Skip to contentSkip to conversation

4.14.194-rc1 review

PATCH In review Greg Kroah-Hartman 3 participants 234 messages Aug 20, 2020 – Aug 21, 2020 Page 1 of 2

Subsystems (5)
lore
Share & tools
lore
author maintainer
#13 lore raw

PATCH 13/228 vgacon: Fix for missing check in scrollback handling

In reply to Greg Kroah-Hartman

From: Yunhai Zhang <[email protected]>

commit ebfdfeeae8c01fcb2b3b74ffaf03876e20835d2d upstream.

vgacon_scrollback_update() always leaves enbough room in the scrollback buffer for the next call, but if the console size changed that room might not actually be enough, and so we need to re-check.

The check should be in the loop since vgacon_scrollback_cur->tail is updated in the loop and count may be more than 1 when triggered by CSI M, as Jiri's PoC:
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <fcntl.h>

int main(int argc, char** argv)

{
        int fd = open("/dev/tty1", O_RDWR);
        unsigned short size[3] = {25, 200, 0};
        ioctl(fd, 0x5609, size); // VT_RESIZE

        write(fd, "\e[1;1H", 6);
        for (int i = 0; i < 30; i++)
                write(fd, "\e[10M", 5);
}

It leads to various crashes as vgacon_scrollback_update writes out of the buffer:

 BUG: unable to handle page fault for address: ffffc900001752a0
 #PF: supervisor write access in kernel mode
 #PF: error_code(0x0002) - not-present page
 RIP: 0010:mutex_unlock+0x13/0x30
...
 Call Trace:
  n_tty_write+0x1a0/0x4d0
  tty_write+0x1a0/0x2e0

Or to KASAN reports:

BUG: KASAN: slab-out-of-bounds in vgacon_scroll+0x57a/0x8ed

This fixes CVE-2020-14331.

Fixes 15bdab959c9b ([PATCH] vgacon: Add support for soft scrollback)
Cc Linus Torvalds <[email protected]>
Cc Solar Designer <[email protected]>
Cc "Srivatsa S. Bhat" <[email protected]>
Cc Anthony Liguori <[email protected]>
Cc Yang Yingliang <[email protected]>
Cc Bartlomiej Zolnierkiewicz <[email protected]>
Cc Jiri Slaby <[email protected]>
---
 drivers/video/console/vgacon.c |    4 ++++
 1 file changed, 4 insertions(+)
drivers/video/console/vgacon.c +4 -0
@@ -246,6 +246,10 @@ static void vgacon_scrollback_update(str
 	p = (void *) (c->vc_origin + t * c->vc_size_row);
 
 	while (count--) {
+		if ((vgacon_scrollback_cur->tail + c->vc_size_row) >
+		    vgacon_scrollback_cur->size)
+			vgacon_scrollback_cur->tail = 0;
+
 		scr_memcpyw(vgacon_scrollback_cur->data +
 			    vgacon_scrollback_cur->tail,
 			    p, c->vc_size_row);
author maintainer
#15 lore raw

PATCH 15/228 leds: wm831x-status: fix use-after-free on unbind

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit 47a459ecc800a17109d0c496a4e21e478806ee40 upstream.

Several MFD child drivers register their class devices directly under the parent device. This means you cannot blindly do devres conversions so that deregistration ends up being tied to the parent device, something which leads to use-after-free on driver unbind when the class device is released while still being registered.

Fixes 8d3b6a4001ce ("leds: wm831x-status: Use devm_led_classdev_register")
Cc stable <[email protected]> # 4.6
Cc Amitoj Kaur Chawla <[email protected]>
---
 drivers/leds/leds-wm831x-status.c |   14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)
drivers/leds/leds-wm831x-status.c +13 -1
@@ -283,12 +283,23 @@ static int wm831x_status_probe(struct pl
 	drvdata->cdev.blink_set = wm831x_status_blink_set;
 	drvdata->cdev.groups = wm831x_status_groups;
 
-	ret = devm_led_classdev_register(wm831x->dev, &drvdata->cdev);
+	ret = led_classdev_register(wm831x->dev, &drvdata->cdev);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Failed to register LED: %d\n", ret);
 		return ret;
 	}
 
+	platform_set_drvdata(pdev, drvdata);
+
+	return 0;
+}
+
+static int wm831x_status_remove(struct platform_device *pdev)
+{
+	struct wm831x_status *drvdata = platform_get_drvdata(pdev);
+
+	led_classdev_unregister(&drvdata->cdev);
+
 	return 0;
 }
 
@@ -297,6 +308,7 @@ static struct platform_driver wm831x_sta
 		   .name = "wm831x-status",
 		   },
 	.probe = wm831x_status_probe,
+	.remove = wm831x_status_remove,
 };
 
 module_platform_driver(wm831x_status_driver);
author maintainer
#2 lore raw

PATCH 2/228 net/mlx5e: Dont support phys switch id if not in switchdev mode

In reply to Greg Kroah-Hartman

From: Roi Dayan <[email protected]>

Support for phys switch id ndo added for representors and if we do not have representors there is no need to support it. Since each port return different switch id supporting this block support for creating bond over PFs and attaching to bridge in legacy mode.

This bug doesn't exist upstream as the code got refactored and the netdev api is totally different.

Fixes cb67b832921c ("net/mlx5e: Introduce SRIOV VF representors")
---
 drivers/net/ethernet/mellanox/mlx5/core/en_rep.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +1 -1
@@ -180,7 +180,7 @@ int mlx5e_attr_get(struct net_device *de
 	struct mlx5_eswitch_rep *rep = rpriv->rep;
 	struct mlx5_eswitch *esw = priv->mdev->priv.eswitch;
 
-	if (esw->mode == SRIOV_NONE)
+	if (esw->mode != SRIOV_OFFLOADS)
 		return -EOPNOTSUPP;
 
 	switch (attr->id) {
author maintainer
#8 lore raw

PATCH 8/228 Bluetooth: Fix slab-out-of-bounds read in hci_extended_inquiry_result_evt()

In reply to Greg Kroah-Hartman

From: Peilin Ye <[email protected]>

commit 51c19bf3d5cfaa66571e4b88ba2a6f6295311101 upstream.

Check upon num_rsp is insufficient. A malformed event packet with a large num_rsp number makes hci_extended_inquiry_result_evt() go out of bounds. Fix it.

This patch fixes the following syzbot bug:

    https://syzkaller.appspot.com/bug?id=4bf11aa05c4ca51ce0df86e500fce486552dc8d2
---
 net/bluetooth/hci_event.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/bluetooth/hci_event.c +1 -1
@@ -3826,7 +3826,7 @@ static void hci_extended_inquiry_result_
 
 	BT_DBG("%s num_rsp %d", hdev->name, num_rsp);
 
-	if (!num_rsp)
+	if (!num_rsp || skb->len < num_rsp * sizeof(*info) + 1)
 		return;
 
 	if (hci_dev_test_flag(hdev, HCI_PERIODIC_INQ))
author maintainer
#17 lore raw

PATCH 17/228 leds: lm3533: fix use-after-free on unbind

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit d584221e683bbd173738603b83a315f27d27d043 upstream.

Several MFD child drivers register their class devices directly under the parent device. This means you cannot blindly do devres conversions so that deregistration ends up being tied to the parent device, something which leads to use-after-free on driver unbind when the class device is released while still being registered.

Fixes 50154e29e5cc ("leds: lm3533: Use devm_led_classdev_register")
Cc stable <[email protected]> # 4.6
Cc Amitoj Kaur Chawla <[email protected]>
---
 drivers/leds/leds-lm3533.c |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
drivers/leds/leds-lm3533.c +9 -3
@@ -698,7 +698,7 @@ static int lm3533_led_probe(struct platf
 
 	platform_set_drvdata(pdev, led);
 
-	ret = devm_led_classdev_register(pdev->dev.parent, &led->cdev);
+	ret = led_classdev_register(pdev->dev.parent, &led->cdev);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register LED %d\n", pdev->id);
 		return ret;
@@ -708,13 +708,18 @@ static int lm3533_led_probe(struct platf
 
 	ret = lm3533_led_setup(led, pdata);
 	if (ret)
-		return ret;
+		goto err_deregister;
 
 	ret = lm3533_ctrlbank_enable(&led->cb);
 	if (ret)
-		return ret;
+		goto err_deregister;
 
 	return 0;
+
+err_deregister:
+	led_classdev_unregister(&led->cdev);
+
+	return ret;
 }
 
 static int lm3533_led_remove(struct platform_device *pdev)
@@ -724,6 +729,7 @@ static int lm3533_led_remove(struct plat
 	dev_dbg(&pdev->dev, "%s\n", __func__);
 
 	lm3533_ctrlbank_disable(&led->cb);
+	led_classdev_unregister(&led->cdev);
 
 	return 0;
 }
author maintainer
#5 lore raw

PATCH 5/228 usb: xhci: Fix ASMedia ASM1142 DMA addressing

In reply to Greg Kroah-Hartman

From: Forest Crossman <[email protected]>

commit ec37198acca7b4c17b96247697406e47aafe0605 upstream.

I've confirmed that the ASMedia ASM1142 has the same problem as the ASM2142/ASM3142, in that it too reports that it supports 64-bit DMA addresses when in fact it does not. As with the ASM2142/ASM3142, this can cause problems on systems where the upper bits matter, and adding the XHCI_NO_64BIT_SUPPORT quirk completely fixes the issue.

---
 drivers/usb/host/xhci-pci.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/usb/host/xhci-pci.c +3 -1
@@ -61,6 +61,7 @@
 #define PCI_DEVICE_ID_AMD_PROMONTORYA_1			0x43bc
 #define PCI_DEVICE_ID_ASMEDIA_1042_XHCI			0x1042
 #define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI		0x1142
+#define PCI_DEVICE_ID_ASMEDIA_1142_XHCI			0x1242
 #define PCI_DEVICE_ID_ASMEDIA_2142_XHCI			0x2142
 
 static const char hcd_name[] = "xhci_hcd";
@@ -238,7 +239,8 @@ static void xhci_pci_quirks(struct devic
 		pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI)
 		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
-		pdev->device == PCI_DEVICE_ID_ASMEDIA_2142_XHCI)
+	    (pdev->device == PCI_DEVICE_ID_ASMEDIA_1142_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_ASMEDIA_2142_XHCI))
 		xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
 
 	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
author maintainer
#45 lore raw

PATCH 45/228 cgroup: add missing skcd->no_refcnt check in cgroup_sk_clone()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

Add skcd->no_refcnt check which is missed when backporting ad0f75e5f57c ("cgroup: fix cgroup_sk_alloc() for sk_clone_lock()").

This patch is needed in stable-4.9, stable-4.14 and stable-4.19.

---
 kernel/cgroup/cgroup.c | 2 ++
 1 file changed, 2 insertions(+)
kernel/cgroup/cgroup.c +2 -0
index a2fed8fbd2bde..ada060e628ce3 100644
@@ -5827,6 +5827,8 @@ void cgroup_sk_clone(struct sock_cgroup_data *skcd)
 {
 	/* Socket clone path */
 	if (skcd->val) {
+		if (skcd->no_refcnt)
+			return;
 		/*
 		 * We might be cloning a socket which is left in an empty
 		 * cgroup and the cgroup might have already been rmdir'd.
Signature · 1 line
2.25.1
author maintainer
#47 lore raw

PATCH 47/228 sched: correct SD_flags returned by tl->sd_flags()

In reply to Greg Kroah-Hartman

From: Peng Liu <[email protected]>

[ Upstream commit 9b1b234bb86bcdcdb142e900d39b599185465dbb ]

During sched domain init, we check whether non-topological SD_flags are returned by tl->sd_flags(), if found, fire a waning and correct the violation, but the code failed to correct the violation. Correct this.

---
 kernel/sched/topology.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/sched/topology.c +1 -1
index 867d173dab482..152ffe0c24330 100644
@@ -1117,7 +1117,7 @@ sd_init(struct sched_domain_topology_level *tl,
 		sd_flags = (*tl->sd_flags)();
 	if (WARN_ONCE(sd_flags & ~TOPOLOGY_SD_FLAGS,
 			"wrong sd_flags in topology description\n"))
-		sd_flags &= ~TOPOLOGY_SD_FLAGS;
+		sd_flags &= TOPOLOGY_SD_FLAGS;
 
 	*sd = (struct sched_domain){
 		.min_interval		= sd_weight,
Signature · 1 line
2.25.1
author maintainer
#50 lore raw

PATCH 50/228 EDAC: Fix reference count leaks

In reply to Greg Kroah-Hartman

From: Qiushi Wu <[email protected]>

[ Upstream commit 17ed808ad243192fb923e4e653c1338d3ba06207 ]

When kobject_init_and_add() returns an error, it should be handled because kobject_init_and_add() takes a reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object.

Therefore, replace calling kfree() and call kobject_put() and add a missing kobject_put() in the edac_device_register_sysfs_main_kobj() error path.

[ bp: Massage and merge into a single patch. ]

---
 drivers/edac/edac_device_sysfs.c | 1 +
 drivers/edac/edac_pci_sysfs.c    | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)
drivers/edac/edac_device_sysfs.c +1 -0
index 0e7ea3591b781..5e75937537997 100644
@@ -275,6 +275,7 @@ int edac_device_register_sysfs_main_kobj(struct edac_device_ctl_info *edac_dev)
 
 	/* Error exit stack */
 err_kobj_reg:
+	kobject_put(&edac_dev->kobj);
 	module_put(edac_dev->owner);
 
 err_out:
drivers/edac/edac_pci_sysfs.c +1 -1
index 72c9eb9fdffbe..53042af7262e2 100644
@@ -386,7 +386,7 @@ static int edac_pci_main_kobj_setup(void)
 
 	/* Error unwind statck */
 kobject_init_and_add_fail:
-	kfree(edac_pci_top_main_kobj);
+	kobject_put(edac_pci_top_main_kobj);
 
 kzalloc_fail:
 	module_put(THIS_MODULE);
Signature · 1 line
2.25.1
author maintainer
#51 lore raw

PATCH 51/228 arm64: dts: qcom: msm8916: Replace invalid bias-pull-none property

In reply to Greg Kroah-Hartman

From: Stephan Gerhold <[email protected]>

[ Upstream commit 1b6a1a162defe649c5599d661b58ac64bb6f31b6 ]

msm8916-pins.dtsi specifies "bias-pull-none" for most of the audio pin configurations. This was likely copied from the qcom kernel fork where the same property was used for these audio pins.

However, "bias-pull-none" actually does not exist at all - not in mainline and not in downstream. I can only guess that the original intention was to configure "no pull", i.e. bias-disable.

Change it to that instead.

Fixes 143bb9ad85b7 ("arm64: dts: qcom: add audio pinctrls")
Cc Srinivas Kandagatla <[email protected]>
---
 arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
arch/arm64/boot/dts/qcom/msm8916-pins.dtsi +5 -5
index 4cb0b58341432..69ba1d79bcd5d 100644
@@ -542,7 +542,7 @@ pinconf {
 				pins = "gpio63", "gpio64", "gpio65", "gpio66",
 				       "gpio67", "gpio68";
 				drive-strength = <8>;
-				bias-pull-none;
+				bias-disable;
 			};
 		};
 		cdc_pdm_lines_sus: pdm_lines_off {
@@ -571,7 +571,7 @@ pinconf {
 				pins = "gpio113", "gpio114", "gpio115",
 				       "gpio116";
 				drive-strength = <8>;
-				bias-pull-none;
+				bias-disable;
 			};
 		};
 
@@ -599,7 +599,7 @@ pinmux {
 			pinconf {
 				pins = "gpio110";
 				drive-strength = <8>;
-				bias-pull-none;
+				bias-disable;
 			};
 		};
 
@@ -625,7 +625,7 @@ pinmux {
 			pinconf {
 				pins = "gpio116";
 				drive-strength = <8>;
-				bias-pull-none;
+				bias-disable;
 			};
 		};
 		ext_mclk_tlmm_lines_sus: mclk_lines_off {
@@ -653,7 +653,7 @@ pinconf {
 				pins = "gpio112", "gpio117", "gpio118",
 					"gpio119";
 				drive-strength = <8>;
-				bias-pull-none;
+				bias-disable;
 			};
 		};
 		ext_sec_tlmm_lines_sus: tlmm_lines_off {
Signature · 1 line
2.25.1
author maintainer
#23 lore raw

PATCH 23/228 i2c: slave: add sanity check when unregistering

In reply to Greg Kroah-Hartman

From: Wolfram Sang <[email protected]>

[ Upstream commit 8808981baf96e1b3dea1f08461e4d958aa0dbde1 ]

---
 drivers/i2c/i2c-core-slave.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/i2c/i2c-core-slave.c +3 -0
index 21051aba39e3a..d89bc31e06227 100644
@@ -62,6 +62,9 @@ int i2c_slave_unregister(struct i2c_client *client)
 {
 	int ret;
 
+	if (IS_ERR_OR_NULL(client))
+		return -EINVAL;
+
 	if (!client->adapter->algo->unreg_slave) {
 		dev_err(&client->dev, "%s: not supported by adapter\n", __func__);
 		return -EOPNOTSUPP;
Signature · 1 line
2.25.1
author maintainer
#26 lore raw

PATCH 26/228 atm: fix atm_dev refcnt leaks in atmtcp_remove_persistent

In reply to Greg Kroah-Hartman

From: Xin Xiong <[email protected]>

[ Upstream commit 51875dad43b44241b46a569493f1e4bfa0386d86 ]

atmtcp_remove_persistent() invokes atm_dev_lookup(), which returns a reference of atm_dev with increased refcount or NULL if fails.

The refcount leaks issues occur in two error handling paths. If dev_data->persist is zero or PRIV(dev)->vcc isn't NULL, the function returns 0 without decreasing the refcount kept by a local variable, resulting in refcount leaks.

Fix the issue by adding atm_dev_put() before returning 0 both when dev_data->persist is zero or PRIV(dev)->vcc isn't NULL.

---
 drivers/atm/atmtcp.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/atm/atmtcp.c +8 -2
index afebeb1c3e1e9..723bad1201cc5 100644
@@ -432,9 +432,15 @@ static int atmtcp_remove_persistent(int itf)
 		return -EMEDIUMTYPE;
 	}
 	dev_data = PRIV(dev);
-	if (!dev_data->persist) return 0;
+	if (!dev_data->persist) {
+		atm_dev_put(dev);
+		return 0;
+	}
 	dev_data->persist = 0;
-	if (PRIV(dev)->vcc) return 0;
+	if (PRIV(dev)->vcc) {
+		atm_dev_put(dev);
+		return 0;
+	}
 	kfree(dev_data);
 	atm_dev_put(dev);
 	atm_dev_deregister(dev);
Signature · 1 line
2.25.1
author maintainer
#24 lore raw

PATCH 24/228 cfg80211: check vendor command doit pointer before use

In reply to Greg Kroah-Hartman

From: Julian Squires <[email protected]>

[ Upstream commit 4052d3d2e8f47a15053320bbcbe365d15610437d ]

In the case where a vendor command does not implement doit, and has no flags set, doit would not be validated and a NULL pointer dereference would occur, for example when invoking the vendor command via iw.

I encountered this while developing new vendor commands. Perhaps in practice it is advisable to always implement doit along with dumpit, but it seems reasonable to me to always check doit anyway, not just when NEED_WDEV.

---
 net/wireless/nl80211.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
net/wireless/nl80211.c +3 -3
index d0b75781e6f7a..9be7ee322093b 100644
@@ -11859,13 +11859,13 @@ static int nl80211_vendor_cmd(struct sk_buff *skb, struct genl_info *info)
 				if (!wdev_running(wdev))
 					return -ENETDOWN;
 			}
-
-			if (!vcmd->doit)
-				return -EOPNOTSUPP;
 		} else {
 			wdev = NULL;
 		}
 
+		if (!vcmd->doit)
+			return -EOPNOTSUPP;
+
 		if (info->attrs[NL80211_ATTR_VENDOR_DATA]) {
 			data = nla_data(info->attrs[NL80211_ATTR_VENDOR_DATA]);
 			len = nla_len(info->attrs[NL80211_ATTR_VENDOR_DATA]);
Signature · 1 line
2.25.1
author maintainer
#28 lore raw

PATCH 28/228 Drivers: hv: vmbus: Ignore CHANNELMSG_TL_CONNECT_RESULT(23)

In reply to Greg Kroah-Hartman

From: Dexuan Cui <[email protected]>

[ Upstream commit ddc9d357b991838c2d975e8d7e4e9db26f37a7ff ]

When a Linux hv_sock app tries to connect to a Service GUID on which no host app is listening, a recent host (RS3+) sends a CHANNELMSG_TL_CONNECT_RESULT (23) message to Linux and this triggers such a warning:

unknown msgtype=23

WARNING: CPU: 2 PID: 0 at drivers/hv/vmbus_drv.c:1031 vmbus_on_msg_dpc

Actually Linux can safely ignore the message because the Linux app's connect() will time out in 2 seconds: see VSOCK_DEFAULT_CONNECT_TIMEOUT and vsock_stream_connect(). We don't bother to make use of the message
because: 1) it's only supported on recent hosts; 2) a non-trivial effort is required to use the message in Linux, but the benefit is small.

So, let's not see the warning by silently ignoring the message.

---
 drivers/hv/channel_mgmt.c | 21 +++++++--------------
 drivers/hv/vmbus_drv.c    |  4 ++++
 include/linux/hyperv.h    |  2 ++
 3 files changed, 13 insertions(+), 14 deletions(-)
drivers/hv/channel_mgmt.c +7 -14
index 43eaf54736f4e..462f7f363faab 100644
@@ -1228,6 +1228,8 @@ channel_message_table[CHANNELMSG_COUNT] = {
 	{ CHANNELMSG_19,			0, NULL },
 	{ CHANNELMSG_20,			0, NULL },
 	{ CHANNELMSG_TL_CONNECT_REQUEST,	0, NULL },
+	{ CHANNELMSG_22,			0, NULL },
+	{ CHANNELMSG_TL_CONNECT_RESULT,		0, NULL },
 };
 
 /*
@@ -1239,23 +1241,14 @@ void vmbus_onmessage(void *context)
 {
 	struct hv_message *msg = context;
 	struct vmbus_channel_message_header *hdr;
-	int size;
 
 	hdr = (struct vmbus_channel_message_header *)msg->u.payload;
-	size = msg->header.payload_size;
 
-	if (hdr->msgtype >= CHANNELMSG_COUNT) {
-		pr_err("Received invalid channel message type %d size %d\n",
-			   hdr->msgtype, size);
-		print_hex_dump_bytes("", DUMP_PREFIX_NONE,
-				     (unsigned char *)msg->u.payload, size);
-		return;
-	}
-
-	if (channel_message_table[hdr->msgtype].message_handler)
-		channel_message_table[hdr->msgtype].message_handler(hdr);
-	else
-		pr_err("Unhandled channel message type %d\n", hdr->msgtype);
+	/*
+	 * vmbus_on_msg_dpc() makes sure the hdr->msgtype here can not go
+	 * out of bound and the message_handler pointer can not be NULL.
+	 */
+	channel_message_table[hdr->msgtype].message_handler(hdr);
 }
 
 /*
drivers/hv/vmbus_drv.c +4 -0
index 1fd812ed679b4..45b8ccdfb0852 100644
@@ -890,6 +890,10 @@ void vmbus_on_msg_dpc(unsigned long data)
 	}
 
 	entry = &channel_message_table[hdr->msgtype];
+
+	if (!entry->message_handler)
+		goto msg_handled;
+
 	if (entry->handler_type	== VMHT_BLOCKING) {
 		ctx = kmalloc(sizeof(*ctx), GFP_ATOMIC);
 		if (ctx == NULL)
include/linux/hyperv.h +2 -0
index 8d3ca6da33421..63cd81e5610d1 100644
@@ -422,6 +422,8 @@ enum vmbus_channel_message_type {
 	CHANNELMSG_19				= 19,
 	CHANNELMSG_20				= 20,
 	CHANNELMSG_TL_CONNECT_REQUEST		= 21,
+	CHANNELMSG_22				= 22,
+	CHANNELMSG_TL_CONNECT_RESULT		= 23,
 	CHANNELMSG_COUNT
 };
 
Signature · 1 line
2.25.1
author maintainer
#27 lore raw

PATCH 27/228 tools lib traceevent: Fix memory leak in process_dynamic_array_len

In reply to Greg Kroah-Hartman

From: Philippe Duplessis-Guindon <[email protected]>

[ Upstream commit e24c6447ccb7b1a01f9bf0aec94939e6450c0b4d ]

I compiled with AddressSanitizer and I had these memory leaks while I was using the tep_parse_format function:

    Direct leak of 28 byte(s) in 4 object(s) allocated from:
        #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe)
        #1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985
        #2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140
        #3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206
        #4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291
        #5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299
        #6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849
        #7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161
        #8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207
        #9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786
        #10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285
        #11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369
        #12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335
        #13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389
        #14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431
        #15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251
        #16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284
        #17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593
        #18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727
        #19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048
        #20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127
        #21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152
        #22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252
        #23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347
        #24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461
        #25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673
        #26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2)

The token variable in the process_dynamic_array_len function is allocated in the read_expect_type function, but is not freed before calling the read_token function.

Free the token variable before calling read_token in order to plug the leak.

---
 tools/lib/traceevent/event-parse.c | 1 +
 1 file changed, 1 insertion(+)
tools/lib/traceevent/event-parse.c +1 -0
index 8211e8010e09b..d260ca680f074 100644
@@ -2780,6 +2780,7 @@ process_dynamic_array_len(struct event_format *event, struct print_arg *arg,
 	if (read_expected(EVENT_DELIM, ")") < 0)
 		goto out_err;
 
+	free_token(token);
 	type = read_token(&token);
 	*tok = token;
 
Signature · 1 line
2.25.1
author maintainer
#53 lore raw

PATCH 53/228 m68k: mac: Dont send IOP message until channel is idle

In reply to Greg Kroah-Hartman

From: Finn Thain <[email protected]>

[ Upstream commit aeb445bf2194d83e12e85bf5c65baaf1f093bd8f ]

In the following sequence of calls, iop_do_send() gets called when the "send" channel is not in the IOP_MSG_IDLE state:

	iop_ism_irq()
		iop_handle_send()
			(msg->handler)()
				iop_send_message()
			iop_do_send()

Avoid this by testing the channel state before calling iop_do_send().

When sending, and iop_send_queue is empty, call iop_do_send() because the channel is idle. If iop_send_queue is not empty, iop_do_send() will get called later by iop_handle_send().

---
 arch/m68k/mac/iop.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)
arch/m68k/mac/iop.c +3 -6
index 4c1e606e7d03b..fb61af5ac4ab8 100644
@@ -416,7 +416,8 @@ static void iop_handle_send(uint iop_num, uint chan)
 	msg->status = IOP_MSGSTATUS_UNUSED;
 	msg = msg->next;
 	iop_send_queue[iop_num][chan] = msg;
-	if (msg) iop_do_send(msg);
+	if (msg && iop_readb(iop, IOP_ADDR_SEND_STATE + chan) == IOP_MSG_IDLE)
+		iop_do_send(msg);
 }
 
 /*
@@ -490,16 +491,12 @@ int iop_send_message(uint iop_num, uint chan, void *privdata,
 
 	if (!(q = iop_send_queue[iop_num][chan])) {
 		iop_send_queue[iop_num][chan] = msg;
+		iop_do_send(msg);
 	} else {
 		while (q->next) q = q->next;
 		q->next = msg;
 	}
 
-	if (iop_readb(iop_base[iop_num],
-	    IOP_ADDR_SEND_STATE + chan) == IOP_MSG_IDLE) {
-		iop_do_send(msg);
-	}
-
 	return 0;
 }
 
Signature · 1 line
2.25.1
author maintainer
#62 lore raw

PATCH 62/228 fs/btrfs: Add cond_resched() for try_release_extent_mapping() stalls

In reply to Greg Kroah-Hartman

From: Paul E. McKenney <[email protected]>

[ Upstream commit 9f47eb5461aaeb6cb8696f9d11503ae90e4d5cb0 ]

Very large I/Os can cause the following RCU CPU stall warning:

RIP: 0010:rb_prev+0x8/0x50
Code: 49 89 c0 49 89 d1 48 89 c2 48 89 f8 e9 e5 fd ff ff 4c 89 48 10 c3 4c =

89 06 c3 4c 89 40 10 c3 0f 1f 00 48 8b 0f 48 39 cf 74 38 <48> 8b 47 10 48 85 c0 74 22 48 8b 50 08 48 85 d2 74 0c 48 89 d0 48
RSP: 0018:ffffc9002212bab0 EFLAGS: 00000287 ORIG_RAX: ffffffffffffff13
RAX: ffff888821f93630 RBX: ffff888821f93630 RCX: ffff888821f937e0
RDX: 0000000000000000 RSI: 0000000000102000 RDI: ffff888821f93630
RBP: 0000000000103000 R08: 000000000006c000 R09: 0000000000000238
R10: 0000000000102fff R11: ffffc9002212bac8 R12: 0000000000000001
R13: ffffffffffffffff R14: 0000000000102000 R15: ffff888821f937e0

 __lookup_extent_mapping+0xa0/0x110
 try_release_extent_mapping+0xdc/0x220
 btrfs_releasepage+0x45/0x70
 shrink_page_list+0xa39/0xb30
 shrink_inactive_list+0x18f/0x3b0
 shrink_lruvec+0x38e/0x6b0
 shrink_node+0x14d/0x690
 do_try_to_free_pages+0xc6/0x3e0
 try_to_free_mem_cgroup_pages+0xe6/0x1e0
 reclaim_high.constprop.73+0x87/0xc0
 mem_cgroup_handle_over_high+0x66/0x150
 exit_to_usermode_loop+0x82/0xd0
 do_syscall_64+0xd4/0x100
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

On a PREEMPT=n kernel, the try_release_extent_mapping() function's "while" loop might run for a very long time on a large I/O. This commit therefore adds a cond_resched() to this loop, providing RCU any needed quiescent states.

---
 fs/btrfs/extent_io.c | 2 ++
 1 file changed, 2 insertions(+)
fs/btrfs/extent_io.c +2 -0
index 6d2bfbb63d9ba..ef1fd6a09d8e5 100644
@@ -4323,6 +4323,8 @@ int try_release_extent_mapping(struct extent_map_tree *map,
 
 			/* once for us */
 			free_extent_map(em);
+
+			cond_resched(); /* Allow large-extent preemption. */
 		}
 	}
 	return try_release_extent_state(map, tree, page, mask);
Signature · 1 line
2.25.1
author maintainer
#67 lore raw

PATCH 67/228 drm/nouveau: fix multiple instances of reference count leaks

In reply to Greg Kroah-Hartman

From: Aditya Pakki <[email protected]>

[ Upstream commit 659fb5f154c3434c90a34586f3b7aa1c39cf6062 ]

On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the
ref count before returning the error.

---
 drivers/gpu/drm/nouveau/nouveau_drm.c | 8 ++++++--
 drivers/gpu/drm/nouveau/nouveau_gem.c | 4 +++-
 2 files changed, 9 insertions(+), 3 deletions(-)
drivers/gpu/drm/nouveau/nouveau_drm.c +6 -2
index d00524a5d7f08..fb6b1d0f7fef3 100644
@@ -840,8 +840,10 @@ nouveau_drm_open(struct drm_device *dev, struct drm_file *fpriv)
 
 	/* need to bring up power immediately if opening device */
 	ret = pm_runtime_get_sync(dev->dev);
-	if (ret < 0 && ret != -EACCES)
+	if (ret < 0 && ret != -EACCES) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return ret;
+	}
 
 	get_task_comm(tmpname, current);
 	snprintf(name, sizeof(name), "%s[%d]", tmpname, pid_nr(fpriv->pid));
@@ -930,8 +932,10 @@ nouveau_drm_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	long ret;
 
 	ret = pm_runtime_get_sync(dev->dev);
-	if (ret < 0 && ret != -EACCES)
+	if (ret < 0 && ret != -EACCES) {
+		pm_runtime_put_autosuspend(dev->dev);
 		return ret;
+	}
 
 	switch (_IOC_NR(cmd) - DRM_COMMAND_BASE) {
 	case DRM_NOUVEAU_NVIF:
drivers/gpu/drm/nouveau/nouveau_gem.c +3 -1
index 60ffb70bb9089..c6149b5be073e 100644
@@ -42,8 +42,10 @@ nouveau_gem_object_del(struct drm_gem_object *gem)
 	int ret;
 
 	ret = pm_runtime_get_sync(dev);
-	if (WARN_ON(ret < 0 && ret != -EACCES))
+	if (WARN_ON(ret < 0 && ret != -EACCES)) {
+		pm_runtime_put_autosuspend(dev);
 		return;
+	}
 
 	if (gem->import_attach)
 		drm_prime_gem_destroy(gem, nvbo->bo.sg);
Signature · 1 line
2.25.1
author maintainer
#70 lore raw

PATCH 70/228 mm/mmap.c: Add cond_resched() for exit_mmap() CPU stalls

In reply to Greg Kroah-Hartman

From: Paul E. McKenney <[email protected]>

[ Upstream commit 0a3b3c253a1eb2c7fe7f34086d46660c909abeb3 ]

A large process running on a heavily loaded system can encounter the following RCU CPU stall warning:

  rcu: INFO: rcu_sched self-detected stall on CPU
  rcu: 	3-....: (20998 ticks this GP) idle=4ea/1/0x4000000000000002 softirq=556558/556558 fqs=5190
  	(t=21013 jiffies g=1005461 q=132576)
  NMI backtrace for cpu 3
  CPU: 3 PID: 501900 Comm: aio-free-ring-w Kdump: loaded Not tainted 5.2.9-108_fbk12_rc3_3858_gb83b75af7909 #1
  Hardware name: Wiwynn   HoneyBadger/PantherPlus, BIOS HBM6.71 02/03/2016
  Call Trace:
   <IRQ>
   dump_stack+0x46/0x60
   nmi_cpu_backtrace.cold.3+0x13/0x50
   ? lapic_can_unplug_cpu.cold.27+0x34/0x34
   nmi_trigger_cpumask_backtrace+0xba/0xca
   rcu_dump_cpu_stacks+0x99/0xc7
   rcu_sched_clock_irq.cold.87+0x1aa/0x397
   ? tick_sched_do_timer+0x60/0x60
   update_process_times+0x28/0x60
   tick_sched_timer+0x37/0x70
   __hrtimer_run_queues+0xfe/0x270
   hrtimer_interrupt+0xf4/0x210
   smp_apic_timer_interrupt+0x5e/0x120
   apic_timer_interrupt+0xf/0x20
   </IRQ>
  RIP: 0010:kmem_cache_free+0x223/0x300
  Code: 88 00 00 00 0f 85 ca 00 00 00 41 8b 55 18 31 f6 f7 da 41 f6 45 0a 02 40 0f 94 c6 83 c6 05 9c 41 5e fa e8 a0 a7 01 00 41 56 9d <49> 8b 47 08 a8 03 0f 85 87 00 00 00 65 48 ff 08 e9 3d fe ff ff 65
  RSP: 0018:ffffc9000e8e3da8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
  RAX: 0000000000020000 RBX: ffff88861b9de960 RCX: 0000000000000030
  RDX: fffffffffffe41e8 RSI: 000060777fe3a100 RDI: 000000000001be18
  RBP: ffffea00186e7780 R08: ffffffffffffffff R09: ffffffffffffffff
  R10: ffff88861b9dea28 R11: ffff88887ffde000 R12: ffffffff81230a1f
  R13: ffff888854684dc0 R14: 0000000000000206 R15: ffff8888547dbc00
   ? remove_vma+0x4f/0x60
   remove_vma+0x4f/0x60
   exit_mmap+0xd6/0x160
   mmput+0x4a/0x110
   do_exit+0x278/0xae0
   ? syscall_trace_enter+0x1d3/0x2b0
   ? handle_mm_fault+0xaa/0x1c0
   do_group_exit+0x3a/0xa0
   __x64_sys_exit_group+0x14/0x20
   do_syscall_64+0x42/0x100
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

And on a PREEMPT=n kernel, the "while (vma)" loop in exit_mmap() can run for a very long time given a large process. This commit therefore adds a cond_resched() to this loop, providing RCU any needed quiescent states.

---
 mm/mmap.c | 1 +
 1 file changed, 1 insertion(+)
mm/mmap.c +1 -0
index 8c6ed06983f9e..724b7c4f1a5b5 100644
@@ -3065,6 +3065,7 @@ void exit_mmap(struct mm_struct *mm)
 		if (vma->vm_flags & VM_ACCOUNT)
 			nr_accounted += vma_pages(vma);
 		vma = remove_vma(vma);
+		cond_resched();
 	}
 	vm_unacct_memory(nr_accounted);
 }
Signature · 1 line
2.25.1
author maintainer
#68 lore raw

PATCH 68/228 drm/debugfs: fix plain echo to connector "force" attribute

In reply to Greg Kroah-Hartman

From: Michael Tretter <[email protected]>

[ Upstream commit c704b17071c4dc571dca3af4e4151dac51de081a ]

Using plain echo to set the "force" connector attribute fails with -EINVAL, because echo appends a newline to the output.

Replace strcmp with sysfs_streq to also accept strings that end with a newline.

v2: use sysfs_streq instead of stripping trailing whitespace

---
 drivers/gpu/drm/drm_debugfs.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/gpu/drm/drm_debugfs.c +4 -4
index c1807d5754b2a..454deba13ee5b 100644
@@ -250,13 +250,13 @@ static ssize_t connector_write(struct file *file, const char __user *ubuf,
 
 	buf[len] = '\0';
 
-	if (!strcmp(buf, "on"))
+	if (sysfs_streq(buf, "on"))
 		connector->force = DRM_FORCE_ON;
-	else if (!strcmp(buf, "digital"))
+	else if (sysfs_streq(buf, "digital"))
 		connector->force = DRM_FORCE_ON_DIGITAL;
-	else if (!strcmp(buf, "off"))
+	else if (sysfs_streq(buf, "off"))
 		connector->force = DRM_FORCE_OFF;
-	else if (!strcmp(buf, "unspecified"))
+	else if (sysfs_streq(buf, "unspecified"))
 		connector->force = DRM_FORCE_UNSPECIFIED;
 	else
 		return -EINVAL;
Signature · 1 line
2.25.1
author maintainer
#69 lore raw

PATCH 69/228 irqchip/irq-mtk-sysirq: Replace spinlock with raw_spinlock

In reply to Greg Kroah-Hartman

From: Bartosz Golaszewski <[email protected]>

[ Upstream commit 6eeb997ab5075e770a002c51351fa4ec2c6b5c39 ]

This driver may take a regular spinlock when a raw spinlock (irq_desc->lock) is already taken which results in the following lockdep splat:

=============================
[ BUG: Invalid wait context ]
5.7.0-rc7 #1 Not tainted
-----------------------------
swapper/0/0 is trying to lock:
ffffff800303b798 (&chip_data->lock){....}-{3:3}, at: mtk_sysirq_set_type+0x48/0xc0 other info that might help us debug this:
context-{5:5}
2 locks held by swapper/0/0:
#0: ffffff800302ee68 (&desc->request_mutex){....}-{4:4}, at: __setup_irq+0xc4/0x8a0 #1: ffffff800302ecf0 (&irq_desc_lock_class){....}-{2:2}, at: __setup_irq+0xe4/0x8a0

stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc7 #1
Hardware name: Pumpkin MT8516 (DT)
Call trace:
 dump_backtrace+0x0/0x180
 show_stack+0x14/0x20
 dump_stack+0xd0/0x118
 __lock_acquire+0x8c8/0x2270
 lock_acquire+0xf8/0x470
 _raw_spin_lock_irqsave+0x50/0x78
 mtk_sysirq_set_type+0x48/0xc0
 __irq_set_trigger+0x58/0x170
 __setup_irq+0x420/0x8a0
 request_threaded_irq+0xd8/0x190
 timer_of_init+0x1e8/0x2c4
 mtk_gpt_init+0x5c/0x1dc
 timer_probe+0x74/0xf4
 time_init+0x14/0x44
 start_kernel+0x394/0x4f0

Replace the spinlock_t with raw_spinlock_t to avoid this warning.

---
 drivers/irqchip/irq-mtk-sysirq.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/irqchip/irq-mtk-sysirq.c +4 -4
index 90aaf190157f7..42455f31b0611 100644
@@ -23,7 +23,7 @@
 #include <linux/spinlock.h>
 
 struct mtk_sysirq_chip_data {
-	spinlock_t lock;
+	raw_spinlock_t lock;
 	u32 nr_intpol_bases;
 	void __iomem **intpol_bases;
 	u32 *intpol_words;
@@ -45,7 +45,7 @@ static int mtk_sysirq_set_type(struct irq_data *data, unsigned int type)
 	reg_index = chip_data->which_word[hwirq];
 	offset = hwirq & 0x1f;
 
-	spin_lock_irqsave(&chip_data->lock, flags);
+	raw_spin_lock_irqsave(&chip_data->lock, flags);
 	value = readl_relaxed(base + reg_index * 4);
 	if (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_EDGE_FALLING) {
 		if (type == IRQ_TYPE_LEVEL_LOW)
@@ -61,7 +61,7 @@ static int mtk_sysirq_set_type(struct irq_data *data, unsigned int type)
 
 	data = data->parent_data;
 	ret = data->chip->irq_set_type(data, type);
-	spin_unlock_irqrestore(&chip_data->lock, flags);
+	raw_spin_unlock_irqrestore(&chip_data->lock, flags);
 	return ret;
 }
 
@@ -220,7 +220,7 @@ static int __init mtk_sysirq_of_init(struct device_node *node,
 		ret = -ENOMEM;
 		goto out_free_which_word;
 	}
-	spin_lock_init(&chip_data->lock);
+	raw_spin_lock_init(&chip_data->lock);
 
 	return 0;
 
Signature · 1 line
2.25.1
author maintainer
#71 lore raw

PATCH 71/228 brcmfmac: To fix Bss Info flag definition Bug

In reply to Greg Kroah-Hartman

From: Prasanna Kerekoppa <[email protected]>

[ Upstream commit fa3266541b13f390eb35bdbc38ff4a03368be004 ]

Bss info flag definition need to be fixed from 0x2 to 0x4 This flag is for rssi info received on channel.
All Firmware branches defined as 0x4 and this is bug in brcmfmac.

---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h +1 -1
index e0d22fedb2b45..05bd636011ec9 100644
@@ -30,7 +30,7 @@
 #define BRCMF_ARP_OL_PEER_AUTO_REPLY	0x00000008
 
 #define	BRCMF_BSS_INFO_VERSION	109 /* curr ver of brcmf_bss_info_le struct */
-#define BRCMF_BSS_RSSI_ON_CHANNEL	0x0002
+#define BRCMF_BSS_RSSI_ON_CHANNEL	0x0004
 
 #define BRCMF_STA_WME              0x00000002      /* WMM association */
 #define BRCMF_STA_AUTHE            0x00000008      /* Authenticated */
Signature · 1 line
2.25.1
author maintainer
#54 lore raw

PATCH 54/228 m68k: mac: Fix IOP status/control register writes

In reply to Greg Kroah-Hartman

From: Finn Thain <[email protected]>

[ Upstream commit 931fc82a6aaf4e2e4a5490addaa6a090d78c24a7 ]

When writing values to the IOP status/control register make sure those values do not have any extraneous bits that will clear interrupt flags.

To place the SCC IOP into bypass mode would be desirable but this is not achieved by writing IOP_DMAINACTIVE | IOP_RUN | IOP_AUTOINC | IOP_BYPASS to the control register. Drop this ineffective register write.

Remove the flawed and unused iop_bypass() function. Make use of the unused iop_stop() function.

---
 arch/m68k/mac/iop.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)
arch/m68k/mac/iop.c +3 -9
index fb61af5ac4ab8..0b94f6672c5f3 100644
@@ -183,7 +183,7 @@ static __inline__ void iop_writeb(volatile struct mac_iop *iop, __u16 addr, __u8
 
 static __inline__ void iop_stop(volatile struct mac_iop *iop)
 {
-	iop->status_ctrl &= ~IOP_RUN;
+	iop->status_ctrl = IOP_AUTOINC;
 }
 
 static __inline__ void iop_start(volatile struct mac_iop *iop)
@@ -191,14 +191,9 @@ static __inline__ void iop_start(volatile struct mac_iop *iop)
 	iop->status_ctrl = IOP_RUN | IOP_AUTOINC;
 }
 
-static __inline__ void iop_bypass(volatile struct mac_iop *iop)
-{
-	iop->status_ctrl |= IOP_BYPASS;
-}
-
 static __inline__ void iop_interrupt(volatile struct mac_iop *iop)
 {
-	iop->status_ctrl |= IOP_IRQ;
+	iop->status_ctrl = IOP_IRQ | IOP_RUN | IOP_AUTOINC;
 }
 
 static int iop_alive(volatile struct mac_iop *iop)
@@ -244,7 +239,6 @@ void __init iop_preinit(void)
 		} else {
 			iop_base[IOP_NUM_SCC] = (struct mac_iop *) SCC_IOP_BASE_QUADRA;
 		}
-		iop_base[IOP_NUM_SCC]->status_ctrl = 0x87;
 		iop_scc_present = 1;
 	} else {
 		iop_base[IOP_NUM_SCC] = NULL;
@@ -256,7 +250,7 @@ void __init iop_preinit(void)
 		} else {
 			iop_base[IOP_NUM_ISM] = (struct mac_iop *) ISM_IOP_BASE_QUADRA;
 		}
-		iop_base[IOP_NUM_ISM]->status_ctrl = 0;
+		iop_stop(iop_base[IOP_NUM_ISM]);
 		iop_ism_present = 1;
 	} else {
 		iop_base[IOP_NUM_ISM] = NULL;
Signature · 1 line
2.25.1
author maintainer
#73 lore raw

PATCH 73/228 iwlegacy: Check the return value of pcie_capability_read_*()

In reply to Greg Kroah-Hartman

From: Bolarinwa Olayemi Saheed <[email protected]>

[ Upstream commit 9018fd7f2a73e9b290f48a56b421558fa31e8b75 ]

On failure pcie_capability_read_dword() sets it's last parameter, val to 0. However, with Patch 14/14, it is possible that val is set to ~0 on failure. This would introduce a bug because (x & x) == (~0 & x).

This bug can be avoided without changing the function's behaviour if the return value of pcie_capability_read_dword is checked to confirm success.

Check the return value of pcie_capability_read_dword() to ensure success.

---
 drivers/net/wireless/intel/iwlegacy/common.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/wireless/intel/iwlegacy/common.c +2 -2
index 6e6b124f0d5e3..3ca84577803cc 100644
@@ -4302,8 +4302,8 @@ il_apm_init(struct il_priv *il)
 	 *    power savings, even without L1.
 	 */
 	if (il->cfg->set_l0s) {
-		pcie_capability_read_word(il->pci_dev, PCI_EXP_LNKCTL, &lctl);
-		if (lctl & PCI_EXP_LNKCTL_ASPM_L1) {
+		ret = pcie_capability_read_word(il->pci_dev, PCI_EXP_LNKCTL, &lctl);
+		if (!ret && (lctl & PCI_EXP_LNKCTL_ASPM_L1)) {
 			/* L1-ASPM enabled; disable(!) L0S  */
 			il_set_bit(il, CSR_GIO_REG,
 				   CSR_GIO_REG_VAL_L0S_ENABLED);
Signature · 1 line
2.25.1
author maintainer
#75 lore raw

PATCH 75/228 usb: gadget: net2280: fix memory leak on probe error handling paths

In reply to Greg Kroah-Hartman

From: Evgeny Novikov <[email protected]>

[ Upstream commit 2468c877da428ebfd701142c4cdfefcfb7d4c00e ]

Driver does not release memory for device on error handling paths in net2280_probe() when gadget_release() is not registered yet.

The patch fixes the bug like in other similar drivers.

Found by Linux Driver Verification project (linuxtesting.org).

---
 drivers/usb/gadget/udc/net2280.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/usb/gadget/udc/net2280.c +3 -1
index 170327f84ea19..f1ac9a49e2bf1 100644
@@ -3786,8 +3786,10 @@ static int net2280_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	return 0;
 
 done:
-	if (dev)
+	if (dev) {
 		net2280_remove(pdev);
+		kfree(dev);
+	}
 	return retval;
 }
 
Signature · 1 line
2.25.1
author maintainer
#74 lore raw

PATCH 74/228 gpu: host1x: debug: Fix multiple channels emitting messages simultaneously

In reply to Greg Kroah-Hartman

From: Dmitry Osipenko <[email protected]>

[ Upstream commit 35681862808472a0a4b9a8817ae2789c0b5b3edc ]

Once channel's job is hung, it dumps the channel's state into KMSG before tearing down the offending job. If multiple channels hang at once, then they dump messages simultaneously, making the debug info unreadable, and thus, useless. This patch adds mutex which allows only one channel to emit debug messages at a time.

---
 drivers/gpu/host1x/debug.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/gpu/host1x/debug.c +4 -0
index 2aae0e63214c2..0b8c23c399c2a 100644
@@ -25,6 +25,8 @@
 #include "debug.h"
 #include "channel.h"
 
+static DEFINE_MUTEX(debug_lock);
+
 unsigned int host1x_debug_trace_cmdbuf;
 
 static pid_t host1x_debug_force_timeout_pid;
@@ -49,12 +51,14 @@ static int show_channel(struct host1x_channel *ch, void *data, bool show_fifo)
 	struct output *o = data;
 
 	mutex_lock(&ch->cdma.lock);
+	mutex_lock(&debug_lock);
 
 	if (show_fifo)
 		host1x_hw_show_channel_fifo(m, ch, o);
 
 	host1x_hw_show_channel_cdma(m, ch, o);
 
+	mutex_unlock(&debug_lock);
 	mutex_unlock(&ch->cdma.lock);
 
 	return 0;
Signature · 1 line
2.25.1
author maintainer
#77 lore raw

PATCH 77/228 usb: bdc: Halt controller on suspend

In reply to Greg Kroah-Hartman

From: Danesh Petigara <[email protected]>

[ Upstream commit 5fc453d7de3d0c345812453823a3a56783c5f82c ]

GISB bus error kernel panics have been observed during S2 transition tests on the 7271t platform. The errors are a result of the BDC interrupt handler trying to access BDC register space after the system's suspend callbacks have completed.

Adding a suspend hook to the BDC driver that halts the controller before S2 entry thus preventing unwanted access to the BDC register space during this transition.

---
 drivers/usb/gadget/udc/bdc/bdc_core.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/usb/gadget/udc/bdc/bdc_core.c +7 -2
index 2660cc2e42a08..58ba04d858bab 100644
@@ -613,9 +613,14 @@ static int bdc_remove(struct platform_device *pdev)
 static int bdc_suspend(struct device *dev)
 {
 	struct bdc *bdc = dev_get_drvdata(dev);
+	int ret;
 
-	clk_disable_unprepare(bdc->clk);
-	return 0;
+	/* Halt the controller */
+	ret = bdc_stop(bdc);
+	if (!ret)
+		clk_disable_unprepare(bdc->clk);
+
+	return ret;
 }
 
 static int bdc_resume(struct device *dev)
Signature · 1 line
2.25.1
author maintainer
#78 lore raw

PATCH 78/228 dyndbg: fix a BUG_ON in ddebug_describe_flags

In reply to Greg Kroah-Hartman

From: Jim Cromie <[email protected]>

[ Upstream commit f678ce8cc3cb2ad29df75d8824c74f36398ba871 ]

ddebug_describe_flags() currently fills a caller provided string buffer, after testing its size (also passed) in a BUG_ON. Fix this by replacing them with a known-big-enough string buffer wrapped in a struct, and passing that instead.

Also simplify ddebug_describe_flags() flags parameter from a struct to a member in that struct, and hoist the member deref up to the caller. This makes the function reusable (soon) where flags are unpacked.

---
 lib/dynamic_debug.c | 23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)
lib/dynamic_debug.c +11 -12
index c7c96bc7654af..91c451e0f4741 100644
@@ -85,22 +85,22 @@ static struct { unsigned flag:8; char opt_char; } opt_array[] = {
 	{ _DPRINTK_FLAGS_NONE, '_' },
 };
 
+struct flagsbuf { char buf[ARRAY_SIZE(opt_array)+1]; };
+
 /* format a string into buf[] which describes the _ddebug's flags */
-static char *ddebug_describe_flags(struct _ddebug *dp, char *buf,
-				    size_t maxlen)
+static char *ddebug_describe_flags(unsigned int flags, struct flagsbuf *fb)
 {
-	char *p = buf;
+	char *p = fb->buf;
 	int i;
 
-	BUG_ON(maxlen < 6);
 	for (i = 0; i < ARRAY_SIZE(opt_array); ++i)
-		if (dp->flags & opt_array[i].flag)
+		if (flags & opt_array[i].flag)
 			*p++ = opt_array[i].opt_char;
-	if (p == buf)
+	if (p == fb->buf)
 		*p++ = '_';
 	*p = '\0';
 
-	return buf;
+	return fb->buf;
 }
 
 #define vpr_info(fmt, ...)					\
@@ -142,7 +142,7 @@ static int ddebug_change(const struct ddebug_query *query,
 	struct ddebug_table *dt;
 	unsigned int newflags;
 	unsigned int nfound = 0;
-	char flagbuf[10];
+	struct flagsbuf fbuf;
 
 	/* search for matching ddebugs */
 	mutex_lock(&ddebug_lock);
@@ -199,8 +199,7 @@ static int ddebug_change(const struct ddebug_query *query,
 			vpr_info("changed %s:%d [%s]%s =%s\n",
 				 trim_prefix(dp->filename), dp->lineno,
 				 dt->mod_name, dp->function,
-				 ddebug_describe_flags(dp, flagbuf,
-						       sizeof(flagbuf)));
+				 ddebug_describe_flags(dp->flags, &fbuf));
 		}
 	}
 	mutex_unlock(&ddebug_lock);
@@ -779,7 +778,7 @@ static int ddebug_proc_show(struct seq_file *m, void *p)
 {
 	struct ddebug_iter *iter = m->private;
 	struct _ddebug *dp = p;
-	char flagsbuf[10];
+	struct flagsbuf flags;
 
 	vpr_info("called m=%p p=%p\n", m, p);
 
@@ -792,7 +791,7 @@ static int ddebug_proc_show(struct seq_file *m, void *p)
 	seq_printf(m, "%s:%u [%s]%s =%s \"",
 		   trim_prefix(dp->filename), dp->lineno,
 		   iter->table->mod_name, dp->function,
-		   ddebug_describe_flags(dp, flagsbuf, sizeof(flagsbuf)));
+		   ddebug_describe_flags(dp->flags, &flags));
 	seq_escape(m, dp->format, "\t\r\n\"");
 	seq_puts(m, "\"\n");
 
Signature · 1 line
2.25.1
author maintainer
#79 lore raw

PATCH 79/228 bcache: fix super block seq numbers comparision in register_cache_set()

In reply to Greg Kroah-Hartman

From: Coly Li <[email protected]>

[ Upstream commit 117f636ea695270fe492d0c0c9dfadc7a662af47 ]

In register_cache_set(), c is pointer to struct cache_set, and ca is pointer to struct cache, if ca->sb.seq > c->sb.seq, it means this registering cache has up to date version and other members, the in- memory version and other members should be updated to the newer value.

But current implementation makes a cache set only has a single cache device, so the above assumption works well except for a special case. The execption is when a cache device new created and both ca->sb.seq and c->sb.seq are 0, because the super block is never flushed out yet. In the location for the following if() check,
2156 if (ca->sb.seq > c->sb.seq) {

2157                 c->sb.version           = ca->sb.version;
2158                 memcpy(c->sb.set_uuid, ca->sb.set_uuid, 16);
2159                 c->sb.flags             = ca->sb.flags;
2160                 c->sb.seq               = ca->sb.seq;
2161                 pr_debug("set version = %llu\n", c->sb.version);

2162 }
c->sb.version is not initialized yet and valued 0. When ca->sb.seq is 0, the if() check will fail (because both values are 0), and the cache set version, set_uuid, flags and seq won't be updated.

The above problem is hiden for current code, because the bucket size is compatible among different super block version. And the next time when running cache set again, ca->sb.seq will be larger than 0 and cache set super block version will be updated properly.

But if the large bucket feature is enabled, sb->bucket_size is the low 16bits of the bucket size. For a power of 2 value, when the actual bucket size exceeds 16bit width, sb->bucket_size will always be 0. Then read_super_common() will fail because the if() check to is_power_of_2(sb->bucket_size) is false. This is how the long time hidden bug is triggered.

This patch modifies the if() check to the following way,
2156 if (ca->sb.seq > c->sb.seq || c->sb.seq == 0) {
Then cache set's version, set_uuid, flags and seq will always be updated corectly including for a new created cache device.

---
 drivers/md/bcache/super.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/md/bcache/super.c +8 -1
index 690aeb09bbf55..32498b912ce7c 100644
@@ -1780,7 +1780,14 @@ static const char *register_cache_set(struct cache *ca)
 	    sysfs_create_link(&c->kobj, &ca->kobj, buf))
 		goto err;
 
-	if (ca->sb.seq > c->sb.seq) {
+	/*
+	 * A special case is both ca->sb.seq and c->sb.seq are 0,
+	 * such condition happens on a new created cache device whose
+	 * super block is never flushed yet. In this case c->sb.version
+	 * and other members should be updated too, otherwise we will
+	 * have a mistaken super block version in cache set.
+	 */
+	if (ca->sb.seq > c->sb.seq || c->sb.seq == 0) {
 		c->sb.version		= ca->sb.version;
 		memcpy(c->sb.set_uuid, ca->sb.set_uuid, 16);
 		c->sb.flags             = ca->sb.flags;
Signature · 1 line
2.25.1
author maintainer
#81 lore raw

PATCH 81/228 agp/intel: Fix a memory leak on module initialisation failure

In reply to Greg Kroah-Hartman

From: Qiushi Wu <[email protected]>

[ Upstream commit b975abbd382fe442713a4c233549abb90e57c22b ]

In intel_gtt_setup_scratch_page(), pointer "page" is not released if pci_dma_mapping_error() return an error, leading to a memory leak on module initialisation failure. Simply fix this issue by freeing "page" before return.

---
 drivers/char/agp/intel-gtt.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/char/agp/intel-gtt.c +3 -1
index 7516ba981b635..34cc853772bc4 100644
@@ -304,8 +304,10 @@ static int intel_gtt_setup_scratch_page(void)
 	if (intel_private.needs_dmar) {
 		dma_addr = pci_map_page(intel_private.pcidev, page, 0,
 				    PAGE_SIZE, PCI_DMA_BIDIRECTIONAL);
-		if (pci_dma_mapping_error(intel_private.pcidev, dma_addr))
+		if (pci_dma_mapping_error(intel_private.pcidev, dma_addr)) {
+			__free_page(page);
 			return -EINVAL;
+		}
 
 		intel_private.scratch_page_dma = dma_addr;
 	} else
Signature · 1 line
2.25.1
author maintainer
#55 lore raw

PATCH 55/228 platform/x86: intel-hid: Fix return value check in check_acpi_dev()

In reply to Greg Kroah-Hartman

From: Lu Wei <[email protected]>

[ Upstream commit 71fbe886ce6dd0be17f20aded9c63fe58edd2806 ]

In the function check_acpi_dev(), if it fails to create platform device, the return value is ERR_PTR() or NULL. Thus it must use IS_ERR_OR_NULL() to check return value.

Fixes ecc83e52b28c ("intel-hid: new hid event driver for hotkeys")
---
 drivers/platform/x86/intel-hid.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/platform/x86/intel-hid.c +1 -1
index e34fd70b67afe..3add7b3f9658b 100644
@@ -366,7 +366,7 @@ check_acpi_dev(acpi_handle handle, u32 lvl, void *context, void **rv)
 		return AE_OK;
 
 	if (acpi_match_device_ids(dev, ids) == 0)
-		if (acpi_create_platform_device(dev, NULL))
+		if (!IS_ERR_OR_NULL(acpi_create_platform_device(dev, NULL)))
 			dev_info(&dev->dev,
 				 "intel-hid: created platform device\n");
 
Signature · 1 line
2.25.1
author maintainer
#59 lore raw

PATCH 59/228 ARM: socfpga: PM: add missing put_device() call in socfpga_setup_ocram_self_refresh()

In reply to Greg Kroah-Hartman

From: Yu Kuai <[email protected]>

[ Upstream commit 3ad7b4e8f89d6bcc9887ca701cf2745a6aedb1a0 ]

if of_find_device_by_node() succeed, socfpga_setup_ocram_self_refresh doesn't have a corresponding put_device(). Thus add a jump target to fix the exception handling for this function implementation.

Fixes 44fd8c7d4005 ("ARM: socfpga: support suspend to ram")
---
 arch/arm/mach-socfpga/pm.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
arch/arm/mach-socfpga/pm.c +5 -3
index c378ab0c24317..93f2245c97750 100644
@@ -60,14 +60,14 @@ static int socfpga_setup_ocram_self_refresh(void)
 	if (!ocram_pool) {
 		pr_warn("%s: ocram pool unavailable!\n", __func__);
 		ret = -ENODEV;
-		goto put_node;
+		goto put_device;
 	}
 
 	ocram_base = gen_pool_alloc(ocram_pool, socfpga_sdram_self_refresh_sz);
 	if (!ocram_base) {
 		pr_warn("%s: unable to alloc ocram!\n", __func__);
 		ret = -ENOMEM;
-		goto put_node;
+		goto put_device;
 	}
 
 	ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base);
@@ -78,7 +78,7 @@ static int socfpga_setup_ocram_self_refresh(void)
 	if (!suspend_ocram_base) {
 		pr_warn("%s: __arm_ioremap_exec failed!\n", __func__);
 		ret = -ENOMEM;
-		goto put_node;
+		goto put_device;
 	}
 
 	/* Copy the code that puts DDR in self refresh to ocram */
@@ -92,6 +92,8 @@ static int socfpga_setup_ocram_self_refresh(void)
 	if (!socfpga_sdram_self_refresh_in_ocram)
 		ret = -EFAULT;
 
+put_device:
+	put_device(&pdev->dev);
 put_node:
 	of_node_put(np);
 
Signature · 1 line
2.25.1
author maintainer
#60 lore raw

PATCH 60/228 drm/tilcdc: fix leak & null ref in panel_connector_get_modes

In reply to Greg Kroah-Hartman

From: Tomi Valkeinen <[email protected]>

[ Upstream commit 3f9c1c872cc97875ddc8d63bc9fe6ee13652b933 ]

If videomode_from_timings() returns true, the mode allocated with drm_mode_create will be leaked.

Also, the return value of drm_mode_create() is never checked, and thus could cause NULL deref.

Fix these two issues.

---
 drivers/gpu/drm/tilcdc/tilcdc_panel.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/gpu/drm/tilcdc/tilcdc_panel.c +5 -1
index 1813a3623ce60..0484b2cf0e2b5 100644
@@ -152,12 +152,16 @@ static int panel_connector_get_modes(struct drm_connector *connector)
 	int i;
 
 	for (i = 0; i < timings->num_timings; i++) {
-		struct drm_display_mode *mode = drm_mode_create(dev);
+		struct drm_display_mode *mode;
 		struct videomode vm;
 
 		if (videomode_from_timings(timings, &vm, i))
 			break;
 
+		mode = drm_mode_create(dev);
+		if (!mode)
+			break;
+
 		drm_display_mode_from_videomode(&vm, mode);
 
 		mode->type = DRM_MODE_TYPE_DRIVER;
Signature · 1 line
2.25.1
author maintainer
#61 lore raw

PATCH 61/228 Bluetooth: add a mutex lock to avoid UAF in do_enale_set

In reply to Greg Kroah-Hartman

From: Lihong Kou <[email protected]>

[ Upstream commit f9c70bdc279b191da8d60777c627702c06e4a37d ]

In the case we set or free the global value listen_chan in different threads, we can encounter the UAF problems because the method is not protected by any lock, add one to avoid this bug.

BUG: KASAN: use-after-free in l2cap_chan_close+0x48/0x990
net/bluetooth/l2cap_core.c:730
Read of size 8 at addr ffff888096950000 by task kworker/1:102/2868

CPU: 1 PID: 2868 Comm: kworker/1:102 Not tainted 5.5.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 01/01/2011
Workqueue: events do_enable_set
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1fb/0x318 lib/dump_stack.c:118
 print_address_description+0x74/0x5c0 mm/kasan/report.c:374
 __kasan_report+0x149/0x1c0 mm/kasan/report.c:506
 kasan_report+0x26/0x50 mm/kasan/common.c:641
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135
 l2cap_chan_close+0x48/0x990 net/bluetooth/l2cap_core.c:730
 do_enable_set+0x660/0x900 net/bluetooth/6lowpan.c:1074
 process_one_work+0x7f5/0x10f0 kernel/workqueue.c:2264
 worker_thread+0xbbc/0x1630 kernel/workqueue.c:2410
 kthread+0x332/0x350 kernel/kthread.c:255
 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

Allocated by task 2870:
 save_stack mm/kasan/common.c:72 [inline]
 set_track mm/kasan/common.c:80 [inline]
 __kasan_kmalloc+0x118/0x1c0 mm/kasan/common.c:515
 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:529
 kmem_cache_alloc_trace+0x221/0x2f0 mm/slab.c:3551
 kmalloc include/linux/slab.h:555 [inline]
 kzalloc include/linux/slab.h:669 [inline]
 l2cap_chan_create+0x50/0x320 net/bluetooth/l2cap_core.c:446
 chan_create net/bluetooth/6lowpan.c:640 [inline]
 bt_6lowpan_listen net/bluetooth/6lowpan.c:959 [inline]
 do_enable_set+0x6a4/0x900 net/bluetooth/6lowpan.c:1078
 process_one_work+0x7f5/0x10f0 kernel/workqueue.c:2264
 worker_thread+0xbbc/0x1630 kernel/workqueue.c:2410
 kthread+0x332/0x350 kernel/kthread.c:255
 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

Freed by task 2870:
 save_stack mm/kasan/common.c:72 [inline]
 set_track mm/kasan/common.c:80 [inline]
 kasan_set_free_info mm/kasan/common.c:337 [inline]
 __kasan_slab_free+0x12e/0x1e0 mm/kasan/common.c:476
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:485
 __cache_free mm/slab.c:3426 [inline]
 kfree+0x10d/0x220 mm/slab.c:3757
 l2cap_chan_destroy net/bluetooth/l2cap_core.c:484 [inline]
 kref_put include/linux/kref.h:65 [inline]
 l2cap_chan_put+0x170/0x190 net/bluetooth/l2cap_core.c:498
 do_enable_set+0x66c/0x900 net/bluetooth/6lowpan.c:1075
 process_one_work+0x7f5/0x10f0 kernel/workqueue.c:2264
 worker_thread+0xbbc/0x1630 kernel/workqueue.c:2410
 kthread+0x332/0x350 kernel/kthread.c:255
 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

The buggy address belongs to the object at ffff888096950000
 which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 0 bytes inside of
 2048-byte region [ffff888096950000, ffff888096950800)
The buggy address belongs to the page:
page:ffffea00025a5400 refcount:1 mapcount:0 mapping:ffff8880aa400e00 index:0x0
flags: 0xfffe0000000200(slab)
raw: 00fffe0000000200 ffffea00027d1548 ffffea0002397808 ffff8880aa400e00
raw: 0000000000000000 ffff888096950000 0000000100000001 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88809694ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff88809694ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff888096950000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                   ^
 ffff888096950080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff888096950100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
---
 net/bluetooth/6lowpan.c | 5 +++++
 1 file changed, 5 insertions(+)
net/bluetooth/6lowpan.c +5 -0
index 357475cceec61..9a75f9b00b512 100644
@@ -57,6 +57,7 @@ static bool enable_6lowpan;
 /* We are listening incoming connections via this channel
  */
 static struct l2cap_chan *listen_chan;
+static DEFINE_MUTEX(set_lock);
 
 struct lowpan_peer {
 	struct list_head list;
@@ -1082,12 +1083,14 @@ static void do_enable_set(struct work_struct *work)
 
 	enable_6lowpan = set_enable->flag;
 
+	mutex_lock(&set_lock);
 	if (listen_chan) {
 		l2cap_chan_close(listen_chan, 0);
 		l2cap_chan_put(listen_chan);
 	}
 
 	listen_chan = bt_6lowpan_listen();
+	mutex_unlock(&set_lock);
 
 	kfree(set_enable);
 }
@@ -1139,11 +1142,13 @@ static ssize_t lowpan_control_write(struct file *fp,
 		if (ret == -EINVAL)
 			return ret;
 
+		mutex_lock(&set_lock);
 		if (listen_chan) {
 			l2cap_chan_close(listen_chan, 0);
 			l2cap_chan_put(listen_chan);
 			listen_chan = NULL;
 		}
+		mutex_unlock(&set_lock);
 
 		if (conn) {
 			struct lowpan_peer *peer;
Signature · 1 line
2.25.1
author maintainer
#52 lore raw

PATCH 52/228 arm64: dts: exynos: Fix silent hang after boot on Espresso

In reply to Greg Kroah-Hartman

From: Alim Akhtar <[email protected]>

[ Upstream commit b072714bfc0e42c984b8fd6e069f3ca17de8137a ]

Once regulators are disabled after kernel boot, on Espresso board silent hang observed because of LDO7 being disabled. LDO7 actually provide power to CPU cores and non-cpu blocks circuitries. Keep this regulator always-on to fix this hang.

Fixes 9589f7721e16 ("arm64: dts: Add S2MPS15 PMIC node on exynos7-espresso")
---
 arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/exynos/exynos7-espresso.dts +1 -0
index 4a8b1fb51243c..c8824b918693d 100644
@@ -155,6 +155,7 @@ ldo7_reg: LDO7 {
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <1150000>;
 				regulator-enable-ramp-delay = <125>;
+				regulator-always-on;
 			};
 
 			ldo8_reg: LDO8 {
Signature · 1 line
2.25.1
author maintainer
#86 lore raw

PATCH 86/228 drm/arm: fix unintentional integer overflow on left shift

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit 5f368ddea6fec519bdb93b5368f6a844b6ea27a6 ]

Shifting the integer value 1 is evaluated using 32-bit arithmetic and then used in an expression that expects a long value leads to a potential integer overflow. Fix this by using the BIT macro to perform the shift to avoid the overflow.

Addresses-Coverity: ("Unintentional integer overflow")

---
 drivers/gpu/drm/arm/malidp_planes.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/arm/malidp_planes.c +1 -1
index 16b8b310ae5c7..7072d738b072b 100644
@@ -369,7 +369,7 @@ int malidp_de_planes_init(struct drm_device *drm)
 	const struct malidp_hw_regmap *map = &malidp->dev->map;
 	struct malidp_plane *plane = NULL;
 	enum drm_plane_type plane_type;
-	unsigned long crtcs = 1 << drm->mode_config.num_crtc;
+	unsigned long crtcs = BIT(drm->mode_config.num_crtc);
 	unsigned long flags = DRM_MODE_ROTATE_0 | DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_180 |
 			      DRM_MODE_ROTATE_270 | DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y;
 	u32 *formats;
Signature · 1 line
2.25.1
author maintainer
#95 lore raw

PATCH 95/228 scsi: eesox: Fix different dev_id between request_irq() and free_irq()

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit 86f2da1112ccf744ad9068b1d5d9843faf8ddee6 ]

The dev_id used in request_irq() and free_irq() should match. Use 'info' in both cases.

---
 drivers/scsi/arm/eesox.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/arm/eesox.c +1 -1
index e93e047f43165..65bb34ce93b94 100644
@@ -575,7 +575,7 @@ static int eesoxscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
 
 	if (info->info.scsi.dma != NO_DMA)
 		free_dma(info->info.scsi.dma);
-	free_irq(ec->irq, host);
+	free_irq(ec->irq, info);
 
  out_remove:
 	fas216_remove(host);
Signature · 1 line
2.25.1
author maintainer
#98 lore raw

PATCH 98/228 media: exynos4-is: Add missed check for pinctrl_lookup_state()

In reply to Greg Kroah-Hartman

From: Chuhong Yuan <[email protected]>

[ Upstream commit 18ffec750578f7447c288647d7282c7d12b1d969 ]

fimc_md_get_pinctrl() misses a check for pinctrl_lookup_state(). Add the missed check to fix it.

Fixes 4163851f7b99 ("[media] s5p-fimc: Use pinctrl API for camera ports configuration]")
---
 drivers/media/platform/exynos4-is/media-dev.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/media/platform/exynos4-is/media-dev.c +3 -0
index b2eb830c0360a..f772c9b92d9ba 100644
@@ -1258,6 +1258,9 @@ static int fimc_md_get_pinctrl(struct fimc_md *fmd)
 
 	pctl->state_idle = pinctrl_lookup_state(pctl->pinctrl,
 					PINCTRL_STATE_IDLE);
+	if (IS_ERR(pctl->state_idle))
+		return PTR_ERR(pctl->state_idle);
+
 	return 0;
 }
 
Signature · 1 line
2.25.1
author maintainer
#99 lore raw

PATCH 99/228 xfs: fix reflink quota reservation accounting error

In reply to Greg Kroah-Hartman

From: Darrick J. Wong <[email protected]>

[ Upstream commit 83895227aba1ade33e81f586aa7b6b1e143096a5 ]

Quota reservations are supposed to account for the blocks that might be allocated due to a bmap btree split. Reflink doesn't do this, so fix this to make the quota accounting more accurate before we start rearranging things.

Fixes 862bb360ef56 ("xfs: reflink extents from one file to another")
---
 fs/xfs/xfs_reflink.c | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)
fs/xfs/xfs_reflink.c +14 -7
index db7f9fdd20a30..4d37f1b59436c 100644
@@ -1076,6 +1076,7 @@ xfs_reflink_remap_extent(
 	xfs_filblks_t		rlen;
 	xfs_filblks_t		unmap_len;
 	xfs_off_t		newlen;
+	int64_t			qres;
 	int			error;
 
 	unmap_len = irec->br_startoff + irec->br_blockcount - destoff;
@@ -1098,13 +1099,19 @@ xfs_reflink_remap_extent(
 	xfs_ilock(ip, XFS_ILOCK_EXCL);
 	xfs_trans_ijoin(tp, ip, 0);
 
-	/* If we're not just clearing space, then do we have enough quota? */
-	if (real_extent) {
-		error = xfs_trans_reserve_quota_nblks(tp, ip,
-				irec->br_blockcount, 0, XFS_QMOPT_RES_REGBLKS);
-		if (error)
-			goto out_cancel;
-	}
+	/*
+	 * Reserve quota for this operation.  We don't know if the first unmap
+	 * in the dest file will cause a bmap btree split, so we always reserve
+	 * at least enough blocks for that split.  If the extent being mapped
+	 * in is written, we need to reserve quota for that too.
+	 */
+	qres = XFS_EXTENTADD_SPACE_RES(mp, XFS_DATA_FORK);
+	if (real_extent)
+		qres += irec->br_blockcount;
+	error = xfs_trans_reserve_quota_nblks(tp, ip, qres, 0,
+			XFS_QMOPT_RES_REGBLKS);
+	if (error)
+		goto out_cancel;
 
 	trace_xfs_reflink_remap(ip, irec->br_startoff,
 				irec->br_blockcount, irec->br_startblock);
Signature · 1 line
2.25.1
author maintainer
#101 lore raw

PATCH 101/228 leds: core: Flush scheduled work for system suspend

In reply to Greg Kroah-Hartman

From: Kai-Heng Feng <[email protected]>

[ Upstream commit 302a085c20194bfa7df52e0fe684ee0c41da02e6 ]

Sometimes LED won't be turned off by LED_CORE_SUSPENDRESUME flag upon system suspend.

led_set_brightness_nopm() uses schedule_work() to set LED brightness. However, there's no guarantee that the scheduled work gets executed because no one flushes the work.

So flush the scheduled work to make sure LED gets turned off.

Fixes 81fe8e5b73e3 ("leds: core: Add led_set_brightness_nosleep{nopm} functions")
---
 drivers/leds/led-class.c | 1 +
 1 file changed, 1 insertion(+)
drivers/leds/led-class.c +1 -0
index b0e2d55acbd6f..6c7269fcfa77c 100644
@@ -173,6 +173,7 @@ void led_classdev_suspend(struct led_classdev *led_cdev)
 {
 	led_cdev->flags |= LED_SUSPENDED;
 	led_set_brightness_nopm(led_cdev, 0);
+	flush_work(&led_cdev->set_brightness_work);
 }
 EXPORT_SYMBOL_GPL(led_classdev_suspend);
 
Signature · 1 line
2.25.1
author maintainer
#102 lore raw

PATCH 102/228 drm: panel: simple: Fix bpc for LG LB070WV8 panel

In reply to Greg Kroah-Hartman

From: Laurent Pinchart <[email protected]>

[ Upstream commit a6ae2fe5c9f9fd355a48fb7d21c863e5b20d6c9c ]

The LG LB070WV8 panel incorrectly reports a 16 bits per component value, while the panel uses 8 bits per component. Fix it.

Fixes dd0150026901 ("drm/panel: simple: Add support for LG LB070WV8 800x480 7" panel")
---
 drivers/gpu/drm/panel/panel-simple.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/panel/panel-simple.c +1 -1
index c1daed3fe8428..6df312ba1826b 100644
@@ -1253,7 +1253,7 @@ static const struct drm_display_mode lg_lb070wv8_mode = {
 static const struct panel_desc lg_lb070wv8 = {
 	.modes = &lg_lb070wv8_mode,
 	.num_modes = 1,
-	.bpc = 16,
+	.bpc = 8,
 	.size = {
 		.width = 151,
 		.height = 91,
Signature · 1 line
2.25.1
author maintainer
#104 lore raw

PATCH 104/228 scsi: scsi_debug: Add check for sdebug_max_queue during module init

In reply to Greg Kroah-Hartman

From: John Garry <[email protected]>

[ Upstream commit c87bf24cfb60bce27b4d2c7e56ebfd86fb9d16bb ]

sdebug_max_queue should not exceed SDEBUG_CANQUEUE, otherwise crashes like this can be triggered by passing an out-of-range value:

Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.16.01 03/15/2019
 pstate: 20400009 (nzCv daif +PAN -UAO BTYPE=--)
 pc : schedule_resp+0x2a4/0xa70 [scsi_debug]
 lr : schedule_resp+0x52c/0xa70 [scsi_debug]
 sp : ffff800022ab36f0
 x29: ffff800022ab36f0 x28: ffff0023a935a610
 x27: ffff800008e0a648 x26: 0000000000000003
 x25: ffff0023e84f3200 x24: 00000000003d0900
 x23: 0000000000000000 x22: 0000000000000000
 x21: ffff0023be60a320 x20: ffff0023be60b538
 x19: ffff800008e13000 x18: 0000000000000000
 x17: 0000000000000000 x16: 0000000000000000
 x15: 0000000000000000 x14: 0000000000000000
 x13: 0000000000000000 x12: 0000000000000000
 x11: 0000000000000000 x10: 0000000000000000
 x9 : 0000000000000001 x8 : 0000000000000000
 x7 : 0000000000000000 x6 : 00000000000000c1
 x5 : 0000020000200000 x4 : dead0000000000ff
 x3 : 0000000000000200 x2 : 0000000000000200
 x1 : ffff800008e13d88 x0 : 0000000000000000
 Call trace:
schedule_resp+0x2a4/0xa70 [scsi_debug]
scsi_debug_queuecommand+0x2c4/0x9e0 [scsi_debug]
scsi_queue_rq+0x698/0x840
__blk_mq_try_issue_directly+0x108/0x228
blk_mq_request_issue_directly+0x58/0x98
blk_mq_try_issue_list_directly+0x5c/0xf0
blk_mq_sched_insert_requests+0x18c/0x200
blk_mq_flush_plug_list+0x11c/0x190
blk_flush_plug_list+0xdc/0x110
blk_finish_plug+0x38/0x210
blkdev_direct_IO+0x450/0x4d8
generic_file_read_iter+0x84/0x180
blkdev_read_iter+0x3c/0x50
aio_read+0xc0/0x170
io_submit_one+0x5c8/0xc98
__arm64_sys_io_submit+0x1b0/0x258
el0_svc_common.constprop.3+0x68/0x170
do_el0_svc+0x24/0x90
el0_sync_handler+0x13c/0x1a8
el0_sync+0x158/0x180
 Code: 528847e0 72a001e0 6b00003f 540018cd (3941c340)

In addition, it should not be less than 1.

So add checks for these, and fail the module init for those cases.

[mkp: changed if condition to match error message]

---
 drivers/scsi/scsi_debug.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/scsi/scsi_debug.c +6 -0
index ac936b5ca74e5..aba1a3396890b 100644
@@ -4993,6 +4993,12 @@ static int __init scsi_debug_init(void)
 		pr_err("submit_queues must be 1 or more\n");
 		return -EINVAL;
 	}
+
+	if ((sdebug_max_queue > SDEBUG_CANQUEUE) || (sdebug_max_queue < 1)) {
+		pr_err("max_queue must be in range [1, %d]\n", SDEBUG_CANQUEUE);
+		return -EINVAL;
+	}
+
 	sdebug_q_arr = kcalloc(submit_queues, sizeof(struct sdebug_queue),
 			       GFP_KERNEL);
 	if (sdebug_q_arr == NULL)
Signature · 1 line
2.25.1
author maintainer
#87 lore raw

PATCH 87/228 leds: lm355x: avoid enum conversion warning

In reply to Greg Kroah-Hartman

From: Arnd Bergmann <[email protected]>

[ Upstream commit 985b1f596f9ed56f42b8c2280005f943e1434c06 ]

clang points out that doing arithmetic between diffent enums is usually a mistake:

drivers/leds/leds-lm355x.c:167:28: warning: bitwise operation between different enumeration types ('enum lm355x_tx2' and 'enum lm355x_ntc') [-Wenum-enum-conversion]

                reg_val = pdata->pin_tx2 | pdata->ntc_pin;
                          ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~
drivers/leds/leds-lm355x.c:178:28: warning: bitwise operation between different enumeration types ('enum lm355x_tx2' and 'enum lm355x_ntc') [-Wenum-enum-conversion]
                reg_val = pdata->pin_tx2 | pdata->ntc_pin | pdata->pass_mode;
                          ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~

In this driver, it is intentional, so add a cast to hide the false-positive warning. It appears to be the only instance of this warning at the moment.

Fixes b98d13c72592 ("leds: Add new LED driver for lm355x chips")
---
 drivers/leds/leds-lm355x.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/leds/leds-lm355x.c +4 -3
index 6cb94f9a2f3f3..b9c60dd2b1327 100644
@@ -168,18 +168,19 @@ static int lm355x_chip_init(struct lm355x_chip_data *chip)
 	/* input and output pins configuration */
 	switch (chip->type) {
 	case CHIP_LM3554:
-		reg_val = pdata->pin_tx2 | pdata->ntc_pin;
+		reg_val = (u32)pdata->pin_tx2 | (u32)pdata->ntc_pin;
 		ret = regmap_update_bits(chip->regmap, 0xE0, 0x28, reg_val);
 		if (ret < 0)
 			goto out;
-		reg_val = pdata->pass_mode;
+		reg_val = (u32)pdata->pass_mode;
 		ret = regmap_update_bits(chip->regmap, 0xA0, 0x04, reg_val);
 		if (ret < 0)
 			goto out;
 		break;
 
 	case CHIP_LM3556:
-		reg_val = pdata->pin_tx2 | pdata->ntc_pin | pdata->pass_mode;
+		reg_val = (u32)pdata->pin_tx2 | (u32)pdata->ntc_pin |
+		          (u32)pdata->pass_mode;
 		ret = regmap_update_bits(chip->regmap, 0x0A, 0xC4, reg_val);
 		if (ret < 0)
 			goto out;
Signature · 1 line
2.25.1
author maintainer
#105 lore raw

PATCH 105/228 mwifiex: Prevent memory corruption handling keys

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit e18696786548244914f36ec3c46ac99c53df99c3 ]

The length of the key comes from the network and it's a 16 bit number. It needs to be capped to prevent a buffer overflow.

Fixes 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
---
 .../wireless/marvell/mwifiex/sta_cmdresp.c    | 22 +++++++++++++------
 1 file changed, 15 insertions(+), 7 deletions(-)
drivers/net/wireless/marvell/mwifiex/sta_cmdresp.c +15 -7
index 0fba5b10ef2d7..19ce279df24d9 100644
@@ -585,6 +585,11 @@ static int mwifiex_ret_802_11_key_material_v1(struct mwifiex_private *priv,
 {
 	struct host_cmd_ds_802_11_key_material *key =
 						&resp->params.key_material;
+	int len;
+
+	len = le16_to_cpu(key->key_param_set.key_len);
+	if (len > sizeof(key->key_param_set.key))
+		return -EINVAL;
 
 	if (le16_to_cpu(key->action) == HostCmd_ACT_GEN_SET) {
 		if ((le16_to_cpu(key->key_param_set.key_info) & KEY_MCAST)) {
@@ -598,9 +603,8 @@ static int mwifiex_ret_802_11_key_material_v1(struct mwifiex_private *priv,
 
 	memset(priv->aes_key.key_param_set.key, 0,
 	       sizeof(key->key_param_set.key));
-	priv->aes_key.key_param_set.key_len = key->key_param_set.key_len;
-	memcpy(priv->aes_key.key_param_set.key, key->key_param_set.key,
-	       le16_to_cpu(priv->aes_key.key_param_set.key_len));
+	priv->aes_key.key_param_set.key_len = cpu_to_le16(len);
+	memcpy(priv->aes_key.key_param_set.key, key->key_param_set.key, len);
 
 	return 0;
 }
@@ -615,9 +619,14 @@ static int mwifiex_ret_802_11_key_material_v2(struct mwifiex_private *priv,
 					      struct host_cmd_ds_command *resp)
 {
 	struct host_cmd_ds_802_11_key_material_v2 *key_v2;
-	__le16 len;
+	int len;
 
 	key_v2 = &resp->params.key_material_v2;
+
+	len = le16_to_cpu(key_v2->key_param_set.key_params.aes.key_len);
+	if (len > WLAN_KEY_LEN_CCMP)
+		return -EINVAL;
+
 	if (le16_to_cpu(key_v2->action) == HostCmd_ACT_GEN_SET) {
 		if ((le16_to_cpu(key_v2->key_param_set.key_info) & KEY_MCAST)) {
 			mwifiex_dbg(priv->adapter, INFO, "info: key: GTK is set\n");
@@ -633,10 +642,9 @@ static int mwifiex_ret_802_11_key_material_v2(struct mwifiex_private *priv,
 	memset(priv->aes_key_v2.key_param_set.key_params.aes.key, 0,
 	       WLAN_KEY_LEN_CCMP);
 	priv->aes_key_v2.key_param_set.key_params.aes.key_len =
-				key_v2->key_param_set.key_params.aes.key_len;
-	len = priv->aes_key_v2.key_param_set.key_params.aes.key_len;
+				cpu_to_le16(len);
 	memcpy(priv->aes_key_v2.key_param_set.key_params.aes.key,
-	       key_v2->key_param_set.key_params.aes.key, le16_to_cpu(len));
+	       key_v2->key_param_set.key_params.aes.key, len);
 
 	return 0;
 }
Signature · 1 line
2.25.1
author maintainer
#103 lore raw

PATCH 103/228 drm/bridge: sil_sii8620: initialize return of sii8620_readb

In reply to Greg Kroah-Hartman

From: Tom Rix <[email protected]>

[ Upstream commit 02cd2d3144653e6e2a0c7ccaa73311e48e2dc686 ]

clang static analysis flags this error

sil-sii8620.c:184:2: warning: Undefined or garbage value
returned to caller [core.uninitialized.UndefReturn]

        return ret;
        ^~~~~~~~~~

sii8620_readb calls sii8620_read_buf. sii8620_read_buf can return without setting its output pararmeter 'ret'.

So initialize ret.

---
 drivers/gpu/drm/bridge/sil-sii8620.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/bridge/sil-sii8620.c +1 -1
index 0cb69ee94ac16..b93486892f4ae 100644
@@ -167,7 +167,7 @@ static void sii8620_read_buf(struct sii8620 *ctx, u16 addr, u8 *buf, int len)
 
 static u8 sii8620_readb(struct sii8620 *ctx, u16 addr)
 {
-	u8 ret;
+	u8 ret = 0;
 
 	sii8620_read_buf(ctx, addr, &ret, 1);
 	return ret;
Signature · 1 line
2.25.1
author maintainer
#109 lore raw

PATCH 109/228 drm/imx: tve: fix regulator_disable error path

In reply to Greg Kroah-Hartman

From: Marco Felsch <[email protected]>

[ Upstream commit 7bb58b987fee26da2a1665c01033022624986b7c ]

Add missing regulator_disable() as devm_action to avoid dedicated unbind() callback and fix the missing error handling.

Fixes fcbc51e54d2a ("staging: drm/imx: Add support for Television Encoder (TVEv2)")
---
 drivers/gpu/drm/imx/imx-tve.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)
drivers/gpu/drm/imx/imx-tve.c +10 -10
index bc27c26994641..c22c3e6e9b7ac 100644
@@ -498,6 +498,13 @@ static int imx_tve_register(struct drm_device *drm, struct imx_tve *tve)
 	return 0;
 }
 
+static void imx_tve_disable_regulator(void *data)
+{
+	struct imx_tve *tve = data;
+
+	regulator_disable(tve->dac_reg);
+}
+
 static bool imx_tve_readable_reg(struct device *dev, unsigned int reg)
 {
 	return (reg % 4 == 0) && (reg <= 0xdc);
@@ -622,6 +629,9 @@ static int imx_tve_bind(struct device *dev, struct device *master, void *data)
 		ret = regulator_enable(tve->dac_reg);
 		if (ret)
 			return ret;
+		ret = devm_add_action_or_reset(dev, imx_tve_disable_regulator, tve);
+		if (ret)
+			return ret;
 	}
 
 	tve->clk = devm_clk_get(dev, "tve");
@@ -668,18 +678,8 @@ static int imx_tve_bind(struct device *dev, struct device *master, void *data)
 	return 0;
 }
 
-static void imx_tve_unbind(struct device *dev, struct device *master,
-	void *data)
-{
-	struct imx_tve *tve = dev_get_drvdata(dev);
-
-	if (!IS_ERR(tve->dac_reg))
-		regulator_disable(tve->dac_reg);
-}
-
 static const struct component_ops imx_tve_ops = {
 	.bind	= imx_tve_bind,
-	.unbind	= imx_tve_unbind,
 };
 
 static int imx_tve_probe(struct platform_device *pdev)
Signature · 1 line
2.25.1
author maintainer
#113 lore raw

PATCH 113/228 MIPS: OCTEON: add missing put_device() call in dwc3_octeon_device_init()

In reply to Greg Kroah-Hartman

From: Yu Kuai <[email protected]>

[ Upstream commit e8b9fc10f2615b9a525fce56981e40b489528355 ]

if of_find_device_by_node() succeed, dwc3_octeon_device_init() doesn't have a corresponding put_device(). Thus add put_device() to fix the exception handling for this function implementation.

Fixes 93e502b3c2d4 ("MIPS: OCTEON: Platform support for OCTEON III USB controller")
---
 arch/mips/cavium-octeon/octeon-usb.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
arch/mips/cavium-octeon/octeon-usb.c +4 -1
index bfdfaf32d2c49..75189ff2f3c78 100644
@@ -517,6 +517,7 @@ static int __init dwc3_octeon_device_init(void)
 
 			res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 			if (res == NULL) {
+				put_device(&pdev->dev);
 				dev_err(&pdev->dev, "No memory resources\n");
 				return -ENXIO;
 			}
@@ -528,8 +529,10 @@ static int __init dwc3_octeon_device_init(void)
 			 * know the difference.
 			 */
 			base = devm_ioremap_resource(&pdev->dev, res);
-			if (IS_ERR(base))
+			if (IS_ERR(base)) {
+				put_device(&pdev->dev);
 				return PTR_ERR(base);
+			}
 
 			mutex_lock(&dwc3_octeon_clocks_mutex);
 			dwc3_octeon_clocks_start(&pdev->dev, (u64)base);
Signature · 1 line
2.25.1
author maintainer
#88 lore raw

PATCH 88/228 media: omap3isp: Add missed v4l2_ctrl_handler_free() for preview_init_entities()

In reply to Greg Kroah-Hartman

From: Chuhong Yuan <[email protected]>

[ Upstream commit dc7690a73017e1236202022e26a6aa133f239c8c ]

preview_init_entities() does not call v4l2_ctrl_handler_free() when it fails.
Add the missed function to fix it.

Fixes de1135d44f4f ("[media] omap3isp: CCDC, preview engine and resizer")
---
 drivers/media/platform/omap3isp/isppreview.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/media/platform/omap3isp/isppreview.c +3 -1
index e981eb2330f18..ac005ae4d21b4 100644
@@ -2290,7 +2290,7 @@ static int preview_init_entities(struct isp_prev_device *prev)
 	me->ops = &preview_media_ops;
 	ret = media_entity_pads_init(me, PREV_PADS_NUM, pads);
 	if (ret < 0)
-		return ret;
+		goto error_handler_free;
 
 	preview_init_formats(sd, NULL);
 
@@ -2323,6 +2323,8 @@ static int preview_init_entities(struct isp_prev_device *prev)
 	omap3isp_video_cleanup(&prev->video_in);
 error_video_in:
 	media_entity_cleanup(&prev->subdev.entity);
+error_handler_free:
+	v4l2_ctrl_handler_free(&prev->ctrls);
 	return ret;
 }
 
Signature · 1 line
2.25.1
author maintainer
#111 lore raw

PATCH 111/228 thermal: ti-soc-thermal: Fix reversed condition in ti_thermal_expose_sensor()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 0f348db01fdf128813fdd659fcc339038fb421a4 ]

This condition is reversed and will cause breakage.

Fixes 7440f518dad9 ("thermal/drivers/ti-soc-thermal: Avoid dereferencing ERR_PTR")
---
 drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/thermal/ti-soc-thermal/ti-thermal-common.c +1 -1
index fa98c398d70f3..d43fbe4ad767e 100644
@@ -183,7 +183,7 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
 
 	data = ti_bandgap_get_sensor_data(bgp, id);
 
-	if (!IS_ERR_OR_NULL(data))
+	if (IS_ERR_OR_NULL(data))
 		data = ti_thermal_build_data(bgp, id);
 
 	if (!data)
Signature · 1 line
2.25.1
author maintainer
#115 lore raw

PATCH 115/228 scsi: mesh: Fix panic after host or bus reset

In reply to Greg Kroah-Hartman

From: Finn Thain <[email protected]>

[ Upstream commit edd7dd2292ab9c3628b65c4d04514c3068ad54f6 ]

Booting Linux with a Conner CP3200 drive attached to the MESH SCSI bus results in EH measures and a panic:

[   25.499838] mesh: configured for synchronous 5 MB/s
[   25.787154] mesh: performing initial bus reset...
[   29.867115] scsi host0: MESH
[   29.929527] mesh: target 0 synchronous at 3.6 MB/s
[   29.998763] scsi 0:0:0:0: Direct-Access     CONNER   CP3200-200mb-3.5 4040 PQ: 0 ANSI: 1 CCS
[   31.989975] sd 0:0:0:0: [sda] 415872 512-byte logical blocks: (213 MB/203 MiB)
[   32.070975] sd 0:0:0:0: [sda] Write Protect is off
[   32.137197] sd 0:0:0:0: [sda] Mode Sense: 5b 00 00 08
[   32.209661] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   32.332708]  sda: [mac] sda1 sda2 sda3
[   32.417733] sd 0:0:0:0: [sda] Attached SCSI disk
... snip ...
[   76.687067] mesh_abort((ptrval))
[   76.743606] mesh: state at (ptrval), regs at (ptrval), dma at (ptrval)
[   76.810798]     ct=6000 seq=86 bs=4017 fc= 0 exc= 0 err= 0 im= 7 int= 0 sp=85
[   76.880720]     dma stat=84e0 cmdptr=1f73d000
[   76.941387]     phase=4 msgphase=0 conn_tgt=0 data_ptr=24576
[   77.005567]     dma_st=1 dma_ct=0 n_msgout=0
[   77.065456]     target 0: req=(ptrval) goes_out=0 saved_ptr=0
[   77.130512] mesh_abort((ptrval))
[   77.187670] mesh: state at (ptrval), regs at (ptrval), dma at (ptrval)
[   77.255594]     ct=6000 seq=86 bs=4017 fc= 0 exc= 0 err= 0 im= 7 int= 0 sp=85
[   77.325778]     dma stat=84e0 cmdptr=1f73d000
[   77.387239]     phase=4 msgphase=0 conn_tgt=0 data_ptr=24576
[   77.453665]     dma_st=1 dma_ct=0 n_msgout=0
[   77.515900]     target 0: req=(ptrval) goes_out=0 saved_ptr=0
[   77.582902] mesh_host_reset
[   88.187083] Kernel panic - not syncing: mesh: double DMA start !
[   88.254510] CPU: 0 PID: 358 Comm: scsi_eh_0 Not tainted 5.6.13-pmac #1
[   88.323302] Call Trace:
[   88.378854] [e16ddc58] [c0027080] panic+0x13c/0x308 (unreliable)
[   88.446221] [e16ddcb8] [c02b2478] mesh_start.part.12+0x130/0x414
[   88.513298] [e16ddcf8] [c02b2fc8] mesh_queue+0x54/0x70
[   88.577097] [e16ddd18] [c02a1848] scsi_send_eh_cmnd+0x374/0x384
[   88.643476] [e16dddc8] [c02a1938] scsi_eh_tur+0x5c/0xb8
[   88.707878] [e16dddf8] [c02a1ab8] scsi_eh_test_devices+0x124/0x178
[   88.775663] [e16dde28] [c02a2094] scsi_eh_ready_devs+0x588/0x8a8
[   88.843124] [e16dde98] [c02a31d8] scsi_error_handler+0x344/0x520
[   88.910697] [e16ddf08] [c00409c8] kthread+0xe4/0xe8
[   88.975166] [e16ddf38] [c000f234] ret_from_kernel_thread+0x14/0x1c
[   89.044112] Rebooting in 180 seconds..

In theory, a panic can happen after a bus or host reset with dma_started flag set. Fix this by halting the DMA before reinitializing the host. Don't assume that ms->current_req is set when halt_dma() is invoked as it may not hold for bus or host reset.

BTW, this particular Conner drive can be made to work by inhibiting disconnect/reselect with 'mesh.resel_targets=0'.

---
 drivers/scsi/mesh.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/scsi/mesh.c +7 -1
index 1753e42826dd9..a880abf5abaad 100644
@@ -1044,6 +1044,8 @@ static void handle_error(struct mesh_state *ms)
 		while ((in_8(&mr->bus_status1) & BS1_RST) != 0)
 			udelay(1);
 		printk("done\n");
+		if (ms->dma_started)
+			halt_dma(ms);
 		handle_reset(ms);
 		/* request_q is empty, no point in mesh_start() */
 		return;
@@ -1356,7 +1358,8 @@ static void halt_dma(struct mesh_state *ms)
 		       ms->conn_tgt, ms->data_ptr, scsi_bufflen(cmd),
 		       ms->tgts[ms->conn_tgt].data_goes_out);
 	}
-	scsi_dma_unmap(cmd);
+	if (cmd)
+		scsi_dma_unmap(cmd);
 	ms->dma_started = 0;
 }
 
@@ -1711,6 +1714,9 @@ static int mesh_host_reset(struct scsi_cmnd *cmd)
 
 	spin_lock_irqsave(ms->host->host_lock, flags);
 
+	if (ms->dma_started)
+		halt_dma(ms);
+
 	/* Reset the controller & dbdma channel */
 	out_le32(&md->control, (RUN|PAUSE|FLUSH|WAKE) << 16);	/* stop dma */
 	out_8(&mr->exception, 0xff);	/* clear all exception bits */
Signature · 1 line
2.25.1
author maintainer
#116 lore raw

PATCH 116/228 net: dsa: mv88e6xxx: MV88E6097 does not support jumbo configuration

In reply to Greg Kroah-Hartman

From: Chris Packham <[email protected]>

[ Upstream commit 0f3c66a3c7b4e8b9f654b3c998e9674376a51b0f ]

The MV88E6097 chip does not support configuring jumbo frames. Prior to commit 5f4366660d65 only the 6352, 6351, 6165 and 6320 chips configured jumbo mode. The refactor accidentally added the function for the 6097. Remove the erroneous function pointer assignment.

Fixes 5f4366660d65 ("net: dsa: mv88e6xxx: Refactor setting of jumbo frames")
---
 drivers/net/dsa/mv88e6xxx/chip.c | 1 -
 1 file changed, 1 deletion(-)
drivers/net/dsa/mv88e6xxx/chip.c +0 -1
index 10ea01459a36b..f4268f0322663 100644
@@ -2450,7 +2450,6 @@ static const struct mv88e6xxx_ops mv88e6097_ops = {
 	.port_set_frame_mode = mv88e6351_port_set_frame_mode,
 	.port_set_egress_floods = mv88e6352_port_set_egress_floods,
 	.port_set_ether_type = mv88e6351_port_set_ether_type,
-	.port_set_jumbo_size = mv88e6165_port_set_jumbo_size,
 	.port_egress_rate_limiting = mv88e6095_port_egress_rate_limiting,
 	.port_pause_limit = mv88e6097_port_pause_limit,
 	.port_disable_learn_limit = mv88e6xxx_port_disable_learn_limit,
Signature · 1 line
2.25.1
author maintainer
#89 lore raw

PATCH 89/228 ASoC: Intel: bxt_rt298: add missing .owner field

In reply to Greg Kroah-Hartman

From: Pierre-Louis Bossart <[email protected]>

[ Upstream commit 88cee34b776f80d2da04afb990c2a28c36799c43 ]

This field is required for ASoC cards. Not setting it will result in a module->name pointer being NULL and generate problems such as

cat /proc/asound/modules
0 (efault)

---
 sound/soc/intel/boards/bxt_rt298.c | 2 ++
 1 file changed, 2 insertions(+)
sound/soc/intel/boards/bxt_rt298.c +2 -0
index 7843104fadcbf..1b01bc318fd25 100644
@@ -529,6 +529,7 @@ static int bxt_card_late_probe(struct snd_soc_card *card)
 /* broxton audio machine driver for SPT + RT298S */
 static struct snd_soc_card broxton_rt298 = {
 	.name = "broxton-rt298",
+	.owner = THIS_MODULE,
 	.dai_link = broxton_rt298_dais,
 	.num_links = ARRAY_SIZE(broxton_rt298_dais),
 	.controls = broxton_controls,
@@ -544,6 +545,7 @@ static struct snd_soc_card broxton_rt298 = {
 
 static struct snd_soc_card geminilake_rt298 = {
 	.name = "geminilake-rt298",
+	.owner = THIS_MODULE,
 	.dai_link = broxton_rt298_dais,
 	.num_links = ARRAY_SIZE(broxton_rt298_dais),
 	.controls = broxton_controls,
Signature · 1 line
2.25.1
author maintainer
#91 lore raw

PATCH 91/228 drm/mipi: use dcs write for mipi_dsi_dcs_set_tear_scanline

In reply to Greg Kroah-Hartman

From: Emil Velikov <[email protected]>

[ Upstream commit 7a05c3b6d24b8460b3cec436cf1d33fac43c8450 ]

The helper uses the MIPI_DCS_SET_TEAR_SCANLINE, although it's currently using the generic write. This does not look right.

Perhaps some platforms don't distinguish between the two writers?

Cc Robert Chiras <[email protected]>
Cc Vinay Simha BN <[email protected]>
Cc Jani Nikula <[email protected]>
Cc Thierry Reding <[email protected]>
Fixes e83950816367 ("drm/dsi: Implement set tear scanline")
---
 drivers/gpu/drm/drm_mipi_dsi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/gpu/drm/drm_mipi_dsi.c +3 -3
index 4b47226b90d4b..6f0de951b75d5 100644
@@ -1029,11 +1029,11 @@ EXPORT_SYMBOL(mipi_dsi_dcs_set_pixel_format);
  */
 int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline)
 {
-	u8 payload[3] = { MIPI_DCS_SET_TEAR_SCANLINE, scanline >> 8,
-			  scanline & 0xff };
+	u8 payload[2] = { scanline >> 8, scanline & 0xff };
 	ssize_t err;
 
-	err = mipi_dsi_generic_write(dsi, payload, sizeof(payload));
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_TEAR_SCANLINE, payload,
+				 sizeof(payload));
 	if (err < 0)
 		return err;
 
Signature · 1 line
2.25.1
author maintainer
#93 lore raw

PATCH 93/228 drm/radeon: fix array out-of-bounds read and write issues

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit 7ee78aff9de13d5dccba133f4a0de5367194b243 ]

There is an off-by-one bounds check on the index into arrays table->mc_reg_address and table->mc_reg_table_entry[k].mc_data[j] that can lead to reads and writes outside of arrays. Fix the bound checking off-by-one error.

Addresses-Coverity: ("Out-of-bounds read/write")

Fixes cc8dbbb4f62a ("drm/radeon: add dpm support for CI dGPUs (v2)")
---
 drivers/gpu/drm/radeon/ci_dpm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/radeon/ci_dpm.c +1 -1
index 6e607cc7b6e5a..81bc2b89222f2 100644
@@ -4342,7 +4342,7 @@ static int ci_set_mc_special_registers(struct radeon_device *rdev,
 					table->mc_reg_table_entry[k].mc_data[j] |= 0x100;
 			}
 			j++;
-			if (j > SMU7_DISCRETE_MC_REGISTER_ARRAY_SIZE)
+			if (j >= SMU7_DISCRETE_MC_REGISTER_ARRAY_SIZE)
 				return -EINVAL;
 
 			if (!pi->mem_gddr5) {
Signature · 1 line
2.25.1
author maintainer
#85 lore raw

PATCH 85/228 iio: improve IIO_CONCENTRATION channel type description

In reply to Greg Kroah-Hartman

From: Tomasz Duszynski <[email protected]>

[ Upstream commit df16c33a4028159d1ba8a7061c9fa950b58d1a61 ]

IIO_CONCENTRATION together with INFO_RAW specifier is used for reporting raw concentrations of pollutants. Raw value should be meaningless before being properly scaled. Because of that description shouldn't mention raw value unit whatsoever.

Fix this by rephrasing existing description so it follows conventions used throughout IIO ABI docs.

Fixes 8ff6b3bc94930 ("iio: chemical: Add IIO_CONCENTRATION channel type")
---
 Documentation/ABI/testing/sysfs-bus-iio | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
Documentation/ABI/testing/sysfs-bus-iio +2 -1
index 64e65450f4833..e21e2ca3e4f91 100644
@@ -1524,7 +1524,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_concentrationX_voc_raw
 KernelVersion:	4.3
 Contact:	[email protected]
 Description:
-		Raw (unscaled no offset etc.) percentage reading of a substance.
+		Raw (unscaled no offset etc.) reading of a substance. Units
+		after application of scale and offset are percents.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_resistance_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_resistanceX_raw
Signature · 1 line
2.25.1
author maintainer
#131 lore raw

PATCH 131/228 fsl/fman: fix dereference null return value

In reply to Greg Kroah-Hartman

From: Florinel Iordache <[email protected]>

[ Upstream commit 0572054617f32670abab4b4e89a876954d54b704 ]

Check before using returned value to avoid dereferencing null pointer.

Fixes 18a6c85fcc78 ("fsl/fman: Add FMan Port Support")
---
 drivers/net/ethernet/freescale/fman/fman_port.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/net/ethernet/freescale/fman/fman_port.c +8 -1
index 495190764155a..ac3d791f52821 100644
@@ -1744,6 +1744,7 @@ static int fman_port_probe(struct platform_device *of_dev)
 	struct fman_port *port;
 	struct fman *fman;
 	struct device_node *fm_node, *port_node;
+	struct platform_device *fm_pdev;
 	struct resource res;
 	struct resource *dev_res;
 	u32 val;
@@ -1768,8 +1769,14 @@ static int fman_port_probe(struct platform_device *of_dev)
 		goto return_err;
 	}
 
-	fman = dev_get_drvdata(&of_find_device_by_node(fm_node)->dev);
+	fm_pdev = of_find_device_by_node(fm_node);
 	of_node_put(fm_node);
+	if (!fm_pdev) {
+		err = -EINVAL;
+		goto return_err;
+	}
+
+	fman = dev_get_drvdata(&fm_pdev->dev);
 	if (!fman) {
 		err = -EINVAL;
 		goto return_err;
Signature · 1 line
2.25.1
author maintainer
#134 lore raw

PATCH 134/228 fsl/fman: fix eth hash table allocation

In reply to Greg Kroah-Hartman

From: Florinel Iordache <[email protected]>

[ Upstream commit 3207f715c34317d08e798e11a10ce816feb53c0f ]

Fix memory allocation for ethernet address hash table. The code was wrongly allocating an array for eth hash table which is incorrect because this is the main structure for eth hash table (struct eth_hash_t) that contains inside a number of elements.

Fixes 57ba4c9b56d8 ("fsl/fman: Add FMan MAC support")
---
 drivers/net/ethernet/freescale/fman/fman_mac.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/freescale/fman/fman_mac.h +1 -1
index dd6d0526f6c1f..19f327efdaff3 100644
@@ -252,7 +252,7 @@ static inline struct eth_hash_t *alloc_hash_table(u16 size)
 	struct eth_hash_t *hash;
 
 	/* Allocate address hash table */
-	hash = kmalloc_array(size, sizeof(struct eth_hash_t *), GFP_KERNEL);
+	hash = kmalloc(sizeof(*hash), GFP_KERNEL);
 	if (!hash)
 		return NULL;
 
Signature · 1 line
2.25.1
author maintainer
#135 lore raw

PATCH 135/228 dlm: Fix kobject memleak

In reply to Greg Kroah-Hartman

From: Wang Hai <[email protected]>

[ Upstream commit 0ffddafc3a3970ef7013696e7f36b3d378bc4c16 ]

Currently the error return path from kobject_init_and_add() is not followed by a call to kobject_put() - which means we are leaking the kobject.

Set do_unreg = 1 before kobject_init_and_add() to ensure that kobject_put() can be called in its error patch.

Fixes 901195ed7f4b ("Kobject: change GFS2 to use kobject_init_and_add")
---
 fs/dlm/lockspace.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
fs/dlm/lockspace.c +3 -3
index 9c8c9a09b4a6d..7a6b0327ceb0b 100644
@@ -633,6 +633,9 @@ static int new_lockspace(const char *name, const char *cluster,
 	wait_event(ls->ls_recover_lock_wait,
 		   test_bit(LSFL_RECOVER_LOCK, &ls->ls_flags));
 
+	/* let kobject handle freeing of ls if there's an error */
+	do_unreg = 1;
+
 	ls->ls_kobj.kset = dlm_kset;
 	error = kobject_init_and_add(&ls->ls_kobj, &dlm_ktype, NULL,
 				     "%s", ls->ls_name);
@@ -640,9 +643,6 @@ static int new_lockspace(const char *name, const char *cluster,
 		goto out_recoverd;
 	kobject_uevent(&ls->ls_kobj, KOBJ_ADD);
 
-	/* let kobject handle freeing of ls if there's an error */
-	do_unreg = 1;
-
 	/* This uevent triggers dlm_controld in userspace to add us to the
 	   group of nodes that are members of this lockspace (managed by the
 	   cluster infrastructure.)  Once it's done that, it tells us who the
Signature · 1 line
2.25.1
author maintainer
#143 lore raw

PATCH 143/228 net: Set fput_needed iff FDPUT_FPUT is set

In reply to Greg Kroah-Hartman

From: Miaohe Lin <[email protected]>

[ Upstream commit ce787a5a074a86f76f5d3fd804fa78e01bfb9e89 ]

We should fput() file iff FDPUT_FPUT is set. So we should set fput_needed accordingly.

Fixes 00e188ef6a7e ("sockfd_lookup_light(): switch to fdget^W^Waway from fget_light")
---
 net/socket.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/socket.c +1 -1
@@ -496,7 +496,7 @@ static struct socket *sockfd_lookup_ligh
 	if (f.file) {
 		sock = sock_from_file(f.file, err);
 		if (likely(sock)) {
-			*fput_needed = f.flags;
+			*fput_needed = f.flags & FDPUT_FPUT;
 			return sock;
 		}
 		fdput(f);
author maintainer
#145 lore raw

PATCH 145/228 USB: serial: cp210x: enable usb generic throttle/unthrottle

In reply to Greg Kroah-Hartman

From: Brant Merryman <[email protected]>

commit 4387b3dbb079d482d3c2b43a703ceed4dd27ed28 upstream.

Assign the .throttle and .unthrottle functions to be generic function in the driver structure to prevent data loss that can otherwise occur if the host does not enable USB throttling.

[ johan: fix up tags ]
Fixes 39a66b8d22a3 ("[PATCH] USB: CP2101 Add support for flow control")
Cc stable <[email protected]> # 2.6.12
---
 drivers/usb/serial/cp210x.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/usb/serial/cp210x.c +2 -0
@@ -271,6 +271,8 @@ static struct usb_serial_driver cp210x_d
 	.break_ctl		= cp210x_break_ctl,
 	.set_termios		= cp210x_set_termios,
 	.tx_empty		= cp210x_tx_empty,
+	.throttle		= usb_serial_generic_throttle,
+	.unthrottle		= usb_serial_generic_unthrottle,
 	.tiocmget		= cp210x_tiocmget,
 	.tiocmset		= cp210x_tiocmset,
 	.attach			= cp210x_attach,
author maintainer
#140 lore raw

PATCH 140/228 drivers/net/wan/lapbether: Added needed_headroom and a skb->len check

In reply to Greg Kroah-Hartman

From: Xie He <[email protected]>

[ Upstream commit c7ca03c216acb14466a713fedf1b9f2c24994ef2 ]

1. Added a skb->len check

This driver expects upper layers to include a pseudo header of 1 byte when passing down a skb for transmission. This driver will read this 1-byte header. This patch added a skb->len check before reading the header to make sure the header exists.

2. Changed to use needed_headroom instead of hard_header_len to request necessary headroom to be allocated

In net/packet/af_packet.c, the function packet_snd first reserves a headroom of length (dev->hard_header_len + dev->needed_headroom). Then if the socket is a SOCK_DGRAM socket, it calls dev_hard_header, which calls dev->header_ops->create, to create the link layer header. If the socket is a SOCK_RAW socket, it "un-reserves" a headroom of length (dev->hard_header_len), and assumes the user to provide the appropriate link layer header.

So according to the logic of af_packet.c, dev->hard_header_len should be the length of the header that would be created by dev->header_ops->create.

However, this driver doesn't provide dev->header_ops, so logically dev->hard_header_len should be 0.

So we should use dev->needed_headroom instead of dev->hard_header_len to request necessary headroom to be allocated.

This change fixes kernel panic when this driver is used with AF_PACKET SOCK_RAW sockets.

Call stack when panic:

[  168.399197] skbuff: skb_under_panic: text:ffffffff819d95fb len:20
put:14 head:ffff8882704c0a00 data:ffff8882704c09fd tail:0x11 end:0xc0
dev:veth0
...
[  168.399255] Call Trace:
[  168.399259]  skb_push.cold+0x14/0x24
[  168.399262]  eth_header+0x2b/0xc0
[  168.399267]  lapbeth_data_transmit+0x9a/0xb0 [lapbether]
[  168.399275]  lapb_data_transmit+0x22/0x2c [lapb]
[  168.399277]  lapb_transmit_buffer+0x71/0xb0 [lapb]
[  168.399279]  lapb_kick+0xe3/0x1c0 [lapb]
[  168.399281]  lapb_data_request+0x76/0xc0 [lapb]
[  168.399283]  lapbeth_xmit+0x56/0x90 [lapbether]
[  168.399286]  dev_hard_start_xmit+0x91/0x1f0
[  168.399289]  ? irq_init_percpu_irqstack+0xc0/0x100
[  168.399291]  __dev_queue_xmit+0x721/0x8e0
[  168.399295]  ? packet_parse_headers.isra.0+0xd2/0x110
[  168.399297]  dev_queue_xmit+0x10/0x20
[  168.399298]  packet_sendmsg+0xbf0/0x19b0

......

---
 drivers/net/wan/lapbether.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/net/wan/lapbether.c +9 -1
@@ -160,6 +160,12 @@ static netdev_tx_t lapbeth_xmit(struct s
 	if (!netif_running(dev))
 		goto drop;
 
+	/* There should be a pseudo header of 1 byte added by upper layers.
+	 * Check to make sure it is there before reading it.
+	 */
+	if (skb->len < 1)
+		goto drop;
+
 	switch (skb->data[0]) {
 	case X25_IFACE_DATA:
 		break;
@@ -308,6 +314,7 @@ static void lapbeth_setup(struct net_dev
 	dev->netdev_ops	     = &lapbeth_netdev_ops;
 	dev->needs_free_netdev = true;
 	dev->type            = ARPHRD_X25;
+	dev->hard_header_len = 0;
 	dev->mtu             = 1000;
 	dev->addr_len        = 0;
 }
@@ -334,7 +341,8 @@ static int lapbeth_new_device(struct net
 	 * then this driver prepends a length field of 2 bytes,
 	 * then the underlying Ethernet device prepends its own header.
 	 */
-	ndev->hard_header_len = -1 + 3 + 2 + dev->hard_header_len;
+	ndev->needed_headroom = -1 + 3 + 2 + dev->hard_header_len
+					   + dev->needed_headroom;
 
 	lapbeth = netdev_priv(ndev);
 	lapbeth->axdev = ndev;
author maintainer
#139 lore raw

PATCH 139/228 af_packet: TPACKET_V3: fix fill status rwlock imbalance

In reply to Greg Kroah-Hartman

From: John Ogness <[email protected]>

[ Upstream commit 88fd1cb80daa20af063bce81e1fad14e945a8dc4 ]

After @blk_fill_in_prog_lock is acquired there is an early out vnet situation that can occur. In that case, the rwlock needs to be released.

Also, since @blk_fill_in_prog_lock is only acquired when @tp_version is exactly TPACKET_V3, only release it on that exact condition as well.

And finally, add sparse annotation so that it is clearer that prb_fill_curr_block() and prb_clear_blk_fill_status() are acquiring and releasing @blk_fill_in_prog_lock, respectively. sparse is still unable to understand the balance, but the warnings are now on a higher level that make more sense.

Fixes 632ca50f2cbd ("af_packet: TPACKET_V3: replace busy-wait loop")
---
 net/packet/af_packet.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
net/packet/af_packet.c +7 -2
@@ -989,6 +989,7 @@ static int prb_queue_frozen(struct tpack
 }
 
 static void prb_clear_blk_fill_status(struct packet_ring_buffer *rb)
+	__releases(&pkc->blk_fill_in_prog_lock)
 {
 	struct tpacket_kbdq_core *pkc  = GET_PBDQC_FROM_RB(rb);
 	atomic_dec(&pkc->blk_fill_in_prog);
@@ -1036,6 +1037,7 @@ static void prb_fill_curr_block(char *cu
 				struct tpacket_kbdq_core *pkc,
 				struct tpacket_block_desc *pbd,
 				unsigned int len)
+	__acquires(&pkc->blk_fill_in_prog_lock)
 {
 	struct tpacket3_hdr *ppd;
 
@@ -2311,8 +2313,11 @@ static int tpacket_rcv(struct sk_buff *s
 	if (do_vnet &&
 	    virtio_net_hdr_from_skb(skb, h.raw + macoff -
 				    sizeof(struct virtio_net_hdr),
-				    vio_le(), true, 0))
+				    vio_le(), true, 0)) {
+		if (po->tp_version == TPACKET_V3)
+			prb_clear_blk_fill_status(&po->rx_ring);
 		goto drop_n_account;
+	}
 
 	if (po->tp_version <= TPACKET_V2) {
 		packet_increment_rx_head(po, &po->rx_ring);
@@ -2418,7 +2423,7 @@ static int tpacket_rcv(struct sk_buff *s
 		__clear_bit(slot_id, po->rx_ring.rx_owner_map);
 		spin_unlock(&sk->sk_receive_queue.lock);
 		sk->sk_data_ready(sk);
-	} else {
+	} else if (po->tp_version == TPACKET_V3) {
 		prb_clear_blk_fill_status(&po->rx_ring);
 	}
 
author maintainer
#138 lore raw

PATCH 138/228 crypto: aesni - add compatibility with IAS

In reply to Greg Kroah-Hartman

From: Jian Cai <[email protected]>

[ Upstream commit 44069737ac9625a0f02f0f7f5ab96aae4cd819bc ]

Clang's integrated assembler complains "invalid reassignment of non-absolute variable 'var_ddq_add'" while assembling arch/x86/crypto/aes_ctrby8_avx-x86_64.S. It was because var_ddq_add was reassigned with non-absolute values several times, which IAS did not support. We can avoid the reassignment by replacing the uses of var_ddq_add with its definitions accordingly to have compatilibility with IAS.

---
 arch/x86/crypto/aes_ctrby8_avx-x86_64.S | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)
arch/x86/crypto/aes_ctrby8_avx-x86_64.S +3 -11
index 5f6a5af9c489b..77043a82da510 100644
@@ -127,10 +127,6 @@ ddq_add_8:
 
 /* generate a unique variable for ddq_add_x */
 
-.macro setddq n
-	var_ddq_add = ddq_add_\n
-.endm
-
 /* generate a unique variable for xmm register */
 .macro setxdata n
 	var_xdata = %xmm\n
@@ -140,9 +136,7 @@ ddq_add_8:
 
 .macro club name, id
 .altmacro
-	.if \name == DDQ_DATA
-		setddq %\id
-	.elseif \name == XDATA
+	.if \name == XDATA
 		setxdata %\id
 	.endif
 .noaltmacro
@@ -165,9 +159,8 @@ ddq_add_8:
 
 	.set i, 1
 	.rept (by - 1)
-		club DDQ_DATA, i
 		club XDATA, i
-		vpaddq	var_ddq_add(%rip), xcounter, var_xdata
+		vpaddq	(ddq_add_1 + 16 * (i - 1))(%rip), xcounter, var_xdata
 		vptest	ddq_low_msk(%rip), var_xdata
 		jnz 1f
 		vpaddq	ddq_high_add_1(%rip), var_xdata, var_xdata
@@ -180,8 +173,7 @@ ddq_add_8:
 	vmovdqa	1*16(p_keys), xkeyA
 
 	vpxor	xkey0, xdata0, xdata0
-	club DDQ_DATA, by
-	vpaddq	var_ddq_add(%rip), xcounter, xcounter
+	vpaddq	(ddq_add_1 + 16 * (by - 1))(%rip), xcounter, xcounter
 	vptest	ddq_low_msk(%rip), xcounter
 	jnz	1f
 	vpaddq	ddq_high_add_1(%rip), xcounter, xcounter
Signature · 1 line
2.25.1
author maintainer
#150 lore raw

PATCH 150/228 crypto: ccp - Fix use of merged scatterlists

In reply to Greg Kroah-Hartman

From: John Allen <[email protected]>

commit 8a302808c60d441d9884cb00ea7f2b534f2e3ca5 upstream.

Running the crypto manager self tests with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS may result in several types of errors when using the ccp-crypto driver:

alg: skcipher: cbc-des3-ccp encryption failed on test vector 0; expected_error=0, actual_error=-5 ...

alg: skcipher: ctr-aes-ccp decryption overran dst buffer on test vector 0 ...

alg: ahash: sha224-ccp test failed (wrong result) on test vector ...

These errors are the result of improper processing of scatterlists mapped for DMA.

Given a scatterlist in which entries are merged as part of mapping the scatterlist for DMA, the DMA length of a merged entry will reflect the combined length of the entries that were merged. The subsequent scatterlist entry will contain DMA information for the scatterlist entry after the last merged entry, but the non-DMA information will be that of the first merged entry.

The ccp driver does not take this scatterlist merging into account. To address this, add a second scatterlist pointer to track the current position in the DMA mapped representation of the scatterlist. Both the DMA representation and the original representation of the scatterlist must be tracked as while most of the driver can use just the DMA representation, scatterlist_map_and_copy() must use the original representation and expects the scatterlist pointer to be accurate to the original representation.

In order to properly walk the original scatterlist, the scatterlist must be walked until the combined lengths of the entries seen is equal to the DMA length of the current entry being processed in the DMA mapped representation.

Fixes 63b945091a070 ("crypto: ccp - CCP device driver and interface support")
---
 drivers/crypto/ccp/ccp-dev.h |    1 +
 drivers/crypto/ccp/ccp-ops.c |   37 ++++++++++++++++++++++++++-----------
 2 files changed, 27 insertions(+), 11 deletions(-)
drivers/crypto/ccp/ccp-dev.h +1 -0
@@ -471,6 +471,7 @@ struct ccp_sg_workarea {
 	unsigned int sg_used;
 
 	struct scatterlist *dma_sg;
+	struct scatterlist *dma_sg_head;
 	struct device *dma_dev;
 	unsigned int dma_count;
 	enum dma_data_direction dma_dir;
drivers/crypto/ccp/ccp-ops.c +26 -11
@@ -67,7 +67,7 @@ static u32 ccp_gen_jobid(struct ccp_devi
 static void ccp_sg_free(struct ccp_sg_workarea *wa)
 {
 	if (wa->dma_count)
-		dma_unmap_sg(wa->dma_dev, wa->dma_sg, wa->nents, wa->dma_dir);
+		dma_unmap_sg(wa->dma_dev, wa->dma_sg_head, wa->nents, wa->dma_dir);
 
 	wa->dma_count = 0;
 }
@@ -96,6 +96,7 @@ static int ccp_init_sg_workarea(struct c
 		return 0;
 
 	wa->dma_sg = sg;
+	wa->dma_sg_head = sg;
 	wa->dma_dev = dev;
 	wa->dma_dir = dma_dir;
 	wa->dma_count = dma_map_sg(dev, sg, wa->nents, dma_dir);
@@ -108,14 +109,28 @@ static int ccp_init_sg_workarea(struct c
 static void ccp_update_sg_workarea(struct ccp_sg_workarea *wa, unsigned int len)
 {
 	unsigned int nbytes = min_t(u64, len, wa->bytes_left);
+	unsigned int sg_combined_len = 0;
 
 	if (!wa->sg)
 		return;
 
 	wa->sg_used += nbytes;
 	wa->bytes_left -= nbytes;
-	if (wa->sg_used == wa->sg->length) {
-		wa->sg = sg_next(wa->sg);
+	if (wa->sg_used == sg_dma_len(wa->dma_sg)) {
+		/* Advance to the next DMA scatterlist entry */
+		wa->dma_sg = sg_next(wa->dma_sg);
+
+		/* In the case that the DMA mapped scatterlist has entries
+		 * that have been merged, the non-DMA mapped scatterlist
+		 * must be advanced multiple times for each merged entry.
+		 * This ensures that the current non-DMA mapped entry
+		 * corresponds to the current DMA mapped entry.
+		 */
+		do {
+			sg_combined_len += wa->sg->length;
+			wa->sg = sg_next(wa->sg);
+		} while (wa->sg_used > sg_combined_len);
+
 		wa->sg_used = 0;
 	}
 }
@@ -304,7 +319,7 @@ static unsigned int ccp_queue_buf(struct
 	/* Update the structures and generate the count */
 	buf_count = 0;
 	while (sg_wa->bytes_left && (buf_count < dm_wa->length)) {
-		nbytes = min(sg_wa->sg->length - sg_wa->sg_used,
+		nbytes = min(sg_dma_len(sg_wa->dma_sg) - sg_wa->sg_used,
 			     dm_wa->length - buf_count);
 		nbytes = min_t(u64, sg_wa->bytes_left, nbytes);
 
@@ -336,11 +351,11 @@ static void ccp_prepare_data(struct ccp_
 	 * and destination. The resulting len values will always be <= UINT_MAX
 	 * because the dma length is an unsigned int.
 	 */
-	sg_src_len = sg_dma_len(src->sg_wa.sg) - src->sg_wa.sg_used;
+	sg_src_len = sg_dma_len(src->sg_wa.dma_sg) - src->sg_wa.sg_used;
 	sg_src_len = min_t(u64, src->sg_wa.bytes_left, sg_src_len);
 
 	if (dst) {
-		sg_dst_len = sg_dma_len(dst->sg_wa.sg) - dst->sg_wa.sg_used;
+		sg_dst_len = sg_dma_len(dst->sg_wa.dma_sg) - dst->sg_wa.sg_used;
 		sg_dst_len = min_t(u64, src->sg_wa.bytes_left, sg_dst_len);
 		op_len = min(sg_src_len, sg_dst_len);
 	} else {
@@ -370,7 +385,7 @@ static void ccp_prepare_data(struct ccp_
 		/* Enough data in the sg element, but we need to
 		 * adjust for any previously copied data
 		 */
-		op->src.u.dma.address = sg_dma_address(src->sg_wa.sg);
+		op->src.u.dma.address = sg_dma_address(src->sg_wa.dma_sg);
 		op->src.u.dma.offset = src->sg_wa.sg_used;
 		op->src.u.dma.length = op_len & ~(block_size - 1);
 
@@ -391,7 +406,7 @@ static void ccp_prepare_data(struct ccp_
 			/* Enough room in the sg element, but we need to
 			 * adjust for any previously used area
 			 */
-			op->dst.u.dma.address = sg_dma_address(dst->sg_wa.sg);
+			op->dst.u.dma.address = sg_dma_address(dst->sg_wa.dma_sg);
 			op->dst.u.dma.offset = dst->sg_wa.sg_used;
 			op->dst.u.dma.length = op->src.u.dma.length;
 		}
@@ -2034,7 +2049,7 @@ ccp_run_passthru_cmd(struct ccp_cmd_queu
 	dst.sg_wa.sg_used = 0;
 	for (i = 1; i <= src.sg_wa.dma_count; i++) {
 		if (!dst.sg_wa.sg ||
-		    (dst.sg_wa.sg->length < src.sg_wa.sg->length)) {
+		    (sg_dma_len(dst.sg_wa.sg) < sg_dma_len(src.sg_wa.sg))) {
 			ret = -EINVAL;
 			goto e_dst;
 		}
@@ -2060,8 +2075,8 @@ ccp_run_passthru_cmd(struct ccp_cmd_queu
 			goto e_dst;
 		}
 
-		dst.sg_wa.sg_used += src.sg_wa.sg->length;
-		if (dst.sg_wa.sg_used == dst.sg_wa.sg->length) {
+		dst.sg_wa.sg_used += sg_dma_len(src.sg_wa.sg);
+		if (dst.sg_wa.sg_used == sg_dma_len(dst.sg_wa.sg)) {
 			dst.sg_wa.sg = sg_next(dst.sg_wa.sg);
 			dst.sg_wa.sg_used = 0;
 		}
author maintainer
#124 lore raw

PATCH 124/228 s390/qeth: dont process empty bridge port events

In reply to Greg Kroah-Hartman

From: Julian Wiedmann <[email protected]>

[ Upstream commit 02472e28b9a45471c6d8729ff2c7422baa9be46a ]

Discard events that don't contain any entries. This shouldn't happen, but subsequent code relies on being able to use entry 0. So better be safe than accessing garbage.

Fixes b4d72c08b358 ("qeth: bridgeport support - basic control")
---
 drivers/s390/net/qeth_l2_main.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/s390/net/qeth_l2_main.c +4 -0
index 6fa07c2469150..ae310d5ced105 100644
@@ -1559,6 +1559,10 @@ static void qeth_bridge_state_change(struct qeth_card *card,
 	int extrasize;
 
 	QETH_CARD_TEXT(card, 2, "brstchng");
+	if (qports->num_entries == 0) {
+		QETH_CARD_TEXT(card, 2, "BPempty");
+		return;
+	}
 	if (qports->entry_length != sizeof(struct qeth_sbp_port_entry)) {
 		QETH_CARD_TEXT_(card, 2, "BPsz%04x", qports->entry_length);
 		return;
Signature · 1 line
2.25.1
author maintainer
#142 lore raw

PATCH 142/228 net: refactor bind_bucket fastreuse into helper

In reply to Greg Kroah-Hartman

From: Tim Froidcoeur <[email protected]>

[ Upstream commit 62ffc589abb176821662efc4525ee4ac0b9c3894 ]

Refactor the fastreuse update code in inet_csk_get_port into a small helper function that can be called from other places.

---
 include/net/inet_connection_sock.h |    4 +
 net/ipv4/inet_connection_sock.c    |   93 ++++++++++++++++++++-----------------
 2 files changed, 55 insertions(+), 42 deletions(-)
include/net/inet_connection_sock.h +4 -0
@@ -321,5 +321,9 @@ int inet_csk_compat_getsockopt(struct so
 int inet_csk_compat_setsockopt(struct sock *sk, int level, int optname,
 			       char __user *optval, unsigned int optlen);
 
+/* update the fast reuse flag when adding a socket */
+void inet_csk_update_fastreuse(struct inet_bind_bucket *tb,
+			       struct sock *sk);
+
 struct dst_entry *inet_csk_update_pmtu(struct sock *sk, u32 mtu);
 #endif /* _INET_CONNECTION_SOCK_H */
net/ipv4/inet_connection_sock.c +51 -42

108 lines not on this page · raw message

author maintainer
#125 lore raw

PATCH 125/228 wl1251: fix always return 0 error

In reply to Greg Kroah-Hartman

From: Wang Hai <[email protected]>

[ Upstream commit 20e6421344b5bc2f97b8e2db47b6994368417904 ]

wl1251_event_ps_report() should not always return 0 because wl1251_ps_set_mode() may fail. Change it to return 'ret'.

---
 drivers/net/wireless/ti/wl1251/event.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/ti/wl1251/event.c +1 -1
index f5acd24d0e2b1..988abb49771f9 100644
@@ -84,7 +84,7 @@ static int wl1251_event_ps_report(struct wl1251 *wl,
 		break;
 	}
 
-	return 0;
+	return ret;
 }
 
 static void wl1251_event_mbox_dump(struct event_mailbox *mbox)
Signature · 1 line
2.25.1
author maintainer
#126 lore raw

PATCH 126/228 tools, build: Propagate build failures from tools/build/Makefile.build

In reply to Greg Kroah-Hartman

From: Andrii Nakryiko <[email protected]>

[ Upstream commit a278f3d8191228212c553a5d4303fa603214b717 ]

The '&&' command seems to have a bad effect when $(cmd_$(1)) exits with non-zero effect: the command failure is masked (despite set -e) and all but the first command of $(dep-cmd) is executed (successfully, as they are mostly printfs), thus overall returning 0 in the end.

This means in practice that despite compilation errors, tools's build Makefile will return success. We see this very reliably with libbpf's Makefile, which doesn't get compilation error propagated properly. This in turns causes issues with selftests build, as well as bpftool and other projects that rely on building libbpf.

The fix is simple: don't use &&. Given set -e, we don't need to chain commands with &&. The shell will exit on first failure, giving desired behavior and propagating error properly.

Fixes 275e2d95591e ("tools build: Move dependency copy into function")
---
 tools/build/Build.include | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
tools/build/Build.include +2 -1
index d9048f145f97a..63bb9752612a8 100644
@@ -74,7 +74,8 @@ dep-cmd = $(if $(wildcard $(fixdep)),
 #                   dependencies in the cmd file
 if_changed_dep = $(if $(strip $(any-prereq) $(arg-check)),         \
                   @set -e;                                         \
-                  $(echo-cmd) $(cmd_$(1)) && $(dep-cmd))
+                  $(echo-cmd) $(cmd_$(1));                         \
+                  $(dep-cmd))
 
 # if_changed      - execute command if any prerequisite is newer than
 #                   target, or command line has changed
Signature · 1 line
2.25.1
author maintainer
#141 lore raw

PATCH 141/228 net/nfc/rawsock.c: add CAP_NET_RAW check.

In reply to Greg Kroah-Hartman

From: Qingyu Li <[email protected]>

[ Upstream commit 26896f01467a28651f7a536143fe5ac8449d4041 ]

When creating a raw AF_NFC socket, CAP_NET_RAW needs to be checked first.

---
 net/nfc/rawsock.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
net/nfc/rawsock.c +5 -2
@@ -344,10 +344,13 @@ static int rawsock_create(struct net *ne
 	if ((sock->type != SOCK_SEQPACKET) && (sock->type != SOCK_RAW))
 		return -ESOCKTNOSUPPORT;
 
-	if (sock->type == SOCK_RAW)
+	if (sock->type == SOCK_RAW) {
+		if (!capable(CAP_NET_RAW))
+			return -EPERM;
 		sock->ops = &rawsock_raw_ops;
-	else
+	} else {
 		sock->ops = &rawsock_ops;
+	}
 
 	sk = sk_alloc(net, PF_NFC, GFP_ATOMIC, nfc_proto->proto, kern);
 	if (!sk)
author maintainer
#146 lore raw

PATCH 146/228 ALSA: usb-audio: Creative USB X-Fi Pro SB1095 volume knob support

In reply to Greg Kroah-Hartman

From: Mirko Dietrich <[email protected]>

commit fec9008828cde0076aae595ac031bfcf49d335a4 upstream.

Adds an entry for Creative USB X-Fi to the rc_config array in mixer_quirks.c to allow use of volume knob on the device. Adds support for newer X-Fi Pro card, known as "Model No. SB1095" with USB ID "041e:3263"

---
 sound/usb/mixer_quirks.c |    1 +
 1 file changed, 1 insertion(+)
sound/usb/mixer_quirks.c +1 -0
@@ -196,6 +196,7 @@ static const struct rc_config {
 	{ USB_ID(0x041e, 0x3042), 0, 1, 1, 1,  1,  0x000d }, /* Usb X-Fi S51 */
 	{ USB_ID(0x041e, 0x30df), 0, 1, 1, 1,  1,  0x000d }, /* Usb X-Fi S51 Pro */
 	{ USB_ID(0x041e, 0x3237), 0, 1, 1, 1,  1,  0x000d }, /* Usb X-Fi S51 Pro */
+	{ USB_ID(0x041e, 0x3263), 0, 1, 1, 1,  1,  0x000d }, /* Usb X-Fi S51 Pro */
 	{ USB_ID(0x041e, 0x3048), 2, 2, 6, 6,  2,  0x6e91 }, /* Toshiba SB0500 */
 };
 
author maintainer
#162 lore raw

PATCH 162/228 ARM: 8992/1: Fix unwind_frame for clang-built kernels

In reply to Greg Kroah-Hartman

From: Nathan Huckleberry <[email protected]>

commit b4d5ec9b39f8b31d98f65bc5577b5d15d93795d7 upstream.

Since clang does not push pc and sp in function prologues, the current implementation of unwind_frame does not work. By using the previous frame's lr/fp instead of saved pc/sp we get valid unwinds on clang-built kernels.

The bounds check on next frame pointer must be changed as well since there are 8 less bytes between frames.

This fixes /proc/<pid>/stack.

---
 arch/arm/kernel/stacktrace.c |   24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)
arch/arm/kernel/stacktrace.c +24 -0
@@ -20,6 +20,19 @@
  * A simple function epilogue looks like this:
  *	ldm	sp, {fp, sp, pc}
  *
+ * When compiled with clang, pc and sp are not pushed. A simple function
+ * prologue looks like this when built with clang:
+ *
+ *	stmdb	{..., fp, lr}
+ *	add	fp, sp, #x
+ *	sub	sp, sp, #y
+ *
+ * A simple function epilogue looks like this when built with clang:
+ *
+ *	sub	sp, fp, #x
+ *	ldm	{..., fp, pc}
+ *
+ *
  * Note that with framepointer enabled, even the leaf functions have the same
  * prologue and epilogue, therefore we can ignore the LR value in this case.
  */
@@ -32,6 +45,16 @@ int notrace unwind_frame(struct stackfra
 	low = frame->sp;
 	high = ALIGN(low, THREAD_SIZE);
 
+#ifdef CONFIG_CC_IS_CLANG
+	/* check current frame pointer is within bounds */
+	if (fp < low + 4 || fp > high - 4)
+		return -EINVAL;
+
+	frame->sp = frame->fp;
+	frame->fp = *(unsigned long *)(fp);
+	frame->pc = frame->lr;
+	frame->lr = *(unsigned long *)(fp + 4);
+#else
 	/* check current frame pointer is within bounds */
 	if (fp < low + 12 || fp > high - 4)
 		return -EINVAL;
@@ -40,6 +63,7 @@ int notrace unwind_frame(struct stackfra
 	frame->fp = *(unsigned long *)(fp - 12);
 	frame->sp = *(unsigned long *)(fp - 8);
 	frame->pc = *(unsigned long *)(fp - 4);
+#endif
 
 	return 0;
 }
author maintainer
#164 lore raw

PATCH 164/228 xen/balloon: fix accounting in alloc_xenballooned_pages error path

In reply to Greg Kroah-Hartman

From: Roger Pau Monne <[email protected]>

commit 1951fa33ec259abdf3497bfee7b63e7ddbb1a394 upstream.

target_unpopulated is incremented with nr_pages at the start of the function, but the call to free_xenballooned_pages will only subtract pgno number of pages, and thus the rest need to be subtracted before returning or else accounting will be skewed.

---
 drivers/xen/balloon.c |    6 ++++++
 1 file changed, 6 insertions(+)
drivers/xen/balloon.c +6 -0
@@ -695,6 +695,12 @@ int alloc_xenballooned_pages(int nr_page
  out_undo:
 	mutex_unlock(&balloon_mutex);
 	free_xenballooned_pages(pgno, pages);
+	/*
+	 * NB: free_xenballooned_pages will only subtract pgno pages, but since
+	 * target_unpopulated is incremented with nr_pages at the start we need
+	 * to remove the remaining ones also, or accounting will be screwed.
+	 */
+	balloon_stats.target_unpopulated -= nr_pages - pgno;
 	return ret;
 }
 EXPORT_SYMBOL(alloc_xenballooned_pages);
author maintainer
#122 lore raw

PATCH 122/228 PCI: Release IVRS table in AMD ACS quirk

In reply to Greg Kroah-Hartman

From: Hanjun Guo <[email protected]>

[ Upstream commit 090688fa4e448284aaa16136372397d7d10814db ]

The acpi_get_table() should be coupled with acpi_put_table() if the mapped table is not used at runtime to release the table mapping.

In pci_quirk_amd_sb_acs(), IVRS table is just used for checking AMD IOMMU is supported, not used at runtime, so put the table after using it.

Fixes 15b100dfd1c9 ("PCI: Claim ACS support for AMD southbridge devices")
---
 drivers/pci/quirks.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/pci/quirks.c +2 -0
index 243b16ce0c8eb..da790f26d2950 100644
@@ -4307,6 +4307,8 @@ static int pci_quirk_amd_sb_acs(struct pci_dev *dev, u16 acs_flags)
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 
+	acpi_put_table(header);
+
 	/* Filter out flags not applicable to multifunction */
 	acs_flags &= (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_EC | PCI_ACS_DT);
 
Signature · 1 line
2.25.1
author maintainer
#169 lore raw

PATCH 169/228 btrfs: dont allocate anonymous block device for user invisible roots

In reply to Greg Kroah-Hartman

From: Qu Wenruo <[email protected]>

commit 851fd730a743e072badaf67caf39883e32439431 upstream.

[BUG]
When a lot of subvolumes are created, there is a user report about transaction aborted:

BTRFS: Transaction aborted (error -24)

  WARNING: CPU: 17 PID: 17041 at fs/btrfs/transaction.c:1576 create_pending_snapshot+0xbc4/0xd10 [btrfs]
  RIP: 0010:create_pending_snapshot+0xbc4/0xd10 [btrfs]
  Call Trace:
   create_pending_snapshots+0x82/0xa0 [btrfs]
   btrfs_commit_transaction+0x275/0x8c0 [btrfs]
   btrfs_mksubvol+0x4b9/0x500 [btrfs]
   btrfs_ioctl_snap_create_transid+0x174/0x180 [btrfs]
   btrfs_ioctl_snap_create_v2+0x11c/0x180 [btrfs]
   btrfs_ioctl+0x11a4/0x2da0 [btrfs]
   do_vfs_ioctl+0xa9/0x640
   ksys_ioctl+0x67/0x90
   __x64_sys_ioctl+0x1a/0x20
   do_syscall_64+0x5a/0x110
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  ---[ end trace 33f2f83f3d5250e9 ]---
  BTRFS: error (device sda1) in create_pending_snapshot:1576: errno=-24 unknown
  BTRFS info (device sda1): forced readonly
  BTRFS warning (device sda1): Skipping commit of aborted transaction.
  BTRFS: error (device sda1) in cleanup_transaction:1831: errno=-24 unknown

[CAUSE]
The error is EMFILE (Too many files open) and comes from the anonymous block device allocation. The ids are in a shared pool of size 1<<20.

The ids are assigned to live subvolumes, ie. the root structure exists in memory (eg. after creation or after the root appears in some path). The pool could be exhausted if the numbers are not reclaimed fast enough, after subvolume deletion or if other system component uses the anon block devices.

[WORKAROUND]
Since it's not possible to completely solve the problem, we can only minimize the time the id is allocated to a subvolume root.

Firstly, we can reduce the use of anon_dev by trees that are not subvolume roots, like data reloc tree.

This patch will do extra check on root objectid, to skip roots that don't need anon_dev. Currently it's only data reloc tree and orphan roots.

---
 fs/btrfs/disk-io.c |   13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)
fs/btrfs/disk-io.c +10 -3
@@ -1509,9 +1509,16 @@ int btrfs_init_fs_root(struct btrfs_root
 	spin_lock_init(&root->ino_cache_lock);
 	init_waitqueue_head(&root->ino_cache_wait);
 
-	ret = get_anon_bdev(&root->anon_dev);
-	if (ret)
-		goto fail;
+	/*
+	 * Don't assign anonymous block device to roots that are not exposed to
+	 * userspace, the id pool is limited to 1M
+	 */
+	if (is_fstree(root->root_key.objectid) &&
+	    btrfs_root_refs(&root->root_item) > 0) {
+		ret = get_anon_bdev(&root->anon_dev);
+		if (ret)
+			goto fail;
+	}
 
 	mutex_lock(&root->objectid_mutex);
 	ret = btrfs_find_highest_objectid(root,
author maintainer
#172 lore raw

PATCH 172/228 dt-bindings: iio: io-channel-mux: Fix compatible string in example code

In reply to Greg Kroah-Hartman

From: Christian Eggers <[email protected]>

commit add48ba425192c6e04ce70549129cacd01e2a09e upstream.

The correct compatible string is "gpio-mux" (see bindings/mux/gpio-mux.txt).

---
 Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt +1 -1
@@ -21,7 +21,7 @@ controller state. The mux controller sta
 
 Example:
 	mux: mux-controller {
-		compatible = "mux-gpio";
+		compatible = "gpio-mux";
 		#mux-control-cells = <0>;
 
 		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
author maintainer
#181 lore raw

PATCH 181/228 mac80211: fix misplaced while instead of if

In reply to Greg Kroah-Hartman

From: Johannes Berg <[email protected]>

commit 5981fe5b0529ba25d95f37d7faa434183ad618c5 upstream.

This never was intended to be a 'while' loop, it should've just been an 'if' instead of 'while'. Fix this.

I noticed this while applying another patch from Ben that intended to fix a busy loop at this spot.

---
 net/mac80211/sta_info.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/mac80211/sta_info.c +1 -1
@@ -952,7 +952,7 @@ static void __sta_info_destroy_part2(str
 	might_sleep();
 	lockdep_assert_held(&local->sta_mtx);
 
-	while (sta->sta_state == IEEE80211_STA_AUTHORIZED) {
+	if (sta->sta_state == IEEE80211_STA_AUTHORIZED) {
 		ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
 		WARN_ON_ONCE(ret);
 	}
author maintainer
#183 lore raw

PATCH 183/228 ext2: fix missing percpu_counter_inc

In reply to Greg Kroah-Hartman

From: Mikulas Patocka <[email protected]>

commit bc2fbaa4d3808aef82dd1064a8e61c16549fe956 upstream.

sbi->s_freeinodes_counter is only decreased by the ext2 code, it is never increased. This patch fixes it.

Note that sbi->s_freeinodes_counter is only used in the algorithm that tries to find the group for new allocations, so this bug is not easily visible (the only visibility is that the group finding algorithm selects inoptinal result).

---
 fs/ext2/ialloc.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
fs/ext2/ialloc.c +2 -1
@@ -80,6 +80,7 @@ static void ext2_release_inode(struct su
 	if (dir)
 		le16_add_cpu(&desc->bg_used_dirs_count, -1);
 	spin_unlock(sb_bgl_lock(EXT2_SB(sb), group));
+	percpu_counter_inc(&EXT2_SB(sb)->s_freeinodes_counter);
 	if (dir)
 		percpu_counter_dec(&EXT2_SB(sb)->s_dirs_counter);
 	mark_buffer_dirty(bh);
@@ -531,7 +532,7 @@ got:
 		goto fail;
 	}
 
-	percpu_counter_add(&sbi->s_freeinodes_counter, -1);
+	percpu_counter_dec(&sbi->s_freeinodes_counter);
 	if (S_ISDIR(mode))
 		percpu_counter_inc(&sbi->s_dirs_counter);
 
author maintainer
#174 lore raw

PATCH 174/228 xtensa: fix xtensa_pmu_setup prototype

In reply to Greg Kroah-Hartman

From: Max Filippov <[email protected]>

commit 6d65d3769d1910379e1cfa61ebf387efc6bfb22c upstream.

Fix the following build error in configurations with CONFIG_XTENSA_VARIANT_HAVE_PERF_EVENTS=y:

arch/xtensa/kernel/perf_event.c:420:29: error: passing argument 3 of ‘cpuhp_setup_state’ from incompatible pointer type

Fixes 25a77b55e74c ("xtensa/perf: Convert the hotplug notifier to state machine callbacks")
---
 arch/xtensa/kernel/perf_event.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/xtensa/kernel/perf_event.c +1 -1
@@ -404,7 +404,7 @@ static struct pmu xtensa_pmu = {
 	.read = xtensa_pmu_read,
 };
 
-static int xtensa_pmu_setup(int cpu)
+static int xtensa_pmu_setup(unsigned int cpu)
 {
 	unsigned i;
 
author maintainer
#154 lore raw

PATCH 154/228 fs/minix: dont allow getting deleted inodes

In reply to Greg Kroah-Hartman

From: Eric Biggers <[email protected]>

commit facb03dddec04e4aac1bb2139accdceb04deb1f3 upstream.

If an inode has no links, we need to mark it bad rather than allowing it to be accessed. This avoids WARNINGs in inc_nlink() and drop_nlink() when doing directory operations on a fuzzed filesystem.

---
 fs/minix/inode.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)
fs/minix/inode.c +14 -0
@@ -471,6 +471,13 @@ static struct inode *V1_minix_iget(struc
 		iget_failed(inode);
 		return ERR_PTR(-EIO);
 	}
+	if (raw_inode->i_nlinks == 0) {
+		printk("MINIX-fs: deleted inode referenced: %lu\n",
+		       inode->i_ino);
+		brelse(bh);
+		iget_failed(inode);
+		return ERR_PTR(-ESTALE);
+	}
 	inode->i_mode = raw_inode->i_mode;
 	i_uid_write(inode, raw_inode->i_uid);
 	i_gid_write(inode, raw_inode->i_gid);
@@ -504,6 +511,13 @@ static struct inode *V2_minix_iget(struc
 		iget_failed(inode);
 		return ERR_PTR(-EIO);
 	}
+	if (raw_inode->i_nlinks == 0) {
+		printk("MINIX-fs: deleted inode referenced: %lu\n",
+		       inode->i_ino);
+		brelse(bh);
+		iget_failed(inode);
+		return ERR_PTR(-ESTALE);
+	}
 	inode->i_mode = raw_inode->i_mode;
 	i_uid_write(inode, raw_inode->i_uid);
 	i_gid_write(inode, raw_inode->i_gid);
author maintainer
#156 lore raw

PATCH 156/228 ALSA: usb-audio: work around streaming quirk for MacroSilicon MS2109

In reply to Greg Kroah-Hartman

From: Hector Martin <[email protected]>

commit 1b7ecc241a67ad6b584e071bd791a54e0cd5f097 upstream.

Further investigation of the L-R swap problem on the MS2109 reveals that the problem isn't that the channels are swapped, but rather that they are swapped and also out of phase by one sample. In other words, the issue is actually that the very first frame that comes from the hardware is a half-frame containing only the right channel, and after that everything becomes offset.

So introduce a new quirk field to drop the very first 2 bytes that come in after the format is configured and a capture stream starts. This puts the channels in phase and in the correct order.

---
 sound/usb/card.h   |    1 +
 sound/usb/pcm.c    |    6 ++++++
 sound/usb/quirks.c |    3 +++
 sound/usb/stream.c |    1 +
 4 files changed, 11 insertions(+)
sound/usb/card.h +1 -0
@@ -126,6 +126,7 @@ struct snd_usb_substream {
 	unsigned int tx_length_quirk:1;	/* add length specifier to transfers */
 	unsigned int fmt_type;		/* USB audio format type (1-3) */
 	unsigned int pkt_offset_adj;	/* Bytes to drop from beginning of packets (for non-compliant devices) */
+	unsigned int stream_offset_adj;	/* Bytes to drop from beginning of stream (for non-compliant devices) */
 
 	unsigned int running: 1;	/* running status */
 
sound/usb/pcm.c +6 -0
@@ -1313,6 +1313,12 @@ static void retire_capture_urb(struct sn
 			// continue;
 		}
 		bytes = urb->iso_frame_desc[i].actual_length;
+		if (subs->stream_offset_adj > 0) {
+			unsigned int adj = min(subs->stream_offset_adj, bytes);
+			cp += adj;
+			bytes -= adj;
+			subs->stream_offset_adj -= adj;
+		}
 		frames = bytes / stride;
 		if (!subs->txfr_quirk)
 			bytes = frames * stride;
sound/usb/quirks.c +3 -0
@@ -1120,6 +1120,9 @@ void snd_usb_set_format_quirk(struct snd
 	case USB_ID(0x041e, 0x3f19): /* E-Mu 0204 USB */
 		set_format_emu_quirk(subs, fmt);
 		break;
+	case USB_ID(0x534d, 0x2109): /* MacroSilicon MS2109 */
+		subs->stream_offset_adj = 2;
+		break;
 	}
 }
 
sound/usb/stream.c +1 -0
@@ -95,6 +95,7 @@ static void snd_usb_init_substream(struc
 	subs->tx_length_quirk = as->chip->tx_length_quirk;
 	subs->speed = snd_usb_get_speed(subs->dev);
 	subs->pkt_offset_adj = 0;
+	subs->stream_offset_adj = 0;
 
 	snd_usb_set_pcm_ops(as->pcm, stream);
 
author maintainer
#158 lore raw

PATCH 158/228 spi: spidev: Align buffers for DMA

In reply to Greg Kroah-Hartman

From: Christian Eggers <[email protected]>

commit aa9e862d7d5bcecd4dca9f39e8b684b93dd84ee7 upstream.

Simply copying all xfers from userspace into one bounce buffer causes alignment problems if the SPI controller uses DMA.

Ensure that all transfer data blocks within the rx and tx bounce buffers are aligned for DMA (according to ARCH_KMALLOC_MINALIGN).

Alignment may increase the usage of the bounce buffers. In some cases, the buffers may need to be increased using the "bufsiz" module parameter.

---
 drivers/spi/spidev.c |   21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)
drivers/spi/spidev.c +13 -8
@@ -232,6 +232,11 @@ static int spidev_message(struct spidev_
 	for (n = n_xfers, k_tmp = k_xfers, u_tmp = u_xfers;
 			n;
 			n--, k_tmp++, u_tmp++) {
+		/* Ensure that also following allocations from rx_buf/tx_buf will meet
+		 * DMA alignment requirements.
+		 */
+		unsigned int len_aligned = ALIGN(u_tmp->len, ARCH_KMALLOC_MINALIGN);
+
 		k_tmp->len = u_tmp->len;
 
 		total += k_tmp->len;
@@ -247,17 +252,17 @@ static int spidev_message(struct spidev_
 
 		if (u_tmp->rx_buf) {
 			/* this transfer needs space in RX bounce buffer */
-			rx_total += k_tmp->len;
+			rx_total += len_aligned;
 			if (rx_total > bufsiz) {
 				status = -EMSGSIZE;
 				goto done;
 			}
 			k_tmp->rx_buf = rx_buf;
-			rx_buf += k_tmp->len;
+			rx_buf += len_aligned;
 		}
 		if (u_tmp->tx_buf) {
 			/* this transfer needs space in TX bounce buffer */
-			tx_total += k_tmp->len;
+			tx_total += len_aligned;
 			if (tx_total > bufsiz) {
 				status = -EMSGSIZE;
 				goto done;
@@ -267,7 +272,7 @@ static int spidev_message(struct spidev_
 						(uintptr_t) u_tmp->tx_buf,
 					u_tmp->len))
 				goto done;
-			tx_buf += k_tmp->len;
+			tx_buf += len_aligned;
 		}
 
 		k_tmp->cs_change = !!u_tmp->cs_change;
@@ -297,16 +302,16 @@ static int spidev_message(struct spidev_
 		goto done;
 
 	/* copy any rx data out of bounce buffer */
-	rx_buf = spidev->rx_buffer;
-	for (n = n_xfers, u_tmp = u_xfers; n; n--, u_tmp++) {
+	for (n = n_xfers, k_tmp = k_xfers, u_tmp = u_xfers;
+			n;
+			n--, k_tmp++, u_tmp++) {
 		if (u_tmp->rx_buf) {
 			if (copy_to_user((u8 __user *)
-					(uintptr_t) u_tmp->rx_buf, rx_buf,
+					(uintptr_t) u_tmp->rx_buf, k_tmp->rx_buf,
 					u_tmp->len)) {
 				status = -EFAULT;
 				goto done;
 			}
-			rx_buf += u_tmp->len;
 		}
 	}
 	status = total;
author maintainer
#160 lore raw

PATCH 160/228 parisc: Implement __smp_store_release and __smp_load_acquire barriers

In reply to Greg Kroah-Hartman

From: John David Anglin <[email protected]>

commit e96ebd589debd9a6a793608c4ec7019c38785dea upstream.

