hinic: add mailbox function support
Hello Luo bin,
The patch a425b6e1c69b: "hinic: add mailbox function support" from Apr 25, 2020, leads to the following static checker warning:
drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c:817 hinic_init_hwdev()
error: passing non negative 65280 to ERR_PTR
drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c
716 struct hinic_hwdev *hinic_init_hwdev(struct pci_dev *pdev) 717 {
718 struct hinic_pfhwdev *pfhwdev;
719 struct hinic_hwdev *hwdev;
720 struct hinic_hwif *hwif;
721 int err, num_aeqs;
722
723 hwif = devm_kzalloc(&pdev->dev, sizeof(*hwif), GFP_KERNEL);
724 if (!hwif)
725 return ERR_PTR(-ENOMEM);
726
727 err = hinic_init_hwif(hwif, pdev);
728 if (err) {
729 dev_err(&pdev->dev, "Failed to init HW interface\n");
730 return ERR_PTR(err);
731 }
732
733 pfhwdev = devm_kzalloc(&pdev->dev, sizeof(*pfhwdev), GFP_KERNEL);
734 if (!pfhwdev) {
735 err = -ENOMEM;
736 goto err_pfhwdev_alloc;
737 }
738
739 hwdev = &pfhwdev->hwdev;
740 hwdev->hwif = hwif;
741
742 err = init_msix(hwdev);
743 if (err) {
744 dev_err(&pdev->dev, "Failed to init msix\n");
745 goto err_init_msix;
746 }
747
748 err = wait_for_outbound_state(hwdev);
749 if (err) {
750 dev_warn(&pdev->dev, "outbound - disabled, try again\n");
751 hinic_outbound_state_set(hwif, HINIC_OUTBOUND_ENABLE);
752 }
753
754 num_aeqs = HINIC_HWIF_NUM_AEQS(hwif);
755
756 err = hinic_aeqs_init(&hwdev->aeqs, hwif, num_aeqs,
757 HINIC_DEFAULT_AEQ_LEN, HINIC_EQ_PAGE_SIZE,
758 hwdev->msix_entries);
759 if (err) {
760 dev_err(&pdev->dev, "Failed to init async event queues\n");
761 goto err_aeqs_init;
762 }
763
764 err = init_pfhwdev(pfhwdev);
765 if (err) {
766 dev_err(&pdev->dev, "Failed to init PF HW device\n");
767 goto err_init_pfhwdev;
768 }
769
770 err = hinic_l2nic_reset(hwdev);
771 if (err)
772 goto err_l2nic_reset;
773
774 err = get_dev_cap(hwdev);
^^^^^^^^^^^^^^^^^^^^^^^^This function sometimes returns positive values on error which will lead to an Oops eventually.
775 if (err) {
776 dev_err(&pdev->dev, "Failed to get device capabilities\n");
777 goto err_dev_cap;
778 }
779
780 err = hinic_vf_func_init(hwdev);
781 if (err) {
782 dev_err(&pdev->dev, "Failed to init nic mbox\n");
783 goto err_vf_func_init;
784 }
785
786 err = init_fw_ctxt(hwdev);
787 if (err) {
788 dev_err(&pdev->dev, "Failed to init function table\n");
789 goto err_init_fw_ctxt;
790 }
791
792 err = set_resources_state(hwdev, HINIC_RES_ACTIVE);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^Same here according to Smatch.
793 if (err) {
794 dev_err(&pdev->dev, "Failed to set resources state\n");
795 goto err_resources_state;
796 }
797
798 return hwdev;
799
800 err_resources_state:
801 err_init_fw_ctxt:
802 hinic_vf_func_free(hwdev);
803 err_vf_func_init:
804 err_l2nic_reset:
805 err_dev_cap:
806 free_pfhwdev(pfhwdev);
807
808 err_init_pfhwdev:
809 hinic_aeqs_free(&hwdev->aeqs);
810
811 err_aeqs_init:
812 disable_msix(hwdev);
813
814 err_init_msix:
815 err_pfhwdev_alloc:
816 hinic_free_hwif(hwif);
817 return ERR_PTR(err);
^^^If "err" isn't a negative error code it will lead to an Oops in the caller.
818 }
One function which will cause an Oops is mbox_resp_info_handler():
drivers/net/ethernet/huawei/hinic/hinic_hw_mbox.c
832 static int mbox_resp_info_handler(struct hinic_mbox_func_to_func *func_to_func,
833 struct hinic_recv_mbox *mbox_for_resp,
834 enum hinic_mod_type mod, u16 cmd,
835 void *buf_out, u16 *out_size)
836 {
837 int err;
838
839 if (mbox_for_resp->msg_info.status) {
840 err = mbox_for_resp->msg_info.status;
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 841 if (err != HINIC_MBOX_PF_BUSY_ACTIVE_FW)
842 dev_err(&func_to_func->hwif->pdev->dev, "Mbox response error(0x%x)\n",
843 mbox_for_resp->msg_info.status);
844 return err;
^^^Here err is a u8 so it can't be a negative error code.
845 }
846
847 if (buf_out && out_size) {
848 if (*out_size < mbox_for_resp->mbox_len) {
849 dev_err(&func_to_func->hwif->pdev->dev,
850 "Invalid response mbox message length: %d for mod %d cmd %d, should less than: %d\n",
851 mbox_for_resp->mbox_len, mod, cmd, *out_size);
852 return -EFAULT;
853 }
854
855 if (mbox_for_resp->mbox_len)
856 memcpy(buf_out, mbox_for_resp->mbox,
857 mbox_for_resp->mbox_len);
858
859 *out_size = mbox_for_resp->mbox_len;
860 }
861
862 return 0;
863 }I guess the main problem is functions like send_mbox_seg() which do:
drivers/net/ethernet/huawei/hinic/hinic_hw_mbox.c
662 static int send_mbox_seg(struct hinic_mbox_func_to_func *func_to_func,
663 u64 header, u16 dst_func, void *seg, u16 seg_len,
664 int poll, void *msg_info)
665 {
666 struct hinic_send_mbox *send_mbox = &func_to_func->send_mbox;
667 u16 seq_dir = HINIC_MBOX_HEADER_GET(header, DIRECTION);
668 struct hinic_hwdev *hwdev = func_to_func->hwdev;
669 struct completion *done = &send_mbox->send_done;
670 u8 num_aeqs = hwdev->hwif->attr.num_aeqs;
671 u16 dst_aeqn, wb_status = 0, errcode;
672
673 if (num_aeqs >= 4)
674 dst_aeqn = (seq_dir = HINIC_HWIF_DIRECT_SEND) ?
675 HINIC_MBOX_RECV_AEQN : HINIC_MBOX_RSP_AEQN;
676 else
677 dst_aeqn = 0;
678
679 if (!poll)
680 init_completion(done);
681
682 clear_mbox_status(send_mbox);
683
684 mbox_copy_header(hwdev, send_mbox, &header);
685
686 mbox_copy_send_data(hwdev, send_mbox, seg, seg_len);
687
688 write_mbox_msg_attr(func_to_func, dst_func, dst_aeqn, seg_len, poll);
689
690 wmb(); /* writing the mbox msg attributes */
691
692 if (wait_for_mbox_seg_completion(func_to_func, poll, &wb_status))
693 return -ETIMEDOUT;
694
695 if (!MBOX_STATUS_SUCCESS(wb_status)) {
696 dev_err(&hwdev->hwif->pdev->dev, "Send mailbox segment to function %d error, wb status: 0x%x\n",
697 dst_func, wb_status);
698 errcode = MBOX_STATUS_ERRCODE(wb_status);
699 return errcode ? errcode : -EFAULT;
^^^^^^^Positive error code leads to Oops.
700 }
701
702 return 0;
703 }
I'm not sure if that's every problem, but it's a start. ;)
regards,
dan carpenter
Quoted 214 lines · Dan Carpenter
Hello Luo bin,
The patch
a425b6e1c69b: "hinic: add mailbox function support" from Apr 25, 2020, leads to the following static checker warning:
drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c:817hinic_init_hwdev()
error: passing non negative 65280 toERR_PTR
drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c
716 structhinic_hwdev*hinic_init_hwdev(structpci_dev*pdev)717 { 718 struct hinic_pfhwdev *pfhwdev; 719 struct hinic_hwdev *hwdev; 720 struct hinic_hwif *hwif; 721 int err, num_aeqs; 722 723 hwif = devm_kzalloc(&pdev->dev, sizeof(*hwif), GFP_KERNEL); 724 if (!hwif) 725 return ERR_PTR(-ENOMEM); 726 727 err = hinic_init_hwif(hwif, pdev); 728 if (err) { 729 dev_err(&pdev->dev, "Failed to init HW interface\n"); 730 return ERR_PTR(err); 731 } 732 733 pfhwdev = devm_kzalloc(&pdev->dev, sizeof(*pfhwdev), GFP_KERNEL); 734 if (!pfhwdev) { 735 err = -ENOMEM; 736 goto err_pfhwdev_alloc; 737 } 738 739 hwdev = &pfhwdev->hwdev; 740 hwdev->hwif = hwif; 741 742 err = init_msix(hwdev); 743 if (err) { 744 dev_err(&pdev->dev, "Failed to init msix\n"); 745 goto err_init_msix; 746 } 747 748 err = wait_for_outbound_state(hwdev); 749 if (err) { 750 dev_warn(&pdev->dev, "outbound - disabled, try again\n"); 751 hinic_outbound_state_set(hwif, HINIC_OUTBOUND_ENABLE); 752 } 753 754 num_aeqs = HINIC_HWIF_NUM_AEQS(hwif); 755 756 err = hinic_aeqs_init(&hwdev->aeqs, hwif, num_aeqs, 757 HINIC_DEFAULT_AEQ_LEN, HINIC_EQ_PAGE_SIZE, 758 hwdev->msix_entries); 759 if (err) { 760 dev_err(&pdev->dev, "Failed to init async event queues\n"); 761 goto err_aeqs_init; 762 } 763 764 err = init_pfhwdev(pfhwdev); 765 if (err) { 766 dev_err(&pdev->dev, "Failed to init PF HW device\n"); 767 goto err_init_pfhwdev; 768 } 769 770 err = hinic_l2nic_reset(hwdev); 771 if (err) 772 goto err_l2nic_reset; 773 774 err = get_dev_cap(hwdev); ^^^^^^^^^^^^^^^^^^^^^^^^This function sometimes returns positive values on error which will lead to an Oops eventually.
775 if (err) { 776 dev_err(&pdev->dev, "Failed to get device capabilities\n"); 777 goto err_dev_cap; 778 } 779 780 err = hinic_vf_func_init(hwdev); 781 if (err) { 782 dev_err(&pdev->dev, "Failed to init nic mbox\n"); 783 goto err_vf_func_init; 784 } 785 786 err = init_fw_ctxt(hwdev); 787 if (err) { 788 dev_err(&pdev->dev, "Failed to init function table\n"); 789 goto err_init_fw_ctxt; 790 } 791 792 err = set_resources_state(hwdev, HINIC_RES_ACTIVE); ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^Same here according to Smatch.
793 if (err) { 794 dev_err(&pdev->dev, "Failed to set resources state\n"); 795 goto err_resources_state; 796 } 797 798 return hwdev; 799 800 err_resources_state: 801 err_init_fw_ctxt: 802 hinic_vf_func_free(hwdev); 803 err_vf_func_init: 804 err_l2nic_reset: 805 err_dev_cap: 806 free_pfhwdev(pfhwdev); 807 808 err_init_pfhwdev: 809 hinic_aeqs_free(&hwdev->aeqs); 810 811 err_aeqs_init: 812 disable_msix(hwdev); 813 814 err_init_msix: 815 err_pfhwdev_alloc: 816 hinic_free_hwif(hwif); 817 return ERR_PTR(err); ^^^If "err" isn't a negative error code it will lead to an Oops in the caller.
818 }One function which will cause an Oops is
mbox_resp_info_handler():
drivers/net/ethernet/huawei/hinic/hinic_hw_mbox.c
832 static int mbox_resp_info_handler(structhinic_mbox_func_to_func*func_to_func,833 struct hinic_recv_mbox *mbox_for_resp, 834 enum hinic_mod_type mod, u16 cmd, 835 void *buf_out, u16 *out_size) 836 { 837 int err; 838 839 if (mbox_for_resp->msg_info.status) { 840 err = mbox_for_resp->msg_info.status; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 841 if (err != HINIC_MBOX_PF_BUSY_ACTIVE_FW) 842 dev_err(&func_to_func->hwif->pdev->dev, "Mbox response error(0x%x)\n", 843 mbox_for_resp->msg_info.status); 844 return err; ^^^Here err is a u8 so it can't be a negative error code.
845 } 846 847 if (buf_out && out_size) { 848 if (*out_size < mbox_for_resp->mbox_len) { 849 dev_err(&func_to_func->hwif->pdev->dev, 850 "Invalid response mbox message length: %d for mod %d cmd %d, should less than: %d\n", 851 mbox_for_resp->mbox_len, mod, cmd, *out_size); 852 return -EFAULT; 853 } 854 855 if (mbox_for_resp->mbox_len) 856 memcpy(buf_out, mbox_for_resp->mbox, 857 mbox_for_resp->mbox_len); 858 859 *out_size = mbox_for_resp->mbox_len; 860 } 861 862 return 0; 863 }I guess the main problem is functions like
send_mbox_seg()which do:
drivers/net/ethernet/huawei/hinic/hinic_hw_mbox.c
662 static int send_mbox_seg(structhinic_mbox_func_to_func*func_to_func,
663 u64 header, u16dst_func, void *seg, u16seg_len,
664 int poll, void*msg_info)665 { 666 struct hinic_send_mbox *send_mbox = &func_to_func->send_mbox; 667 u16 seq_dir = HINIC_MBOX_HEADER_GET(header, DIRECTION); 668 struct hinic_hwdev *hwdev = func_to_func->hwdev; 669 struct completion *done = &send_mbox->send_done; 670 u8 num_aeqs = hwdev->hwif->attr.num_aeqs; 671 u16 dst_aeqn, wb_status = 0, errcode; 672 673 if (num_aeqs >= 4) 674 dst_aeqn = (seq_dir = HINIC_HWIF_DIRECT_SEND) ? 675 HINIC_MBOX_RECV_AEQN : HINIC_MBOX_RSP_AEQN; 676 else 677 dst_aeqn = 0; 678 679 if (!poll) 680 init_completion(done); 681 682 clear_mbox_status(send_mbox); 683 684 mbox_copy_header(hwdev, send_mbox, &header); 685 686 mbox_copy_send_data(hwdev, send_mbox, seg, seg_len); 687 688 write_mbox_msg_attr(func_to_func, dst_func, dst_aeqn, seg_len, poll); 689 690 wmb(); /* writing the mbox msg attributes */ 691 692 if (wait_for_mbox_seg_completion(func_to_func, poll, &wb_status)) 693 return -ETIMEDOUT; 694 695 if (!MBOX_STATUS_SUCCESS(wb_status)) { 696 dev_err(&hwdev->hwif->pdev->dev, "Send mailbox segment to function %d error, wb status: 0x%x\n", 697 dst_func, wb_status); 698 errcode = MBOX_STATUS_ERRCODE(wb_status); 699 return errcode ? errcode : -EFAULT; ^^^^^^^Positive error code leads to Oops.
700 } 701 702 return 0; 703 }
Quoted 6 lines
I'm not sure if that's every problem, but it's a start. ;)
regards,
dan carpenter
.
I'll fix it. Thanks for your review.