usb: xhci: Prepare xHCI driver for MIPS Octeon big-endian support
Subsystems (2)
v2 cover usb: xhci: Prepare xHCI driver for MIPS Octeon big-endian support
These patches fix a few issues, found while porting the xHCI to the MIPS Octeon platforms. The basic issues here are:
- Endianess issues: missing cpu_to_leXX() & leXX_to_cpu() conversions
- Use physical (DMA) address for the xHCI DMA controller
These patches are the groundwork for the upcoming xHCI Octeon support that will follow soon.
Thanks,
Stefan
Changes in v2:
- Add missing (uintptr_t) cast to remove compile time warning
Stefan Roese (4):
usb: xhci: Add missing endian conversions (cpu_to_leXX / leXX_to_cpu)
usb: xhci: xhci_mem_init: Use cpu_to_le64() and not xhci_writeq()
usb: usb-uclass.c: Drop le16_to_cpu() as values are already swapped
usb: xhci: Add virt_to_phys() to support mapped platforms
drivers/usb/host/usb-uclass.c | 8 ++++---- drivers/usb/host/xhci-mem.c | 30 +++++++++++++++--------------- drivers/usb/host/xhci-ring.c | 8 ++++---- drivers/usb/host/xhci.c | 3 +-- 4 files changed, 24 insertions(+), 25 deletions(-)
Signature · 1 line
2.27.0
PATCH v2 1/4 usb: xhci: Add missing endian conversions (cpu_to_leXX / leXX_to_cpu)
While trying to use the U-Boot xHCI driver on the MIPS Octeon platform, which is big endian, I noticed that the driver is missing a few endian conversion calls. This patch adds these missing endian conversion calls.
---
Changes in v2:
- Add missing (uintptr_t) cast to remove compile time warning
drivers/usb/host/xhci-mem.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/usb/host/xhci-mem.c +5 -4
@@ -110,7 +110,7 @@ static void xhci_scratchpad_free(struct xhci_ctrl *ctrl) ctrl->dcbaa->dev_context_ptrs[0 ] =0 ; -free ((void *)(uintptr_t )ctrl->scratchpad->sp_array[0 ]); +free ((void *)(uintptr_t )le64_to_cpu (ctrl->scratchpad->sp_array[0 ]));free (ctrl->scratchpad->sp_array);free (ctrl->scratchpad); ctrl->scratchpad =NULL ;
@@ -225,7 +225,8 @@ static void xhci_link_segments(struct xhci_segment *prev, prev->next = next;if (link_trbs) { val_64 = (uintptr_t )next->trbs; - prev->trbs[TRBS_PER_SEGMENT -1 ].link.segment_ptr = val_64; + prev->trbs[TRBS_PER_SEGMENT -1 ].link.segment_ptr = +cpu_to_le64 (val_64);/* * Set the last TRB in the segment to
@@ -486,7 +487,7 @@ int xhci_alloc_virt_device(struct xhci_ctrl *ctrl, unsigned int slot_id) byte_64 = (uintptr_t )(virt_dev->out_ctx->bytes);/* Point to output device context in dcbaa. */ - ctrl->dcbaa->dev_context_ptrs[slot_id] = byte_64; + ctrl->dcbaa->dev_context_ptrs[slot_id] =cpu_to_le64 (byte_64);xhci_flush_cache ((uintptr_t )&ctrl->dcbaa->dev_context_ptrs[slot_id],sizeof (__le64));
@@ -768,7 +769,7 @@ void xhci_setup_addressable_virt_dev(struct xhci_ctrl *ctrl,debug ("route string %x\n" , route);#endif - slot_ctx->dev_info |= route; + slot_ctx->dev_info |=cpu_to_le32 (route);switch (speed) {case USB_SPEED_SUPER :
Signature · 1 line
2.27.0
PATCH v2 2/4 usb: xhci: xhci_mem_init: Use cpu_to_le64() and not xhci_writeq()
In reply to Stefan Roesexhci_writeq() makes the CPU->LE swapping only when addressing registers in the xHCI controller address range and not in the local memory (RAM). We need to use cpu_to_le64() here to ensure that the conversion is done correctly.
---
(no changes since v1)
drivers/usb/host/xhci-mem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/host/xhci-mem.c +1 -1
@@ -562,7 +562,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr, trb_64 =0 ; trb_64 = (uintptr_t )seg->trbs;struct xhci_erst_entry *entry = &ctrl->erst.entries[val]; -xhci_writeq (&entry->seg_addr, trb_64); + entry->seg_addr =cpu_to_le64 (trb_64); entry->seg_size =cpu_to_le32 (TRBS_PER_SEGMENT ); entry->rsvd =0 ; seg = seg->next;
Signature · 1 line
2.27.0
PATCH v2 3/4 usb: usb-uclass.c: Drop le16_to_cpu() as values are already swapped
In reply to Stefan RoeseThese values are already swapped to CPU endianess, so swapping them again is a bug. Let's remove the swap here instead.
---
(no changes since v1)
drivers/usb/host/usb-uclass.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/usb/host/usb-uclass.c +4 -4
@@ -416,21 +416,21 @@ static int usb_match_device(const struct usb_device_descriptor *desc, const struct usb_device_id *id) {if ((id->match_flags &USB_DEVICE_ID_MATCH_VENDOR ) && - id->idVendor !=le16_to_cpu (desc->idVendor)) + id->idVendor != desc->idVendor)return 0 ;if ((id->match_flags &USB_DEVICE_ID_MATCH_PRODUCT ) && - id->idProduct !=le16_to_cpu (desc->idProduct)) + id->idProduct != desc->idProduct)return 0 ;/* No need to test id->bcdDevice_lo != 0, since 0 is never greater than any unsigned number. */ if ((id->match_flags &USB_DEVICE_ID_MATCH_DEV_LO ) && - (id->bcdDevice_lo >le16_to_cpu (desc->bcdDevice))) + (id->bcdDevice_lo > desc->bcdDevice))return 0 ;if ((id->match_flags &USB_DEVICE_ID_MATCH_DEV_HI ) && - (id->bcdDevice_hi <le16_to_cpu (desc->bcdDevice))) + (id->bcdDevice_hi < desc->bcdDevice))return 0 ; if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) &&
Signature · 1 line
2.27.0
PATCH v2 4/4 usb: xhci: Add virt_to_phys() to support mapped platforms
In reply to Stefan RoeseSome platforms, like MIPS Octeon, use mapped addresses (virtual address != physical address). On these platforms we need to make sure, that the local virtual addresses are converted to physical (DMA) addresses for the xHCI controller. This patch adds the missing virt_to_phys() calls, so that the correct addresses are used.
---
(no changes since v1)
drivers/usb/host/xhci-mem.c | 19 +++++++++---------- drivers/usb/host/xhci-ring.c | 8 ++++---- drivers/usb/host/xhci.c | 3 +-- 3 files changed, 14 insertions(+), 16 deletions(-)
drivers/usb/host/xhci-mem.c +9 -10
@@ -224,7 +224,7 @@ static void xhci_link_segments(struct xhci_segment *prev,return ; prev->next = next;if (link_trbs) { - val_64 = (uintptr_t )next->trbs; + val_64 =virt_to_phys (next->trbs); prev->trbs[TRBS_PER_SEGMENT -1 ].link.segment_ptr =cpu_to_le64 (val_64);
@@ -484,7 +484,7 @@ int xhci_alloc_virt_device(struct xhci_ctrl *ctrl, unsigned int slot_id)/* Allocate endpoint 0 ring */ virt_dev->eps[0 ].ring =xhci_ring_alloc (1 , true); - byte_64 = (uintptr_t )(virt_dev->out_ctx->bytes); + byte_64 =virt_to_phys (virt_dev->out_ctx->bytes);/* Point to output device context in dcbaa. */ ctrl->dcbaa->dev_context_ptrs[slot_id] =cpu_to_le64 (byte_64);
@@ -509,7 +509,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr,uint64_t val_64;uint64_t trb_64;uint32_t val; -unsigned long deq; +uint64_t deq;int i;struct xhci_segment *seg;
