coresight: cti: disclaim device only when it's claimed
PATCH 1/1 coresight: cti: disclaim device only when it's claimed
Coresight_claim_device() is called in cti_starting_cpu() only when CTI is enabled while coresight_disclaim_device() is called uncontionally in cti_dying_cpu(). This triggered below WARNING. Only call disclaim device when CTI device is enabled to fix it.
[ 75.989643] WARNING: CPU: 1 PID: 14 at kernel/drivers/hwtracing/coresight/coresight.c:209 coresight_disclaim_device_unlocked+0x10/0x24 [ 75.989697] CPU: 1 PID: 14 Comm: migration/1 Not tainted 5.9.0-rc1-gff1304be0a05-dirty #21 [ 75.989709] Hardware name: Thundercomm Dragonboard 845c (DT) [ 75.989737] pstate: 80c00085 (Nzcv daIf +PAN +UAO BTYPE=--) [ 75.989758] pc : coresight_disclaim_device_unlocked+0x10/0x24 [ 75.989775] lr : coresight_disclaim_device+0x24/0x38 [ 75.989783] sp : ffff800011cd3c90 . [ 75.990018] Call trace: [ 75.990041] coresight_disclaim_device_unlocked+0x10/0x24 [ 75.990066] cti_dying_cpu+0x34/0x4c [ 75.990101] cpuhp_invoke_callback+0x84/0x1e0 [ 75.990121] take_cpu_down+0x90/0xe0 [ 75.990154] multi_cpu_stop+0x134/0x160 [ 75.990171] cpu_stopper_thread+0xb0/0x13c [ 75.990196] smpboot_thread_fn+0x1c4/0x270 [ 75.990222] kthread+0x128/0x154 [ 75.990251] ret_from_fork+0x10/0x18
--- drivers/hwtracing/coresight/coresight-cti.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/hwtracing/coresight/coresight-cti.c +2 -1
@@ -742,7 +742,8 @@ static int cti_dying_cpu(unsigned int cpu)spin_lock (&drvdata->spinlock); drvdata->config.hw_powered = false; -coresight_disclaim_device (drvdata->base); +if (drvdata->config.hw_enabled) +coresight_disclaim_device (drvdata->base);spin_unlock (&drvdata->spinlock);return 0 ; }
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
PATCH 1/1 coresight: cti: write regsiters directly in cti_enable_hw()
Deadlock as below is triggered by one CPU holds drvdata->spinlock and calls cti_enable_hw(). Smp_call_function_single() is called in cti_enable_hw() and tries to let another CPU write CTI registers. That CPU is trying to get drvdata->spinlock in cti_cpu_pm_notify() and doesn't response to IPI from smp_call_function_single().
[ 988.335937] CPU: 6 PID: 10258 Comm: sh Tainted: G W L 5.8.0-rc6-mainline-16783-gc38daa79b26b-dirty #1 [ 988.346364] Hardware name: Thundercomm Dragonboard 845c (DT) [ 988.352073] pstate: 20400005 (nzCv daif +PAN -UAO BTYPE=--) [ 988.357689] pc : smp_call_function_single+0x158/0x1b8 [ 988.362782] lr : smp_call_function_single+0x124/0x1b8 ... [ 988.451638] Call trace: [ 988.454119] smp_call_function_single+0x158/0x1b8 [ 988.458866] cti_enable+0xb4/0xf8 [coresight_cti] [ 988.463618] coresight_control_assoc_ectdev+0x6c/0x128 [coresight] [ 988.469855] coresight_enable+0x1f0/0x364 [coresight] [ 988.474957] enable_source_store+0x5c/0x9c [coresight] [ 988.480140] dev_attr_store+0x14/0x28 [ 988.483839] sysfs_kf_write+0x38/0x4c [ 988.487532] kernfs_fop_write+0x1c0/0x2b0 [ 988.491585] vfs_write+0xfc/0x300 [ 988.494931] ksys_write+0x78/0xe0 [ 988.498283] __arm64_sys_write+0x18/0x20 [ 988.502240] el0_svc_common+0x98/0x160 [ 988.506024] do_el0_svc+0x78/0x80 [ 988.509377] el0_sync_handler+0xd4/0x270 [ 988.513337] el0_sync+0x164/0x180
This change write CTI registers directly in cti_enable_hw(). Config->hw_powered has been checked to be true with spinlock holded. CTI is powered and can be programmed until spinlock is released.
--- drivers/hwtracing/coresight/coresight-cti.c | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-)
drivers/hwtracing/coresight/coresight-cti.c +1 -16
@@ -86,13 +86,6 @@ void cti_write_all_hw_regs(struct cti_drvdata *drvdata)CS_LOCK (drvdata->base); } -static void cti_enable_hw_smp_call (void *info) -{ -struct cti_drvdata *drvdata = info; - -cti_write_all_hw_regs (drvdata); -} -/* write regs to hardware and enable */ static int cti_enable_hw (struct cti_drvdata *drvdata) {
@@ -112,15 +105,7 @@ static int cti_enable_hw(struct cti_drvdata *drvdata)if (rc) goto cti_err_not_enabled; -if (drvdata->ctidev.cpu >=0 ) { - rc =smp_call_function_single (drvdata->ctidev.cpu, - cti_enable_hw_smp_call, - drvdata,1 ); -if (rc) - goto cti_err_not_enabled; - }else { -cti_write_all_hw_regs (drvdata); - } +cti_write_all_hw_regs (drvdata); config->hw_enabled = true;atomic_inc (&drvdata->config.enable_req_count);
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
PATCH 1/1 coresight: cti: remove pm_runtime_get_sync() from CPU hotplug
In reply to Tingwei ZhangBelow BUG is triggered by call pm_runtime_get_sync() in cti_cpuhp_enable_hw(). It's in CPU hotplug callback with interrupt disabled. Pm_runtime_get_sync() calls clock driver to enable clock which could sleep. Remove pm_runtime_get_sync() in cti_cpuhp_enable_hw() since pm_runtime_get_sync() is called in cti_enabld and pm_runtime_put() is called in cti_disabled. No need to increase pm count when CPU gets online since it's not decreased when CPU is offline.
