Skip to contentSkip to conversation

x86/umip: Add emulation/spoofing for SLDT and STR instructions

PATCH Superseded Brendan Shanks 2 participants 3 messages Jun 8, 2020 – Jun 9, 2020 x86

v3 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 x86/umip: Add emulation/spoofing for SLDT and STR instructions

Add emulation/spoofing of SLDT and STR for both 32- and 64-bit processes.

Wine users have found a small number of Windows apps using SLDT that were crashing when run on UMIP-enabled systems.

---

v3: Use (GDT_ENTRY_TSS * 8) for task register selector instead of harcoding 0x40.

 arch/x86/kernel/umip.c | 32 +++++++++++++++++++++++---------
 1 file changed, 23 insertions(+), 9 deletions(-)
arch/x86/kernel/umip.c +23 -9
index 8d5cbe1bbb3b..166c579b0273 100644
@@ -244,16 +244,35 @@ static int emulate_umip_insn(struct insn *insn, int umip_inst,
 		*data_size += UMIP_GDT_IDT_LIMIT_SIZE;
 		memcpy(data, &dummy_limit, UMIP_GDT_IDT_LIMIT_SIZE);
 
-	} else if (umip_inst == UMIP_INST_SMSW) {
-		unsigned long dummy_value = CR0_STATE;
+	} else if (umip_inst == UMIP_INST_SMSW || umip_inst == UMIP_INST_SLDT ||
+		   umip_inst == UMIP_INST_STR) {
+		unsigned long dummy_value;
+
+		if (umip_inst == UMIP_INST_SMSW)
+			dummy_value = CR0_STATE;
+		else if (umip_inst == UMIP_INST_STR)
+			dummy_value = GDT_ENTRY_TSS * 8;
+		else if (umip_inst == UMIP_INST_SLDT)
+		{
+#ifdef CONFIG_MODIFY_LDT_SYSCALL
+			down_read(&current->mm->context.ldt_usr_sem);
+			if (current->mm->context.ldt)
+				dummy_value = GDT_ENTRY_LDT * 8;
+			else
+				dummy_value = 0;
+			up_read(&current->mm->context.ldt_usr_sem);
+#else
+			dummy_value = 0;
+#endif
+		}
 
 		/*
-		 * Even though the CR0 register has 4 bytes, the number
+		 * For these 3 instructions, the number
 		 * of bytes to be copied in the result buffer is determined
 		 * by whether the operand is a register or a memory location.
 		 * If operand is a register, return as many bytes as the operand
 		 * size. If operand is memory, return only the two least
-		 * siginificant bytes of CR0.
+		 * siginificant bytes.
 		 */
 		if (X86_MODRM_MOD(insn->modrm.value) == 3)
 			*data_size = insn->opnd_bytes;
@@ -261,7 +280,6 @@ static int emulate_umip_insn(struct insn *insn, int umip_inst,
 			*data_size = 2;
 
 		memcpy(data, &dummy_value, *data_size);
-	/* STR and SLDT  are not emulated */
 	} else {
 		return -EINVAL;
 	}
@@ -383,10 +401,6 @@ bool fixup_umip_exception(struct pt_regs *regs)
 	umip_pr_warn(regs, "%s instruction cannot be used by applications.\n",
 			umip_insns[umip_inst]);
 
-	/* Do not emulate (spoof) SLDT or STR. */
-	if (umip_inst == UMIP_INST_STR || umip_inst == UMIP_INST_SLDT)
-		return false;
-
 	umip_pr_warn(regs, "For now, expensive software emulation returns the result.\n");
 
 	if (emulate_umip_insn(&insn, umip_inst, dummy_data, &dummy_data_size,
Signature · 1 line
2.26.2
#1 lore raw
Quoted 27 lines · Brendan Shanks

Add emulation/spoofing of SLDT and STR for both 32- and 64-bit processes.

Wine users have found a small number of Windows apps using SLDT that were crashing when run on UMIP-enabled systems.

---

v3: Use (GDT_ENTRY_TSS * 8) for task register selector instead of harcoding 0x40.

 arch/x86/kernel/umip.c | 32 +++++++++++++++++++++++---------
 1 file changed, 23 insertions(+), 9 deletions(-)
arch/x86/kernel/umip.c +0 -2
index 8d5cbe1bbb3b..166c579b0273 100644
@@ -244,16 +244,35 @@ static int emulate_umip_insn(struct insn *insn, int umip_inst,
 		*data_size += UMIP_GDT_IDT_LIMIT_SIZE;
 		memcpy(data, &dummy_limit, UMIP_GDT_IDT_LIMIT_SIZE);
 
-	} else if (umip_inst == UMIP_INST_SMSW) {
-		unsigned long dummy_value = CR0_STATE;

arch/x86/kernel/umip.c static int emulate_umip_insn(struct insn *insn, int umip_inst, · line 256

Quoted 10 lines
arch/x86/kernel/umip.c +10 -0
+	} else if (umip_inst == UMIP_INST_SMSW || umip_inst == UMIP_INST_SLDT ||
+		   umip_inst == UMIP_INST_STR) {
+		unsigned long dummy_value;
+
+		if (umip_inst == UMIP_INST_SMSW)
+			dummy_value = CR0_STATE;
+		else if (umip_inst == UMIP_INST_STR)
+			dummy_value = GDT_ENTRY_TSS * 8;
+		else if (umip_inst == UMIP_INST_SLDT)
+		{

This brace should go in the previous line. Also, if you use braces in the last part of the conditional you should probably use them in the previous ones. I guess in this case it woudln't improve readability. Instead, you can probably have a switch instead of the three ifs. That probably does improve readability and solves the dilemma of needing to put braces in all the one-line conditionals.

BTW, you should also delete the comment at the top of the file saying that str and sldt will not be emulated:

arch/x86/kernel/umip.c +0 -3
index 166c579b0273..0984a55eb8c0 100644
@@ -45,9 +45,6 @@
  * value that, lies close to the top of the kernel memory. The limit for the GDT
  * and the IDT are set to zero.
  *
- * Given that SLDT and STR are not commonly used in programs that run on WineHQ
- * or DOSEMU2, they are not emulated.
- *
  * The instruction smsw is emulated to return the value that the register CR0
  * has at boot time as set in the head_32.
  *

Thanks and BR,
Ricardo

#2 lore raw
Quoted 54 lines · Ricardo Neri
Quoted 27 lines · Brendan Shanks

Add emulation/spoofing of SLDT and STR for both 32- and 64-bit processes.

Wine users have found a small number of Windows apps using SLDT that were crashing when run on UMIP-enabled systems.

---

v3: Use (GDT_ENTRY_TSS * 8) for task register selector instead of harcoding 0x40.

 arch/x86/kernel/umip.c | 32 +++++++++++++++++++++++---------
 1 file changed, 23 insertions(+), 9 deletions(-)
arch/x86/kernel/umip.c +0 -2
index 8d5cbe1bbb3b..166c579b0273 100644
@@ -244,16 +244,35 @@ static int emulate_umip_insn(struct insn *insn, int umip_inst,
 		*data_size += UMIP_GDT_IDT_LIMIT_SIZE;
 		memcpy(data, &dummy_limit, UMIP_GDT_IDT_LIMIT_SIZE);
 
-	} else if (umip_inst == UMIP_INST_SMSW) {
-		unsigned long dummy_value = CR0_STATE;

arch/x86/kernel/umip.c static int emulate_umip_insn(struct insn *insn, int umip_inst, · line 256

Quoted 10 lines
arch/x86/kernel/umip.c +10 -0
+	} else if (umip_inst == UMIP_INST_SMSW || umip_inst == UMIP_INST_SLDT ||
+		   umip_inst == UMIP_INST_STR) {
+		unsigned long dummy_value;
+
+		if (umip_inst == UMIP_INST_SMSW)
+			dummy_value = CR0_STATE;
+		else if (umip_inst == UMIP_INST_STR)
+			dummy_value = GDT_ENTRY_TSS * 8;
+		else if (umip_inst == UMIP_INST_SLDT)
+		{

This brace should go in the previous line. Also, if you use braces in the last part of the conditional you should probably use them in the previous ones. I guess in this case it woudln't improve readability. Instead, you can probably have a switch instead of the three ifs. That probably does improve readability and solves the dilemma of needing to put braces in all the one-line conditionals.

BTW, you should also delete the comment at the top of the file saying that str and sldt will not be emulated:

arch/x86/kernel/umip.c +0 -0
index 166c579b0273..0984a55eb8c0 100644

arch/x86/kernel/umip.c line 49

Quoted 8 lines
arch/x86/kernel/umip.c +0 -3
@@ -45,9 +45,6 @@
  * value that, lies close to the top of the kernel memory. The limit for the GDT
  * and the IDT are set to zero.
  *
- * Given that SLDT and STR are not commonly used in programs that run on WineHQ
- * or DOSEMU2, they are not emulated.
- *
  * The instruction smsw is emulated to return the value that the register CR0
  * has at boot time as set in the head_32.

... And also explain that the emulated values for str and sldt are the simply the values that Linux assigns programatically.

Thanks and BR,
Ricardo