Skip to contentSkip to conversation

arm64: dts: agilex: add status to qspi dts node

PATCH In review Dinh Nguyen 2 participants 6 messages Jun 29, 2020 – Jul 10, 2020

Subsystems (3)
lore
Share & tools
lore

Dinh Nguyen

author maintainer
#0 lore raw

PATCH 1/3 arm64: dts: agilex: add status to qspi dts node

Add status = "okay" to QSPI node.

Fixes c4c8757b2d895 ("arm64: dts: agilex: add QSPI support for Intel

Agilex")

Cc linux-stable <[email protected]> # >= v5.5
---
 arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts +1 -0
index 51d948323bfd..92f478def723 100644
@@ -98,6 +98,7 @@
 };
 
 &qspi {
+	status = "okay";
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
Signature · 1 line
2.17.1
author maintainer
#1 lore raw

PATCH 2/3 arm64: dts: stratix10: add status to qspi dts node

Add status = "okay" to QSPI node.

Fixes 0cb140d07fc75 ("arm64: dts: stratix10: Add QSPI support for

Stratix10")

Cc linux-stable <[email protected]> # >= v5.6
---
 arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts      | 1 +
 arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts | 1 +
 2 files changed, 2 insertions(+)
arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +1 -0
index f6c4a15079d3..feadd21bc0dc 100644
@@ -155,6 +155,7 @@
 };
 
 &qspi {
+	status = "okay";
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts +1 -0
index 9946515b8afd..4000c393243d 100644
@@ -188,6 +188,7 @@
 };
 
 &qspi {
+	status = "okay";
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
Signature · 1 line
2.17.1
author maintainer
#5 lore raw

PATCH 3/3 arm64: dts: stratix10: increase QSPI reg address in nand dts file

In reply to Dinh Nguyen

From: Dinh Nguyen <[email protected]>

Match the QSPI reg address in the socfpga_stratix10_socdk.dts file.

Fixes 80f132d73709 ("arm64: dts: increase the QSPI reg address for Stratix10

and Agilex")

Cc linux-stable <[email protected]> # >= v5.6
---
 arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts +3 -3
index 4000c393243d..c07966740e14 100644
@@ -212,12 +212,12 @@
 
 			qspi_boot: partition@0 {
 				label = "Boot and fpga data";
-				reg = <0x0 0x034B0000>;
+				reg = <0x0 0x03FE0000>;
 			};
 
-			qspi_rootfs: partition@4000000 {
+			qspi_rootfs: partition@3FE0000 {
 				label = "Root Filesystem - JFFS2";
-				reg = <0x034B0000 0x0EB50000>;
+				reg = <0x03FE0000 0x0C020000>;
 			};
 		};
 	};
Signature · 1 line
2.17.1
maintainer
#2 lore raw

Re: [PATCH 2/3] arm64: dts: stratix10: add status to qspi dts node

In reply to Dinh Nguyen

Hi

[This is an automated email]

This commit has been processed because it contains a "Fixes:" tag
fixing commit: 0cb140d07fc7 ("arm64: dts: stratix10: Add QSPI support for Stratix10").

The bot has tested the following trees: v5.7.7, v5.4.50, v4.19.131.

v5.7.7: Build OK!
v5.4.50: Failed to apply! Possible dependencies:

    3c0f3b8545e79 ("arm64: dts: add NAND board files for Stratix10 and Agilex")

v4.19.131: Failed to apply! Possible dependencies:

    116edf6e5239e ("MIPS: mscc: add DT for Ocelot PCB120")
    1ac832509f2ea ("nds32: Support FP emulation")
    387181dcdb6c1 ("RISC-V: Always compile mm/init.c with cmodel=medany and notrace")
    3c0f3b8545e79 ("arm64: dts: add NAND board files for Stratix10 and Agilex")
    4b36daf9ada30 ("arm64: dts: agilex: Add initial support for Intel's Agilex SoCFPGA")
    704cfd7f5f71c ("ARM: sti: remove pen_release and boot_lock")
    78e3dbc166a13 ("ARM: Prepare RDA8810PL SoC")
    7938e6315c9af ("nds32: Power management for nds32")
    9671f7061433e ("Allow to disable FPU support")
    9fb29c734f9e9 ("ARM: milbeaut: Add basic support for Milbeaut m10v SoC")
    c32e64e852f3f ("csky: Build infrastructure")
    c4c14c3bd177e ("csky: remove builtin-dtb Kbuild")
    e46bf83c1864a ("nds32: nds32 FPU port")
    ebd09753b5707 ("nds32: Perf porting")
    ec8f24b7faaf3 ("treewide: Add SPDX license identifier - Makefile/Kconfig")

NOTE: The patch will not be queued to stable trees until it is upstream.

How should we proceed with this patch?

Signature · 2 lines
Thanks
Sasha
author maintainer
#3 lore raw

Re: [PATCH 2/3] arm64: dts: stratix10: add status to qspi dts node

Please apply to v5.7.7

Thanks,
Dinh

Quoted 35 lines · Sasha Levin

Hi

[This is an automated email]

This commit has been processed because it contains a "Fixes:" tag
fixing commit: 0cb140d07fc7 ("arm64: dts: stratix10: Add QSPI support for Stratix10").

The bot has tested the following trees: v5.7.7, v5.4.50, v4.19.131.

v5.7.7: Build OK!
v5.4.50: Failed to apply! Possible dependencies:

    3c0f3b8545e79 ("arm64: dts: add NAND board files for Stratix10 and Agilex")

v4.19.131: Failed to apply! Possible dependencies:

    116edf6e5239e ("MIPS: mscc: add DT for Ocelot PCB120")
    1ac832509f2ea ("nds32: Support FP emulation")
    387181dcdb6c1 ("RISC-V: Always compile mm/init.c with cmodel=medany and notrace")
    3c0f3b8545e79 ("arm64: dts: add NAND board files for Stratix10 and Agilex")
    4b36daf9ada30 ("arm64: dts: agilex: Add initial support for Intel's Agilex SoCFPGA")
    704cfd7f5f71c ("ARM: sti: remove pen_release and boot_lock")
    78e3dbc166a13 ("ARM: Prepare RDA8810PL SoC")
    7938e6315c9af ("nds32: Power management for nds32")
    9671f7061433e ("Allow to disable FPU support")
    9fb29c734f9e9 ("ARM: milbeaut: Add basic support for Milbeaut m10v SoC")
    c32e64e852f3f ("csky: Build infrastructure")
    c4c14c3bd177e ("csky: remove builtin-dtb Kbuild")
    e46bf83c1864a ("nds32: nds32 FPU port")
    ebd09753b5707 ("nds32: Perf porting")
    ec8f24b7faaf3 ("treewide: Add SPDX license identifier - Makefile/Kconfig")

NOTE: The patch will not be queued to stable trees until it is upstream.

How should we proceed with this patch?

author maintainer
#4 lore raw

Re: [PATCH 2/3] arm64: dts: stratix10: add status to qspi dts node

In reply to Sasha Levin

Please apply to v5.7.7

Thanks,
Dinh

Quoted 35 lines · Sasha Levin

Hi

[This is an automated email]

This commit has been processed because it contains a "Fixes:" tag
fixing commit: 0cb140d07fc7 ("arm64: dts: stratix10: Add QSPI support for Stratix10").

The bot has tested the following trees: v5.7.7, v5.4.50, v4.19.131.

v5.7.7: Build OK!
v5.4.50: Failed to apply! Possible dependencies:

    3c0f3b8545e79 ("arm64: dts: add NAND board files for Stratix10 and Agilex")

v4.19.131: Failed to apply! Possible dependencies:

    116edf6e5239e ("MIPS: mscc: add DT for Ocelot PCB120")
    1ac832509f2ea ("nds32: Support FP emulation")
    387181dcdb6c1 ("RISC-V: Always compile mm/init.c with cmodel=medany and notrace")
    3c0f3b8545e79 ("arm64: dts: add NAND board files for Stratix10 and Agilex")
    4b36daf9ada30 ("arm64: dts: agilex: Add initial support for Intel's Agilex SoCFPGA")
    704cfd7f5f71c ("ARM: sti: remove pen_release and boot_lock")
    78e3dbc166a13 ("ARM: Prepare RDA8810PL SoC")
    7938e6315c9af ("nds32: Power management for nds32")
    9671f7061433e ("Allow to disable FPU support")
    9fb29c734f9e9 ("ARM: milbeaut: Add basic support for Milbeaut m10v SoC")
    c32e64e852f3f ("csky: Build infrastructure")
    c4c14c3bd177e ("csky: remove builtin-dtb Kbuild")
    e46bf83c1864a ("nds32: nds32 FPU port")
    ebd09753b5707 ("nds32: Perf porting")
    ec8f24b7faaf3 ("treewide: Add SPDX license identifier - Makefile/Kconfig")

NOTE: The patch will not be queued to stable trees until it is upstream.

How should we proceed with this patch?