Skip to contentSkip to conversation

drm/amdgpu: Fix NULL dereference in dpm sysfs handlers

PATCH Applied Paweł Gronowski 2 participants 2 messages Jul 19, 2020 – Jul 21, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drm/amdgpu: Fix NULL dereference in dpm sysfs handlers

NULL dereference occurs when string that is not ended with space or newline is written to some dpm sysfs interface (for example pp_dpm_sclk). This happens because strsep replaces the tmp with NULL if the delimiter is not present in string, which is then dereferenced by tmp[0].

Reproduction example:
sudo sh -c 'echo -n 1 > /sys/class/drm/card0/device/pp_dpm_sclk'

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +3 -6
index 02e6f8c4dde0..ebb8a28ff002 100644
@@ -778,8 +778,7 @@ static ssize_t amdgpu_set_pp_od_clk_voltage(struct device *dev,
 		tmp_str++;
 	while (isspace(*++tmp_str));
 
-	while (tmp_str[0]) {
-		sub_str = strsep(&tmp_str, delimiter);
+	while ((sub_str = strsep(&tmp_str, delimiter)) != NULL) {
 		ret = kstrtol(sub_str, 0, &parameter[parameter_size]);
 		if (ret)
 			return -EINVAL;
@@ -1039,8 +1038,7 @@ static ssize_t amdgpu_read_mask(const char *buf, size_t count, uint32_t *mask)
 	memcpy(buf_cpy, buf, bytes);
 	buf_cpy[bytes] = '\0';
 	tmp = buf_cpy;
-	while (tmp[0]) {
-		sub_str = strsep(&tmp, delimiter);
+	while ((sub_str = strsep(&tmp, delimiter)) != NULL) {
 		if (strlen(sub_str)) {
 			ret = kstrtol(sub_str, 0, &level);
 			if (ret)
@@ -1637,8 +1635,7 @@ static ssize_t amdgpu_set_pp_power_profile_mode(struct device *dev,
 			i++;
 		memcpy(buf_cpy, buf, count-i);
 		tmp_str = buf_cpy;
-		while (tmp_str[0]) {
-			sub_str = strsep(&tmp_str, delimiter);
+		while ((sub_str = strsep(&tmp_str, delimiter)) != NULL) {
 			ret = kstrtol(sub_str, 0, &parameter[parameter_size]);
 			if (ret)
 				return -EINVAL;
Signature · 6 lines
2.25.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
Applied
#1 lore raw

Applied. Thanks!

Alex

Quoted 51 lines · Paweł Gronowski

NULL dereference occurs when string that is not ended with space or newline is written to some dpm sysfs interface (for example pp_dpm_sclk). This happens because strsep replaces the tmp with NULL if the delimiter is not present in string, which is then dereferenced by tmp[0].

Reproduction example:
sudo sh -c 'echo -n 1 > /sys/class/drm/card0/device/pp_dpm_sclk'

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +3 -7
index 02e6f8c4dde0..ebb8a28ff002 100644
@@ -778,8 +778,7 @@ static ssize_t amdgpu_set_pp_od_clk_voltage(struct device *dev,
                tmp_str++;
        while (isspace(*++tmp_str));
 
-       while (tmp_str[0]) {
-               sub_str = strsep(&tmp_str, delimiter);
+       while ((sub_str = strsep(&tmp_str, delimiter)) != NULL) {
                ret = kstrtol(sub_str, 0, &parameter[parameter_size]);
                if (ret)
                        return -EINVAL;
@@ -1039,8 +1038,7 @@ static ssize_t amdgpu_read_mask(const char *buf, size_t count, uint32_t *mask)
        memcpy(buf_cpy, buf, bytes);
        buf_cpy[bytes] = '\0';
        tmp = buf_cpy;
-       while (tmp[0]) {
-               sub_str = strsep(&tmp, delimiter);
+       while ((sub_str = strsep(&tmp, delimiter)) != NULL) {
                if (strlen(sub_str)) {
                        ret = kstrtol(sub_str, 0, &level);
                        if (ret)
@@ -1637,8 +1635,7 @@ static ssize_t amdgpu_set_pp_power_profile_mode(struct device *dev,
                        i++;
                memcpy(buf_cpy, buf, count-i);
                tmp_str = buf_cpy;
-               while (tmp_str[0]) {
-                       sub_str = strsep(&tmp_str, delimiter);
+               while ((sub_str = strsep(&tmp_str, delimiter)) != NULL) {
                        ret = kstrtol(sub_str, 0, &parameter[parameter_size]);
                        if (ret)
                                return -EINVAL;
--

2.25.1

Quoted 4 lines

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx