hw/arm/virt: Introduce kvm-steal-time
v2 cover hw/arm/virt: Introduce kvm-steal-time
v2:
- Changed the introduction of the feature to 5.2 from 5.1 (The 5.2 machine type patch posted by Cornelia was thrown in for completeness, but I suppose that'll get picked up separately.)
- Added a patch adding g_assert_not_reached() to many KVM stubs. (This isn't exactly related to the series, but the series does add two more stubs that can now be added in the same way.)
- Fixed a patch that wasn't suppose to have a functional change, but did (fdt_add_gic_node() shouldn't generate the node without the PMU) [Peter]
- Pass sysmem to virt_cpu_post_init() [Peter]
- Introduced a define for the pvtime struct size
- Calculate the pvtime memory region size based on max-cpus and host-page-size [Beata]
- Renamed kvm_no_steal_time to no_kvm_steal_time [Peter]
- Fixed a parameter misordering with object_property_set_bool()
- Added a comment explaining why the feature isn't supported for AArch32 guests
- Changed a !kvm_steal_time to a kvm_steal_time == ON_OFF_AUTO_OFF as it should be
- Picked up one r-b from Peter
KVM supports the ability to publish the amount of time that VCPUs were runnable, but not running due to other host threads running instead, to the guest. The guest scheduler may use that information when making decisions and the guest may expose it to its userspace (Linux publishes this information in /proc/stat). This feature is called "steal time" as it represents the amount of time stolen from a guest by scheduling out its VCPUs. To enable this feature KVM userspace must provide a memory region that will be used to publish the information to the guest. The memory region is typical migratable region. The GPA of the region is given to KVM through a VCPU device ioctl interface. This feature is only available for 64-bit hosts running 64-bit guests.
This series provides the QEMU support of this feature. It will be enabled by default for 5.2 machine types and later, but may be disabled with a new CPU property "kvm-steal-time".
While testing migration it was observed that the amount of steal time as viewed by the guest was getting reset on each migration. Patch 4/6 of a pvtime fix series posted[*] for KVM should fix that. Also, we may still want to change the way we probe KVM for the feature in this QEMU series to the new KVM cap proposed in that KVM series.
Migration testing:
* virt-5.1 can migrate as usual, no steal-time enabled
* virt-5.2 can migrate between hosts with steal-time enabled (the default) and disabled when both hosts support steal-time
* virt-5.2 with steal-time disabled can migrate to a host that does not support steal-time
* virt-5.2 with steal-time enabled will cleanly fail when migrating to a host that does not support steal-time
* virt-5.2 without the kvm-steal-time property specified can boot on a host that does not support the feature - the feature will be disabled. However, if the guest is migrated to a host that does support the feature, then after the guest has reboot the feature will become available with the guest kernel supports it (this is the nature of migrating guests that use '-cpu host'). Additionally, once this guest has been migrated to a host that does have the feature, then it will fail (cleanly) to migrate to a host that does not have the feature. If this behavior isn't desired, then the user should explicitly disable steal-time with the kvm-steal-time property if they want to boot a 5.2 guest on a host that doesn't support steal-time.
[*] https://lists.cs.columbia.edu/pipermail/kvmarm/2020-August/041823.html
Thanks,
drew
Andrew Jones (4):
target/arm/kvm: Make uncalled stubs explicitly unreachable hw/arm/virt: Move post cpu realize check into its own function hw/arm/virt: Move kvm pmu setup to virt_cpu_post_init hw/arm/virt: Implement kvm-steal-time
Cornelia Huck (1):
hw: add compat machines for 5.2
docs/system/arm/cpu-features.rst | 11 +++ hw/arm/virt.c | 119 +++++++++++++++++++++++-------- hw/core/machine.c | 3 + hw/i386/pc.c | 6 +- hw/i386/pc_piix.c | 14 +++- hw/i386/pc_q35.c | 13 +++- hw/ppc/spapr.c | 15 +++- hw/s390x/s390-virtio-ccw.c | 14 +++- include/hw/arm/virt.h | 5 ++ include/hw/boards.h | 3 + include/hw/i386/pc.h | 3 + target/arm/cpu.c | 10 +++ target/arm/cpu.h | 4 ++ target/arm/kvm.c | 20 ++++++ target/arm/kvm32.c | 5 ++ target/arm/kvm64.c | 77 ++++++++++++++++++-- target/arm/kvm_arm.h | 74 ++++++++++++++----- target/arm/monitor.c | 2 +- tests/qtest/arm-cpu-features.c | 25 +++++-- 19 files changed, 358 insertions(+), 65 deletions(-)
Signature · 1 line
2.25.4
PATCH v2 1/5 hw: add compat machines for 5.2
From: Cornelia Huck <[email protected]>
Add 5.2 machine types for arm/i440fx/q35/s390x/spapr.
--- hw/arm/virt.c | 9 ++++++++- hw/core/machine.c | 3 +++ hw/i386/pc.c | 6 ++++-- hw/i386/pc_piix.c | 14 +++++++++++++- hw/i386/pc_q35.c | 13 ++++++++++++- hw/ppc/spapr.c | 15 +++++++++++++-- hw/s390x/s390-virtio-ccw.c | 14 +++++++++++++- include/hw/boards.h | 3 +++ include/hw/i386/pc.h | 3 +++ 9 files changed, 72 insertions(+), 8 deletions(-)
hw/arm/virt.c +8 -1
@@ -2546,10 +2546,17 @@ static void machvirt_machine_init(void) }type_init (machvirt_machine_init); +static void virt_machine_5_2_options (MachineClass *mc) +{ +} +DEFINE_VIRT_MACHINE_AS_LATEST(5, 2) +static void virt_machine_5_1_options (MachineClass *mc) { +virt_machine_5_2_options (mc); +compat_props_add (mc->compat_props, hw_compat_5_1, hw_compat_5_1_len); } -DEFINE_VIRT_MACHINE_AS_LATEST(5, 1) +DEFINE_VIRT_MACHINE(5, 1)static void virt_machine_5_0_options (MachineClass *mc) {
hw/core/machine.c +3 -0
@@ -28,6 +28,9 @@#include "hw/mem/nvdimm.h" #include "migration/vmstate.h" +GlobalProperty hw_compat_5_1[] = {}; +const size_t hw_compat_5_1_len =G_N_ELEMENTS (hw_compat_5_1); +GlobalProperty hw_compat_5_0[] = { {"pci-host-bridge" ,"x-config-reg-migration-enabled" ,"off" }, {"virtio-balloon-device" ,"page-poison" ,"false" },
hw/i386/pc.c +4 -2
@@ -97,8 +97,10 @@#include "fw_cfg.h" #include "trace.h" -GlobalProperty pc_compat_5_0[] = { -}; +GlobalProperty pc_compat_5_1[] = {}; +const size_t pc_compat_5_1_len =G_N_ELEMENTS (pc_compat_5_1); + +GlobalProperty pc_compat_5_0[] = {};const size_t pc_compat_5_0_len =G_N_ELEMENTS (pc_compat_5_0);GlobalProperty pc_compat_4_2[] = {
hw/i386/pc_piix.c +13 -1
@@ -426,7 +426,7 @@ static void pc_i440fx_machine_options(MachineClass *m)machine_class_allow_dynamic_sysbus_dev (m,TYPE_VMBUS_BRIDGE ); } -static void pc_i440fx_5_1_machine_options (MachineClass *m) +static void pc_i440fx_5_2_machine_options (MachineClass *m) {PCMachineClass *pcmc =PC_MACHINE_CLASS (m);pc_i440fx_machine_options (m);
@@ -435,6 +435,18 @@ static void pc_i440fx_5_1_machine_options(MachineClass *m) pcmc->default_cpu_version =1 ; } +DEFINE_I440FX_MACHINE (v5_2,"pc-i440fx-5.2" ,NULL , + pc_i440fx_5_2_machine_options); + +static void pc_i440fx_5_1_machine_options (MachineClass *m) +{ +pc_i440fx_5_2_machine_options (m); + m->alias =NULL ; + m->is_default = false; +compat_props_add (m->compat_props, hw_compat_5_1, hw_compat_5_1_len); +compat_props_add (m->compat_props, pc_compat_5_1, pc_compat_5_1_len); +} +DEFINE_I440FX_MACHINE (v5_1,"pc-i440fx-5.1" ,NULL , pc_i440fx_5_1_machine_options);
hw/i386/pc_q35.c +12 -1
@@ -353,7 +353,7 @@ static void pc_q35_machine_options(MachineClass *m) m->max_cpus =288 ; } -static void pc_q35_5_1_machine_options (MachineClass *m) +static void pc_q35_5_2_machine_options (MachineClass *m) {PCMachineClass *pcmc =PC_MACHINE_CLASS (m);pc_q35_machine_options (m);
@@ -361,6 +361,17 @@ static void pc_q35_5_1_machine_options(MachineClass *m) pcmc->default_cpu_version =1 ; } +DEFINE_Q35_MACHINE (v5_2,"pc-q35-5.2" ,NULL , + pc_q35_5_2_machine_options); + +static void pc_q35_5_1_machine_options (MachineClass *m) +{ +pc_q35_5_2_machine_options (m); + m->alias =NULL ; +compat_props_add (m->compat_props, hw_compat_5_1, hw_compat_5_1_len); +compat_props_add (m->compat_props, pc_compat_5_1, pc_compat_5_1_len); +} +DEFINE_Q35_MACHINE (v5_1,"pc-q35-5.1" ,NULL , pc_q35_5_1_machine_options);
hw/ppc/spapr.c +13 -2
@@ -4579,15 +4579,26 @@ static void spapr_machine_latest_class_options(MachineClass *mc) } \ type_init(spapr_machine_register_##suffix) +/* +* pseries-5.2 +*/ +static void spapr_machine_5_2_class_options(MachineClass *mc) +{ +/* Defaults for the latest behaviour inherited from the base class */ +} + +DEFINE_SPAPR_MACHINE(5_2, "5.2", true); +/* * pseries-5.1 */ static void spapr_machine_5_1_class_options (MachineClass *mc) { -/* Defaults for the latest behaviour inherited from the base class */ +spapr_machine_5_2_class_options (mc); +compat_props_add (mc->compat_props, hw_compat_5_1, hw_compat_5_1_len); } -DEFINE_SPAPR_MACHINE(5_1, "5.1", true); +DEFINE_SPAPR_MACHINE(5_1, "5.1", false);/* * pseries-5.0
hw/s390x/s390-virtio-ccw.c +13 -1
@@ -801,14 +801,26 @@ bool css_migration_enabled(void) } \ type_init(ccw_machine_register_##suffix) +static void ccw_machine_5_2_instance_options(MachineState *machine) +{ +} + +static void ccw_machine_5_2_class_options (MachineClass *mc) +{ +} +DEFINE_CCW_MACHINE(5_2, "5.2", true); +static void ccw_machine_5_1_instance_options (MachineState *machine) { +ccw_machine_5_2_instance_options (machine); }static void ccw_machine_5_1_class_options (MachineClass *mc) { +ccw_machine_5_2_class_options (mc); +compat_props_add (mc->compat_props, hw_compat_5_1, hw_compat_5_1_len); } -DEFINE_CCW_MACHINE(5_1, "5.1", true); +DEFINE_CCW_MACHINE(5_1, "5.1", false);static void ccw_machine_5_0_instance_options (MachineState *machine) {
include/hw/boards.h +3 -0
@@ -319,6 +319,9 @@ struct MachineState { } \ type_init(machine_initfn##_register_types) +extern GlobalProperty hw_compat_5_1[]; +extern const size_t hw_compat_5_1_len; +extern GlobalProperty hw_compat_5_0[];extern const size_t hw_compat_5_0_len;
include/hw/i386/pc.h +3 -0
@@ -193,6 +193,9 @@ void pc_system_firmware_init(PCMachineState *pcms, MemoryRegion *rom_memory);void pc_madt_cpu_entry (AcpiDeviceIf *adev,int uid,const CPUArchIdList *apic_ids,GArray *entry); +extern GlobalProperty pc_compat_5_1[]; +extern const size_t pc_compat_5_1_len; +extern GlobalProperty pc_compat_5_0[];extern const size_t pc_compat_5_0_len;
Signature · 1 line
2.25.4
PATCH v2 2/5 target/arm/kvm: Make uncalled stubs explicitly unreachable
In reply to Andrew JonesWhen we compile without KVM support !defined(CONFIG_KVM) we generate stubs for functions that the linker will still encounter. Sometimes these stubs can be executed safely and are placed in paths where they get executed with or without KVM. Other functions should never be called without KVM. Those functions should be guarded by kvm_enabled(), but should also be robust to refactoring mistakes. Putting a g_assert_not_reached() in the function should help. Additionally, the g_assert_not_reached() calls may actually help the linker remove some code.
We remove the stubs for kvm_arm_get/put_virtual_time(), as they aren't necessary at all - the only caller is in kvm.c
--- target/arm/kvm_arm.h | 44 +++++++++++++++++++++++++++----------------- 1 file changed, 27 insertions(+), 17 deletions(-)
target/arm/kvm_arm.h +27 -17
@@ -344,16 +344,10 @@ int kvm_arm_set_irq(int cpu, int irqtype, int irq, int level);#else -static inline void kvm_arm_set_cpu_features_from_host (ARMCPU *cpu) -{ -/* -* This should never actually be called in the "not KVM" case, -* but set up the fields to indicate an error anyway. -*/ - cpu->kvm_target =QEMU_KVM_ARM_TARGET_NONE ; - cpu->host_cpu_probe_failed = true; -} - +/* +* It's safe to call these functions without KVM support. +* They should either do nothing or return "not supported". +*/ static inline void kvm_arm_add_vcpu_properties (Object *obj) {}static inline bool kvm_arm_aarch32_supported (void )
@@ -371,23 +365,39 @@ static inline bool kvm_arm_sve_supported(void) return false; } +/* +* These functions should never actually be called without KVM support. +*/ +static inline void kvm_arm_set_cpu_features_from_host (ARMCPU *cpu) +{ +g_assert_not_reached (); +} +static inline int kvm_arm_get_max_vm_ipa_size (MachineState *ms) { -return -ENOENT ; +g_assert_not_reached (); }static inline int kvm_arm_vgic_probe (void ) { -return 0 ; +g_assert_not_reached (); } -static inline void kvm_arm_pmu_set_irq (CPUState *cs,int irq) {} -static inline void kvm_arm_pmu_init (CPUState *cs) {} +static inline void kvm_arm_pmu_set_irq (CPUState *cs,int irq) +{ +g_assert_not_reached (); +} -static inline void kvm_arm_sve_get_vls (CPUState *cs,unsigned long *map) {} +static inline void kvm_arm_pmu_init (CPUState *cs) +{ +g_assert_not_reached (); +} + +static inline void kvm_arm_sve_get_vls (CPUState *cs,unsigned long *map) +{ +g_assert_not_reached (); +} -static inline void kvm_arm_get_virtual_time (CPUState *cs) {} -static inline void kvm_arm_put_virtual_time (CPUState *cs) {}#endif static inline const char *gic_class_name (void )
Signature · 1 line
2.25.4
Re: [PATCH v2 2/5] target/arm/kvm: Make uncalled stubs explicitly unreachable
Hi Drew,
Quoted 31 lines · Andrew Jones
When we compile without KVM support !defined(CONFIG_KVM) we generate stubs for functions that the linker will still encounter. Sometimes these stubs can be executed safely and are placed in paths where they get executed with or without KVM. Other functions should never be called without KVM. Those functions should be guarded by
kvm_enabled(), but should also be robust to refactoring mistakes. Putting ag_assert_not_reached()in the function should help. Additionally, theg_assert_not_reached()calls may actually help the linker remove some code.We remove the stubs for kvm_arm_get/put_virtual_time(), as they aren't necessary at all - the only caller is in
kvm.cSigned-off-by Andrew Jones <[email protected]>--- target/arm/kvm_arm.h | 44 +++++++++++++++++++++++++++----------------- 1 file changed, 27 insertions(+), 17 deletions(-)target/arm/kvm_arm.h +0
-5@@ -344,16 +344,10 @@ int kvm_arm_set_irq(int cpu, int irqtype, int irq, int level);#else -static inline void kvm_arm_set_cpu_features_from_host (ARMCPU *cpu) -{ -/* -* This should never actually be called in the "not KVM" case, -* but set up the fields to indicate an error anyway.
target/arm/kvm_arm.h int kvm_arm_set_irq(int cpu, int irqtype, int irq, int level); · line 351
Quoted 10 lines
target/arm/kvm_arm.h +4
-5-*/ - cpu->kvm_target =QEMU_KVM_ARM_TARGET_NONE ; - cpu->host_cpu_probe_failed = true; -} - +/* +* It's safe to call these functions without KVM support. +* They should either do nothing or return "not supported". +*/ static inline void kvm_arm_add_vcpu_properties (Object *obj) {}
this one also is guarded by kvm_enabled() in target/arm/cpu.c don't you want to add g_assert_not_reached()?