[ 105.800279] BUG: scheduling while atomic: swapper/1/0/0x00000002 [ 105.800290] Modules linked in: [ 105.800327] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W 5.9.0-rc1-gff1304be0a05-dirty #21 [ 105.800337] Hardware name: Thundercomm Dragonboard 845c (DT) [ 105.800353] Call trace: [ 105.800414] dump_backtrace+0x0/0x1d4 [ 105.800439] show_stack+0x14/0x1c [ 105.800462] dump_stack+0xc0/0x100 [ 105.800490] __schedule_bug+0x58/0x74 [ 105.800523] __schedule+0x590/0x65c [ 105.800538] schedule+0x78/0x10c [ 105.800553] schedule_timeout+0x188/0x250 [ 105.800585] qmp_send.constprop.10+0x12c/0x1b0 [ 105.800599] qmp_qdss_clk_prepare+0x18/0x20 [ 105.800622] clk_core_prepare+0x48/0xd4 [ 105.800639] clk_prepare+0x20/0x34 [ 105.800663] amba_pm_runtime_resume+0x54/0x90 [ 105.800695] __rpm_callback+0xdc/0x138 [ 105.800709] rpm_callback+0x24/0x78 [ 105.800724] rpm_resume+0x328/0x47c [ 105.800739] __pm_runtime_resume+0x50/0x74 [ 105.800768] cti_starting_cpu+0x40/0xa4 [ 105.800795] cpuhp_invoke_callback+0x84/0x1e0 [ 105.800814] notify_cpu_starting+0x9c/0xb8 [ 105.800834] secondary_start_kernel+0xd8/0x164 [ 105.800933] CPU1: Booted secondary processor 0x0000000100 [0x517f803c]
--- drivers/hwtracing/coresight/coresight-cti.c | 3 --- 1 file changed, 3 deletions(-)
drivers/hwtracing/coresight/coresight-cti.c +0 -3
@@ -126,9 +126,7 @@ static int cti_enable_hw(struct cti_drvdata *drvdata)static void cti_cpuhp_enable_hw (struct cti_drvdata *drvdata) {struct cti_config *config = &drvdata->config; -struct device *dev = &drvdata->csdev->dev; -pm_runtime_get_sync (dev->parent);spin_lock (&drvdata->spinlock); config->hw_powered = true;
@@ -148,7 +146,6 @@ static void cti_cpuhp_enable_hw(struct cti_drvdata *drvdata)/* did not re-enable due to no claim / no request */ cti_hp_not_enabled:spin_unlock (&drvdata->spinlock); -pm_runtime_put (dev->parent); }/* disable hardware */
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
Re: [PATCH] coresight: cti: remove pm_runtime_get_sync() from CPU hotplug
Quoted 66 lines · Tingwei Zhang
Below BUG is triggered by call
pm_runtime_get_sync()incti_cpuhp_enable_hw(). It's in CPU hotplug callback with interrupt disabled.Pm_runtime_get_sync()calls clock driver to enable clock which could sleep. Removepm_runtime_get_sync()incti_cpuhp_enable_hw()sincepm_runtime_get_sync()is called incti_enabldandpm_runtime_put()is called incti_disabled. No need to increase pm count when CPU gets online since it's not decreased when CPU is offline.[ 105.800279] BUG: scheduling while atomic: swapper/1/0/0x00000002 [ 105.800290] Modules linked in: [ 105.800327] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W 5.9.0-rc1-gff1304be0a05-dirty #21 [ 105.800337] Hardware name: Thundercomm Dragonboard 845c (DT) [ 105.800353] Call trace: [ 105.800414] dump_backtrace+0x0/0x1d4 [ 105.800439] show_stack+0x14/0x1c [ 105.800462] dump_stack+0xc0/0x100 [ 105.800490] __schedule_bug+0x58/0x74 [ 105.800523] __schedule+0x590/0x65c [ 105.800538] schedule+0x78/0x10c [ 105.800553] schedule_timeout+0x188/0x250 [ 105.800585] qmp_send.constprop.10+0x12c/0x1b0 [ 105.800599] qmp_qdss_clk_prepare+0x18/0x20 [ 105.800622] clk_core_prepare+0x48/0xd4 [ 105.800639] clk_prepare+0x20/0x34 [ 105.800663] amba_pm_runtime_resume+0x54/0x90 [ 105.800695] __rpm_callback+0xdc/0x138 [ 105.800709] rpm_callback+0x24/0x78 [ 105.800724] rpm_resume+0x328/0x47c [ 105.800739] __pm_runtime_resume+0x50/0x74 [ 105.800768] cti_starting_cpu+0x40/0xa4 [ 105.800795] cpuhp_invoke_callback+0x84/0x1e0 [ 105.800814] notify_cpu_starting+0x9c/0xb8 [ 105.800834] secondary_start_kernel+0xd8/0x164 [ 105.800933] CPU1: Booted secondary processor 0x0000000100 [0x517f803c]Fixes e9b880581d55 ("coresight: cti: Add CPU Hotplug handling to CTI driver")Signed-off-by Tingwei Zhang <[email protected]>--- drivers/hwtracing/coresight/coresight-cti.c | 3 --- 1 file changed, 3 deletions(-)drivers/hwtracing/coresight/coresight-cti.c +0
-4@@ -126,9 +126,7 @@ static int cti_enable_hw(struct cti_drvdata *drvdata)static void cti_cpuhp_enable_hw (struct cti_drvdata *drvdata) {struct cti_config *config = &drvdata->config; -struct device *dev = &drvdata->csdev->dev; -pm_runtime_get_sync (dev->parent);spin_lock (&drvdata->spinlock); config->hw_powered = true;@@ -148,7 +146,6 @@ static void cti_cpuhp_enable_hw(struct cti_drvdata *drvdata)/* did not re-enable due to no claim / no request */ cti_hp_not_enabled:spin_unlock (&drvdata->spinlock); -pm_runtime_put (dev->parent); }/* disable hardware */ --
Quoted 3 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
Reviewed-by Mike Leach <[email protected]>
Signature · 3 lines
Mike Leach Principal Engineer, ARM Ltd. Manchester Design Centre. UK
Re: [PATCH] coresight: cti: write regsiters directly in cti_enable_hw()
In reply to Tingwei ZhangHi Tingwei
Quoted 31 lines · Tingwei Zhang
Deadlock as below is triggered by one CPU holds
drvdata->spinlockand callscti_enable_hw().Smp_call_function_single()is called incti_enable_hw()and tries to let another CPU write CTI registers. That CPU is trying to getdrvdata->spinlockincti_cpu_pm_notify()and doesn't response to IPI fromsmp_call_function_single().[ 988.335937] CPU: 6 PID: 10258 Comm: sh Tainted: G W L 5.8.0-rc6-mainline-16783-gc38daa79b26b-dirty #1 [ 988.346364] Hardware name: Thundercomm Dragonboard 845c (DT) [ 988.352073] pstate: 20400005 (nzCv daif +PAN -UAO BTYPE=--) [ 988.357689] pc : smp_call_function_single+0x158/0x1b8 [ 988.362782] lr : smp_call_function_single+0x124/0x1b8 ... [ 988.451638] Call trace: [ 988.454119] smp_call_function_single+0x158/0x1b8 [ 988.458866] cti_enable+0xb4/0xf8 [coresight_cti] [ 988.463618] coresight_control_assoc_ectdev+0x6c/0x128 [coresight] [ 988.469855] coresight_enable+0x1f0/0x364 [coresight] [ 988.474957] enable_source_store+0x5c/0x9c [coresight] [ 988.480140] dev_attr_store+0x14/0x28 [ 988.483839] sysfs_kf_write+0x38/0x4c [ 988.487532] kernfs_fop_write+0x1c0/0x2b0 [ 988.491585] vfs_write+0xfc/0x300 [ 988.494931] ksys_write+0x78/0xe0 [ 988.498283] __arm64_sys_write+0x18/0x20 [ 988.502240] el0_svc_common+0x98/0x160 [ 988.506024] do_el0_svc+0x78/0x80 [ 988.509377] el0_sync_handler+0xd4/0x270 [ 988.513337] el0_sync+0x164/0x180
Quoted 4 lines
This change write CTI registers directly in
cti_enable_hw().Config->hw_poweredhas been checked to be true with spinlock holded. CTI is powered and can be programmed until spinlock is released.
Agreed.
Reviewed-by Mike Leach <[email protected]>
Quoted 49 lines
Fixes 6a0953ce7de9 ("coresight: cti: Add CPU idle pm notifer to CTI devices")Signed-off-by Tingwei Zhang <[email protected]>--- drivers/hwtracing/coresight/coresight-cti.c | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-)drivers/hwtracing/coresight/coresight-cti.c +1
-17@@ -86,13 +86,6 @@ void cti_write_all_hw_regs(struct cti_drvdata *drvdata)CS_LOCK (drvdata->base); } -static void cti_enable_hw_smp_call (void *info) -{ -struct cti_drvdata *drvdata = info; - -cti_write_all_hw_regs (drvdata); -} -/* write regs to hardware and enable */ static int cti_enable_hw (struct cti_drvdata *drvdata) {@@ -112,15 +105,7 @@ static int cti_enable_hw(struct cti_drvdata *drvdata)if (rc) goto cti_err_not_enabled; -if (drvdata->ctidev.cpu >=0 ) { - rc =smp_call_function_single (drvdata->ctidev.cpu, - cti_enable_hw_smp_call, - drvdata,1 ); -if (rc) - goto cti_err_not_enabled; - }else { -cti_write_all_hw_regs (drvdata); - } +cti_write_all_hw_regs (drvdata); config->hw_enabled = true;atomic_inc (&drvdata->config.enable_req_count); --The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
_______________________________________________
CoreSight mailing list
[email protected]
https://lists.linaro.org/mailman/listinfo/coresight
Signature · 3 lines
Mike Leach Principal Engineer, ARM Ltd. Manchester Design Centre. UK
Quoted 49 lines · Tingwei Zhang
Coresight_claim_device()is called incti_starting_cpu()only when CTI is enabled whilecoresight_disclaim_device()is called uncontionally incti_dying_cpu(). This triggered below WARNING. Only call disclaim device when CTI device is enabled to fix it.[ 75.989643] WARNING: CPU: 1 PID: 14 at kernel/drivers/hwtracing/coresight/coresight.c:209 coresight_disclaim_device_unlocked+0x10/0x24 [ 75.989697] CPU: 1 PID: 14 Comm: migration/1 Not tainted 5.9.0-rc1-gff1304be0a05-dirty #21 [ 75.989709] Hardware name: Thundercomm Dragonboard 845c (DT) [ 75.989737] pstate: 80c00085 (Nzcv daIf +PAN +UAO BTYPE=--) [ 75.989758] pc : coresight_disclaim_device_unlocked+0x10/0x24 [ 75.989775] lr : coresight_disclaim_device+0x24/0x38 [ 75.989783] sp : ffff800011cd3c90 . [ 75.990018] Call trace: [ 75.990041] coresight_disclaim_device_unlocked+0x10/0x24 [ 75.990066] cti_dying_cpu+0x34/0x4c [ 75.990101] cpuhp_invoke_callback+0x84/0x1e0 [ 75.990121] take_cpu_down+0x90/0xe0 [ 75.990154] multi_cpu_stop+0x134/0x160 [ 75.990171] cpu_stopper_thread+0xb0/0x13c [ 75.990196] smpboot_thread_fn+0x1c4/0x270 [ 75.990222] kthread+0x128/0x154 [ 75.990251] ret_from_fork+0x10/0x18Fixes e9b880581d55 ("coresight: cti: Add CPU Hotplug handling to CTI driver")Signed-off-by Tingwei Zhang <[email protected]>--- drivers/hwtracing/coresight/coresight-cti.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)drivers/hwtracing/coresight/coresight-cti.c +2
-2@@ -742,7 +742,8 @@ static int cti_dying_cpu(unsigned int cpu)spin_lock (&drvdata->spinlock); drvdata->config.hw_powered = false; -coresight_disclaim_device (drvdata->base); +if (drvdata->config.hw_enabled) +coresight_disclaim_device (drvdata->base);spin_unlock (&drvdata->spinlock);return 0 ; } --
Quoted 3 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
Signature · 8 lines
Mike Leach Principal Engineer, ARM Ltd. Manchester Design Centre. UK _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Mathieu Poirier
AppliedRe: [PATCH] coresight: cti: write regsiters directly in cti_enable_hw()
In reply to Tingwei ZhangHi Tingwei,
Quoted 21 lines · Tingwei Zhang
Deadlock as below is triggered by one CPU holds
drvdata->spinlockand callscti_enable_hw().Smp_call_function_single()is called incti_enable_hw()and tries to let another CPU write CTI registers. That CPU is trying to getdrvdata->spinlockincti_cpu_pm_notify()and doesn't response to IPI fromsmp_call_function_single().[ 988.335937] CPU: 6 PID: 10258 Comm: sh Tainted: G W L 5.8.0-rc6-mainline-16783-gc38daa79b26b-dirty #1 [ 988.346364] Hardware name: Thundercomm Dragonboard 845c (DT) [ 988.352073] pstate: 20400005 (nzCv daif +PAN -UAO BTYPE=--) [ 988.357689] pc : smp_call_function_single+0x158/0x1b8 [ 988.362782] lr : smp_call_function_single+0x124/0x1b8 ... [ 988.451638] Call trace: [ 988.454119] smp_call_function_single+0x158/0x1b8 [ 988.458866] cti_enable+0xb4/0xf8 [coresight_cti] [ 988.463618] coresight_control_assoc_ectdev+0x6c/0x128 [coresight] [ 988.469855] coresight_enable+0x1f0/0x364 [coresight] [ 988.474957] enable_source_store+0x5c/0x9c [coresight] [ 988.480140] dev_attr_store+0x14/0x28 [ 988.483839] sysfs_kf_write+0x38/0x4c
Quoted 9 lines
[ 988.487532] kernfs_fop_write+0x1c0/0x2b0 [ 988.491585] vfs_write+0xfc/0x300 [ 988.494931] ksys_write+0x78/0xe0 [ 988.498283] __arm64_sys_write+0x18/0x20 [ 988.502240] el0_svc_common+0x98/0x160 [ 988.506024] do_el0_svc+0x78/0x80 [ 988.509377] el0_sync_handler+0xd4/0x270 [ 988.513337] el0_sync+0x164/0x180
Was this the full log or you did cut some of it?
Quoted 4 lines
This change write CTI registers directly in
cti_enable_hw().Config->hw_poweredhas been checked to be true with spinlock holded. CTI is powered and can be programmed until spinlock is released.
From your explanation above it seems that cti_enable_hw() was called from, say CPUy, to enable the CTI associated to CPUx. CTIx's drvdata->spinlock was taken and smp_call_function_single() called right after. That woke up CPUx and cti_cpu_pm_notify() was executed on CPUx in interrupt context, trying to take CTIx's drvdata->spinlock. That hung CPUx and the kernel got angry. Is my assessment correct?
If so I don't think the fix suggested in this patch will work. The same condition will happen whenever cti_enable_hw() is called on a CPU to enable a CTI that belongs to another CPU and that cti_cpu_pm_notify() is called on latter CPU at the same time.
I think a better solution is to grab the lock in cti_enable_hw() and check the value of ->ctidev.cpu. If not a global CPU, i.e >= 0, then release the lock and call smp_call_function_single(). In cti_enable_hw_smp_call() take the lock again and move forward from there.
I have applied the other two patches in this set so no need to send them again.
Thanks,
Mathieu
Quoted 45 lines
Fixes 6a0953ce7de9 ("coresight: cti: Add CPU idle pm notifer to CTI devices")Signed-off-by Tingwei Zhang <[email protected]>--- drivers/hwtracing/coresight/coresight-cti.c | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-)drivers/hwtracing/coresight/coresight-cti.c +1
-16@@ -86,13 +86,6 @@ void cti_write_all_hw_regs(struct cti_drvdata *drvdata)CS_LOCK (drvdata->base); } -static void cti_enable_hw_smp_call (void *info) -{ -struct cti_drvdata *drvdata = info; - -cti_write_all_hw_regs (drvdata); -} -/* write regs to hardware and enable */ static int cti_enable_hw (struct cti_drvdata *drvdata) {@@ -112,15 +105,7 @@ static int cti_enable_hw(struct cti_drvdata *drvdata)if (rc) goto cti_err_not_enabled; -if (drvdata->ctidev.cpu >=0 ) { - rc =smp_call_function_single (drvdata->ctidev.cpu, - cti_enable_hw_smp_call, - drvdata,1 ); -if (rc) - goto cti_err_not_enabled; - }else { -cti_write_all_hw_regs (drvdata); - } +cti_write_all_hw_regs (drvdata); config->hw_enabled = true;atomic_inc (&drvdata->config.enable_req_count);Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
Re: [PATCH] coresight: cti: write regsiters directly in cti_enable_hw()
In reply to Tingwei ZhangQuoted 62 lines · Tingwei Zhang
Deadlock as below is triggered by one CPU holds
drvdata->spinlockand callscti_enable_hw().Smp_call_function_single()is called incti_enable_hw()and tries to let another CPU write CTI registers. That CPU is trying to getdrvdata->spinlockincti_cpu_pm_notify()and doesn't response to IPI fromsmp_call_function_single().[ 988.335937] CPU: 6 PID: 10258 Comm: sh Tainted: G W L 5.8.0-rc6-mainline-16783-gc38daa79b26b-dirty #1 [ 988.346364] Hardware name: Thundercomm Dragonboard 845c (DT) [ 988.352073] pstate: 20400005 (nzCv daif +PAN -UAO BTYPE=--) [ 988.357689] pc : smp_call_function_single+0x158/0x1b8 [ 988.362782] lr : smp_call_function_single+0x124/0x1b8 ... [ 988.451638] Call trace: [ 988.454119] smp_call_function_single+0x158/0x1b8 [ 988.458866] cti_enable+0xb4/0xf8 [coresight_cti] [ 988.463618] coresight_control_assoc_ectdev+0x6c/0x128 [coresight] [ 988.469855] coresight_enable+0x1f0/0x364 [coresight] [ 988.474957] enable_source_store+0x5c/0x9c [coresight] [ 988.480140] dev_attr_store+0x14/0x28 [ 988.483839] sysfs_kf_write+0x38/0x4c [ 988.487532] kernfs_fop_write+0x1c0/0x2b0 [ 988.491585] vfs_write+0xfc/0x300 [ 988.494931] ksys_write+0x78/0xe0 [ 988.498283] __arm64_sys_write+0x18/0x20 [ 988.502240] el0_svc_common+0x98/0x160 [ 988.506024] do_el0_svc+0x78/0x80 [ 988.509377] el0_sync_handler+0xd4/0x270 [ 988.513337] el0_sync+0x164/0x180This change write CTI registers directly in
cti_enable_hw().Config->hw_poweredhas been checked to be true with spinlock holded. CTI is powered and can be programmed until spinlock is released.Fixes 6a0953ce7de9 ("coresight: cti: Add CPU idle pm notifer to CTI devices")Signed-off-by Tingwei Zhang <[email protected]>--- drivers/hwtracing/coresight/coresight-cti.c | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-)drivers/hwtracing/coresight/coresight-cti.c +0
-7@@ -86,13 +86,6 @@ void cti_write_all_hw_regs(struct cti_drvdata *drvdata)CS_LOCK (drvdata->base); } -static void cti_enable_hw_smp_call (void *info) -{ -struct cti_drvdata *drvdata = info; - -cti_write_all_hw_regs (drvdata); -} -/* write regs to hardware and enable */ static int cti_enable_hw (struct cti_drvdata *drvdata) {@@ -112,15 +105,7 @@ static int cti_enable_hw(struct cti_drvdata *drvdata)if (rc) goto cti_err_not_enabled;
drivers/hwtracing/coresight/coresight-cti.c static int cti_enable_hw(struct cti_drvdata *drvdata) · line 108
Quoted 10 lines
drivers/hwtracing/coresight/coresight-cti.c +1
-9-if (drvdata->ctidev.cpu >=0 ) { - rc =smp_call_function_single (drvdata->ctidev.cpu, - cti_enable_hw_smp_call, - drvdata,1 ); -if (rc) - goto cti_err_not_enabled; - }else { -cti_write_all_hw_regs (drvdata); - } +cti_write_all_hw_regs (drvdata);
I forgot... Looking at the code in cti_enable_hw() the claim tags are not released in the event that smp_call_function_single() fails. Please address that as part of refactoring the function.
Thanks,
Mathieu
Quoted 7 lines
drivers/hwtracing/coresight/coresight-cti.c +0
-1config->hw_enabled = true;atomic_inc (&drvdata->config.enable_req_count); --The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
Re: [PATCH] coresight: cti: write regsiters directly in cti_enable_hw()
In reply to Mathieu PoirierQuoted 34 lines · Mathieu Poirier
Hi Tingwei,
Quoted 21 lines · Tingwei Zhang
Deadlock as below is triggered by one CPU holds
drvdata->spinlockand callscti_enable_hw().Smp_call_function_single()is called incti_enable_hw()and tries to let another CPU write CTI registers. That CPU is trying to getdrvdata->spinlockincti_cpu_pm_notify()and doesn't response to IPI fromsmp_call_function_single().[ 988.335937] CPU: 6 PID: 10258 Comm: sh Tainted: G W L 5.8.0-rc6-mainline-16783-gc38daa79b26b-dirty #1 [ 988.346364] Hardware name: Thundercomm Dragonboard 845c (DT) [ 988.352073] pstate: 20400005 (nzCv daif +PAN -UAO BTYPE=--) [ 988.357689] pc : smp_call_function_single+0x158/0x1b8 [ 988.362782] lr : smp_call_function_single+0x124/0x1b8 ... [ 988.451638] Call trace: [ 988.454119] smp_call_function_single+0x158/0x1b8 [ 988.458866] cti_enable+0xb4/0xf8 [coresight_cti] [ 988.463618] coresight_control_assoc_ectdev+0x6c/0x128 [coresight] [ 988.469855] coresight_enable+0x1f0/0x364 [coresight] [ 988.474957] enable_source_store+0x5c/0x9c [coresight] [ 988.480140] dev_attr_store+0x14/0x28 [ 988.483839] sysfs_kf_write+0x38/0x4cQuoted 9 lines
[ 988.487532] kernfs_fop_write+0x1c0/0x2b0 [ 988.491585] vfs_write+0xfc/0x300 [ 988.494931] ksys_write+0x78/0xe0 [ 988.498283] __arm64_sys_write+0x18/0x20 [ 988.502240] el0_svc_common+0x98/0x160 [ 988.506024] do_el0_svc+0x78/0x80 [ 988.509377] el0_sync_handler+0xd4/0x270 [ 988.513337] el0_sync+0x164/0x180
Quoted 2 lines
Was this the full log or you did cut some of it?
I cut some CPU registers' value since it's too long and not relevant. The Call trace is full.
Quoted 5 lines
Quoted 4 lines
This change write CTI registers directly in
cti_enable_hw().Config->hw_poweredhas been checked to be true with spinlock holded. CTI is powered and can be programmed until spinlock is released.
Quoted 10 lines
From your explanation above it seems that
cti_enable_hw()was called from, say
CPUy, to enable the CTI associated to CPUx. CTIx'sdrvdata->spinlockwas taken
andsmp_call_function_single()called right after. That woke up CPUx andcti_cpu_pm_notify()was executed on CPUx in interrupt context, trying to take
CTIx'sdrvdata->spinlock. That hung CPUx and the kernel got angry. Is my assessment correct?
Most of them is correct. The only difference is CPUx is power on when cti_enable_hw() is called. Otherwise it will goto cti_state_unchanged:
and won't call cti_enable_hw_smp_call(). cti_cpu_pm_notify() is called when CPUx tries to suspend instead of resume.
Quoted 7 lines
If so I don't think the fix suggested in this patch will work. The same condition will happen whenever
cti_enable_hw()is called on a CPU to enable a
CTI that belongs to another CPU and thatcti_cpu_pm_notify()is called on latter
CPU at the same time.
I'm not sure I understand this correctly. Let me clarify it a little bit. It's a deadlock since cti_enable_hw() holds the spinlock and calls cti_enable_hw_smp_call() from CPUx to enable CTI associated to CPUy. It waits for cti_enable_hw_smp_call() to return. IPI is sent to CPUy while CPUy is in cti_cpu_pm_notify() and waits for spinlock. In this patch, I remove cti_enable_hw_smp_call() and write CTI CPU directly on CPUx. It won't wait for CPUy and release spinlock after program registers of CTI. After cti_enable_hw() releases spinlock, cti_cpu_pm_notify() will continue to run. Since spinlock is held and config->hw_powered is true, we don't need to worry about CPUy power down when we program CTI on CPUx.
Quoted 8 lines
I think a better solution is to grab the lock in
cti_enable_hw()and check the
value of ->ctidev.cpu. If not a global CPU, i.e >= 0, then release the lock and
callsmp_call_function_single(). Incti_enable_hw_smp_call()take the lock
again and move forward from there.
After cti_enable_hw() releases the lock, it's possible that CPU is offline by user, cti_enable_hw_smp_call() will fail in this case.
Quoted 3 lines
I have applied the other two patches in this set so no need to send them again.
Thanks,
Tingwei
Quoted 58 lines
Thanks,
MathieuQuoted 1 line
Fixes 6a0953ce7de9 ("coresight: cti: Add CPU idle pm notifer to CTIdevices")
Review
Quoted 6 lines
Signed-off-by Tingwei Zhang <[email protected]>--- drivers/hwtracing/coresight/coresight-cti.c | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-)(quoted diff) +0
-0
b/drivers/hwtracing/coresight/coresight-cti.cdrivers/hwtracing/coresight/coresight-cti.c void cti_write_all_hw_regs(struct cti_drvdata
Quoted 4 lines
index
3ccc703dc940..869569eb8c7f100644drivers/hwtracing/coresight/coresight-cti.c +0
-0@@ -86,13 +86,6 @@ void cti_write_all_hw_regs(struct cti_drvdata*drvdata)
drivers/hwtracing/coresight/coresight-cti.c static int cti_enable_hw(struct cti_drvdata
Quoted 14 lines
drivers/hwtracing/coresight/coresight-cti.c +0
-7CS_LOCK (drvdata->base); } -static void cti_enable_hw_smp_call (void *info) -{ -struct cti_drvdata *drvdata = info; - -cti_write_all_hw_regs (drvdata); -} -/* write regs to hardware and enable */ static int cti_enable_hw (struct cti_drvdata *drvdata) {@@ -112,15 +105,7 @@ static int cti_enable_hw(struct cti_drvdata*drvdata)
Quoted 18 lines
drivers/hwtracing/coresight/coresight-cti.c +1
-9if (rc) goto cti_err_not_enabled; -if (drvdata->ctidev.cpu >=0 ) { - rc =smp_call_function_single (drvdata->ctidev.cpu, - cti_enable_hw_smp_call, - drvdata,1 ); -if (rc) - goto cti_err_not_enabled; - }else { -cti_write_all_hw_regs (drvdata); - } +cti_write_all_hw_regs (drvdata); config->hw_enabled = true;atomic_inc (&drvdata->config.enable_req_count);Signature · 1 line
The Qualcomm Innovation Center, Inc. is a member of the Code AuroraForum,
Quoted 2 lines
a Linux Foundation Collaborative Project
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH] coresight: cti: write regsiters directly in cti_enable_hw()
Quoted 90 lines · Tingwei Zhang
Quoted 34 lines · Mathieu Poirier
Hi Tingwei,
Quoted 21 lines · Tingwei Zhang
Deadlock as below is triggered by one CPU holds
drvdata->spinlockand callscti_enable_hw().Smp_call_function_single()is called incti_enable_hw()and tries to let another CPU write CTI registers. That CPU is trying to getdrvdata->spinlockincti_cpu_pm_notify()and doesn't response to IPI fromsmp_call_function_single().[ 988.335937] CPU: 6 PID: 10258 Comm: sh Tainted: G W L 5.8.0-rc6-mainline-16783-gc38daa79b26b-dirty #1 [ 988.346364] Hardware name: Thundercomm Dragonboard 845c (DT) [ 988.352073] pstate: 20400005 (nzCv daif +PAN -UAO BTYPE=--) [ 988.357689] pc : smp_call_function_single+0x158/0x1b8 [ 988.362782] lr : smp_call_function_single+0x124/0x1b8 ... [ 988.451638] Call trace: [ 988.454119] smp_call_function_single+0x158/0x1b8 [ 988.458866] cti_enable+0xb4/0xf8 [coresight_cti] [ 988.463618] coresight_control_assoc_ectdev+0x6c/0x128 [coresight] [ 988.469855] coresight_enable+0x1f0/0x364 [coresight] [ 988.474957] enable_source_store+0x5c/0x9c [coresight] [ 988.480140] dev_attr_store+0x14/0x28 [ 988.483839] sysfs_kf_write+0x38/0x4cQuoted 9 lines
[ 988.487532] kernfs_fop_write+0x1c0/0x2b0 [ 988.491585] vfs_write+0xfc/0x300 [ 988.494931] ksys_write+0x78/0xe0 [ 988.498283] __arm64_sys_write+0x18/0x20 [ 988.502240] el0_svc_common+0x98/0x160 [ 988.506024] do_el0_svc+0x78/0x80 [ 988.509377] el0_sync_handler+0xd4/0x270 [ 988.513337] el0_sync+0x164/0x180Quoted 2 lines
Was this the full log or you did cut some of it?
I cut some CPU registers' value since it's too long and not relevant. The Call trace is full.
