27 ------------------- meta/recipes-support/vim/vim.inc | 12 ++++----- 2 files changed, 6 insertions(+), 33 deletions(-) delete mode 100644
meta/recipes-support/vim/files/no-path-adjust.patchmeta/recipes-support/vim/files/no-path-adjust.patch deleted +0
-3@@ -1,27 +0,0 @@ -vim: do not adjust script pathnames - -When cross-compiling, we do not want to reference the host versionsof -things like perl and awk.
meta/recipes-support/vim/files/no-path-adjust.patch deleted +0
-23- -Upstream-Status: Pending - -Signed-off-by: Joe Slater <[email protected]> - ---- a/src/Makefile -+++ b/src/Makefile -@@ -2507,11 +2507,14 @@ installtools: $(TOOLS) $(DESTDIR)$(exec_ - rm -rf $$cvs; \ - fi - -chmod $(FILEMOD) $(DEST_TOOLS)/* --# replace the path in some tools -+ -+# replace the path in some tools, but not when cross-compiling ifneq -+($(CROSS_COMPILING),1) - perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl - awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ - awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ - awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi -+endif - -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*` - - # install the language specific files for tools, if they wereQuoted 1 line
unpacked
If we're going to install these files which you're still doing, we want to use target paths, not host ones?
I suspect we therefore need this and your changes rather than removing this patch?
Cheers,
Richard
Quoted 41 lines
meta/recipes-support/vim/vim.inc +6
-1@@ -11,7 +11,6 @@ SRC_URI = "git://github.com/vim/vim.git \ file://disable_acl_header_check.patch \ file://vim-add-knob-whether-elf.h-are-checked.patch \ file://0001-src-Makefile-improve-reproducibility.patch \ - file://no-path-adjust.patch \ " SRCREV = "98056533b96b6b5d8849641de93185dd7bcadc44"@@ -83,6 +82,12 @@ EXTRA_OECONF = " \ do_install() { autotools_do_install + # Work around file-rdeps picking up csh, awk, perl or python as a dep + chmod -x ${D}${datadir}/${BPN}/${VIMDIR}/tools/vim132 + chmod -x ${D}${datadir}/${BPN}/${VIMDIR}/tools/mve.awk + chmod -x ${D}${datadir}/${BPN}/${VIMDIR}/tools/*.pl + chmod -x ${D}${datadir}/${BPN}/${VIMDIR}/tools/*.py + # Install example vimrc from runtime files install -m 0644 runtime/vimrc_example.vim${D}/${datadir}/${BPN}/vimrc
meta/recipes-support/vim/vim.inc +0
-5@@ -105,12 +110,7 @@ FILES_${PN}-help = "${datadir}/${BPN}/${VIMDIR}/doc" FILES_${PN}-tutor = "${datadir}/${BPN}/${VIMDIR}/tutor ${bindir}/${BPN}tutor" FILES_${PN}-vimrc = "${datadir}/${BPN}/vimrc" FILES_${PN}-data = "${datadir}/${BPN}" - -# We do not want to complain if perl or gawk are not on the target. -# FILES_${PN}-tools = "${datadir}/${BPN}/${VIMDIR}/tools" -INSANE_SKIP_${PN}-tools = "file-rdeps" - FILES_${PN}-common = " \ ${datadir}/${BPN}/${VIMDIR}/*.vim \ ${datadir}/${BPN}/${VIMDIR}/autoload \
Quoted 56 lines · Richard Purdie
Quoted 41 lines · Chen Qi
This reverts commit
8972fe5581b9fe8ef14d539001758bb13bca6737.The above commit causes regression when vim-tools is installed. The error is like below.
Error:
Problem: conflicting requests
- nothing provides/bin/cshneeded by vim-tools-8.2-r0.corei7_64
- nothing provides/usr/bin/nawkneeded by vim-tools-8.2-r0.corei7_64
- nothing provides/usr/bin/pythonneeded by vim-tools-8.2-r0.corei7_64Signed-off-by Chen Qi <[email protected]>--- .../vim/files/no-path-adjust.patch | 27 ------------------- meta/recipes-support/vim/vim.inc | 12 ++++----- 2 files changed, 6 insertions(+), 33 deletions(-)delete mode 100644
meta/recipes-support/vim/files/no-path-adjust.patchmeta/recipes-support/vim/files/no-path-adjust.patch deleted +0
-17@@ -1,27 +0,0 @@ -vim: do not adjust script pathnames - -When cross-compiling, we do not want to reference the host versions of -things like perl and awk. - -Upstream-Status: Pending - -Signed-off-by: Joe Slater <[email protected]> - ---- a/src/Makefile -+++ b/src/Makefile -@@ -2507,11 +2507,14 @@ installtools: $(TOOLS) $(DESTDIR)$(exec_ - rm -rf $$cvs; \ - fi - -chmod $(FILEMOD) $(DEST_TOOLS)/* --# replace the path in some tools -+meta/recipes-support/vim/files/no-path-adjust.patch line 27
Quoted 10 lines
meta/recipes-support/vim/files/no-path-adjust.patch deleted +0
-10-+# replace the path in some tools, but not when cross-compiling -+ifneq ($(CROSS_COMPILING),1) - perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl - awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ - awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ - awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi -+endif - -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*` - - # install the language specific files for tools, if they were unpackedIf we're going to install these files which you're still doing, we want to use target paths, not host ones?
Quoted 6 lines
I suspect we therefore need this and your changes rather than removing this patch?
Cheers,
Richard
Thanks. I've sent out V2.
Regards,
Chen Qi
Quoted 41 lines
Quoted 40 lines
meta/recipes-support/vim/vim.inc +6
-6@@ -11,7 +11,6 @@ SRC_URI = "git://github.com/vim/vim.git \ file://disable_acl_header_check.patch \ file://vim-add-knob-whether-elf.h-are-checked.patch \ file://0001-src-Makefile-improve-reproducibility.patch \ - file://no-path-adjust.patch \ " SRCREV = "98056533b96b6b5d8849641de93185dd7bcadc44"@@ -83,6 +82,12 @@ EXTRA_OECONF = " \ do_install() { autotools_do_install + # Work around file-rdeps picking up csh, awk, perl or python as a dep + chmod -x ${D}${datadir}/${BPN}/${VIMDIR}/tools/vim132 + chmod -x ${D}${datadir}/${BPN}/${VIMDIR}/tools/mve.awk + chmod -x ${D}${datadir}/${BPN}/${VIMDIR}/tools/*.pl + chmod -x ${D}${datadir}/${BPN}/${VIMDIR}/tools/*.py + # Install example vimrc from runtime files install -m 0644 runtime/vimrc_example.vim ${D}/${datadir}/${BPN}/vimrc@@ -105,12 +110,7 @@ FILES_${PN}-help = "${datadir}/${BPN}/${VIMDIR}/doc" FILES_${PN}-tutor = "${datadir}/${BPN}/${VIMDIR}/tutor ${bindir}/${BPN}tutor" FILES_${PN}-vimrc = "${datadir}/${BPN}/vimrc" FILES_${PN}-data = "${datadir}/${BPN}" - -# We do not want to complain if perl or gawk are not on the target. -# FILES_${PN}-tools = "${datadir}/${BPN}/${VIMDIR}/tools" -INSANE_SKIP_${PN}-tools = "file-rdeps" - FILES_${PN}-common = " \ ${datadir}/${BPN}/${VIMDIR}/*.vim \ ${datadir}/${BPN}/${VIMDIR}/autoload \