@@ -521,7 +521,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr,return -ENOMEM ; } - val_64 = (uintptr_t )ctrl->dcbaa; + val_64 =virt_to_phys (ctrl->dcbaa);/* Set the pointer in DCBAA register */ xhci_writeq (&hcor->or_dcbaap, val_64);
@@ -529,7 +529,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr, ctrl->cmd_ring =xhci_ring_alloc (1 , true);/* Set the address in the Command Ring Control register */ - trb_64 = (uintptr_t )ctrl->cmd_ring->first_seg->trbs; + trb_64 =virt_to_phys (ctrl->cmd_ring->first_seg->trbs); val_64 =xhci_readq (&hcor->or_crcr); val_64 = (val_64 & (u64 )CMD_RING_RSVD_BITS ) | (trb_64 & (u64) ~CMD_RING_RSVD_BITS) |
@@ -559,8 +559,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr,for (val =0 , seg = ctrl->event_ring->first_seg; val <ERST_NUM_SEGS ; val++) { - trb_64 =0 ; - trb_64 = (uintptr_t )seg->trbs; + trb_64 =virt_to_phys (seg->trbs);struct xhci_erst_entry *entry = &ctrl->erst.entries[val]; entry->seg_addr =cpu_to_le64 (trb_64); entry->seg_size =cpu_to_le32 (TRBS_PER_SEGMENT );
@@ -570,7 +569,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr,xhci_flush_cache ((uintptr_t )ctrl->erst.entries,ERST_NUM_SEGS *sizeof (struct xhci_erst_entry )); - deq = (unsigned long )ctrl->event_ring->dequeue; + deq =virt_to_phys (ctrl->event_ring->dequeue);/* Update HC event ring dequeue pointer */ xhci_writeq(&ctrl->ir_set->erst_dequeue,
@@ -585,7 +584,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr,/* this is the event ring segment table pointer */ val_64 =xhci_readq (&ctrl->ir_set->erst_base); val_64 &=ERST_PTR_MASK ; - val_64 |= ((uintptr_t )(ctrl->erst.entries) & ~ERST_PTR_MASK ); + val_64 |=virt_to_phys (ctrl->erst.entries) & ~ERST_PTR_MASK ;xhci_writeq (&ctrl->ir_set->erst_base, val_64);
@@ -853,7 +852,7 @@ void xhci_setup_addressable_virt_dev(struct xhci_ctrl *ctrl,cpu_to_le32 (((0 &MAX_BURST_MASK ) <<MAX_BURST_SHIFT ) | ((3 &ERROR_COUNT_MASK ) <<ERROR_COUNT_SHIFT )); - trb_64 = (uintptr_t )virt_dev->eps[0 ].ring->first_seg->trbs; + trb_64 =virt_to_phys (virt_dev->eps[0 ].ring->first_seg->trbs); ep0_ctx->deq =cpu_to_le64 (trb_64 | virt_dev->eps[0 ].ring->cycle_state);/*
drivers/usb/host/xhci-ring.c +4 -4
@@ -275,7 +275,7 @@ void xhci_queue_command(struct xhci_ctrl *ctrl, u8 *ptr, u32 slot_id, u32 ep_index, trb_type cmd) {u32 fields[4 ]; -u64 val_64 = (uintptr_t )ptr; +u64 val_64 =virt_to_phys (ptr);BUG_ON (prepare_ring (ctrl, ctrl->cmd_ring,EP_STATE_RUNNING ));
@@ -399,7 +399,7 @@ void xhci_acknowledge_event(struct xhci_ctrl *ctrl)/* Inform the hardware */ xhci_writeq (&ctrl->ir_set->erst_dequeue, - (uintptr_t )ctrl->event_ring->dequeue |ERST_EHB ); +virt_to_phys (ctrl->event_ring->dequeue) |ERST_EHB ); }/**
@@ -577,7 +577,7 @@ int xhci_bulk_tx(struct usb_device *udev, unsigned long pipe,u64 addr;int ret;u32 trb_fields[4 ]; -u64 val_64 = (uintptr_t )buffer; +u64 val_64 =virt_to_phys (buffer);debug ("dev=%p, pipe=%lx, buffer=%p, length=%d\n" , udev, pipe, buffer, length);
@@ -876,7 +876,7 @@ int xhci_ctrl_tx(struct usb_device *udev, unsigned long pipe,if (length >0 ) {if (req->requesttype &USB_DIR_IN ) field |=TRB_DIR_IN ; - buf_64 = (uintptr_t )buffer; + buf_64 =virt_to_phys (buffer); trb_fields[0 ] =lower_32_bits (buf_64); trb_fields[1 ] =upper_32_bits (buf_64);
drivers/usb/host/xhci.c +1 -2
@@ -600,8 +600,7 @@ static int xhci_set_configuration(struct usb_device *udev)cpu_to_le32 (MAX_BURST (max_burst) |ERROR_COUNT (err_count)); - trb_64 = (uintptr_t ) - virt_dev->eps[ep_index].ring->enqueue; + trb_64 =virt_to_phys (virt_dev->eps[ep_index].ring->enqueue); ep_ctx[ep_index]->deq =cpu_to_le64 (trb_64 | virt_dev->eps[ep_index].ring->cycle_state);
Signature · 1 line
2.27.0
v2 cover usb: xhci: Prepare xHCI driver for MIPS Octeon big-endian support
In reply to Stefan RoeseHi Bin,
Quoted 22 lines · Stefan Roese
These patches fix a few issues, found while porting the xHCI to the MIPS Octeon platforms. The basic issues here are:
- Endianess issues: missing
cpu_to_leXX()&leXX_to_cpu()conversions
- Use physical (DMA) address for the xHCI DMA controllerThese patches are the groundwork for the upcoming xHCI Octeon support that will follow soon.
Thanks,
StefanChanges in v2:
- Add missing (uintptr_t) cast to remove compile time warningStefan Roese (4):
usb: xhci: Add missing endian conversions (cpu_to_leXX/leXX_to_cpu)
usb: xhci:xhci_mem_init: Usecpu_to_le64()and notxhci_writeq()
usb:usb-uclass.c: Drople16_to_cpu()as values are already swapped
usb: xhci: Addvirt_to_phys()to support mapped platforms
Quoted 6 lines
drivers/usb/host/usb-uclass.c | 8 ++++---- drivers/usb/host/xhci-mem.c | 30 +++++++++++++++--------------- drivers/usb/host/xhci-ring.c | 8 ++++---- drivers/usb/host/xhci.c | 3 +-- 4 files changed, 24 insertions(+), 25 deletions(-)
Is everything okay with this series? If yes, I think it would be good to have it included soon into mainline, so that all platforms have time to test these changes to the common xHCI driver.
Thanks,
Stefan
v2 cover usb: xhci: Prepare xHCI driver for MIPS Octeon big-endian support
Hi Marek,
Quoted 33 lines · Stefan Roese
Hi Bin,
Quoted 22 lines · Stefan Roese
These patches fix a few issues, found while porting the xHCI to the MIPS Octeon platforms. The basic issues here are:
- Endianess issues: missing
cpu_to_leXX()&leXX_to_cpu()conversions
- Use physical (DMA) address for the xHCI DMA controllerThese patches are the groundwork for the upcoming xHCI Octeon support that will follow soon.
Thanks,
StefanChanges in v2:
- Add missing (uintptr_t) cast to remove compile time warningStefan Roese (4):
usb: xhci: Add missing endian conversions (cpu_to_leXX/leXX_to_cpu)
usb: xhci:xhci_mem_init: Usecpu_to_le64()and notxhci_writeq()
usb:usb-uclass.c: Drople16_to_cpu()as values are already swapped
usb: xhci: Addvirt_to_phys()to support mapped platformsQuoted 6 lines
drivers/usb/host/usb-uclass.c | 8 ++++---- drivers/usb/host/xhci-mem.c | 30 +++++++++++++++--------------- drivers/usb/host/xhci-ring.c | 8 ++++---- drivers/usb/host/xhci.c | 3 +-- 4 files changed, 24 insertions(+), 25 deletions(-)
Quoted 3 lines
Is everything okay with this series? If yes, I think it would be good to have it included soon into mainline, so that all platforms have time to test these changes to the common xHCI driver.
Would you pick up this series? Or do you want me to pick this up via u-boot-x86 tree?
Regards,
Bin
v2 cover usb: xhci: Prepare xHCI driver for MIPS Octeon big-endian support
Hi Marek,
Quoted 36 lines · Bin Meng
Hi Marek,
Quoted 33 lines · Stefan Roese
Hi Bin,
Quoted 28 lines · Stefan Roese
These patches fix a few issues, found while porting the xHCI to the MIPS Octeon platforms. The basic issues here are:
- Endianess issues: missing
cpu_to_leXX()&leXX_to_cpu()conversions
- Use physical (DMA) address for the xHCI DMA controllerThese patches are the groundwork for the upcoming xHCI Octeon support that will follow soon.
Thanks,
StefanChanges in v2:
- Add missing (uintptr_t) cast to remove compile time warningStefan Roese (4):
usb: xhci: Add missing endian conversions (cpu_to_leXX/leXX_to_cpu)
usb: xhci:xhci_mem_init: Usecpu_to_le64()and notxhci_writeq()
usb:usb-uclass.c: Drople16_to_cpu()as values are already swapped
usb: xhci: Addvirt_to_phys()to support mapped platformsdrivers/usb/host/usb-uclass.c | 8 ++++---- drivers/usb/host/xhci-mem.c | 30 +++++++++++++++--------------- drivers/usb/host/xhci-ring.c | 8 ++++---- drivers/usb/host/xhci.c | 3 +-- 4 files changed, 24 insertions(+), 25 deletions(-)
Quoted 6 lines
Quoted 3 lines
Is everything okay with this series? If yes, I think it would be good to have it included soon into mainline, so that all platforms have time to test these changes to the common xHCI driver.
Would you pick up this series? Or do you want me to pick this up via u-boot-x86 tree?
Gently ping on this.
Thanks,
Stefan
Marek Vasut
Appliedv2 cover usb: xhci: Prepare xHCI driver for MIPS Octeon big-endian support
Quoted 41 lines · Stefan Roese
Hi Marek,
Quoted 38 lines · Bin Meng
Hi Marek,
Quoted 35 lines · Stefan Roese
Hi Bin,
Quoted 30 lines · Stefan Roese
These patches fix a few issues, found while porting the xHCI to the MIPS
Octeon platforms. The basic issues here are:- Endianess issues: missing
cpu_to_leXX()&leXX_to_cpu()conversions
- Use physical (DMA) address for the xHCI DMA controllerThese patches are the groundwork for the upcoming xHCI Octeon support that will follow soon.
Thanks,
StefanChanges in v2:
- Add missing (uintptr_t) cast to remove compile time warningStefan Roese (4):
??? usb: xhci: Add missing endian conversions (cpu_to_leXX/leXX_to_cpu)
??? usb: xhci:xhci_mem_init: Usecpu_to_le64()and notxhci_writeq()??? usb:usb-uclass.c: Drople16_to_cpu()as values are already swapped ??? usb: xhci: Addvirt_to_phys()to support mapped platforms?? drivers/usb/host/usb-uclass.c |? 8 ++++---- ?? drivers/usb/host/xhci-mem.c?? | 30 +++++++++++++++--------------- ?? drivers/usb/host/xhci-ring.c? |? 8 ++++---- ?? drivers/usb/host/xhci.c?????? |? 3 +--?? 4 files changed, 24 insertions(+), 25 deletions(-)
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
Is everything okay with this series? If yes, I think it would be good to have it included soon into mainline, so that all platforms have time to test these changes to the common xHCI driver.
Would you pick up this series? Or do you want me to pick this up via u-boot-x86 tree?
Gently ping on this.
Applied, thanks.