Make check implementation arch agnostic
Subsystems (3)
cover Make check implementation arch agnostic
Hi,
The current implementation of the check subcommand has various x86 bits here and there. In order to prepare objtool to provide check for other architectures, add some abstraction over the x86 specific bits, relying on objtool arch specific code to provide some necessary operations.
This is part of the effort to implement check for arm64, initiated [1] by Raphael. The series is based on top of the separation of check & orc subcommands series[2].
I've push both series base on top of tip/objtool/core at [3].
- The first two patches make it simpler for new arches to provide their list of kernel headers, without worrying about modifications in the x86 headers.
- Patch 3 Moves arch specific macros to more suitable location
- Patches 4 and 5 add abstraction to handle alternatives
- Patch 6 adds abstraction to handle jump table
- Patch 7 abstracts the use of unwind hints. Adding it as RFC as I'm sure there's room for improvement.
[1] https://lkml.org/lkml/2019/8/16/400
[2] https://lkml.org/lkml/2020/6/8/59
[3] https://github.com/julien-thierry/linux/tree/arch-independent-check
Cheers,
Julien
-->
Julien Thierry (6):
objtool: Group headers to check in a single list
objtool: Make sync-check consider the target architecture
objtool: Move macros describing structures to arch-dependent code
objtool: Abstract alternative special case handling
objtool: Make relocation in alternative handling arch dependent
objtool: Make unwind_hints available for all architectures
Raphael Gault (1):
objtool: Refactor switch-tables code to support other architectures
arch/x86/include/asm/orc_types.h | 13 -- arch/x86/include/asm/unwind_hints.h | 44 +---- include/linux/frame.h | 83 ++++++++- tools/arch/x86/include/asm/orc_types.h | 13 -- tools/include/linux/frame.h | 114 ++++++++++++ tools/objtool/Makefile | 2 +- tools/objtool/arch.h | 5 +- tools/objtool/arch/x86/Build | 1 + tools/objtool/arch/x86/arch_special.c | 145 +++++++++++++++ tools/objtool/arch/x86/decode.c | 54 ++++++ tools/objtool/arch/x86/include/arch_special.h | 20 +++ tools/objtool/cfi.h | 3 +- tools/objtool/check.c | 166 ++---------------- tools/objtool/check.h | 7 +- tools/objtool/objtool.h | 2 + tools/objtool/orc_gen.c | 4 +- tools/objtool/special.c | 48 +---- tools/objtool/special.h | 10 ++ tools/objtool/sync-check.sh | 27 ++- tools/objtool/weak.c | 2 - 20 files changed, 490 insertions(+), 273 deletions(-) create mode 100644 tools/include/linux/frame.h create mode 100644 tools/objtool/arch/x86/arch_special.c create mode 100644 tools/objtool/arch/x86/include/arch_special.h
--
2.21.1
PATCH 1/7 objtool: Group headers to check in a single list
In order to support multiple architectures and potentially different sets of header to compare against their kernel equivalent, it is simpler to have all headers to check in a single list.
--- tools/objtool/sync-check.sh | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-)
tools/objtool/sync-check.sh +12 -9
@@ -1,13 +1,17 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0 -FILES=' +FILES=" arch/x86/include/asm/inat_types.h arch/x86/include/asm/orc_types.h arch/x86/include/asm/emulate_prefix.h arch/x86/lib/x86-opcode-map.txt arch/x86/tools/gen-insn-attr-x86.awk -' +arch/x86/include/asm/inat.h -I '^#include [\"<]\(asm/\)*inat_types.h[\">]' +arch/x86/include/asm/insn.h -I '^#include [\"<]\(asm/\)*inat.h[\">]' +arch/x86/lib/inat.c -I '^#include [\"<]\(../include/\)*asm/insn.h[\">]' +arch/x86/lib/insn.c -I '^#include [\"<]\(../include/\)*asm/in\(at\|sn\).h[\">]' -I '^#include [\"<]\(../include/\)*asm/emulate_prefix.h[\">]' +" check_2 () { file1=$1
@@ -40,11 +44,10 @@ fi cd ../.. -for i in $FILES; do - check $i -done +while read -r file_entry; do + if [ -z "$file_entry" ]; then + continue + fi -check arch/x86/include/asm/inat.h '-I "^#include [\"<]\(asm/\)*inat_types.h[\">]"' -check arch/x86/include/asm/insn.h '-I "^#include [\"<]\(asm/\)*inat.h[\">]"' -check arch/x86/lib/inat.c '-I "^#include [\"<]\(../include/\)*asm/insn.h[\">]"' -check arch/x86/lib/insn.c '-I "^#include [\"<]\(../include/\)*asm/in\(at\|sn\).h[\">]" -I "^#include [\"<]\(../include/\)*asm/emulate_prefix.h[\">]"' + check $file_entry +done <<< $FILES
Signature · 1 line
2.21.1
PATCH 2/7 objtool: Make sync-check consider the target architecture
In reply to Julien ThierryDo not take into account outdated headers unrelated to the build of the current architecture.
