Skip to contentSkip to conversation

serial: fsl_lpuart: Fix typo in "transfer"

PATCH New Fabio Estevam 1 participant 1 message Aug 18, 2020 TTY layer and serial drivers

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 serial: fsl_lpuart: Fix typo in "transfer"

Fix two occurrences where "transfer" is spelled incorrectly.

---
 drivers/tty/serial/fsl_lpuart.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/tty/serial/fsl_lpuart.c +2 -2
index 90298c403042..77a1a0b64ddd 100644
@@ -1260,7 +1260,7 @@ static int lpuart_config_rs485(struct uart_port *port,
 		modem |= UARTMODEM_TXRTSE;
 
 		/*
-		 * RTS needs to be logic HIGH either during transer _or_ after
+		 * RTS needs to be logic HIGH either during transfer _or_ after
 		 * transfer, other variants are not supported by the hardware.
 		 */
 
@@ -1311,7 +1311,7 @@ static int lpuart32_config_rs485(struct uart_port *port,
 		modem |= UARTMODEM_TXRTSE;
 
 		/*
-		 * RTS needs to be logic HIGH either during transer _or_ after
+		 * RTS needs to be logic HIGH either during transfer _or_ after
 		 * transfer, other variants are not supported by the hardware.
 		 */
 
Signature · 1 line
2.17.1