usb: phy: Use fallthrough pseudo-keyword
Subsystems (3)
PATCH 1/1 usb: phy: Use fallthrough pseudo-keyword
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case.
Signed-off-by Gustavo A. R. Silva <[email protected]>
--- drivers/usb/phy/phy-ab8500-usb.c | 12 ++++++------ drivers/usb/phy/phy-fsl-usb.c | 4 ++-- drivers/usb/phy/phy-isp1301-omap.c | 14 +++++++------- drivers/usb/phy/phy-mv-usb.c | 2 +- 4 files changed, 16 insertions(+), 16 deletions(-)
drivers/usb/phy/phy-ab8500-usb.c +6 -6
@@ -331,7 +331,7 @@ static int ab8505_usb_link_status_update(struct ab8500_usb *ab,switch (lsts) {case USB_LINK_ACA_RID_B_8505 : event =UX500_MUSB_RIDB ; -/* Fall through */ + fallthrough;case USB_LINK_NOT_CONFIGURED_8505 :case USB_LINK_RESERVED0_8505 :case USB_LINK_RESERVED1_8505 :
@@ -352,7 +352,7 @@ static int ab8505_usb_link_status_update(struct ab8500_usb *ab,case USB_LINK_ACA_RID_C_NM_8505 : event =UX500_MUSB_RIDC ; -/* Fall through */ + fallthrough;case USB_LINK_STD_HOST_NC_8505 :case USB_LINK_STD_HOST_C_NS_8505 :case USB_LINK_STD_HOST_C_S_8505 :
@@ -371,7 +371,7 @@ static int ab8505_usb_link_status_update(struct ab8500_usb *ab,case USB_LINK_ACA_RID_A_8505 :case USB_LINK_ACA_DOCK_CHGR_8505 : event =UX500_MUSB_RIDA ; -/* Fall through */ + fallthrough;case USB_LINK_HM_IDGND_8505 :if (ab->mode ==USB_IDLE ) { ab->mode =USB_HOST ;
@@ -444,7 +444,7 @@ static int ab8500_usb_link_status_update(struct ab8500_usb *ab,switch (lsts) {case USB_LINK_ACA_RID_B_8500 : event =UX500_MUSB_RIDB ; -/* Fall through */ + fallthrough;case USB_LINK_NOT_CONFIGURED_8500 :case USB_LINK_NOT_VALID_LINK_8500 : ab->mode =USB_IDLE ;
@@ -461,7 +461,7 @@ static int ab8500_usb_link_status_update(struct ab8500_usb *ab,case USB_LINK_ACA_RID_C_HS_8500 :case USB_LINK_ACA_RID_C_HS_CHIRP_8500 : event =UX500_MUSB_RIDC ; -/* Fall through */ + fallthrough;case USB_LINK_STD_HOST_NC_8500 :case USB_LINK_STD_HOST_C_NS_8500 :case USB_LINK_STD_HOST_C_S_8500 :
@@ -481,7 +481,7 @@ static int ab8500_usb_link_status_update(struct ab8500_usb *ab,case USB_LINK_ACA_RID_A_8500 : event =UX500_MUSB_RIDA ; -/* Fall through */ + fallthrough;case USB_LINK_HM_IDGND_8500 :if (ab->mode ==USB_IDLE ) { ab->mode =USB_HOST ;
drivers/usb/phy/phy-fsl-usb.c +2 -2
@@ -911,10 +911,10 @@ int usb_otg_start(struct platform_device *pdev)break ;case FSL_USB2_PHY_UTMI_WIDE : temp |=PORTSC_PTW_16BIT ; -/* fall through */ + fallthrough;case FSL_USB2_PHY_UTMI : temp |=PORTSC_PTS_UTMI ; -/* fall through */ + fallthrough;default :break ; }
drivers/usb/phy/phy-isp1301-omap.c +7 -7
@@ -581,11 +581,11 @@ static void otg_update_isp(struct isp1301 *isp)/* HNP failed for some reason (A_AIDL_BDIS timeout) */ notresponding (isp); -/* FALLTHROUGH */ + fallthrough;case OTG_STATE_A_VBUS_ERR : isp->phy.otg->state =OTG_STATE_A_WAIT_VFALL ;pr_debug (" --> a_wait_vfall\n" ); -/* FALLTHROUGH */ + fallthrough;case OTG_STATE_A_WAIT_VFALL :/* FIXME usbcore thinks port power is still on ... */ clr |=OTG1_VBUS_DRV ;
@@ -595,7 +595,7 @@ static void otg_update_isp(struct isp1301 *isp) isp->phy.otg->state =OTG_STATE_A_WAIT_VRISE ;pr_debug (" --> a_wait_vrise\n" ); } -/* FALLTHROUGH */ + fallthrough;default :toggle (OTG_DRV_VBUS ,OTG1_VBUS_DRV ); }
@@ -945,10 +945,10 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat)switch (state) {case OTG_STATE_B_IDLE :a_idle (isp,"idle" ); -/* FALLTHROUGH */ + fallthrough;case OTG_STATE_A_IDLE :enable_vbus_source (isp); -/* FALLTHROUGH */ + fallthrough;case OTG_STATE_A_WAIT_VRISE :/* we skip over OTG_STATE_A_WAIT_BCON, since * the HC will transition to A_HOST (or
@@ -1032,12 +1032,12 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat) OTG1_DP_PULLUP);dump_regs (isp, __func__);#endif -/* FALLTHROUGH */ + fallthrough;case OTG_STATE_B_SRP_INIT :b_idle (isp, __func__); l =omap_readl (OTG_CTRL ) &OTG_XCEIV_OUTPUTS ;omap_writel (l,OTG_CTRL ); -/* FALLTHROUGH */ + fallthrough;case OTG_STATE_B_IDLE :if (otg->gadget && (isp_bstat &OTG_B_SESS_VLD )) {#ifdef CONFIG_USB_OTG
drivers/usb/phy/phy-mv-usb.c +1 -1
@@ -334,7 +334,7 @@ static void mv_otg_update_state(struct mv_otg *mvotg)switch (old_state) {case OTG_STATE_UNDEFINED : mvotg->phy.otg->state =OTG_STATE_B_IDLE ; -/* FALL THROUGH */ + fallthrough;case OTG_STATE_B_IDLE :if (otg_ctrl->id ==0 ) mvotg->phy.otg->state =OTG_STATE_A_IDLE ;