This patch implements the __smp_store_release and __smp_load_acquire barriers using ordered stores and loads. This avoids the sync instruction present in the generic implementation.

---
 arch/parisc/include/asm/barrier.h |   61 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)
arch/parisc/include/asm/barrier.h +61 -0
@@ -26,6 +26,67 @@
 #define __smp_rmb()	mb()
 #define __smp_wmb()	mb()
 
+#define __smp_store_release(p, v)					\
+do {									\
+	typeof(p) __p = (p);						\
+        union { typeof(*p) __val; char __c[1]; } __u =			\
+                { .__val = (__force typeof(*p)) (v) };			\
+	compiletime_assert_atomic_type(*p);				\
+	switch (sizeof(*p)) {						\
+	case 1:								\
+		asm volatile("stb,ma %0,0(%1)"				\
+				: : "r"(*(__u8 *)__u.__c), "r"(__p)	\
+				: "memory");				\
+		break;							\
+	case 2:								\
+		asm volatile("sth,ma %0,0(%1)"				\
+				: : "r"(*(__u16 *)__u.__c), "r"(__p)	\
+				: "memory");				\
+		break;							\
+	case 4:								\
+		asm volatile("stw,ma %0,0(%1)"				\
+				: : "r"(*(__u32 *)__u.__c), "r"(__p)	\
+				: "memory");				\
+		break;							\
+	case 8:								\
+		if (IS_ENABLED(CONFIG_64BIT))				\
+			asm volatile("std,ma %0,0(%1)"			\
+				: : "r"(*(__u64 *)__u.__c), "r"(__p)	\
+				: "memory");				\
+		break;							\
+	}								\
+} while (0)
+
+#define __smp_load_acquire(p)						\
+({									\
+	union { typeof(*p) __val; char __c[1]; } __u;			\
+	typeof(p) __p = (p);						\
+	compiletime_assert_atomic_type(*p);				\
+	switch (sizeof(*p)) {						\
+	case 1:								\
+		asm volatile("ldb,ma 0(%1),%0"				\
+				: "=r"(*(__u8 *)__u.__c) : "r"(__p)	\
+				: "memory");				\
+		break;							\
+	case 2:								\
+		asm volatile("ldh,ma 0(%1),%0"				\
+				: "=r"(*(__u16 *)__u.__c) : "r"(__p)	\
+				: "memory");				\
+		break;							\
+	case 4:								\
+		asm volatile("ldw,ma 0(%1),%0"				\
+				: "=r"(*(__u32 *)__u.__c) : "r"(__p)	\
+				: "memory");				\
+		break;							\
+	case 8:								\
+		if (IS_ENABLED(CONFIG_64BIT))				\
+			asm volatile("ldd,ma 0(%1),%0"			\
+				: "=r"(*(__u64 *)__u.__c) : "r"(__p)	\
+				: "memory");				\
+		break;							\
+	}								\
+	__u.__val;							\
+})
 #include <asm-generic/barrier.h>
 
 #endif /* !__ASSEMBLY__ */
author maintainer
#185 lore raw

PATCH 185/228 ftrace: Setup correct FTRACE_FL_REGS flags for module

In reply to Greg Kroah-Hartman

From: Chengming Zhou <[email protected]>

commit 8a224ffb3f52b0027f6b7279854c71a31c48fc97 upstream.

When module loaded and enabled, we will use __ftrace_replace_code for module if any ftrace_ops referenced it found. But we will get wrong ftrace_addr for module rec in ftrace_get_addr_new, because rec->flags has not been setup correctly. It can cause the callback function of a ftrace_ops has FTRACE_OPS_FL_SAVE_REGS to be called with pt_regs set to NULL.
So setup correct FTRACE_FL_REGS flags for rec when we call referenced_filters to find ftrace_ops references it.

Fixes 8c4f3c3fa9681 ("ftrace: Check module functions being traced on reload")
---
 kernel/trace/ftrace.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
kernel/trace/ftrace.c +7 -4
@@ -5721,8 +5721,11 @@ static int referenced_filters(struct dyn
 	int cnt = 0;
 
 	for (ops = ftrace_ops_list; ops != &ftrace_list_end; ops = ops->next) {
-		if (ops_references_rec(ops, rec))
-		    cnt++;
+		if (ops_references_rec(ops, rec)) {
+			cnt++;
+			if (ops->flags & FTRACE_OPS_FL_SAVE_REGS)
+				rec->flags |= FTRACE_FL_REGS;
+		}
 	}
 
 	return cnt;
@@ -5871,8 +5874,8 @@ void ftrace_module_enable(struct module
 		if (ftrace_start_up)
 			cnt += referenced_filters(rec);
 
-		/* This clears FTRACE_FL_DISABLED */
-		rec->flags = cnt;
+		rec->flags &= ~FTRACE_FL_DISABLED;
+		rec->flags += cnt;
 
 		if (ftrace_start_up && cnt) {
 			int failed = __ftrace_replace_code(rec, 1);
author maintainer
#151 lore raw

PATCH 151/228 crypto: cpt - dont sleep of CRYPTO_TFM_REQ_MAY_SLEEP was not specified

In reply to Greg Kroah-Hartman

From: Mikulas Patocka <[email protected]>

commit 9e27c99104707f083dccd3b4d79762859b5a0614 upstream.

There is this call chain:
cvm_encrypt -> cvm_enc_dec -> cptvf_do_request -> process_request -> kzalloc where we call sleeping allocator function even if CRYPTO_TFM_REQ_MAY_SLEEP was not specified.

Cc [email protected] # v4.11+
Fixes c694b233295b ("crypto: cavium - Add the Virtual Function driver for CPT")
---
 drivers/crypto/cavium/cpt/cptvf_algs.c       |    1 +
 drivers/crypto/cavium/cpt/cptvf_reqmanager.c |   12 ++++++------
 drivers/crypto/cavium/cpt/request_manager.h  |    2 ++
 3 files changed, 9 insertions(+), 6 deletions(-)
drivers/crypto/cavium/cpt/cptvf_algs.c +1 -0
@@ -205,6 +205,7 @@ static inline int cvm_enc_dec(struct abl
 	int status;
 
 	memset(req_info, 0, sizeof(struct cpt_request_info));
+	req_info->may_sleep = (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) != 0;
 	memset(fctx, 0, sizeof(struct fc_context));
 	create_input_list(req, enc, enc_iv_len);
 	create_output_list(req, enc_iv_len);
drivers/crypto/cavium/cpt/cptvf_reqmanager.c +6 -6
@@ -136,7 +136,7 @@ static inline int setup_sgio_list(struct
 
 	/* Setup gather (input) components */
 	g_sz_bytes = ((req->incnt + 3) / 4) * sizeof(struct sglist_component);
-	info->gather_components = kzalloc(g_sz_bytes, GFP_KERNEL);
+	info->gather_components = kzalloc(g_sz_bytes, req->may_sleep ? GFP_KERNEL : GFP_ATOMIC);
 	if (!info->gather_components) {
 		ret = -ENOMEM;
 		goto  scatter_gather_clean;
@@ -153,7 +153,7 @@ static inline int setup_sgio_list(struct
 
 	/* Setup scatter (output) components */
 	s_sz_bytes = ((req->outcnt + 3) / 4) * sizeof(struct sglist_component);
-	info->scatter_components = kzalloc(s_sz_bytes, GFP_KERNEL);
+	info->scatter_components = kzalloc(s_sz_bytes, req->may_sleep ? GFP_KERNEL : GFP_ATOMIC);
 	if (!info->scatter_components) {
 		ret = -ENOMEM;
 		goto  scatter_gather_clean;
@@ -170,7 +170,7 @@ static inline int setup_sgio_list(struct
 
 	/* Create and initialize DPTR */
 	info->dlen = g_sz_bytes + s_sz_bytes + SG_LIST_HDR_SIZE;
-	info->in_buffer = kzalloc(info->dlen, GFP_KERNEL);
+	info->in_buffer = kzalloc(info->dlen, req->may_sleep ? GFP_KERNEL : GFP_ATOMIC);
 	if (!info->in_buffer) {
 		ret = -ENOMEM;
 		goto  scatter_gather_clean;
@@ -198,7 +198,7 @@ static inline int setup_sgio_list(struct
 	}
 
 	/* Create and initialize RPTR */
-	info->out_buffer = kzalloc(COMPLETION_CODE_SIZE, GFP_KERNEL);
+	info->out_buffer = kzalloc(COMPLETION_CODE_SIZE, req->may_sleep ? GFP_KERNEL : GFP_ATOMIC);
 	if (!info->out_buffer) {
 		ret = -ENOMEM;
 		goto scatter_gather_clean;
@@ -434,7 +434,7 @@ int process_request(struct cpt_vf *cptvf
 	struct cpt_vq_command vq_cmd;
 	union cpt_inst_s cptinst;
 
-	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	info = kzalloc(sizeof(*info), req->may_sleep ? GFP_KERNEL : GFP_ATOMIC);
 	if (unlikely(!info)) {
 		dev_err(&pdev->dev, "Unable to allocate memory for info_buffer\n");
 		return -ENOMEM;
@@ -456,7 +456,7 @@ int process_request(struct cpt_vf *cptvf
 	 * Get buffer for union cpt_res_s response
 	 * structure and its physical address
 	 */
-	info->completion_addr = kzalloc(sizeof(union cpt_res_s), GFP_KERNEL);
+	info->completion_addr = kzalloc(sizeof(union cpt_res_s), req->may_sleep ? GFP_KERNEL : GFP_ATOMIC);
 	if (unlikely(!info->completion_addr)) {
 		dev_err(&pdev->dev, "Unable to allocate memory for completion_addr\n");
 		ret = -ENOMEM;
drivers/crypto/cavium/cpt/request_manager.h +2 -0
@@ -65,6 +65,8 @@ struct cpt_request_info {
 	union ctrl_info ctrl; /* User control information */
 	struct cptvf_request req; /* Request Information (Core specific) */
 
+	bool may_sleep;
+
 	struct buf_ptr in[MAX_BUF_CNT];
 	struct buf_ptr out[MAX_BUF_CNT];
 
author maintainer
#203 lore raw

PATCH 202/228 iommu/omap: Check for failure of a call to omap_iommu_dump_ctx

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit dee9d154f40c58d02f69acdaa5cfd1eae6ebc28b ]

It is possible for the call to omap_iommu_dump_ctx to return a negative error number, so check for the failure and return the error number rather than pass the negative value to simple_read_from_buffer.

Fixes 14e0e6796a0d ("OMAP: iommu: add initial debugfs support")

Addresses-Coverity: ("Improper use of negative value")

---
 drivers/iommu/omap-iommu-debug.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/iommu/omap-iommu-debug.c +3 -0
index 505548aafeff2..cec33e90e3998 100644
@@ -101,8 +101,11 @@ static ssize_t debug_read_regs(struct file *file, char __user *userbuf,
 	mutex_lock(&iommu_debug_lock);
 
 	bytes = omap_iommu_dump_ctx(obj, p, count);
+	if (bytes < 0)
+		goto err;
 	bytes = simple_read_from_buffer(userbuf, count, ppos, buf, bytes);
 
+err:
 	mutex_unlock(&iommu_debug_lock);
 	kfree(buf);
 
Signature · 1 line
2.25.1
author maintainer
#195 lore raw

PATCH 195/228 mfd: arizona: Ensure 32k clock is put on driver unbind and error

In reply to Greg Kroah-Hartman

From: Charles Keepax <[email protected]>

[ Upstream commit ddff6c45b21d0437ce0c85f8ac35d7b5480513d7 ]

Whilst it doesn't matter if the internal 32k clock register settings are cleaned up on exit, as the part will be turned off losing any settings, hence the driver hasn't historially bothered. The external clock should however be cleaned up, as it could cause clocks to be left on, and will at best generate a warning on unbind.

Add clean up on both the probe error path and unbind for the 32k clock.

Fixes cdd8da8cc66b ("mfd: arizona: Add gating of external MCLKn clocks")
---
 drivers/mfd/arizona-core.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
drivers/mfd/arizona-core.c +18 -0
index ad8a5296c50ba..9aa33141e7f14 100644
@@ -1528,6 +1528,15 @@ int arizona_dev_init(struct arizona *arizona)
 	arizona_irq_exit(arizona);
 err_pm:
 	pm_runtime_disable(arizona->dev);
+
+	switch (arizona->pdata.clk32k_src) {
+	case ARIZONA_32KZ_MCLK1:
+	case ARIZONA_32KZ_MCLK2:
+		arizona_clk32k_disable(arizona);
+		break;
+	default:
+		break;
+	}
 err_reset:
 	arizona_enable_reset(arizona);
 	regulator_disable(arizona->dcvdd);
@@ -1550,6 +1559,15 @@ int arizona_dev_exit(struct arizona *arizona)
 	regulator_disable(arizona->dcvdd);
 	regulator_put(arizona->dcvdd);
 
+	switch (arizona->pdata.clk32k_src) {
+	case ARIZONA_32KZ_MCLK1:
+	case ARIZONA_32KZ_MCLK2:
+		arizona_clk32k_disable(arizona);
+		break;
+	default:
+		break;
+	}
+
 	mfd_remove_devices(arizona->dev);
 	arizona_free_irq(arizona, ARIZONA_IRQ_UNDERCLOCKED, arizona);
 	arizona_free_irq(arizona, ARIZONA_IRQ_OVERCLOCKED, arizona);
Signature · 1 line
2.25.1
author maintainer
#196 lore raw

PATCH 196/228 RDMA/ipoib: Return void from ipoib_ib_dev_stop()

In reply to Greg Kroah-Hartman

From: Kamal Heib <[email protected]>

[ Upstream commit 95a5631f6c9f3045f26245e6045244652204dfdb ]

The return value from ipoib_ib_dev_stop() is always 0 - change it to be void.

---
 drivers/infiniband/ulp/ipoib/ipoib.h    | 2 +-
 drivers/infiniband/ulp/ipoib/ipoib_ib.c | 4 +---
 2 files changed, 2 insertions(+), 4 deletions(-)
drivers/infiniband/ulp/ipoib/ipoib.h +1 -1
index 4a5c7a07a6315..268e23ba4a636 100644
@@ -509,7 +509,7 @@ void ipoib_ib_dev_cleanup(struct net_device *dev);
 
 int ipoib_ib_dev_open_default(struct net_device *dev);
 int ipoib_ib_dev_open(struct net_device *dev);
-int ipoib_ib_dev_stop(struct net_device *dev);
+void ipoib_ib_dev_stop(struct net_device *dev);
 void ipoib_ib_dev_up(struct net_device *dev);
 void ipoib_ib_dev_down(struct net_device *dev);
 int ipoib_ib_dev_stop_default(struct net_device *dev);
drivers/infiniband/ulp/ipoib/ipoib_ib.c +1 -3
index d77e8e2ae05f2..8e1f48fe6f2e7 100644
@@ -809,7 +809,7 @@ int ipoib_ib_dev_stop_default(struct net_device *dev)
 	return 0;
 }
 
-int ipoib_ib_dev_stop(struct net_device *dev)
+void ipoib_ib_dev_stop(struct net_device *dev)
 {
 	struct ipoib_dev_priv *priv = ipoib_priv(dev);
 
@@ -817,8 +817,6 @@ int ipoib_ib_dev_stop(struct net_device *dev)
 
 	clear_bit(IPOIB_FLAG_INITIALIZED, &priv->flags);
 	ipoib_flush_ah(dev);
-
-	return 0;
 }
 
 void ipoib_ib_tx_timer_func(unsigned long ctx)
Signature · 1 line
2.25.1
author maintainer
#209 lore raw

PATCH 208/228 i2c: rcar: avoid race when unregistering slave

In reply to Greg Kroah-Hartman

From: Wolfram Sang <[email protected]>

[ Upstream commit c7c9e914f9a0478fba4dc6f227cfd69cf84a4063 ]

Due to the lockless design of the driver, it is theoretically possible to access a NULL pointer, if a slave interrupt was running while we were unregistering the slave. To make this rock solid, disable the interrupt for a short time while we are clearing the interrupt_enable register. This patch is purely based on code inspection. The OOPS is super-hard to trigger because clearing SAR (the address) makes interrupts even more unlikely to happen as well. While here, reinit SCR to SDBS because this bit should always be set according to documentation. There is no effect, though, because the interface is disabled.

Fixes 7b814d852af6 ("i2c: rcar: avoid race when unregistering slave client")
---
 drivers/i2c/busses/i2c-rcar.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
drivers/i2c/busses/i2c-rcar.c +5 -3
index 07305304712e1..ed0f068109785 100644
@@ -815,12 +815,14 @@ static int rcar_unreg_slave(struct i2c_client *slave)
 
 	WARN_ON(!priv->slave);
 
-	/* disable irqs and ensure none is running before clearing ptr */
+	/* ensure no irq is running before clearing ptr */
+	disable_irq(priv->irq);
 	rcar_i2c_write(priv, ICSIER, 0);
-	rcar_i2c_write(priv, ICSCR, 0);
+	rcar_i2c_write(priv, ICSSR, 0);
+	enable_irq(priv->irq);
+	rcar_i2c_write(priv, ICSCR, SDBS);
 	rcar_i2c_write(priv, ICSAR, 0); /* Gen2: must be 0 if not using slave */
 
-	synchronize_irq(priv->irq);
 	priv->slave = NULL;
 
 	pm_runtime_put(rcar_i2c_priv_to_dev(priv));
Signature · 1 line
2.25.1
author maintainer
#198 lore raw

PATCH 197/228 USB: serial: ftdi_sio: make process-packet buffer unsigned

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

[ Upstream commit ab4cc4ef6724ea588e835fc1e764c4b4407a70b7 ]

Use an unsigned type for the process-packet buffer argument and give it a more apt name.

---
 drivers/usb/serial/ftdi_sio.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)
drivers/usb/serial/ftdi_sio.c +11 -11
index a962065227c48..4959fcac5e030 100644
@@ -2042,12 +2042,12 @@ static int ftdi_prepare_write_buffer(struct usb_serial_port *port,
 #define FTDI_RS_ERR_MASK (FTDI_RS_BI | FTDI_RS_PE | FTDI_RS_FE | FTDI_RS_OE)
 
 static int ftdi_process_packet(struct usb_serial_port *port,
-		struct ftdi_private *priv, char *packet, int len)
+		struct ftdi_private *priv, unsigned char *buf, int len)
 {
+	unsigned char status;
+	unsigned char *ch;
 	int i;
-	char status;
 	char flag;
-	char *ch;
 
 	if (len < 2) {
 		dev_dbg(&port->dev, "malformed packet\n");
@@ -2057,7 +2057,7 @@ static int ftdi_process_packet(struct usb_serial_port *port,
 	/* Compare new line status to the old one, signal if different/
 	   N.B. packet may be processed more than once, but differences
 	   are only processed once.  */
-	status = packet[0] & FTDI_STATUS_B0_MASK;
+	status = buf[0] & FTDI_STATUS_B0_MASK;
 	if (status != priv->prev_status) {
 		char diff_status = status ^ priv->prev_status;
 
@@ -2083,7 +2083,7 @@ static int ftdi_process_packet(struct usb_serial_port *port,
 	}
 
 	/* save if the transmitter is empty or not */
-	if (packet[1] & FTDI_RS_TEMT)
+	if (buf[1] & FTDI_RS_TEMT)
 		priv->transmit_empty = 1;
 	else
 		priv->transmit_empty = 0;
@@ -2097,29 +2097,29 @@ static int ftdi_process_packet(struct usb_serial_port *port,
 	 * data payload to avoid over-reporting.
 	 */
 	flag = TTY_NORMAL;
-	if (packet[1] & FTDI_RS_ERR_MASK) {
+	if (buf[1] & FTDI_RS_ERR_MASK) {
 		/* Break takes precedence over parity, which takes precedence
 		 * over framing errors */
-		if (packet[1] & FTDI_RS_BI) {
+		if (buf[1] & FTDI_RS_BI) {
 			flag = TTY_BREAK;
 			port->icount.brk++;
 			usb_serial_handle_break(port);
-		} else if (packet[1] & FTDI_RS_PE) {
+		} else if (buf[1] & FTDI_RS_PE) {
 			flag = TTY_PARITY;
 			port->icount.parity++;
-		} else if (packet[1] & FTDI_RS_FE) {
+		} else if (buf[1] & FTDI_RS_FE) {
 			flag = TTY_FRAME;
 			port->icount.frame++;
 		}
 		/* Overrun is special, not associated with a char */
-		if (packet[1] & FTDI_RS_OE) {
+		if (buf[1] & FTDI_RS_OE) {
 			port->icount.overrun++;
 			tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
 		}
 	}
 
 	port->icount.rx += len;
-	ch = packet + 2;
+	ch = buf + 2;
 
 	if (port->port.console && port->sysrq) {
 		for (i = 0; i < len; i++, ch++) {
Signature · 1 line
2.25.1
author maintainer
#216 lore raw

PATCH 215/228 test_kmod: avoid potential double free in trigger_config_run_type()

In reply to Greg Kroah-Hartman

From: Tiezhu Yang <[email protected]>

[ Upstream commit 0776d1231bec0c7ab43baf440a3f5ef5f49dd795 ]

Reset the member "test_fs" of the test configuration after a call of the function "kfree_const" to a null pointer so that a double memory release will not be performed.

Fixes d9c6a72d6fa2 ("kmod: add test driver to stress test the module loader")
Cc Alexei Starovoitov <[email protected]>
Cc Al Viro <[email protected]>
Cc Christian Brauner <[email protected]>
Cc Chuck Lever <[email protected]>
Cc David Howells <[email protected]>
Cc David S. Miller <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc Jakub Kicinski <[email protected]>
Cc James Morris <[email protected]>
Cc Jarkko Sakkinen <[email protected]>
Cc J. Bruce Fields <[email protected]>
Cc Jens Axboe <[email protected]>
Cc Josh Triplett <[email protected]>
Cc Kees Cook <[email protected]>
Cc Lars Ellenberg <[email protected]>
Cc Nikolay Aleksandrov <[email protected]>
Cc Philipp Reisner <[email protected]>
Cc Roopa Prabhu <[email protected]>
Cc "Serge E. Hallyn" <[email protected]>
Cc Sergei Trofimovich <[email protected]>
Cc Sergey Kvachonok <[email protected]>
Cc Shuah Khan <[email protected]>
Cc Tony Vroon <[email protected]>
Cc Christoph Hellwig <[email protected]>
---
 lib/test_kmod.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
lib/test_kmod.c +1 -1
index cf619795a1822..c0ce0156d54bb 100644
@@ -747,7 +747,7 @@ static int trigger_config_run_type(struct kmod_test_device *test_dev,
 		break;
 	case TEST_KMOD_FS_TYPE:
 		kfree_const(config->test_fs);
-		config->test_driver = NULL;
+		config->test_fs = NULL;
 		copied = config_copy_test_fs(config, test_str,
 					     strlen(test_str));
 		break;
Signature · 1 line
2.25.1
author maintainer
#193 lore raw

PATCH 193/228 perf intel-pt: Fix FUP packet state

In reply to Greg Kroah-Hartman

From: Adrian Hunter <[email protected]>

commit 401136bb084fd021acd9f8c51b52fe0a25e326b2 upstream.

While walking code towards a FUP ip, the packet state is INTEL_PT_STATE_FUP or INTEL_PT_STATE_FUP_NO_TIP. That was mishandled resulting in the state becoming INTEL_PT_STATE_IN_SYNC prematurely. The result was an occasional lost EXSTOP event.

---
 tools/perf/util/intel-pt-decoder/intel-pt-decoder.c |   21 ++++++--------------
 1 file changed, 7 insertions(+), 14 deletions(-)
tools/perf/util/intel-pt-decoder/intel-pt-decoder.c +7 -14
@@ -1129,6 +1129,7 @@ static int intel_pt_walk_fup(struct inte
 			return 0;
 		if (err == -EAGAIN ||
 		    intel_pt_fup_with_nlip(decoder, &intel_pt_insn, ip, err)) {
+			decoder->pkt_state = INTEL_PT_STATE_IN_SYNC;
 			if (intel_pt_fup_event(decoder))
 				return 0;
 			return -EAGAIN;
@@ -1780,17 +1781,13 @@ next:
 			}
 			if (decoder->set_fup_mwait)
 				no_tip = true;
+			if (no_tip)
+				decoder->pkt_state = INTEL_PT_STATE_FUP_NO_TIP;
+			else
+				decoder->pkt_state = INTEL_PT_STATE_FUP;
 			err = intel_pt_walk_fup(decoder);
-			if (err != -EAGAIN) {
-				if (err)
-					return err;
-				if (no_tip)
-					decoder->pkt_state =
-						INTEL_PT_STATE_FUP_NO_TIP;
-				else
-					decoder->pkt_state = INTEL_PT_STATE_FUP;
-				return 0;
-			}
+			if (err != -EAGAIN)
+				return err;
 			if (no_tip) {
 				no_tip = false;
 				break;
@@ -2375,15 +2372,11 @@ const struct intel_pt_state *intel_pt_de
 			err = intel_pt_walk_tip(decoder);
 			break;
 		case INTEL_PT_STATE_FUP:
-			decoder->pkt_state = INTEL_PT_STATE_IN_SYNC;
 			err = intel_pt_walk_fup(decoder);
 			if (err == -EAGAIN)
 				err = intel_pt_walk_fup_tip(decoder);
-			else if (!err)
-				decoder->pkt_state = INTEL_PT_STATE_FUP;
 			break;
 		case INTEL_PT_STATE_FUP_NO_TIP:
-			decoder->pkt_state = INTEL_PT_STATE_IN_SYNC;
 			err = intel_pt_walk_fup(decoder);
 			if (err == -EAGAIN)
 				err = intel_pt_walk_trace(decoder);
author maintainer
#184 lore raw

PATCH 184/228 ocfs2: change slot number type s16 to u16

In reply to Greg Kroah-Hartman

From: Junxiao Bi <[email protected]>

commit 38d51b2dd171ad973afc1f5faab825ed05a2d5e9 upstream.

Dan Carpenter reported the following static checker warning.

	fs/ocfs2/super.c:1269 ocfs2_parse_options() warn: '(-1)' 65535 can't fit into 32767 'mopt->slot'
	fs/ocfs2/suballoc.c:859 ocfs2_init_inode_steal_slot() warn: '(-1)' 65535 can't fit into 32767 'osb->s_inode_steal_slot'
	fs/ocfs2/suballoc.c:867 ocfs2_init_meta_steal_slot() warn: '(-1)' 65535 can't fit into 32767 'osb->s_meta_steal_slot'

That's because OCFS2_INVALID_SLOT is (u16)-1. Slot number in ocfs2 can be never negative, so change s16 to u16.

---
 fs/ocfs2/ocfs2.h    |    4 ++--
 fs/ocfs2/suballoc.c |    4 ++--
 fs/ocfs2/super.c    |    4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)
fs/ocfs2/ocfs2.h +2 -2
@@ -336,8 +336,8 @@ struct ocfs2_super
 	spinlock_t osb_lock;
 	u32 s_next_generation;
 	unsigned long osb_flags;
-	s16 s_inode_steal_slot;
-	s16 s_meta_steal_slot;
+	u16 s_inode_steal_slot;
+	u16 s_meta_steal_slot;
 	atomic_t s_num_inodes_stolen;
 	atomic_t s_num_meta_stolen;
 
fs/ocfs2/suballoc.c +2 -2
@@ -895,9 +895,9 @@ static void __ocfs2_set_steal_slot(struc
 {
 	spin_lock(&osb->osb_lock);
 	if (type == INODE_ALLOC_SYSTEM_INODE)
-		osb->s_inode_steal_slot = slot;
+		osb->s_inode_steal_slot = (u16)slot;
 	else if (type == EXTENT_ALLOC_SYSTEM_INODE)
-		osb->s_meta_steal_slot = slot;
+		osb->s_meta_steal_slot = (u16)slot;
 	spin_unlock(&osb->osb_lock);
 }
 
fs/ocfs2/super.c +2 -2
@@ -92,7 +92,7 @@ struct mount_options
 	unsigned long	commit_interval;
 	unsigned long	mount_opt;
 	unsigned int	atime_quantum;
-	signed short	slot;
+	unsigned short	slot;
 	int		localalloc_opt;
 	unsigned int	resv_level;
 	int		dir_resv_level;
@@ -1369,7 +1369,7 @@ static int ocfs2_parse_options(struct su
 				goto bail;
 			}
 			if (option)
-				mopt->slot = (s16)option;
+				mopt->slot = (u16)option;
 			break;
 		case Opt_commit:
 			if (match_int(&args[0], &option)) {
author maintainer
#218 lore raw

PATCH 217/228 ALSA: echoaudio: Fix potential Oops in snd_echo_resume()

In reply to Greg Kroah-Hartman

From: Dinghao Liu <[email protected]>

[ Upstream commit 5a25de6df789cc805a9b8ba7ab5deef5067af47e ]

Freeing chip on error may lead to an Oops at the next time the system goes to resume. Fix this by removing all snd_echo_free() calls on error.

Fixes 47b5d028fdce8 ("ALSA: Echoaudio - Add suspend support #2")
---
 sound/pci/echoaudio/echoaudio.c | 2 --
 1 file changed, 2 deletions(-)
sound/pci/echoaudio/echoaudio.c +0 -2
index e1f0bcd45c378..b58a098a7270d 100644
@@ -2215,7 +2215,6 @@ static int snd_echo_resume(struct device *dev)
 	if (err < 0) {
 		kfree(commpage_bak);
 		dev_err(dev, "resume init_hw err=%d\n", err);
-		snd_echo_free(chip);
 		return err;
 	}
 
@@ -2242,7 +2241,6 @@ static int snd_echo_resume(struct device *dev)
 	if (request_irq(pci->irq, snd_echo_interrupt, IRQF_SHARED,
 			KBUILD_MODNAME, chip)) {
 		dev_err(chip->card->dev, "cannot grab irq\n");
-		snd_echo_free(chip);
 		return -EBUSY;
 	}
 	chip->irq = pci->irq;
Signature · 1 line
2.25.1
author maintainer
#222 lore raw

PATCH 221/228 khugepaged: retract_page_tables() remember to test exit

In reply to Greg Kroah-Hartman

From: Hugh Dickins <[email protected]>

commit 18e77600f7a1ed69f8ce46c9e11cad0985712dfa upstream.

Only once have I seen this scenario (and forgot even to notice what forced the eventual crash): a sequence of "BUG: Bad page map" alerts from vm_normal_page(), from zap_pte_range() servicing exit_mmap(); pmd:00000000, pte values corresponding to data in physical page 0.

The pte mappings being zapped in this case were supposed to be from a huge page of ext4 text (but could as well have been shmem): my belief is that it was racing with collapse_file()'s retract_page_tables(), found *pmd pointing to a page table, locked it, but *pmd had become 0 by the time start_pte was decided.

In most cases, that possibility is excluded by holding mmap lock; but exit_mmap() proceeds without mmap lock. Most of what's run by khugepaged checks khugepaged_test_exit() after acquiring mmap lock:
khugepaged_collapse_pte_mapped_thps() and hugepage_vma_revalidate() do so, for example. But retract_page_tables() did not: fix that.

The fix is for retract_page_tables() to check khugepaged_test_exit(), after acquiring mmap lock, before doing anything to the page table. Getting the mmap lock serializes with __mmput(), which briefly takes and drops it in __khugepaged_exit(); then the khugepaged_test_exit() check on mm_users makes sure we don't touch the page table once exit_mmap() might reach it, since exit_mmap() will be proceeding without mmap lock, not expecting anyone to be racing with it.

Fixes f3f0e1d2150b ("khugepaged: add support of collapse for tmpfs/shmem pages")
Cc Andrea Arcangeli <[email protected]>
Cc Mike Kravetz <[email protected]>
Cc Song Liu <[email protected]>
Cc <[email protected]> [4.8+]
---
 mm/khugepaged.c |   22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)
mm/khugepaged.c +13 -9
@@ -1252,6 +1252,7 @@ static void collect_mm_slot(struct mm_sl
 static void retract_page_tables(struct address_space *mapping, pgoff_t pgoff)
 {
 	struct vm_area_struct *vma;
+	struct mm_struct *mm;
 	unsigned long addr;
 	pmd_t *pmd, _pmd;
 
@@ -1265,7 +1266,8 @@ static void retract_page_tables(struct a
 			continue;
 		if (vma->vm_end < addr + HPAGE_PMD_SIZE)
 			continue;
-		pmd = mm_find_pmd(vma->vm_mm, addr);
+		mm = vma->vm_mm;
+		pmd = mm_find_pmd(mm, addr);
 		if (!pmd)
 			continue;
 		/*
@@ -1274,14 +1276,16 @@ static void retract_page_tables(struct a
 		 * re-fault. Not ideal, but it's more important to not disturb
 		 * the system too much.
 		 */
-		if (down_write_trylock(&vma->vm_mm->mmap_sem)) {
-			spinlock_t *ptl = pmd_lock(vma->vm_mm, pmd);
-			/* assume page table is clear */
-			_pmd = pmdp_collapse_flush(vma, addr, pmd);
-			spin_unlock(ptl);
-			up_write(&vma->vm_mm->mmap_sem);
-			atomic_long_dec(&vma->vm_mm->nr_ptes);
-			pte_free(vma->vm_mm, pmd_pgtable(_pmd));
+		if (down_write_trylock(&mm->mmap_sem)) {
+			if (!khugepaged_test_exit(mm)) {
+				spinlock_t *ptl = pmd_lock(mm, pmd);
+				/* assume page table is clear */
+				_pmd = pmdp_collapse_flush(vma, addr, pmd);
+				spin_unlock(ptl);
+				atomic_long_dec(&mm->nr_ptes);
+				pte_free(mm, pmd_pgtable(_pmd));
+			}
+			up_write(&mm->mmap_sem);
 		}
 	}
 	i_mmap_unlock_write(mapping);
author maintainer
#223 lore raw

PATCH 222/228 genirq/affinity: Handle affinity setting on inactive interrupts correctly

In reply to Greg Kroah-Hartman

From: Thomas Gleixner <[email protected]>

commit baedb87d1b53532f81b4bd0387f83b05d4f7eb9a upstream.

Setting interrupt affinity on inactive interrupts is inconsistent when hierarchical irq domains are enabled. The core code should just store the affinity and not call into the irq chip driver for inactive interrupts because the chip drivers may not be in a state to handle such requests.

X86 has a hacky workaround for that but all other irq chips have not which causes problems e.g. on GIC V3 ITS.

Instead of adding more ugly hacks all over the place, solve the problem in the core code. If the affinity is set on an inactive interrupt then:

- Store it in the irq descriptors affinity mask
- Update the effective affinity to reflect that so user space has a consistent view
- Don't call into the irq chip driver

This is the core equivalent of the X86 workaround and works correctly because the affinity setting is established in the irq chip when the interrupt is activated later on.

Note, that this is only effective when hierarchical irq domains are enabled by the architecture. Doing it unconditionally would break legacy irq chip implementations.

For hierarchial irq domains this works correctly as none of the drivers can have a dependency on affinity setting in inactive state by design.

Remove the X86 workaround as it is not longer required.

Fixes 02edee152d6e ("x86/apic/vector: Ignore set_affinity call for inactive interrupts")
[[email protected] - 4.14 never had the x86 workaround, so skip x86 changes]
---
 kernel/irq/manage.c |   37 +++++++++++++++++++++++++++++++++++--
 1 file changed, 35 insertions(+), 2 deletions(-)
kernel/irq/manage.c +35 -2
@@ -168,9 +168,9 @@ void irq_set_thread_affinity(struct irq_
 			set_bit(IRQTF_AFFINITY, &action->thread_flags);
 }
 
+#ifdef CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK
 static void irq_validate_effective_affinity(struct irq_data *data)
 {
-#ifdef CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK
 	const struct cpumask *m = irq_data_get_effective_affinity_mask(data);
 	struct irq_chip *chip = irq_data_get_irq_chip(data);
 
@@ -178,9 +178,19 @@ static void irq_validate_effective_affin
 		return;
 	pr_warn_once("irq_chip %s did not update eff. affinity mask of irq %u\n",
 		     chip->name, data->irq);
-#endif
 }
 
+static inline void irq_init_effective_affinity(struct irq_data *data,
+					       const struct cpumask *mask)
+{
+	cpumask_copy(irq_data_get_effective_affinity_mask(data), mask);
+}
+#else
+static inline void irq_validate_effective_affinity(struct irq_data *data) { }
+static inline void irq_init_effective_affinity(struct irq_data *data,
+					       const struct cpumask *mask) { }
+#endif
+
 int irq_do_set_affinity(struct irq_data *data, const struct cpumask *mask,
 			bool force)
 {
@@ -205,6 +215,26 @@ int irq_do_set_affinity(struct irq_data
 	return ret;
 }
 
+static bool irq_set_affinity_deactivated(struct irq_data *data,
+					 const struct cpumask *mask, bool force)
+{
+	struct irq_desc *desc = irq_data_to_desc(data);
+
+	/*
+	 * If the interrupt is not yet activated, just store the affinity
+	 * mask and do not call the chip driver at all. On activation the
+	 * driver has to make sure anyway that the interrupt is in a
+	 * useable state so startup works.
+	 */
+	if (!IS_ENABLED(CONFIG_IRQ_DOMAIN_HIERARCHY) || irqd_is_activated(data))
+		return false;
+
+	cpumask_copy(desc->irq_common_data.affinity, mask);
+	irq_init_effective_affinity(data, mask);
+	irqd_set(data, IRQD_AFFINITY_SET);
+	return true;
+}
+
 int irq_set_affinity_locked(struct irq_data *data, const struct cpumask *mask,
 			    bool force)
 {
@@ -215,6 +245,9 @@ int irq_set_affinity_locked(struct irq_d
 	if (!chip || !chip->irq_set_affinity)
 		return -EINVAL;
 
+	if (irq_set_affinity_deactivated(data, mask, force))
+		return 0;
+
 	if (irq_can_move_pcntxt(data)) {
 		ret = irq_do_set_affinity(data, mask, force);
 	} else {
author maintainer
#220 lore raw

PATCH 219/228 tools build feature: Quote CC and CXX for their arguments

In reply to Greg Kroah-Hartman

From: Daniel Díaz <[email protected]>

[ Upstream commit fa5c893181ed2ca2f96552f50073786d2cfce6c0 ]

When using a cross-compilation environment, such as OpenEmbedded, the CC an CXX variables are set to something more than just a
command: there are arguments (such as --sysroot) that need to be passed on to the compiler so that the right set of headers and libraries are used.

For the particular case that our systems detected, CC is set to the following:

  export CC="aarch64-linaro-linux-gcc  --sysroot=/oe/build/tmp/work/machine/perf/1.0-r9/recipe-sysroot"

Without quotes, detection is as follows:

Auto-detecting system features:
... dwarf: [ OFF ]
... dwarf_getlocations: [ OFF ]
... glibc: [ OFF ]
... gtk2: [ OFF ]

  ...                        libbfd: [ OFF ]
  ...                        libcap: [ OFF ]
  ...                        libelf: [ OFF ]
  ...                       libnuma: [ OFF ]
  ...        numa_num_possible_cpus: [ OFF ]
  ...                       libperl: [ OFF ]
  ...                     libpython: [ OFF ]
  ...                     libcrypto: [ OFF ]
  ...                     libunwind: [ OFF ]

... libdw-dwarf-unwind: [ OFF ]
... zlib: [ OFF ]
... lzma: [ OFF ]
... get_cpuid: [ OFF ]
... bpf: [ OFF ]
... libaio: [ OFF ]
... libzstd: [ OFF ]
... disassembler-four-args: [ OFF ]

Makefile.config:414: *** No gnu/libc-version.h found, please install glibc-dev[el]. Stop. Makefile.perf:230: recipe for target 'sub-make' failed
make[1]: *** [sub-make] Error 2
Makefile:69: recipe for target 'all' failed
make: *** [all] Error 2

With CC and CXX quoted, some of those features are now detected.

Fixes e3232c2f39ac ("tools build feature: Use CC and CXX from parent")
Cc Alexei Starovoitov <[email protected]>
Cc Andrii Nakryiko <[email protected]>
Cc Daniel Borkmann <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc John Fastabend <[email protected]>
Cc KP Singh <[email protected]>
Cc Martin KaFai Lau <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Song Liu <[email protected]>
Cc Stephane Eranian <[email protected]>
Cc Yonghong Song <[email protected]>
---
 tools/build/Makefile.feature | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/build/Makefile.feature +1 -1
index a2389f0c0b1c0..79427b09590c5 100644
@@ -7,7 +7,7 @@ endif
 
 feature_check = $(eval $(feature_check_code))
 define feature_check_code
-  feature-$(1) := $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CC=$(CC) CXX=$(CXX) CFLAGS="$(EXTRA_CFLAGS) $(FEATURE_CHECK_CFLAGS-$(1))" CXXFLAGS="$(EXTRA_CXXFLAGS) $(FEATURE_CHECK_CXXFLAGS-$(1))" LDFLAGS="$(LDFLAGS) $(FEATURE_CHECK_LDFLAGS-$(1))" -C $(feature_dir) $(OUTPUT_FEATURES)test-$1.bin >/dev/null 2>/dev/null && echo 1 || echo 0)
+  feature-$(1) := $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CC="$(CC)" CXX="$(CXX)" CFLAGS="$(EXTRA_CFLAGS) $(FEATURE_CHECK_CFLAGS-$(1))" CXXFLAGS="$(EXTRA_CXXFLAGS) $(FEATURE_CHECK_CXXFLAGS-$(1))" LDFLAGS="$(LDFLAGS) $(FEATURE_CHECK_LDFLAGS-$(1))" -C $(feature_dir) $(OUTPUT_FEATURES)test-$1.bin >/dev/null 2>/dev/null && echo 1 || echo 0)
 endef
 
 feature_set = $(eval $(feature_set_code))
Signature · 1 line
2.25.1
author maintainer
#226 lore raw

PATCH 225/228 dm cache: pass cache structure to mode functions

In reply to Greg Kroah-Hartman

From: Mike Snitzer <[email protected]>

commit 8e3c3827776fc93728c0c8d7c7b731226dc6ee23 upstream.

No functional changes, just a bit cleaner than passing cache_features structure.

---
 drivers/md/dm-cache-target.c |   32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)
drivers/md/dm-cache-target.c +16 -16
@@ -515,19 +515,19 @@ struct dm_cache_migration {
 
 /*----------------------------------------------------------------*/
 
-static bool writethrough_mode(struct cache_features *f)
+static bool writethrough_mode(struct cache *cache)
 {
-	return f->io_mode == CM_IO_WRITETHROUGH;
+	return cache->features.io_mode == CM_IO_WRITETHROUGH;
 }
 
-static bool writeback_mode(struct cache_features *f)
+static bool writeback_mode(struct cache *cache)
 {
-	return f->io_mode == CM_IO_WRITEBACK;
+	return cache->features.io_mode == CM_IO_WRITEBACK;
 }
 
-static inline bool passthrough_mode(struct cache_features *f)
+static inline bool passthrough_mode(struct cache *cache)
 {
-	return unlikely(f->io_mode == CM_IO_PASSTHROUGH);
+	return unlikely(cache->features.io_mode == CM_IO_PASSTHROUGH);
 }
 
 /*----------------------------------------------------------------*/
@@ -544,7 +544,7 @@ static void wake_deferred_writethrough_w
 
 static void wake_migration_worker(struct cache *cache)
 {
-	if (passthrough_mode(&cache->features))
+	if (passthrough_mode(cache))
 		return;
 
 	queue_work(cache->wq, &cache->migration_worker);
@@ -626,7 +626,7 @@ static unsigned lock_level(struct bio *b
 
 static size_t get_per_bio_data_size(struct cache *cache)
 {
-	return writethrough_mode(&cache->features) ? PB_DATA_SIZE_WT : PB_DATA_SIZE_WB;
+	return writethrough_mode(cache) ? PB_DATA_SIZE_WT : PB_DATA_SIZE_WB;
 }
 
 static struct per_bio_data *get_per_bio_data(struct bio *bio, size_t data_size)
@@ -1209,7 +1209,7 @@ static bool bio_writes_complete_block(st
 
 static bool optimisable_bio(struct cache *cache, struct bio *bio, dm_oblock_t block)
 {
-	return writeback_mode(&cache->features) &&
+	return writeback_mode(cache) &&
 		(is_discarded_oblock(cache, block) || bio_writes_complete_block(cache, bio));
 }
 
@@ -1862,7 +1862,7 @@ static int map_bio(struct cache *cache,
 		 * Passthrough always maps to the origin, invalidating any
 		 * cache blocks that are written to.
 		 */
-		if (passthrough_mode(&cache->features)) {
+		if (passthrough_mode(cache)) {
 			if (bio_data_dir(bio) == WRITE) {
 				bio_drop_shared_lock(cache, bio);
 				atomic_inc(&cache->stats.demotion);
@@ -1871,7 +1871,7 @@ static int map_bio(struct cache *cache,
 				remap_to_origin_clear_discard(cache, bio, block);
 
 		} else {
-			if (bio_data_dir(bio) == WRITE && writethrough_mode(&cache->features) &&
+			if (bio_data_dir(bio) == WRITE && writethrough_mode(cache) &&
 			    !is_dirty(cache, cblock)) {
 				remap_to_origin_then_cache(cache, bio, block, cblock);
 				accounted_begin(cache, bio);
@@ -2649,7 +2649,7 @@ static int cache_create(struct cache_arg
 		goto bad;
 	}
 
-	if (passthrough_mode(&cache->features)) {
+	if (passthrough_mode(cache)) {
 		bool all_clean;
 
 		r = dm_cache_metadata_all_clean(cache->cmd, &all_clean);
@@ -3279,13 +3279,13 @@ static void cache_status(struct dm_targe
 		else
 			DMEMIT("1 ");
 
-		if (writethrough_mode(&cache->features))
+		if (writethrough_mode(cache))
 			DMEMIT("writethrough ");
 
-		else if (passthrough_mode(&cache->features))
+		else if (passthrough_mode(cache))
 			DMEMIT("passthrough ");
 
-		else if (writeback_mode(&cache->features))
+		else if (writeback_mode(cache))
 			DMEMIT("writeback ");
 
 		else {
@@ -3451,7 +3451,7 @@ static int process_invalidate_cblocks_me
 	unsigned i;
 	struct cblock_range range;
 
-	if (!passthrough_mode(&cache->features)) {
+	if (!passthrough_mode(cache)) {
 		DMERR("%s: cache has to be in passthrough mode for invalidation",
 		      cache_device_name(cache));
 		return -EPERM;
author maintainer
#221 lore raw

PATCH 220/228 sh: landisk: Add missing initialization of sh_io_port_base

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 0c64a0dce51faa9c706fdf1f957d6f19878f4b81 ]

The Landisk setup code maps the CF IDE area using ioremap_prot(), and passes the resulting virtual addresses to the pata_platform driver, disguising them as I/O port addresses. Hence the pata_platform driver translates them again using ioport_map().
As CONFIG_GENERIC_IOMAP=n, and CONFIG_HAS_IOPORT_MAP=y, the SuperH-specific mapping code in arch/sh/kernel/ioport.c translates I/O port addresses to virtual addresses by adding sh_io_port_base, which defaults to -1, thus breaking the assumption of an identity mapping.

Fix this by setting sh_io_port_base to zero.

Fixes 37b7a97884ba64bf ("sh: machvec IO death.")
---
 arch/sh/boards/mach-landisk/setup.c | 3 +++
 1 file changed, 3 insertions(+)
arch/sh/boards/mach-landisk/setup.c +3 -0
index f1147caebacf0..af69fb7fef7c7 100644
@@ -85,6 +85,9 @@ device_initcall(landisk_devices_setup);
 
 static void __init landisk_setup(char **cmdline_p)
 {
+	/* I/O port identity mapping */
+	__set_io_port_base(0);
+
 	/* LED ON */
 	__raw_writeb(__raw_readb(PA_LED) | 0x03, PA_LED);
 
Signature · 1 line
2.25.1
author maintainer
#217 lore raw

PATCH 216/228 mfd: dln2: Run event handler loop under spinlock

In reply to Greg Kroah-Hartman

From: Andy Shevchenko <[email protected]>

[ Upstream commit 3d858942250820b9adc35f963a257481d6d4c81d ]

The event handler loop must be run with interrupts disabled. Otherwise we will have a warning:

[ 1970.785649] irq 31 handler lineevent_irq_handler+0x0/0x20 enabled interrupts
[ 1970.792739] WARNING: CPU: 0 PID: 0 at kernel/irq/handle.c:159 __handle_irq_event_percpu+0x162/0x170
[ 1970.860732] RIP: 0010:__handle_irq_event_percpu+0x162/0x170
...
[ 1970.946994] Call Trace:
[ 1970.949446]  <IRQ>
[ 1970.951471]  handle_irq_event_percpu+0x2c/0x80
[ 1970.955921]  handle_irq_event+0x23/0x43
[ 1970.959766]  handle_simple_irq+0x57/0x70
[ 1970.963695]  generic_handle_irq+0x42/0x50
[ 1970.967717]  dln2_rx+0xc1/0x210 [dln2]
[ 1970.971479]  ? usb_hcd_unmap_urb_for_dma+0xa6/0x1c0
[ 1970.976362]  __usb_hcd_giveback_urb+0x77/0xe0
[ 1970.980727]  usb_giveback_urb_bh+0x8e/0xe0
[ 1970.984837]  tasklet_action_common.isra.0+0x4a/0xe0

...

Recently xHCI driver switched to tasklets in the commit 36dc01657b49 ("usb: host: xhci: Support running urb giveback in tasklet context").

The handle_irq_event_* functions are expected to be called with interrupts disabled and they rightfully complain here because we run in tasklet context with interrupts enabled.

Use a event spinlock to protect event handler from being interrupted.

Note, that there are only two users of this GPIO and ADC drivers and both of them are using generic_handle_irq() which makes above happen.

Fixes 338a12814297 ("mfd: Add support for Diolan DLN-2 devices")
---
 drivers/mfd/dln2.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/mfd/dln2.c +4 -0
index 672831d5ee32e..97a69cd6f1278 100644
@@ -294,7 +294,11 @@ static void dln2_rx(struct urb *urb)
 	len = urb->actual_length - sizeof(struct dln2_header);
 
 	if (handle == DLN2_HANDLE_EVENT) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&dln2->event_cb_lock, flags);
 		dln2_run_event_callbacks(dln2, id, echo, data, len);
+		spin_unlock_irqrestore(&dln2->event_cb_lock, flags);
 	} else {
 		/* URB will be re-submitted in _dln2_transfer (free_rx_slot) */
 		if (dln2_transfer_complete(dln2, urb, handle, echo))
Signature · 1 line
2.25.1
author maintainer
#225 lore raw

PATCH 224/228 arm64: dts: marvell: espressobin: add ethernet alias

In reply to Greg Kroah-Hartman

From: Tomasz Maciej Nowak <[email protected]>

commit 5253cb8c00a6f4356760efb38bca0e0393aa06de upstream.

The maker of this board and its variants, stores MAC address in U-Boot environment. Add alias for bootloader to recognise, to which ethernet node inject the factory MAC address.

[pali: Backported to 5.4 and older versions]
---
 arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts |    6 ++++++
 1 file changed, 6 insertions(+)
arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +6 -0
@@ -52,6 +52,12 @@
 	model = "Globalscale Marvell ESPRESSOBin Board";
 	compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710";
 
+	aliases {
+		ethernet0 = &eth0;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
author maintainer
#224 lore raw

PATCH 223/228 genirq/affinity: Make affinity setting if activated opt-in

In reply to Greg Kroah-Hartman

From: Thomas Gleixner <[email protected]>

commit f0c7baca180046824e07fc5f1326e83a8fd150c7 upstream.

John reported that on a RK3288 system the perf per CPU interrupts are all affine to CPU0 and provided the analysis:

"It looks like what happens is that because the interrupts are not per-CPU
in the hardware, armpmu_request_irq() calls irq_force_affinity() while the interrupt is deactivated and then request_irq() with IRQF_PERCPU | IRQF_NOBALANCING.

Now when irq_startup() runs with IRQ_STARTUP_NORMAL, it calls irq_setup_affinity() which returns early because IRQF_PERCPU and IRQF_NOBALANCING are set, leaving the interrupt on its original CPU."

This was broken by the recent commit which blocked interrupt affinity setting in hardware before activation of the interrupt. While this works in general, it does not work for this particular case. As contrary to the initial analysis not all interrupt chip drivers implement an activate callback, the safe cure is to make the deferred interrupt affinity setting at activation time opt-in.

Implement the necessary core logic and make the two irqchip implementations for which this is required opt-in. In hindsight this would have been the right thing to do, but ...

---
 arch/x86/kernel/apic/vector.c    |    4 ++++
 drivers/irqchip/irq-gic-v3-its.c |    5 ++++-
 include/linux/irq.h              |   12 ++++++++++++
 kernel/irq/manage.c              |    6 +++++-
 4 files changed, 25 insertions(+), 2 deletions(-)
arch/x86/kernel/apic/vector.c +4 -0
@@ -368,6 +368,10 @@ static int x86_vector_alloc_irqs(struct
 		irq_data->chip = &lapic_controller;
 		irq_data->chip_data = data;
 		irq_data->hwirq = virq + i;
+
+		/* Don't invoke affinity setter on deactivated interrupts */
+		irqd_set_affinity_on_activate(irq_data);
+
 		err = assign_irq_vector_policy(virq + i, node, data, info,
 					       irq_data);
 		if (err) {
drivers/irqchip/irq-gic-v3-its.c +4 -1
@@ -2199,6 +2199,7 @@ static int its_irq_domain_alloc(struct i
 {
 	msi_alloc_info_t *info = args;
 	struct its_device *its_dev = info->scratchpad[0].ptr;
+	struct irq_data *irqd;
 	irq_hw_number_t hwirq;
 	int err;
 	int i;
@@ -2214,7 +2215,9 @@ static int its_irq_domain_alloc(struct i
 
 		irq_domain_set_hwirq_and_chip(domain, virq + i,
 					      hwirq + i, &its_irq_chip, its_dev);
-		irqd_set_single_target(irq_desc_get_irq_data(irq_to_desc(virq + i)));
+		irqd = irq_get_irq_data(virq + i);
+		irqd_set_single_target(irqd);
+		irqd_set_affinity_on_activate(irqd);
 		pr_debug("ID:%d pID:%d vID:%d\n",
 			 (int)(hwirq + i - its_dev->event_map.lpi_base),
 			 (int)(hwirq + i), virq + i);
include/linux/irq.h +12 -0
@@ -212,6 +212,8 @@ struct irq_data {
  *				  mask. Applies only to affinity managed irqs.
  * IRQD_SINGLE_TARGET		- IRQ allows only a single affinity target
  * IRQD_DEFAULT_TRIGGER_SET	- Expected trigger already been set
+ * IRQD_AFFINITY_ON_ACTIVATE	- Affinity is set on activation. Don't call
+ *				  irq_chip::irq_set_affinity() when deactivated.
  */
 enum {
 	IRQD_TRIGGER_MASK		= 0xf,
@@ -233,6 +235,7 @@ enum {
 	IRQD_MANAGED_SHUTDOWN		= (1 << 23),
 	IRQD_SINGLE_TARGET		= (1 << 24),
 	IRQD_DEFAULT_TRIGGER_SET	= (1 << 25),
+	IRQD_AFFINITY_ON_ACTIVATE	= (1 << 29),
 };
 
 #define __irqd_to_state(d) ACCESS_PRIVATE((d)->common, state_use_accessors)
@@ -377,6 +380,15 @@ static inline bool irqd_is_managed_and_s
 	return __irqd_to_state(d) & IRQD_MANAGED_SHUTDOWN;
 }
 
+static inline void irqd_set_affinity_on_activate(struct irq_data *d)
+{
+	__irqd_to_state(d) |= IRQD_AFFINITY_ON_ACTIVATE;
+}
+
+static inline bool irqd_affinity_on_activate(struct irq_data *d)
+{
+	return __irqd_to_state(d) & IRQD_AFFINITY_ON_ACTIVATE;
+}
 #undef __irqd_to_state
 
 static inline irq_hw_number_t irqd_to_hwirq(struct irq_data *d)
kernel/irq/manage.c +5 -1
@@ -221,12 +221,16 @@ static bool irq_set_affinity_deactivated
 	struct irq_desc *desc = irq_data_to_desc(data);
 
 	/*
+	 * Handle irq chips which can handle affinity only in activated
+	 * state correctly
+	 *
 	 * If the interrupt is not yet activated, just store the affinity
 	 * mask and do not call the chip driver at all. On activation the
 	 * driver has to make sure anyway that the interrupt is in a
 	 * useable state so startup works.
 	 */
-	if (!IS_ENABLED(CONFIG_IRQ_DOMAIN_HIERARCHY) || irqd_is_activated(data))
+	if (!IS_ENABLED(CONFIG_IRQ_DOMAIN_HIERARCHY) ||
+	    irqd_is_activated(data) || !irqd_affinity_on_activate(data))
 		return false;
 
 	cpumask_copy(desc->irq_common_data.affinity, mask);
author maintainer
#219 lore raw

PATCH 218/228 perf bench mem: Always memset source before memcpy

In reply to Greg Kroah-Hartman

From: Vincent Whitchurch <[email protected]>

[ Upstream commit 1beaef29c34154ccdcb3f1ae557f6883eda18840 ]

For memcpy, the source pages are memset to zero only when --cycles is used. This leads to wildly different results with or without --cycles, since all sources pages are likely to be mapped to the same zero page without explicit writes.

Before this fix:

$ export cmd="./perf stat -e LLC-loads -- ./perf bench \
  mem memcpy -s 1024MB -l 100 -f default"
$ $cmd
         2,935,826      LLC-loads
       3.821677452 seconds time elapsed
$ $cmd --cycles
       217,533,436      LLC-loads
       8.616725985 seconds time elapsed

After this fix:

$ $cmd
       214,459,686      LLC-loads
       8.674301124 seconds time elapsed
$ $cmd --cycles
       214,758,651      LLC-loads
       8.644480006 seconds time elapsed
Fixes 47b5757bac03c338 ("perf bench mem: Move boilerplate memory allocation to the infrastructure")
Cc Alexander Shishkin <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
---
 tools/perf/bench/mem-functions.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)
tools/perf/bench/mem-functions.c +11 -10
index 0251dd348124a..4864fc67d01b5 100644
@@ -222,12 +222,8 @@ static int bench_mem_common(int argc, const char **argv, struct bench_mem_info *
 	return 0;
 }
 
-static u64 do_memcpy_cycles(const struct function *r, size_t size, void *src, void *dst)
+static void memcpy_prefault(memcpy_t fn, size_t size, void *src, void *dst)
 {
-	u64 cycle_start = 0ULL, cycle_end = 0ULL;
-	memcpy_t fn = r->fn.memcpy;
-	int i;
-
 	/* Make sure to always prefault zero pages even if MMAP_THRESH is crossed: */
 	memset(src, 0, size);
 
@@ -236,6 +232,15 @@ static u64 do_memcpy_cycles(const struct function *r, size_t size, void *src, vo
 	 * to not measure page fault overhead:
 	 */
 	fn(dst, src, size);
+}
+
+static u64 do_memcpy_cycles(const struct function *r, size_t size, void *src, void *dst)
+{
+	u64 cycle_start = 0ULL, cycle_end = 0ULL;
+	memcpy_t fn = r->fn.memcpy;
+	int i;
+
+	memcpy_prefault(fn, size, src, dst);
 
 	cycle_start = get_cycles();
 	for (i = 0; i < nr_loops; ++i)
@@ -251,11 +256,7 @@ static double do_memcpy_gettimeofday(const struct function *r, size_t size, void
 	memcpy_t fn = r->fn.memcpy;
 	int i;
 
-	/*
-	 * We prefault the freshly allocated memory range here,
-	 * to not measure page fault overhead:
-	 */
-	fn(dst, src, size);
+	memcpy_prefault(fn, size, src, dst);
 
 	BUG_ON(gettimeofday(&tv_start, NULL));
 	for (i = 0; i < nr_loops; ++i)
Signature · 1 line
2.25.1
author maintainer
#229 lore raw

PATCH 228/228 drm/radeon: fix fb_div check in ni_init_smc_spll_table()

In reply to Greg Kroah-Hartman

From: Denis Efremov <[email protected]>

commit f29aa08852e1953e461f2d47ab13c34e14bc08b3 upstream.

clk_s is checked twice in a row in ni_init_smc_spll_table(). fb_div should be checked instead.

Fixes 69e0b57a91ad ("drm/radeon/kms: add dpm support for cayman (v5)")
---
 drivers/gpu/drm/radeon/ni_dpm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/radeon/ni_dpm.c +1 -1
@@ -2123,7 +2123,7 @@ static int ni_init_smc_spll_table(struct
 		if (p_div & ~(SMC_NISLANDS_SPLL_DIV_TABLE_PDIV_MASK >> SMC_NISLANDS_SPLL_DIV_TABLE_PDIV_SHIFT))
 			ret = -EINVAL;
 
-		if (clk_s & ~(SMC_NISLANDS_SPLL_DIV_TABLE_CLKS_MASK >> SMC_NISLANDS_SPLL_DIV_TABLE_CLKS_SHIFT))
+		if (fb_div & ~(SMC_NISLANDS_SPLL_DIV_TABLE_FBDIV_MASK >> SMC_NISLANDS_SPLL_DIV_TABLE_FBDIV_SHIFT))
 			ret = -EINVAL;
 
 		if (fb_div & ~(SMC_NISLANDS_SPLL_DIV_TABLE_FBDIV_MASK >> SMC_NISLANDS_SPLL_DIV_TABLE_FBDIV_SHIFT))
author maintainer
#228 lore raw

PATCH 227/228 dm cache: remove all obsolete writethrough-specific code

In reply to Greg Kroah-Hartman

From: Mike Snitzer <[email protected]>

commit 9958f1d9a04efb3db19134482b3f4c6897e0e7b8 upstream.

Now that the writethrough code is much simpler there is no need to track so much state or cascade bio submission (as was done, via writethrough_endio(), to issue origin then cache IO in series).

As such the obsolete writethrough list and workqueue is also removed.