--- tools/objtool/Makefile | 2 +- tools/objtool/sync-check.sh | 4 ++++ 2 files changed, 5 insertions(+), 1 deletion(-)
tools/objtool/Makefile +1 -1
@@ -60,7 +60,7 @@ export srctree OUTPUT CFLAGS SRCARCH AWK include $(srctree)/tools/build/Makefile.include $(OBJTOOL_IN): fixdep FORCE - @$(CONFIG_SHELL) ./sync-check.sh + @$(CONFIG_SHELL) ./sync-check.sh $(SRCARCH) @$(MAKE) $(build)=objtool $(OBJTOOL): $(LIBSUBCMD) $(OBJTOOL_IN)
tools/objtool/sync-check.sh +4 -0
@@ -1,6 +1,9 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0 +TARGET_ARCH=$1 + +if [ "$TARGET_ARCH" == "x86" ]; then FILES=" arch/x86/include/asm/inat_types.h arch/x86/include/asm/orc_types.h
@@ -12,6 +15,7 @@ arch/x86/include/asm/insn.h -I '^#include [\"<]\(asm/\)*inat.h[\">]' arch/x86/lib/inat.c -I '^#include [\"<]\(../include/\)*asm/insn.h[\">]' arch/x86/lib/insn.c -I '^#include [\"<]\(../include/\)*asm/in\(at\|sn\).h[\">]' -I '^#include [\"<]\(../include/\)*asm/emulate_prefix.h[\">]' " +fi check_2 () { file1=$1
Signature · 1 line
2.21.1
PATCH 3/7 objtool: Move macros describing structures to arch-dependent code
In reply to Julien ThierrySome macros are defined to describe the size and layout of structures exception_table_entry, jump_entry and alt_instr. These values can vary from one architecture to another.
Have the values be defined by arch specific code.
--- tools/objtool/arch/x86/include/arch_special.h | 20 +++++++++++++++++++ tools/objtool/special.c | 16 +-------------- 2 files changed, 21 insertions(+), 15 deletions(-) create mode 100644 tools/objtool/arch/x86/include/arch_special.h
tools/objtool/arch/x86/include/arch_special.h new file +20 -0
@@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _X86_ARCH_SPECIAL_H +#define _X86_ARCH_SPECIAL_H + +#define EX_ENTRY_SIZE 12 +#define EX_ORIG_OFFSET 0 +#define EX_NEW_OFFSET 4 + +#define JUMP_ENTRY_SIZE 16 +#define JUMP_ORIG_OFFSET 0 +#define JUMP_NEW_OFFSET 4 + +#define ALT_ENTRY_SIZE 13 +#define ALT_ORIG_OFFSET 0 +#define ALT_NEW_OFFSET 4 +#define ALT_FEATURE_OFFSET 8 +#define ALT_ORIG_LEN_OFFSET 10 +#define ALT_NEW_LEN_OFFSET 11 + +#endif /* _X86_ARCH_SPECIAL_H */
tools/objtool/special.c +1 -15
@@ -14,21 +14,7 @@#include "builtin.h" #include "special.h" #include "warn.h" - -#define EX_ENTRY_SIZE 12 -#define EX_ORIG_OFFSET 0 -#define EX_NEW_OFFSET 4 - -#define JUMP_ENTRY_SIZE 16 -#define JUMP_ORIG_OFFSET 0 -#define JUMP_NEW_OFFSET 4 - -#define ALT_ENTRY_SIZE 13 -#define ALT_ORIG_OFFSET 0 -#define ALT_NEW_OFFSET 4 -#define ALT_FEATURE_OFFSET 8 -#define ALT_ORIG_LEN_OFFSET 10 -#define ALT_NEW_LEN_OFFSET 11 +#include "arch_special.h" #define X86_FEATURE_POPCNT (4*32+23)#define X86_FEATURE_SMAP (9*32+20)
Signature · 1 line
2.21.1
PATCH 4/7 objtool: Abstract alternative special case handling
In reply to Julien ThierrySome alternatives associated with a specific feature need to be treated in a special way. Since the features and how to treat them vary from one architecture to another, move the special case handling to arch specific code.
