Skip to contentSkip to conversation

mmc: fsl_esdhc: support eMMC HS200/HS400 modes

PATCH Superseded Yangbo Lu 2 participants 20 messages Jul 23, 2020 – Aug 25, 2020

Subsystems (3)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore

Yangbo Lu

author
#0 lore raw

v3 cover mmc: fsl_esdhc: support eMMC HS200/HS400 modes

This patch-set is to support eMMC HS200 and HS400 speed modes for eSDHC, and enable them on LX2160ARDB board.

CI build link
https://travis-ci.org/github/yangbolu1991/u-boot-test/builds/710977092

Changes for v2:
- Added two patches to fix stability issue.
Changes for v3:
- Explained more in commit messages.
- Added HS400 exit code for downgrade.

Yangbo Lu (11):
mmc: add a reinit() API
mmc: fsl_esdhc: add a reinit() callback
mmc: fsl_esdhc: support tuning for eMMC HS200
mmc: fsl_esdhc: clean TBCTL[TB_EN] manually during init
mmc: add a hs400_tuning flag
mmc: add a mmc_hs400_prepare_ddr() interface
mmc: fsl_esdhc: support eMMC HS400 mode
mmc: fsl_esdhc: fix mmc->clock with actual clock
mmc: fsl_esdhc: fix eMMC HS400 stability issue
arm: dts: lx2160ardb: support eMMC HS400 mode
configs: lx2160ardb: enable eMMC HS400 mode support

 arch/arm/dts/fsl-lx2160a-rdb.dts             |   2 +
 configs/lx2160ardb_tfa_SECURE_BOOT_defconfig |   1 +
 configs/lx2160ardb_tfa_defconfig             |   1 +
 configs/lx2160ardb_tfa_stmm_defconfig        |   1 +
 drivers/mmc/fsl_esdhc.c                      | 176 ++++++++++++++++++++++++++-
 drivers/mmc/mmc-uclass.c                     |  30 +++++
 drivers/mmc/mmc.c                            |  12 +-
 include/fsl_esdhc.h                          |  29 ++++-
 include/mmc.h                                |  26 +++-
 9 files changed, 268 insertions(+), 10 deletions(-)
Signature · 1 line
2.7.4
author
#1 lore raw

PATCH v3 1/11 mmc: add a reinit() API

For DM_MMC, the controller re-initialization is needed to clear old configuration for mmc rescan.

---
Changes for v2:
- None.
Changes for v3:
- None.

---
 drivers/mmc/mmc-uclass.c | 15 +++++++++++++++
 drivers/mmc/mmc.c        |  8 ++++++--
 include/mmc.h            | 10 ++++++++++
 3 files changed, 31 insertions(+), 2 deletions(-)
drivers/mmc/mmc-uclass.c +15 -0
index c5b7872..b9f0880 100644
@@ -170,6 +170,21 @@ int mmc_deferred_probe(struct mmc *mmc)
 	return dm_mmc_deferred_probe(mmc->dev);
 }
 
+int dm_mmc_reinit(struct udevice *dev)
+{
+	struct dm_mmc_ops *ops = mmc_get_ops(dev);
+
+	if (ops->reinit)
+		return ops->reinit(dev);
+
+	return 0;
+}
+
+int mmc_reinit(struct mmc *mmc)
+{
+	return dm_mmc_reinit(mmc->dev);
+}
+
 int mmc_of_parse(struct udevice *dev, struct mmc_config *cfg)
 {
 	int val;
drivers/mmc/mmc.c +6 -2
index f36d11d..a4c6153 100644
@@ -2818,13 +2818,17 @@ int mmc_get_op_cond(struct mmc *mmc)
 		return err;
 
 #if CONFIG_IS_ENABLED(DM_MMC)
-	/* The device has already been probed ready for use */
+	/*
+	 * Re-initialization is needed to clear old configuration for
+	 * mmc rescan.
+	 */
+	err = mmc_reinit(mmc);
 #else
 	/* made sure it's not NULL earlier */
 	err = mmc->cfg->ops->init(mmc);
+#endif
 	if (err)
 		return err;
-#endif
 	mmc->ddr_mode = 0;
 
 retry:
include/mmc.h +10 -0
index 8256219..161b8bc 100644
@@ -422,6 +422,14 @@ struct dm_mmc_ops {
 	 */
 	int (*deferred_probe)(struct udevice *dev);
 	/**
+	 * reinit() - Re-initialization to clear old configuration for
+	 * mmc rescan.
+	 *
+	 * @dev:	Device to reinit
+	 * @return 0 if Ok, -ve if error
+	 */
+	int (*reinit)(struct udevice *dev);
+	/**
 	 * send_cmd() - Send a command to the MMC device
 	 *
 	 * @dev:	Device to receive the command
@@ -518,6 +526,7 @@ int dm_mmc_execute_tuning(struct udevice *dev, uint opcode);
 int dm_mmc_wait_dat0(struct udevice *dev, int state, int timeout_us);
 int dm_mmc_host_power_cycle(struct udevice *dev);
 int dm_mmc_deferred_probe(struct udevice *dev);
+int dm_mmc_reinit(struct udevice *dev);
 int dm_mmc_get_b_max(struct udevice *dev, void *dst, lbaint_t blkcnt);
 
 /* Transition functions for compatibility */
@@ -529,6 +538,7 @@ int mmc_wait_dat0(struct mmc *mmc, int state, int timeout_us);
 int mmc_set_enhanced_strobe(struct mmc *mmc);
 int mmc_host_power_cycle(struct mmc *mmc);
 int mmc_deferred_probe(struct mmc *mmc);
+int mmc_reinit(struct mmc *mmc);
 int mmc_get_b_max(struct mmc *mmc, void *dst, lbaint_t blkcnt);
 
 #else
Signature · 1 line
2.7.4
#2 lore raw

PATCH v3 1/11 mmc: add a reinit() API

Quoted 4 lines · Yangbo Lu

For DM_MMC, the controller re-initialization is needed to clear old configuration for mmc rescan.

Best Regards,
Jaehoon Chung

Quoted 97 lines

---
Changes for v2:
- None.
Changes for v3:
- None.

---
 drivers/mmc/mmc-uclass.c | 15 +++++++++++++++
 drivers/mmc/mmc.c        |  8 ++++++--
 include/mmc.h            | 10 ++++++++++
 3 files changed, 31 insertions(+), 2 deletions(-)
drivers/mmc/mmc-uclass.c +15 -0
index c5b7872..b9f0880 100644
@@ -170,6 +170,21 @@ int mmc_deferred_probe(struct mmc *mmc)
 	return dm_mmc_deferred_probe(mmc->dev);
 }
 
+int dm_mmc_reinit(struct udevice *dev)
+{
+	struct dm_mmc_ops *ops = mmc_get_ops(dev);
+
+	if (ops->reinit)
+		return ops->reinit(dev);
+
+	return 0;
+}
+
+int mmc_reinit(struct mmc *mmc)
+{
+	return dm_mmc_reinit(mmc->dev);
+}
+
 int mmc_of_parse(struct udevice *dev, struct mmc_config *cfg)
 {
 	int val;
drivers/mmc/mmc.c +6 -2
index f36d11d..a4c6153 100644
@@ -2818,13 +2818,17 @@ int mmc_get_op_cond(struct mmc *mmc)
 		return err;
 
 #if CONFIG_IS_ENABLED(DM_MMC)
-	/* The device has already been probed ready for use */
+	/*
+	 * Re-initialization is needed to clear old configuration for
+	 * mmc rescan.
+	 */
+	err = mmc_reinit(mmc);
 #else
 	/* made sure it's not NULL earlier */
 	err = mmc->cfg->ops->init(mmc);
+#endif
 	if (err)
 		return err;
-#endif
 	mmc->ddr_mode = 0;
 
 retry:
include/mmc.h +10 -0
index 8256219..161b8bc 100644
@@ -422,6 +422,14 @@ struct dm_mmc_ops {
 	 */
 	int (*deferred_probe)(struct udevice *dev);
 	/**
+	 * reinit() - Re-initialization to clear old configuration for
+	 * mmc rescan.
+	 *
+	 * @dev:	Device to reinit
+	 * @return 0 if Ok, -ve if error
+	 */
+	int (*reinit)(struct udevice *dev);
+	/**
 	 * send_cmd() - Send a command to the MMC device
 	 *
 	 * @dev:	Device to receive the command
@@ -518,6 +526,7 @@ int dm_mmc_execute_tuning(struct udevice *dev, uint opcode);
 int dm_mmc_wait_dat0(struct udevice *dev, int state, int timeout_us);
 int dm_mmc_host_power_cycle(struct udevice *dev);
 int dm_mmc_deferred_probe(struct udevice *dev);
+int dm_mmc_reinit(struct udevice *dev);
 int dm_mmc_get_b_max(struct udevice *dev, void *dst, lbaint_t blkcnt);
 
 /* Transition functions for compatibility */
@@ -529,6 +538,7 @@ int mmc_wait_dat0(struct mmc *mmc, int state, int timeout_us);
 int mmc_set_enhanced_strobe(struct mmc *mmc);
 int mmc_host_power_cycle(struct mmc *mmc);
 int mmc_deferred_probe(struct mmc *mmc);
+int mmc_reinit(struct mmc *mmc);
 int mmc_get_b_max(struct mmc *mmc, void *dst, lbaint_t blkcnt);
 
 #else
author
#3 lore raw

PATCH v3 2/11 mmc: fsl_esdhc: add a reinit() callback

In reply to Yangbo Lu

Add a reinit() callback for mmc rescan.

---
Changes for v2:
- None.
Changes for v3:
- None.

---
 drivers/mmc/fsl_esdhc.c | 9 +++++++++
 1 file changed, 9 insertions(+)
drivers/mmc/fsl_esdhc.c +9 -0
index f6e0d43..4fff7b5 100644
@@ -946,6 +946,14 @@ static int fsl_esdhc_set_ios(struct udevice *dev)
 	return esdhc_set_ios_common(priv, &plat->mmc);
 }
 
+static int fsl_esdhc_reinit(struct udevice *dev)
+{
+	struct fsl_esdhc_plat *plat = dev_get_platdata(dev);
+	struct fsl_esdhc_priv *priv = dev_get_priv(dev);
+
+	return esdhc_init_common(priv, &plat->mmc);
+}
+
 static const struct dm_mmc_ops fsl_esdhc_ops = {
 	.get_cd		= fsl_esdhc_get_cd,
 	.send_cmd	= fsl_esdhc_send_cmd,
@@ -953,6 +961,7 @@ static const struct dm_mmc_ops fsl_esdhc_ops = {
 #ifdef MMC_SUPPORTS_TUNING
 	.execute_tuning = fsl_esdhc_execute_tuning,
 #endif
+	.reinit = fsl_esdhc_reinit,
 };
 
 static const struct udevice_id fsl_esdhc_ids[] = {
Signature · 1 line
2.7.4
#4 lore raw

PATCH v3 2/11 mmc: fsl_esdhc: add a reinit() callback

Quoted 3 lines · Yangbo Lu

Add a reinit() callback for mmc rescan.

Best Regards,
Jaehoon Chung

Quoted 37 lines

---
Changes for v2:
- None.
Changes for v3:
- None.

---
 drivers/mmc/fsl_esdhc.c | 9 +++++++++
 1 file changed, 9 insertions(+)
drivers/mmc/fsl_esdhc.c +9 -0
index f6e0d43..4fff7b5 100644
@@ -946,6 +946,14 @@ static int fsl_esdhc_set_ios(struct udevice *dev)
 	return esdhc_set_ios_common(priv, &plat->mmc);
 }
 
+static int fsl_esdhc_reinit(struct udevice *dev)
+{
+	struct fsl_esdhc_plat *plat = dev_get_platdata(dev);
+	struct fsl_esdhc_priv *priv = dev_get_priv(dev);
+
+	return esdhc_init_common(priv, &plat->mmc);
+}
+
 static const struct dm_mmc_ops fsl_esdhc_ops = {
 	.get_cd		= fsl_esdhc_get_cd,
 	.send_cmd	= fsl_esdhc_send_cmd,
@@ -953,6 +961,7 @@ static const struct dm_mmc_ops fsl_esdhc_ops = {
 #ifdef MMC_SUPPORTS_TUNING
 	.execute_tuning = fsl_esdhc_execute_tuning,
 #endif
+	.reinit = fsl_esdhc_reinit,
 };
 
 static const struct udevice_id fsl_esdhc_ids[] = {
author
#5 lore raw

PATCH v3 3/11 mmc: fsl_esdhc: support tuning for eMMC HS200

In reply to Yangbo Lu

Support tuning process for eMMC HS200 for eSDHC.

---
Changes for v2:
- None.
Changes for v3:
- Rebased.

---
 drivers/mmc/fsl_esdhc.c | 106 ++++++++++++++++++++++++++++++++++++++++++++++--
 include/fsl_esdhc.h     |  17 ++++++--
 2 files changed, 116 insertions(+), 7 deletions(-)
drivers/mmc/fsl_esdhc.c +103 -3
index 4fff7b5..fc9d0c9 100644
@@ -60,7 +60,9 @@ struct fsl_esdhc {
 	uint    dmaerrattr;	/* DMA error attribute register */
 	char    reserved5[4];	/* reserved */
 	uint    hostcapblt2;	/* Host controller capabilities register 2 */
-	char    reserved6[756];	/* reserved */
+	char	reserved6[8];	/* reserved */
+	uint	tbctl;		/* Tuning block control register */
+	char    reserved7[744];	/* reserved */
 	uint    esdhcctl;	/* eSDHC control register */
 };
 
@@ -101,7 +103,9 @@ static uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data)
 	if (data) {
 		xfertyp |= XFERTYP_DPSEL;
 #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
-		xfertyp |= XFERTYP_DMAEN;
+		if (cmd->cmdidx != MMC_CMD_SEND_TUNING_BLOCK &&
+		    cmd->cmdidx != MMC_CMD_SEND_TUNING_BLOCK_HS200)
+			xfertyp |= XFERTYP_DMAEN;
 #endif
 		if (data->blocks > 1) {
 			xfertyp |= XFERTYP_MSBSEL;
@@ -380,6 +384,10 @@ static int esdhc_send_cmd_common(struct fsl_esdhc_priv *priv, struct mmc *mmc,
 	esdhc_write32(&regs->cmdarg, cmd->cmdarg);
 	esdhc_write32(&regs->xfertyp, xfertyp);
 
+	if (cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK ||
+	    cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200)
+		flags = IRQSTAT_BRR;
+
 	/* Wait for the command to complete */
 	start = get_timer(0);
 	while (!(esdhc_read32(&regs->irqstat) & flags)) {
@@ -439,6 +447,11 @@ static int esdhc_send_cmd_common(struct fsl_esdhc_priv *priv, struct mmc *mmc,
 #ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO
 		esdhc_pio_read_write(priv, data);
 #else
+		flags = DATA_COMPLETE;
+		if (cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK ||
+		    cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200)
+			flags = IRQSTAT_BRR;
+
 		do {
 			irqstat = esdhc_read32(&regs->irqstat);
 
@@ -451,7 +464,7 @@ static int esdhc_send_cmd_common(struct fsl_esdhc_priv *priv, struct mmc *mmc,
 				err = -ECOMM;
 				goto out;
 			}
-		} while ((irqstat & DATA_COMPLETE) != DATA_COMPLETE);
+		} while ((irqstat & flags) != flags);
 
 		/*
 		 * Need invalidate the dcache here again to avoid any
@@ -555,6 +568,19 @@ static void esdhc_clock_control(struct fsl_esdhc_priv *priv, bool enable)
 	}
 }
 
