Skip to contentSkip to conversation

hinic: add some ethtool ops support

PATCH Superseded Luo bin 2 participants 12 messages Jun 23, 2020 – Jun 27, 2020

Subsystems (3)

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore

Luo bin

author
#0 lore raw

v2 cover hinic: add some ethtool ops support

patch #1: support to set and get pause params with
"ethtool -A/a" cmd
patch #2: support to set and get irq coalesce params with
"ethtool -C/c" cmd
patch #3: support to do self test with "ethtool -t" cmd patch #4: support to identify physical device with "ethtool -p" cmd patch #5: support to get eeprom information with "ethtool -m" cmd

Luo bin (5):
hinic: add support to set and get pause params
hinic: add support to set and get irq coalesce
hinic: add self test support
hinic: add support to identify physical device
hinic: add support to get eeprom information

 drivers/net/ethernet/huawei/hinic/hinic_dev.h |  14 +
 .../net/ethernet/huawei/hinic/hinic_ethtool.c | 678 +++++++++++++++++-
 .../net/ethernet/huawei/hinic/hinic_hw_dev.c  |  66 ++
 .../net/ethernet/huawei/hinic/hinic_hw_dev.h  |  31 +
 .../net/ethernet/huawei/hinic/hinic_hw_io.h   |  10 +
 .../net/ethernet/huawei/hinic/hinic_hw_mgmt.h |   7 +-
 .../net/ethernet/huawei/hinic/hinic_main.c    | 104 ++-
 .../net/ethernet/huawei/hinic/hinic_port.c    | 200 ++++++
 .../net/ethernet/huawei/hinic/hinic_port.h    |  94 +++
 drivers/net/ethernet/huawei/hinic/hinic_rx.c  |  58 +-
 .../net/ethernet/huawei/hinic/hinic_sriov.c   |   4 +-
 drivers/net/ethernet/huawei/hinic/hinic_tx.c  |  80 +++
 drivers/net/ethernet/huawei/hinic/hinic_tx.h  |   2 +
 13 files changed, 1337 insertions(+), 11 deletions(-)
Signature · 1 line
2.17.1
author
#1 lore raw

PATCH v2 1/5 hinic: add support to set and get pause params

add support to set pause params with ethtool -A and get pause params with ethtool -a. Also remove set_link_ksettings ops for VF and enable pause by default.

---
 .../net/ethernet/huawei/hinic/hinic_ethtool.c | 96 ++++++++++++++++++-
 .../net/ethernet/huawei/hinic/hinic_hw_dev.c  |  2 +
 .../net/ethernet/huawei/hinic/hinic_hw_dev.h  |  2 +
 .../net/ethernet/huawei/hinic/hinic_hw_io.h   | 10 ++
 .../net/ethernet/huawei/hinic/hinic_main.c    | 48 ++++++++--
 .../net/ethernet/huawei/hinic/hinic_port.c    | 40 ++++++++
 .../net/ethernet/huawei/hinic/hinic_port.h    | 13 +++
 7 files changed, 204 insertions(+), 7 deletions(-)
drivers/net/ethernet/huawei/hinic/hinic_ethtool.c +95 -1
index efb02e03e7da..c2afa0585dbf 100644
@@ -613,6 +613,74 @@ static int hinic_set_ringparam(struct net_device *netdev,
 
 	return 0;
 }
+
+static void hinic_get_pauseparam(struct net_device *netdev,
+				 struct ethtool_pauseparam *pause)
+{
+	struct hinic_dev *nic_dev = netdev_priv(netdev);
+	struct hinic_pause_config pause_info = {0};
+	struct hinic_nic_cfg *nic_cfg;
+	int err;
+
+	nic_cfg = &nic_dev->hwdev->func_to_io.nic_cfg;
+
+	err = hinic_get_hw_pause_info(nic_dev->hwdev, &pause_info);
+	if (err) {
+		netif_err(nic_dev, drv, netdev,
+			  "Failed to get pauseparam from hw\n");
+	} else {
+		pause->autoneg = pause_info.auto_neg;
+		if (nic_cfg->pause_set || !pause_info.auto_neg) {
+			pause->rx_pause = nic_cfg->rx_pause;
+			pause->tx_pause = nic_cfg->tx_pause;
+		} else {
+			pause->rx_pause = pause_info.rx_pause;
+			pause->tx_pause = pause_info.tx_pause;
+		}
+	}
+}
+
+static int hinic_set_pauseparam(struct net_device *netdev,
+				struct ethtool_pauseparam *pause)
+{
+	struct hinic_dev *nic_dev = netdev_priv(netdev);
+	struct hinic_pause_config pause_info = {0};
+	struct hinic_port_cap port_cap = {0};
+	int err;
+
+	err = hinic_port_get_cap(nic_dev, &port_cap);
+	if (err) {
+		netif_err(nic_dev, drv, netdev,
+			  "Failed to get port capability\n");
+		return -EIO;
+	}
+
+	if (pause->autoneg != port_cap.autoneg_state) {
+		netif_err(nic_dev, drv, netdev,
+			  "To change autoneg please use: ethtool -s <dev> autoneg <on|off>\n");
+		return -EOPNOTSUPP;
+	}
+
+	pause_info.auto_neg = pause->autoneg;
+	pause_info.rx_pause = pause->rx_pause;
+	pause_info.tx_pause = pause->tx_pause;
+
+	mutex_lock(&nic_dev->hwdev->func_to_io.nic_cfg.cfg_mutex);
+	err = hinic_set_hw_pause_info(nic_dev->hwdev, &pause_info);
+	if (err) {
+		netif_err(nic_dev, drv, netdev, "Failed to set pauseparam\n");
+		mutex_unlock(&nic_dev->hwdev->func_to_io.nic_cfg.cfg_mutex);
+		return err;
+	}
+	nic_dev->hwdev->func_to_io.nic_cfg.pause_set = true;
+	nic_dev->hwdev->func_to_io.nic_cfg.auto_neg = pause->autoneg;
+	nic_dev->hwdev->func_to_io.nic_cfg.rx_pause = pause->rx_pause;
+	nic_dev->hwdev->func_to_io.nic_cfg.tx_pause = pause->tx_pause;
+	mutex_unlock(&nic_dev->hwdev->func_to_io.nic_cfg.cfg_mutex);
+
+	return 0;
+}
+
 static void hinic_get_channels(struct net_device *netdev,
 			       struct ethtool_channels *channels)
 {
@@ -1241,6 +1309,27 @@ static const struct ethtool_ops hinic_ethtool_ops = {
 	.get_link = ethtool_op_get_link,
 	.get_ringparam = hinic_get_ringparam,
 	.set_ringparam = hinic_set_ringparam,
+	.get_pauseparam = hinic_get_pauseparam,
+	.set_pauseparam = hinic_set_pauseparam,
+	.get_channels = hinic_get_channels,
+	.set_channels = hinic_set_channels,
+	.get_rxnfc = hinic_get_rxnfc,
+	.set_rxnfc = hinic_set_rxnfc,
+	.get_rxfh_key_size = hinic_get_rxfh_key_size,
+	.get_rxfh_indir_size = hinic_get_rxfh_indir_size,
+	.get_rxfh = hinic_get_rxfh,
+	.set_rxfh = hinic_set_rxfh,
+	.get_sset_count = hinic_get_sset_count,
+	.get_ethtool_stats = hinic_get_ethtool_stats,
+	.get_strings = hinic_get_strings,
+};
+
+static const struct ethtool_ops hinicvf_ethtool_ops = {
+	.get_link_ksettings = hinic_get_link_ksettings,
+	.get_drvinfo = hinic_get_drvinfo,
+	.get_link = ethtool_op_get_link,
+	.get_ringparam = hinic_get_ringparam,
+	.set_ringparam = hinic_set_ringparam,
 	.get_channels = hinic_get_channels,
 	.set_channels = hinic_set_channels,
 	.get_rxnfc = hinic_get_rxnfc,
@@ -1256,5 +1345,10 @@ static const struct ethtool_ops hinic_ethtool_ops = {
 
 void hinic_set_ethtool_ops(struct net_device *netdev)
 {
-	netdev->ethtool_ops = &hinic_ethtool_ops;
+	struct hinic_dev *nic_dev = netdev_priv(netdev);
+
+	if (!HINIC_IS_VF(nic_dev->hwdev->hwif))
+		netdev->ethtool_ops = &hinic_ethtool_ops;
+	else
+		netdev->ethtool_ops = &hinicvf_ethtool_ops;
 }
drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c +2 -0
index 0245da02efbb..747d50b841ba 100644
@@ -777,6 +777,8 @@ struct hinic_hwdev *hinic_init_hwdev(struct pci_dev *pdev)
 		goto err_dev_cap;
 	}
 
