kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled
PATCH 1/2 kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled
Currently, the top Makefile includes all of scripts/Makefile.<feature> even if the associated CONFIG option is disabled.
Do not include unneeded Makefiles in order to slightly optimize the parse stage.
Include $(include-y), and ignore $(include-).
Signed-off-by Masahiro Yamada <[email protected]>
---
Makefile | 16 +++++++++------- scripts/Makefile.kcov | 4 ---- scripts/Makefile.kcsan | 4 ---- scripts/Makefile.ubsan | 3 --- 4 files changed, 9 insertions(+), 18 deletions(-)
Makefile +9 -7
@@ -745,9 +745,6 @@ endif KBUILD_CFLAGS += $(call cc-option,--param=allow-store-data-races=0) KBUILD_CFLAGS += $(call cc-option,-fno-allow-store-data-races) -include scripts/Makefile.kcov -include scripts/Makefile.gcc-plugins - ifdef CONFIG_READABLE_ASM # Disable optimizations that make assembler listings hard to read. # reorder blocks reorders the control in the function
@@ -948,10 +945,15 @@ ifdef CONFIG_RETPOLINE KBUILD_CFLAGS += $(call cc-option,-fcf-protection=none) endif -include scripts/Makefile.kasan -include scripts/Makefile.extrawarn -include scripts/Makefile.ubsan -include scripts/Makefile.kcsan +# include additional Makefiles when needed +include-y := scripts/Makefile.extrawarn +include-$(CONFIG_KASAN) += scripts/Makefile.kasan +include-$(CONFIG_KCSAN) += scripts/Makefile.kcsan +include-$(CONFIG_UBSAN) += scripts/Makefile.ubsan +include-$(CONFIG_KCOV) += scripts/Makefile.kcov +include-$(CONFIG_GCC_PLUGINS) += scripts/Makefile.gcc-plugins + +include $(addprefix $(srctree)/, $(include-y)) # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments KBUILD_CPPFLAGS += $(KCPPFLAGS)
scripts/Makefile.kcov +0 -4
@@ -1,10 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only -ifdef CONFIG_KCOV - kcov-flags-$(CONFIG_CC_HAS_SANCOV_TRACE_PC) += -fsanitize-coverage=trace-pc kcov-flags-$(CONFIG_KCOV_ENABLE_COMPARISONS) += -fsanitize-coverage=trace-cmp kcov-flags-$(CONFIG_GCC_PLUGIN_SANCOV) += -fplugin=$(objtree)/scripts/gcc-plugins/sancov_plugin.so export CFLAGS_KCOV := $(kcov-flags-y) - -endif
scripts/Makefile.kcsan +0 -4
@@ -1,6 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -ifdef CONFIG_KCSAN - # GCC and Clang accept backend options differently. Do not wrap in cc-option, # because Clang accepts "--param" even if it is unused. ifdef CONFIG_CC_IS_CLANG
@@ -15,5 +13,3 @@ CFLAGS_KCSAN := -fsanitize=thread \ $(call cc-option,$(call cc-param,tsan-instrument-func-entry-exit=0) -fno-optimize-sibling-calls) \ $(call cc-option,$(call cc-param,tsan-instrument-read-before-write=1)) \ $(call cc-param,tsan-distinguish-volatile=1) - -endif # CONFIG_KCSAN
scripts/Makefile.ubsan +0 -3
@@ -1,6 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -ifdef CONFIG_UBSAN - ifdef CONFIG_UBSAN_ALIGNMENT CFLAGS_UBSAN += $(call cc-option, -fsanitize=alignment) endif
@@ -26,4 +24,3 @@ endif # -fsanitize=* options makes GCC less smart than usual and # increase number of 'maybe-uninitialized false-positives CFLAGS_UBSAN += $(call cc-option, -Wno-maybe-uninitialized) -endif
Signature · 1 line
2.25.1
PATCH 2/2 kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base
Commit d26e94149276 ("kbuild: no gcc-plugins during cc-option tests") was neeeded because scripts/Makefile.gcc-plugins was too early.
This is unneeded by including scripts/Makefile.gcc-plugins last, and being careful to not add cc-option tests after it.
Signed-off-by Masahiro Yamada <[email protected]>
---
Makefile | 5 ++++- scripts/Kbuild.include | 10 +++------- 2 files changed, 7 insertions(+), 8 deletions(-)
Makefile +4 -1
@@ -506,7 +506,6 @@ KBUILD_CFLAGS_MODULE := -DMODULE KBUILD_LDFLAGS_MODULE := export KBUILD_LDS_MODULE := $(srctree)/scripts/module-common.lds KBUILD_LDFLAGS := -GCC_PLUGINS_CFLAGS := CLANG_FLAGS := export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC
@@ -955,6 +954,10 @@ include-$(CONFIG_GCC_PLUGINS) += scripts/Makefile.gcc-plugins include $(addprefix $(srctree)/, $(include-y)) +# scripts/Makefile.gcc-plugins is intentionally included last. +# Do not add $(call cc-option,...) below this line. When you build the kernel +# from the clean source tree, the GCC plugins do not exist at this point. + # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments KBUILD_CPPFLAGS += $(KCPPFLAGS) KBUILD_AFLAGS += $(KAFLAGS)
scripts/Kbuild.include +3 -7
@@ -119,25 +119,21 @@ as-instr = $(call try-run,\ __cc-option = $(call try-run,\ $(1) -Werror $(2) $(3) -c -x c /dev/null -o "$$TMP",$(3),$(4)) -# Do not attempt to build with gcc plugins during cc-option tests. -# (And this uses delayed resolution so the flags will be up to date.) -CC_OPTION_CFLAGS = $(filter-out $(GCC_PLUGINS_CFLAGS),$(KBUILD_CFLAGS)) - # cc-option # Usage: cflags-y += $(call cc-option,-march=winchip-c6,-march=i586) cc-option = $(call __cc-option, $(CC),\ - $(KBUILD_CPPFLAGS) $(CC_OPTION_CFLAGS),$(1),$(2)) + $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS),$(1),$(2)) # cc-option-yn # Usage: flag := $(call cc-option-yn,-march=winchip-c6) cc-option-yn = $(call try-run,\ - $(CC) -Werror $(KBUILD_CPPFLAGS) $(CC_OPTION_CFLAGS) $(1) -c -x c /dev/null -o "$$TMP",y,n) + $(CC) -Werror $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(1) -c -x c /dev/null -o "$$TMP",y,n) # cc-disable-warning # Usage: cflags-y += $(call cc-disable-warning,unused-but-set-variable) cc-disable-warning = $(call try-run,\ - $(CC) -Werror $(KBUILD_CPPFLAGS) $(CC_OPTION_CFLAGS) -W$(strip $(1)) -c -x c /dev/null -o "$$TMP",-Wno-$(strip $(1))) + $(CC) -Werror $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) -W$(strip $(1)) -c -x c /dev/null -o "$$TMP",-Wno-$(strip $(1))) # cc-ifversion # Usage: EXTRA_CFLAGS += $(call cc-ifversion, -lt, 0402, -O1)
Signature · 1 line
2.25.1