+static void esdhc_set_timing(struct fsl_esdhc_priv *priv, enum bus_mode mode)
+{
+	struct fsl_esdhc *regs = priv->esdhc_regs;
+
+	esdhc_clock_control(priv, false);
+
+	if (mode == MMC_HS_200)
+		esdhc_clrsetbits32(&regs->autoc12err, UHSM_MASK,
+				   UHSM_SDR104_HS200);
+
+	esdhc_clock_control(priv, true);
+}
+
 static int esdhc_set_ios_common(struct fsl_esdhc_priv *priv, struct mmc *mmc)
 {
 	struct fsl_esdhc *regs = priv->esdhc_regs;
@@ -570,6 +596,9 @@ static int esdhc_set_ios_common(struct fsl_esdhc_priv *priv, struct mmc *mmc)
 	if (priv->clock != mmc->clock)
 		set_sysctl(priv, mmc, mmc->clock);
 
+	/* Set timing */
+	esdhc_set_timing(priv, mmc->selected_mode);
+
 	/* Set the bus width */
 	esdhc_clrbits32(&regs->proctl, PROCTL_DTW_4 | PROCTL_DTW_8);
 
@@ -954,6 +983,77 @@ static int fsl_esdhc_reinit(struct udevice *dev)
 	return esdhc_init_common(priv, &plat->mmc);
 }
 
+#ifdef MMC_SUPPORTS_TUNING
+static void esdhc_flush_async_fifo(struct fsl_esdhc_priv *priv)
+{
+	struct fsl_esdhc *regs = priv->esdhc_regs;
+	u32 time_out;
+
+	esdhc_setbits32(&regs->esdhcctl, ESDHCCTL_FAF);
+
+	time_out = 20;
+	while (esdhc_read32(&regs->esdhcctl) & ESDHCCTL_FAF) {
+		if (time_out == 0) {
+			printf("fsl_esdhc: Flush asynchronous FIFO timeout.\n");
+			break;
+		}
+		time_out--;
+		mdelay(1);
+	}
+}
+
+static void esdhc_tuning_block_enable(struct fsl_esdhc_priv *priv,
+				      bool en)
+{
+	struct fsl_esdhc *regs = priv->esdhc_regs;
+
+	esdhc_clock_control(priv, false);
+	esdhc_flush_async_fifo(priv);
+	if (en)
+		esdhc_setbits32(&regs->tbctl, TBCTL_TB_EN);
+	else
+		esdhc_clrbits32(&regs->tbctl, TBCTL_TB_EN);
+	esdhc_clock_control(priv, true);
+}
+
+static int fsl_esdhc_execute_tuning(struct udevice *dev, uint32_t opcode)
+{
+	struct fsl_esdhc_plat *plat = dev_get_platdata(dev);
+	struct fsl_esdhc_priv *priv = dev_get_priv(dev);
+	struct fsl_esdhc *regs = priv->esdhc_regs;
+	u32 val, irqstaten;
+	int i;
+
+	esdhc_tuning_block_enable(priv, true);
+	esdhc_setbits32(&regs->autoc12err, EXECUTE_TUNING);
+
+	irqstaten = esdhc_read32(&regs->irqstaten);
+	esdhc_write32(&regs->irqstaten, IRQSTATEN_BRR);
+
+	for (i = 0; i < MAX_TUNING_LOOP; i++) {
+		mmc_send_tuning(&plat->mmc, opcode, NULL);
+		mdelay(1);
+
+		val = esdhc_read32(&regs->autoc12err);
+		if (!(val & EXECUTE_TUNING)) {
+			if (val & SMPCLKSEL)
+				break;
+		}
+	}
+
+	esdhc_write32(&regs->irqstaten, irqstaten);
+
+	if (i != MAX_TUNING_LOOP)
+		return 0;
+
+	printf("fsl_esdhc: tuning failed!\n");
+	esdhc_clrbits32(&regs->autoc12err, SMPCLKSEL);
+	esdhc_clrbits32(&regs->autoc12err, EXECUTE_TUNING);
+	esdhc_tuning_block_enable(priv, false);
+	return -ETIMEDOUT;
+}
+#endif
+
 static const struct dm_mmc_ops fsl_esdhc_ops = {
 	.get_cd		= fsl_esdhc_get_cd,
 	.send_cmd	= fsl_esdhc_send_cmd,
include/fsl_esdhc.h +13 -4
index 2615d1a..aaa5941 100644
@@ -78,8 +78,10 @@
 #define IRQSTATEN_TC		(0x00000002)
 #define IRQSTATEN_CC		(0x00000001)
 
+/* eSDHC control register */
 #define ESDHCCTL		0x0002e40c
 #define ESDHCCTL_PCS		(0x00080000)
+#define ESDHCCTL_FAF		(0x00040000)
 
 #define PRSSTAT			0x0002e024
 #define PRSSTAT_DAT0		(0x01000000)
@@ -158,6 +160,12 @@
 #define BLKATTR_SIZE(x)	(x & 0x1fff)
 #define MAX_BLK_CNT	0x7fff	/* so malloc will have enough room with 32M */
 
+/* Auto CMD error status register / system control 2 register */
+#define EXECUTE_TUNING		0x00400000
+#define SMPCLKSEL		0x00800000
+#define UHSM_MASK		0x00070000
+#define UHSM_SDR104_HS200	0x00030000
+
 /* Host controller capabilities register */
 #define HOSTCAPBLT_VS18		0x04000000
 #define HOSTCAPBLT_VS30		0x02000000
@@ -166,6 +174,11 @@
 #define HOSTCAPBLT_DMAS		0x00400000
 #define HOSTCAPBLT_HSS		0x00200000
 
+/* Tuning block control register */
+#define TBCTL_TB_EN		0x00000004
+
+#define MAX_TUNING_LOOP		40
+
 struct fsl_esdhc_cfg {
 	phys_addr_t esdhc_base;
 	u32	sdhc_clk;
@@ -207,10 +220,6 @@ struct fsl_esdhc_cfg {
 int fsl_esdhc_mmc_init(struct bd_info *bis);
 int fsl_esdhc_initialize(struct bd_info *bis, struct fsl_esdhc_cfg *cfg);
 void fdt_fixup_esdhc(void *blob, struct bd_info *bd);
-#ifdef MMC_SUPPORTS_TUNING
-static inline int fsl_esdhc_execute_tuning(struct udevice *dev,
-					   uint32_t opcode) {return 0; }
-#endif
 #else
 static inline int fsl_esdhc_mmc_init(struct bd_info *bis) { return -ENOSYS; }
 static inline void fdt_fixup_esdhc(void *blob, struct bd_info *bd) {}
Signature · 1 line
2.7.4
author
#6 lore raw

PATCH v3 4/11 mmc: fsl_esdhc: clean TBCTL[TB_EN] manually during init

In reply to Yangbo Lu

Clean TBCTL[TB_EN] manually during init since it is not able to be reset by reset all operation.

---
Changes for v2:
- None.
Changes for v3:
- None.

---
 drivers/mmc/fsl_esdhc.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/mmc/fsl_esdhc.c +3 -0
index fc9d0c9..c52ab0f 100644
@@ -637,6 +637,9 @@ static int esdhc_init_common(struct fsl_esdhc_priv *priv, struct mmc *mmc)
 			return -ETIMEDOUT;
 	}
 
+	/* Clean TBCTL[TB_EN] which is not able to be reset by reset all */
+	esdhc_clrbits32(&regs->tbctl, TBCTL_TB_EN);
+
 	esdhc_enable_cache_snooping(regs);
 
 	esdhc_setbits32(&regs->sysctl, SYSCTL_HCKEN | SYSCTL_IPGEN);
Signature · 1 line
2.7.4
author
#7 lore raw

PATCH v3 5/11 mmc: add a hs400_tuning flag

In reply to Yangbo Lu

Some controllers may have difference between HS200 tuning and HS400 tuning, such as different registers setting, different procedure, or different errata.

This patch is to add a hs400_tuning flag to identify the tuning for HS400 mode.

---
Changes for v2:
- None.
Changes for v3:
- Explained more in commit messages.

---
 drivers/mmc/mmc.c | 2 ++
 include/mmc.h     | 1 +
 2 files changed, 3 insertions(+)
drivers/mmc/mmc.c +2 -0
index a4c6153..f020a8e 100644
@@ -1981,7 +1981,9 @@ static int mmc_select_hs400(struct mmc *mmc)
 	mmc_set_clock(mmc, mmc->tran_speed, false);
 
 	/* execute tuning if needed */
+	mmc->hs400_tuning = 1;
 	err = mmc_execute_tuning(mmc, MMC_CMD_SEND_TUNING_BLOCK_HS200);
+	mmc->hs400_tuning = 0;
 	if (err) {
 		debug("tuning failed\n");
 		return err;
include/mmc.h +1 -0
index 161b8bc..2399cc2 100644
@@ -707,6 +707,7 @@ struct mmc {
 				  * accessing the boot partitions
 				  */
 	u32 quirks;
+	u8 hs400_tuning;
 };
 
 struct mmc_hwpart_conf {
Signature · 1 line
2.7.4
#8 lore raw

PATCH v3 5/11 mmc: add a hs400_tuning flag

Quoted 23 lines · Yangbo Lu

Some controllers may have difference between HS200 tuning and HS400 tuning, such as different registers setting, different procedure, or different errata.

This patch is to add a hs400_tuning flag to identify the tuning for HS400 mode.

---
Changes for v2:
- None.
Changes for v3:
- Explained more in commit messages.

---
 drivers/mmc/mmc.c | 2 ++
 include/mmc.h     | 1 +
 2 files changed, 3 insertions(+)
drivers/mmc/mmc.c +0 -0
index a4c6153..f020a8e 100644

drivers/mmc/mmc.c static int mmc_select_hs400(struct mmc *mmc) · line 1986

Quoted 6 lines
drivers/mmc/mmc.c +2 -0
@@ -1981,7 +1981,9 @@ static int mmc_select_hs400(struct mmc *mmc)
 	mmc_set_clock(mmc, mmc->tran_speed, false);
 
 	/* execute tuning if needed */
+	mmc->hs400_tuning = 1;
 	err = mmc_execute_tuning(mmc, MMC_CMD_SEND_TUNING_BLOCK_HS200);
+	mmc->hs400_tuning = 0;

It seems that it's fsl_esdhc specific flag. Is it need to set to 0?

Best Regards,
Jaehoon Chung

Quoted 16 lines
drivers/mmc/mmc.c +0 -0
 	if (err) {
 		debug("tuning failed\n");
 		return err;
include/mmc.h +1 -0
index 161b8bc..2399cc2 100644
@@ -707,6 +707,7 @@ struct mmc {
 				  * accessing the boot partitions
 				  */
 	u32 quirks;
+	u8 hs400_tuning;
 };
 
 struct mmc_hwpart_conf {
author
#9 lore raw

PATCH v3 5/11 mmc: add a hs400_tuning flag

Hi Jaehoon,

Quoted 33 lines

-----Original Message-----
From: Jaehoon Chung <[email protected]>
Sent: Tuesday, August 25, 2020 6:54 AM
To: Y.b. Lu <[email protected]>; u-boot at lists.denx.de; Peng Fan <[email protected]>; Priyanka Jain <[email protected]>
Subject: Re: [v3, 05/11] mmc: add a hs400_tuning flag

Quoted 25 lines · Yangbo Lu

Some controllers may have difference between HS200 tuning and HS400 tuning, such as different registers setting, different procedure, or different errata.

This patch is to add a hs400_tuning flag to identify the tuning for HS400 mode.

---
Changes for v2:
- None.
Changes for v3:
- Explained more in commit messages.

---
 drivers/mmc/mmc.c | 2 ++
 include/mmc.h     | 1 +
 2 files changed, 3 insertions(+)
drivers/mmc/mmc.c +0 -0
index a4c6153..f020a8e 100644
@@ -1981,7 +1981,9 @@ static int mmc_select_hs400(struct mmc *mmc)
 	mmc_set_clock(mmc, mmc->tran_speed, false);
 
Quoted 7 lines

drivers/mmc/mmc.c static int mmc_select_hs400(struct mmc *mmc)

Quoted 3 lines
drivers/mmc/mmc.c +1 -0
 	/* execute tuning if needed */
+	mmc->hs400_tuning = 1;
 	err = mmc_execute_tuning(mmc,

MMC_CMD_SEND_TUNING_BLOCK_HS200);

drivers/mmc/mmc.c static int mmc_select_hs400(struct mmc *mmc) · line 1986

Quoted 1 line
drivers/mmc/mmc.c +1 -0
+	mmc->hs400_tuning = 0;

It seems that it's fsl_esdhc specific flag. Is it need to set to 0?

From mmc driver, both HS200 and HS400 tuning are through mmc_execute_tuning(mmc, MMC_CMD_SEND_TUNING_BLOCK_HS200).
But as I commented in commit message,
"Some controllers may have difference between HS200 tuning
and HS400 tuning, such as different registers setting,
different procedure, or different errata."
So we could use such flag to indicate the tuning in progress is for HS400. Set it before tuning and clean after tuning.
By now, only fsl_esdhc is using it. I can't predict whether there will be other controllers use it, but at least we need a method to identify HS400 tuning to support eSDHC HS400 currently. There are also errata for eSDHC HS400 tuning. I will send patches in the future.
Thanks.

Quoted 20 lines

Best Regards,
Jaehoon Chung

Quoted 16 lines
drivers/mmc/mmc.c +0 -0
 	if (err) {
 		debug("tuning failed\n");
 		return err;
include/mmc.h +1 -0
index 161b8bc..2399cc2 100644
@@ -707,6 +707,7 @@ struct mmc {
 				  * accessing the boot partitions
 				  */
 	u32 quirks;
+	u8 hs400_tuning;
 };
 
 struct mmc_hwpart_conf {
author
#10 lore raw

PATCH v3 6/11 mmc: add a mmc_hs400_prepare_ddr() interface

In reply to Yangbo Lu

Add a mmc_hs400_prepare_ddr() interface for controllers which needs preparation before switching to DDR mode for HS400 mode.

---
Changes for v2:
- None.
Changes for v3:
- None.

---
 drivers/mmc/mmc-uclass.c | 15 +++++++++++++++
 drivers/mmc/mmc.c        |  2 ++
 include/mmc.h            | 15 ++++++++++++++-
 3 files changed, 31 insertions(+), 1 deletion(-)
drivers/mmc/mmc-uclass.c +15 -0
index b9f0880..240b205 100644
@@ -141,6 +141,21 @@ int mmc_set_enhanced_strobe(struct mmc *mmc)
 }
 #endif
 
+int dm_mmc_hs400_prepare_ddr(struct udevice *dev)
+{
+	struct dm_mmc_ops *ops = mmc_get_ops(dev);
+
+	if (ops->hs400_prepare_ddr)
+		return ops->hs400_prepare_ddr(dev);
+
+	return 0;
+}
+
+int mmc_hs400_prepare_ddr(struct mmc *mmc)
+{
+	return dm_mmc_hs400_prepare_ddr(mmc->dev);
+}
+
 int dm_mmc_host_power_cycle(struct udevice *dev)
 {
 	struct dm_mmc_ops *ops = mmc_get_ops(dev);
drivers/mmc/mmc.c +2 -0
index f020a8e..935fa72 100644
@@ -1992,6 +1992,8 @@ static int mmc_select_hs400(struct mmc *mmc)
 	/* Set back to HS */
 	mmc_set_card_speed(mmc, MMC_HS, true);
 
+	mmc_hs400_prepare_ddr(mmc);
+
 	err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH,
 			 EXT_CSD_BUS_WIDTH_8 | EXT_CSD_DDR_FLAG);
 	if (err)
include/mmc.h +14 -1
index 2399cc2..659df75 100644
@@ -513,6 +513,14 @@ struct dm_mmc_ops {
 	 * @return maximum number of blocks for this transfer
 	 */
 	int (*get_b_max)(struct udevice *dev, void *dst, lbaint_t blkcnt);
+
+	/**
+	 * hs400_prepare_ddr - prepare to switch to DDR mode
+	 *
+	 * @dev:	Device to check
+	 * @return 0 if success, -ve on error
+	 */
+	int (*hs400_prepare_ddr)(struct udevice *dev);
 };
 
 #define mmc_get_ops(dev)        ((struct dm_mmc_ops *)(dev)->driver->ops)
@@ -540,7 +548,7 @@ int mmc_host_power_cycle(struct mmc *mmc);
 int mmc_deferred_probe(struct mmc *mmc);
 int mmc_reinit(struct mmc *mmc);
 int mmc_get_b_max(struct mmc *mmc, void *dst, lbaint_t blkcnt);
-
+int mmc_hs400_prepare_ddr(struct mmc *mmc);
 #else
 struct mmc_ops {
 	int (*send_cmd)(struct mmc *mmc,
@@ -552,6 +560,11 @@ struct mmc_ops {
 	int (*host_power_cycle)(struct mmc *mmc);
 	int (*get_b_max)(struct mmc *mmc, void *dst, lbaint_t blkcnt);
 };
+
+static inline int mmc_hs400_prepare_ddr(struct mmc *mmc)
+{
+	return 0;
+}
 #endif
 
 struct mmc_config {
Signature · 1 line
2.7.4
#11 lore raw

PATCH v3 6/11 mmc: add a mmc_hs400_prepare_ddr() interface

Quoted 47 lines · Yangbo Lu

Add a mmc_hs400_prepare_ddr() interface for controllers which needs preparation before switching to DDR mode for HS400 mode.

---
Changes for v2:
- None.
Changes for v3:
- None.

---
 drivers/mmc/mmc-uclass.c | 15 +++++++++++++++
 drivers/mmc/mmc.c        |  2 ++
 include/mmc.h            | 15 ++++++++++++++-
 3 files changed, 31 insertions(+), 1 deletion(-)
drivers/mmc/mmc-uclass.c +15 -0
index b9f0880..240b205 100644
@@ -141,6 +141,21 @@ int mmc_set_enhanced_strobe(struct mmc *mmc)
 }
 #endif
 
+int dm_mmc_hs400_prepare_ddr(struct udevice *dev)
+{
+	struct dm_mmc_ops *ops = mmc_get_ops(dev);
+
+	if (ops->hs400_prepare_ddr)
+		return ops->hs400_prepare_ddr(dev);
+
+	return 0;
+}
+
+int mmc_hs400_prepare_ddr(struct mmc *mmc)
+{
+	return dm_mmc_hs400_prepare_ddr(mmc->dev);
+}
+
 int dm_mmc_host_power_cycle(struct udevice *dev)
 {
 	struct dm_mmc_ops *ops = mmc_get_ops(dev);
drivers/mmc/mmc.c +0 -0
index f020a8e..935fa72 100644

drivers/mmc/mmc.c static int mmc_select_hs400(struct mmc *mmc) · line 1995

Quoted 4 lines
drivers/mmc/mmc.c +1 -0
@@ -1992,6 +1992,8 @@ static int mmc_select_hs400(struct mmc *mmc)
 	/* Set back to HS */
 	mmc_set_card_speed(mmc, MMC_HS, true);
 
+	mmc_hs400_prepare_ddr(mmc);

not need to get the return value? you have defined mmc_hs400_prepare_ddr() as int return type.

Best Regards,
Jaehoon Chung

Quoted 45 lines
drivers/mmc/mmc.c +1 -0
+
 	err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH,
 			 EXT_CSD_BUS_WIDTH_8 | EXT_CSD_DDR_FLAG);
 	if (err)
include/mmc.h +14 -1
index 2399cc2..659df75 100644
@@ -513,6 +513,14 @@ struct dm_mmc_ops {
 	 * @return maximum number of blocks for this transfer
 	 */
 	int (*get_b_max)(struct udevice *dev, void *dst, lbaint_t blkcnt);
+
+	/**
+	 * hs400_prepare_ddr - prepare to switch to DDR mode
+	 *
+	 * @dev:	Device to check
+	 * @return 0 if success, -ve on error
+	 */
+	int (*hs400_prepare_ddr)(struct udevice *dev);
 };
 
 #define mmc_get_ops(dev)        ((struct dm_mmc_ops *)(dev)->driver->ops)
@@ -540,7 +548,7 @@ int mmc_host_power_cycle(struct mmc *mmc);
 int mmc_deferred_probe(struct mmc *mmc);
 int mmc_reinit(struct mmc *mmc);
 int mmc_get_b_max(struct mmc *mmc, void *dst, lbaint_t blkcnt);
-
+int mmc_hs400_prepare_ddr(struct mmc *mmc);
 #else
 struct mmc_ops {
 	int (*send_cmd)(struct mmc *mmc,
@@ -552,6 +560,11 @@ struct mmc_ops {
 	int (*host_power_cycle)(struct mmc *mmc);
 	int (*get_b_max)(struct mmc *mmc, void *dst, lbaint_t blkcnt);
 };
+
+static inline int mmc_hs400_prepare_ddr(struct mmc *mmc)
+{
+	return 0;
+}
 #endif
 
 struct mmc_config {
author
#12 lore raw

PATCH v3 6/11 mmc: add a mmc_hs400_prepare_ddr() interface

Hi Jaehoon,

Quoted 58 lines

-----Original Message-----
From: Jaehoon Chung <[email protected]>
Sent: Tuesday, August 25, 2020 6:54 AM
To: Y.b. Lu <[email protected]>; u-boot at lists.denx.de; Peng Fan <[email protected]>; Priyanka Jain <[email protected]>
Subject: Re: [v3, 06/11] mmc: add a mmc_hs400_prepare_ddr() interface

Quoted 50 lines · Yangbo Lu

Add a mmc_hs400_prepare_ddr() interface for controllers which needs preparation before switching to DDR mode for HS400 mode.

---
Changes for v2:
- None.
Changes for v3:
- None.

---
 drivers/mmc/mmc-uclass.c | 15 +++++++++++++++
 drivers/mmc/mmc.c        |  2 ++
 include/mmc.h            | 15 ++++++++++++++-
 3 files changed, 31 insertions(+), 1 deletion(-)
drivers/mmc/mmc-uclass.c +15 -0
index b9f0880..240b205 100644
@@ -141,6 +141,21 @@ int mmc_set_enhanced_strobe(struct mmc *mmc)
 }
 #endif
 
+int dm_mmc_hs400_prepare_ddr(struct udevice *dev)
+{
+	struct dm_mmc_ops *ops = mmc_get_ops(dev);
+
+	if (ops->hs400_prepare_ddr)
+		return ops->hs400_prepare_ddr(dev);
+
+	return 0;
+}
+
+int mmc_hs400_prepare_ddr(struct mmc *mmc)
+{
+	return dm_mmc_hs400_prepare_ddr(mmc->dev);
+}
+
 int dm_mmc_host_power_cycle(struct udevice *dev)
 {
 	struct dm_mmc_ops *ops = mmc_get_ops(dev);
drivers/mmc/mmc.c +0 -0
index f020a8e..935fa72 100644
@@ -1992,6 +1992,8 @@ static int mmc_select_hs400(struct mmc *mmc)
 	/* Set back to HS */
 	mmc_set_card_speed(mmc, MMC_HS, true);
 
Quoted 4 lines

drivers/mmc/mmc.c static int mmc_select_hs400(struct mmc *mmc) · line 1995

Quoted 1 line
drivers/mmc/mmc.c +1 -0
+	mmc_hs400_prepare_ddr(mmc);

not need to get the return value? you have defined mmc_hs400_prepare_ddr() as int return type.

I will add returning checking.
Thanks!

Quoted 51 lines

Best Regards,
Jaehoon Chung

drivers/mmc/mmc.c static int mmc_select_hs400(struct mmc *mmc) · line 1997

Quoted 2 lines
drivers/mmc/mmc.c +1 -0
+
 	err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,

EXT_CSD_BUS_WIDTH,

Quoted 11 lines
drivers/mmc/mmc.c +0 -0
 			 EXT_CSD_BUS_WIDTH_8 | EXT_CSD_DDR_FLAG);
 	if (err)
include/mmc.h +1 -0
index 2399cc2..659df75 100644
@@ -513,6 +513,14 @@ struct dm_mmc_ops {
 	 * @return maximum number of blocks for this transfer
 	 */
 	int (*get_b_max)(struct udevice *dev, void *dst, lbaint_t blkcnt);
+

include/mmc.h struct dm_mmc_ops { · line 526

Quoted 10 lines
include/mmc.h +7 -0
+	/**
+	 * hs400_prepare_ddr - prepare to switch to DDR mode
+	 *
+	 * @dev:	Device to check
+	 * @return 0 if success, -ve on error
+	 */
+	int (*hs400_prepare_ddr)(struct udevice *dev);
 };
 
 #define mmc_get_ops(dev)        ((struct dm_mmc_ops

*)(dev)->driver->ops)

Quoted 22 lines
include/mmc.h +6 -1
@@ -540,7 +548,7 @@ int mmc_host_power_cycle(struct mmc *mmc);
 int mmc_deferred_probe(struct mmc *mmc);
 int mmc_reinit(struct mmc *mmc);
 int mmc_get_b_max(struct mmc *mmc, void *dst, lbaint_t blkcnt);
-
+int mmc_hs400_prepare_ddr(struct mmc *mmc);
 #else
 struct mmc_ops {
 	int (*send_cmd)(struct mmc *mmc,
@@ -552,6 +560,11 @@ struct mmc_ops {
 	int (*host_power_cycle)(struct mmc *mmc);
 	int (*get_b_max)(struct mmc *mmc, void *dst, lbaint_t blkcnt);
 };
+
+static inline int mmc_hs400_prepare_ddr(struct mmc *mmc)
+{
+	return 0;
+}
 #endif
 
 struct mmc_config {
author
#13 lore raw

PATCH v3 7/11 mmc: fsl_esdhc: support eMMC HS400 mode

In reply to Yangbo Lu

The process for eMMC HS400 mode for eSDHC is,

1. Perform the Tuning Process at the HS400 target operating frequency. Latched the clock division value.
2. if read transaction, then set the SDTIMNGCTL[FLW_CTL_BG].
3. Switch to High Speed mode and then set the card clock frequency to a value not greater than 52Mhz
4. Clear TBCTL[TB_EN],tuning block enable bit.
5. Change to 8 bit DDR Mode
6. Switch the card to HS400 mode.
7. Set TBCTL[TB_EN], tuning block enable bit.
8. Clear SYSCTL[SDCLKEN]
9. Wait for PRSSTAT[SDSTB] to be set
10. Change the clock division to latched value.Set TBCTL[HS 400 mode] and Set SDCLKCTL[CMD_CLK_CTRL]
11. Set SYSCTL[SDCLKEN]
12. Wait for PRSSTAT[SDSTB] to be set
13. Set DLLCFG0[DLL_ENABLE] and DLLCFG0[DLL_FREQ_SEL].
14. Wait for delay chain to lock.
15. Set TBCTL[HS400_WNDW_ADJUST]
16. Again clear SYSCTL[SDCLKEN]
17. Wait for PRSSTAT[SDSTB] to be set
18. Set ESDHCCTL[FAF]
19. Wait for ESDHCCTL[FAF] to be cleared
20. Set SYSCTL[SDCLKEN]
21. Wait for PRSSTAT[SDSTB] to be set.

---
Changes for v2:
- None.
Changes for v3:
- Added HS400 exit code for downgrade.

---
 drivers/mmc/fsl_esdhc.c | 120 ++++++++++++++++++++++++++++++++++--------------
 include/fsl_esdhc.h     |  12 +++++
 2 files changed, 98 insertions(+), 34 deletions(-)
drivers/mmc/fsl_esdhc.c +86 -34
index c52ab0f..f2ab75c 100644
@@ -62,7 +62,12 @@ struct fsl_esdhc {
 	uint    hostcapblt2;	/* Host controller capabilities register 2 */
 	char	reserved6[8];	/* reserved */
 	uint	tbctl;		/* Tuning block control register */
-	char    reserved7[744];	/* reserved */
+	char    reserved7[32];	/* reserved */
+	uint	sdclkctl;	/* SD clock control register */
+	uint	sdtimingctl;	/* SD timing control register */
+	char    reserved8[20];	/* reserved */
+	uint	dllcfg0;	/* DLL config 0 register */
+	char    reserved9[680];	/* reserved */
 	uint    esdhcctl;	/* eSDHC control register */
 };
 
@@ -568,16 +573,80 @@ static void esdhc_clock_control(struct fsl_esdhc_priv *priv, bool enable)
 	}
 }
 
+static void esdhc_flush_async_fifo(struct fsl_esdhc_priv *priv)
+{
+	struct fsl_esdhc *regs = priv->esdhc_regs;
+	u32 time_out;
+
+	esdhc_setbits32(&regs->esdhcctl, ESDHCCTL_FAF);
+
+	time_out = 20;
+	while (esdhc_read32(&regs->esdhcctl) & ESDHCCTL_FAF) {
+		if (time_out == 0) {
+			printf("fsl_esdhc: Flush asynchronous FIFO timeout.\n");
+			break;
+		}
+		time_out--;
+		mdelay(1);
+	}
+}
+
+static void esdhc_tuning_block_enable(struct fsl_esdhc_priv *priv,
+				      bool en)
+{
+	struct fsl_esdhc *regs = priv->esdhc_regs;
+
+	esdhc_clock_control(priv, false);
+	esdhc_flush_async_fifo(priv);
+	if (en)
+		esdhc_setbits32(&regs->tbctl, TBCTL_TB_EN);
+	else
+		esdhc_clrbits32(&regs->tbctl, TBCTL_TB_EN);
+	esdhc_clock_control(priv, true);
+}
+
+static void esdhc_exit_hs400(struct fsl_esdhc_priv *priv)
+{
+	struct fsl_esdhc *regs = priv->esdhc_regs;
+
+	esdhc_clrbits32(&regs->sdtimingctl, FLW_CTL_BG);
+	esdhc_clrbits32(&regs->sdclkctl, CMD_CLK_CTL);
+
+	esdhc_clock_control(priv, false);
+	esdhc_clrbits32(&regs->tbctl, HS400_MODE);
+	esdhc_clock_control(priv, true);
+
+	esdhc_clrbits32(&regs->dllcfg0, DLL_FREQ_SEL | DLL_ENABLE);
+	esdhc_clrbits32(&regs->tbctl, HS400_WNDW_ADJUST);
+
+	esdhc_tuning_block_enable(priv, false);
+}
+
 static void esdhc_set_timing(struct fsl_esdhc_priv *priv, enum bus_mode mode)
 {
 	struct fsl_esdhc *regs = priv->esdhc_regs;
 
+	/* Exit HS400 mode before setting any other mode */
+	if (esdhc_read32(&regs->tbctl) & HS400_MODE &&
+	    mode != MMC_HS_400)
+		esdhc_exit_hs400(priv);
+
 	esdhc_clock_control(priv, false);
 
 	if (mode == MMC_HS_200)
 		esdhc_clrsetbits32(&regs->autoc12err, UHSM_MASK,
 				   UHSM_SDR104_HS200);
+	if (mode == MMC_HS_400) {
+		esdhc_setbits32(&regs->tbctl, HS400_MODE);
+		esdhc_setbits32(&regs->sdclkctl, CMD_CLK_CTL);
+		esdhc_clock_control(priv, true);
 
+		esdhc_setbits32(&regs->dllcfg0, DLL_ENABLE | DLL_FREQ_SEL);
+		esdhc_setbits32(&regs->tbctl, HS400_WNDW_ADJUST);
+
+		esdhc_clock_control(priv, false);
+		esdhc_flush_async_fifo(priv);
+	}
 	esdhc_clock_control(priv, true);
 }
 
@@ -592,6 +661,9 @@ static int esdhc_set_ios_common(struct fsl_esdhc_priv *priv, struct mmc *mmc)
 		esdhc_clock_control(priv, true);
 	}
 
+	if (mmc->selected_mode == MMC_HS_400)
+		esdhc_tuning_block_enable(priv, true);
+
 	/* Set the clock speed */
 	if (priv->clock != mmc->clock)
 		set_sysctl(priv, mmc, mmc->clock);
@@ -987,38 +1059,6 @@ static int fsl_esdhc_reinit(struct udevice *dev)
 }
 
 #ifdef MMC_SUPPORTS_TUNING
-static void esdhc_flush_async_fifo(struct fsl_esdhc_priv *priv)
-{
-	struct fsl_esdhc *regs = priv->esdhc_regs;
-	u32 time_out;
-
-	esdhc_setbits32(&regs->esdhcctl, ESDHCCTL_FAF);
-
-	time_out = 20;
-	while (esdhc_read32(&regs->esdhcctl) & ESDHCCTL_FAF) {
-		if (time_out == 0) {
-			printf("fsl_esdhc: Flush asynchronous FIFO timeout.\n");
-			break;
-		}
-		time_out--;
-		mdelay(1);
-	}
-}
-
-static void esdhc_tuning_block_enable(struct fsl_esdhc_priv *priv,
-				      bool en)
-{
-	struct fsl_esdhc *regs = priv->esdhc_regs;
-
-	esdhc_clock_control(priv, false);
-	esdhc_flush_async_fifo(priv);
-	if (en)
-		esdhc_setbits32(&regs->tbctl, TBCTL_TB_EN);
-	else
-		esdhc_clrbits32(&regs->tbctl, TBCTL_TB_EN);
-	esdhc_clock_control(priv, true);
-}
-
 static int fsl_esdhc_execute_tuning(struct udevice *dev, uint32_t opcode)
 {
 	struct fsl_esdhc_plat *plat = dev_get_platdata(dev);
@@ -1046,8 +1086,11 @@ static int fsl_esdhc_execute_tuning(struct udevice *dev, uint32_t opcode)
 
 	esdhc_write32(&regs->irqstaten, irqstaten);
 
-	if (i != MAX_TUNING_LOOP)
+	if (i != MAX_TUNING_LOOP) {
+		if (plat->mmc.hs400_tuning)
+			esdhc_setbits32(&regs->sdtimingctl, FLW_CTL_BG);
 		return 0;
+	}
 
 	printf("fsl_esdhc: tuning failed!\n");
 	esdhc_clrbits32(&regs->autoc12err, SMPCLKSEL);
@@ -1057,6 +1100,14 @@ static int fsl_esdhc_execute_tuning(struct udevice *dev, uint32_t opcode)
 }
 #endif
 
+int fsl_esdhc_hs400_prepare_ddr(struct udevice *dev)
+{
+	struct fsl_esdhc_priv *priv = dev_get_priv(dev);
+
+	esdhc_tuning_block_enable(priv, false);
+	return 0;
+}
+
 static const struct dm_mmc_ops fsl_esdhc_ops = {
 	.get_cd		= fsl_esdhc_get_cd,
 	.send_cmd	= fsl_esdhc_send_cmd,
@@ -1065,6 +1116,7 @@ static const struct dm_mmc_ops fsl_esdhc_ops = {
 	.execute_tuning = fsl_esdhc_execute_tuning,
 #endif
 	.reinit = fsl_esdhc_reinit,
+	.hs400_prepare_ddr = fsl_esdhc_hs400_prepare_ddr,
 };
 
 static const struct udevice_id fsl_esdhc_ids[] = {
include/fsl_esdhc.h +12 -0
index aaa5941..b35ef0c 100644
@@ -176,6 +176,18 @@
 
 /* Tuning block control register */
 #define TBCTL_TB_EN		0x00000004
+#define HS400_MODE		0x00000010
+#define HS400_WNDW_ADJUST	0x00000040
+
+/* SD clock control register */
+#define CMD_CLK_CTL		0x00008000
+
+/* SD timing control register */
+#define FLW_CTL_BG		0x00008000
+
+/* DLL config 0 register */
+#define DLL_ENABLE		0x80000000
+#define DLL_FREQ_SEL		0x08000000
 
 #define MAX_TUNING_LOOP		40
 
Signature · 1 line
2.7.4
author
#14 lore raw

PATCH v3 8/11 mmc: fsl_esdhc: fix mmc->clock with actual clock

In reply to Yangbo Lu

Fix mmc->clock with actual clock which is divided by the controller, and record it with priv->clock which was removed accidentally.

---
Changes for v2:
- Added this patch.
Changes for v3:
- None.

---
 drivers/mmc/fsl_esdhc.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/mmc/fsl_esdhc.c +3 -0
index f2ab75c..716f53e 100644
@@ -523,6 +523,9 @@ static void set_sysctl(struct fsl_esdhc_priv *priv, struct mmc *mmc, uint clock)
 	while (sdhc_clk / (div * pre_div) > clock && div < 16)
 		div++;
 
+	mmc->clock = sdhc_clk / pre_div / div;
+	priv->clock = mmc->clock;
+
 	pre_div >>= 1;
 	div -= 1;
 
Signature · 1 line
2.7.4
author
#15 lore raw

PATCH v3 9/11 mmc: fsl_esdhc: fix eMMC HS400 stability issue

In reply to Yangbo Lu

There was a fix-up for eMMC HS400 stability issue in Linux.

Patch link:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/
commit/?id=58d0bf843b49fa99588ac9f85178bd8dfd651b53

Description:
Currently only LX2160A eSDHC supports eMMC HS400. According to a large number of tests, eMMC HS400 failed to work at 150MHz, and for a few boards failed to work at 175MHz. But eMMC HS400 worked fine on 200MHz. We hadn't found the root cause but setting eSDHC_DLLCFG0[DLL_FREQ_SEL] = 0 using slow delay chain seemed to resovle this issue. Let's use this as fixup for now.

Introduce the fix-up in u-boot since the issue could be reproduced in u-boot too.

---
Changes for v2:
- Added this patch.
Changes for v3:
- None.

---
 drivers/mmc/fsl_esdhc.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/mmc/fsl_esdhc.c +4 -1
index 716f53e..20e3ff9 100644
@@ -644,7 +644,10 @@ static void esdhc_set_timing(struct fsl_esdhc_priv *priv, enum bus_mode mode)
 		esdhc_setbits32(&regs->sdclkctl, CMD_CLK_CTL);
 		esdhc_clock_control(priv, true);
 
-		esdhc_setbits32(&regs->dllcfg0, DLL_ENABLE | DLL_FREQ_SEL);
+		if (priv->clock == 200000000)
+			esdhc_setbits32(&regs->dllcfg0, DLL_FREQ_SEL);
+
+		esdhc_setbits32(&regs->dllcfg0, DLL_ENABLE);
 		esdhc_setbits32(&regs->tbctl, HS400_WNDW_ADJUST);
 
 		esdhc_clock_control(priv, false);
Signature · 1 line
2.7.4
author
#16 lore raw

PATCH v3 10/11 arm: dts: lx2160ardb: support eMMC HS400 mode

In reply to Yangbo Lu

Add properties related to eMMC HS400 mode.

mmc-hs400-1_8v;
bus-width = <8>;

They had been already in kernel dts file since the first lx2160ardb dts patch.

b068890 arm64: dts: add LX2160ARDB board support

---
Changes for v2:
- None.
Changes for v3:
- Explained more in commit message.

---
 arch/arm/dts/fsl-lx2160a-rdb.dts | 2 ++
 1 file changed, 2 insertions(+)
arch/arm/dts/fsl-lx2160a-rdb.dts +2 -0
index d787778..5fbdd90 100644
@@ -80,6 +80,8 @@
 &esdhc1 {
 	status = "okay";
 	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
 };
 
 &fspi {
Signature · 1 line
2.7.4
author
#17 lore raw

PATCH v3 11/11 configs: lx2160ardb: enable eMMC HS400 mode support

In reply to Yangbo Lu

Enable eMMC HS400 mode support on LX2160ARDB.

---
Changes for v2:
- None.
Changes for v3:
- None.

---
 configs/lx2160ardb_tfa_SECURE_BOOT_defconfig | 1 +
 configs/lx2160ardb_tfa_defconfig             | 1 +
 configs/lx2160ardb_tfa_stmm_defconfig        | 1 +
 3 files changed, 3 insertions(+)
configs/lx2160ardb_tfa_SECURE_BOOT_defconfig +1 -0
index 12e224f..6c65853 100644
@@ -40,6 +40,7 @@ CONFIG_DM_I2C=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
 CONFIG_I2C_DEFAULT_BUS_NUMBER=0
 CONFIG_DM_MMC=y
+CONFIG_MMC_HS400_SUPPORT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
configs/lx2160ardb_tfa_defconfig +1 -0
index a5c78d2..a5c60c8 100644
@@ -46,6 +46,7 @@ CONFIG_DM_I2C=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
 CONFIG_I2C_DEFAULT_BUS_NUMBER=0
 CONFIG_DM_MMC=y
+CONFIG_MMC_HS400_SUPPORT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
configs/lx2160ardb_tfa_stmm_defconfig +1 -0
index e97c9b0..869d4e2 100644
@@ -48,6 +48,7 @@ CONFIG_DM_I2C=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
 CONFIG_I2C_DEFAULT_BUS_NUMBER=0
 CONFIG_DM_MMC=y
+CONFIG_MMC_HS400_SUPPORT=y
 CONFIG_SUPPORT_EMMC_RPMB=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
Signature · 1 line
2.7.4
author
#18 lore raw

v3 cover mmc: fsl_esdhc: support eMMC HS200/HS400 modes

In reply to Yangbo Lu

Any commets on the v3 patch-set.
Thanks!

Best regards,
Yangbo Lu

Quoted 52 lines

-----Original Message-----
From: Yangbo Lu <[email protected]>
Sent: Thursday, July 23, 2020 12:30 PM
To: u-boot at lists.denx.de; Peng Fan <[email protected]>; Priyanka Jain <[email protected]>; 'Jaehoon Chung' <[email protected]>
Cc: Y.b. Lu <[email protected]>
Subject: [v3, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes

This patch-set is to support eMMC HS200 and HS400 speed modes for eSDHC, and enable them on LX2160ARDB board.

CI build link
https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Ftravis-ci
.org%2Fgithub%2Fyangbolu1991%2Fu-boot-test%2Fbuilds%2F710977092&a mp;data=02%7C01%7Cyangbo.lu%40nxp.com%7Cad44ad82358841b1750d08 d82ec207a0%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C63731 0758167126235&amp;sdata=u8fiHRayfKhk%2FiFGjXItjlHmyWWk9MMqbWHz WeId60c%3D&amp;reserved=0

Changes for v2:
- Added two patches to fix stability issue.
Changes for v3:
- Explained more in commit messages.
- Added HS400 exit code for downgrade.

Yangbo Lu (11):
mmc: add a reinit() API
mmc: fsl_esdhc: add a reinit() callback
mmc: fsl_esdhc: support tuning for eMMC HS200
mmc: fsl_esdhc: clean TBCTL[TB_EN] manually during init
mmc: add a hs400_tuning flag
mmc: add a mmc_hs400_prepare_ddr() interface
mmc: fsl_esdhc: support eMMC HS400 mode
mmc: fsl_esdhc: fix mmc->clock with actual clock
mmc: fsl_esdhc: fix eMMC HS400 stability issue
arm: dts: lx2160ardb: support eMMC HS400 mode
configs: lx2160ardb: enable eMMC HS400 mode support

 arch/arm/dts/fsl-lx2160a-rdb.dts             |   2 +
 configs/lx2160ardb_tfa_SECURE_BOOT_defconfig |   1 +
 configs/lx2160ardb_tfa_defconfig             |   1 +
 configs/lx2160ardb_tfa_stmm_defconfig        |   1 +
 drivers/mmc/fsl_esdhc.c                      | 176
++++++++++++++++++++++++++-
 drivers/mmc/mmc-uclass.c                     |  30 +++++
 drivers/mmc/mmc.c                            |  12 +-
 include/fsl_esdhc.h                          |  29 ++++-
 include/mmc.h                                |  26 +++-
 9 files changed, 268 insertions(+), 10 deletions(-)

--
2.7.4

#19 lore raw

v3 cover mmc: fsl_esdhc: support eMMC HS200/HS400 modes

Hi Yangbo,

Quoted 2 lines · Y.b. Lu

Any commets on the v3 patch-set.
Thanks!

Sorry for late. I will test with your patch on my target. Today, i will reply about your patch.

Best Regards,
Jaehoon Chung

Quoted 58 lines

Best regards,
Yangbo Lu

Quoted 52 lines

-----Original Message-----
From: Yangbo Lu <[email protected]>
Sent: Thursday, July 23, 2020 12:30 PM
To: u-boot at lists.denx.de; Peng Fan <[email protected]>; Priyanka Jain <[email protected]>; 'Jaehoon Chung' <[email protected]>
Cc: Y.b. Lu <[email protected]>
Subject: [v3, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes

This patch-set is to support eMMC HS200 and HS400 speed modes for eSDHC, and enable them on LX2160ARDB board.

CI build link
https://protect2.fireeye.com/v1/url?k=035d63a4-5e936277-035ce8eb-000babff317b-31e05acd460d6c4f&q=1&e=0b204f55-99b2-446d-9800-90ff26476621&u=https%3A%2F%2Feur01.safelinks.protection.outlook.com%2F%3Furl%3Dhttps%253A%252F%252Ftravis-ci
.org%2Fgithub%2Fyangbolu1991%2Fu-boot-test%2Fbuilds%2F710977092&a mp;data=02%7C01%7Cyangbo.lu%40nxp.com%7Cad44ad82358841b1750d08 d82ec207a0%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C63731 0758167126235&amp;sdata=u8fiHRayfKhk%2FiFGjXItjlHmyWWk9MMqbWHz WeId60c%3D&amp;reserved=0

Changes for v2:
- Added two patches to fix stability issue.
Changes for v3:
- Explained more in commit messages.
- Added HS400 exit code for downgrade.

Yangbo Lu (11):
mmc: add a reinit() API
mmc: fsl_esdhc: add a reinit() callback
mmc: fsl_esdhc: support tuning for eMMC HS200
mmc: fsl_esdhc: clean TBCTL[TB_EN] manually during init
mmc: add a hs400_tuning flag
mmc: add a mmc_hs400_prepare_ddr() interface
mmc: fsl_esdhc: support eMMC HS400 mode
mmc: fsl_esdhc: fix mmc->clock with actual clock
mmc: fsl_esdhc: fix eMMC HS400 stability issue
arm: dts: lx2160ardb: support eMMC HS400 mode
configs: lx2160ardb: enable eMMC HS400 mode support

 arch/arm/dts/fsl-lx2160a-rdb.dts             |   2 +
 configs/lx2160ardb_tfa_SECURE_BOOT_defconfig |   1 +
 configs/lx2160ardb_tfa_defconfig             |   1 +
 configs/lx2160ardb_tfa_stmm_defconfig        |   1 +
 drivers/mmc/fsl_esdhc.c                      | 176
++++++++++++++++++++++++++-
 drivers/mmc/mmc-uclass.c                     |  30 +++++
 drivers/mmc/mmc.c                            |  12 +-
 include/fsl_esdhc.h                          |  29 ++++-
 include/mmc.h                                |  26 +++-
 9 files changed, 268 insertions(+), 10 deletions(-)

--
2.7.4