--- tools/objtool/arch/x86/Build | 1 + tools/objtool/arch/x86/arch_special.c | 37 +++++++++++++++++++++++++++ tools/objtool/objtool.h | 2 ++ tools/objtool/special.c | 32 ++++------------------- tools/objtool/special.h | 2 ++ tools/objtool/weak.c | 2 -- 6 files changed, 47 insertions(+), 29 deletions(-) create mode 100644 tools/objtool/arch/x86/arch_special.c
tools/objtool/arch/x86/Build +1 -0
@@ -1,3 +1,4 @@ +objtool-y += arch_special.o objtool-y += decode.o inat_tables_script = ../arch/x86/tools/gen-insn-attr-x86.awk
tools/objtool/arch/x86/arch_special.c new file +37 -0
@@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +#include "../../special.h" +#include "../../builtin.h" + +#define X86_FEATURE_POPCNT (4 * 32 + 23) +#define X86_FEATURE_SMAP (9 * 32 + 20) + +void arch_handle_alternative (unsigned short feature,struct special_alt *alt) +{ +switch (feature) { +case X86_FEATURE_SMAP : +/* +* If UACCESS validation is enabled; force that alternative; +* otherwise force it the other way. +* +* What we want to avoid is having both the original and the +* alternative code flow at the same time, in that case we can +* find paths that see the STAC but take the NOP instead of +* CLAC and the other way around. +*/ +if (uaccess) + alt->skip_orig = true; +else + alt->skip_alt = true; +break ; +case X86_FEATURE_POPCNT : +/* +* It has been requested that we don't validate the !POPCNT +* feature path which is a "very very small percentage of +* machines". +*/ + alt->skip_orig = true; +break ; +default : +break ; + } +}
tools/objtool/objtool.h +2 -0
@@ -12,6 +12,8 @@#include "elf.h" +#define __weak __attribute__((weak)) +struct objtool_file {struct elf *elf;struct list_head insn_list;
tools/objtool/special.c +5 -27
@@ -16,9 +16,6 @@#include "warn.h" #include "arch_special.h" -#define X86_FEATURE_POPCNT (4*32+23) -#define X86_FEATURE_SMAP (9*32+20) -struct special_entry {const char *sec;bool group, jump_or_nop;
@@ -54,6 +51,10 @@ struct special_entry entries[] = { {}, }; +void __weak arch_handle_alternative (unsigned short feature,struct special_alt *alt) +{ +} +static int get_alt_entry (struct elf *elf,struct special_entry *entry,struct section *sec,int idx,struct special_alt *alt)
@@ -78,30 +79,7 @@ static int get_alt_entry(struct elf *elf, struct special_entry *entry, feature = *(unsigned short *)(sec->data->d_buf + offset + entry->feature); - -/* -* It has been requested that we don't validate the !POPCNT -* feature path which is a "very very small percentage of -* machines". -*/ -if (feature ==X86_FEATURE_POPCNT ) - alt->skip_orig = true; - -/* -* If UACCESS validation is enabled; force that alternative; -* otherwise force it the other way. -* -* What we want to avoid is having both the original and the -* alternative code flow at the same time, in that case we can -* find paths that see the STAC but take the NOP instead of -* CLAC and the other way around. -*/ -if (feature ==X86_FEATURE_SMAP ) { -if (uaccess) - alt->skip_orig = true; -else - alt->skip_alt = true; - } +arch_handle_alternative (feature, alt); } orig_rela =find_rela_by_dest (elf, sec, offset + entry->orig);
tools/objtool/special.h +2 -0
@@ -28,4 +28,6 @@ struct special_alt {int special_get_alts (struct elf *elf,struct list_head *alts); +void arch_handle_alternative (unsigned short feature,struct special_alt *alt); +#endif /* _SPECIAL_H */
tools/objtool/weak.c +0 -2
@@ -9,8 +9,6 @@#include <errno.h> #include "objtool.h" -#define __weak __attribute__((weak)) -#define UNSUPPORTED (name) \ ({ \ fprintf(stderr, "error: objtool: " name " not implemented\n"); \
Signature · 1 line
2.21.1
PATCH 5/7 objtool: Make relocation in alternative handling arch dependent
In reply to Julien ThierryAs pointed out by the comment in handle_group_alt(), support of relocation for instructions in an alternative group depends on whether arch specific kernel code handles it.
So, let objtool arch specific code decide whether a relocation for the alternative section should be accepted.
--- tools/objtool/arch/x86/arch_special.c | 13 +++++++++++++ tools/objtool/check.c | 19 ++++++------------- tools/objtool/check.h | 6 ++++++ tools/objtool/special.h | 4 ++++ 4 files changed, 29 insertions(+), 13 deletions(-)
tools/objtool/arch/x86/arch_special.c +13 -0
@@ -35,3 +35,16 @@ void arch_handle_alternative(unsigned short feature, struct special_alt *alt)break ; } } + +bool arch_support_alt_relocation (struct special_alt *special_alt, +struct instruction *insn, +struct rela *rela) +{ +/* +* The x86 alternatives code adjusts the offsets only when it +* encounters a branch instruction at the very beginning of the +* replacement group. +*/ +return insn->offset == special_alt->new_off && + (insn->type ==INSN_CALL ||is_static_jump (insn)); +}
tools/objtool/check.c +6 -13
@@ -108,12 +108,6 @@ static struct instruction *prev_insn_same_sym(struct objtool_file *file,for (insn =next_insn_same_sec (file, insn); insn; \ insn =next_insn_same_sec (file, insn)) -static bool is_static_jump(struct instruction *insn) -{ -return insn->type ==INSN_JUMP_CONDITIONAL || - insn->type ==INSN_JUMP_UNCONDITIONAL ; -} - static bool is_sibling_call(struct instruction *insn) {/* An indirect jump is either a sibling call or a jump to a table. */
@@ -825,6 +819,8 @@ static int handle_group_alt(struct objtool_file *file, alt_group = alt_group_next_index++; insn = *new_insn;sec_for_each_insn_from (file, insn) { +struct rela *alt_rela; +if (insn->offset >= special_alt->new_off + special_alt->new_len)break ;
@@ -841,14 +837,11 @@ static int handle_group_alt(struct objtool_file *file,* .altinstr_replacement section, unless the arch's * alternatives code can adjust the relative offsets * accordingly. -* -* The x86 alternatives code adjusts the offsets only when it -* encounters a branch instruction at the very beginning of the -* replacement group. */ -if ((insn->offset != special_alt->new_off || - (insn->type !=INSN_CALL && !is_static_jump (insn))) && -find_rela_by_dest_range (file->elf, insn->sec, insn->offset, insn->len)) { + alt_rela =find_rela_by_dest_range (file->elf, insn->sec, + insn->offset, insn->len); +if (alt_rela && + !arch_support_alt_relocation (special_alt, insn, alt_rela)) {WARN_FUNC ("unsupported relocation in alternatives section" , insn->sec, insn->offset);
tools/objtool/check.h +6 -0
@@ -44,6 +44,12 @@ struct instruction {struct cfi_state cfi; }; +static inline bool is_static_jump (struct instruction *insn) +{ +return insn->type ==INSN_JUMP_CONDITIONAL || + insn->type ==INSN_JUMP_UNCONDITIONAL ; +} +struct instruction *find_insn (struct objtool_file *file,struct section *sec,unsigned long offset);
tools/objtool/special.h +4 -0
@@ -7,6 +7,7 @@#define _SPECIAL_H#include <stdbool.h> +#include "check.h" #include "elf.h" struct special_alt {
@@ -30,4 +31,7 @@ int special_get_alts(struct elf *elf, struct list_head *alts);void arch_handle_alternative (unsigned short feature,struct special_alt *alt); +bool arch_support_alt_relocation (struct special_alt *special_alt, +struct instruction *insn, +struct rela *rela);#endif /* _SPECIAL_H */
Signature · 1 line
2.21.1
PATCH 6/7 objtool: Refactor switch-tables code to support other architectures
In reply to Julien ThierryFrom: Raphael Gault <[email protected]>
The way to identify switch-tables and retrieves all the data necessary to handle the different execution branches is not the same on all architecture. In order to be able to add other architecture support, define an arch-dependent function to process jump-tables.
[J.T.: Move arm64 bits out of this patch,
Have only one function to find the start of the jump table, for now assume that the jump table format will be the same as x86]
--- tools/objtool/arch/x86/arch_special.c | 95 +++++++++++++++++++++++++++ tools/objtool/check.c | 88 +------------------------ tools/objtool/check.h | 1 - tools/objtool/special.h | 4 ++ 4 files changed, 102 insertions(+), 86 deletions(-)
tools/objtool/arch/x86/arch_special.c +95 -0
@@ -1,4 +1,6 @@// SPDX-License-Identifier: GPL-2.0-or-later +#include <string.h> +#include "../../special.h" #include "../../builtin.h"
@@ -48,3 +50,96 @@ bool arch_support_alt_relocation(struct special_alt *special_alt,return insn->offset == special_alt->new_off && (insn->type ==INSN_CALL ||is_static_jump (insn)); } + +/* +* There are 3 basic jump table patterns: +* +* 1. jmpq *[rodata addr](,%reg,8) +* +* This is the most common case by far. It jumps to an address in a simple +* jump table which is stored in .rodata. +* +* 2. jmpq *[rodata addr](%rip) +* +* This is caused by a rare GCC quirk, currently only seen in three driver +* functions in the kernel, only with certain obscure non-distro configs. +* +* As part of an optimization, GCC makes a copy of an existing switch jump +* table, modifies it, and then hard-codes the jump (albeit with an indirect +* jump) to use a single entry in the table. The rest of the jump table and +* some of its jump targets remain as dead code. +* +* In such a case we can just crudely ignore all unreachable instruction +* warnings for the entire object file. Ideally we would just ignore them +* for the function, but that would require redesigning the code quite a +* bit. And honestly that's just not worth doing: unreachable instruction +* warnings are of questionable value anyway, and this is such a rare issue. +* +* 3. mov [rodata addr],%reg1 +* ... some instructions ... +* jmpq *(%reg1,%reg2,8) +* +* This is a fairly uncommon pattern which is new for GCC 6. As of this +* writing, there are 11 occurrences of it in the allmodconfig kernel. +* +* As of GCC 7 there are quite a few more of these and the 'in between' code +* is significant. Esp. with KASAN enabled some of the code between the mov +* and jmpq uses .rodata itself, which can confuse things. +* +* TODO: Once we have DWARF CFI and smarter instruction decoding logic, +* ensure the same register is used in the mov and jump instructions. +* +* NOTE: RETPOLINE made it harder still to decode dynamic jumps. +*/ +struct rela *arch_find_switch_table (struct objtool_file *file, +struct instruction *insn) +{ +struct rela *text_rela, *rodata_rela; +struct section *table_sec; +unsigned long table_offset; + +/* look for a relocation which references .rodata */ + text_rela =find_rela_by_dest_range (file->elf, insn->sec, + insn->offset, insn->len); +if (!text_rela || text_rela->sym->type !=STT_SECTION || + !text_rela->sym->sec->rodata) +return NULL ; + + table_offset = text_rela->addend; + table_sec = text_rela->sym->sec; + +if (text_rela->type ==R_X86_64_PC32 ) + table_offset +=4 ; + +/* +* Make sure the .rodata address isn't associated with a +* symbol. GCC jump tables are anonymous data. +* +* Also support C jump tables which are in the same format as +* switch jump tables. For objtool to recognize them, they +* need to be placed in the C_JUMP_TABLE_SECTION section. They +* have symbols associated with them. +*/ +if (find_symbol_containing (table_sec, table_offset) && +strcmp (table_sec->name,C_JUMP_TABLE_SECTION )) +return NULL ; + +/* +* Each table entry has a rela associated with it. The rela +* should reference text in the same function as the original +* instruction. +*/ + rodata_rela =find_rela_by_dest (file->elf, table_sec, table_offset); +if (!rodata_rela) +return NULL ; + +/* +* Use of RIP-relative switch jumps is quite rare, and +* indicates a rare GCC quirk/bug which can leave dead +* code behind. +*/ +if (text_rela->type ==R_X86_64_PC32 ) + file->ignore_unreachables = true; + +return rodata_rela; +}
tools/objtool/check.c +3 -85
118 lines not on this page · raw message
tools/objtool/check.h +0 -1
@@ -62,5 +62,4 @@ struct instruction *find_insn(struct objtool_file *file, insn->sec == sec; \ insn = list_next_entry(insn, list)) -#endif /* _CHECK_H */
tools/objtool/special.h +4 -0
@@ -10,6 +10,8 @@#include "check.h" #include "elf.h" +#define C_JUMP_TABLE_SECTION ".rodata..c_jump_table" +struct special_alt {struct list_head list;
@@ -34,4 +36,6 @@ void arch_handle_alternative(unsigned short feature, struct special_alt *alt);bool arch_support_alt_relocation (struct special_alt *special_alt,struct instruction *insn,struct rela *rela); +struct rela *arch_find_switch_table (struct objtool_file *file, +struct instruction *insn);#endif /* _SPECIAL_H */
Signature · 1 line
2.21.1
RFC PATCH 7/7 objtool: Make unwind_hints available for all architectures
In reply to Julien ThierryUnwind hints are useful to give some information about the call frame or stack states in non-standard code.
Despite unwind hints being used in arch-independent code, the unwind_hint structure type itself is define in x86 kernel headers.
This is because what an unwind hint will describe is very architecture specific, both regarding the state and the affected registers.
To get to share this concept, expose the unwind_hint structure across architecutres. However, the hint types remain defined by the architecture code. Objtool then needs it's arch specific code to "decode" the unwind hint into a cfi_state.
--- arch/x86/include/asm/orc_types.h | 13 --- arch/x86/include/asm/unwind_hints.h | 44 ++-------- include/linux/frame.h | 83 +++++++++++++++++- tools/arch/x86/include/asm/orc_types.h | 13 --- tools/include/linux/frame.h | 114 +++++++++++++++++++++++++ tools/objtool/arch.h | 5 +- tools/objtool/arch/x86/decode.c | 54 ++++++++++++ tools/objtool/cfi.h | 3 +- tools/objtool/check.c | 59 +++---------- tools/objtool/orc_gen.c | 4 +- tools/objtool/sync-check.sh | 4 +- 11 files changed, 275 insertions(+), 121 deletions(-) create mode 100644 tools/include/linux/frame.h
arch/x86/include/asm/orc_types.h +0 -13
@@ -78,19 +78,6 @@ struct orc_entry { unsigned end:1; } __packed; -/* -* This struct is used by asm and inline asm code to manually annotate the -* location of registers on the stack for the ORC unwinder. -* -* Type can be either ORC_TYPE_* or UNWIND_HINT_TYPE_*. -*/ -struct unwind_hint { -u32 ip; -s16 sp_offset; -u8 sp_reg; -u8 type; -u8 end; -};#endif /* __ASSEMBLY__ */ #endif /* _ORC_TYPES_H */
arch/x86/include/asm/unwind_hints.h +5 -39
67 lines not on this page · raw message
include/linux/frame.h +81 -2
105 lines not on this page · raw message
tools/arch/x86/include/asm/orc_types.h +0 -13
@@ -78,19 +78,6 @@ struct orc_entry { unsigned end:1; } __packed; -/* -* This struct is used by asm and inline asm code to manually annotate the -* location of registers on the stack for the ORC unwinder. -* -* Type can be either ORC_TYPE_* or UNWIND_HINT_TYPE_*. -*/ -struct unwind_hint { -u32 ip; -s16 sp_offset; -u8 sp_reg; -u8 type; -u8 end; -};#endif /* __ASSEMBLY__ */ #endif /* _ORC_TYPES_H */
tools/include/linux/frame.h new file +114 -0
114 lines not on this page · raw message
tools/objtool/arch.h +3 -2
@@ -7,12 +7,11 @@#define _ARCH_H#include <stdbool.h> +#include <linux/frame.h> #include <linux/list.h> #include "objtool.h" #include "cfi.h" -#include <asm/orc_types.h> -enum insn_type {INSN_JUMP_CONDITIONAL ,INSN_JUMP_UNCONDITIONAL ,
@@ -84,4 +83,6 @@ unsigned long arch_jump_destination(struct instruction *insn);unsigned long arch_dest_rela_offset (int addend); +int arch_decode_insn_hint (struct instruction *insn,struct unwind_hint *hint); +#endif /* _ARCH_H */
tools/objtool/arch/x86/decode.c +54 -0
69 lines not on this page · raw message
tools/objtool/cfi.h +2 -1
@@ -29,10 +29,11 @@ struct cfi_state {struct cfi_reg cfa;int stack_size;int drap_reg, drap_offset; -unsigned char type; +unsigned char hint_type;bool bp_scratch;bool drap;bool end; + bool sp_only; };#endif /* _OBJTOOL_CFI_H */
tools/objtool/check.c +10 -49
99 lines not on this page · raw message
tools/objtool/orc_gen.c +3 -1
@@ -9,6 +9,8 @@#include "check.h" #include "warn.h" +#include <asm/orc_types.h> +struct orc_data {struct list_head list;struct instruction *insn;
@@ -92,7 +94,7 @@ int create_orc(struct objtool_file *file) orc->sp_offset = cfa->offset; orc->bp_offset = bp->offset; - orc->type = insn->cfi.type; + orc->type = insn->cfi.hint_type; }return 0 ;
tools/objtool/sync-check.sh +3 -1
@@ -3,8 +3,10 @@ TARGET_ARCH=$1 +FILES="include/linux/frame.h" + if [ "$TARGET_ARCH" == "x86" ]; then -FILES=" +FILES="$FILES arch/x86/include/asm/inat_types.h arch/x86/include/asm/orc_types.h arch/x86/include/asm/emulate_prefix.h
