Skip to contentSkip to conversation

arm64: tegra: A few DT updates for Tegra

PATCH Applied Jon Hunter 2 participants 8 messages Jul 12, 2020 – Jul 14, 2020

Subsystems (2)
lore
Share & tools
lore

Jon Hunter

author maintainer
#0 lore raw

cover arm64: tegra: A few DT updates for Tegra

This series adds ...

1. Support for Tegra19 Jetson Xavier NX
2. Support for the DFLL on Tegra210 Jetson Nano
3. Fixes VBUS supply for Tegra186 Jetson TX2

Jon Hunter (2):
arm64: tegra: Enable DFLL support on Jetson Nano
arm64: tegra: Populate VBUS for USB3 on Jetson TX2

Thierry Reding (1):
arm64: tegra: Add support for Jetson Xavier NX

 arch/arm64/boot/dts/nvidia/Makefile           |   1 +
 .../boot/dts/nvidia/tegra186-p2771-0000.dts   |   1 +
 .../nvidia/tegra194-p3509-0000+p3668-0000.dts | 343 ++++++++++++++++++
 .../boot/dts/nvidia/tegra194-p3668-0000.dtsi  | 296 +++++++++++++++
 .../boot/dts/nvidia/tegra210-p3450-0000.dts   |  37 ++
 5 files changed, 678 insertions(+)
 create mode 100644 arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts
 create mode 100644 arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi
Signature · 1 line
2.17.1
author maintainer
#1 lore raw

PATCH 1/3 arm64: tegra: Add support for Jetson Xavier NX

From: Thierry Reding <[email protected]>

Add the device-tree source files for the Tegra194 Jetson Xavier NX Developer Kit. The Xavier NX Developer Kit consists of a small form factor system-on-module (SOM) board (part number p3668-0000) and a carrier board (part number p3509-0000).

The Xavier NX Developer Kit SOM features a micro-SD card slot, however, there is also a variant of the SOM available that features a 16GB eMMC. Given that the carrier board can be used with the different SOM variants, that have different part numbers, both the compatible string and file name of the device-tree source file for the Developer Kit is a concatenation of the SOM and carrier board part numbers.

---
 arch/arm64/boot/dts/nvidia/Makefile           |   1 +
 .../nvidia/tegra194-p3509-0000+p3668-0000.dts | 343 ++++++++++++++++++
 .../boot/dts/nvidia/tegra194-p3668-0000.dtsi  | 296 +++++++++++++++
 3 files changed, 640 insertions(+)
 create mode 100644 arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts
 create mode 100644 arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi
arch/arm64/boot/dts/nvidia/Makefile +1 -0
index bcd018c3162b..2273fc5db19c 100644
@@ -8,3 +8,4 @@ dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb
 dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2894-0050-a08.dtb
 dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb
 dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p2972-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0000.dtb
arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts new file +343 -0

343 lines not on this page · raw message

arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi new file +296 -0

296 lines not on this page · raw message

Signature · 1 line
2.17.1
author maintainer
#4 lore raw

PATCH 2/3 arm64: tegra: Enable DFLL support on Jetson Nano

In reply to Jon Hunter

Populate the DFLL node and corresponding PWM pin nodes in order to enable CPUFREQ support on the Jetson Nano platform.

---
 .../boot/dts/nvidia/tegra210-p3450-0000.dts   | 37 +++++++++++++++++++
 1 file changed, 37 insertions(+)
arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +37 -0
index 9b6346917ea9..2282ea1c6279 100644
@@ -111,6 +111,22 @@
 		status = "okay";
 	};
 
+	pinmux@700008d4 {
+		dvfs_pwm_active_state: dvfs_pwm_active {
+			dvfs_pwm_pbb1 {
+				nvidia,pins = "dvfs_pwm_pbb1";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+		};
+
+		dvfs_pwm_inactive_state: dvfs_pwm_inactive {
+			dvfs_pwm_pbb1 {
+				nvidia,pins = "dvfs_pwm_pbb1";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
 	/* debug port */
 	serial@70006000 {
 		status = "okay";
@@ -584,6 +600,27 @@
 		hvdd-usb-supply = <&vdd_1v8>;
 	};
 
+	clock@70110000 {
+		status = "okay";
+
+		nvidia,cf = <6>;
+		nvidia,ci = <0>;
+		nvidia,cg = <2>;
+		nvidia,droop-ctrl = <0x00000f00>;
+		nvidia,force-mode = <1>;
+		nvidia,sample-rate = <25000>;
+
+		nvidia,pwm-min-microvolts = <708000>;
+		nvidia,pwm-period-nanoseconds = <2500>; /* 2.5us */
+		nvidia,pwm-to-pmic;
+		nvidia,pwm-tristate-microvolts = <1000000>;
+		nvidia,pwm-voltage-step-microvolts = <19200>;
+
+		pinctrl-names = "dvfs_pwm_enable", "dvfs_pwm_disable";
+		pinctrl-0 = <&dvfs_pwm_active_state>;
+		pinctrl-1 = <&dvfs_pwm_inactive_state>;
+	};
+
 	clk32k_in: clock@0 {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
Signature · 1 line
2.17.1
author maintainer
#6 lore raw

PATCH 3/3 arm64: tegra: Populate VBUS for USB3 on Jetson TX2

In reply to Jon Hunter

The VBUS for USB3 connector on the Jetson TX2 is connected to the vdd_usb1 supply and although this is populated for the USB2 port on the USB3 connector it is not populated for the USB3 port and causes the following warning to be seen on boot ...

usb3-0: supply vbus not found, using dummy regulator

Fix this by also adding the VBUS supply to the USB3 port.

