dma-pool: Fix too large DMA pools on medium systems
Subsystems (2)
PATCH v2 1/1 dma-pool: Fix too large DMA pools on medium systems
On systems with at least 32 MiB, but less than 32 GiB of RAM, the DMA memory pools are much larger than intended (e.g. 2 MiB instead of 128 KiB on a 256 MiB system).
Fix this by correcting the calculation of the number of GiBs of RAM in the system. Invert the order of the min/max operations, to keep on calculating in pages until the last step, which aids readability.
---
v2:
- Improve readability:
- Divide by (SZ_1G / SZ_128K) instead of using a shift,
- Invert min/max order to keep calculating in pages until the last step.
--- kernel/dma/pool.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
kernel/dma/pool.c +3 -4
@@ -175,10 +175,9 @@ static int __init dma_atomic_pool_init(void)* sizes to 128KB per 1GB of memory, min 128KB, max MAX_ORDER-1. */ if (!atomic_pool_size) { - atomic_pool_size =max (totalram_pages () >>PAGE_SHIFT ,1UL ) * -SZ_128K ; - atomic_pool_size =min_t (size_t, atomic_pool_size, -1 << (PAGE_SHIFT +MAX_ORDER -1 )); +unsigned long pages =totalram_pages () / (SZ_1G /SZ_128K ); + pages = min_t(unsigned long, pages, MAX_ORDER_NR_PAGES); + atomic_pool_size =max_t (size_t, pages <<PAGE_SHIFT ,SZ_128K ); }INIT_WORK (&atomic_pool_work, atomic_pool_work_fn);
Signature · 1 line
2.17.1
Quoted 10 lines · Geert Uytterhoeven
On systems with at least 32 MiB, but less than 32 GiB of RAM, the DMA memory pools are much larger than intended (e.g. 2 MiB instead of 128 KiB on a 256 MiB system).
Fix this by correcting the calculation of the number of GiBs of RAM in the system. Invert the order of the min/max operations, to keep on calculating in pages until the last step, which aids readability.
Fixes 1d659236fb43c4d2 ("dma-pool: scale the default DMA coherent pool size with memory capacity")Signed-off-by Geert Uytterhoeven <[email protected]>
This works as well and is much more readable. Thanks Geert!
Christoph Hellwig
AppliedThanks,
applied to the dma-mapping tree for 5.8.
Quoted 11 lines · Geert Uytterhoeven
On systems with at least 32 MiB, but less than 32 GiB of RAM, the DMA memory pools are much larger than intended (e.g. 2 MiB instead of 128 KiB on a 256 MiB system).
Fix this by correcting the calculation of the number of GiBs of RAM in the system. Invert the order of the min/max operations, to keep on calculating in pages until the last step, which aids readability.
Fixes 1d659236fb43c4d2 ("dma-pool: scale the default DMA coherent pool size with memory capacity")Signed-off-by Geert Uytterhoeven <[email protected]>Acked-by David Rientjes <[email protected]>
This patch results in a boot failure in some of my powerpc boot tests, specifically those testing boots from mptsas1068 devices. Error message:
mptsas 0000:00:02.0: enabling device (0000 -> 0002)
mptbase: ioc0: Initiating bringup
ioc0: LSISAS1068 A0: Capabilities={Initiator}
mptbase: ioc0: ERROR - Unable to allocate Reply, Request, Chain Buffers!
mptbase: ioc0: ERROR - didn't initialize properly! (-3)
mptsas: probe of 0000:00:02.0 failed with error -3
Configuration is bamboo:44x/bamboo_defconfig plus various added drivers. Qemu command line is
qemu-system-ppc -kernel vmlinux -M bamboo \
-m 256 -no-reboot -snapshot -device mptsas1068,id=scsi \
-device scsi-hd,bus=scsi.0,drive=d0,wwn=0x5000c50015ea71ac -drive \
file=rootfs.ext2,format=raw,if=none,id=d0 \
--append "panic=-1 slub_debug=FZPUA root=/dev/sda mem=256M console=ttyS0" \
-monitor none -nographiccanyonlands_defconfig with sam460ex machine and otherwise similar command line fails as well.
Reverting this patch fixes the problem.
Guenter
_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
Hi Günter,
Quoted 33 lines · Guenter Roeck
Quoted 11 lines · Geert Uytterhoeven
On systems with at least 32 MiB, but less than 32 GiB of RAM, the DMA memory pools are much larger than intended (e.g. 2 MiB instead of 128 KiB on a 256 MiB system).
Fix this by correcting the calculation of the number of GiBs of RAM in the system. Invert the order of the min/max operations, to keep on calculating in pages until the last step, which aids readability.
Fixes 1d659236fb43c4d2 ("dma-pool: scale the default DMA coherent pool size with memory capacity")Signed-off-by Geert Uytterhoeven <[email protected]>Acked-by David Rientjes <[email protected]>This patch results in a boot failure in some of my powerpc boot tests, specifically those testing boots from mptsas1068 devices. Error message:
mptsas 0000:00:02.0: enabling device (0000 -> 0002)
mptbase: ioc0: Initiating bringup
ioc0: LSISAS1068 A0: Capabilities={Initiator}
mptbase: ioc0: ERROR - Unable to allocate Reply, Request, Chain Buffers!
mptbase: ioc0: ERROR - didn't initialize properly! (-3)
mptsas: probe of 0000:00:02.0 failed with error -3Configuration is bamboo:44x/bamboo_defconfig plus various added drivers. Qemu command line is
qemu-system-ppc -kernel vmlinux -M bamboo \ -m 256 -no-reboot -snapshot -device mptsas1068,id=scsi \ -device scsi-hd,bus=scsi.0,drive=d0,wwn=0x5000c50015ea71ac -drive \ file=rootfs.ext2,format=raw,if=none,id=d0 \ --append "panic=-1 slub_debug=FZPUA root=/dev/sda mem=256M console=ttyS0" \ -monitor none -nographic
Quoted 4 lines
canyonlands_defconfigwith sam460ex machine and otherwise similar command line fails as well.Reverting this patch fixes the problem.
This looks like the minimum value of 128 KiB is not sufficient, and the bug is in the intention of 1d659236fb43c4d2 ("dma-pool: scale the default DMA coherent pool size with memory capacity")? Before, there was a single pool of (fixed) 256 KiB size, now there are up to three coherent pools (DMA, DMA32, and kernel), albeit of smaller size (128 KiB each).
Can you print the requested size in drivers/message/fusion/mptbase.c:PrimeIocFifos()?
Does replacing all SZ_128K by SZ_256K in my patch help? That would waste^H^H^H^H^Hallocate 256 KiB or 512 KiB more, though.
Thanks!
Gr{oetje,eeting}s,
Geert
Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected] In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
Quoted 48 lines · Geert Uytterhoeven
Hi Günter,
Quoted 33 lines · Guenter Roeck
Quoted 11 lines · Geert Uytterhoeven
On systems with at least 32 MiB, but less than 32 GiB of RAM, the DMA memory pools are much larger than intended (e.g. 2 MiB instead of 128 KiB on a 256 MiB system).
Fix this by correcting the calculation of the number of GiBs of RAM in the system. Invert the order of the min/max operations, to keep on calculating in pages until the last step, which aids readability.
Fixes 1d659236fb43c4d2 ("dma-pool: scale the default DMA coherent pool size with memory capacity")Signed-off-by Geert Uytterhoeven <[email protected]>Acked-by David Rientjes <[email protected]>This patch results in a boot failure in some of my powerpc boot tests, specifically those testing boots from mptsas1068 devices. Error message:
mptsas 0000:00:02.0: enabling device (0000 -> 0002)
mptbase: ioc0: Initiating bringup
ioc0: LSISAS1068 A0: Capabilities={Initiator}
mptbase: ioc0: ERROR - Unable to allocate Reply, Request, Chain Buffers!
mptbase: ioc0: ERROR - didn't initialize properly! (-3)
mptsas: probe of 0000:00:02.0 failed with error -3Configuration is bamboo:44x/bamboo_defconfig plus various added drivers. Qemu command line is
qemu-system-ppc -kernel vmlinux -M bamboo \ -m 256 -no-reboot -snapshot -device mptsas1068,id=scsi \ -device scsi-hd,bus=scsi.0,drive=d0,wwn=0x5000c50015ea71ac -drive \ file=rootfs.ext2,format=raw,if=none,id=d0 \ --append "panic=-1 slub_debug=FZPUA root=/dev/sda mem=256M console=ttyS0" \ -monitor none -nographicQuoted 4 lines
canyonlands_defconfigwith sam460ex machine and otherwise similar command line fails as well.Reverting this patch fixes the problem.