--
2.21.1
Re: [RFC PATCH 7/7] objtool: Make unwind_hints available for all architectures
Hi Julien,
Quoted 6 lines · Julien Thierry
Unwind hints are useful to give some information about the call frame or stack states in non-standard code.
Despite unwind hints being used in arch-independent code, the
unwind_hintstructure type itself is define in x86 kernel headers.
Quoted 7 lines
This is because what an unwind hint will describe is very architecture specific, both regarding the state and the affected registers.
To get to share this concept, expose the
unwind_hintstructure across architecutres. However, the hint types remain defined by the architecture code. Objtool then needs it's arch specific code to "decode" the unwind hint into acfi_state.
I think it would be nice to split the patch. Something like.
1. current include/linux/frame.h mixes assembly and non-assembly definitions, so introduce ASSEMBLY ifdef first seems like a good idea to me.
2. move the relevant definitions to frame.h and add the file to sync-check
3. the rest of the patch
Would it make sense?
Otherwise, it looks good to me.
Miroslav
Re: [RFC PATCH 7/7] objtool: Make unwind_hints available for all architectures
Hi Miroslav,
Quoted 24 lines · Miroslav Benes
Hi Julien,
Quoted 6 lines · Julien Thierry
Unwind hints are useful to give some information about the call frame or stack states in non-standard code.
Despite unwind hints being used in arch-independent code, the
unwind_hintstructure type itself is define in x86 kernel headers.Quoted 7 lines
This is because what an unwind hint will describe is very architecture specific, both regarding the state and the affected registers.
To get to share this concept, expose the
unwind_hintstructure across architecutres. However, the hint types remain defined by the architecture code. Objtool then needs it's arch specific code to "decode" the unwind hint into acfi_state.I think it would be nice to split the patch. Something like.
1. current
include/linux/frame.hmixes assembly and non-assembly definitions, so introduce ASSEMBLY ifdef first seems like a good idea to me.
Quoted 7 lines
2. move the relevant definitions to
frame.hand add the file to sync-check3. the rest of the patch
Would it make sense?
Yes, I think your approach will make it simpler to review. I wasn't sure how to split it but I like your suggestion, thank you for it.
I'll probably post the split patch separately if the rest of the series gets picked.
Cheers,
Signature · 1 line
Julien Thierry
Quoted 13 lines · Julien Thierry
Hi,
The current implementation of the check subcommand has various x86 bits here and there. In order to prepare objtool to provide check for other architectures, add some abstraction over the x86 specific bits, relying on objtool arch specific code to provide some necessary operations.
This is part of the effort to implement check for arm64, initiated [1] by Raphael. The series is based on top of the separation of check & orc subcommands series[2].
I've push both series base on top of tip/objtool/core at [3].
Quoted 8 lines
- The first two patches make it simpler for new arches to provide their list of kernel headers, without worrying about modifications in the x86 headers.
- Patch 3 Moves arch specific macros to more suitable location
- Patches 4 and 5 add abstraction to handle alternatives
- Patch 6 adds abstraction to handle jump table
- Patch 7 abstracts the use of unwind hints. Adding it as RFC as I'm sure there's room for improvement.
for patches 1-6.
M