Revert "ARM: dts: stm32: Reinstate card detect behavior on ST boards"
Subsystems (2)
PATCH 1/1 Revert "ARM: dts: stm32: Reinstate card detect behavior on ST boards"
Since commit f13ff88b61c3 ("gpio: stm32: add ops set_dir_flags") the gpio flags are supported by stm32 pinctrl driver.
The cd-gpios is correctly handle in U-Boot and the patch on the device tree can be removed.
This reverts commit 792919241b3d750cd5295dfe6dd1d0958b9be468.
---
arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 2 -- arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 2 -- 2 files changed, 4 deletions(-)
arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi +0 -2
@@ -162,8 +162,6 @@ &sdmmc1 { u-boot,dm-spl; - broken-cd; - /delete-property/ cd-gpios; }; &sdmmc1_b4_pins_a {
arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi +0 -2
@@ -158,8 +158,6 @@ &sdmmc1 { u-boot,dm-spl; - broken-cd; - /delete-property/ cd-gpios; }; &sdmmc1_b4_pins_a {
Signature · 1 line
2.17.1
PATCH 1/1 Revert "ARM: dts: stm32: Reinstate card detect behavior on ST boards"
Quoted 33 lines · Patrick Delaunay
Since commit
f13ff88b61c3("gpio: stm32: add opsset_dir_flags") the gpio flags are supported by stm32 pinctrl driver.The cd-gpios is correctly handle in U-Boot and the patch on the device tree can be removed.
This reverts commit
792919241b3d750cd5295dfe6dd1d0958b9be468.Signed-off-by Patrick Delaunay <[email protected]>---
arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 2 -- arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 2 -- 2 files changed, 4 deletions(-)arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi +0
-2@@ -162,8 +162,6 @@ &sdmmc1 { u-boot,dm-spl; - broken-cd; - /delete-property/ cd-gpios; }; &sdmmc1_b4_pins_a {arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi +0
-0
arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi line 163
Quoted 8 lines
arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi +0
-2@@ -158,8 +158,6 @@ &sdmmc1 { u-boot,dm-spl; - broken-cd; - /delete-property/ cd-gpios; }; &sdmmc1_b4_pins_a {
Thanks
Patrice
PATCH 1/1 Revert "ARM: dts: stm32: Reinstate card detect behavior on ST boards"
Quoted 44 lines · Patrice CHOTARD
Quoted 33 lines · Patrick Delaunay
Since commit
f13ff88b61c3("gpio: stm32: add opsset_dir_flags") the gpio flags are supported by stm32 pinctrl driver.The cd-gpios is correctly handle in U-Boot and the patch on the device tree can be removed.
This reverts commit
792919241b3d750cd5295dfe6dd1d0958b9be468.Signed-off-by Patrick Delaunay <[email protected]>---
arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 2 -- arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 2 -- 2 files changed, 4 deletions(-)arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi +0
-2@@ -162,8 +162,6 @@ &sdmmc1 { u-boot,dm-spl; - broken-cd; - /delete-property/ cd-gpios; }; &sdmmc1_b4_pins_a {arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi +0
-0arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi line 163
Quoted 8 lines
arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi +0
-2@@ -158,8 +158,6 @@ &sdmmc1 { u-boot,dm-spl; - broken-cd; - /delete-property/ cd-gpios; }; &sdmmc1_b4_pins_a {Reviewed-by Patrice Chotard <[email protected]>
Quoted 7 lines
Thanks
Patrice
_______________________________________________
Uboot-stm32 mailing list
Uboot-stm32 at st-md-mailman.stormreply.com
https://st-md-mailman.stormreply.com/mailman/listinfo/uboot-stm32
Applied to u-boot-stm/master
Thanks
Patrice