Skip to contentSkip to conversation

softmmu/vl: Be less verbose about missing KVM when running the qtests

PATCH In review Thomas Huth 3 participants 3 messages Jul 10, 2020 – Jul 27, 2020

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 softmmu/vl: Be less verbose about missing KVM when running the qtests

Some of the qtests use "-accel kvm -accel tcg" to run real guest code. This causes some error messages when kvm is not available. We do not really care about these messages since the fallback to tcg is expected here. So let's silence them to avoid that they spoil the output of the tests.

Unfortunately, we can not use the qtest_enabled() wrapper in this case, since the qtest accelerator itself is not initialized. Thus we have to test for the qtest_chrdev variable instead.

---
 softmmu/vl.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)
softmmu/vl.c +12 -7
index 3f58ffd4dc..0066f50fb2 100644
@@ -164,8 +164,9 @@ bool boot_strict;
 uint8_t *boot_splash_filedata;
 int only_migratable; /* turn it off unless user states otherwise */
 bool wakeup_suspend_enabled;
-
 int icount_align_option;
+static const char *qtest_chrdev;
+static const char *qtest_log;
 
 /* The bytes in qemu_uuid are in the order specified by RFC4122, _not_ in the
  * little-endian "wire format" described in the SMBIOS 2.6 specification.
@@ -2693,10 +2694,15 @@ static int do_configure_accelerator(void *opaque, QemuOpts *opts, Error **errp)
     AccelClass *ac = accel_find(acc);
     AccelState *accel;
     int ret;
+    bool qtest_with_kvm;
+
+    qtest_with_kvm = g_str_equal(acc, "kvm") && qtest_chrdev != NULL;
 
     if (!ac) {
         *p_init_failed = true;
-        error_report("invalid accelerator %s", acc);
+        if (!qtest_with_kvm) {
+            error_report("invalid accelerator %s", acc);
+        }
         return 0;
     }
     accel = ACCEL(object_new_with_class(OBJECT_CLASS(ac)));
@@ -2708,8 +2714,9 @@ static int do_configure_accelerator(void *opaque, QemuOpts *opts, Error **errp)
     ret = accel_init_machine(accel, current_machine);
     if (ret < 0) {
         *p_init_failed = true;
-        error_report("failed to initialize %s: %s",
-                     acc, strerror(-ret));
+        if (!qtest_with_kvm || ret != -ENOENT) {
+            error_report("failed to initialize %s: %s", acc, strerror(-ret));
+        }
         return 0;
     }
 
@@ -2780,7 +2787,7 @@ static void configure_accelerators(const char *progname)
         exit(1);
     }
 
-    if (init_failed) {
+    if (init_failed && !qtest_chrdev) {
         AccelClass *ac = ACCEL_GET_CLASS(current_accel());
         error_report("falling back to %s", ac->name);
     }
@@ -2830,8 +2837,6 @@ void qemu_init(int argc, char **argv, char **envp)
     MachineClass *machine_class;
     const char *cpu_option;
     const char *vga_model = NULL;
-    const char *qtest_chrdev = NULL;
-    const char *qtest_log = NULL;
     const char *incoming = NULL;
     bool userconfig = true;
     bool nographic = false;
Signature · 1 line
2.18.1
Reviewed-by on v1 1/1
#1 lore raw
Quoted 11 lines · Thomas Huth

Some of the qtests use "-accel kvm -accel tcg" to run real guest code. This causes some error messages when kvm is not available. We do not really care about these messages since the fallback to tcg is expected here. So let's silence them to avoid that they spoil the output of the tests.

Unfortunately, we can not use the qtest_enabled() wrapper in this case, since the qtest accelerator itself is not initialized. Thus we have to test for the qtest_chrdev variable instead.

Quoted 70 lines
---
 softmmu/vl.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)
softmmu/vl.c +12 -7
index 3f58ffd4dc..0066f50fb2 100644
@@ -164,8 +164,9 @@ bool boot_strict;
 uint8_t *boot_splash_filedata;
 int only_migratable; /* turn it off unless user states otherwise */
 bool wakeup_suspend_enabled;
-
 int icount_align_option;
+static const char *qtest_chrdev;
+static const char *qtest_log;
 
 /* The bytes in qemu_uuid are in the order specified by RFC4122, _not_ in the
  * little-endian "wire format" described in the SMBIOS 2.6 specification.
@@ -2693,10 +2694,15 @@ static int do_configure_accelerator(void *opaque, QemuOpts *opts, Error **errp)
     AccelClass *ac = accel_find(acc);
     AccelState *accel;
     int ret;
+    bool qtest_with_kvm;
+
+    qtest_with_kvm = g_str_equal(acc, "kvm") && qtest_chrdev != NULL;
 
     if (!ac) {
         *p_init_failed = true;
-        error_report("invalid accelerator %s", acc);
+        if (!qtest_with_kvm) {
+            error_report("invalid accelerator %s", acc);
+        }
         return 0;
     }
     accel = ACCEL(object_new_with_class(OBJECT_CLASS(ac)));
@@ -2708,8 +2714,9 @@ static int do_configure_accelerator(void *opaque, QemuOpts *opts, Error **errp)
     ret = accel_init_machine(accel, current_machine);
     if (ret < 0) {
         *p_init_failed = true;
-        error_report("failed to initialize %s: %s",
-                     acc, strerror(-ret));
+        if (!qtest_with_kvm || ret != -ENOENT) {
+            error_report("failed to initialize %s: %s", acc, strerror(-ret));
+        }
         return 0;
     }
 
@@ -2780,7 +2787,7 @@ static void configure_accelerators(const char *progname)
         exit(1);
     }
 
-    if (init_failed) {
+    if (init_failed && !qtest_chrdev) {
         AccelClass *ac = ACCEL_GET_CLASS(current_accel());
         error_report("falling back to %s", ac->name);
     }
@@ -2830,8 +2837,6 @@ void qemu_init(int argc, char **argv, char **envp)
     MachineClass *machine_class;
     const char *cpu_option;
     const char *vga_model = NULL;
-    const char *qtest_chrdev = NULL;
-    const char *qtest_log = NULL;
     const char *incoming = NULL;
     bool userconfig = true;
     bool nographic = false;
Signature · 1 line
2.18.1
#2 lore raw
In reply to Thomas Huth
Quoted 9 lines · Thomas Huth

Some of the qtests use "-accel kvm -accel tcg" to run real guest code. This causes some error messages when kvm is not available. We do not really care about these messages since the fallback to tcg is expected here. So let's silence them to avoid that they spoil the output of the tests.

Unfortunately, we can not use the qtest_enabled() wrapper in this case, since the qtest accelerator itself is not initialized. Thus we have to test for the qtest_chrdev variable instead.

I wonder if "-accel kvm -accel tcg" should warn at all. I can understand warning if we're running some /usr/bin/qemu-kvm binary, but in this case the user has explicitly asked for a fallback.

Paolo