+	mutex_init(&hwdev->func_to_io.nic_cfg.cfg_mutex);
+
 	err = hinic_vf_func_init(hwdev);
 	if (err) {
 		dev_err(&pdev->dev, "Failed to init nic mbox\n");
drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h +2 -0
index 71ea7e46dbbc..cc776ca2d737 100644
@@ -48,6 +48,8 @@ enum hinic_port_cmd {
 	HINIC_PORT_CMD_ADD_VLAN         = 3,
 	HINIC_PORT_CMD_DEL_VLAN         = 4,
 
+	HINIC_PORT_CMD_SET_PFC		= 5,
+
 	HINIC_PORT_CMD_SET_MAC          = 9,
 	HINIC_PORT_CMD_GET_MAC          = 10,
 	HINIC_PORT_CMD_DEL_MAC          = 11,
drivers/net/ethernet/huawei/hinic/hinic_hw_io.h +10 -0
index 214f162f7579..ee6d60762d84 100644
@@ -47,6 +47,15 @@ struct hinic_free_db_area {
 	struct semaphore        idx_lock;
 };
 
+struct hinic_nic_cfg {
+	/* lock for getting nic cfg */
+	struct mutex		cfg_mutex;
+	bool			pause_set;
+	u32			auto_neg;
+	u32			rx_pause;
+	u32			tx_pause;
+};
+
 struct hinic_func_to_io {
 	struct hinic_hwif       *hwif;
 	struct hinic_hwdev      *hwdev;
@@ -78,6 +87,7 @@ struct hinic_func_to_io {
 	u16			max_vfs;
 	struct vf_data_storage	*vf_infos;
 	u8			link_status;
+	struct hinic_nic_cfg	nic_cfg;
 };
 
 struct hinic_wq_page_size {
drivers/net/ethernet/huawei/hinic/hinic_main.c +42 -6

100 lines not on this page · raw message

drivers/net/ethernet/huawei/hinic/hinic_port.c +40 -0
index 175c0ee00038..8b007a268675 100644
@@ -1082,6 +1082,7 @@ int hinic_get_link_mode(struct hinic_hwdev *hwdev,
 	if (!hwdev || !link_mode)
 		return -EINVAL;
 
+	link_mode->func_id = HINIC_HWIF_FUNC_IDX(hwdev->hwif);
 	out_size = sizeof(*link_mode);
 
 	err = hinic_port_msg_cmd(hwdev, HINIC_PORT_CMD_GET_LINK_MODE,
@@ -1172,6 +1173,8 @@ int hinic_get_hw_pause_info(struct hinic_hwdev *hwdev,
 	u16 out_size = sizeof(*pause_info);
 	int err;
 
+	pause_info->func_id = HINIC_HWIF_FUNC_IDX(hwdev->hwif);
+
 	err = hinic_port_msg_cmd(hwdev, HINIC_PORT_CMD_GET_PAUSE_INFO,
 				 pause_info, sizeof(*pause_info),
 				 pause_info, &out_size);
@@ -1190,6 +1193,8 @@ int hinic_set_hw_pause_info(struct hinic_hwdev *hwdev,
 	u16 out_size = sizeof(*pause_info);
 	int err;
 
+	pause_info->func_id = HINIC_HWIF_FUNC_IDX(hwdev->hwif);
+
 	err = hinic_port_msg_cmd(hwdev, HINIC_PORT_CMD_SET_PAUSE_INFO,
 				 pause_info, sizeof(*pause_info),
 				 pause_info, &out_size);
@@ -1201,3 +1206,38 @@ int hinic_set_hw_pause_info(struct hinic_hwdev *hwdev,
 
 	return 0;
 }
+
+int hinic_dcb_set_pfc(struct hinic_hwdev *hwdev, u8 pfc_en, u8 pfc_bitmap)
+{
+	struct hinic_nic_cfg *nic_cfg = &hwdev->func_to_io.nic_cfg;
+	struct hinic_set_pfc pfc = {0};
+	u16 out_size = sizeof(pfc);
+	int err;
+
+	if (HINIC_IS_VF(hwdev->hwif))
+		return 0;
+
+	mutex_lock(&nic_cfg->cfg_mutex);
+
+	pfc.func_id = HINIC_HWIF_FUNC_IDX(hwdev->hwif);
+	pfc.pfc_bitmap = pfc_bitmap;
+	pfc.pfc_en = pfc_en;
+
+	err = hinic_port_msg_cmd(hwdev, HINIC_PORT_CMD_SET_PFC,
+				 &pfc, sizeof(pfc), &pfc, &out_size);
+	if (err || pfc.status || !out_size) {
+		dev_err(&hwdev->hwif->pdev->dev, "Failed to %s pfc, err: %d, status: 0x%x, out size: 0x%x\n",
+			pfc_en ? "enable" : "disable", err, pfc.status,
+			out_size);
+		mutex_unlock(&nic_cfg->cfg_mutex);
+		return -EIO;
+	}
+
+	/* pause settings is opposite from pfc */
+	nic_cfg->rx_pause = pfc_en ? 0 : 1;
+	nic_cfg->tx_pause = pfc_en ? 0 : 1;
+
+	mutex_unlock(&nic_cfg->cfg_mutex);
+
+	return 0;
+}
drivers/net/ethernet/huawei/hinic/hinic_port.h +13 -0
index 661c6322dc15..7b17460d4e2c 100644
@@ -641,6 +641,17 @@ struct hinic_pause_config {
 	u32	tx_pause;
 };
 
+struct hinic_set_pfc {
+	u8	status;
+	u8	version;
+	u8	rsvd0[6];
+
+	u16	func_id;
+	u8	pfc_en;
+	u8	pfc_bitmap;
+	u8	rsvd1[4];
+};
+
 int hinic_port_add_mac(struct hinic_dev *nic_dev, const u8 *addr,
 		       u16 vlan_id);
 
@@ -736,6 +747,8 @@ int hinic_get_hw_pause_info(struct hinic_hwdev *hwdev,
 int hinic_set_hw_pause_info(struct hinic_hwdev *hwdev,
 			    struct hinic_pause_config *pause_info);
 
+int hinic_dcb_set_pfc(struct hinic_hwdev *hwdev, u8 pfc_en, u8 pfc_bitmap);
+
 int hinic_open(struct net_device *netdev);
 
 int hinic_close(struct net_device *netdev);
Signature · 1 line
2.17.1
author
#9 lore raw

PATCH v2 5/5 hinic: add support to get eeprom information

In reply to Luo bin

add support to get eeprom information from the plug-in module with ethtool -m cmd.

