ARM: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings
Subsystems (2)
Krzysztof Kozlowski
maintainerPATCH v3 1/1 ARM: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings
There is no need to keep DMA controller nodes under AMBA bus node. Remove the "amba" node to fix dtschema warnings like:
amba: $nodename:0: 'amba' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
---
Changes since v2:
1. Keep the alphabetical order in exynos4210-universal_c210.dts, as suggested by Marek
Changes since v1:
1. Remove the bus, as suggested by Marek
--- arch/arm/boot/dts/exynos3250.dtsi | 47 +++---- arch/arm/boot/dts/exynos4.dtsi | 70 +++++----- .../boot/dts/exynos4210-universal_c210.dts | 28 ++-- arch/arm/boot/dts/exynos5250.dtsi | 92 ++++++------- arch/arm/boot/dts/exynos5410.dtsi | 46 +++---- arch/arm/boot/dts/exynos5420.dtsi | 130 ++++++++---------- 6 files changed, 187 insertions(+), 226 deletions(-)
arch/arm/boot/dts/exynos3250.dtsi +20 -27
@@ -418,33 +418,26 @@ status = "disabled"; }; - amba { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - pdma0: pdma@12680000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12680000 0x1000>; - interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cmu CLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - pdma1: pdma@12690000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12690000 0x1000>; - interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cmu CLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; + pdma0: pdma@12680000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12680000 0x1000>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@12690000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12690000 0x1000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; adc: adc@126c0000 {
arch/arm/boot/dts/exynos4.dtsi +31 -39
76 lines not on this page · raw message
arch/arm/boot/dts/exynos4210-universal_c210.dts +14 -14
@@ -181,20 +181,6 @@ }; }; -&amba { - mdma0: mdma@12840000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12840000 0x1000>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_MDMA>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; - power-domains = <&pd_lcd0>; - }; -}; - &camera { status = "okay";
@@ -616,6 +602,20 @@ /delete-property/dma-names; }; +&soc { + mdma0: mdma@12840000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12840000 0x1000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_MDMA>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + power-domains = <&pd_lcd0>; + }; +}; + &sysram { smp-sram@0 { status = "disabled";
arch/arm/boot/dts/exynos5250.dtsi +42 -50
98 lines not on this page · raw message
arch/arm/boot/dts/exynos5410.dtsi +19 -27
53 lines not on this page · raw message
arch/arm/boot/dts/exynos5420.dtsi +61 -69
137 lines not on this page · raw message
Signature · 1 line
2.17.1
Quoted 6 lines · Krzysztof Kozlowski
There is no need to keep DMA controller nodes under AMBA bus node. Remove the "amba" node to fix dtschema warnings like:
amba: $nodename:0: 'amba' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'Signed-off-by Krzysztof Kozlowski <[email protected]>
Works fine on all affected SoCs.
Quoted 17 lines
---
Changes since v2:
1. Keep the alphabetical order inexynos4210-universal_c210.dts, as suggested by MarekChanges since v1:
1. Remove the bus, as suggested by Marek--- arch/arm/boot/dts/exynos3250.dtsi | 47 +++---- arch/arm/boot/dts/exynos4.dtsi | 70 +++++----- .../boot/dts/exynos4210-universal_c210.dts | 28 ++-- arch/arm/boot/dts/exynos5250.dtsi | 92 ++++++------- arch/arm/boot/dts/exynos5410.dtsi | 46 +++---- arch/arm/boot/dts/exynos5420.dtsi | 130 ++++++++---------- 6 files changed, 187 insertions(+), 226 deletions(-)
Quoted 1 line
...
Best regards
Signature · 2 lines
Marek Szyprowski, PhD Samsung R&D Institute Poland
Hi Krzysztof
Quoted 5 lines
-----Original Message-----
From: Krzysztof Kozlowski <[email protected]>
Sent: 05 July 2020 23:48
To: Rob Herring <[email protected]>; Kukjin Kim <[email protected]>; Krzysztof Kozlowski <[email protected]>; [email protected];
linux-arm-
Quoted 3 lines
[email protected]; [email protected]; linux- [email protected]
Cc: Bartlomiej Zolnierkiewicz <[email protected]>; Sylwester
Nawrocki
Quoted 6 lines
<[email protected]>; Alim Akhtar <[email protected]>; Chanwoo Choi <[email protected]>; Pankaj Dubey <[email protected]>
Subject: [PATCH v3] ARM: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings
Quoted 8 lines
There is no need to keep DMA controller nodes under AMBA bus node. Remove the "amba" node to fix dtschema warnings like:
amba: $nodename:0: 'amba' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Signed-off-by Krzysztof Kozlowski <[email protected]>
Quoted 4 lines
---
Changes since v2:
1. Keep the alphabetical order inexynos4210-universal_c210.dts, as
suggested
Review
Quoted 75 lines
by Marek
Changes since v1:
1. Remove the bus, as suggested by Marek--- arch/arm/boot/dts/exynos3250.dtsi | 47 +++---- arch/arm/boot/dts/exynos4.dtsi | 70 +++++----- .../boot/dts/exynos4210-universal_c210.dts | 28 ++-- arch/arm/boot/dts/exynos5250.dtsi | 92 ++++++------- arch/arm/boot/dts/exynos5410.dtsi | 46 +++---- arch/arm/boot/dts/exynos5420.dtsi | 130 ++++++++---------- 6 files changed, 187 insertions(+), 226 deletions(-)arch/arm/boot/dts/exynos3250.dtsi +20
-27@@ -418,33 +418,26 @@ status = "disabled"; }; - amba { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - pdma0: pdma@12680000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12680000 0x1000>; - interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cmu CLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - pdma1: pdma@12690000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12690000 0x1000>; - interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cmu CLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; + pdma0: pdma@12680000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12680000 0x1000>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@12690000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12690000 0x1000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; };arch/arm/boot/dts/exynos3250.dtsi +0
-0adc: adc@126c0000 {(quoted diff) +0
-0
b/arch/arm/boot/dts/exynos4.dtsi
Quoted 451 lines
index
d2779a790ce3..a1e54449f33f100644arch/arm/boot/dts/exynos4.dtsi +31
-39@@ -669,45 +669,37 @@ status = "disabled"; }; - amba: amba { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&gic>; - ranges; - - pdma0: pdma@12680000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12680000 0x1000>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - pdma1: pdma@12690000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12690000 0x1000>; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - mdma1: mdma@12850000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12850000 0x1000>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_MDMA>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; - }; + pdma0: pdma@12680000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12680000 0x1000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@12690000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12690000 0x1000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + mdma1: mdma@12850000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12850000 0x1000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_MDMA>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>;arch/arm/boot/dts/exynos4.dtsi +0
-0}; fimd: fimd@11c00000 {arch/arm/boot/dts/exynos4210-universal_c210.dts +14
-14@@ -181,20 +181,6 @@ }; }; -&amba { - mdma0: mdma@12840000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12840000 0x1000>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_MDMA>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; - power-domains = <&pd_lcd0>; - }; -}; - &camera { status = "okay";@@ -616,6 +602,20 @@ /delete-property/dma-names; }; +&soc { + mdma0: mdma@12840000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12840000 0x1000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_MDMA>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + power-domains = <&pd_lcd0>; + }; +}; + &sysram { smp-sram@0 { status = "disabled";arch/arm/boot/dts/exynos5250.dtsi +42
-50@@ -679,56 +679,48 @@ samsung,pmureg-phandle = <&pmu_system_controller>; }; - amba { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&gic>; - ranges; - - pdma0: pdma@121a0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121A0000 0x1000>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - pdma1: pdma@121b0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121B0000 0x1000>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - mdma0: mdma@10800000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x10800000 0x1000>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_MDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; - }; - - mdma1: mdma@11c10000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x11C10000 0x1000>; - interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_MDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; - }; + pdma0: pdma@121a0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121A0000 0x1000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@121b0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121B0000 0x1000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + mdma0: mdma@10800000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x10800000 0x1000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_MDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + }; + + mdma1: mdma@11c10000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x11C10000 0x1000>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_MDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; }; gsc_0: gsc@13e00000 {arch/arm/boot/dts/exynos5410.dtsi +19
-27@@ -189,34 +189,26 @@ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; }; - amba { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&gic>; - ranges; - - pdma0: pdma@121a0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121a0000 0x1000>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; + pdma0: pdma@121a0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121a0000 0x1000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; - pdma1: pdma@121b0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121b0000 0x1000>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; + pdma1: pdma@121b0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121b0000 0x1000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; };arch/arm/boot/dts/exynos5410.dtsi +0
-0audi2s0: i2s@3830000 {arch/arm/boot/dts/exynos5420.dtsi +11
-62@@ -433,76 +433,68 @@ power-domains = <&mau_pd>; }; - amba { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&gic>; - ranges; - - adma: adma@3880000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x03880000 0x1000>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock_audss EXYNOS_ADMA>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <6>; - #dma-requests = <16>; - power-domains = <&mau_pd>; - }; - - pdma0: pdma@121a0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121A0000 0x1000>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - pdma1: pdma@121b0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121B0000 0x1000>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - mdma0: mdma@10800000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x10800000 0x1000>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_MDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; - }; + adma: adma@3880000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x03880000 0x1000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock_audss EXYNOS_ADMA>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <6>; + #dma-requests = <16>; + power-domains = <&mau_pd>; + }; - mdma1: mdma@11c10000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x11C10000 0x1000>; - interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_MDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; - /* - * MDMA1 can support both secure and non-secure
arch/arm/boot/dts/exynos5420.dtsi +50
-8- * AXI transactions. When this is enabled in - * the kernel for boards that run in secure - * mode, we are getting imprecise external - * aborts causing the kernel to oops. - */ - status = "disabled"; - }; + pdma0: pdma@121a0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121A0000 0x1000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@121b0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121B0000 0x1000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + mdma0: mdma@10800000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x10800000 0x1000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_MDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + }; + + mdma1: mdma@11c10000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x11C10000 0x1000>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_MDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + /* + * MDMA1 can support both secure and non-secure + * AXI transactions. When this is enabled in + * the kernel for boards that run in secure + * mode, we are getting imprecise external + * aborts causing the kernel to oops. + */ + status = "disabled"; }; i2s0: i2s@3830000 { --2.17.1
Krzysztof Kozlowski
maintainerQuoted 14 lines · Krzysztof Kozlowski
There is no need to keep DMA controller nodes under AMBA bus node. Remove the "amba" node to fix dtschema warnings like:
amba: $nodename:0: 'amba' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'Signed-off-by Krzysztof Kozlowski <[email protected]>---
Changes since v2:
1. Keep the alphabetical order inexynos4210-universal_c210.dts, as suggested by MarekChanges since v1:
1. Remove the bus, as suggested by Marek
Quoted 7 lines
--- arch/arm/boot/dts/exynos3250.dtsi | 47 +++---- arch/arm/boot/dts/exynos4.dtsi | 70 +++++----- .../boot/dts/exynos4210-universal_c210.dts | 28 ++-- arch/arm/boot/dts/exynos5250.dtsi | 92 ++++++------- arch/arm/boot/dts/exynos5410.dtsi | 46 +++---- arch/arm/boot/dts/exynos5420.dtsi | 130 ++++++++----------
Thanks for testing and reviews. Applied.
Best regards,
Krzysztof