pm80xx : Updates for the driver version 0.1.39.
Subsystems (2)
v7 cover pm80xx : Updates for the driver version 0.1.39.
From: Deepak Ukey <[email protected]>
This patch set includes some bug fixes and features for pm80xx driver.
Changes from V6:
For "Staggered spin up support."
-Changed DECLARE_COMPLETION to DECLARE_COMPLETION_ONSTACK in pm8001_scan_start function.
Viswas G (2):
pm80xx : Support for get phy profile functionality. pm80xx : Staggered spin up support.
drivers/scsi/pm8001/pm8001_ctl.h | 33 ++++++ drivers/scsi/pm8001/pm8001_defs.h | 3 + drivers/scsi/pm8001/pm8001_hwi.c | 14 ++- drivers/scsi/pm8001/pm8001_init.c | 55 +++++++++- drivers/scsi/pm8001/pm8001_sas.c | 36 ++++++- drivers/scsi/pm8001/pm8001_sas.h | 18 ++++ drivers/scsi/pm8001/pm80xx_hwi.c | 213 ++++++++++++++++++++++++++++++++++---- drivers/scsi/pm8001/pm80xx_hwi.h | 2 + 8 files changed, 349 insertions(+), 25 deletions(-)
Signature · 1 line
2.16.3
PATCH v7 1/2 pm80xx : Support for get phy profile functionality.
From: Viswas G <[email protected]>
Added the support to get the phy profile which gives information about the phy states, port and errors on phy.
--- drivers/scsi/pm8001/pm8001_ctl.h | 33 +++++++++++++++ drivers/scsi/pm8001/pm8001_init.c | 2 + drivers/scsi/pm8001/pm8001_sas.h | 5 +++ drivers/scsi/pm8001/pm80xx_hwi.c | 88 ++++++++++++++++++++++++++++++++++++++- drivers/scsi/pm8001/pm80xx_hwi.h | 2 + 5 files changed, 128 insertions(+), 2 deletions(-)
drivers/scsi/pm8001/pm8001_ctl.h +33 -0
@@ -41,6 +41,39 @@#ifndef PM8001_CTL_H_INCLUDED #define PM8001_CTL_H_INCLUDED +#ifdef __LITTLE_ENDIAN_BITFIELD +struct phy_status { +char phy_id; +unsigned int phy_state:4 ; +unsigned int nlr:4 ; +unsigned int plr:4 ; +unsigned int reserved1:12 ; +unsigned char port_id; +unsigned int prts:4 ; +unsigned int reserved2:20 ; +} __packed; +#else +struct phy_status { +char phy_id; +unsigned int reserved1:12 ; +unsigned int plr:4 ; +unsigned int nlr:4 ; +unsigned int phy_state:4 ; +unsigned char port_id; +unsigned int reserved2:20 ; +unsigned int prts:4 ; +} __packed; +#endif + +struct phy_errcnt { +unsigned int InvalidDword; +unsigned int runningDisparityError; +unsigned int codeViolation; +unsigned int LossOfSyncDW; +unsigned int phyResetProblem; +unsigned int inboundCRCError; +}; +#define IOCTL_BUF_SIZE 4096#define HEADER_LEN 28#define SIZE_OFFSET 16
drivers/scsi/pm8001/pm8001_init.c +2 -0
@@ -398,6 +398,8 @@ static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha, pm8001_ha->ccb_info[i].task =NULL ; pm8001_ha->ccb_info[i].ccb_tag =0xffffffff ; pm8001_ha->ccb_info[i].device =NULL ; + pm8001_ha->ccb_info[i].completion =NULL ; + pm8001_ha->ccb_info[i].resp_buf =NULL ; ++pm8001_ha->tags_num; } pm8001_ha->flags =PM8001F_INIT_TIME ;
drivers/scsi/pm8001/pm8001_sas.h +5 -0
@@ -56,6 +56,7 @@#include <scsi/sas_ata.h> #include <linux/atomic.h> #include "pm8001_defs.h" +#include "pm8001_ctl.h" #define DRV_NAME "pm80xx"#define DRV_VERSION "0.1.39"
@@ -244,6 +245,8 @@ struct pm8001_dispatch {int (*sas_diag_execute_req)(struct pm8001_hba_info *pm8001_ha,u32 state);int (*sas_re_init_req)(struct pm8001_hba_info *pm8001_ha); +int (*get_phy_profile_req)(struct pm8001_hba_info *pm8001_ha, +int phy,int page,struct completion *comp,void *buf); };struct pm8001_chip_info {
@@ -318,6 +321,8 @@ struct pm8001_ccb_info {struct pm8001_prd buf_prd[PM8001_MAX_DMA_SG ];struct fw_control_ex *fw_control_context;u8 open_retry; +struct completion *completion; +void *resp_buf; };struct mpi_mem {
drivers/scsi/pm8001/pm80xx_hwi.c +86 -2
112 lines not on this page · raw message
drivers/scsi/pm8001/pm80xx_hwi.h +2 -0
@@ -175,7 +175,9 @@#define PHY_STOP_ERR_DEVICE_ATTACHED 0x1046/* phy_profile */ +#define SAS_PHY_ERR_COUNTERS_PAGE 0x01#define SAS_PHY_ANALOG_SETTINGS_PAGE 0x04 +#define SAS_PHY_GENERAL_STATUS_PAGE 0x05#define PHY_DWORD_LENGTH 0xC/* Thermal related */
Signature · 1 line
2.16.3
PATCH v7 2/2 pm80xx : Staggered spin up support.
In reply to Deepak UkeyFrom: Viswas G <[email protected]>
As a part of drive discovery, driver will initaite the drive spin up. If all drives do spin up together, it will result in large power consumption. To reduce the power consumption, driver provide an option to make a small group of drives (say 3 or 4 drives together) to do the spin up. The delay between two spin up group and no of drives to spin up (group) can be programmed by the customer in seeprom and driver will use it to control the spinup.
--- drivers/scsi/pm8001/pm8001_defs.h | 3 + drivers/scsi/pm8001/pm8001_hwi.c | 14 ++++- drivers/scsi/pm8001/pm8001_init.c | 53 +++++++++++++++- drivers/scsi/pm8001/pm8001_sas.c | 36 ++++++++++- drivers/scsi/pm8001/pm8001_sas.h | 13 ++++ drivers/scsi/pm8001/pm80xx_hwi.c | 125 +++++++++++++++++++++++++++++++++----- 6 files changed, 221 insertions(+), 23 deletions(-)
drivers/scsi/pm8001/pm8001_defs.h +3 -0
@@ -101,6 +101,9 @@ enum port_type {#define USI_MAX_MEMCNT (PI + PM8001_MAX_SPCV_OUTB_NUM)#define CONFIG_SCSI_PM8001_MAX_DMA_SG 528#define PM8001_MAX_DMA_SG CONFIG_SCSI_PM8001_MAX_DMA_SG +#define SPINUP_DELAY_OFFSET 0x890/* 0x890 - delay */ +#define SPINUP_GROUP_OFFSET 0x892/* 0x892 - group */ +#define PM80XX_MAX_SPINUP_DELAY 10000/* 10000 ms */ enum memory_region_num {AAP1 =0x0 ,/* application acceleration processor */ IOP ,/* IO processor */
drivers/scsi/pm8001/pm8001_hwi.c +12 -2
@@ -3237,7 +3237,7 @@ int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb) (struct local_phy_ctl_resp *)(piomb +4 );u32 status =le32_to_cpu (pPayload->status);u32 phy_id =le32_to_cpu (pPayload->phyop_phyid) &ID_BITS ; -u32 phy_op =le32_to_cpu (pPayload->phyop_phyid) &OP_BITS ; +u32 phy_op = (le32_to_cpu (pPayload->phyop_phyid) &OP_BITS ) >>8 ; tag =le32_to_cpu (pPayload->tag);if (status !=0 ) { PM8001_MSG_DBG(pm8001_ha,
@@ -3248,6 +3248,13 @@ int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)pm8001_printk ("%x phy execute %x phy op success!\n" , phy_id, phy_op)); pm8001_ha->phy[phy_id].reset_success = true; +if (phy_op ==PHY_NOTIFY_ENABLE_SPINUP && + !pm8001_ha->reset_in_progress){ +/* Notify the sas layer to discover +* the the whole sas domain +*/ +pm8001_bytes_dmaed (pm8001_ha, phy_id); + } }if (pm8001_ha->phy[phy_id].enable_completion) {complete (pm8001_ha->phy[phy_id].enable_completion);
@@ -3643,7 +3650,10 @@ int pm8001_mpi_reg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) pm8001_printk("DEVREG_FAILURE_DEVICE_TYPE_NOT_SUPPORTED\n"));break ; } -complete (pm8001_dev->dcompletion); +if (pm8001_dev->dcompletion) { +complete (pm8001_dev->dcompletion); + pm8001_dev->dcompletion =NULL ; + } ccb->task =NULL ; ccb->ccb_tag =0xFFFFFFFF ;pm8001_tag_free (pm8001_ha, htag);
drivers/scsi/pm8001/pm8001_init.c +50 -3
89 lines not on this page · raw message
drivers/scsi/pm8001/pm8001_sas.c +34 -2
@@ -265,14 +265,39 @@ int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,void pm8001_scan_start (struct Scsi_Host *shost) {int i; +unsigned long lock_flags;struct pm8001_hba_info *pm8001_ha;struct sas_ha_struct *sha =SHOST_TO_SAS_HA (shost); +DECLARE_COMPLETION_ONSTACK (comp); pm8001_ha = sha->lldd_ha;/* SAS_RE_INITIALIZATION not available in SPCv/ve */ if (pm8001_ha->chip_id == chip_8001)PM8001_CHIP_DISP ->sas_re_init_req (pm8001_ha); -for (i =0 ; i < pm8001_ha->chip->n_phy; ++i) -PM8001_CHIP_DISP ->phy_start_req (pm8001_ha, i); + +if (pm8001_ha->pdev->device ==0x8001 || + pm8001_ha->pdev->device ==0x8081 || + (pm8001_ha->spinup_interval !=0 )) { +for (i =0 ; i < pm8001_ha->chip->n_phy; ++i) +PM8001_CHIP_DISP ->phy_start_req (pm8001_ha, i); + }else { +for (i =0 ; i < pm8001_ha->chip->n_phy; ++i) { +spin_lock_irqsave (&pm8001_ha->lock, lock_flags); + pm8001_ha->phy_started = i; + pm8001_ha->scan_completion = ∁ + pm8001_ha->phystart_timedout =1 ; +spin_unlock_irqrestore (&pm8001_ha->lock, lock_flags); +PM8001_CHIP_DISP ->phy_start_req (pm8001_ha, i); +wait_for_completion_timeout (&comp, +msecs_to_jiffies (500 )); +if (pm8001_ha->phystart_timedout) +PM8001_MSG_DBG (pm8001_ha,pm8001_printk ( +"Timeout happened for phyid = %d\n" , i)); + } +spin_lock_irqsave (&pm8001_ha->lock, lock_flags); + pm8001_ha->phy_started =-1 ; + pm8001_ha->scan_completion =NULL ; +spin_unlock_irqrestore (&pm8001_ha->lock, lock_flags); + } }int pm8001_scan_finished (struct Scsi_Host *shost,unsigned long time)
@@ -662,6 +687,13 @@ static int pm8001_dev_found_notify(struct domain_device *dev) flag =1 ;/* directly sata */ } }/*register this device to HBA*/ + +if (pm8001_ha->phy_started == pm8001_device->attached_phy) { +if (pm8001_ha->scan_completion !=NULL ) { + pm8001_ha->phystart_timedout =0 ; +complete (pm8001_ha->scan_completion); + } + }PM8001_DISC_DBG (pm8001_ha,pm8001_printk ("Found device\n" ));PM8001_CHIP_DISP ->reg_dev_req (pm8001_ha, pm8001_device, flag);spin_unlock_irqrestore (&pm8001_ha->lock, flags);
drivers/scsi/pm8001/pm8001_sas.h +13 -0
@@ -261,6 +261,7 @@ struct pm8001_port {u8 port_attached;u16 wide_port_phymap;u8 port_state; +u8 port_id;struct list_head list; };
@@ -566,6 +567,17 @@ struct pm8001_hba_info {u32 reset_in_progress;u32 non_fatal_count;u32 non_fatal_read_length; +bool staggered_spinup; +struct completion *scan_completion; +u32 phy_started; +u16 phystart_timedout; +int spinup_group; +int spinup_interval; +int phy_up[PM8001_MAX_PHYS ]; +struct timer_list spinup_timer; +int phy_head; +int phy_tail; +spinlock_t phy_q_lock; };struct pm8001_work {
@@ -684,6 +696,7 @@ void pm8001_open_reject_retry(int pm8001_mem_alloc (struct pci_dev *pdev,void **virt_addr,dma_addr_t *pphys_addr,u32 *pphys_addr_hi,u32 *pphys_addr_lo,u32 mem_size,u32 align); +void pm8001_spinup_timedout (struct timer_list *t);void pm8001_chip_iounmap (struct pm8001_hba_info *pm8001_ha); int pm8001_mpi_build_cmd(struct pm8001_hba_info *pm8001_ha,
drivers/scsi/pm8001/pm80xx_hwi.c +109 -16
201 lines not on this page · raw message
Signature · 1 line
2.16.3
kernel test robot
build botRe: [PATCH V7 2/2] pm80xx : Staggered spin up support.
Thank you for the patch! Perhaps something to improve:
Hi Deepak,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on v5.8]
[cannot apply to mkp-scsi/for-next scsi/for-next next-20200812] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Deepak-Ukey/pm80xx-Updates-for-the-driver-version-0-1-39/20200812-151808 base: bcf876870b95592b52519ed4aafcf9d95999bc9c config: x86_64-randconfig-c002-20200812 (attached as .config) compiler: gcc-9 (Debian 9.3.0-15) 9.3.0
If you fix the issue, kindly add following tag as appropriate
coccinelle warnings: (new ones prefixed by >>)
>> drivers/scsi/pm8001/pm8001_init.c:733:3-24: ERROR: reference preceded by free on line 708
vim +733 drivers/scsi/pm8001/pm8001_init.c
624
625 /**
626 * pm8001_init_sas_add - initialize sas address
627 * @chip_info: our ha struct.
628 *
629 * Currently we just set the fixed SAS address to our HBA,for manufacture,
630 * it should read from the EEPROM
631 */
632 static void pm8001_init_sas_add_and_spinup_config
633 (struct pm8001_hba_info *pm8001_ha)
634 {
635 u8 i, j;
636 u8 sas_add[8];
637 #ifdef PM8001_READ_VPD
638 /* For new SPC controllers WWN is stored in flash vpd
639 * For SPC/SPCve controllers WWN is stored in EEPROM
640 * For Older SPC WWN is stored in NVMD
641 */
642 DECLARE_COMPLETION_ONSTACK(completion);
643 struct pm8001_ioctl_payload payload;
644 u16 deviceid;
645 int rc;
646
647 pci_read_config_word(pm8001_ha->pdev, PCI_DEVICE_ID, &deviceid);
648 pm8001_ha->nvmd_completion = &completion;
649
650 if (pm8001_ha->chip_id == chip_8001) {
651 if (deviceid == 0x8081 || deviceid == 0x0042) {
652 payload.minor_function = 4;
653 payload.rd_length = 4096;
654 } else {
655 payload.minor_function = 0;
656 payload.rd_length = 128;
657 }
658 } else if ((pm8001_ha->chip_id == chip_8070 ||
659 pm8001_ha->chip_id == chip_8072) &&
660 pm8001_ha->pdev->subsystem_vendor == PCI_VENDOR_ID_ATTO) {
661 payload.minor_function = 4;
662 payload.rd_length = 4096;
663 } else {
664 payload.minor_function = 1;
665 payload.rd_length = 4096;
666 }
667 payload.offset = 0;
668 payload.func_specific = kzalloc(payload.rd_length, GFP_KERNEL);
669 if (!payload.func_specific) {
670 PM8001_INIT_DBG(pm8001_ha, pm8001_printk("mem alloc fail\n"));
671 return;
672 }
673 rc = PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
674 if (rc) {
675 kfree(payload.func_specific);
676 PM8001_INIT_DBG(pm8001_ha, pm8001_printk("nvmd failed\n"));
677 return;
678 }
679 wait_for_completion(&completion);
680
681 for (i = 0, j = 0; i <= 7; i++, j++) {
682 if (pm8001_ha->chip_id == chip_8001) {
683 if (deviceid == 0x8081)
684 pm8001_ha->sas_addr[j] =
685 payload.func_specific[0x704 + i];
686 else if (deviceid == 0x0042)
687 pm8001_ha->sas_addr[j] =
688 payload.func_specific[0x010 + i];
689 } else if ((pm8001_ha->chip_id == chip_8070 ||
690 pm8001_ha->chip_id == chip_8072) &&
691 pm8001_ha->pdev->subsystem_vendor == PCI_VENDOR_ID_ATTO) {
692 pm8001_ha->sas_addr[j] =
693 payload.func_specific[0x010 + i];
694 } else
695 pm8001_ha->sas_addr[j] =
696 payload.func_specific[0x804 + i];
697 }
698 memcpy(sas_add, pm8001_ha->sas_addr, SAS_ADDR_SIZE);
699 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
700 if (i && ((i % 4) == 0))
701 sas_add[7] = sas_add[7] + 4;
702 memcpy(&pm8001_ha->phy[i].dev_sas_addr,
703 sas_add, SAS_ADDR_SIZE);
704 PM8001_INIT_DBG(pm8001_ha,
705 pm8001_printk("phy %d sas_addr = %016llx\n", i,
706 pm8001_ha->phy[i].dev_sas_addr));
707 }
> 708 kfree(payload.func_specific);
709 #else
710 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
711 pm8001_ha->phy[i].dev_sas_addr = 0x50010c600047f9d0ULL;
712 pm8001_ha->phy[i].dev_sas_addr =
713 cpu_to_be64((u64)
714 (*(u64 *)&pm8001_ha->phy[i].dev_sas_addr));
715 }
716 memcpy(pm8001_ha->sas_addr, &pm8001_ha->phy[0].dev_sas_addr,
717 SAS_ADDR_SIZE);
718 #endif
719
720 /* For spinning up drives in group */
721 pm8001_ha->phy_head = -1;
722 pm8001_ha->phy_tail = -1;
723
724 for (i = 0; i < PM8001_MAX_PHYS; i++)
725 pm8001_ha->phy_up[i] = 0xff;
726
727 timer_setup(&pm8001_ha->spinup_timer,
728 (void *)pm8001_spinup_timedout, 0);
729
730 if (pm8001_ha->staggered_spinup == true) {
731 /* spinup interval in unit of 100 ms */
732 pm8001_ha->spinup_interval =
> 733 payload.func_specific[SPINUP_DELAY_OFFSET] * 100; 734 pm8001_ha->spinup_group =
735 payload.func_specific[SPINUP_GROUP_OFFSET];
736 } else {
737 pm8001_ha->spinup_interval = 0;
738 pm8001_ha->spinup_group = pm8001_ha->chip->n_phy;
739 }
740
741 if (pm8001_ha->spinup_interval > PM80XX_MAX_SPINUP_DELAY) {
742 PM8001_DISC_DBG(pm8001_ha, pm8001_printk(
743 "Spinup delay from Seeprom is %d ms, reset to %d ms\n",
744 pm8001_ha->spinup_interval * 100, PM80XX_MAX_SPINUP_DELAY));
745 pm8001_ha->spinup_interval = PM80XX_MAX_SPINUP_DELAY;
746 }
747
748 if (pm8001_ha->spinup_group > pm8001_ha->chip->n_phy) {
749 PM8001_DISC_DBG(pm8001_ha, pm8001_printk(
750 "Spinup group from Seeprom is %d, reset to %d\n",
751 pm8001_ha->spinup_group, pm8001_ha->chip->n_phy));
752 pm8001_ha->spinup_group = pm8001_ha->chip->n_phy;
753 }
754
755 PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
756 "Spinup interval : %d Spinup group %d\n",
757 pm8001_ha->spinup_interval, pm8001_ha->spinup_group));
758 }
759
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org