---
 .../net/ethernet/huawei/hinic/hinic_ethtool.c | 69 +++++++++++++++++
 .../net/ethernet/huawei/hinic/hinic_hw_dev.h  |  4 +
 .../net/ethernet/huawei/hinic/hinic_port.c    | 75 +++++++++++++++++++
 .../net/ethernet/huawei/hinic/hinic_port.h    | 30 ++++++++
 4 files changed, 178 insertions(+)
drivers/net/ethernet/huawei/hinic/hinic_ethtool.c +69 -0
index 770d548d0f99..66538e0c15eb 100644
@@ -25,6 +25,7 @@
 #include <linux/if_vlan.h>
 #include <linux/ethtool.h>
 #include <linux/vmalloc.h>
+#include <linux/sfp.h>
 
 #include "hinic_hw_qp.h"
 #include "hinic_hw_dev.h"
@@ -1795,6 +1796,72 @@ static int hinic_set_phys_id(struct net_device *netdev,
 	return err;
 }
 
+static int hinic_get_module_info(struct net_device *netdev,
+				 struct ethtool_modinfo *modinfo)
+{
+	struct hinic_dev *nic_dev = netdev_priv(netdev);
+	u8 sfp_type_ext;
+	u8 sfp_type;
+	int err;
+
+	err = hinic_get_sfp_type(nic_dev->hwdev, &sfp_type, &sfp_type_ext);
+	if (err)
+		return err;
+
+	switch (sfp_type) {
+	case SFF8024_ID_SFP:
+		modinfo->type = ETH_MODULE_SFF_8472;
+		modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
+		break;
+	case SFF8024_ID_QSFP_8438:
+		modinfo->type = ETH_MODULE_SFF_8436;
+		modinfo->eeprom_len = ETH_MODULE_SFF_8436_MAX_LEN;
+		break;
+	case SFF8024_ID_QSFP_8436_8636:
+		if (sfp_type_ext >= 0x3) {
+			modinfo->type = ETH_MODULE_SFF_8636;
+			modinfo->eeprom_len = ETH_MODULE_SFF_8636_MAX_LEN;
+
+		} else {
+			modinfo->type = ETH_MODULE_SFF_8436;
+			modinfo->eeprom_len = ETH_MODULE_SFF_8436_MAX_LEN;
+		}
+		break;
+	case SFF8024_ID_QSFP28_8636:
+		modinfo->type = ETH_MODULE_SFF_8636;
+		modinfo->eeprom_len = ETH_MODULE_SFF_8636_MAX_LEN;
+		break;
+	default:
+		netif_warn(nic_dev, drv, netdev,
+			   "Optical module unknown: 0x%x\n", sfp_type);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int hinic_get_module_eeprom(struct net_device *netdev,
+				   struct ethtool_eeprom *ee, u8 *data)
+{
+	struct hinic_dev *nic_dev = netdev_priv(netdev);
+	u8 sfp_data[STD_SFP_INFO_MAX_SIZE];
+	u16 len;
+	int err;
+
+	if (!ee->len || ((ee->len + ee->offset) > STD_SFP_INFO_MAX_SIZE))
+		return -EINVAL;
+
+	memset(data, 0, ee->len);
+
+	err = hinic_get_sfp_eeprom(nic_dev->hwdev, sfp_data, &len);
+	if (err)
+		return err;
+
+	memcpy(data, sfp_data + ee->offset, ee->len);
+
+	return 0;
+}
+
 static const struct ethtool_ops hinic_ethtool_ops = {
 	.supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS |
 				     ETHTOOL_COALESCE_RX_MAX_FRAMES |
@@ -1826,6 +1893,8 @@ static const struct ethtool_ops hinic_ethtool_ops = {
 	.get_strings = hinic_get_strings,
 	.self_test = hinic_diag_test,
 	.set_phys_id = hinic_set_phys_id,
+	.get_module_info = hinic_get_module_info,
+	.get_module_eeprom = hinic_get_module_eeprom,
 };
 
 static const struct ethtool_ops hinicvf_ethtool_ops = {
drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h +4 -0
index 01fe94f2d4bc..958ea1a6a60d 100644
@@ -130,9 +130,13 @@ enum hinic_port_cmd {
 
 	HINIC_PORT_CMD_SET_AUTONEG	= 219,
 
+	HINIC_PORT_CMD_GET_STD_SFP_INFO = 240,
+
 	HINIC_PORT_CMD_SET_LRO_TIMER	= 244,
 
 	HINIC_PORT_CMD_SET_VF_MAX_MIN_RATE = 249,
+
+	HINIC_PORT_CMD_GET_SFP_ABS	= 251,
 };
 
 /* cmd of mgmt CPU message for HILINK module */
drivers/net/ethernet/huawei/hinic/hinic_port.c +75 -0

78 lines not on this page · raw message

drivers/net/ethernet/huawei/hinic/hinic_port.h +30 -0
index 5c916875f295..0e444d2c02bb 100644
@@ -677,6 +677,32 @@ struct hinic_led_info {
 	u8	reset;
 };
 
+#define STD_SFP_INFO_MAX_SIZE	640
+
+struct hinic_cmd_get_light_module_abs {
+	u8 status;
+	u8 version;
+	u8 rsvd0[6];
+
+	u8 port_id;
+	u8 abs_status; /* 0:present, 1:absent */
+	u8 rsv[2];
+};
+
+#define STD_SFP_INFO_MAX_SIZE	640
+
+struct hinic_cmd_get_std_sfp_info {
+	u8 status;
+	u8 version;
+	u8 rsvd0[6];
+
+	u8 port_id;
+	u8 wire_type;
+	u16 eeprom_len;
+	u32 rsvd;
+	u8 sfp_info[STD_SFP_INFO_MAX_SIZE];
+};
+
 int hinic_port_add_mac(struct hinic_dev *nic_dev, const u8 *addr,
 		       u16 vlan_id);
 
@@ -800,6 +826,10 @@ int hinic_reset_led_status(struct hinic_hwdev *hwdev, u8 port);
 int hinic_set_led_status(struct hinic_hwdev *hwdev, u8 port,
 			 enum hinic_led_type type, enum hinic_led_mode mode);
 
+int hinic_get_sfp_type(struct hinic_hwdev *hwdev, u8 *data0, u8 *data1);
+
+int hinic_get_sfp_eeprom(struct hinic_hwdev *hwdev, u8 *data, u16 *len);
+
 int hinic_open(struct net_device *netdev);
 
 int hinic_close(struct net_device *netdev);
Signature · 1 line
2.17.1
author
#4 lore raw

PATCH v2 2/5 hinic: add support to set and get irq coalesce

In reply to Luo bin

add support to set TX/RX irq coalesce params with ethtool -C and get these params with ethtool -c.

---
 drivers/net/ethernet/huawei/hinic/hinic_dev.h |   8 +
 .../net/ethernet/huawei/hinic/hinic_ethtool.c | 294 ++++++++++++++++++
 .../net/ethernet/huawei/hinic/hinic_hw_dev.c  |  62 ++++
 .../net/ethernet/huawei/hinic/hinic_hw_dev.h  |  21 ++
 .../net/ethernet/huawei/hinic/hinic_hw_mgmt.h |   3 +
 .../net/ethernet/huawei/hinic/hinic_main.c    |  56 ++++
 drivers/net/ethernet/huawei/hinic/hinic_rx.c  |  19 +-
 drivers/net/ethernet/huawei/hinic/hinic_tx.c  |  19 ++
 8 files changed, 481 insertions(+), 1 deletion(-)
drivers/net/ethernet/huawei/hinic/hinic_dev.h +8 -0
index 48b40be3e84d..75d6dee948f5 100644
@@ -49,6 +49,12 @@ enum hinic_rss_hash_type {
 	HINIC_RSS_HASH_ENGINE_TYPE_MAX,
 };
 
+struct hinic_intr_coal_info {
+	u8	pending_limt;
+	u8	coalesce_timer_cfg;
+	u8	resend_timer_cfg;
+};
+
 struct hinic_dev {
 	struct net_device               *netdev;
 	struct hinic_hwdev              *hwdev;
@@ -82,6 +88,8 @@ struct hinic_dev {
 	struct hinic_rss_type		rss_type;
 	u8				*rss_hkey_user;
 	s32				*rss_indir_user;
+	struct hinic_intr_coal_info	*rx_intr_coalesce;
+	struct hinic_intr_coal_info	*tx_intr_coalesce;
 	struct hinic_sriov_info sriov_info;
 };
 
drivers/net/ethernet/huawei/hinic/hinic_ethtool.c +294 -0

329 lines not on this page · raw message

drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c +62 -0

68 lines not on this page · raw message

drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h +21 -0
index cc776ca2d737..ed3cc154ce18 100644
@@ -285,6 +285,21 @@ struct hinic_cmd_l2nic_reset {
 	u16	reset_flag;
 };
 
+struct hinic_msix_config {
+	u8	status;
+	u8	version;
+	u8	rsvd0[6];
+
+	u16	func_id;
+	u16	msix_index;
+	u8	pending_cnt;
+	u8	coalesce_timer_cnt;
+	u8	lli_timer_cnt;
+	u8	lli_credit_cnt;
+	u8	resend_timer_cnt;
+	u8	rsvd1[3];
+};
+
 struct hinic_hwdev {
 	struct hinic_hwif               *hwif;
 	struct msix_entry               *msix_entries;
@@ -378,4 +393,10 @@ int hinic_hwdev_hw_ci_addr_set(struct hinic_hwdev *hwdev, struct hinic_sq *sq,
 void hinic_hwdev_set_msix_state(struct hinic_hwdev *hwdev, u16 msix_index,
 				enum hinic_msix_state flag);
 
+int hinic_get_interrupt_cfg(struct hinic_hwdev *hwdev,
+			    struct hinic_msix_config *interrupt_info);
+
+int hinic_set_interrupt_cfg(struct hinic_hwdev *hwdev,
+			    struct hinic_msix_config *interrupt_info);
+
 #endif
drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.h +3 -0
index c2b142c08b0e..a3349ae30ff3 100644
@@ -78,6 +78,9 @@ enum hinic_comm_cmd {
 
 	HINIC_COMM_CMD_CEQ_CTRL_REG_WR_BY_UP = 0x33,
 
+	HINIC_COMM_CMD_MSI_CTRL_REG_WR_BY_UP,
+	HINIC_COMM_CMD_MSI_CTRL_REG_RD_BY_UP,
+
 	HINIC_COMM_CMD_L2NIC_RESET		= 0x4b,
 
 	HINIC_COMM_CMD_PAGESIZE_SET	= 0x50,
drivers/net/ethernet/huawei/hinic/hinic_main.c +56 -0

86 lines not on this page · raw message

drivers/net/ethernet/huawei/hinic/hinic_rx.c +18 -1
index af20d0dd6de7..c9a65a1f0347 100644
@@ -478,11 +478,15 @@ static irqreturn_t rx_irq(int irq, void *data)
 static int rx_request_irq(struct hinic_rxq *rxq)
 {
 	struct hinic_dev *nic_dev = netdev_priv(rxq->netdev);
+	struct hinic_msix_config interrupt_info = {0};
+	struct hinic_intr_coal_info *intr_coal = NULL;
 	struct hinic_hwdev *hwdev = nic_dev->hwdev;
 	struct hinic_rq *rq = rxq->rq;
 	struct hinic_qp *qp;
 	int err;
 
+	qp = container_of(rq, struct hinic_qp, rq);
+
 	rx_add_napi(rxq);
 
 	hinic_hwdev_msix_set(hwdev, rq->msix_entry,
@@ -490,13 +494,26 @@ static int rx_request_irq(struct hinic_rxq *rxq)
 			     RX_IRQ_NO_LLI_TIMER, RX_IRQ_NO_CREDIT,
 			     RX_IRQ_NO_RESEND_TIMER);
 
+	intr_coal = &nic_dev->rx_intr_coalesce[qp->q_id];
+	interrupt_info.msix_index = rq->msix_entry;
+	interrupt_info.coalesce_timer_cnt = intr_coal->coalesce_timer_cfg;
+	interrupt_info.pending_cnt = intr_coal->pending_limt;
+	interrupt_info.resend_timer_cnt = intr_coal->resend_timer_cfg;
+
+	err = hinic_set_interrupt_cfg(hwdev, &interrupt_info);
+	if (err) {
+		netif_err(nic_dev, drv, rxq->netdev,
+			  "Failed to set RX interrupt coalescing attribute\n");
+		rx_del_napi(rxq);
+		return err;
+	}
+
 	err = request_irq(rq->irq, rx_irq, 0, rxq->irq_name, rxq);
 	if (err) {
 		rx_del_napi(rxq);
 		return err;
 	}
 
-	qp = container_of(rq, struct hinic_qp, rq);
 	cpumask_set_cpu(qp->q_id % num_online_cpus(), &rq->affinity_mask);
 	return irq_set_affinity_hint(rq->irq, &rq->affinity_mask);
 }
drivers/net/ethernet/huawei/hinic/hinic_tx.c +19 -0
index 4c66a0bc1b28..0f6d27f29de5 100644
@@ -718,12 +718,17 @@ static irqreturn_t tx_irq(int irq, void *data)
 static int tx_request_irq(struct hinic_txq *txq)
 {
 	struct hinic_dev *nic_dev = netdev_priv(txq->netdev);
+	struct hinic_msix_config interrupt_info = {0};
+	struct hinic_intr_coal_info *intr_coal = NULL;
 	struct hinic_hwdev *hwdev = nic_dev->hwdev;
 	struct hinic_hwif *hwif = hwdev->hwif;
 	struct pci_dev *pdev = hwif->pdev;
 	struct hinic_sq *sq = txq->sq;
+	struct hinic_qp *qp;
 	int err;
 
+	qp = container_of(sq, struct hinic_qp, sq);
+
 	tx_napi_add(txq, nic_dev->tx_weight);
 
 	hinic_hwdev_msix_set(nic_dev->hwdev, sq->msix_entry,
@@ -731,6 +736,20 @@ static int tx_request_irq(struct hinic_txq *txq)
 			     TX_IRQ_NO_LLI_TIMER, TX_IRQ_NO_CREDIT,
 			     TX_IRQ_NO_RESEND_TIMER);
 
+	intr_coal = &nic_dev->tx_intr_coalesce[qp->q_id];
+	interrupt_info.msix_index = sq->msix_entry;
+	interrupt_info.coalesce_timer_cnt = intr_coal->coalesce_timer_cfg;
+	interrupt_info.pending_cnt = intr_coal->pending_limt;
+	interrupt_info.resend_timer_cnt = intr_coal->resend_timer_cfg;
+
+	err = hinic_set_interrupt_cfg(hwdev, &interrupt_info);
+	if (err) {
+		netif_err(nic_dev, drv, txq->netdev,
+			  "Failed to set TX interrupt coalescing attribute\n");
+		tx_napi_del(txq);
+		return err;
+	}
+
 	err = request_irq(sq->irq, tx_irq, 0, txq->irq_name, txq);
 	if (err) {
 		dev_err(&pdev->dev, "Failed to request Tx irq\n");
Signature · 1 line
2.17.1
author
#6 lore raw

PATCH v2 3/5 hinic: add self test support

In reply to Luo bin

add support to excute internal and external loopback test with ethtool -t cmd.

---
 drivers/net/ethernet/huawei/hinic/hinic_dev.h |   6 +
 .../net/ethernet/huawei/hinic/hinic_ethtool.c | 178 ++++++++++++++++++
 .../net/ethernet/huawei/hinic/hinic_hw_dev.h  |   3 +
 .../net/ethernet/huawei/hinic/hinic_port.c    |  30 +++
 .../net/ethernet/huawei/hinic/hinic_port.h    |  16 ++
 drivers/net/ethernet/huawei/hinic/hinic_rx.c  |  39 ++++
 drivers/net/ethernet/huawei/hinic/hinic_tx.c  |  61 ++++++
 drivers/net/ethernet/huawei/hinic/hinic_tx.h  |   2 +
 8 files changed, 335 insertions(+)
drivers/net/ethernet/huawei/hinic/hinic_dev.h +6 -0
index 75d6dee948f5..9adb755f0820 100644
@@ -20,11 +20,14 @@
 
 #define HINIC_DRV_NAME          "hinic"
 
+#define LP_PKT_CNT		64
+
 enum hinic_flags {
 	HINIC_LINK_UP = BIT(0),
 	HINIC_INTF_UP = BIT(1),
 	HINIC_RSS_ENABLE = BIT(2),
 	HINIC_LINK_DOWN = BIT(3),
+	HINIC_LP_TEST = BIT(4),
 };
 
 struct hinic_rx_mode_work {
@@ -91,6 +94,9 @@ struct hinic_dev {
 	struct hinic_intr_coal_info	*rx_intr_coalesce;
 	struct hinic_intr_coal_info	*tx_intr_coalesce;
 	struct hinic_sriov_info sriov_info;
+	int				lb_test_rx_idx;
+	int				lb_pkt_len;
+	u8				*lb_test_rx_buf;
 };
 
 #endif
drivers/net/ethernet/huawei/hinic/hinic_ethtool.c +178 -0

214 lines not on this page · raw message

drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h +3 -0
index ed3cc154ce18..c92c39a50b81 100644
@@ -97,6 +97,9 @@ enum hinic_port_cmd {
 
 	HINIC_PORT_CMD_FWCTXT_INIT      = 69,
 
+	HINIC_PORT_CMD_GET_LOOPBACK_MODE = 72,
+	HINIC_PORT_CMD_SET_LOOPBACK_MODE,
+
 	HINIC_PORT_CMD_ENABLE_SPOOFCHK = 78,
 
 	HINIC_PORT_CMD_GET_MGMT_VERSION = 88,
drivers/net/ethernet/huawei/hinic/hinic_port.c +30 -0
index 8b007a268675..53ea2740ba9f 100644
@@ -1241,3 +1241,33 @@ int hinic_dcb_set_pfc(struct hinic_hwdev *hwdev, u8 pfc_en, u8 pfc_bitmap)
 
 	return 0;
 }
+
+int hinic_set_loopback_mode(struct hinic_hwdev *hwdev, u32 mode, u32 enable)
+{
+	struct hinic_port_loopback lb = {0};
+	u16 out_size = sizeof(lb);
+	int err;
+
+	lb.mode = mode;
+	lb.en = enable;
+
+	if (mode < LOOP_MODE_MIN || mode > LOOP_MODE_MAX) {
+		dev_err(&hwdev->hwif->pdev->dev,
+			"Invalid loopback mode %d to set\n", mode);
+		return -EINVAL;
+	}
+
+	err = hinic_port_msg_cmd(hwdev, HINIC_PORT_CMD_SET_LOOPBACK_MODE,
+				 &lb, sizeof(lb), &lb, &out_size);
+	if (err || !out_size || lb.status) {
+		dev_err(&hwdev->hwif->pdev->dev,
+			"Failed to set loopback mode %d en %d, err: %d, status: 0x%x, out size: 0x%x\n",
+			mode, enable, err, lb.status, out_size);
+		return -EIO;
+	}
+
+	dev_info(&hwdev->hwif->pdev->dev,
+		 "Set loopback mode %d en %d succeed\n", mode, enable);
+
+	return 0;
+}
drivers/net/ethernet/huawei/hinic/hinic_port.h +16 -0
index 7b17460d4e2c..b21956d7232e 100644
@@ -652,6 +652,20 @@ struct hinic_set_pfc {
 	u8	rsvd1[4];
 };
 
+/* get or set loopback mode, need to modify by base API */
+#define HINIC_INTERNAL_LP_MODE			5
+#define LOOP_MODE_MIN				1
+#define LOOP_MODE_MAX				6
+
+struct hinic_port_loopback {
+	u8	status;
+	u8	version;
+	u8	rsvd[6];
+
+	u32	mode;
+	u32	en;
+};
+
 int hinic_port_add_mac(struct hinic_dev *nic_dev, const u8 *addr,
 		       u16 vlan_id);
 
@@ -749,6 +763,8 @@ int hinic_set_hw_pause_info(struct hinic_hwdev *hwdev,
 
 int hinic_dcb_set_pfc(struct hinic_hwdev *hwdev, u8 pfc_en, u8 pfc_bitmap);
 
+int hinic_set_loopback_mode(struct hinic_hwdev *hwdev, u32 mode, u32 enable);
+
 int hinic_open(struct net_device *netdev);
 
 int hinic_close(struct net_device *netdev);
drivers/net/ethernet/huawei/hinic/hinic_rx.c +39 -0
index c9a65a1f0347..5bee951fe9d4 100644
@@ -316,6 +316,39 @@ static int rx_recv_jumbo_pkt(struct hinic_rxq *rxq, struct sk_buff *head_skb,
 	return num_wqes;
 }
 
+static void hinic_copy_lp_data(struct hinic_dev *nic_dev,
+			       struct sk_buff *skb)
+{
+	struct net_device *netdev = nic_dev->netdev;
+	u8 *lb_buf = nic_dev->lb_test_rx_buf;
+	int lb_len = nic_dev->lb_pkt_len;
+	int pkt_offset, frag_len, i;
+	void *frag_data = NULL;
+
+	if (nic_dev->lb_test_rx_idx == LP_PKT_CNT) {
+		nic_dev->lb_test_rx_idx = 0;
+		netif_warn(nic_dev, drv, netdev, "Loopback test warning, receive too more test pkts\n");
+	}
+
+	if (skb->len != nic_dev->lb_pkt_len) {
+		netif_warn(nic_dev, drv, netdev, "Wrong packet length\n");
+		nic_dev->lb_test_rx_idx++;
+		return;
+	}
+
+	pkt_offset = nic_dev->lb_test_rx_idx * lb_len;
+	frag_len = (int)skb_headlen(skb);
+	memcpy(lb_buf + pkt_offset, skb->data, frag_len);
+	pkt_offset += frag_len;
+	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+		frag_data = skb_frag_address(&skb_shinfo(skb)->frags[i]);
+		frag_len = (int)skb_frag_size(&skb_shinfo(skb)->frags[i]);
+		memcpy((lb_buf + pkt_offset), frag_data, frag_len);
+		pkt_offset += frag_len;
+	}
+	nic_dev->lb_test_rx_idx++;
+}
+
 /**
  * rxq_recv - Rx handler
  * @rxq: rx queue
@@ -330,6 +363,7 @@ static int rxq_recv(struct hinic_rxq *rxq, int budget)
 	u64 pkt_len = 0, rx_bytes = 0;
 	struct hinic_rq *rq = rxq->rq;
 	struct hinic_rq_wqe *rq_wqe;
+	struct hinic_dev *nic_dev;
 	unsigned int free_wqebbs;
 	struct hinic_rq_cqe *cqe;
 	int num_wqes, pkts = 0;
@@ -342,6 +376,8 @@ static int rxq_recv(struct hinic_rxq *rxq, int budget)
 	u32 vlan_len;
 	u16 vid;
 
+	nic_dev = netdev_priv(netdev);
+
 	while (pkts < budget) {
 		num_wqes = 0;
 
@@ -384,6 +420,9 @@ static int rxq_recv(struct hinic_rxq *rxq, int budget)
 			__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vid);
 		}
 
+		if (unlikely(nic_dev->flags & HINIC_LP_TEST))
+			hinic_copy_lp_data(nic_dev, skb);
+
 		skb_record_rx_queue(skb, qp->q_id);
 		skb->protocol = eth_type_trans(skb, rxq->netdev);
 
drivers/net/ethernet/huawei/hinic/hinic_tx.c +61 -0

67 lines not on this page · raw message

drivers/net/ethernet/huawei/hinic/hinic_tx.h +2 -0
index f158b7db7fb8..b3c8657774a7 100644
@@ -44,6 +44,8 @@ void hinic_txq_clean_stats(struct hinic_txq *txq);
 
 void hinic_txq_get_stats(struct hinic_txq *txq, struct hinic_txq_stats *stats);
 
+netdev_tx_t hinic_lb_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
+
 netdev_tx_t hinic_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
 
 int hinic_init_txq(struct hinic_txq *txq, struct hinic_sq *sq,
Signature · 1 line
2.17.1
author
#7 lore raw

PATCH v2 4/5 hinic: add support to identify physical device

In reply to Luo bin

add support to identify physical device by flashing an LED attached to it with ethtool -p cmd.

---
 .../net/ethernet/huawei/hinic/hinic_ethtool.c | 41 ++++++++++++++
 .../net/ethernet/huawei/hinic/hinic_hw_dev.c  |  2 +
 .../net/ethernet/huawei/hinic/hinic_hw_dev.h  |  1 +
 .../net/ethernet/huawei/hinic/hinic_hw_mgmt.h |  4 +-
 .../net/ethernet/huawei/hinic/hinic_port.c    | 55 +++++++++++++++++++
 .../net/ethernet/huawei/hinic/hinic_port.h    | 35 ++++++++++++
 .../net/ethernet/huawei/hinic/hinic_sriov.c   |  4 +-
 7 files changed, 139 insertions(+), 3 deletions(-)
drivers/net/ethernet/huawei/hinic/hinic_ethtool.c +41 -0
index 724800a440fc..770d548d0f99 100644
@@ -1755,6 +1755,46 @@ static void hinic_diag_test(struct net_device *netdev,
 		netif_carrier_on(netdev);
 }
 
+static int hinic_set_phys_id(struct net_device *netdev,
+			     enum ethtool_phys_id_state state)
+{
+	struct hinic_dev *nic_dev = netdev_priv(netdev);
+	int err = 0;
+	u8 port;
+
+	port = nic_dev->hwdev->port_id;
+
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		err = hinic_set_led_status(nic_dev->hwdev, port,
+					   HINIC_LED_TYPE_LINK,
+					   HINIC_LED_MODE_FORCE_2HZ);
+		if (err)
+			netif_err(nic_dev, drv, netdev,
+				  "Set LED blinking in 2HZ failed\n");
+		else
+			netif_info(nic_dev, drv, netdev,
+				   "Set LED blinking in 2HZ success\n");
+		break;
+
+	case ETHTOOL_ID_INACTIVE:
+		err = hinic_reset_led_status(nic_dev->hwdev, port);
+		if (err)
+			netif_err(nic_dev, drv, netdev,
+				  "Reset LED to original status failed\n");
+		else
+			netif_info(nic_dev, drv, netdev,
+				   "Reset LED to original status success\n");
+
+		break;
+
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return err;
+}
+
 static const struct ethtool_ops hinic_ethtool_ops = {
 	.supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS |
 				     ETHTOOL_COALESCE_RX_MAX_FRAMES |
@@ -1785,6 +1825,7 @@ static const struct ethtool_ops hinic_ethtool_ops = {
 	.get_ethtool_stats = hinic_get_ethtool_stats,
 	.get_strings = hinic_get_strings,
 	.self_test = hinic_diag_test,
+	.set_phys_id = hinic_set_phys_id,
 };
 
 static const struct ethtool_ops hinicvf_ethtool_ops = {
drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c +2 -0
index 4de50e4ba4df..45c137827a16 100644
@@ -83,6 +83,8 @@ static int parse_capability(struct hinic_hwdev *hwdev,
 		nic_cap->max_vf_qps = dev_cap->max_vf_sqs + 1;
 	}
 
+	hwdev->port_id = dev_cap->port_id;
+
 	return 0;
 }
 
drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h +1 -0
index c92c39a50b81..01fe94f2d4bc 100644
@@ -312,6 +312,7 @@ struct hinic_hwdev {
 	struct hinic_mbox_func_to_func  *func_to_func;
 
 	struct hinic_cap                nic_cap;
+	u8				port_id;
 };
 
 struct hinic_nic_cb {
drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.h +3 -1
index a3349ae30ff3..919d2c6ffc35 100644
@@ -81,7 +81,9 @@ enum hinic_comm_cmd {
 	HINIC_COMM_CMD_MSI_CTRL_REG_WR_BY_UP,
 	HINIC_COMM_CMD_MSI_CTRL_REG_RD_BY_UP,
 
-	HINIC_COMM_CMD_L2NIC_RESET		= 0x4b,
+	HINIC_COMM_CMD_SET_LED_STATUS	= 0x4a,
+
+	HINIC_COMM_CMD_L2NIC_RESET	= 0x4b,
 
 	HINIC_COMM_CMD_PAGESIZE_SET	= 0x50,
 
drivers/net/ethernet/huawei/hinic/hinic_port.c +55 -0

58 lines not on this page · raw message

drivers/net/ethernet/huawei/hinic/hinic_port.h +35 -0
index b21956d7232e..5c916875f295 100644
@@ -666,6 +666,17 @@ struct hinic_port_loopback {
 	u32	en;
 };
 
+struct hinic_led_info {
+	u8	status;
+	u8	version;
+	u8	rsvd0[6];
+
+	u8	port;
+	u8	type;
+	u8	mode;
+	u8	reset;
+};
+
 int hinic_port_add_mac(struct hinic_dev *nic_dev, const u8 *addr,
 		       u16 vlan_id);
 
@@ -765,6 +776,30 @@ int hinic_dcb_set_pfc(struct hinic_hwdev *hwdev, u8 pfc_en, u8 pfc_bitmap);
 
 int hinic_set_loopback_mode(struct hinic_hwdev *hwdev, u32 mode, u32 enable);
 
+enum hinic_led_mode {
+	HINIC_LED_MODE_ON,
+	HINIC_LED_MODE_OFF,
+	HINIC_LED_MODE_FORCE_1HZ,
+	HINIC_LED_MODE_FORCE_2HZ,
+	HINIC_LED_MODE_FORCE_4HZ,
+	HINIC_LED_MODE_1HZ,
+	HINIC_LED_MODE_2HZ,
+	HINIC_LED_MODE_4HZ,
+	HINIC_LED_MODE_INVALID,
+};
+
+enum hinic_led_type {
+	HINIC_LED_TYPE_LINK,
+	HINIC_LED_TYPE_LOW_SPEED,
+	HINIC_LED_TYPE_HIGH_SPEED,
+	HINIC_LED_TYPE_INVALID,
+};
+
+int hinic_reset_led_status(struct hinic_hwdev *hwdev, u8 port);
+
+int hinic_set_led_status(struct hinic_hwdev *hwdev, u8 port,
+			 enum hinic_led_type type, enum hinic_led_mode mode);
+
 int hinic_open(struct net_device *netdev);
 
 int hinic_close(struct net_device *netdev);
drivers/net/ethernet/huawei/hinic/hinic_sriov.c +2 -2
index efab2dd2c889..f5c7c1f48542 100644
@@ -383,7 +383,7 @@ static int hinic_del_vf_mac_msg_handler(void *hwdev, u16 vf_id,
 
 	nic_io = &hw_dev->func_to_io;
 	vf_info = nic_io->vf_infos + HW_VF_ID_TO_OS(vf_id);
-	if (vf_info->pf_set_mac  && is_valid_ether_addr(mac_in->mac) &&
+	if (vf_info->pf_set_mac && is_valid_ether_addr(mac_in->mac) &&
 	    !memcmp(vf_info->vf_mac_addr, mac_in->mac, ETH_ALEN)) {
 		dev_warn(&hw_dev->hwif->pdev->dev, "PF has already set VF mac.\n");
 		mac_out->status = HINIC_PF_SET_VF_ALREADY;
@@ -905,7 +905,6 @@ int hinic_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, bool setting)
 
 	err = hinic_set_vf_spoofchk(sriov_info->hwdev,
 				    OS_VF_ID_TO_HW(vf), setting);
-
 	if (!err) {
 		netif_info(nic_dev, drv, netdev, "Set VF %d spoofchk %s successfully\n",
 			   vf, setting ? "on" : "off");
@@ -1020,6 +1019,7 @@ static int cfg_mbx_pf_proc_vf_msg(void *hwdev, u16 vf_id, u8 cmd, void *buf_in,
 	dev_cap->max_vf = cap->max_vf;
 	dev_cap->max_sqs = cap->max_vf_qps;
 	dev_cap->max_rqs = cap->max_vf_qps;
+	dev_cap->port_id = dev->port_id;
 
 	*out_size = sizeof(*dev_cap);
 
Signature · 1 line
2.17.1
maintainer
#2 lore raw

Re: [PATCH net-next v2 1/5] hinic: add support to set and get pause params

In reply to Luo bin

drivers/net/ethernet/huawei/hinic/hinic_main.c int hinic_open(struct net_device *netdev) · line 470

Quoted 9 lines · On Tue, 23 Jun 2020 22:24:05 +0800 Luo bin wrote:
drivers/net/ethernet/huawei/hinic/hinic_main.c +1 -0
index e9e6f4c9309a..e69edb01fd9b 100644
@@ -467,6 +467,7 @@ int hinic_open(struct net_device *netdev)
 	if (ret)
 		netif_warn(nic_dev, drv, netdev,
 			   "Failed to revert port state\n");
+

Unrelated chunk, please drop.

Quoted 66 lines
drivers/net/ethernet/huawei/hinic/hinic_main.c +33 -2
 err_port_state:
 	free_rxqs(nic_dev);
 	if (nic_dev->flags & HINIC_RSS_ENABLE) {
@@ -887,6 +888,26 @@ static void netdev_features_init(struct net_device *netdev)
 	netdev->features = netdev->hw_features | NETIF_F_HW_VLAN_CTAG_FILTER;
 }
 
+static void hinic_refresh_nic_cfg(struct hinic_dev *nic_dev)
+{
+	struct hinic_nic_cfg *nic_cfg = &nic_dev->hwdev->func_to_io.nic_cfg;
+	struct hinic_pause_config pause_info = {0};
+	struct hinic_port_cap port_cap = {0};
+
+	if (hinic_port_get_cap(nic_dev, &port_cap))
+		return;
+
+	mutex_lock(&nic_cfg->cfg_mutex);
+	if (nic_cfg->pause_set || !port_cap.autoneg_state) {
+		nic_cfg->auto_neg = port_cap.autoneg_state;
+		pause_info.auto_neg = nic_cfg->auto_neg;
+		pause_info.rx_pause = nic_cfg->rx_pause;
+		pause_info.tx_pause = nic_cfg->tx_pause;
+		hinic_set_hw_pause_info(nic_dev->hwdev, &pause_info);
+	}
+	mutex_unlock(&nic_cfg->cfg_mutex);
+}
+
 /**
  * link_status_event_handler - link event handler
  * @handle: nic device for the handler
@@ -918,6 +939,9 @@ static void link_status_event_handler(void *handle, void *buf_in, u16 in_size,
 
 		up(&nic_dev->mgmt_lock);
 
+		if (!HINIC_IS_VF(nic_dev->hwdev->hwif))
+			hinic_refresh_nic_cfg(nic_dev);
+
 		netif_info(nic_dev, drv, nic_dev->netdev, "HINIC_Link is UP\n");
 	} else {
 		down(&nic_dev->mgmt_lock);
@@ -950,26 +974,38 @@ static int set_features(struct hinic_dev *nic_dev,
 	u32 csum_en = HINIC_RX_CSUM_OFFLOAD_EN;
 	int err = 0;
 
-	if (changed & NETIF_F_TSO)
+	if (changed & NETIF_F_TSO) {
 		err = hinic_port_set_tso(nic_dev, (features & NETIF_F_TSO) ?
 					 HINIC_TSO_ENABLE : HINIC_TSO_DISABLE);
+		if (err)
+			return err;
+	}
 
-	if (changed & NETIF_F_RXCSUM)
+	if (changed & NETIF_F_RXCSUM) {
 		err = hinic_set_rx_csum_offload(nic_dev, csum_en);
+		if (err)
+			return err;
+	}
 
 	if (changed & NETIF_F_LRO) {
 		err = hinic_set_rx_lro_state(nic_dev,
 					     !!(features & NETIF_F_LRO),
 					     HINIC_LRO_RX_TIMER_DEFAULT,
 					     HINIC_LRO_MAX_WQE_NUM_DEFAULT);
+		if (err)
+			return err;

drivers/net/ethernet/huawei/hinic/hinic_main.c static int set_features(struct hinic_dev *nic_dev, · line 1005

Quoted 10 lines
drivers/net/ethernet/huawei/hinic/hinic_main.c +4 -1
 	}
 
-	if (changed & NETIF_F_HW_VLAN_CTAG_RX)
+	if (changed & NETIF_F_HW_VLAN_CTAG_RX) {
 		err = hinic_set_rx_vlan_offload(nic_dev,
 						!!(features &
 						   NETIF_F_HW_VLAN_CTAG_RX));
+		if (err)
+			return err;
+	}

I missed this on v1, but this looks broken, multiple features may be changed at the same time. If user requests RXCSUM and LRO to be changed and LRO change fails the RXCSUM will be left in a different state than dev->features indicates.

drivers/net/ethernet/huawei/hinic/hinic_main.c static int set_features(struct hinic_dev *nic_dev, · line 1008

Quoted 3 lines
drivers/net/ethernet/huawei/hinic/hinic_main.c +2 -1
-	return err;
+	/* enable pause and disable pfc by default */
+	return hinic_dcb_set_pfc(nic_dev->hwdev, 0, 0);

Why do you disable PFC every time features are changed?

drivers/net/ethernet/huawei/hinic/hinic_main.c static int set_features(struct hinic_dev *nic_dev, · line 1008

Quoted 1 line
drivers/net/ethernet/huawei/hinic/hinic_main.c +1 -0
+int hinic_dcb_set_pfc(struct hinic_hwdev *hwdev, u8 pfc_en, u8 pfc_bitmap)

This is only ever called with 0, 0 as parameters.

maintainer
#10 lore raw

Re: [PATCH net-next v2 5/5] hinic: add support to get eeprom information

In reply to Luo bin
Quoted 8 lines · On Tue, 23 Jun 2020 22:24:09 +0800 Luo bin wrote:
drivers/net/ethernet/huawei/hinic/hinic_port.c +8 -0
+int hinic_get_sfp_eeprom(struct hinic_hwdev *hwdev, u8 *data, u16 *len)
+{
+	struct hinic_cmd_get_std_sfp_info sfp_info = {0};
+	u16 out_size = sizeof(sfp_info);
+	u8 port_id;
+	int err;
+
+	if (!hwdev || !data || !len)

drivers/net/ethernet/huawei/hinic/hinic_port.c int hinic_reset_led_status(struct hinic_hwdev *hwdev, u8 port) · line 1390

Quoted 10 lines
drivers/net/ethernet/huawei/hinic/hinic_port.c +9 -0
+		return -EINVAL;
 
+int hinic_get_sfp_type(struct hinic_hwdev *hwdev, u8 *data0, u8 *data1)
+{
+	u8 sfp_data[STD_SFP_INFO_MAX_SIZE];
+	u16 len;
+	int err;
+
+	if (!hwdev || !data0 || !data1)
+		return -EINVAL;

No need to check these, callers are correct. We don't do defensive programming in the kernel.

Review

Quoted 1 line
(quoted diff) +1 -0
+	return  0;

double space

author
#3 lore raw

Re: [PATCH net-next v2 1/5] hinic: add support to set and get pause params

In reply to Jakub Kicinski
Quoted 13 lines · Jakub Kicinski

drivers/net/ethernet/huawei/hinic/hinic_main.c int hinic_open(struct net_device *netdev) · line 470

Quoted 9 lines · On Tue, 23 Jun 2020 22:24:05 +0800 Luo bin wrote:
drivers/net/ethernet/huawei/hinic/hinic_main.c +1 -0
index e9e6f4c9309a..e69edb01fd9b 100644
@@ -467,6 +467,7 @@ int hinic_open(struct net_device *netdev)
 	if (ret)
 		netif_warn(nic_dev, drv, netdev,
 			   "Failed to revert port state\n");
+

Unrelated chunk, please drop.

Will undo this.Thanks.

Quoted 68 lines
Quoted 68 lines
drivers/net/ethernet/huawei/hinic/hinic_main.c +33 -2
 err_port_state:
 	free_rxqs(nic_dev);
 	if (nic_dev->flags & HINIC_RSS_ENABLE) {
@@ -887,6 +888,26 @@ static void netdev_features_init(struct net_device *netdev)
 	netdev->features = netdev->hw_features | NETIF_F_HW_VLAN_CTAG_FILTER;
 }
 
+static void hinic_refresh_nic_cfg(struct hinic_dev *nic_dev)
+{
+	struct hinic_nic_cfg *nic_cfg = &nic_dev->hwdev->func_to_io.nic_cfg;
+	struct hinic_pause_config pause_info = {0};
+	struct hinic_port_cap port_cap = {0};
+
+	if (hinic_port_get_cap(nic_dev, &port_cap))
+		return;
+
+	mutex_lock(&nic_cfg->cfg_mutex);
+	if (nic_cfg->pause_set || !port_cap.autoneg_state) {
+		nic_cfg->auto_neg = port_cap.autoneg_state;
+		pause_info.auto_neg = nic_cfg->auto_neg;
+		pause_info.rx_pause = nic_cfg->rx_pause;
+		pause_info.tx_pause = nic_cfg->tx_pause;
+		hinic_set_hw_pause_info(nic_dev->hwdev, &pause_info);
+	}
+	mutex_unlock(&nic_cfg->cfg_mutex);
+}
+
 /**
  * link_status_event_handler - link event handler
  * @handle: nic device for the handler
@@ -918,6 +939,9 @@ static void link_status_event_handler(void *handle, void *buf_in, u16 in_size,
 
 		up(&nic_dev->mgmt_lock);
 
+		if (!HINIC_IS_VF(nic_dev->hwdev->hwif))
+			hinic_refresh_nic_cfg(nic_dev);
+
 		netif_info(nic_dev, drv, nic_dev->netdev, "HINIC_Link is UP\n");
 	} else {
 		down(&nic_dev->mgmt_lock);
@@ -950,26 +974,38 @@ static int set_features(struct hinic_dev *nic_dev,
 	u32 csum_en = HINIC_RX_CSUM_OFFLOAD_EN;
 	int err = 0;
 
-	if (changed & NETIF_F_TSO)
+	if (changed & NETIF_F_TSO) {
 		err = hinic_port_set_tso(nic_dev, (features & NETIF_F_TSO) ?
 					 HINIC_TSO_ENABLE : HINIC_TSO_DISABLE);
+		if (err)
+			return err;
+	}
 
-	if (changed & NETIF_F_RXCSUM)
+	if (changed & NETIF_F_RXCSUM) {
 		err = hinic_set_rx_csum_offload(nic_dev, csum_en);
+		if (err)
+			return err;
+	}
 
 	if (changed & NETIF_F_LRO) {
 		err = hinic_set_rx_lro_state(nic_dev,
 					     !!(features & NETIF_F_LRO),
 					     HINIC_LRO_RX_TIMER_DEFAULT,
 					     HINIC_LRO_MAX_WQE_NUM_DEFAULT);
+		if (err)
+			return err;
 	}
 
Quoted 14 lines

drivers/net/ethernet/huawei/hinic/hinic_main.c static int set_features(struct hinic_dev *nic_dev, · line 1005

Quoted 8 lines
drivers/net/ethernet/huawei/hinic/hinic_main.c +4 -1
-	if (changed & NETIF_F_HW_VLAN_CTAG_RX)
+	if (changed & NETIF_F_HW_VLAN_CTAG_RX) {
 		err = hinic_set_rx_vlan_offload(nic_dev,
 						!!(features &
 						   NETIF_F_HW_VLAN_CTAG_RX));
+		if (err)
+			return err;
+	}

I missed this on v1, but this looks broken, multiple features may be changed at the same time. If user requests RXCSUM and LRO to be changed and LRO change fails the RXCSUM will be left in a different state than dev->features indicates.

You're right. Will fix. Thank you.

Quoted 6 lines

drivers/net/ethernet/huawei/hinic/hinic_main.c static int set_features(struct hinic_dev *nic_dev, · line 1008

Quoted 3 lines
drivers/net/ethernet/huawei/hinic/hinic_main.c +2 -1
-	return err;
+	/* enable pause and disable pfc by default */
+	return hinic_dcb_set_pfc(nic_dev->hwdev, 0, 0);

Why do you disable PFC every time features are changed?

It can be optimized. Thanks.

Quoted 5 lines

drivers/net/ethernet/huawei/hinic/hinic_main.c static int set_features(struct hinic_dev *nic_dev, · line 1008

Quoted 1 line
drivers/net/ethernet/huawei/hinic/hinic_main.c +1 -0
+int hinic_dcb_set_pfc(struct hinic_hwdev *hwdev, u8 pfc_en, u8 pfc_bitmap)

This is only ever called with 0, 0 as parameters.
.

This function will be called with other parameters before long to support DCB. So I intend not to modify it.

author
#11 lore raw

Re: [PATCH net-next v2 5/5] hinic: add support to get eeprom information

In reply to Jakub Kicinski
Quoted 13 lines · Jakub Kicinski

drivers/net/ethernet/huawei/hinic/hinic_port.c int hinic_reset_led_status(struct hinic_hwdev *hwdev, u8 port) · line 1390

Quoted 8 lines · On Tue, 23 Jun 2020 22:24:09 +0800 Luo bin wrote:
drivers/net/ethernet/huawei/hinic/hinic_port.c +8 -0
+int hinic_get_sfp_type(struct hinic_hwdev *hwdev, u8 *data0, u8 *data1)
+{
+	u8 sfp_data[STD_SFP_INFO_MAX_SIZE];
+	u16 len;
+	int err;
+
+	if (!hwdev || !data0 || !data1)
+		return -EINVAL;

No need to check these, callers are correct. We don't do defensive programming in the kernel.

Will fix. Thank you for your review.

Quoted 3 lines

Review

Quoted 1 line
(quoted diff) +1 -0
+	return  0;

double space

Will fix. Thank you for your review.