Quoted 5 lines
Quoted 4 lines
This change write CTI registers directly in
cti_enable_hw().Config->hw_poweredhas been checked to be true with spinlock holded. CTI is powered and can be programmed until spinlock is released.Quoted 10 lines
From your explanation above it seems that
cti_enable_hw()was called from, say
CPUy, to enable the CTI associated to CPUx. CTIx'sdrvdata->spinlockwas taken
andsmp_call_function_single()called right after. That woke up CPUx andcti_cpu_pm_notify()was executed on CPUx in interrupt context, trying to take
CTIx'sdrvdata->spinlock. That hung CPUx and the kernel got angry. Is my assessment correct?Most of them is correct. The only difference is CPUx is power on when
cti_enable_hw()is called. Otherwise it will gotocti_state_unchanged:
and won't callcti_enable_hw_smp_call().cti_cpu_pm_notify()is called when CPUx tries to suspend instead of resume.Quoted 7 lines
If so I don't think the fix suggested in this patch will work. The same condition will happen whenever
cti_enable_hw()is called on a CPU to enable a
CTI that belongs to another CPU and thatcti_cpu_pm_notify()is called on latter
CPU at the same time.I'm not sure I understand this correctly. Let me clarify it a little bit. It's a deadlock since
cti_enable_hw()holds the spinlock and callscti_enable_hw_smp_call()from CPUx to enable CTI associated to CPUy. It waits forcti_enable_hw_smp_call()to return. IPI is sent to CPUy while CPUy is incti_cpu_pm_notify()and waits for spinlock. In this patch, I removecti_enable_hw_smp_call()and write CTI CPU directly on CPUx. It won't wait for CPUy and release spinlock after program registers of CTI. Aftercti_enable_hw()releases spinlock,cti_cpu_pm_notify()will continue to run. Since spinlock is held andconfig->hw_poweredis true, we don't need to worry about CPUy power down when we program CTI on CPUx.Quoted 8 lines
I think a better solution is to grab the lock in
cti_enable_hw()and check the
value of ->ctidev.cpu. If not a global CPU, i.e >= 0, then release the lock and
callsmp_call_function_single(). Incti_enable_hw_smp_call()take the lock
again and move forward from there.
Quoted 4 lines
After
cti_enable_hw()releases the lock, it's possible that CPU is offline by user,cti_enable_hw_smp_call()will fail in this case.
I took another look at your solution and you are correct, CPUy won't lock but rather spin waiting for cti_enable_hw() to finish on CPUx. To make sure CPUx is not interrupted while executing cti_enable_hw() I suggest to use spin_lock_irq().
Thanks,
Mathieu
Quoted 64 lines
Quoted 4 lines
I have applied the other two patches in this set so no need to send them again.
Thanks,
TingweiQuoted 58 lines
Thanks,
MathieuQuoted 1 line
Fixes 6a0953ce7de9 ("coresight: cti: Add CPU idle pm notifer to CTIdevices")
Review
Quoted 6 lines
Signed-off-by Tingwei Zhang <[email protected]>--- drivers/hwtracing/coresight/coresight-cti.c | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-)(quoted diff) +0
-0
b/drivers/hwtracing/coresight/coresight-cti.cdrivers/hwtracing/coresight/coresight-cti.c void cti_write_all_hw_regs(struct cti_drvdata
Quoted 4 lines
index
3ccc703dc940..869569eb8c7f100644drivers/hwtracing/coresight/coresight-cti.c +0
-0@@ -86,13 +86,6 @@ void cti_write_all_hw_regs(struct cti_drvdata*drvdata)
drivers/hwtracing/coresight/coresight-cti.c static int cti_enable_hw(struct cti_drvdata
Quoted 14 lines
drivers/hwtracing/coresight/coresight-cti.c +0
-7CS_LOCK (drvdata->base); } -static void cti_enable_hw_smp_call (void *info) -{ -struct cti_drvdata *drvdata = info; - -cti_write_all_hw_regs (drvdata); -} -/* write regs to hardware and enable */ static int cti_enable_hw (struct cti_drvdata *drvdata) {@@ -112,15 +105,7 @@ static int cti_enable_hw(struct cti_drvdata*drvdata)
Quoted 18 lines
drivers/hwtracing/coresight/coresight-cti.c +1
-9if (rc) goto cti_err_not_enabled; -if (drvdata->ctidev.cpu >=0 ) { - rc =smp_call_function_single (drvdata->ctidev.cpu, - cti_enable_hw_smp_call, - drvdata,1 ); -if (rc) - goto cti_err_not_enabled; - }else { -cti_write_all_hw_regs (drvdata); - } +cti_write_all_hw_regs (drvdata); config->hw_enabled = true;atomic_inc (&drvdata->config.enable_req_count);Signature · 1 line
The Qualcomm Innovation Center, Inc. is a member of the Code AuroraForum,
Quoted 2 lines
a Linux Foundation Collaborative Project
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH] coresight: cti: write regsiters directly in cti_enable_hw()
Quoted 116 lines · Mathieu Poirier
Quoted 10 lines · Tingwei Zhang
Quoted 9 lines · Mathieu Poirier
Hi Tingwei,
Quoted 6 lines · Tingwei Zhang
Deadlock as below is triggered by one CPU holds
drvdata->spinlockand callscti_enable_hw().Smp_call_function_single()is called incti_enable_hw()and tries to let another CPU write CTI registers. That CPU is trying to getdrvdata->spinlockincti_cpu_pm_notify()and doesn't response to IPI fromsmp_call_function_single().Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
[ 988.335937] CPU: 6 PID: 10258 Comm: sh Tainted: G W L 5.8.0-rc6-mainline-16783-gc38daa79b26b-dirty #1 [ 988.346364] Hardware name: Thundercomm Dragonboard 845c (DT) [ 988.352073] pstate: 20400005 (nzCv daif +PAN -UAO BTYPE=--) [ 988.357689] pc : smp_call_function_single+0x158/0x1b8 [ 988.362782] lr : smp_call_function_single+0x124/0x1b8 ... [ 988.451638] Call trace: [ 988.454119] smp_call_function_single+0x158/0x1b8 [ 988.458866] cti_enable+0xb4/0xf8 [coresight_cti] [ 988.463618] coresight_control_assoc_ectdev+0x6c/0x128[coresight]
Quoted 14 lines
Quoted 14 lines
Quoted 13 lines
[ 988.469855] coresight_enable+0x1f0/0x364 [coresight] [ 988.474957] enable_source_store+0x5c/0x9c [coresight] [ 988.480140] dev_attr_store+0x14/0x28 [ 988.483839] sysfs_kf_write+0x38/0x4c [ 988.487532] kernfs_fop_write+0x1c0/0x2b0 [ 988.491585] vfs_write+0xfc/0x300 [ 988.494931] ksys_write+0x78/0xe0 [ 988.498283] __arm64_sys_write+0x18/0x20 [ 988.502240] el0_svc_common+0x98/0x160 [ 988.506024] do_el0_svc+0x78/0x80 [ 988.509377] el0_sync_handler+0xd4/0x270 [ 988.513337] el0_sync+0x164/0x180Quoted 12 lines
Quoted 2 lines
Was this the full log or you did cut some of it?
