Skip to contentSkip to conversation

PCI: cadence: Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property

bug report [email protected] 1 participant 1 message Jul 27, 2020 PCI

lore
Share & tools
lore
#0 lore raw

Hello Kishon Vijay Abraham I,

The patch 82d8567259b1: "PCI: cadence: Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property" from Jul 22, 2020, leads to the following static checker warning:

drivers/pci/controller/cadence/pcie-cadence-host.c:322 cdns_pcie_host_map_dma_ranges()
warn: ignoring unreachable code.

drivers/pci/controller/cadence/pcie-cadence-host.c
296 static int cdns_pcie_host_map_dma_ranges(struct cdns_pcie_rc *rc) 297 {

   298          struct cdns_pcie *pcie = &rc->pcie;
   299          struct device *dev = pcie->dev;
   300          struct device_node *np = dev->of_node;
   301          struct pci_host_bridge *bridge;
   302          struct resource_entry *entry;
   303          u32 no_bar_nbits = 32;
   304          int err;

305
306 bridge = pci_host_bridge_from_priv(rc);
307 if (!bridge)
308 return -ENOMEM;
309
310 if (list_empty(&bridge->dma_ranges)) {
311 of_property_read_u32(np, "cdns,no-bar-match-nbits",
312 &no_bar_nbits);
313 err = cdns_pcie_host_bar_ib_config(rc, RP_NO_BAR, 0x0,
314 (u64)1 << no_bar_nbits, 0);
315 if (err)
316 dev_err(dev, "IB BAR: %d config failed\n", RP_NO_BAR);
317 return err;
318 }
319
320 list_sort(NULL, &bridge->dma_ranges, cdns_pcie_host_dma_ranges_cmp);
321
322 resource_list_for_each_entry(entry, &bridge->dma_ranges) {

That static checker is complaining that we only use the first entry in the list. This is often intentional so I have normally just silence these..

323 err = cdns_pcie_host_bar_config(rc, entry);
324 if (err)
325 dev_err(dev, "Fail to configure IB using dma-ranges\n");
326 return err;

But in this case, it's possible that it wasn't intentional. Anyway, I figure you know the answer instantly since the code is new so hopefully it's not too much bother.

327 }
328
329 return 0;
330 }

regards,
dan carpenter