Quoted 40 lines
target/arm/kvm_arm.h +19
-5static inline bool kvm_arm_aarch32_supported (void )@@ -371,23 +365,39 @@ static inline bool kvm_arm_sve_supported(void)return false; } +/* +* These functions should never actually be called without KVM support. +*/ +static inline void kvm_arm_set_cpu_features_from_host (ARMCPU *cpu) +{ +g_assert_not_reached (); +} +static inline int kvm_arm_get_max_vm_ipa_size (MachineState *ms) { -return -ENOENT ; +g_assert_not_reached (); }static inline int kvm_arm_vgic_probe (void ) { -return 0 ; +g_assert_not_reached (); } -static inline void kvm_arm_pmu_set_irq (CPUState *cs,int irq) {} -static inline void kvm_arm_pmu_init (CPUState *cs) {} +static inline void kvm_arm_pmu_set_irq (CPUState *cs,int irq) +{ +g_assert_not_reached (); +} -static inline void kvm_arm_sve_get_vls (CPUState *cs,unsigned long *map) {} +static inline void kvm_arm_pmu_init (CPUState *cs) +{ +g_assert_not_reached (); +} +
target/arm/kvm_arm.h static inline bool kvm_arm_sve_supported(void) · line 403
Quoted 10 lines
target/arm/kvm_arm.h +4
-2+static inline void kvm_arm_sve_get_vls (CPUState *cs,unsigned long *map) +{ +g_assert_not_reached (); +} -static inline void kvm_arm_get_virtual_time (CPUState *cs) {} -static inline void kvm_arm_put_virtual_time (CPUState *cs) {}#endif static inline const char *gic_class_name (void )
Besides,
Thanks
Eric
Re: [PATCH v2 2/5] target/arm/kvm: Make uncalled stubs explicitly unreachable
Quoted 38 lines · Auger Eric
Hi Drew,
Quoted 35 lines · Andrew Jones
When we compile without KVM support !defined(CONFIG_KVM) we generate stubs for functions that the linker will still encounter. Sometimes these stubs can be executed safely and are placed in paths where they get executed with or without KVM. Other functions should never be called without KVM. Those functions should be guarded by
kvm_enabled(), but should also be robust to refactoring mistakes. Putting ag_assert_not_reached()in the function should help. Additionally, theg_assert_not_reached()calls may actually help the linker remove some code.We remove the stubs for kvm_arm_get/put_virtual_time(), as they aren't necessary at all - the only caller is in
kvm.cSigned-off-by Andrew Jones <[email protected]>--- target/arm/kvm_arm.h | 44 +++++++++++++++++++++++++++----------------- 1 file changed, 27 insertions(+), 17 deletions(-)target/arm/kvm_arm.h +0
-9@@ -344,16 +344,10 @@ int kvm_arm_set_irq(int cpu, int irqtype, int irq, int level);#else -static inline void kvm_arm_set_cpu_features_from_host (ARMCPU *cpu) -{ -/* -* This should never actually be called in the "not KVM" case, -* but set up the fields to indicate an error anyway. -*/ - cpu->kvm_target =QEMU_KVM_ARM_TARGET_NONE ; - cpu->host_cpu_probe_failed = true; -}
Quoted 8 lines
target/arm/kvm_arm.h int kvm_arm_set_irq(int cpu, int irqtype, int irq, int level); · line 351
Quoted 6 lines
target/arm/kvm_arm.h +4
-1- +/* +* It's safe to call these functions without KVM support. +* They should either do nothing or return "not supported". +*/ static inline void kvm_arm_add_vcpu_properties (Object *obj) {}this one also is guarded by
kvm_enabled()intarget/arm/cpu.cdon't you want to addg_assert_not_reached()?
Yes, that would make sense. I'll do that for v3.
Quoted 48 lines
Quoted 48 lines
target/arm/kvm_arm.h +23
-7static inline bool kvm_arm_aarch32_supported (void )@@ -371,23 +365,39 @@ static inline bool kvm_arm_sve_supported(void) return false; } +/* +* These functions should never actually be called without KVM support. +*/ +static inline void kvm_arm_set_cpu_features_from_host (ARMCPU *cpu) +{ +g_assert_not_reached (); +} +static inline int kvm_arm_get_max_vm_ipa_size (MachineState *ms) { -return -ENOENT ; +g_assert_not_reached (); }static inline int kvm_arm_vgic_probe (void ) { -return 0 ; +g_assert_not_reached (); } -static inline void kvm_arm_pmu_set_irq (CPUState *cs,int irq) {} -static inline void kvm_arm_pmu_init (CPUState *cs) {} +static inline void kvm_arm_pmu_set_irq (CPUState *cs,int irq) +{ +g_assert_not_reached (); +} -static inline void kvm_arm_sve_get_vls (CPUState *cs,unsigned long *map) {} +static inline void kvm_arm_pmu_init (CPUState *cs) +{ +g_assert_not_reached (); +} + +static inline void kvm_arm_sve_get_vls (CPUState *cs,unsigned long *map) +{ +g_assert_not_reached (); +} -static inline void kvm_arm_get_virtual_time (CPUState *cs) {} -static inline void kvm_arm_put_virtual_time (CPUState *cs) {}#endif
Quoted 5 lines
target/arm/kvm_arm.h static inline bool kvm_arm_sve_supported(void) · line 403
Quoted 2 lines
target/arm/kvm_arm.h +0
-0static inline const char *gic_class_name (void )Besides,
Reviewed-by Eric Auger <[email protected]>
Thanks,
drew
PATCH v2 3/5 hw/arm/virt: Move post cpu realize check into its own function
In reply to Andrew JonesWe'll add more to this new function in coming patches so we also state the gic must be created and call it below create_gic().
No functional change intended.
--- hw/arm/virt.c | 43 +++++++++++++++++++++++++++---------------- 1 file changed, 27 insertions(+), 16 deletions(-)
hw/arm/virt.c +27 -16
@@ -1672,6 +1672,31 @@ static void finalize_gic_version(VirtMachineState *vms) } } +/* +* virt_cpu_post_init() must be called after the CPUs have +* been realized and the GIC has been created. +*/ +static void virt_cpu_post_init (VirtMachineState *vms) +{ +bool aarch64; + + aarch64 =object_property_get_bool (OBJECT (first_cpu),"aarch64" ,NULL ); + +if (!kvm_enabled ()) { +if (aarch64 && vms->highmem) { +int requested_pa_size =64 -clz64 (vms->highest_gpa); +int pamax =arm_pamax (ARM_CPU (first_cpu)); + +if (pamax < requested_pa_size) { +error_report ("VCPU supports less PA bits (%d) than " +"requested by the memory map (%d)" , + pamax, requested_pa_size); +exit (1 ); + } + } + } +} +static void machvirt_init (MachineState *machine) {VirtMachineState *vms =VIRT_MACHINE (machine);
@@ -1886,22 +1911,6 @@ static void machvirt_init(MachineState *machine)fdt_add_timer_nodes (vms);fdt_add_cpu_nodes (vms); -if (!kvm_enabled ()) { -ARMCPU *cpu =ARM_CPU (first_cpu); -bool aarch64 =object_property_get_bool (OBJECT (cpu),"aarch64" ,NULL ); - -if (aarch64 && vms->highmem) { -int requested_pa_size, pamax =arm_pamax (cpu); - - requested_pa_size =64 -clz64 (vms->highest_gpa); -if (pamax < requested_pa_size) { -error_report ("VCPU supports less PA bits (%d) than requested " -"by the memory map (%d)" , pamax, requested_pa_size); -exit (1 ); - } - } - } -memory_region_add_subregion (sysmem, vms->memmap[VIRT_MEM ].base, machine->ram);if (machine->device_memory) {
@@ -1913,6 +1922,8 @@ static void machvirt_init(MachineState *machine)create_gic (vms); +virt_cpu_post_init (vms); +fdt_add_pmu_nodes (vms);create_uart (vms,VIRT_UART , sysmem,serial_hd (0 ));
Signature · 1 line
2.25.4
Re: [PATCH v2 3/5] hw/arm/virt: Move post cpu realize check into its own function
Hi Drew,
Quoted 7 lines · Andrew Jones
We'll add more to this new function in coming patches so we also state the gic must be created and call it below
create_gic().No functional change intended.
Signed-off-by Andrew Jones <[email protected]>Reviewed-by Peter Maydell <[email protected]>
Eric
Quoted 73 lines
--- hw/arm/virt.c | 43 +++++++++++++++++++++++++++---------------- 1 file changed, 27 insertions(+), 16 deletions(-)hw/arm/virt.c +27
-16@@ -1672,6 +1672,31 @@ static void finalize_gic_version(VirtMachineState *vms) } } +/* +* virt_cpu_post_init() must be called after the CPUs have +* been realized and the GIC has been created. +*/ +static void virt_cpu_post_init (VirtMachineState *vms) +{ +bool aarch64; + + aarch64 =object_property_get_bool (OBJECT (first_cpu),"aarch64" ,NULL ); + +if (!kvm_enabled ()) { +if (aarch64 && vms->highmem) { +int requested_pa_size =64 -clz64 (vms->highest_gpa); +int pamax =arm_pamax (ARM_CPU (first_cpu)); + +if (pamax < requested_pa_size) { +error_report ("VCPU supports less PA bits (%d) than " +"requested by the memory map (%d)" , + pamax, requested_pa_size); +exit (1 ); + } + } + } +} +static void machvirt_init (MachineState *machine) {VirtMachineState *vms =VIRT_MACHINE (machine);@@ -1886,22 +1911,6 @@ static void machvirt_init(MachineState *machine)fdt_add_timer_nodes (vms);fdt_add_cpu_nodes (vms); -if (!kvm_enabled ()) { -ARMCPU *cpu =ARM_CPU (first_cpu); -bool aarch64 =object_property_get_bool (OBJECT (cpu),"aarch64" ,NULL ); - -if (aarch64 && vms->highmem) { -int requested_pa_size, pamax =arm_pamax (cpu); - - requested_pa_size =64 -clz64 (vms->highest_gpa); -if (pamax < requested_pa_size) { -error_report ("VCPU supports less PA bits (%d) than requested " -"by the memory map (%d)" , pamax, requested_pa_size); -exit (1 ); - } - } - } -memory_region_add_subregion (sysmem, vms->memmap[VIRT_MEM ].base, machine->ram);if (machine->device_memory) {@@ -1913,6 +1922,8 @@ static void machvirt_init(MachineState *machine)create_gic (vms); +virt_cpu_post_init (vms); +fdt_add_pmu_nodes (vms);create_uart (vms,VIRT_UART , sysmem,serial_hd (0 ));
PATCH v2 4/5 hw/arm/virt: Move kvm pmu setup to virt_cpu_post_init
In reply to Andrew JonesMove the KVM PMU setup part of fdt_add_pmu_nodes() to virt_cpu_post_init(), which is a more appropriate location. Now fdt_add_pmu_nodes() is also named more appropriately, because it no longer does anything but fdt node creation.
No functional change intended.
--- hw/arm/virt.c | 34 ++++++++++++++++++---------------- 1 file changed, 18 insertions(+), 16 deletions(-)
hw/arm/virt.c +18 -16
@@ -521,21 +521,12 @@ static void fdt_add_gic_node(VirtMachineState *vms)static void fdt_add_pmu_nodes (const VirtMachineState *vms) { -CPUState *cpu; -ARMCPU *armcpu; +ARMCPU *armcpu =ARM_CPU (first_cpu);uint32_t irqflags =GIC_FDT_IRQ_FLAGS_LEVEL_HI ; -CPU_FOREACH (cpu) { - armcpu =ARM_CPU (cpu); -if (!arm_feature (&armcpu->env,ARM_FEATURE_PMU )) { -return ; - } -if (kvm_enabled ()) { -if (kvm_irqchip_in_kernel ()) { -kvm_arm_pmu_set_irq (cpu,PPI (VIRTUAL_PMU_IRQ )); - } -kvm_arm_pmu_init (cpu); - } +if (!arm_feature (&armcpu->env,ARM_FEATURE_PMU )) { +assert (!object_property_get_bool (OBJECT (armcpu),"pmu" ,NULL )); +return ; }if (vms->gic_version ==VIRT_GIC_VERSION_2 ) {
@@ -544,7 +535,6 @@ static void fdt_add_pmu_nodes(const VirtMachineState *vms) (1 << vms->smp_cpus) - 1); } - armcpu =ARM_CPU (qemu_get_cpu (0 ));qemu_fdt_add_subnode (vms->fdt,"/pmu" );if (arm_feature (&armcpu->env,ARM_FEATURE_V8 )) {const char compat[] ="arm,armv8-pmuv3" ;
@@ -1678,11 +1668,23 @@ static void finalize_gic_version(VirtMachineState *vms)*/ static void virt_cpu_post_init (VirtMachineState *vms) { -bool aarch64; +bool aarch64, pmu; +CPUState *cpu; aarch64 =object_property_get_bool (OBJECT (first_cpu),"aarch64" ,NULL ); + pmu =object_property_get_bool (OBJECT (first_cpu),"pmu" ,NULL ); -if (!kvm_enabled ()) { +if (kvm_enabled ()) { +CPU_FOREACH (cpu) { +if (pmu) { +assert (arm_feature (&ARM_CPU (cpu)->env,ARM_FEATURE_PMU )); +if (kvm_irqchip_in_kernel ()) { +kvm_arm_pmu_set_irq (cpu,PPI (VIRTUAL_PMU_IRQ )); + } +kvm_arm_pmu_init (cpu); + } + } + }else {if (aarch64 && vms->highmem) {int requested_pa_size =64 -clz64 (vms->highest_gpa);int pamax =arm_pamax (ARM_CPU (first_cpu));
Signature · 1 line
2.25.4
Re: [PATCH v2 4/5] hw/arm/virt: Move kvm pmu setup to virt_cpu_post_init
Hi Drew,
Quoted 28 lines · Andrew Jones
Move the KVM PMU setup part of
fdt_add_pmu_nodes()tovirt_cpu_post_init(), which is a more appropriate location. Nowfdt_add_pmu_nodes()is also named more appropriately, because it no longer does anything but fdt node creation.No functional change intended.
Signed-off-by Andrew Jones <[email protected]>--- hw/arm/virt.c | 34 ++++++++++++++++++---------------- 1 file changed, 18 insertions(+), 16 deletions(-)hw/arm/virt.c +1
-5@@ -521,21 +521,12 @@ static void fdt_add_gic_node(VirtMachineState *vms)static void fdt_add_pmu_nodes (const VirtMachineState *vms) { -CPUState *cpu; -ARMCPU *armcpu; +ARMCPU *armcpu =ARM_CPU (first_cpu);uint32_t irqflags =GIC_FDT_IRQ_FLAGS_LEVEL_HI ; -CPU_FOREACH (cpu) { - armcpu =ARM_CPU (cpu); -if (!arm_feature (&armcpu->env,ARM_FEATURE_PMU )) {
hw/arm/virt.c static void fdt_add_gic_node(VirtMachineState *vms) · line 528
Quoted 10 lines
hw/arm/virt.c +2
-8-return ; - } -if (kvm_enabled ()) { -if (kvm_irqchip_in_kernel ()) { -kvm_arm_pmu_set_irq (cpu,PPI (VIRTUAL_PMU_IRQ )); - } -kvm_arm_pmu_init (cpu); - } +if (!arm_feature (&armcpu->env,ARM_FEATURE_PMU )) { +assert (!object_property_get_bool (OBJECT (armcpu),"pmu" ,NULL ));
I don't rget the relevance of the assert. If the PMU is set, isn't is the consequence of arm_set_pmu?
Quoted 18 lines
hw/arm/virt.c +2
-2+return ; }if (vms->gic_version ==VIRT_GIC_VERSION_2 ) {@@ -544,7 +535,6 @@ static void fdt_add_pmu_nodes(const VirtMachineState *vms) (1 << vms->smp_cpus) - 1); } - armcpu =ARM_CPU (qemu_get_cpu (0 ));qemu_fdt_add_subnode (vms->fdt,"/pmu" );if (arm_feature (&armcpu->env,ARM_FEATURE_V8 )) {const char compat[] ="arm,armv8-pmuv3" ;@@ -1678,11 +1668,23 @@ static void finalize_gic_version(VirtMachineState *vms)*/ static void virt_cpu_post_init (VirtMachineState *vms) { -bool aarch64; +bool aarch64, pmu;
hw/arm/virt.c static void finalize_gic_version(VirtMachineState *vms) · line 1680
Quoted 10 lines
hw/arm/virt.c +6
-1+CPUState *cpu; aarch64 =object_property_get_bool (OBJECT (first_cpu),"aarch64" ,NULL ); + pmu =object_property_get_bool (OBJECT (first_cpu),"pmu" ,NULL ); -if (!kvm_enabled ()) { +if (kvm_enabled ()) { +CPU_FOREACH (cpu) { +if (pmu) { +assert (arm_feature (&ARM_CPU (cpu)->env,ARM_FEATURE_PMU ));
same here?
hw/arm/virt.c static void finalize_gic_version(VirtMachineState *vms) · line 1690
Quoted 11 lines
hw/arm/virt.c +7
-0+if (kvm_irqchip_in_kernel ()) { +kvm_arm_pmu_set_irq (cpu,PPI (VIRTUAL_PMU_IRQ )); + } +kvm_arm_pmu_init (cpu); + } + } + }else {if (aarch64 && vms->highmem) {int requested_pa_size =64 -clz64 (vms->highest_gpa);int pamax =arm_pamax (ARM_CPU (first_cpu));
Thanks
Eric
Re: [PATCH v2 4/5] hw/arm/virt: Move kvm pmu setup to virt_cpu_post_init
Quoted 27 lines · Auger Eric
Hi Drew,
Quoted 25 lines · Andrew Jones
Move the KVM PMU setup part of
fdt_add_pmu_nodes()tovirt_cpu_post_init(), which is a more appropriate location. Nowfdt_add_pmu_nodes()is also named more appropriately, because it no longer does anything but fdt node creation.No functional change intended.
Signed-off-by Andrew Jones <[email protected]>--- hw/arm/virt.c | 34 ++++++++++++++++++---------------- 1 file changed, 18 insertions(+), 16 deletions(-)hw/arm/virt.c +1
-2@@ -521,21 +521,12 @@ static void fdt_add_gic_node(VirtMachineState *vms)static void fdt_add_pmu_nodes (const VirtMachineState *vms) { -CPUState *cpu; -ARMCPU *armcpu; +ARMCPU *armcpu =ARM_CPU (first_cpu);uint32_t irqflags =GIC_FDT_IRQ_FLAGS_LEVEL_HI ;
Quoted 15 lines
hw/arm/virt.c static void fdt_add_gic_node(VirtMachineState *vms) · line 528
Quoted 13 lines
hw/arm/virt.c +2
-11-CPU_FOREACH (cpu) { - armcpu =ARM_CPU (cpu); -if (!arm_feature (&armcpu->env,ARM_FEATURE_PMU )) { -return ; - } -if (kvm_enabled ()) { -if (kvm_irqchip_in_kernel ()) { -kvm_arm_pmu_set_irq (cpu,PPI (VIRTUAL_PMU_IRQ )); - } -kvm_arm_pmu_init (cpu); - } +if (!arm_feature (&armcpu->env,ARM_FEATURE_PMU )) { +assert (!object_property_get_bool (OBJECT (armcpu),"pmu" ,NULL ));I don't rget the relevance of the assert. If the PMU is set, isn't is the consequence of
arm_set_pmu?
It's just defensive coding to ensure the property matches the feature flag.
Quoted 23 lines
Quoted 23 lines
hw/arm/virt.c +4
-2+return ; }if (vms->gic_version ==VIRT_GIC_VERSION_2 ) {@@ -544,7 +535,6 @@ static void fdt_add_pmu_nodes(const VirtMachineState *vms) (1 << vms->smp_cpus) - 1); } - armcpu =ARM_CPU (qemu_get_cpu (0 ));qemu_fdt_add_subnode (vms->fdt,"/pmu" );if (arm_feature (&armcpu->env,ARM_FEATURE_V8 )) {const char compat[] ="arm,armv8-pmuv3" ;@@ -1678,11 +1668,23 @@ static void finalize_gic_version(VirtMachineState *vms)*/ static void virt_cpu_post_init (VirtMachineState *vms) { -bool aarch64; +bool aarch64, pmu; +CPUState *cpu; aarch64 =object_property_get_bool (OBJECT (first_cpu),"aarch64" ,NULL ); + pmu =object_property_get_bool (OBJECT (first_cpu),"pmu" ,NULL );
Quoted 6 lines
hw/arm/virt.c static void finalize_gic_version(VirtMachineState *vms) · line 1680
Quoted 5 lines
hw/arm/virt.c +4
-1-if (!kvm_enabled ()) { +if (kvm_enabled ()) { +CPU_FOREACH (cpu) { +if (pmu) { +assert (arm_feature (&ARM_CPU (cpu)->env,ARM_FEATURE_PMU ));same here?