I cut some CPU registers' value since it's too long and not relevant. The Call trace is full.
Quoted 6 lines
Quoted 4 lines
This change write CTI registers directly in
cti_enable_hw().Config->hw_poweredhas been checked to be true with spinlock holded. CTI is powered and can be programmed until spinlock is released.From your explanation above it seems that
cti_enable_hw()was calledfrom,
Quoted 2 lines
Quoted 2 lines
say
CPUy, to enable the CTI associated to CPUx. CTIx'sdrvdata->spinlockwas
Quoted 2 lines
Quoted 2 lines
taken
andsmp_call_function_single()called right after. That woke up CPUxand
Quoted 1 line
Quoted 1 line
cti_cpu_pm_notify()was executed on CPUx in interrupt context, tryingto
Quoted 2 lines
Quoted 2 lines
take
CTIx'sdrvdata->spinlock. That hung CPUx and the kernel got angry.Is my
Quoted 9 lines
Quoted 2 lines
assessment correct?
Most of them is correct. The only difference is CPUx is power on when
cti_enable_hw()is called. Otherwise it will gotocti_state_unchanged:
and won't callcti_enable_hw_smp_call().cti_cpu_pm_notify()is called when CPUx tries to suspend instead of resume.Quoted 1 line
If so I don't think the fix suggested in this patch will work. The
same
Quoted 3 lines
Quoted 3 lines
condition will happen whenever
cti_enable_hw()is called on a CPU to enable a
CTI that belongs to another CPU and thatcti_cpu_pm_notify()is calledon
Quoted 5 lines
Quoted 3 lines
latter
CPU at the same time.I'm not sure I understand this correctly. Let me clarify it a little
bit.
Quoted 9 lines
It's a deadlock since
cti_enable_hw()holds the spinlock and callscti_enable_hw_smp_call()from CPUx to enable CTI associated to CPUy. It waits forcti_enable_hw_smp_call()to return. IPI is sent to CPUy while CPUy is incti_cpu_pm_notify()and waits for spinlock. In this patch, I removecti_enable_hw_smp_call()and write CTI CPU directly on CPUx. It won't wait for CPUy and release spinlock after program registers of CTI. Aftercti_enable_hw()releases spinlock,cti_cpu_pm_notify()will continue to run. Since spinlock is held andconfig->hw_poweredis true, we don't need to worry about CPUy power down when we program CTI onCPUx.
Quoted 2 lines
Quoted 2 lines
I think a better solution is to grab the lock in
cti_enable_hw()andcheck
Quoted 2 lines
Quoted 2 lines
the
value of ->ctidev.cpu. If not a global CPU, i.e >= 0, then releasethe
Quoted 7 lines
Quoted 5 lines
lock and
callsmp_call_function_single(). Incti_enable_hw_smp_call()take the lock
again and move forward from there.After
cti_enable_hw()releases the lock, it's possible that CPU isoffline
Quoted 3 lines
by user,
cti_enable_hw_smp_call()will fail in this case.I took another look at your solution and you are correct, CPUy won't lock but
rather spin waiting forcti_enable_hw()to finish on CPUx. To make sure CPUx is
not interrupted while executingcti_enable_hw()I suggest to usespin_lock_irq().
Quoted 3 lines
Thanks,
Mathieu
Sure. I've sent v2 according to your comments.
Quoted 65 lines
Quoted 2 lines
Quoted 2 lines
I have applied the other two patches in this set so no need to send
them
Quoted 62 lines
Quoted 2 lines
again.
Thanks,
TingweiQuoted 58 lines
Thanks,
MathieuQuoted 1 line
Fixes 6a0953ce7de9 ("coresight: cti: Add CPU idle pm notifer to CTIdevices")
Review
Quoted 6 lines
Signed-off-by Tingwei Zhang <[email protected]>--- drivers/hwtracing/coresight/coresight-cti.c | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-)(quoted diff) +0
-0
b/drivers/hwtracing/coresight/coresight-cti.cdrivers/hwtracing/coresight/coresight-cti.c void cti_write_all_hw_regs(struct cti_drvdata
Quoted 4 lines
index
3ccc703dc940..869569eb8c7f100644drivers/hwtracing/coresight/coresight-cti.c +0
-0@@ -86,13 +86,6 @@ void cti_write_all_hw_regs(struct cti_drvdata*drvdata)
drivers/hwtracing/coresight/coresight-cti.c static int cti_enable_hw(struct cti_drvdata
Quoted 14 lines
drivers/hwtracing/coresight/coresight-cti.c +0
-7CS_LOCK (drvdata->base); } -static void cti_enable_hw_smp_call (void *info) -{ -struct cti_drvdata *drvdata = info; - -cti_write_all_hw_regs (drvdata); -} -/* write regs to hardware and enable */ static int cti_enable_hw (struct cti_drvdata *drvdata) {@@ -112,15 +105,7 @@ static int cti_enable_hw(struct cti_drvdata*drvdata)
Quoted 18 lines
drivers/hwtracing/coresight/coresight-cti.c +1
-9if (rc) goto cti_err_not_enabled; -if (drvdata->ctidev.cpu >=0 ) { - rc =smp_call_function_single (drvdata->ctidev.cpu, - cti_enable_hw_smp_call, - drvdata,1 ); -if (rc) - goto cti_err_not_enabled; - }else { -cti_write_all_hw_regs (drvdata); - } +cti_write_all_hw_regs (drvdata); config->hw_enabled = true;atomic_inc (&drvdata->config.enable_req_count);Signature · 1 line
The Qualcomm Innovation Center, Inc. is a member of the Code AuroraForum,
Quoted 2 lines
a Linux Foundation Collaborative Project
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel