fsi: core: Set slave local bus ownership during init
Eddie James
maintainerPATCH v2 1/1 fsi: core: Set slave local bus ownership during init
The FSI specification indicates that a slave will prevent access to the CFAM address space for a master without local bus ownership. Therefore, force local bus ownership when initializing the slave.
Signed-off-by Eddie James <[email protected]>
--- drivers/fsi/fsi-core.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-)
drivers/fsi/fsi-core.c +21 -1
@@ -50,6 +50,7 @@ static const int engine_page_size = 0x400;#define FSI_SMODE 0x0/* R/W: Mode register */ #define FSI_SISC 0x8/* R/W: Interrupt condition */ #define FSI_SSTAT 0x14/* R : Slave status */ +#define FSI_SLBUS 0x30/* W : LBUS Ownership */ #define FSI_LLMODE 0x100/* R/W: Link layer mode register */ /*
@@ -66,6 +67,11 @@ static const int engine_page_size = 0x400;#define FSI_SMODE_LBCRR_SHIFT 8/* Clk ratio shift */ #define FSI_SMODE_LBCRR_MASK 0xf/* Clk ratio mask */ +/* +* SLBUS fields +*/ +#define FSI_SLBUS_FORCE 0x80000000/* Force LBUS ownership */ +/* * LLMODE fields */
@@ -981,7 +987,7 @@ static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id)uint32_t cfam_id;struct fsi_slave *slave;uint8_t crc; -__be32 data, llmode; +__be32 data, llmode, slbus;int rc;/* Currently, we only support single slaves on a link, and use the
@@ -1052,6 +1058,20 @@ static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id) } +/* +* The FSI specification requires that the master claim ownership of +* bus before accessing the CFAM address space. This driver doesn't yet +* support more complex multi-master situations, so just force +* ownership of the bus now. +*/ + slbus =cpu_to_be32 (FSI_SLBUS_FORCE ); + rc =fsi_master_write (master, link, id,FSI_SLAVE_BASE +FSI_SLBUS , + &slbus,sizeof (slbus)); +if (rc) +dev_warn (&master->dev, +"can't set slbus on slave:%02x:%02x %d\n" , link, id, + rc); + rc =fsi_slave_set_smode (slave);if (rc) { dev_warn(&master->dev,
Signature · 1 line
2.24.0