It's the same defensive check. Actually the check in fdt_add_pmu_nodes() can definitely be removed, since this check will have already caught anything before fdt_add_pmu_nodes() can run. We could probably just remove both though.
Quoted 11 lines
hw/arm/virt.c static void finalize_gic_version(VirtMachineState *vms) · line 1690
Quoted 11 lines
hw/arm/virt.c +7
-0+if (kvm_irqchip_in_kernel ()) { +kvm_arm_pmu_set_irq (cpu,PPI (VIRTUAL_PMU_IRQ )); + } +kvm_arm_pmu_init (cpu); + } + } + }else {if (aarch64 && vms->highmem) {int requested_pa_size =64 -clz64 (vms->highest_gpa);int pamax =arm_pamax (ARM_CPU (first_cpu));
Quoted 3 lines
Thanks
Eric
Thanks,
drew
Re: [PATCH v2 4/5] hw/arm/virt: Move kvm pmu setup to virt_cpu_post_init
In reply to Andrew JonesQuoted 9 lines · Andrew Jones
Move the KVM PMU setup part of
fdt_add_pmu_nodes()tovirt_cpu_post_init(), which is a more appropriate location. Nowfdt_add_pmu_nodes()is also named more appropriately, because it no longer does anything but fdt node creation.No functional change intended.
Signed-off-by Andrew Jones <[email protected]>
thanks
-- PMM
PATCH v2 5/5 hw/arm/virt: Implement kvm-steal-time
In reply to Andrew JonesWe add the kvm-steal-time CPU property and implement it for machvirt. A tiny bit of refactoring was also done to allow pmu and pvtime to use the same vcpu device helper functions.
--- docs/system/arm/cpu-features.rst | 11 +++++ hw/arm/virt.c | 43 ++++++++++++++++-- include/hw/arm/virt.h | 5 +++ target/arm/cpu.c | 10 +++++ target/arm/cpu.h | 4 ++ target/arm/kvm.c | 20 +++++++++ target/arm/kvm32.c | 5 +++ target/arm/kvm64.c | 77 +++++++++++++++++++++++++++++--- target/arm/kvm_arm.h | 30 +++++++++++++ target/arm/monitor.c | 2 +- tests/qtest/arm-cpu-features.c | 25 +++++++++-- 11 files changed, 219 insertions(+), 13 deletions(-)
docs/system/arm/cpu-features.rst +11 -0
@@ -200,6 +200,17 @@ the list of KVM VCPU features and their descriptions. adjustment, also restoring the legacy (pre-5.0) behavior. + kvm-steal-time Since v5.2, kvm-steal-time is enabled by + default when KVM is enabled, the feature is + supported, and the guest is 64-bit. + + When kvm-steal-time is enabled a 64-bit guest + can account for time its CPUs were not running + due to the host not scheduling the corresponding + VCPU threads. The accounting statistics may + influence the guest scheduler behavior and/or be + exposed to the guest userspace. + SVE CPU Properties ==================
hw/arm/virt.c +40 -3
88 lines not on this page · raw message
include/hw/arm/virt.h +5 -0
@@ -53,6 +53,9 @@#define PPI (irq) ((irq) + 16) +/* See Linux kernel arch/arm64/include/asm/pvclock-abi.h */ +#define PVTIME_SIZE_PER_CPU 64 +enum {VIRT_FLASH ,VIRT_MEM ,
@@ -80,6 +83,7 @@ enum {VIRT_PCDIMM_ACPI ,VIRT_ACPI_GED ,VIRT_NVDIMM_ACPI , +VIRT_PVTIME , VIRT_LOWMEMMAP_LAST, };
@@ -126,6 +130,7 @@ typedef struct {bool no_ged;/* Machines < 4.2 has no support for ACPI GED device */ bool kvm_no_adjvtime;bool acpi_expose_flash; +bool no_kvm_steal_time; } VirtMachineClass; typedef struct {
target/arm/cpu.c +10 -0
@@ -1308,6 +1308,16 @@ void arm_cpu_finalize_features(ARMCPU *cpu, Error **errp)return ; } } + +if (kvm_enabled ()) { +#ifdef TARGET_AARCH64 +kvm_arm_steal_time_finalize (cpu, &local_err); +if (local_err !=NULL ) { +error_propagate (errp, local_err); +return ; + } +#endif + } }static void arm_cpu_realizefn (DeviceState *dev,Error **errp)
target/arm/cpu.h +4 -0
@@ -24,6 +24,7 @@#include "hw/registerfields.h" #include "cpu-qom.h" #include "exec/cpu-defs.h" +#include "qapi/qapi-types-common.h" /* ARM processors have a weak memory model */ #define TCG_GUEST_DEFAULT_MO (0)
@@ -859,6 +860,9 @@ struct ARMCPU {bool kvm_vtime_dirty;uint64_t kvm_vtime; +/* KVM steal time */ +OnOffAuto kvm_steal_time; +/* Uniprocessor system with MP extensions */ bool mp_is_up;
target/arm/kvm.c +20 -0
@@ -192,6 +192,18 @@ static void kvm_no_adjvtime_set(Object *obj, bool value, Error **errp)ARM_CPU (obj)->kvm_adjvtime = !value; } +#ifdef TARGET_AARCH64 +static bool kvm_steal_time_get (Object *obj,Error **errp) +{ +return ARM_CPU (obj)->kvm_steal_time !=ON_OFF_AUTO_OFF ; +} + +static void kvm_steal_time_set (Object *obj,bool value,Error **errp) +{ +ARM_CPU (obj)->kvm_steal_time = value ?ON_OFF_AUTO_ON :ON_OFF_AUTO_OFF ; +} +#endif +/* KVM VCPU properties should be prefixed with "kvm-". */ void kvm_arm_add_vcpu_properties (Object *obj) {
@@ -207,6 +219,14 @@ void kvm_arm_add_vcpu_properties(Object *obj)"the virtual counter. VM stopped time " "will be counted."); } + +#ifdef TARGET_AARCH64 + cpu->kvm_steal_time =ON_OFF_AUTO_AUTO ; +object_property_add_bool (obj,"kvm-steal-time" , kvm_steal_time_get, + kvm_steal_time_set); +object_property_set_description (obj,"kvm-steal-time" , +"Set off to disable KVM steal time." ); +#endif }bool kvm_arm_pmu_supported (void )
target/arm/kvm32.c +5 -0
@@ -560,6 +560,11 @@ void kvm_arm_pmu_init(CPUState *cs)qemu_log_mask (LOG_UNIMP ,"%s: not implemented\n" , __func__); } +void kvm_arm_pvtime_init (CPUState *cs,uint64_t ipa) +{ +qemu_log_mask (LOG_UNIMP ,"%s: not implemented\n" , __func__); +} +#define ARM_REG_DFSR ARM_CP15_REG32(0, 5, 0, 0)#define ARM_REG_TTBCR ARM_CP15_REG32(0, 2, 0, 2)/*
target/arm/kvm64.c +72 -5
122 lines not on this page · raw message
target/arm/kvm_arm.h +30 -0
@@ -267,6 +267,16 @@ void kvm_arm_set_cpu_features_from_host(ARMCPU *cpu);*/ void kvm_arm_add_vcpu_properties (Object *obj); +/** +* kvm_arm_steal_time_finalize: +* @cpu: ARMCPU for which to finalize kvm-steal-time +* @errp: Pointer to Error* for error propagation +* +* Validate the kvm-steal-time property selection and set its default +* based on KVM support and guest configuration. +*/ +void kvm_arm_steal_time_finalize (ARMCPU *cpu,Error **errp); +/** * kvm_arm_aarch32_supported: *
@@ -340,6 +350,16 @@ int kvm_arm_vgic_probe(void);void kvm_arm_pmu_set_irq (CPUState *cs,int irq);void kvm_arm_pmu_init (CPUState *cs); + +/** +* kvm_arm_pvtime_init: +* @cs: CPUState +* @ipa: Per-vcpu guest physical base address of the pvtime structures +* +* Initializes PVTIME for the VCPU, setting the PVTIME IPA to @ipa. +*/ +void kvm_arm_pvtime_init (CPUState *cs,uint64_t ipa); +int kvm_arm_set_irq (int cpu,int irqtype,int irq,int level);#else
@@ -393,6 +413,16 @@ static inline void kvm_arm_pmu_init(CPUState *cs)g_assert_not_reached (); } +static inline void kvm_arm_pvtime_init (CPUState *cs,uint64_t ipa) +{ +g_assert_not_reached (); +} + +static inline void kvm_arm_steal_time_finalize (ARMCPU *cpu,Error **errp) +{ +g_assert_not_reached (); +} +static inline void kvm_arm_sve_get_vls (CPUState *cs,unsigned long *map) {g_assert_not_reached ();
target/arm/monitor.c +1 -1
@@ -103,7 +103,7 @@ static const char *cpu_model_advertised_features[] = {"sve128" ,"sve256" ,"sve384" ,"sve512" ,"sve640" ,"sve768" ,"sve896" ,"sve1024" ,"sve1152" ,"sve1280" ,"sve1408" ,"sve1536" ,"sve1664" ,"sve1792" ,"sve1920" ,"sve2048" , -"kvm-no-adjvtime" , +"kvm-no-adjvtime" ,"kvm-steal-time" ,NULL };
tests/qtest/arm-cpu-features.c +21 -4
@@ -452,6 +452,7 @@ static void test_query_cpu_model_expansion(const void *data)assert_set_feature (qts,"max" ,"pmu" , true);assert_has_not_feature (qts,"max" ,"kvm-no-adjvtime" ); +assert_has_not_feature (qts,"max" ,"kvm-steal-time" );if (g_str_equal (qtest_get_arch (),"aarch64" )) {assert_has_feature_enabled (qts,"max" ,"aarch64" );
@@ -493,6 +494,7 @@ static void test_query_cpu_model_expansion_kvm(const void *data)assert_set_feature (qts,"host" ,"kvm-no-adjvtime" , false);if (g_str_equal (qtest_get_arch (),"aarch64" )) { +bool kvm_supports_steal_time;bool kvm_supports_sve;char max_name[8 ], name[8 ];uint32_t max_vq, vq;
@@ -500,6 +502,10 @@ static void test_query_cpu_model_expansion_kvm(const void *data)QDict *resp;char *error; +assert_error (qts,"cortex-a15" , +"We cannot guarantee the CPU type 'cortex-a15' works " +"with KVM on this host" ,NULL ); +assert_has_feature_enabled (qts,"host" ,"aarch64" );/* Enabling and disabling pmu should always work. */
@@ -507,16 +513,26 @@ static void test_query_cpu_model_expansion_kvm(const void *data)assert_set_feature (qts,"host" ,"pmu" , false);assert_set_feature (qts,"host" ,"pmu" , true); -assert_error (qts,"cortex-a15" , -"We cannot guarantee the CPU type 'cortex-a15' works " -"with KVM on this host" ,NULL ); - +/* +* Some features would be enabled by default, but they're disabled +* because this instance of KVM doesn't support them. Test that the +* features are present, and, when enabled, issue further tests. +*/ +assert_has_feature (qts,"host" ,"kvm-steal-time" );assert_has_feature (qts,"host" ,"sve" ); + resp =do_query_no_props (qts,"host" ); + kvm_supports_steal_time =resp_get_feature (resp,"kvm-steal-time" ); kvm_supports_sve =resp_get_feature (resp,"sve" ); vls =resp_get_sve_vls (resp);qobject_unref (resp); +if (kvm_supports_steal_time) { +/* If we have steal-time then we should be able to toggle it. */ +assert_set_feature (qts,"host" ,"kvm-steal-time" , false); +assert_set_feature (qts,"host" ,"kvm-steal-time" , true); + } +if (kvm_supports_sve) {g_assert (vls !=0 ); max_vq =64 -__builtin_clzll (vls);
@@ -577,6 +593,7 @@ static void test_query_cpu_model_expansion_kvm(const void *data)assert_has_not_feature (qts,"host" ,"aarch64" );assert_has_not_feature (qts,"host" ,"pmu" );assert_has_not_feature (qts,"host" ,"sve" ); +assert_has_not_feature (qts,"host" ,"kvm-steal-time" ); }qtest_quit (qts);
Signature · 1 line
2.25.4
Re: [PATCH v2 5/5] hw/arm/virt: Implement kvm-steal-time
Drew,
Quoted 528 lines · Andrew Jones
We add the kvm-steal-time CPU property and implement it for machvirt. A tiny bit of refactoring was also done to allow pmu and pvtime to use the same vcpu device helper functions.
Signed-off-by Andrew Jones <[email protected]>--- docs/system/arm/cpu-features.rst | 11 +++++ hw/arm/virt.c | 43 ++++++++++++++++-- include/hw/arm/virt.h | 5 +++ target/arm/cpu.c | 10 +++++ target/arm/cpu.h | 4 ++ target/arm/kvm.c | 20 +++++++++ target/arm/kvm32.c | 5 +++ target/arm/kvm64.c | 77 +++++++++++++++++++++++++++++--- target/arm/kvm_arm.h | 30 +++++++++++++ target/arm/monitor.c | 2 +- tests/qtest/arm-cpu-features.c | 25 +++++++++-- 11 files changed, 219 insertions(+), 13 deletions(-)docs/system/arm/cpu-features.rst +11
-0@@ -200,6 +200,17 @@ the list of KVM VCPU features and their descriptions. adjustment, also restoring the legacy (pre-5.0) behavior. + kvm-steal-time Since v5.2, kvm-steal-time is enabled by + default when KVM is enabled, the feature is + supported, and the guest is 64-bit. + + When kvm-steal-time is enabled a 64-bit guest + can account for time its CPUs were not running + due to the host not scheduling the corresponding + VCPU threads. The accounting statistics may + influence the guest scheduler behavior and/or be + exposed to the guest userspace. + SVE CPU Properties ==================hw/arm/virt.c +39
-3@@ -151,6 +151,7 @@ static const MemMapEntry base_memmap[] = { [VIRT_PCDIMM_ACPI] = { 0x09070000, MEMORY_HOTPLUG_IO_LEN }, [VIRT_ACPI_GED] = { 0x09080000, ACPI_GED_EVT_SEL_LEN }, [VIRT_NVDIMM_ACPI] = { 0x09090000, NVDIMM_ACPI_IO_LEN}, + [VIRT_PVTIME] = { 0x090a0000, 0x00010000 }, [VIRT_MMIO] = { 0x0a000000, 0x00000200 }, /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */ [VIRT_PLATFORM_BUS] = { 0x0c000000, 0x02000000 },@@ -1666,15 +1667,39 @@ static void finalize_gic_version(VirtMachineState *vms)* virt_cpu_post_init() must be called after the CPUs have * been realized and the GIC has been created. */ -static void virt_cpu_post_init (VirtMachineState *vms) +static void virt_cpu_post_init (VirtMachineState *vms,int max_cpus, +MemoryRegion *sysmem) { -bool aarch64, pmu; +bool aarch64, pmu, steal_time;CPUState *cpu; aarch64 =object_property_get_bool (OBJECT (first_cpu),"aarch64" ,NULL ); pmu =object_property_get_bool (OBJECT (first_cpu),"pmu" ,NULL ); + steal_time =object_property_get_bool (OBJECT (first_cpu), +"kvm-steal-time" ,NULL ); if (kvm_enabled()) {> + hwaddr pvtime_reg_base = vms->memmap[VIRT_PVTIME].base; +hwaddr pvtime_reg_size = vms->memmap[VIRT_PVTIME ].size; + +if (steal_time) { +MemoryRegion *pvtime =g_new (MemoryRegion,1 ); +hwaddr pvtime_size = max_cpus *PVTIME_SIZE_PER_CPU ; + +/* The memory region size must be a multiple of host page size. */ + pvtime_size =REAL_HOST_PAGE_ALIGN (pvtime_size); + +if (pvtime_size > pvtime_reg_size) { +error_report ("pvtime requires a %ld byte memory region for " +"%d CPUs, but only %ld has been reserved" , + pvtime_size, max_cpus, pvtime_reg_size); +exit (1 ); + } + +memory_region_init_ram (pvtime,NULL ,"pvtime" , pvtime_size,NULL ); +memory_region_add_subregion (sysmem, pvtime_reg_base, pvtime); + } +CPU_FOREACH (cpu) {if (pmu) {assert (arm_feature (&ARM_CPU (cpu)->env,ARM_FEATURE_PMU ));@@ -1683,6 +1708,10 @@ static void virt_cpu_post_init(VirtMachineState *vms) }kvm_arm_pmu_init (cpu); } +if (steal_time) { +kvm_arm_pvtime_init (cpu, pvtime_reg_base + + cpu->cpu_index *PVTIME_SIZE_PER_CPU ); + } } }else {if (aarch64 && vms->highmem) {@@ -1853,6 +1882,11 @@ static void machvirt_init(MachineState *machine)object_property_set_bool (cpuobj,"kvm-no-adjvtime" , true,NULL ); } +if (vmc->no_kvm_steal_time && +object_property_find (cpuobj,"kvm-steal-time" ,NULL )) { +object_property_set_bool (cpuobj,"kvm-steal-time" , false,NULL ); + } +if (vmc->no_pmu &&object_property_find (cpuobj,"pmu" ,NULL )) {object_property_set_bool (cpuobj,"pmu" , false,NULL ); }@@ -1924,7 +1958,7 @@ static void machvirt_init(MachineState *machine)create_gic (vms); -virt_cpu_post_init (vms); +virt_cpu_post_init (vms, possible_cpus->len, sysmem);fdt_add_pmu_nodes (vms);@@ -2566,8 +2600,11 @@ DEFINE_VIRT_MACHINE_AS_LATEST(5, 2)static void virt_machine_5_1_options (MachineClass *mc) { +VirtMachineClass *vmc =VIRT_MACHINE_CLASS (OBJECT_CLASS (mc)); +virt_machine_5_2_options (mc);compat_props_add (mc->compat_props, hw_compat_5_1, hw_compat_5_1_len); + vmc->no_kvm_steal_time = true; }DEFINE_VIRT_MACHINE (5 ,1 )include/hw/arm/virt.h +5
-0@@ -53,6 +53,9 @@#define PPI (irq) ((irq) + 16) +/* See Linux kernel arch/arm64/include/asm/pvclock-abi.h */ +#define PVTIME_SIZE_PER_CPU 64 +enum {VIRT_FLASH ,VIRT_MEM ,@@ -80,6 +83,7 @@ enum {VIRT_PCDIMM_ACPI ,VIRT_ACPI_GED ,VIRT_NVDIMM_ACPI , +VIRT_PVTIME , VIRT_LOWMEMMAP_LAST, };@@ -126,6 +130,7 @@ typedef struct {bool no_ged;/* Machines < 4.2 has no support for ACPI GED device */ bool kvm_no_adjvtime;bool acpi_expose_flash; +bool no_kvm_steal_time; } VirtMachineClass; typedef struct {target/arm/cpu.c +10
-0@@ -1308,6 +1308,16 @@ void arm_cpu_finalize_features(ARMCPU *cpu, Error **errp)return ; } } + +if (kvm_enabled ()) { +#ifdef TARGET_AARCH64 +kvm_arm_steal_time_finalize (cpu, &local_err); +if (local_err !=NULL ) { +error_propagate (errp, local_err); +return ; + } +#endif + } }static void arm_cpu_realizefn (DeviceState *dev,Error **errp)target/arm/cpu.h +4
-0@@ -24,6 +24,7 @@#include "hw/registerfields.h" #include "cpu-qom.h" #include "exec/cpu-defs.h" +#include "qapi/qapi-types-common.h" /* ARM processors have a weak memory model */ #define TCG_GUEST_DEFAULT_MO (0)@@ -859,6 +860,9 @@ struct ARMCPU {bool kvm_vtime_dirty;uint64_t kvm_vtime; +/* KVM steal time */ +OnOffAuto kvm_steal_time; +/* Uniprocessor system with MP extensions */ bool mp_is_up;target/arm/kvm.c +20
-0@@ -192,6 +192,18 @@ static void kvm_no_adjvtime_set(Object *obj, bool value, Error **errp)ARM_CPU (obj)->kvm_adjvtime = !value; } +#ifdef TARGET_AARCH64 +static bool kvm_steal_time_get (Object *obj,Error **errp) +{ +return ARM_CPU (obj)->kvm_steal_time !=ON_OFF_AUTO_OFF ; +} + +static void kvm_steal_time_set (Object *obj,bool value,Error **errp) +{ +ARM_CPU (obj)->kvm_steal_time = value ?ON_OFF_AUTO_ON :ON_OFF_AUTO_OFF ; +} +#endif +/* KVM VCPU properties should be prefixed with "kvm-". */ void kvm_arm_add_vcpu_properties (Object *obj) {@@ -207,6 +219,14 @@ void kvm_arm_add_vcpu_properties(Object *obj)"the virtual counter. VM stopped time " "will be counted."); } + +#ifdef TARGET_AARCH64 + cpu->kvm_steal_time =ON_OFF_AUTO_AUTO ; +object_property_add_bool (obj,"kvm-steal-time" , kvm_steal_time_get, + kvm_steal_time_set); +object_property_set_description (obj,"kvm-steal-time" , +"Set off to disable KVM steal time." ); +#endif }bool kvm_arm_pmu_supported (void )target/arm/kvm32.c +5
-0@@ -560,6 +560,11 @@ void kvm_arm_pmu_init(CPUState *cs)qemu_log_mask (LOG_UNIMP ,"%s: not implemented\n" , __func__); } +void kvm_arm_pvtime_init (CPUState *cs,uint64_t ipa) +{ +qemu_log_mask (LOG_UNIMP ,"%s: not implemented\n" , __func__); +} +#define ARM_REG_DFSR ARM_CP15_REG32(0, 5, 0, 0)#define ARM_REG_TTBCR ARM_CP15_REG32(0, 2, 0, 2)/* target/arm/kvm64.c +72
-5@@ -17,6 +17,7 @@#include <linux/kvm.h> #include "qemu-common.h" +#include "qapi/error.h" #include "cpu.h" #include "qemu/timer.h" #include "qemu/error-report.h" @@ -398,19 +399,20 @@ static CPUWatchpoint *find_hw_watchpoint(CPUState *cpu, target_ulong addr)return NULL ; } -static bool kvm_arm_pmu_set_attr (CPUState *cs,struct kvm_device_attr *attr) +static bool kvm_arm_set_device_attr (CPUState *cs,struct kvm_device_attr *attr, +const char *name) {int err; err =kvm_vcpu_ioctl (cs,KVM_HAS_DEVICE_ATTR , attr);if (err !=0 ) { -error_report ("PMU: KVM_HAS_DEVICE_ATTR: %s" ,strerror (-err)); +error_report ("%s: KVM_HAS_DEVICE_ATTR: %s" , name,strerror (-err));return false; } err =kvm_vcpu_ioctl (cs,KVM_SET_DEVICE_ATTR , attr);if (err !=0 ) { -error_report ("PMU: KVM_SET_DEVICE_ATTR: %s" ,strerror (-err)); +error_report ("%s: KVM_SET_DEVICE_ATTR: %s" , name,strerror (-err));return false; }@@ -427,7 +429,7 @@ void kvm_arm_pmu_init(CPUState *cs)if (!ARM_CPU (cs)->has_pmu) {return ; } -if (!kvm_arm_pmu_set_attr (cs, &attr)) { +if (!kvm_arm_set_device_attr (cs, &attr,"PMU" )) {error_report ("failed to init PMU" );abort (); }@@ -444,12 +446,29 @@ void kvm_arm_pmu_set_irq(CPUState *cs, int irq)if (!ARM_CPU (cs)->has_pmu) {return ; } -if (!kvm_arm_pmu_set_attr (cs, &attr)) { +if (!kvm_arm_set_device_attr (cs, &attr,"PMU" )) {error_report ("failed to set irq for PMU" );abort (); } } +void kvm_arm_pvtime_init (CPUState *cs,uint64_t ipa) +{ +struct kvm_device_attr attr = { + .group =KVM_ARM_VCPU_PVTIME_CTRL , + .attr =KVM_ARM_VCPU_PVTIME_IPA , + .addr = (uint64_t )&ipa, + }; + +if (ARM_CPU (cs)->kvm_steal_time ==ON_OFF_AUTO_OFF ) { +return ; + } +if (!kvm_arm_set_device_attr (cs, &attr,"PVTIME IPA" )) { +error_report ("failed to init PVTIME IPA" ); +abort (); + } +} +static int read_sys_reg32 (int fd,uint32_t *pret,uint64_t id) {uint64_t ret;@@ -652,6 +671,54 @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf)return true; } +void kvm_arm_steal_time_finalize (ARMCPU *cpu,Error **errp) +{ +static bool has_steal_time; +static bool probed; +int fdarray[3 ]; + +if (!probed) { + probed = true; +if (kvm_check_extension (kvm_state,KVM_CAP_VCPU_ATTRIBUTES )) { +if (!kvm_arm_create_scratch_host_vcpu (NULL , fdarray,NULL )) { +error_report ("Failed to create scratch VCPU" ); +abort (); + } + + has_steal_time =kvm_device_check_attr (fdarray[2 ], +KVM_ARM_VCPU_PVTIME_CTRL , +KVM_ARM_VCPU_PVTIME_IPA ); + +kvm_arm_destroy_scratch_host_vcpu (fdarray); + } + } + +if (cpu->kvm_steal_time ==ON_OFF_AUTO_AUTO ) { +if (!has_steal_time || !arm_feature (&cpu->env,ARM_FEATURE_AARCH64 )) { + cpu->kvm_steal_time =ON_OFF_AUTO_OFF ; + }else { + cpu->kvm_steal_time =ON_OFF_AUTO_ON ; + } + }else if (cpu->kvm_steal_time ==ON_OFF_AUTO_ON ) { +if (!has_steal_time) { +error_setg (errp,"'kvm-steal-time' cannot be enabled " +"on this host" ); +return ; + }else if (!arm_feature (&cpu->env,ARM_FEATURE_AARCH64 )) { +/* +* DEN0057A chapter 2 says "This specification only covers +* systems in which the Execution state of the hypervisor +* as well as EL1 of virtual machines is AArch64.". And, +* to ensure that, the smc/hvc calls are only specified as +* smc64/hvc64. +*/ +error_setg (errp,"'kvm-steal-time' cannot be enabled " +"for AArch32 guests" ); +return ; + } + } +} +bool kvm_arm_aarch32_supported (void ) {return kvm_check_extension (kvm_state,KVM_CAP_ARM_EL1_32BIT );target/arm/kvm_arm.h +30
-0@@ -267,6 +267,16 @@ void kvm_arm_set_cpu_features_from_host(ARMCPU *cpu);*/ void kvm_arm_add_vcpu_properties (Object *obj); +/** +* kvm_arm_steal_time_finalize: +* @cpu: ARMCPU for which to finalize kvm-steal-time +* @errp: Pointer to Error* for error propagation +* +* Validate the kvm-steal-time property selection and set its default +* based on KVM support and guest configuration. +*/ +void kvm_arm_steal_time_finalize (ARMCPU *cpu,Error **errp); +/** * kvm_arm_aarch32_supported: * @@ -340,6 +350,16 @@ int kvm_arm_vgic_probe(void);void kvm_arm_pmu_set_irq (CPUState *cs,int irq);void kvm_arm_pmu_init (CPUState *cs); + +/** +* kvm_arm_pvtime_init: +* @cs: CPUState +* @ipa: Per-vcpu guest physical base address of the pvtime structures +* +* Initializes PVTIME for the VCPU, setting the PVTIME IPA to @ipa. +*/ +void kvm_arm_pvtime_init (CPUState *cs,uint64_t ipa); +int kvm_arm_set_irq (int cpu,int irqtype,int irq,int level);#else @@ -393,6 +413,16 @@ static inline void kvm_arm_pmu_init(CPUState *cs)g_assert_not_reached (); } +static inline void kvm_arm_pvtime_init (CPUState *cs,uint64_t ipa) +{ +g_assert_not_reached (); +} + +static inline void kvm_arm_steal_time_finalize (ARMCPU *cpu,Error **errp) +{ +g_assert_not_reached (); +} +static inline void kvm_arm_sve_get_vls (CPUState *cs,unsigned long *map) {g_assert_not_reached ();target/arm/monitor.c +1
-1@@ -103,7 +103,7 @@ static const char *cpu_model_advertised_features[] = {"sve128" ,"sve256" ,"sve384" ,"sve512" ,"sve640" ,"sve768" ,"sve896" ,"sve1024" ,"sve1152" ,"sve1280" ,"sve1408" ,"sve1536" ,"sve1664" ,"sve1792" ,"sve1920" ,"sve2048" , -"kvm-no-adjvtime" , +"kvm-no-adjvtime" ,"kvm-steal-time" ,NULL };tests/qtest/arm-cpu-features.c +20
-4@@ -452,6 +452,7 @@ static void test_query_cpu_model_expansion(const void *data)assert_set_feature (qts,"max" ,"pmu" , true);assert_has_not_feature (qts,"max" ,"kvm-no-adjvtime" ); +assert_has_not_feature (qts,"max" ,"kvm-steal-time" );if (g_str_equal (qtest_get_arch (),"aarch64" )) {assert_has_feature_enabled (qts,"max" ,"aarch64" );@@ -493,6 +494,7 @@ static void test_query_cpu_model_expansion_kvm(const void *data)assert_set_feature (qts,"host" ,"kvm-no-adjvtime" , false);if (g_str_equal (qtest_get_arch (),"aarch64" )) { +bool kvm_supports_steal_time;bool kvm_supports_sve;char max_name[8 ], name[8 ];uint32_t max_vq, vq;@@ -500,6 +502,10 @@ static void test_query_cpu_model_expansion_kvm(const void *data)QDict *resp;char *error; +assert_error (qts,"cortex-a15" , +"We cannot guarantee the CPU type 'cortex-a15' works " +"with KVM on this host" ,NULL ); +assert_has_feature_enabled (qts,"host" ,"aarch64" );/* Enabling and disabling pmu should always work. */ @@ -507,16 +513,26 @@ static void test_query_cpu_model_expansion_kvm(const void *data)assert_set_feature (qts,"host" ,"pmu" , false);assert_set_feature (qts,"host" ,"pmu" , true); -assert_error (qts,"cortex-a15" , -"We cannot guarantee the CPU type 'cortex-a15' works " -"with KVM on this host" ,NULL ); - +/* +* Some features would be enabled by default, but they're disabled +* because this instance of KVM doesn't support them. Test that the +* features are present, and, when enabled, issue further tests. +*/ +assert_has_feature (qts,"host" ,"kvm-steal-time" );assert_has_feature (qts,"host" ,"sve" ); + resp =do_query_no_props (qts,"host" ); + kvm_supports_steal_time =resp_get_feature (resp,"kvm-steal-time" ); kvm_supports_sve =resp_get_feature (resp,"sve" ); vls =resp_get_sve_vls (resp);qobject_unref (resp); +if (kvm_supports_steal_time) { +/* If we have steal-time then we should be able to toggle it. */ +assert_set_feature (qts,"host" ,"kvm-steal-time" , false); +assert_set_feature (qts,"host" ,"kvm-steal-time" , true); + } +if (kvm_supports_sve) {g_assert (vls !=0 ); max_vq =64 -__builtin_clzll (vls);
tests/qtest/arm-cpu-features.c static void test_query_cpu_model_expansion_kvm(const void *data) · line 599
Quoted 7 lines
tests/qtest/arm-cpu-features.c +1
-0@@ -577,6 +593,7 @@ static void test_query_cpu_model_expansion_kvm(const void *data)assert_has_not_feature (qts,"host" ,"aarch64" );assert_has_not_feature (qts,"host" ,"pmu" );assert_has_not_feature (qts,"host" ,"sve" ); +assert_has_not_feature (qts,"host" ,"kvm-steal-time" ); }qtest_quit (qts);
This looks good to me
Thanks
Eric
FYI, the new KVM cap is on its way into the kernel and Peter has submit patches to remove kvm32 from qemu. So I'll be refreshing this series to incorporate both those changes.
Thanks,
drew
Quoted 114 lines · Andrew Jones
v2:
- Changed the introduction of the feature to 5.2 from 5.1 (The 5.2 machine type patch posted by Cornelia was thrown in for completeness, but I suppose that'll get picked up separately.)
- Added a patch addingg_assert_not_reached()to many KVM stubs. (This isn't exactly related to the series, but the series does add two more stubs that can now be added in the same way.)
- Fixed a patch that wasn't suppose to have a functional change, but did (fdt_add_gic_node()shouldn't generate the node without the PMU) [Peter]
- Pass sysmem tovirt_cpu_post_init()[Peter]
- Introduced a define for the pvtime struct size
- Calculate the pvtime memory region size based on max-cpus and host-page-size [Beata]
- Renamedkvm_no_steal_timetono_kvm_steal_time[Peter]
- Fixed a parameter misordering withobject_property_set_bool()
- Added a comment explaining why the feature isn't supported for AArch32 guests
- Changed a !kvm_steal_time to akvm_steal_time==ON_OFF_AUTO_OFFas it should be
- Picked up one r-b from PeterKVM supports the ability to publish the amount of time that VCPUs were runnable, but not running due to other host threads running instead, to the guest. The guest scheduler may use that information when making decisions and the guest may expose it to its userspace (Linux publishes this information in
/proc/stat). This feature is called "steal time" as it represents the amount of time stolen from a guest by scheduling out its VCPUs. To enable this feature KVM userspace must provide a memory region that will be used to publish the information to the guest. The memory region is typical migratable region. The GPA of the region is given to KVM through a VCPU device ioctl interface. This feature is only available for 64-bit hosts running 64-bit guests.This series provides the QEMU support of this feature. It will be enabled by default for 5.2 machine types and later, but may be disabled with a new CPU property "kvm-steal-time".
While testing migration it was observed that the amount of steal time as viewed by the guest was getting reset on each migration. Patch 4/6 of a pvtime fix series posted[*] for KVM should fix that. Also, we may still want to change the way we probe KVM for the feature in this QEMU series to the new KVM cap proposed in that KVM series.
Migration testing:
* virt-5.1 can migrate as usual, no steal-time enabled
* virt-5.2 can migrate between hosts with steal-time enabled (the default) and disabled when both hosts support steal-time
* virt-5.2 with steal-time disabled can migrate to a host that does not support steal-time
* virt-5.2 with steal-time enabled will cleanly fail when migrating to a host that does not support steal-time
* virt-5.2 without the kvm-steal-time property specified can boot on a host that does not support the feature - the feature will be disabled. However, if the guest is migrated to a host that does support the feature, then after the guest has reboot the feature will become available with the guest kernel supports it (this is the nature of migrating guests that use '-cpu host'). Additionally, once this guest has been migrated to a host that does have the feature, then it will fail (cleanly) to migrate to a host that does not have the feature. If this behavior isn't desired, then the user should explicitly disable steal-time with the kvm-steal-time property if they want to boot a 5.2 guest on a host that doesn't support steal-time.
[*] https://lists.cs.columbia.edu/pipermail/kvmarm/2020-August/041823.html
Thanks,
drewAndrew Jones (4):
target/arm/kvm: Make uncalled stubs explicitly unreachable hw/arm/virt: Move post cpu realize check into its own function hw/arm/virt: Move kvm pmu setup tovirt_cpu_post_inithw/arm/virt: Implement kvm-steal-timeCornelia Huck (1):
hw: add compat machines for 5.2docs/system/arm/cpu-features.rst | 11 +++ hw/arm/virt.c | 119 +++++++++++++++++++++++-------- hw/core/machine.c | 3 + hw/i386/pc.c | 6 +- hw/i386/pc_piix.c | 14 +++- hw/i386/pc_q35.c | 13 +++- hw/ppc/spapr.c | 15 +++- hw/s390x/s390-virtio-ccw.c | 14 +++- include/hw/arm/virt.h | 5 ++ include/hw/boards.h | 3 + include/hw/i386/pc.h | 3 + target/arm/cpu.c | 10 +++ target/arm/cpu.h | 4 ++ target/arm/kvm.c | 20 ++++++ target/arm/kvm32.c | 5 ++ target/arm/kvm64.c | 77 ++++++++++++++++++-- target/arm/kvm_arm.h | 74 ++++++++++++++----- target/arm/monitor.c | 2 +- tests/qtest/arm-cpu-features.c | 25 +++++-- 19 files changed, 358 insertions(+), 65 deletions(-)Signature · 1 line
2.25.4