---
 arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +1 -0
index a70fd4e86840..802b8c52489a 100644
@@ -194,6 +194,7 @@
 
 			usb3-0 {
 				nvidia,usb2-companion = <1>;
+				vbus-supply = <&vdd_usb1>;
 				status = "okay";
 			};
 		};
Signature · 1 line
2.17.1
author maintainer
#2 lore raw

PATCH RESEND 1/1 arm64: tegra: Add support for Jetson Xavier NX

In reply to Jon Hunter

Add the device-tree source files for the Tegra194 Jetson Xavier NX Developer Kit. The Xavier NX Developer Kit consists of a small form factor system-on-module (SOM) board (part number p3668-0000) and a carrier board (part number p3509-0000).

The Xavier NX Developer Kit SOM features a micro-SD card slot, however, there is also a variant of the SOM available that features a 16GB eMMC. Given that the carrier board can be used with the different SOM variants, that have different part numbers, both the compatible string and file name of the device-tree source file for the Developer Kit is a concatenation of the SOM and carrier board part numbers.

This is based upon some initial work by Thierry Reding <[email protected]>.

---

I have updated the author and given credit to Thierry for doing the initial work on the change.

 arch/arm64/boot/dts/nvidia/Makefile           |   1 +
 .../nvidia/tegra194-p3509-0000+p3668-0000.dts | 343 ++++++++++++++++++
 .../boot/dts/nvidia/tegra194-p3668-0000.dtsi  | 296 +++++++++++++++
 3 files changed, 640 insertions(+)
 create mode 100644 arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts
 create mode 100644 arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi
arch/arm64/boot/dts/nvidia/Makefile +1 -0
index bcd018c3162b..2273fc5db19c 100644
@@ -8,3 +8,4 @@ dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb
 dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2894-0050-a08.dtb
 dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb
 dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p2972-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0000.dtb
arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts new file +343 -0

343 lines not on this page · raw message

arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi new file +296 -0

296 lines not on this page · raw message

Signature · 1 line
2.17.1
#3 lore raw

Re: [RESEND PATCH] arm64: tegra: Add support for Jetson Xavier NX

Quoted 21 lines · Jon Hunter

Add the device-tree source files for the Tegra194 Jetson Xavier NX Developer Kit. The Xavier NX Developer Kit consists of a small form factor system-on-module (SOM) board (part number p3668-0000) and a carrier board (part number p3509-0000).

The Xavier NX Developer Kit SOM features a micro-SD card slot, however, there is also a variant of the SOM available that features a 16GB eMMC. Given that the carrier board can be used with the different SOM variants, that have different part numbers, both the compatible string and file name of the device-tree source file for the Developer Kit is a concatenation of the SOM and carrier board part numbers.

This is based upon some initial work by Thierry Reding <[email protected]>.

---

I have updated the author and given credit to Thierry for doing the initial work on the change.

Quoted 6 lines
 arch/arm64/boot/dts/nvidia/Makefile           |   1 +
 .../nvidia/tegra194-p3509-0000+p3668-0000.dts | 343 ++++++++++++++++++
 .../boot/dts/nvidia/tegra194-p3668-0000.dtsi  | 296 +++++++++++++++
 3 files changed, 640 insertions(+)
 create mode 100644 arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts
 create mode 100644 arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi

I need this patch to avoid an error being flagged by checkpatch:

--- >8 ---

Documentation/devicetree/bindings/arm/tegra.yaml +8 -0
index 60b38eb5c61a..53845db64df1 100644
@@ -101,3 +101,11 @@ properties:
           - enum:
               - nvidia,p2972-0000
           - const: nvidia,tegra194
+      - description: Jetson Xavier NX
+        items:
+          - const: nvidia,p3668-0000
+          - const: nvidia,tegra194
+      - description: Jetson Xavier NX Developer Kit
+        items:
+          - const: nvidia,p3509-0000+p3668-0000
+          - const: nvidia,tegra194

--- >8---

I'll submit that separately and have applied this one in the meantime.

Thanks,
Thierry

#5 lore raw

Re: [PATCH 2/3] arm64: tegra: Enable DFLL support on Jetson Nano

In reply to Jon Hunter
Quoted 7 lines · Jon Hunter

Populate the DFLL node and corresponding PWM pin nodes in order to enable CPUFREQ support on the Jetson Nano platform.

---
 .../boot/dts/nvidia/tegra210-p3450-0000.dts   | 37 +++++++++++++++++++
 1 file changed, 37 insertions(+)

Applied, thanks.

Thierry

#7 lore raw

Re: [PATCH 3/3] arm64: tegra: Populate VBUS for USB3 on Jetson TX2

In reply to Jon Hunter
Quoted 5 lines · Jon Hunter

The VBUS for USB3 connector on the Jetson TX2 is connected to the vdd_usb1 supply and although this is populated for the USB2 port on the USB3 connector it is not populated for the USB3 port and causes the following warning to be seen on boot ...

Quoted 8 lines

usb3-0: supply vbus not found, using dummy regulator

Fix this by also adding the VBUS supply to the USB3 port.

---
 arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 1 +
 1 file changed, 1 insertion(+)

Applied, thanks.

Thierry