Skip to contentSkip to conversation

Generalize start-powered-off property from ARM

PATCH Superseded Thiago Jung Bauermann 2 participants 15 messages Aug 19, 2020

v5 of 7 Superseded Latest is v7 →

lore
Share & tools
lore
#1 lore raw

PATCH v5 1/8 target/arm: Move start-powered-off property to generic CPUState

In reply to Thiago Jung Bauermann

There are other platforms which also have CPUs that start powered off, so generalize the start-powered-off property so that it can be used by them.

Note that ARMv7MState also has a property of the same name but this patch doesn't change it because that class isn't a subclass of CPUState so it wouldn't be a trivial change.

This change should not cause any change in behavior.

---
 exec.c                | 1 +
 include/hw/core/cpu.h | 4 ++++
 target/arm/cpu.c      | 5 ++---
 target/arm/cpu.h      | 3 ---
 target/arm/kvm32.c    | 2 +-
 target/arm/kvm64.c    | 2 +-
 6 files changed, 9 insertions(+), 8 deletions(-)
exec.c +1 -0
index 6f381f98e2..82e82fab09 100644
@@ -899,6 +899,7 @@ Property cpu_common_props[] = {
     DEFINE_PROP_LINK("memory", CPUState, memory, TYPE_MEMORY_REGION,
                      MemoryRegion *),
 #endif
+    DEFINE_PROP_BOOL("start-powered-off", CPUState, start_powered_off, false),
     DEFINE_PROP_END_OF_LIST(),
 };
 
include/hw/core/cpu.h +4 -0
index 8f145733ce..9fc2696db5 100644
@@ -374,6 +374,10 @@ struct CPUState {
     bool created;
     bool stop;
     bool stopped;
+
+    /* Should CPU start in powered-off state? */
+    bool start_powered_off;
+
     bool unplug;
     bool crash_occurred;
     bool exit_request;
target/arm/cpu.c +2 -3
index 111579554f..ec65c7653f 100644
@@ -174,8 +174,8 @@ static void arm_cpu_reset(DeviceState *dev)
     env->vfp.xregs[ARM_VFP_MVFR1] = cpu->isar.mvfr1;
     env->vfp.xregs[ARM_VFP_MVFR2] = cpu->isar.mvfr2;
 
-    cpu->power_state = cpu->start_powered_off ? PSCI_OFF : PSCI_ON;
-    s->halted = cpu->start_powered_off;
+    cpu->power_state = s->start_powered_off ? PSCI_OFF : PSCI_ON;
+    s->halted = s->start_powered_off;
 
     if (arm_feature(env, ARM_FEATURE_IWMMXT)) {
         env->iwmmxt.cregs[ARM_IWMMXT_wCID] = 0x69051000 | 'Q';
@@ -2182,7 +2182,6 @@ static const ARMCPUInfo arm_cpus[] = {
 };
 
 static Property arm_cpu_properties[] = {
-    DEFINE_PROP_BOOL("start-powered-off", ARMCPU, start_powered_off, false),
     DEFINE_PROP_UINT32("psci-conduit", ARMCPU, psci_conduit, 0),
     DEFINE_PROP_UINT64("midr", ARMCPU, midr, 0),
     DEFINE_PROP_UINT64("mp-affinity", ARMCPU,
target/arm/cpu.h +0 -3
index 9e8ed423ea..a925d26996 100644
@@ -810,9 +810,6 @@ struct ARMCPU {
      */
     uint32_t psci_version;
 
-    /* Should CPU start in PSCI powered-off state? */
-    bool start_powered_off;
-
     /* Current power state, access guarded by BQL */
     ARMPSCIState power_state;
 
target/arm/kvm32.c +1 -1
index 0af46b41c8..1f2b8f8b7a 100644
@@ -218,7 +218,7 @@ int kvm_arch_init_vcpu(CPUState *cs)
 
     /* Determine init features for this CPU */
     memset(cpu->kvm_init_features, 0, sizeof(cpu->kvm_init_features));
-    if (cpu->start_powered_off) {
+    if (cs->start_powered_off) {
         cpu->kvm_init_features[0] |= 1 << KVM_ARM_VCPU_POWER_OFF;
     }
     if (kvm_check_extension(cs->kvm_state, KVM_CAP_ARM_PSCI_0_2)) {
target/arm/kvm64.c +1 -1
index 1169237905..f8a6d905fb 100644
@@ -775,7 +775,7 @@ int kvm_arch_init_vcpu(CPUState *cs)
 
     /* Determine init features for this CPU */
     memset(cpu->kvm_init_features, 0, sizeof(cpu->kvm_init_features));
-    if (cpu->start_powered_off) {
+    if (cs->start_powered_off) {
         cpu->kvm_init_features[0] |= 1 << KVM_ARM_VCPU_POWER_OFF;
     }
     if (kvm_check_extension(cs->kvm_state, KVM_CAP_ARM_PSCI_0_2)) {
#2 lore raw

PATCH v5 2/8 target/arm: Move setting of CPU halted state to generic code

In reply to Thiago Jung Bauermann

This change is in a separate patch because it's not so obvious that it won't cause a regression.

---
 hw/core/cpu.c    | 2 +-
 target/arm/cpu.c | 1 -
 2 files changed, 1 insertion(+), 2 deletions(-)
hw/core/cpu.c +1 -1
index 594441a150..71bb7859f1 100644
@@ -258,7 +258,7 @@ static void cpu_common_reset(DeviceState *dev)
     }
 
     cpu->interrupt_request = 0;
-    cpu->halted = 0;
+    cpu->halted = cpu->start_powered_off;
     cpu->mem_io_pc = 0;
     cpu->icount_extra = 0;
     atomic_set(&cpu->icount_decr_ptr->u32, 0);
target/arm/cpu.c +0 -1
index ec65c7653f..b6c65e4df6 100644
@@ -175,7 +175,6 @@ static void arm_cpu_reset(DeviceState *dev)
     env->vfp.xregs[ARM_VFP_MVFR2] = cpu->isar.mvfr2;
 
     cpu->power_state = s->start_powered_off ? PSCI_OFF : PSCI_ON;
-    s->halted = s->start_powered_off;
 
     if (arm_feature(env, ARM_FEATURE_IWMMXT)) {
         env->iwmmxt.cregs[ARM_IWMMXT_wCID] = 0x69051000 | 'Q';
#0 lore raw

v5 cover Generalize start-powered-off property from ARM

This version, like the previous one, tries to fix an issue found by David Gibson when running the Travis CI:

Unexpected error in qdev_prop_set_after_realize() at /home/travis/build/dgibson/qemu/hw/core/qdev-properties.c:30:
qemu-system-mips64el: Attempt to set property 'start-powered-off' on anonymous device (type 'I6400-mips64-cpu') after it was realized Broken pipe
/home/travis/build/dgibson/qemu/tests/qtest/libqtest.c:175: kill_qemu() detected QEMU death from signal 6 (Aborted) (core dumped) Aborted (core dumped)
ERROR qom-test - too few tests run (expected 8, got 0) /home/travis/build/dgibson/qemu/tests/Makefile.include:650: recipe for target 'check-qtest-mips64el' failed

Philippe Mathieu-Daudé spotted the problem:

Quoted 4 lines

Good catch. hw/mips/cps.c, hw/ppc/e500.c and hw/sparc/sun4m.c are incorrectly setting the property after the cpu is realized because the cpu is created with cpu_create(). We need to create them with object_initialize_child() and realize them manually with qdev_realize().

But I found very few examples of CPUs initialized with object_initialize_child() (e.g., atmega.c, rx62n.c, nrf51_soc.c) so instead of using object_initialize_child(), I replaced the call to cpu_create() with object_new() and a call to qdev_realize() shortly after the start-powered-off property is set. I thought this would be the more prudent change, keeping the code as close to the previous one as possible.

I tried reproducing the Travis CI problem with
make docker-test-misc@debian-mips64el-cross but I didn't succeed, so I'm not sure if this version solves the issue.

Applies cleanly on dgibson/ppc-for-5.2.

Original cover letter below, followed by changelog:

The ARM code has a start-powered-off property in ARMCPU, which is a subclass of CPUState. This property causes arm_cpu_reset() to set CPUState::halted to 1, signalling that the CPU should start in a halted state. Other architectures also have code which aim to achieve the same effect, but without using a property.

The ppc/spapr version has a bug where QEMU does a KVM_RUN on the vcpu before cs->halted is set to 1, causing the vcpu to run while it's still in an unitialized state (more details in patch 3).

Peter Maydell mentioned the ARM start-powered-off property and Eduardo Habkost suggested making it generic, so this patch series does that, for all cases which I was able to find via grep in the code.

The only problem is that I was only able to test these changes on a ppc64le pseries KVM guest, so except for patches 2 and 3, all others are only build-tested. Also, my grasp of QOM lifecycle is basically non-existant so please be aware of that when reviewing this series.

The last patch may be wrong, as pointed out by Eduardo, so I marked it as RFC. It may make sense to drop it.

Changes since v4:

Patch "ppc/e500: Use start-powered-off CPUState property" Patch "sparc/sun4m: Use start-powered-off CPUState property"
- Use qdev_realize_and_unref() instead of qdev_realize(), as suggested by Igor.
- Pass &error_fatal to qdev_realize_and_unref() instead of manually reporting the error and exiting QEMU, as suggested by Philippe.
- Changed object_property_set_bool() to use &error_fatal instead of &error_abort.

Patch "mips/cps: Use start-powered-off CPUState property"
- Use qdev_realize_and_unref() instead of qdev_realize(), as suggested by Igor.
- Use existing errp argument to propagate error back to the caller, as suggested by Philippe.
- Changed object_property_set_bool() to use existing errp argument to propagate error back to the caller instead of using &error_abort.

Changes since v3:

General:
- Added David's, Greg's and Cornelia's Reviewed-by and Acked-by to some of the patches.
- Rebased on top of dgibson/ppc-for-5.2.

Patch "ppc/e500: Use start-powered-off CPUState property" Patch "mips/cps: Use start-powered-off CPUState property" Patch "sparc/sun4m: Use start-powered-off CPUState property"
- Initialize CPU object with object_new() and qdev_realize() instead of cpu_create().
- Removed Reviewed-by's and Acked-by's from these patches because of these changes.

Changes since v2:

General:
- Added Philippe's Reviewed-by to some of the patches.

Patch "ppc/spapr: Use start-powered-off CPUState property"
- Set the CPUState::start_powered_off variable directly rather than using object_property_set_bool(). Suggested by Philippe.

Patch "sparc/sun4m: Remove main_cpu_reset()"
- New patch. Suggested by Philippe.

Patch "sparc/sun4m: Use start-powered-off CPUState property"
- Remove secondary_cpu_reset(). Suggested by Philippe.
- Remove setting of cs->halted = 1 from cpu_devinit(). Suggested by Philippe.

Patch "Don't set CPUState::halted in cpu_devinit()"
- Squashed into previous patch. Suggested by Philippe.

Patch "sparc/sun4m: Use one cpu_reset() function for main and secondary CPUs"
- Dropped.

Patch "target/s390x: Use start-powered-off CPUState property"
- Set the CPUState::start_powered_off variable directly rather than using object_property_set_bool(). Suggested by Philippe.
- Mention in the commit message Eduardo's observation that before this patch, the code didn't set cs->halted on reset.

Thiago Jung Bauermann (8):
target/arm: Move start-powered-off property to generic CPUState target/arm: Move setting of CPU halted state to generic code ppc/spapr: Use start-powered-off CPUState property ppc/e500: Use start-powered-off CPUState property mips/cps: Use start-powered-off CPUState property sparc/sun4m: Remove main_cpu_reset()
sparc/sun4m: Use start-powered-off CPUState property target/s390x: Use start-powered-off CPUState property

 exec.c                  |  1 +
 hw/core/cpu.c           |  2 +-
 hw/mips/cps.c           | 14 ++++++++++----
 hw/ppc/e500.c           | 14 ++++++++++----
 hw/ppc/spapr_cpu_core.c | 10 +++++-----
 hw/sparc/sun4m.c        | 32 +++++---------------------------
 include/hw/core/cpu.h   |  4 ++++
 target/arm/cpu.c        |  4 +---
 target/arm/cpu.h        |  3 ---
 target/arm/kvm32.c      |  2 +-
 target/arm/kvm64.c      |  2 +-
 target/s390x/cpu.c      |  2 +-
 12 files changed, 40 insertions(+), 50 deletions(-)
#3 lore raw

PATCH v5 3/8 ppc/spapr: Use start-powered-off CPUState property

PowerPC sPAPR CPUs start in the halted state, and spapr_reset_vcpu() attempts to implement this by setting CPUState::halted to 1. But that's too late for the case of hotplugged CPUs in a machine configure with 2 or more threads per core.

By then, other parts of QEMU have already caused the vCPU to run in an unitialized state a couple of times. For example, ppc_cpu_reset() calls ppc_tlb_invalidate_all(), which ends up calling async_run_on_cpu(). This kicks the new vCPU while it has CPUState::halted = 0, causing QEMU to issue a KVM_RUN ioctl on the new vCPU before the guest is able to make the start-cpu RTAS call to initialize its register state.

This problem doesn't seem to cause visible issues for regular guests, but on a secure guest running under the Ultravisor it does. The Ultravisor relies on being able to snoop on the start-cpu RTAS call to map vCPUs to guests, and this issue causes it to see a stray vCPU that doesn't belong to any guest.

Fix by setting the start-powered-off CPUState property in spapr_create_vcpu(), which makes cpu_common_reset() initialize CPUState::halted to 1 at an earlier moment.

---
 hw/ppc/spapr_cpu_core.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
hw/ppc/spapr_cpu_core.c +5 -5
index c4f47dcc04..2125fdac34 100644
@@ -36,11 +36,6 @@ static void spapr_reset_vcpu(PowerPCCPU *cpu)
 
     cpu_reset(cs);
 
-    /* All CPUs start halted.  CPU0 is unhalted from the machine level
-     * reset code and the rest are explicitly started up by the guest
-     * using an RTAS call */
-    cs->halted = 1;
-
     env->spr[SPR_HIOR] = 0;
 
     lpcr = env->spr[SPR_LPCR];
@@ -274,6 +269,11 @@ static PowerPCCPU *spapr_create_vcpu(SpaprCpuCore *sc, int i, Error **errp)
 
     cs = CPU(obj);
     cpu = POWERPC_CPU(obj);
+    /*
+     * All CPUs start halted. CPU0 is unhalted from the machine level reset code
+     * and the rest are explicitly started up by the guest using an RTAS call.
+     */
+    cs->start_powered_off = true;
     cs->cpu_index = cc->core_id + i;
     spapr_set_vcpu_id(cpu, cs->cpu_index, &local_err);
     if (local_err) {
#4 lore raw

PATCH v5 4/8 ppc/e500: Use start-powered-off CPUState property

In reply to Thiago Jung Bauermann

Instead of setting CPUState::halted to 1 in ppce500_cpu_reset_sec(), use the start-powered-off property which makes cpu_common_reset() initialize it to 1 in common code.

Also change creation of CPU object from cpu_create() to object_new() and qdev_realize_and_unref() because cpu_create() realizes the CPU and it's not possible to set a property after the object is realized.

---
 hw/ppc/e500.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)
hw/ppc/e500.c +10 -4
index ab9884e315..d7b803ef26 100644
@@ -704,9 +704,6 @@ static void ppce500_cpu_reset_sec(void *opaque)
 
     cpu_reset(cs);
 
-    /* Secondary CPU starts in halted state for now. Needs to change when
-       implementing non-kernel boot. */
-    cs->halted = 1;
     cs->exception_index = EXCP_HLT;
 }
 
@@ -865,7 +862,7 @@ void ppce500_init(MachineState *machine)
         CPUState *cs;
         qemu_irq *input;
 
-        cpu = POWERPC_CPU(cpu_create(machine->cpu_type));
+        cpu = POWERPC_CPU(object_new(machine->cpu_type));
         env = &cpu->env;
         cs = CPU(cpu);
 
@@ -897,7 +894,16 @@ void ppce500_init(MachineState *machine)
         } else {
             /* Secondary CPUs */
             qemu_register_reset(ppce500_cpu_reset_sec, cpu);
+
+            /*
+             * Secondary CPU starts in halted state for now. Needs to change
+             * when implementing non-kernel boot.
+             */
+            object_property_set_bool(OBJECT(cs), "start-powered-off", true,
+                                     &error_fatal);
         }
+
+        qdev_realize_and_unref(DEVICE(cs), NULL, &error_fatal);
     }
 
     env = firstenv;
#8 lore raw

PATCH v5 6/8 sparc/sun4m: Remove main_cpu_reset()

In reply to Thiago Jung Bauermann

We rely on cpu_common_reset() to set cs->halted to 0, so main_cpu_reset() is pointless.

---
 hw/sparc/sun4m.c | 13 +------------
 1 file changed, 1 insertion(+), 12 deletions(-)
hw/sparc/sun4m.c +1 -12
index cf7dfa4af5..22c51dac8a 100644
@@ -218,15 +218,6 @@ static void dummy_cpu_set_irq(void *opaque, int irq, int level)
 {
 }
 
-static void main_cpu_reset(void *opaque)
-{
-    SPARCCPU *cpu = opaque;
-    CPUState *cs = CPU(cpu);
-
-    cpu_reset(cs);
-    cs->halted = 0;
-}
-
 static void secondary_cpu_reset(void *opaque)
 {
     SPARCCPU *cpu = opaque;
@@ -827,9 +818,7 @@ static void cpu_devinit(const char *cpu_type, unsigned int id,
     env = &cpu->env;
 
     cpu_sparc_set_id(env, id);
-    if (id == 0) {
-        qemu_register_reset(main_cpu_reset, cpu);
-    } else {
+    if (id != 0) {
         qemu_register_reset(secondary_cpu_reset, cpu);
         cs = CPU(cpu);
         cs->halted = 1;
#6 lore raw

PATCH v5 5/8 mips/cps: Use start-powered-off CPUState property

In reply to Thiago Jung Bauermann

Instead of setting CPUState::halted to 1 in main_cpu_reset(), use the start-powered-off property which makes cpu_common_reset() initialize it to 1 in common code.

Also change creation of CPU object from cpu_create() to object_new() and qdev_realize_and_unref() because cpu_create() realizes the CPU and it's not possible to set a property after the object is realized.

---
 hw/mips/cps.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)
hw/mips/cps.c +10 -4
index 615e1a1ad2..4a98cf2287 100644
@@ -52,9 +52,6 @@ static void main_cpu_reset(void *opaque)
     CPUState *cs = CPU(cpu);
 
     cpu_reset(cs);
-
-    /* All VPs are halted on reset. Leave powering up to CPC. */
-    cs->halted = 1;
 }
 
 static bool cpu_mips_itu_supported(CPUMIPSState *env)
@@ -76,7 +73,7 @@ static void mips_cps_realize(DeviceState *dev, Error **errp)
     bool saar_present = false;
 
     for (i = 0; i < s->num_vp; i++) {
-        cpu = MIPS_CPU(cpu_create(s->cpu_type));
+        cpu = MIPS_CPU(object_new(s->cpu_type));
 
         /* Init internal devices */
         cpu_mips_irq_init_cpu(cpu);
@@ -89,7 +86,16 @@ static void mips_cps_realize(DeviceState *dev, Error **errp)
             env->itc_tag = mips_itu_get_tag_region(&s->itu);
             env->itu = &s->itu;
         }
+        /* All VPs are halted on reset. Leave powering up to CPC. */
+        if (!object_property_set_bool(OBJECT(cpu), "start-powered-off", true,
+                                      errp)) {
+            return;
+        }
         qemu_register_reset(main_cpu_reset, cpu);
+
+        if (!qdev_realize_and_unref(DEVICE(cpu), NULL, errp)) {
+            return;
+        }
     }
 
     cpu = MIPS_CPU(first_cpu);
#10 lore raw

PATCH v5 7/8 sparc/sun4m: Use start-powered-off CPUState property

In reply to Thiago Jung Bauermann

Instead of setting CPUState::halted to 1 in secondary_cpu_reset(), use the start-powered-off property which makes cpu_common_reset() initialize it to 1 in common code.

This makes secondary_cpu_reset() unnecessary, so remove it.

Also remove setting of cs->halted from cpu_devinit(), which seems out of place when compared to similar code in other architectures (e.g., ppce500_init() in hw/ppc/e500.c).

Finally, change creation of CPU object from cpu_create() to object_new() and qdev_realize_and_unref() because cpu_create() realizes the CPU and it's not possible to set a property after the object is realized.

---
 hw/sparc/sun4m.c | 21 +++++----------------
 1 file changed, 5 insertions(+), 16 deletions(-)
hw/sparc/sun4m.c +5 -16
index 22c51dac8a..1925f415e7 100644
@@ -218,15 +218,6 @@ static void dummy_cpu_set_irq(void *opaque, int irq, int level)
 {
 }
 
-static void secondary_cpu_reset(void *opaque)
-{
-    SPARCCPU *cpu = opaque;
-    CPUState *cs = CPU(cpu);
-
-    cpu_reset(cs);
-    cs->halted = 1;
-}
-
 static void cpu_halt_signal(void *opaque, int irq, int level)
 {
     if (level && current_cpu) {
@@ -810,21 +801,19 @@ static const TypeInfo ram_info = {
 static void cpu_devinit(const char *cpu_type, unsigned int id,
                         uint64_t prom_addr, qemu_irq **cpu_irqs)
 {
-    CPUState *cs;
     SPARCCPU *cpu;
     CPUSPARCState *env;
 
-    cpu = SPARC_CPU(cpu_create(cpu_type));
+    cpu = SPARC_CPU(object_new(cpu_type));
     env = &cpu->env;
 
     cpu_sparc_set_id(env, id);
-    if (id != 0) {
-        qemu_register_reset(secondary_cpu_reset, cpu);
-        cs = CPU(cpu);
-        cs->halted = 1;
-    }
+    object_property_set_bool(OBJECT(cpu), "start-powered-off", id != 0,
+                             &error_fatal);
     *cpu_irqs = qemu_allocate_irqs(cpu_set_irq, cpu, MAX_PILS);
     env->prom_addr = prom_addr;
+
+    qdev_realize_and_unref(DEVICE(cpu), NULL, &error_fatal);
 }
 
 static void dummy_fdc_tc(void *opaque, int irq, int level)
#13 lore raw

PATCH v5 8/8 target/s390x: Use start-powered-off CPUState property

In reply to Thiago Jung Bauermann

Instead of setting CPUState::halted to 1 in s390_cpu_initfn(), use the start-powered-off property which makes cpu_common_reset() initialize it to 1 in common code.

Note that this changes behavior by setting cs->halted to 1 on reset, which didn't happen before.

---
 target/s390x/cpu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
target/s390x/cpu.c +1 -1
index 08eb674d22..73d7d6007e 100644
@@ -291,7 +291,7 @@ static void s390_cpu_initfn(Object *obj)
     S390CPU *cpu = S390_CPU(obj);
 
     cpu_set_cpustate_pointers(cpu);
-    cs->halted = 1;
+    cs->start_powered_off = true;
     cs->exception_index = EXCP_HLT;
 #if !defined(CONFIG_USER_ONLY)
     object_property_add(obj, "crash-information", "GuestPanicInformation",
Reviewed-by on v5 4/8
#5 lore raw

Re: [PATCH v5 4/8] ppc/e500: Use start-powered-off CPUState property

In reply to Thiago Jung Bauermann
Quoted 9 lines · Thiago Jung Bauermann

Instead of setting CPUState::halted to 1 in ppce500_cpu_reset_sec(), use the start-powered-off property which makes cpu_common_reset() initialize it to 1 in common code.

Also change creation of CPU object from cpu_create() to object_new() and qdev_realize_and_unref() because cpu_create() realizes the CPU and it's not possible to set a property after the object is realized.

Quoted 45 lines
---
 hw/ppc/e500.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)
hw/ppc/e500.c +10 -4
index ab9884e315..d7b803ef26 100644
@@ -704,9 +704,6 @@ static void ppce500_cpu_reset_sec(void *opaque)
 
     cpu_reset(cs);
 
-    /* Secondary CPU starts in halted state for now. Needs to change when
-       implementing non-kernel boot. */
-    cs->halted = 1;
     cs->exception_index = EXCP_HLT;
 }
 
@@ -865,7 +862,7 @@ void ppce500_init(MachineState *machine)
         CPUState *cs;
         qemu_irq *input;
 
-        cpu = POWERPC_CPU(cpu_create(machine->cpu_type));
+        cpu = POWERPC_CPU(object_new(machine->cpu_type));
         env = &cpu->env;
         cs = CPU(cpu);
 
@@ -897,7 +894,16 @@ void ppce500_init(MachineState *machine)
         } else {
             /* Secondary CPUs */
             qemu_register_reset(ppce500_cpu_reset_sec, cpu);
+
+            /*
+             * Secondary CPU starts in halted state for now. Needs to change
+             * when implementing non-kernel boot.
+             */
+            object_property_set_bool(OBJECT(cs), "start-powered-off", true,
+                                     &error_fatal);
         }
+
+        qdev_realize_and_unref(DEVICE(cs), NULL, &error_fatal);
     }
 
     env = firstenv;
Reviewed-by on v5 5/8
#7 lore raw

Re: [PATCH v5 5/8] mips/cps: Use start-powered-off CPUState property

In reply to Thiago Jung Bauermann
Quoted 37 lines · Thiago Jung Bauermann

Instead of setting CPUState::halted to 1 in main_cpu_reset(), use the start-powered-off property which makes cpu_common_reset() initialize it to 1 in common code.

Also change creation of CPU object from cpu_create() to object_new() and qdev_realize_and_unref() because cpu_create() realizes the CPU and it's not possible to set a property after the object is realized.

---
 hw/mips/cps.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)
hw/mips/cps.c +1 -4
index 615e1a1ad2..4a98cf2287 100644
@@ -52,9 +52,6 @@ static void main_cpu_reset(void *opaque)
     CPUState *cs = CPU(cpu);
 
     cpu_reset(cs);
-
-    /* All VPs are halted on reset. Leave powering up to CPC. */
-    cs->halted = 1;
 }
 
 static bool cpu_mips_itu_supported(CPUMIPSState *env)
@@ -76,7 +73,7 @@ static void mips_cps_realize(DeviceState *dev, Error **errp)
     bool saar_present = false;
 
     for (i = 0; i < s->num_vp; i++) {
-        cpu = MIPS_CPU(cpu_create(s->cpu_type));
+        cpu = MIPS_CPU(object_new(s->cpu_type));
 
         /* Init internal devices */
         cpu_mips_irq_init_cpu(cpu);

hw/mips/cps.c static void mips_cps_realize(DeviceState *dev, Error **errp) · line 92

Quoted 7 lines
hw/mips/cps.c +4 -0
@@ -89,7 +86,16 @@ static void mips_cps_realize(DeviceState *dev, Error **errp)
             env->itc_tag = mips_itu_get_tag_region(&s->itu);
             env->itu = &s->itu;
         }
+        /* All VPs are halted on reset. Leave powering up to CPC. */
+        if (!object_property_set_bool(OBJECT(cpu), "start-powered-off", true,
+                                      errp)) {
+            return;

Ah, better :)

Quoted 10 lines
hw/mips/cps.c +5 -0
+        }
         qemu_register_reset(main_cpu_reset, cpu);
+
+        if (!qdev_realize_and_unref(DEVICE(cpu), NULL, errp)) {
+            return;
+        }
     }
 
     cpu = MIPS_CPU(first_cpu);
Reviewed-by on v5 6/8
#9 lore raw

Re: [PATCH v5 6/8] sparc/sun4m: Remove main_cpu_reset()

In reply to Thiago Jung Bauermann
Quoted 6 lines · Thiago Jung Bauermann

We rely on cpu_common_reset() to set cs->halted to 0, so main_cpu_reset() is pointless.

Quoted 36 lines
---
 hw/sparc/sun4m.c | 13 +------------
 1 file changed, 1 insertion(+), 12 deletions(-)
hw/sparc/sun4m.c +1 -12
index cf7dfa4af5..22c51dac8a 100644
@@ -218,15 +218,6 @@ static void dummy_cpu_set_irq(void *opaque, int irq, int level)
 {
 }
 
-static void main_cpu_reset(void *opaque)
-{
-    SPARCCPU *cpu = opaque;
-    CPUState *cs = CPU(cpu);
-
-    cpu_reset(cs);
-    cs->halted = 0;
-}
-
 static void secondary_cpu_reset(void *opaque)
 {
     SPARCCPU *cpu = opaque;
@@ -827,9 +818,7 @@ static void cpu_devinit(const char *cpu_type, unsigned int id,
     env = &cpu->env;
 
     cpu_sparc_set_id(env, id);
-    if (id == 0) {
-        qemu_register_reset(main_cpu_reset, cpu);
-    } else {
+    if (id != 0) {
         qemu_register_reset(secondary_cpu_reset, cpu);
         cs = CPU(cpu);
         cs->halted = 1;
#11 lore raw

Re: [PATCH v5 7/8] sparc/sun4m: Use start-powered-off CPUState property

In reply to Thiago Jung Bauermann
Quoted 50 lines · Thiago Jung Bauermann

Instead of setting CPUState::halted to 1 in secondary_cpu_reset(), use the start-powered-off property which makes cpu_common_reset() initialize it to 1 in common code.

This makes secondary_cpu_reset() unnecessary, so remove it.

Also remove setting of cs->halted from cpu_devinit(), which seems out of place when compared to similar code in other architectures (e.g., ppce500_init() in hw/ppc/e500.c).

Finally, change creation of CPU object from cpu_create() to object_new() and qdev_realize_and_unref() because cpu_create() realizes the CPU and it's not possible to set a property after the object is realized.

---
 hw/sparc/sun4m.c | 21 +++++----------------
 1 file changed, 5 insertions(+), 16 deletions(-)
hw/sparc/sun4m.c +1 -11
index 22c51dac8a..1925f415e7 100644
@@ -218,15 +218,6 @@ static void dummy_cpu_set_irq(void *opaque, int irq, int level)
 {
 }
 
-static void secondary_cpu_reset(void *opaque)
-{
-    SPARCCPU *cpu = opaque;
-    CPUState *cs = CPU(cpu);
-
-    cpu_reset(cs);
-    cs->halted = 1;
-}
-
 static void cpu_halt_signal(void *opaque, int irq, int level)
 {
     if (level && current_cpu) {
@@ -810,21 +801,19 @@ static const TypeInfo ram_info = {
 static void cpu_devinit(const char *cpu_type, unsigned int id,
                         uint64_t prom_addr, qemu_irq **cpu_irqs)
 {
-    CPUState *cs;
     SPARCCPU *cpu;
     CPUSPARCState *env;
 
-    cpu = SPARC_CPU(cpu_create(cpu_type));
+    cpu = SPARC_CPU(object_new(cpu_type));

hw/sparc/sun4m.c static const TypeInfo ram_info = { · line 812

Quoted 10 lines
hw/sparc/sun4m.c +2 -5
     env = &cpu->env;
 
     cpu_sparc_set_id(env, id);
-    if (id != 0) {
-        qemu_register_reset(secondary_cpu_reset, cpu);
-        cs = CPU(cpu);
-        cs->halted = 1;
-    }
+    object_property_set_bool(OBJECT(cpu), "start-powered-off", id != 0,
+                             &error_fatal);

Why not call here:

       qdev_realize_and_unref(DEVICE(cpu), NULL, &error_fatal);

?

Quoted 8 lines
hw/sparc/sun4m.c +2 -0
     *cpu_irqs = qemu_allocate_irqs(cpu_set_irq, cpu, MAX_PILS);
     env->prom_addr = prom_addr;
+
+    qdev_realize_and_unref(DEVICE(cpu), NULL, &error_fatal);
 }
 
 static void dummy_fdc_tc(void *opaque, int irq, int level)
Reviewed-by on v5 8/8
#14 lore raw

Re: [PATCH v5 8/8] target/s390x: Use start-powered-off CPUState property

In reply to Thiago Jung Bauermann
Quoted 9 lines · Thiago Jung Bauermann

Instead of setting CPUState::halted to 1 in s390_cpu_initfn(), use the start-powered-off property which makes cpu_common_reset() initialize it to 1 in common code.

Note that this changes behavior by setting cs->halted to 1 on reset, which didn't happen before.

Quoted 18 lines
---
 target/s390x/cpu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
target/s390x/cpu.c +1 -1
index 08eb674d22..73d7d6007e 100644
@@ -291,7 +291,7 @@ static void s390_cpu_initfn(Object *obj)
     S390CPU *cpu = S390_CPU(obj);
 
     cpu_set_cpustate_pointers(cpu);
-    cs->halted = 1;
+    cs->start_powered_off = true;
     cs->exception_index = EXCP_HLT;
 #if !defined(CONFIG_USER_ONLY)
     object_property_add(obj, "crash-information", "GuestPanicInformation",
#12 lore raw

Re: [PATCH v5 7/8] sparc/sun4m: Use start-powered-off CPUState property

In reply to Philippe Mathieu-Daudé

Hi Philippe,

Quoted 64 lines · Philippe Mathieu-Daudé
Quoted 50 lines · Thiago Jung Bauermann

Instead of setting CPUState::halted to 1 in secondary_cpu_reset(), use the start-powered-off property which makes cpu_common_reset() initialize it to 1 in common code.

This makes secondary_cpu_reset() unnecessary, so remove it.

Also remove setting of cs->halted from cpu_devinit(), which seems out of place when compared to similar code in other architectures (e.g., ppce500_init() in hw/ppc/e500.c).

Finally, change creation of CPU object from cpu_create() to object_new() and qdev_realize_and_unref() because cpu_create() realizes the CPU and it's not possible to set a property after the object is realized.

---
 hw/sparc/sun4m.c | 21 +++++----------------
 1 file changed, 5 insertions(+), 16 deletions(-)
hw/sparc/sun4m.c +1 -11
index 22c51dac8a..1925f415e7 100644
@@ -218,15 +218,6 @@ static void dummy_cpu_set_irq(void *opaque, int irq, int level)
 {
 }
 
-static void secondary_cpu_reset(void *opaque)
-{
-    SPARCCPU *cpu = opaque;
-    CPUState *cs = CPU(cpu);
-
-    cpu_reset(cs);
-    cs->halted = 1;
-}
-
 static void cpu_halt_signal(void *opaque, int irq, int level)
 {
     if (level && current_cpu) {
@@ -810,21 +801,19 @@ static const TypeInfo ram_info = {
 static void cpu_devinit(const char *cpu_type, unsigned int id,
                         uint64_t prom_addr, qemu_irq **cpu_irqs)
 {
-    CPUState *cs;
     SPARCCPU *cpu;
     CPUSPARCState *env;
 
-    cpu = SPARC_CPU(cpu_create(cpu_type));
+    cpu = SPARC_CPU(object_new(cpu_type));

hw/sparc/sun4m.c static const TypeInfo ram_info = { · line 812

Quoted 10 lines
hw/sparc/sun4m.c +2 -5
     env = &cpu->env;
 
     cpu_sparc_set_id(env, id);
-    if (id != 0) {
-        qemu_register_reset(secondary_cpu_reset, cpu);
-        cs = CPU(cpu);
-        cs->halted = 1;
-    }
+    object_property_set_bool(OBJECT(cpu), "start-powered-off", id != 0,
+                             &error_fatal);

Why not call here:

Quoted 3 lines
       qdev_realize_and_unref(DEVICE(cpu), NULL, &error_fatal);

?

I can do that. I was unsure about whether qemu_allocate_irqs() could come after realize, but now that you pointed it out it obviously can since this code was working with cpu_create(). I'll send a v6 with that change.

Quoted 8 lines

hw/sparc/sun4m.c static const TypeInfo ram_info = { · line 819

Quoted 8 lines
hw/sparc/sun4m.c +2 -0
     *cpu_irqs = qemu_allocate_irqs(cpu_set_irq, cpu, MAX_PILS);
     env->prom_addr = prom_addr;
+
+    qdev_realize_and_unref(DEVICE(cpu), NULL, &error_fatal);
 }
 
 static void dummy_fdc_tc(void *opaque, int irq, int level)

--
Thiago Jung Bauermann
IBM Linux Technology Center