arm64: defconfig: Enable USB gadget with configfs
Krzysztof Kozlowski
maintainerPATCH v2 1/2 arm64: defconfig: Enable USB gadget with configfs
USB OTG connections are pretty common for embedded and development boards, for example to have networking or serial access to the device. Build as a module the USB gadget configfs options so the defconfig can be used in such development configurations.
--- arch/arm64/configs/defconfig | 11 +++++++++++ 1 file changed, 11 insertions(+)
arch/arm64/configs/defconfig +11 -0
@@ -725,6 +725,17 @@ CONFIG_USB_GADGET=y CONFIG_USB_RENESAS_USBHS_UDC=m CONFIG_USB_RENESAS_USB3=m CONFIG_USB_TEGRA_XUDC=m +CONFIG_USB_CONFIGFS=m +CONFIG_USB_CONFIGFS_SERIAL=y +CONFIG_USB_CONFIGFS_ACM=y +CONFIG_USB_CONFIGFS_OBEX=y +CONFIG_USB_CONFIGFS_NCM=y +CONFIG_USB_CONFIGFS_ECM=y +CONFIG_USB_CONFIGFS_ECM_SUBSET=y +CONFIG_USB_CONFIGFS_RNDIS=y +CONFIG_USB_CONFIGFS_EEM=y +CONFIG_USB_CONFIGFS_MASS_STORAGE=y +CONFIG_USB_CONFIGFS_F_FS=y CONFIG_TYPEC=m CONFIG_TYPEC_TCPM=m CONFIG_TYPEC_FUSB302=m
Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Krzysztof Kozlowski
maintainerPATCH v2 2/2 arm64: defconfig: Enable ptn5150 extcon driver
Enable the extcon driver for NXP PTN5150A chips (CC logic for USB Type-C applications) present on some of i.MX8 evaluation boards (e.g. Variscite Symphony board).
---
Changes since v1:
1. Build as module
--- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm64/configs/defconfig +1 -0
@@ -926,6 +926,7 @@ CONFIG_ARCH_TEGRA_194_SOC=y CONFIG_ARCH_K3_AM6_SOC=y CONFIG_ARCH_K3_J721E_SOC=y CONFIG_TI_SCI_PM_DOMAINS=y +CONFIG_EXTCON_PTN5150=m CONFIG_EXTCON_USB_GPIO=y CONFIG_EXTCON_USBC_CROS_EC=y CONFIG_IIO=y
Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Shawn Guo
AppliedQuoted 6 lines · Krzysztof Kozlowski
USB OTG connections are pretty common for embedded and development boards, for example to have networking or serial access to the device. Build as a module the USB gadget configfs options so the defconfig can be used in such development configurations.
Signed-off-by Krzysztof Kozlowski <[email protected]>
Applied both, thanks.
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Krzysztof Kozlowski
maintainerQuoted 9 lines · Shawn Guo
Quoted 6 lines · Krzysztof Kozlowski
USB OTG connections are pretty common for embedded and development boards, for example to have networking or serial access to the device. Build as a module the USB gadget configfs options so the defconfig can be used in such development configurations.
Signed-off-by Krzysztof Kozlowski <[email protected]>Applied both, thanks.
Thanks, although few days ago I got confirmation from patchwork that Olof already applied them to arm-soc. I cannot find them in arm-soc or next trees, though.
Dear Olof,
Did you pick these up already?
Best regards,
Krzysztof
Hi,
Quoted 10 lines · Krzysztof Kozlowski
Quoted 8 lines · Shawn Guo
Quoted 6 lines · Krzysztof Kozlowski
USB OTG connections are pretty common for embedded and development boards, for example to have networking or serial access to the device. Build as a module the USB gadget configfs options so the defconfig can be used in such development configurations.
Signed-off-by Krzysztof Kozlowski <[email protected]>
Quoted 8 lines
Quoted 1 line
Applied both, thanks.
Thanks, although few days ago I got confirmation from patchwork that Olof already applied them to arm-soc. I cannot find them in arm-soc or next trees, though.
Dear Olof,
Did you pick these up already?
Yes, I applied them to the arm/fixes in the soc tree:
https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git/log/?h=arm/fixes
-Olof
Quoted 19 lines · Olof Johansson
Hi,
Quoted 16 lines · Krzysztof Kozlowski
Quoted 9 lines · Shawn Guo
Quoted 6 lines · Krzysztof Kozlowski
USB OTG connections are pretty common for embedded and development boards, for example to have networking or serial access to the device. Build as a module the USB gadget configfs options so the defconfig can be used in such development configurations.
Signed-off-by Krzysztof Kozlowski <[email protected]>Applied both, thanks.
Thanks, although few days ago I got confirmation from patchwork that Olof already applied them to arm-soc. I cannot find them in arm-soc or next trees, though.
Quoted 5 lines
Quoted 2 lines
Dear Olof,
Did you pick these up already?Yes, I applied them to the arm/fixes in the soc tree:
https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git/log/?h=arm/fixes
Okay, dropped them from my tree.
Shawn
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel