ARM: dts: exynos: Define fixed regulators in root node for consistency in Origen
Subsystems (2)
Krzysztof Kozlowski
maintainerPATCH v3 1/3 ARM: dts: exynos: Define fixed regulators in root node for consistency in Origen
Remove the regulators node and define fixed regulators directly under the root node. This makes Exynos4412 Origen board consistent with other Exynos boards.
---
Changes since v2:
1. Remove also "reg" property
Changes since v1:
1. New patch
--- arch/arm/boot/dts/exynos4412-origen.dts | 21 +++++++-------------- 1 file changed, 7 insertions(+), 14 deletions(-)
arch/arm/boot/dts/exynos4412-origen.dts +7 -14
@@ -33,20 +33,13 @@ reg = <0x0203F000 0x1000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - mmc_reg: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "VMEM_VDD_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + mmc_reg: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; + enable-active-high; }; display-timings {
Signature · 1 line
2.17.1
Krzysztof Kozlowski
maintainerPATCH v3 2/3 ARM: dts: exynos: Define fixed regulators in root node for consistency in Arndale
Remove the regulators node and define fixed regulators directly under the root node. This makes Exynos5250 Arndale board consistent with other Exynos boards.
---
Changes since v2:
1. Remove also "reg" property
Changes since v1:
1. New patch
--- arch/arm/boot/dts/exynos5250-arndale.dts | 86 ++++++++++-------------- 1 file changed, 37 insertions(+), 49 deletions(-)
arch/arm/boot/dts/exynos5250-arndale.dts +37 -49
@@ -84,60 +84,48 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - main_dc_reg: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "MAIN_DC"; - regulator-always-on; - }; + main_dc_reg: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "MAIN_DC"; + regulator-always-on; + }; - mmc_reg: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "VDD_MMC"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; + mmc_reg: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "VDD_MMC"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; - reg_hdmi_en: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "hdmi-en"; - regulator-always-on; - }; + reg_hdmi_en: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "hdmi-en"; + regulator-always-on; + }; - vcc_1v2_reg: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "VCC_1V2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; + vcc_1v2_reg: regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; - vcc_1v8_reg: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; + vcc_1v8_reg: regulator-4 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; - vcc_3v3_reg: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + vcc_3v3_reg: regulator-5 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; }; sound {
Signature · 1 line
2.17.1
Krzysztof Kozlowski
maintainerPATCH v3 3/3 ARM: dts: exynos: Define fixed regulators in root node for consistency in SMDK5420
In reply to Krzysztof KozlowskiRemove the regulators node and define fixed regulators directly under the root node. This makes SMDK5420 board consistent with other Exynos boards.
Name the fixed regulator nodes consistently.
---
Changes since v2:
1. Remove also "reg" property
Changes since v1:
1. New patch
--- arch/arm/boot/dts/exynos5420-smdk5420.dts | 53 ++++++++++------------- 1 file changed, 22 insertions(+), 31 deletions(-)
arch/arm/boot/dts/exynos5420-smdk5420.dts +22 -31
@@ -32,40 +32,31 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - vdd: fixed-regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "vdd-supply"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; + vdd: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "vdd-supply"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; - dbvdd: fixed-regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "dbvdd-supply"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + dbvdd: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "dbvdd-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - spkvdd: fixed-regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "spkvdd-supply"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + spkvdd: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "spkvdd-supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; }; - usb300_vbus_reg: regulator-usb300 { + usb300_vbus_reg: regulator-3 { compatible = "regulator-fixed"; regulator-name = "VBUS0"; regulator-min-microvolt = <5000000>;
@@ -76,7 +67,7 @@ enable-active-high; }; - usb301_vbus_reg: regulator-usb301 { + usb301_vbus_reg: regulator-4 { compatible = "regulator-fixed"; regulator-name = "VBUS1"; regulator-min-microvolt = <5000000>;
Signature · 1 line
2.17.1