This looks like the minimum value of 128 KiB is not sufficient, and the bug is in the intention of
1d659236fb43c4d2("dma-pool: scale the default DMA coherent pool size with memory capacity")? Before, there was a single pool of (fixed) 256 KiB size, now there are up to three coherent pools (DMA, DMA32, and kernel), albeit of smaller size (128 KiB each).
Quoted 2 lines
Can you print the requested size in
drivers/message/fusion/mptbase.c:PrimeIocFifos()?
172928 bytes
Quoted 1 line
Does replacing all
SZ_128KbySZ_256Kin my patch help?
Yes, it does.
Guenter
_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
Quoted 32 lines · Guenter Roeck
Quoted 32 lines
Quoted 20 lines
This patch results in a boot failure in some of my powerpc boot tests, specifically those testing boots from mptsas1068 devices. Error message:
mptsas 0000:00:02.0: enabling device (0000 -> 0002)
mptbase: ioc0: Initiating bringup
ioc0: LSISAS1068 A0: Capabilities={Initiator}
mptbase: ioc0: ERROR - Unable to allocate Reply, Request, Chain Buffers!
mptbase: ioc0: ERROR - didn't initialize properly! (-3)
mptsas: probe of 0000:00:02.0 failed with error -3Configuration is bamboo:44x/bamboo_defconfig plus various added drivers. Qemu command line is
qemu-system-ppc -kernel vmlinux -M bamboo \ -m 256 -no-reboot -snapshot -device mptsas1068,id=scsi \ -device scsi-hd,bus=scsi.0,drive=d0,wwn=0x5000c50015ea71ac -drive \ file=rootfs.ext2,format=raw,if=none,id=d0 \ --append "panic=-1 slub_debug=FZPUA root=/dev/sda mem=256M console=ttyS0" \ -monitor none -nographicQuoted 4 lines
canyonlands_defconfigwith sam460ex machine and otherwise similar command line fails as well.Reverting this patch fixes the problem.
This looks like the minimum value of 128 KiB is not sufficient, and the bug is in the intention of
1d659236fb43c4d2("dma-pool: scale the default DMA coherent pool size with memory capacity")? Before, there was a single pool of (fixed) 256 KiB size, now there are up to three coherent pools (DMA, DMA32, and kernel), albeit of smaller size (128 KiB each).
Quoted 9 lines
Quoted 2 lines
Can you print the requested size in
drivers/message/fusion/mptbase.c:PrimeIocFifos()?172928 bytes
Quoted 1 line
Does replacing all
SZ_128KbySZ_256Kin my patch help?Yes, it does.
The new coherent pools should auto expand when they are close to being depleted but there's no guarantee that it can be done fast enough. Switching the min size to be the previous min size (256KB) seems like the best option and it matches what Documentation/admin-guide/kernel-parameters.txt still stays.
I'll also send a patch to point in the right direction when this happens.
Robin Murphy
reviewerQuoted 39 lines · David Rientjes
Quoted 37 lines · Guenter Roeck
Quoted 32 lines
Quoted 20 lines
This patch results in a boot failure in some of my powerpc boot tests, specifically those testing boots from mptsas1068 devices. Error message:
mptsas 0000:00:02.0: enabling device (0000 -> 0002)
mptbase: ioc0: Initiating bringup
ioc0: LSISAS1068 A0: Capabilities={Initiator}
mptbase: ioc0: ERROR - Unable to allocate Reply, Request, Chain Buffers!
mptbase: ioc0: ERROR - didn't initialize properly! (-3)
mptsas: probe of 0000:00:02.0 failed with error -3Configuration is bamboo:44x/bamboo_defconfig plus various added drivers. Qemu command line is
qemu-system-ppc -kernel vmlinux -M bamboo \ -m 256 -no-reboot -snapshot -device mptsas1068,id=scsi \ -device scsi-hd,bus=scsi.0,drive=d0,wwn=0x5000c50015ea71ac -drive \ file=rootfs.ext2,format=raw,if=none,id=d0 \ --append "panic=-1 slub_debug=FZPUA root=/dev/sda mem=256M console=ttyS0" \ -monitor none -nographicQuoted 4 lines
canyonlands_defconfigwith sam460ex machine and otherwise similar command line fails as well.Reverting this patch fixes the problem.
This looks like the minimum value of 128 KiB is not sufficient, and the bug is in the intention of
1d659236fb43c4d2("dma-pool: scale the default DMA coherent pool size with memory capacity")? Before, there was a single pool of (fixed) 256 KiB size, now there are up to three coherent pools (DMA, DMA32, and kernel), albeit of smaller size (128 KiB each).Quoted 2 lines
Can you print the requested size in
drivers/message/fusion/mptbase.c:PrimeIocFifos()?172928 bytes
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
Does replacing all
SZ_128KbySZ_256Kin my patch help?Yes, it does.
The new coherent pools should auto expand when they are close to being depleted but there's no guarantee that it can be done fast enough.
More to the point, it's never going to help if the pool is empty and one allocation is simply larger than the entire thing ;)
Another angle, though, is to question why this driver is making such a large allocation with GFP_ATOMIC in the first place. At a glance it looks like there's no reason at all other than that it's still using the legacy pci_alloc_consistent() API, since every path to that appears to have CAN_SLEEP passed as its flag - modernising that would arguably be an even better long-term win.
Robin.
Quoted 6 lines
Switching the min size to be the previous min size (256KB) seems like the best option and it matches what
Documentation/admin-guide/kernel-parameters.txtstill stays.I'll also send a patch to point in the right direction when this happens.
Quoted 6 lines · Robin Murphy
Another angle, though, is to question why this driver is making such a large allocation with
GFP_ATOMICin the first place. At a glance it looks like there's no reason at all other than that it's still using the legacypci_alloc_consistent()API, since every path to that appears to haveCAN_SLEEPpassed as its flag - modernising that would arguably be an even better long-term win.
Maybe we can just try that for now? If other problems show up we can still increase the initial pool size later in this cycle.
I'll try to cook up a patch.
Hi Guenter,
can you try the patch below? This just converts the huge allocations in mptbase to use GFP_KERNEL. Christophe (added to Cc) actually has a scripted conversion for the rest that he hasn't posted yet, so I'll aim for the minimal version here.
drivers/message/fusion/mptbase.c +20 -21
@@ -1324,13 +1324,13 @@ mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init)return 0 ;/* fw doesn't need any host buffers */ /* spin till we get enough memory */ -while (host_page_buffer_sz >0 ) { - -if ((ioc->HostPageBuffer =pci_alloc_consistent ( - ioc->pcidev, - host_page_buffer_sz, - &ioc->HostPageBuffer_dma)) !=NULL ) { - +while (host_page_buffer_sz >0 ) { + ioc->HostPageBuffer = +dma_alloc_coherent (&ioc->pcidev->dev, + host_page_buffer_sz, + &ioc->HostPageBuffer_dma, +GFP_KERNEL ); +if (ioc->HostPageBuffer) { dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "host_page_buffer @ %p, dma @ %x, sz=%d bytes\n", ioc->name, ioc->HostPageBuffer,
@@ -2741,8 +2741,8 @@ mpt_adapter_disable(MPT_ADAPTER *ioc) sz = ioc->alloc_sz;dexitprintk (ioc,printk (MYIOC_s_INFO_FMT"free @ %p, sz=%d bytes\n" , ioc->name, ioc->alloc, ioc->alloc_sz)); -pci_free_consistent (ioc->pcidev, sz, - ioc->alloc, ioc->alloc_dma); +dma_free_coherent (&ioc->pcidev->dev, sz, ioc->alloc, + ioc->alloc_dma); ioc->reply_frames =NULL ; ioc->req_frames =NULL ; ioc->alloc =NULL ;
@@ -2751,8 +2751,8 @@ mpt_adapter_disable(MPT_ADAPTER *ioc)if (ioc->sense_buf_pool !=NULL ) { sz = (ioc->req_depth *MPT_SENSE_BUFFER_ALLOC ); -pci_free_consistent (ioc->pcidev, sz, - ioc->sense_buf_pool, ioc->sense_buf_pool_dma); +dma_free_coherent (&ioc->pcidev->dev, sz, ioc->sense_buf_pool, + ioc->sense_buf_pool_dma); ioc->sense_buf_pool =NULL ; ioc->alloc_total -= sz; }
@@ -2802,7 +2802,7 @@ mpt_adapter_disable(MPT_ADAPTER *ioc)"HostPageBuffer free @ %p, sz=%d bytes\n" , ioc->name, ioc->HostPageBuffer, ioc->HostPageBuffer_sz)); -pci_free_consistent (ioc->pcidev, ioc->HostPageBuffer_sz, +dma_free_coherent (&ioc->pcidev->dev, ioc->HostPageBuffer_sz, ioc->HostPageBuffer, ioc->HostPageBuffer_dma); ioc->HostPageBuffer =NULL ; ioc->HostPageBuffer_sz =0 ;
@@ -4497,7 +4497,8 @@ PrimeIocFifos(MPT_ADAPTER *ioc) ioc->name, sz, sz, num_chain)); total_size += sz; - mem =pci_alloc_consistent (ioc->pcidev, total_size, &alloc_dma); + mem =dma_alloc_coherent (&ioc->pcidev->dev, total_size, + &alloc_dma,GFP_KERNEL );if (mem ==NULL ) {printk (MYIOC_s_ERR_FMT"Unable to allocate Reply, Request, Chain Buffers!\n" , ioc->name);
@@ -4574,8 +4575,8 @@ PrimeIocFifos(MPT_ADAPTER *ioc)spin_unlock_irqrestore (&ioc->FreeQlock, flags); sz = (ioc->req_depth *MPT_SENSE_BUFFER_ALLOC ); - ioc->sense_buf_pool = -pci_alloc_consistent (ioc->pcidev, sz, &ioc->sense_buf_pool_dma); + ioc->sense_buf_pool =dma_alloc_coherent (&ioc->pcidev->dev, sz, + &ioc->sense_buf_pool_dma,GFP_KERNEL );if (ioc->sense_buf_pool ==NULL ) {printk (MYIOC_s_ERR_FMT"Unable to allocate Sense Buffers!\n" , ioc->name);
@@ -4613,18 +4614,16 @@ PrimeIocFifos(MPT_ADAPTER *ioc)if (ioc->alloc !=NULL ) { sz = ioc->alloc_sz; -pci_free_consistent (ioc->pcidev, - sz, - ioc->alloc, ioc->alloc_dma); +dma_free_coherent (&ioc->pcidev->dev, sz, ioc->alloc, + ioc->alloc_dma); ioc->reply_frames =NULL ; ioc->req_frames =NULL ; ioc->alloc_total -= sz; }if (ioc->sense_buf_pool !=NULL ) { sz = (ioc->req_depth *MPT_SENSE_BUFFER_ALLOC ); -pci_free_consistent (ioc->pcidev, - sz, - ioc->sense_buf_pool, ioc->sense_buf_pool_dma); +dma_free_coherent (&ioc->pcidev->dev, sz, ioc->sense_buf_pool, + ioc->sense_buf_pool_dma); ioc->sense_buf_pool =NULL ; }
Quoted 7 lines · Christoph Hellwig
Hi Guenter,
can you try the patch below? This just converts the huge allocations in mptbase to use
GFP_KERNEL. Christophe (added to Cc) actually has a scripted conversion for the rest that he hasn't posted yet, so I'll aim for the minimal version here.
The previously failing test passes with this patch applied on top of the mainline kernel.
Guenter
Quoted 91 lines
drivers/message/fusion/mptbase.c +18
-18@@ -1324,13 +1324,13 @@ mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init)return 0 ;/* fw doesn't need any host buffers */ /* spin till we get enough memory */ -while (host_page_buffer_sz >0 ) { - -if ((ioc->HostPageBuffer =pci_alloc_consistent ( - ioc->pcidev, - host_page_buffer_sz, - &ioc->HostPageBuffer_dma)) !=NULL ) { - +while (host_page_buffer_sz >0 ) { + ioc->HostPageBuffer = +dma_alloc_coherent (&ioc->pcidev->dev, + host_page_buffer_sz, + &ioc->HostPageBuffer_dma, +GFP_KERNEL ); +if (ioc->HostPageBuffer) { dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "host_page_buffer @ %p, dma @ %x, sz=%d bytes\n", ioc->name, ioc->HostPageBuffer,@@ -2741,8 +2741,8 @@ mpt_adapter_disable(MPT_ADAPTER *ioc) sz = ioc->alloc_sz;dexitprintk (ioc,printk (MYIOC_s_INFO_FMT"free @ %p, sz=%d bytes\n" , ioc->name, ioc->alloc, ioc->alloc_sz)); -pci_free_consistent (ioc->pcidev, sz, - ioc->alloc, ioc->alloc_dma); +dma_free_coherent (&ioc->pcidev->dev, sz, ioc->alloc, + ioc->alloc_dma); ioc->reply_frames =NULL ; ioc->req_frames =NULL ; ioc->alloc =NULL ;@@ -2751,8 +2751,8 @@ mpt_adapter_disable(MPT_ADAPTER *ioc)if (ioc->sense_buf_pool !=NULL ) { sz = (ioc->req_depth *MPT_SENSE_BUFFER_ALLOC ); -pci_free_consistent (ioc->pcidev, sz, - ioc->sense_buf_pool, ioc->sense_buf_pool_dma); +dma_free_coherent (&ioc->pcidev->dev, sz, ioc->sense_buf_pool, + ioc->sense_buf_pool_dma); ioc->sense_buf_pool =NULL ; ioc->alloc_total -= sz; }@@ -2802,7 +2802,7 @@ mpt_adapter_disable(MPT_ADAPTER *ioc)"HostPageBuffer free @ %p, sz=%d bytes\n" , ioc->name, ioc->HostPageBuffer, ioc->HostPageBuffer_sz)); -pci_free_consistent (ioc->pcidev, ioc->HostPageBuffer_sz, +dma_free_coherent (&ioc->pcidev->dev, ioc->HostPageBuffer_sz, ioc->HostPageBuffer, ioc->HostPageBuffer_dma); ioc->HostPageBuffer =NULL ; ioc->HostPageBuffer_sz =0 ;@@ -4497,7 +4497,8 @@ PrimeIocFifos(MPT_ADAPTER *ioc) ioc->name, sz, sz, num_chain)); total_size += sz; - mem =pci_alloc_consistent (ioc->pcidev, total_size, &alloc_dma); + mem =dma_alloc_coherent (&ioc->pcidev->dev, total_size, + &alloc_dma,GFP_KERNEL );if (mem ==NULL ) {printk (MYIOC_s_ERR_FMT"Unable to allocate Reply, Request, Chain Buffers!\n" , ioc->name);@@ -4574,8 +4575,8 @@ PrimeIocFifos(MPT_ADAPTER *ioc)spin_unlock_irqrestore (&ioc->FreeQlock, flags); sz = (ioc->req_depth *MPT_SENSE_BUFFER_ALLOC ); - ioc->sense_buf_pool = -pci_alloc_consistent (ioc->pcidev, sz, &ioc->sense_buf_pool_dma); + ioc->sense_buf_pool =dma_alloc_coherent (&ioc->pcidev->dev, sz, + &ioc->sense_buf_pool_dma,GFP_KERNEL );if (ioc->sense_buf_pool ==NULL ) {printk (MYIOC_s_ERR_FMT"Unable to allocate Sense Buffers!\n" , ioc->name);@@ -4613,18 +4614,16 @@ PrimeIocFifos(MPT_ADAPTER *ioc)if (ioc->alloc !=NULL ) { sz = ioc->alloc_sz; -pci_free_consistent (ioc->pcidev, - sz, - ioc->alloc, ioc->alloc_dma); +dma_free_coherent (&ioc->pcidev->dev, sz, ioc->alloc, + ioc->alloc_dma); ioc->reply_frames =NULL ; ioc->req_frames =NULL ; ioc->alloc_total -= sz; }
drivers/message/fusion/mptbase.c PrimeIocFifos(MPT_ADAPTER *ioc) · line 4629
Quoted 10 lines
drivers/message/fusion/mptbase.c +2
-3if (ioc->sense_buf_pool !=NULL ) { sz = (ioc->req_depth *MPT_SENSE_BUFFER_ALLOC ); -pci_free_consistent (ioc->pcidev, - sz, - ioc->sense_buf_pool, ioc->sense_buf_pool_dma); +dma_free_coherent (&ioc->pcidev->dev, sz, ioc->sense_buf_pool, + ioc->sense_buf_pool_dma); ioc->sense_buf_pool =NULL ; }
_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
Le 24/06/2020 à 09:38, Christoph Hellwig a écrit :
Quoted 6 lines
Hi Guenter,
can you try the patch below? This just converts the huge allocations in mptbase to use
GFP_KERNEL. Christophe (added to Cc) actually has a scripted conversion for the rest that he hasn't posted yet, so I'll aim for the minimal version here.
Hi,
I'm sorry, but I will not send pci_ --> dma_ conversion for this driver.
I'm a bit puzzled by some choice of GFP_KERNEL and GFP_ATOMIC that not all that obvious to me.
I'll try to send some patches for other easier drivers in the coming weeks.
Best regards,
CJ
Quoted 5 lines · Marion & Christophe JAILLET
I'm sorry, but I will not send
pci_-->dma_conversion for this driver. I'm a bit puzzled by some choice ofGFP_KERNELandGFP_ATOMICthat not all that obvious to me.I'll try to send some patches for other easier drivers in the coming weeks.
No problem, I sent a patch for the conversion of the allocations that caused problems.
_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu