Skip to contentSkip to conversation

spi: npcm-fiu: Reuse BITS_PER_BYTE definition

PATCH In review Andy Shevchenko 2 participants 2 messages Jun 18, 2020 – Jun 19, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 spi: npcm-fiu: Reuse BITS_PER_BYTE definition

No need to redefine already existing definition.
So, replace custom by generic one.

---
 drivers/spi/spi-npcm-fiu.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/spi/spi-npcm-fiu.c +3 -3
index d25ee32862e0..9468e71f03ad 100644
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 // Copyright (c) 2019 Nuvoton Technology corporation.
 
+#include <linux/bits.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
@@ -177,7 +178,6 @@ enum {
 #define MAP_SIZE_16MB			0x1000000
 #define MAP_SIZE_8MB			0x800000
 
-#define NUM_BITS_IN_BYTE		8
 #define FIU_DRD_MAX_DUMMY_NUMBER	3
 #define NPCM_MAX_CHIP_NUM		4
 #define CHUNK_SIZE			16
@@ -252,8 +252,8 @@ static void npcm_fiu_set_drd(struct npcm_fiu_spi *fiu,
 	fiu->drd_op.addr.buswidth = op->addr.buswidth;
 	regmap_update_bits(fiu->regmap, NPCM_FIU_DRD_CFG,
 			   NPCM_FIU_DRD_CFG_DBW,
-			   ((op->dummy.nbytes * ilog2(op->addr.buswidth))
-			    / NUM_BITS_IN_BYTE) << NPCM_FIU_DRD_DBW_SHIFT);
+			   ((op->dummy.nbytes * ilog2(op->addr.buswidth)) / BITS_PER_BYTE)
+			   << NPCM_FIU_DRD_DBW_SHIFT);
 	fiu->drd_op.dummy.nbytes = op->dummy.nbytes;
 	regmap_update_bits(fiu->regmap, NPCM_FIU_DRD_CFG,
 			   NPCM_FIU_DRD_CFG_RDCMD, op->cmd.opcode);
Signature · 1 line
2.27.0
maintainer
#1 lore raw
Quoted 2 lines · Andy Shevchenko

No need to redefine already existing definition.
So, replace custom by generic one.

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/1] spi: npcm-fiu: Reuse BITS_PER_BYTE definition

      commit: 0ec544ceb1c1ff65fb5588c6d71bccff2713f0d9

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark