Skip to contentSkip to conversation

readfile: implement readfile syscall

PATCH Alexey Dobriyan 2 participants 2 messages Jul 4, 2020 VFS

lore
Share & tools
lore
#0 lore raw
Quoted 9 lines · Al
Quoted 5 lines · Miklos Szeredi

1) just leave the first explanation (it's an open + read + close
equivalent) and leave out the rest

2) add a loop around the vfs_read() in the code.

3) don't bother with the entire thing, until somebody manages to demonstrate a setup where it does make a real difference (compared to than the obvious sequence of syscalls, that is).

Ehh? System call overead is trivially measurable.
https://lwn.net/Articles/814175/

Quoted 2 lines

At which point we'll need to figure out
what's going on and deal with the underlying problem of that setup.

Run top?

Teach userspace to read 1 page minimum?

	192803 read(4, "cpu  3718263 4417 342808 7127674"..., 1024) = 1024
	192803 read(4, " 0 21217 21617 21954 10201 15425"..., 1024) = 1024
	192803 read(4, " 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"..., 1024) = 1024
	192803 read(4, "", 1024)

Teach userspace to pread?

	192803 openat(AT_FDCWD, "/proc/uptime", O_RDONLY) = 5
	192803 lseek(5, 0, SEEK_SET)            = 0
	192803 read(5, "47198.56 713699.82\n", 8191) = 19

Rhetorical question: what is harder: ditch the main source of overhead (VFS, seq_file, text) or teach userspace how to read files?

Here is open+read /proc/cpuinfo in python2 and python3. Python2 case is terrifying.

BTW is there is something broken with seqfiles and record keeping? Why does it return only 2 records per read?

Python 3:

openat(AT_FDCWD, "/proc/cpuinfo", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
ioctl(3, TCGETS, 0x7ffe6f1f0850) = -1 ENOTTY (Inappropriate ioctl for device)
lseek(3, 0, SEEK_CUR) = 0
ioctl(3, TCGETS, 0x7ffe6f1f0710) = -1 ENOTTY (Inappropriate ioctl for device)
lseek(3, 0, SEEK_CUR) = 0
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
read(3, "processor\t: 0\nvendor_id\t: Genuin"..., 8192) = 3038 read(3, "processor\t: 2\nvendor_id\t: Genuin"..., 5154) = 3038 read(3, "processor\t: 4\nvendor_id\t: Genuin"..., 2116) = 2116 read(3, "clmulqdq dtes64 monitor ds_cpl v"..., 8448) = 3966 read(3, "processor\t: 8\nvendor_id\t: Genuin"..., 4482) = 3038 read(3, "processor\t: 10\nvendor_id\t: Genui"..., 1444) = 1444 read(3, "t\t: 64\naddress sizes\t: 46 bits p"..., 16896) = 3116 read(3, "processor\t: 13\nvendor_id\t: Genui"..., 13780) = 3044 read(3, "processor\t: 15\nvendor_id\t: Genui"..., 10736) = 1522
read(3, "", 9214) = 0

Python 2

openat(AT_FDCWD, "/proc/cpuinfo", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 0
lseek(3, 0, SEEK_CUR) = 0
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 read(3, "processor\t: 0\nvendor_id\t: Genuin"..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
read(3, " cqm_occup_llc cqm_mbm_total cqm"..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 2048
lseek(3, 0, SEEK_CUR) = 2048
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 2048
lseek(3, 0, SEEK_CUR) = 2048
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 2048
lseek(3, 0, SEEK_CUR) = 2048
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 2048
lseek(3, 0, SEEK_CUR) = 2048
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 2048
lseek(3, 0, SEEK_CUR) = 2048
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 2048
lseek(3, 0, SEEK_CUR) = 2048
read(3, "ebs bts rep_good nopl xtopology "..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 3072
lseek(3, 0, SEEK_CUR) = 3072
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 3072
lseek(3, 0, SEEK_CUR) = 3072
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 3072
lseek(3, 0, SEEK_CUR) = 3072
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 3072
lseek(3, 0, SEEK_CUR) = 3072
read(3, "ntel\ncpu family\t: 6\nmodel\t\t: 79\n"..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 4096
lseek(3, 0, SEEK_CUR) = 4096
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 4096
lseek(3, 0, SEEK_CUR) = 4096
read(3, "bm_local dtherm ida arat pln pts"..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 5120
lseek(3, 0, SEEK_CUR) = 5120
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 5120
lseek(3, 0, SEEK_CUR) = 5120
read(3, "nstop_tsc cpuid aperfmperf pni p"..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 6144
lseek(3, 0, SEEK_CUR) = 6144
read(3, "del name\t: Intel(R) Xeon(R) CPU "..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 7168
lseek(3, 0, SEEK_CUR) = 7168
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 7168
lseek(3, 0, SEEK_CUR) = 7168
read(3, "d_clear flush_l1d\nvmx flags\t: vn"..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 8192
lseek(3, 0, SEEK_CUR) = 8192
read(3, "clmulqdq dtes64 monitor ds_cpl v"..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 9216
lseek(3, 0, SEEK_CUR) = 9216
read(3, "E5-2620 v4 @ 2.10GHz\nstepping\t: "..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 10240
lseek(3, 0, SEEK_CUR) = 10240
read(3, "vnmi preemption_timer posted_int"..., 1024) = 1024 read(3, " vmx smx est tm2 ssse3 sdbg fma "..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 12288
lseek(3, 0, SEEK_CUR) = 12288
read(3, ": 1\nmicrocode\t: 0xb000038\ncpu MH"..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 13312
lseek(3, 0, SEEK_CUR) = 13312
read(3, "r invvpid ept_x_only ept_ad ept_"..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 14336
lseek(3, 0, SEEK_CUR) = 14336
read(3, "16 xtpr pdcm pcid dca sse4_1 sse"..., 1024) = 1024 read(3, "\t\t: 1326.352\ncache size\t: 20480 "..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 16384
lseek(3, 0, SEEK_CUR) = 16384
read(3, "gb flexpriority apicv tsc_offset"..., 1024) = 1024 read(3, "4_2 x2apic movbe popcnt tsc_dead"..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 18432
lseek(3, 0, SEEK_CUR) = 18432
read(3, "KB\nphysical id\t: 0\nsiblings\t: 16"..., 1024) = 1024 read(3, " vtpr mtf vapic ept vpid unrestr"..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 20480
lseek(3, 0, SEEK_CUR) = 20480
read(3, "adline_timer aes xsave avx f16c "..., 2048) = 2048 read(3, "estricted_guest vapic_reg vid pl"..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 23552
lseek(3, 0, SEEK_CUR) = 23552
read(3, "16c rdrand lahf_lm abm 3dnowpref"..., 2048) = 770
read(3, "", 1024) = 0
close(3) = 0

#1 lore raw
Quoted 34 lines · Alexey Dobriyan
Quoted 9 lines · Al
Quoted 5 lines · Miklos Szeredi

1) just leave the first explanation (it's an open + read + close
equivalent) and leave out the rest

2) add a loop around the vfs_read() in the code.

3) don't bother with the entire thing, until somebody manages to demonstrate a setup where it does make a real difference (compared to than the obvious sequence of syscalls, that is).

Ehh? System call overead is trivially measurable.
https://lwn.net/Articles/814175/

Quoted 2 lines

At which point we'll need to figure out
what's going on and deal with the underlying problem of that setup.

Run top?

Teach userspace to read 1 page minimum?

        192803 read(4, "cpu  3718263 4417 342808 7127674"..., 1024) = 1024
        192803 read(4, " 0 21217 21617 21954 10201 15425"..., 1024) = 1024
        192803 read(4, " 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"..., 1024) = 1024
        192803 read(4, "", 1024)

Teach userspace to pread?

        192803 openat(AT_FDCWD, "/proc/uptime", O_RDONLY) = 5
        192803 lseek(5, 0, SEEK_SET)            = 0
        192803 read(5, "47198.56 713699.82\n", 8191) = 19
Quoted 8 lines

Rhetorical question: what is harder: ditch the main source of overhead (VFS, seq_file, text) or teach userspace how to read files?

Here is open+read /proc/cpuinfo in python2 and python3. Python2 case is terrifying.

BTW is there is something broken with seqfiles and record keeping? Why does it return only 2 records per read?

seqfile is weird. It uses an internal buffer (m->buf) that starts off with a PAGE_SIZE size (m->size). The internal buffer is filled with whole records, if a single record is larger than the bufsize, then the buffer is expanded until the record fits. Then this internal buffer is used to fill the user buffer supplied by read. If the length of the internal buffer (m->count) overflows the user buffer, then the rest is set aside for the next read. In this case the next read starts with the tail (m->from) of the internal buffer, then, if there's still space in the user buffer, it resets the internal buffer (m->from = 0) and again fills it with at least one whole record and copies as much of that to the user buffer as it can.

Note how this can lead to unfilled bytes at the end of the user buffer. Not sure what's the rationelle, it could just as well loop back to filling a new buf it there's space left in the user buffer. Maybe it was: better return whole records whenever possible. Anyway that can't be changed now, since it's bound to break something out there.

Thanks,
Miklos

Quoted 214 lines

Python 3:

openat(AT_FDCWD, "/proc/cpuinfo", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
ioctl(3, TCGETS, 0x7ffe6f1f0850) = -1 ENOTTY (Inappropriate ioctl for device)
lseek(3, 0, SEEK_CUR) = 0
ioctl(3, TCGETS, 0x7ffe6f1f0710) = -1 ENOTTY (Inappropriate ioctl for device)
lseek(3, 0, SEEK_CUR) = 0
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
read(3, "processor\t: 0\nvendor_id\t: Genuin"..., 8192) = 3038 read(3, "processor\t: 2\nvendor_id\t: Genuin"..., 5154) = 3038 read(3, "processor\t: 4\nvendor_id\t: Genuin"..., 2116) = 2116 read(3, "clmulqdq dtes64 monitor ds_cpl v"..., 8448) = 3966 read(3, "processor\t: 8\nvendor_id\t: Genuin"..., 4482) = 3038 read(3, "processor\t: 10\nvendor_id\t: Genui"..., 1444) = 1444 read(3, "t\t: 64\naddress sizes\t: 46 bits p"..., 16896) = 3116 read(3, "processor\t: 13\nvendor_id\t: Genui"..., 13780) = 3044 read(3, "processor\t: 15\nvendor_id\t: Genui"..., 10736) = 1522
read(3, "", 9214) = 0

Python 2

openat(AT_FDCWD, "/proc/cpuinfo", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 0
lseek(3, 0, SEEK_CUR) = 0
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 read(3, "processor\t: 0\nvendor_id\t: Genuin"..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 1024
lseek(3, 0, SEEK_CUR) = 1024
read(3, " cqm_occup_llc cqm_mbm_total cqm"..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 2048
lseek(3, 0, SEEK_CUR) = 2048
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 2048
lseek(3, 0, SEEK_CUR) = 2048
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 2048
lseek(3, 0, SEEK_CUR) = 2048
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 2048
lseek(3, 0, SEEK_CUR) = 2048
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 2048
lseek(3, 0, SEEK_CUR) = 2048
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 2048
lseek(3, 0, SEEK_CUR) = 2048
read(3, "ebs bts rep_good nopl xtopology "..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 3072
lseek(3, 0, SEEK_CUR) = 3072
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 3072
lseek(3, 0, SEEK_CUR) = 3072
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 3072
lseek(3, 0, SEEK_CUR) = 3072
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 3072
lseek(3, 0, SEEK_CUR) = 3072
read(3, "ntel\ncpu family\t: 6\nmodel\t\t: 79\n"..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 4096
lseek(3, 0, SEEK_CUR) = 4096
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 4096
lseek(3, 0, SEEK_CUR) = 4096
read(3, "bm_local dtherm ida arat pln pts"..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 5120
lseek(3, 0, SEEK_CUR) = 5120
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 5120
lseek(3, 0, SEEK_CUR) = 5120
read(3, "nstop_tsc cpuid aperfmperf pni p"..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 6144
lseek(3, 0, SEEK_CUR) = 6144
read(3, "del name\t: Intel(R) Xeon(R) CPU "..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 7168
lseek(3, 0, SEEK_CUR) = 7168
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 7168
lseek(3, 0, SEEK_CUR) = 7168
read(3, "d_clear flush_l1d\nvmx flags\t: vn"..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 8192
lseek(3, 0, SEEK_CUR) = 8192
read(3, "clmulqdq dtes64 monitor ds_cpl v"..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 9216
lseek(3, 0, SEEK_CUR) = 9216
read(3, "E5-2620 v4 @ 2.10GHz\nstepping\t: "..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 10240
lseek(3, 0, SEEK_CUR) = 10240
read(3, "vnmi preemption_timer posted_int"..., 1024) = 1024 read(3, " vmx smx est tm2 ssse3 sdbg fma "..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 12288
lseek(3, 0, SEEK_CUR) = 12288
read(3, ": 1\nmicrocode\t: 0xb000038\ncpu MH"..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 13312
lseek(3, 0, SEEK_CUR) = 13312
read(3, "r invvpid ept_x_only ept_ad ept_"..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 14336
lseek(3, 0, SEEK_CUR) = 14336
read(3, "16 xtpr pdcm pcid dca sse4_1 sse"..., 1024) = 1024 read(3, "\t\t: 1326.352\ncache size\t: 20480 "..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 16384
lseek(3, 0, SEEK_CUR) = 16384
read(3, "gb flexpriority apicv tsc_offset"..., 1024) = 1024 read(3, "4_2 x2apic movbe popcnt tsc_dead"..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 18432
lseek(3, 0, SEEK_CUR) = 18432
read(3, "KB\nphysical id\t: 0\nsiblings\t: 16"..., 1024) = 1024 read(3, " vtpr mtf vapic ept vpid unrestr"..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 20480
lseek(3, 0, SEEK_CUR) = 20480
read(3, "adline_timer aes xsave avx f16c "..., 2048) = 2048 read(3, "estricted_guest vapic_reg vid pl"..., 1024) = 1024 fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 23552
lseek(3, 0, SEEK_CUR) = 23552
read(3, "16c rdrand lahf_lm abm 3dnowpref"..., 2048) = 770
read(3, "", 1024) = 0
close(3) = 0