---
 drivers/md/dm-cache-target.c |   82 -------------------------------------------
 1 file changed, 1 insertion(+), 81 deletions(-)
drivers/md/dm-cache-target.c +1 -81
@@ -410,7 +410,6 @@ struct cache {
 	spinlock_t lock;
 	struct list_head deferred_cells;
 	struct bio_list deferred_bios;
-	struct bio_list deferred_writethrough_bios;
 	sector_t migration_threshold;
 	wait_queue_head_t migration_wait;
 	atomic_t nr_allocated_migrations;
@@ -446,7 +445,6 @@ struct cache {
 	struct dm_kcopyd_client *copier;
 	struct workqueue_struct *wq;
 	struct work_struct deferred_bio_worker;
-	struct work_struct deferred_writethrough_worker;
 	struct work_struct migration_worker;
 	struct delayed_work waker;
 	struct dm_bio_prison_v2 *prison;
@@ -491,15 +489,6 @@ struct per_bio_data {
 	struct dm_bio_prison_cell_v2 *cell;
 	struct dm_hook_info hook_info;
 	sector_t len;
-
-	/*
-	 * writethrough fields.  These MUST remain at the end of this
-	 * structure and the 'cache' member must be the first as it
-	 * is used to determine the offset of the writethrough fields.
-	 */
-	struct cache *cache;
-	dm_cblock_t cblock;
-	struct dm_bio_details bio_details;
 };
 
 struct dm_cache_migration {
@@ -538,11 +527,6 @@ static void wake_deferred_bio_worker(str
 	queue_work(cache->wq, &cache->deferred_bio_worker);
 }
 
-static void wake_deferred_writethrough_worker(struct cache *cache)
-{
-	queue_work(cache->wq, &cache->deferred_writethrough_worker);
-}
-
 static void wake_migration_worker(struct cache *cache)
 {
 	if (passthrough_mode(cache))
@@ -619,15 +603,9 @@ static unsigned lock_level(struct bio *b
  * Per bio data
  *--------------------------------------------------------------*/
 
-/*
- * If using writeback, leave out struct per_bio_data's writethrough fields.
- */
-#define PB_DATA_SIZE_WB (offsetof(struct per_bio_data, cache))
-#define PB_DATA_SIZE_WT (sizeof(struct per_bio_data))
-
 static size_t get_per_bio_data_size(struct cache *cache)
 {
-	return writethrough_mode(cache) ? PB_DATA_SIZE_WT : PB_DATA_SIZE_WB;
+	return sizeof(struct per_bio_data);
 }
 
 static struct per_bio_data *get_per_bio_data(struct bio *bio, size_t data_size)
@@ -945,39 +923,6 @@ static void issue_op(struct bio *bio, vo
 	accounted_request(cache, bio);
 }
 
-static void defer_writethrough_bio(struct cache *cache, struct bio *bio)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cache->lock, flags);
-	bio_list_add(&cache->deferred_writethrough_bios, bio);
-	spin_unlock_irqrestore(&cache->lock, flags);
-
-	wake_deferred_writethrough_worker(cache);
-}
-
-static void writethrough_endio(struct bio *bio)
-{
-	struct per_bio_data *pb = get_per_bio_data(bio, PB_DATA_SIZE_WT);
-
-	dm_unhook_bio(&pb->hook_info, bio);
-
-	if (bio->bi_status) {
-		bio_endio(bio);
-		return;
-	}
-
-	dm_bio_restore(&pb->bio_details, bio);
-	remap_to_cache(pb->cache, bio, pb->cblock);
-
-	/*
-	 * We can't issue this bio directly, since we're in interrupt
-	 * context.  So it gets put on a bio list for processing by the
-	 * worker thread.
-	 */
-	defer_writethrough_bio(pb->cache, bio);
-}
-
 /*
  * When running in writethrough mode we need to send writes to clean blocks
  * to both the cache and origin devices.  Clone the bio and send them in parallel.
@@ -2013,28 +1958,6 @@ static void process_deferred_bios(struct
 		schedule_commit(&cache->committer);
 }
 
-static void process_deferred_writethrough_bios(struct work_struct *ws)
-{
-	struct cache *cache = container_of(ws, struct cache, deferred_writethrough_worker);
-
-	unsigned long flags;
-	struct bio_list bios;
-	struct bio *bio;
-
-	bio_list_init(&bios);
-
-	spin_lock_irqsave(&cache->lock, flags);
-	bio_list_merge(&bios, &cache->deferred_writethrough_bios);
-	bio_list_init(&cache->deferred_writethrough_bios);
-	spin_unlock_irqrestore(&cache->lock, flags);
-
-	/*
-	 * These bios have already been through accounted_begin()
-	 */
-	while ((bio = bio_list_pop(&bios)))
-		generic_make_request(bio);
-}
-
 /*----------------------------------------------------------------
  * Main worker loop
  *--------------------------------------------------------------*/
@@ -2690,7 +2613,6 @@ static int cache_create(struct cache_arg
 	spin_lock_init(&cache->lock);
 	INIT_LIST_HEAD(&cache->deferred_cells);
 	bio_list_init(&cache->deferred_bios);
-	bio_list_init(&cache->deferred_writethrough_bios);
 	atomic_set(&cache->nr_allocated_migrations, 0);
 	atomic_set(&cache->nr_io_migrations, 0);
 	init_waitqueue_head(&cache->migration_wait);
@@ -2729,8 +2651,6 @@ static int cache_create(struct cache_arg
 		goto bad;
 	}
 	INIT_WORK(&cache->deferred_bio_worker, process_deferred_bios);
-	INIT_WORK(&cache->deferred_writethrough_worker,
-		  process_deferred_writethrough_bios);
 	INIT_WORK(&cache->migration_worker, check_migrations);
 	INIT_DELAYED_WORK(&cache->waker, do_waker);
 
author maintainer
#227 lore raw

PATCH 226/228 dm cache: submit writethrough writes in parallel to origin and cache

In reply to Greg Kroah-Hartman

From: Mike Snitzer <[email protected]>

commit 2df3bae9a6543e90042291707b8db0cbfbae9ee9 upstream.

Discontinue issuing writethrough write IO in series to the origin and then cache.

Use bio_clone_fast() to create a new origin clone bio that will be mapped to the origin device and then bio_chain() it to the bio that gets remapped to the cache device. The origin clone bio does _not_ have a copy of the per_bio_data -- as such check_if_tick_bio_needed() will not be called.

The cache bio (parent bio) will not complete until the origin bio has completed -- this fulfills bio_clone_fast()'s requirements as well as the requirement to not complete the original IO until the write IO has completed to both the origin and cache device.

---
 drivers/md/dm-cache-target.c |   54 +++++++++++++++++++++++++++++--------------
 1 file changed, 37 insertions(+), 17 deletions(-)
drivers/md/dm-cache-target.c +37 -17
@@ -450,6 +450,7 @@ struct cache {
 	struct work_struct migration_worker;
 	struct delayed_work waker;
 	struct dm_bio_prison_v2 *prison;
+	struct bio_set *bs;
 
 	mempool_t *migration_pool;
 
@@ -868,16 +869,23 @@ static void check_if_tick_bio_needed(str
 	spin_unlock_irqrestore(&cache->lock, flags);
 }
 
-static void remap_to_origin_clear_discard(struct cache *cache, struct bio *bio,
-					  dm_oblock_t oblock)
+static void __remap_to_origin_clear_discard(struct cache *cache, struct bio *bio,
+					    dm_oblock_t oblock, bool bio_has_pbd)
 {
-	// FIXME: this is called way too much.
-	check_if_tick_bio_needed(cache, bio);
+	if (bio_has_pbd)
+		check_if_tick_bio_needed(cache, bio);
 	remap_to_origin(cache, bio);
 	if (bio_data_dir(bio) == WRITE)
 		clear_discard(cache, oblock_to_dblock(cache, oblock));
 }
 
+static void remap_to_origin_clear_discard(struct cache *cache, struct bio *bio,
+					  dm_oblock_t oblock)
+{
+	// FIXME: check_if_tick_bio_needed() is called way too much through this interface
+	__remap_to_origin_clear_discard(cache, bio, oblock, true);
+}
+
 static void remap_to_cache_dirty(struct cache *cache, struct bio *bio,
 				 dm_oblock_t oblock, dm_cblock_t cblock)
 {
@@ -971,23 +979,25 @@ static void writethrough_endio(struct bi
 }
 
 /*
- * FIXME: send in parallel, huge latency as is.
  * When running in writethrough mode we need to send writes to clean blocks
- * to both the cache and origin devices.  In future we'd like to clone the
- * bio and send them in parallel, but for now we're doing them in
- * series as this is easier.
+ * to both the cache and origin devices.  Clone the bio and send them in parallel.
  */
-static void remap_to_origin_then_cache(struct cache *cache, struct bio *bio,
-				       dm_oblock_t oblock, dm_cblock_t cblock)
+static void remap_to_origin_and_cache(struct cache *cache, struct bio *bio,
+				      dm_oblock_t oblock, dm_cblock_t cblock)
 {
-	struct per_bio_data *pb = get_per_bio_data(bio, PB_DATA_SIZE_WT);
+	struct bio *origin_bio = bio_clone_fast(bio, GFP_NOIO, cache->bs);
+
+	BUG_ON(!origin_bio);
 
-	pb->cache = cache;
-	pb->cblock = cblock;
-	dm_hook_bio(&pb->hook_info, bio, writethrough_endio, NULL);
-	dm_bio_record(&pb->bio_details, bio);
+	bio_chain(origin_bio, bio);
+	/*
+	 * Passing false to __remap_to_origin_clear_discard() skips
+	 * all code that might use per_bio_data (since clone doesn't have it)
+	 */
+	__remap_to_origin_clear_discard(cache, origin_bio, oblock, false);
+	submit_bio(origin_bio);
 
-	remap_to_origin_clear_discard(pb->cache, bio, oblock);
+	remap_to_cache(cache, bio, cblock);
 }
 
 /*----------------------------------------------------------------
@@ -1873,7 +1883,7 @@ static int map_bio(struct cache *cache,
 		} else {
 			if (bio_data_dir(bio) == WRITE && writethrough_mode(cache) &&
 			    !is_dirty(cache, cblock)) {
-				remap_to_origin_then_cache(cache, bio, block, cblock);
+				remap_to_origin_and_cache(cache, bio, block, cblock);
 				accounted_begin(cache, bio);
 			} else
 				remap_to_cache_dirty(cache, bio, block, cblock);
@@ -2132,6 +2142,9 @@ static void destroy(struct cache *cache)
 		kfree(cache->ctr_args[i]);
 	kfree(cache->ctr_args);
 
+	if (cache->bs)
+		bioset_free(cache->bs);
+
 	kfree(cache);
 }
 
@@ -2589,6 +2602,13 @@ static int cache_create(struct cache_arg
 	cache->features = ca->features;
 	ti->per_io_data_size = get_per_bio_data_size(cache);
 
+	if (writethrough_mode(cache)) {
+		/* Create bioset for writethrough bios issued to origin */
+		cache->bs = bioset_create(BIO_POOL_SIZE, 0, 0);
+		if (!cache->bs)
+			goto bad;
+	}
+
 	cache->callbacks.congested_fn = cache_is_congested;
 	dm_table_add_target_callbacks(ti->table, &cache->callbacks);
 
author maintainer
#191 lore raw

PATCH 191/228 watchdog: f71808e_wdt: clear watchdog timeout occurred flag

In reply to Greg Kroah-Hartman

From: Ahmad Fatoum <[email protected]>

commit 4f39d575844148fbf3081571a1f3b4ae04150958 upstream.

The flag indicating a watchdog timeout having occurred normally persists till Power-On Reset of the Fintek Super I/O chip. The user can clear it by writing a `1' to the bit.

The driver doesn't offer a restart method, so regular system reboot might not reset the Super I/O and if the watchdog isn't enabled, we won't touch the register containing the bit on the next boot. In this case all subsequent regular reboots will be wrongly flagged by the driver as being caused by the watchdog.

Fix this by having the flag cleared after read. This is also done by other drivers like those for the i6300esb and mpc8xxx_wdt.

---
 drivers/watchdog/f71808e_wdt.c |    7 +++++++
 1 file changed, 7 insertions(+)
drivers/watchdog/f71808e_wdt.c +7 -0
@@ -704,6 +704,13 @@ static int __init watchdog_init(int sioa
 	wdt_conf = superio_inb(sioaddr, F71808FG_REG_WDT_CONF);
 	watchdog.caused_reboot = wdt_conf & BIT(F71808FG_FLAG_WDTMOUT_STS);
 
+	/*
+	 * We don't want WDTMOUT_STS to stick around till regular reboot.
+	 * Write 1 to the bit to clear it to zero.
+	 */
+	superio_outb(sioaddr, F71808FG_REG_WDT_CONF,
+		     wdt_conf | BIT(F71808FG_FLAG_WDTMOUT_STS));
+
 	superio_exit(sioaddr);
 
 	err = watchdog_set_timeout(timeout);
author maintainer
#192 lore raw

PATCH 192/228 pseries: Fix 64 bit logical memory block panic

In reply to Greg Kroah-Hartman

From: Anton Blanchard <[email protected]>

commit 89c140bbaeee7a55ed0360a88f294ead2b95201b upstream.

Booting with a 4GB LMB size causes us to panic:

qemu-system-ppc64: OS terminated: OS panic:

      Memory block size not suitable: 0x0

Fix pseries_memory_block_size() to handle 64 bit LMBs.

---
 arch/powerpc/platforms/pseries/hotplug-memory.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/powerpc/platforms/pseries/hotplug-memory.c +1 -1
@@ -30,7 +30,7 @@ static bool rtas_hp_event;
 unsigned long pseries_memory_block_size(void)
 {
 	struct device_node *np;
-	unsigned int memblock_size = MIN_MEMORY_BLOCK_SIZE;
+	u64 memblock_size = MIN_MEMORY_BLOCK_SIZE;
 	struct resource r;
 
 	np = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
author maintainer
#188 lore raw

PATCH 188/228 tracing: Use trace_sched_process_free() instead of exit() for pid tracing

In reply to Greg Kroah-Hartman

From: Steven Rostedt (VMware) <[email protected]>

commit afcab636657421f7ebfa0783a91f90256bba0091 upstream.

On exit, if a process is preempted after the trace_sched_process_exit() tracepoint but before the process is done exiting, then when it gets scheduled in, the function tracers will not filter it properly against the function tracing pid filters.

That is because the function tracing pid filters hooks to the sched_process_exit() tracepoint to remove the exiting task's pid from the filter list. Because the filtering happens at the sched_switch tracepoint, when the exiting task schedules back in to finish up the exit, it will no longer be in the function pid filtering tables.

This was noticeable in the notrace self tests on a preemptable kernel, as the tests would fail as it exits and preempted after being taken off the notrace filter table and on scheduling back in it would not be in the notrace list, and then the ending of the exit function would trace. The test detected this and would fail.

Cc Namhyung Kim <[email protected]>
Fixes 1e10486ffee0a ("ftrace: Add 'function-fork' trace option")
Fixes c37775d57830a ("tracing: Add infrastructure to allow set_event_pid to follow children"
---
 kernel/trace/ftrace.c       |    4 ++--
 kernel/trace/trace_events.c |    4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)
kernel/trace/ftrace.c +2 -2
@@ -6242,12 +6242,12 @@ void ftrace_pid_follow_fork(struct trace
 	if (enable) {
 		register_trace_sched_process_fork(ftrace_pid_follow_sched_process_fork,
 						  tr);
-		register_trace_sched_process_exit(ftrace_pid_follow_sched_process_exit,
+		register_trace_sched_process_free(ftrace_pid_follow_sched_process_exit,
 						  tr);
 	} else {
 		unregister_trace_sched_process_fork(ftrace_pid_follow_sched_process_fork,
 						    tr);
-		unregister_trace_sched_process_exit(ftrace_pid_follow_sched_process_exit,
+		unregister_trace_sched_process_free(ftrace_pid_follow_sched_process_exit,
 						    tr);
 	}
 }
kernel/trace/trace_events.c +2 -2
@@ -533,12 +533,12 @@ void trace_event_follow_fork(struct trac
 	if (enable) {
 		register_trace_prio_sched_process_fork(event_filter_pid_sched_process_fork,
 						       tr, INT_MIN);
-		register_trace_prio_sched_process_exit(event_filter_pid_sched_process_exit,
+		register_trace_prio_sched_process_free(event_filter_pid_sched_process_exit,
 						       tr, INT_MAX);
 	} else {
 		unregister_trace_sched_process_fork(event_filter_pid_sched_process_fork,
 						    tr);
-		unregister_trace_sched_process_exit(event_filter_pid_sched_process_exit,
+		unregister_trace_sched_process_free(event_filter_pid_sched_process_exit,
 						    tr);
 	}
 }
author maintainer
#189 lore raw

PATCH 189/228 watchdog: f71808e_wdt: indicate WDIOF_CARDRESET support in watchdog_info.options

In reply to Greg Kroah-Hartman

From: Ahmad Fatoum <[email protected]>

commit e871e93fb08a619dfc015974a05768ed6880fd82 upstream.

The driver supports populating bootstatus with WDIOF_CARDRESET, but so far userspace couldn't portably determine whether absence of this flag meant no watchdog reset or no driver support. Or-in the bit to fix this.

---
 drivers/watchdog/f71808e_wdt.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/watchdog/f71808e_wdt.c +2 -1
@@ -690,7 +690,8 @@ static int __init watchdog_init(int sioa
 	watchdog.sioaddr = sioaddr;
 	watchdog.ident.options = WDIOC_SETTIMEOUT
 				| WDIOF_MAGICCLOSE
-				| WDIOF_KEEPALIVEPING;
+				| WDIOF_KEEPALIVEPING
+				| WDIOF_CARDRESET;
 
 	snprintf(watchdog.ident.identity,
 		sizeof(watchdog.ident.identity), "%s watchdog",
author maintainer
#190 lore raw

PATCH 190/228 watchdog: f71808e_wdt: remove use of wrong watchdog_info option

In reply to Greg Kroah-Hartman

From: Ahmad Fatoum <[email protected]>

commit 802141462d844f2e6a4d63a12260d79b7afc4c34 upstream.

The flags that should be or-ed into the watchdog_info.options by drivers all start with WDIOF_, e.g. WDIOF_SETTIMEOUT, which indicates that the driver's watchdog_ops has a usable set_timeout.

WDIOC_SETTIMEOUT was used instead, which expands to 0xc0045706, which equals:

WDIOF_FANFAULT | WDIOF_EXTERN1 | WDIOF_PRETIMEOUT | WDIOF_ALARMONLY | WDIOF_MAGICCLOSE | 0xc0045000

These were so far indicated to userspace on WDIOC_GETSUPPORT. As the driver has not yet been migrated to the new watchdog kernel API, the constant can just be dropped without substitute.

Fixes 96cb4eb019ce ("watchdog: f71808e_wdt: new watchdog driver for Fintek F71808E and F71882FG")
---
 drivers/watchdog/f71808e_wdt.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/watchdog/f71808e_wdt.c +1 -2
@@ -688,8 +688,7 @@ static int __init watchdog_init(int sioa
 	 * into the module have been registered yet.
 	 */
 	watchdog.sioaddr = sioaddr;
-	watchdog.ident.options = WDIOC_SETTIMEOUT
-				| WDIOF_MAGICCLOSE
+	watchdog.ident.options = WDIOF_MAGICCLOSE
 				| WDIOF_KEEPALIVEPING
 				| WDIOF_CARDRESET;
 
author maintainer
#215 lore raw

PATCH 214/228 fs/ufs: avoid potential u32 multiplication overflow

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit 88b2e9b06381551b707d980627ad0591191f7a2d ]

The 64 bit ino is being compared to the product of two u32 values, however, the multiplication is being performed using a 32 bit multiply so there is a potential of an overflow. To be fully safe, cast uspi->s_ncg to a u64 to ensure a 64 bit multiplication occurs to avoid any chance of overflow.

Fixes f3e2a520f5fb ("ufs: NFS support")
Cc Evgeniy Dushistov <[email protected]>
Cc Alexey Dobriyan <[email protected]>

Addresses-Coverity: ("Unintentional integer overflow")

---
 fs/ufs/super.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/ufs/super.c +1 -1
index 6440003f8ddc6..e3f3a0df60276 100644
@@ -99,7 +99,7 @@ static struct inode *ufs_nfs_get_inode(struct super_block *sb, u64 ino, u32 gene
 	struct ufs_sb_private_info *uspi = UFS_SB(sb)->s_uspi;
 	struct inode *inode;
 
-	if (ino < UFS_ROOTINO || ino > uspi->s_ncg * uspi->s_ipg)
+	if (ino < UFS_ROOTINO || ino > (u64)uspi->s_ncg * uspi->s_ipg)
 		return ERR_PTR(-ESTALE);
 
 	inode = ufs_iget(sb, ino);
Signature · 1 line
2.25.1
author maintainer
#187 lore raw

PATCH 187/228 tracing/hwlat: Honor the tracing_cpumask

In reply to Greg Kroah-Hartman

From: Kevin Hao <[email protected]>

commit 96b4833b6827a62c295b149213c68b559514c929 upstream.

In calculation of the cpu mask for the hwlat kernel thread, the wrong cpu mask is used instead of the tracing_cpumask, this causes the tracing/tracing_cpumask useless for hwlat tracer. Fixes it.

Cc Ingo Molnar <[email protected]>
Fixes 0330f7aa8ee6 ("tracing: Have hwlat trace migrate across tracing_cpumask CPUs")
---
 kernel/trace/trace_hwlat.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
kernel/trace/trace_hwlat.c +3 -2
@@ -272,6 +272,7 @@ static bool disable_migrate;
 static void move_to_next_cpu(void)
 {
 	struct cpumask *current_mask = &save_cpumask;
+	struct trace_array *tr = hwlat_trace;
 	int next_cpu;
 
 	if (disable_migrate)
@@ -285,7 +286,7 @@ static void move_to_next_cpu(void)
 		goto disable;
 
 	get_online_cpus();
-	cpumask_and(current_mask, cpu_online_mask, tracing_buffer_mask);
+	cpumask_and(current_mask, cpu_online_mask, tr->tracing_cpumask);
 	next_cpu = cpumask_next(smp_processor_id(), current_mask);
 	put_online_cpus();
 
@@ -359,7 +360,7 @@ static int start_kthread(struct trace_ar
 	/* Just pick the first CPU on first iteration */
 	current_mask = &save_cpumask;
 	get_online_cpus();
-	cpumask_and(current_mask, cpu_online_mask, tracing_buffer_mask);
+	cpumask_and(current_mask, cpu_online_mask, tr->tracing_cpumask);
 	put_online_cpus();
 	next_cpu = cpumask_first(current_mask);
 
author maintainer
#214 lore raw

PATCH 213/228 nfs: Fix getxattr kernel panic and memory overflow

In reply to Greg Kroah-Hartman

From: Jeffrey Mitchell <[email protected]>

[ Upstream commit b4487b93545214a9db8cbf32e86411677b0cca21 ]

Move the buffer size check to decode_attr_security_label() before memcpy() Only call memcpy() if the buffer is large enough

Fixes aa9c2669626c ("NFS: Client implementation of Labeled-NFS")
[Trond: clean up duplicate test of label->len != 0]
---
 fs/nfs/nfs4proc.c | 2 --
 fs/nfs/nfs4xdr.c  | 6 +++++-
 2 files changed, 5 insertions(+), 3 deletions(-)
fs/nfs/nfs4proc.c +0 -2
index a19bbcfab7c5e..4cfb84119e017 100644
@@ -5323,8 +5323,6 @@ static int _nfs4_get_security_label(struct inode *inode, void *buf,
 		return ret;
 	if (!(fattr.valid & NFS_ATTR_FATTR_V4_SECURITY_LABEL))
 		return -ENOENT;
-	if (buflen < label.len)
-		return -ERANGE;
 	return 0;
 }
 
fs/nfs/nfs4xdr.c +5 -1
index 0b2d051990e99..3cd04c98da6bc 100644
@@ -4258,7 +4258,11 @@ static int decode_attr_security_label(struct xdr_stream *xdr, uint32_t *bitmap,
 			goto out_overflow;
 		if (len < NFS4_MAXLABELLEN) {
 			if (label) {
-				memcpy(label->label, p, len);
+				if (label->len) {
+					if (label->len < len)
+						return -ERANGE;
+					memcpy(label->label, p, len);
+				}
 				label->len = len;
 				label->pi = pi;
 				label->lfs = lfs;
Signature · 1 line
2.25.1
author maintainer
#213 lore raw

PATCH 212/228 net: qcom/emac: add missed clk_disable_unprepare in error path of emac_clks_phase1_init

In reply to Greg Kroah-Hartman

From: Wang Hai <[email protected]>

[ Upstream commit 50caa777a3a24d7027748e96265728ce748b41ef ]

Fix the missing clk_disable_unprepare() before return from emac_clks_phase1_init() in the error handling case.

Fixes b9b17debc69d ("net: emac: emac gigabit ethernet controller driver")
---
 drivers/net/ethernet/qualcomm/emac/emac.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)
drivers/net/ethernet/qualcomm/emac/emac.c +14 -3
index 759543512117c..5ab83751a471f 100644
@@ -493,13 +493,24 @@ static int emac_clks_phase1_init(struct platform_device *pdev,
 
 	ret = clk_prepare_enable(adpt->clk[EMAC_CLK_CFG_AHB]);
 	if (ret)
-		return ret;
+		goto disable_clk_axi;
 
 	ret = clk_set_rate(adpt->clk[EMAC_CLK_HIGH_SPEED], 19200000);
 	if (ret)
-		return ret;
+		goto disable_clk_cfg_ahb;
+
+	ret = clk_prepare_enable(adpt->clk[EMAC_CLK_HIGH_SPEED]);
+	if (ret)
+		goto disable_clk_cfg_ahb;
 
-	return clk_prepare_enable(adpt->clk[EMAC_CLK_HIGH_SPEED]);
+	return 0;
+
+disable_clk_cfg_ahb:
+	clk_disable_unprepare(adpt->clk[EMAC_CLK_CFG_AHB]);
+disable_clk_axi:
+	clk_disable_unprepare(adpt->clk[EMAC_CLK_AXI]);
+
+	return ret;
 }
 
 /* Enable clocks; needs emac_clks_phase1_init to be called before */
Signature · 1 line
2.25.1
author maintainer
#211 lore raw

PATCH 210/228 drm/vmwgfx: Use correct vmw_legacy_display_unit pointer

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 1d2c0c565bc0da25f5e899a862fb58e612b222df ]

The "entry" pointer is an offset from the list head and it doesn't point to a valid vmw_legacy_display_unit struct. Presumably the intent was to point to the last entry.

Also the "i++" wasn't used so I have removed that as well.

Fixes d7e1958dbe4a ("drm/vmwgfx: Support older hardware.")
---
 drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c +2 -3
index 3824595fece12..39f4ad0dab8db 100644
@@ -79,7 +79,7 @@ static int vmw_ldu_commit_list(struct vmw_private *dev_priv)
 	struct vmw_legacy_display_unit *entry;
 	struct drm_framebuffer *fb = NULL;
 	struct drm_crtc *crtc = NULL;
-	int i = 0;
+	int i;
 
 	/* If there is no display topology the host just assumes
 	 * that the guest will set the same layout as the host.
@@ -90,12 +90,11 @@ static int vmw_ldu_commit_list(struct vmw_private *dev_priv)
 			crtc = &entry->base.crtc;
 			w = max(w, crtc->x + crtc->mode.hdisplay);
 			h = max(h, crtc->y + crtc->mode.vdisplay);
-			i++;
 		}
 
 		if (crtc == NULL)
 			return 0;
-		fb = entry->base.crtc.primary->state->fb;
+		fb = crtc->primary->state->fb;
 
 		return vmw_kms_write_svga(dev_priv, w, h, fb->pitches[0],
 					  fb->format->cpp[0] * 8,
Signature · 1 line
2.25.1
author maintainer
#212 lore raw

PATCH 211/228 drm/vmwgfx: Fix two list_for_each loop exit tests

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 4437c1152ce0e57ab8f401aa696ea6291cc07ab1 ]

These if statements are supposed to be true if we ended the list_for_each_entry() loops without hitting a break statement but they don't work.

In the first loop, we increment "i" after the "if (i == unit)" condition so we don't necessarily know that "i" is not equal to unit at the end of the loop.

In the second loop we exit when mode is not pointing to a valid drm_display_mode struct so it doesn't make sense to check "mode->type".

Fixes a278724aa23c ("drm/vmwgfx: Implement fbdev on kms v2")
---
 drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +4 -4
index 11f1c30ead548..848c9d009be2a 100644
@@ -2707,7 +2707,7 @@ int vmw_kms_fbdev_init_data(struct vmw_private *dev_priv,
 		++i;
 	}
 
-	if (i != unit) {
+	if (&con->head == &dev_priv->dev->mode_config.connector_list) {
 		DRM_ERROR("Could not find initial display unit.\n");
 		return -EINVAL;
 	}
@@ -2729,13 +2729,13 @@ int vmw_kms_fbdev_init_data(struct vmw_private *dev_priv,
 			break;
 	}
 
-	if (mode->type & DRM_MODE_TYPE_PREFERRED)
-		*p_mode = mode;
-	else {
+	if (&mode->head == &con->modes) {
 		WARN_ONCE(true, "Could not find initial preferred mode.\n");
 		*p_mode = list_first_entry(&con->modes,
 					   struct drm_display_mode,
 					   head);
+	} else {
+		*p_mode = mode;
 	}
 
 	return 0;
Signature · 1 line
2.25.1
author maintainer
#210 lore raw

PATCH 209/228 Input: sentelic - fix error return when fsp_reg_write fails

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit ea38f06e0291986eb93beb6d61fd413607a30ca4 ]

Currently when the call to fsp_reg_write fails -EIO is not being returned because the count is being returned instead of the return value in retval. Fix this by returning the value in retval instead of count.

Addresses-Coverity: ("Unused value")

Fixes fc69f4a6af49 ("Input: add new driver for Sentelic Finger Sensing Pad")
---
 drivers/input/mouse/sentelic.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/input/mouse/sentelic.c +1 -1
index 11c32ac8234b2..779d0b9341c0d 100644
@@ -454,7 +454,7 @@ static ssize_t fsp_attr_set_setreg(struct psmouse *psmouse, void *data,
 
 	fsp_reg_write_enable(psmouse, false);
 
-	return count;
+	return retval;
 }
 
 PSMOUSE_DEFINE_WO_ATTR(setreg, S_IWUSR, NULL, fsp_attr_set_setreg);
Signature · 1 line
2.25.1
author maintainer
#207 lore raw

PATCH 206/228 pwm: bcm-iproc: handle clk_get_rate() return

In reply to Greg Kroah-Hartman

From: Rayagonda Kokatanur <[email protected]>

[ Upstream commit 6ced5ff0be8e94871ba846dfbddf69d21363f3d7 ]

Handle clk_get_rate() returning 0 to avoid possible division by zero.

Fixes daa5abc41c80 ("pwm: Add support for Broadcom iProc PWM controller")
---
 drivers/pwm/pwm-bcm-iproc.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/pwm/pwm-bcm-iproc.c +7 -2
index 31b01035d0ab3..8cfba3614e601 100644
@@ -85,8 +85,6 @@ static void iproc_pwmc_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
 	u64 tmp, multi, rate;
 	u32 value, prescale;
 
-	rate = clk_get_rate(ip->clk);
-
 	value = readl(ip->base + IPROC_PWM_CTRL_OFFSET);
 
 	if (value & BIT(IPROC_PWM_CTRL_EN_SHIFT(pwm->hwpwm)))
@@ -99,6 +97,13 @@ static void iproc_pwmc_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
 	else
 		state->polarity = PWM_POLARITY_INVERSED;
 
+	rate = clk_get_rate(ip->clk);
+	if (rate == 0) {
+		state->period = 0;
+		state->duty_cycle = 0;
+		return;
+	}
+
 	value = readl(ip->base + IPROC_PWM_PRESCALE_OFFSET);
 	prescale = value >> IPROC_PWM_PRESCALE_SHIFT(pwm->hwpwm);
 	prescale &= IPROC_PWM_PRESCALE_MAX;
Signature · 1 line
2.25.1
author maintainer
#205 lore raw

PATCH 204/228 i2c: rcar: slave: only send STOP event when we have been addressed

In reply to Greg Kroah-Hartman

From: Wolfram Sang <[email protected]>

[ Upstream commit 314139f9f0abdba61ed9a8463bbcb0bf900ac5a2 ]

When the SSR interrupt is activated, it will detect every STOP condition on the bus, not only the ones after we have been addressed. So, enable this interrupt only after we have been addressed, and disable it otherwise.

Fixes de20d1857dd6 ("i2c: rcar: add slave support")
---
 drivers/i2c/busses/i2c-rcar.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/i2c/busses/i2c-rcar.c +4 -3
index db9ca8e926ca7..07305304712e1 100644
@@ -538,13 +538,14 @@ static bool rcar_i2c_slave_irq(struct rcar_i2c_priv *priv)
 			rcar_i2c_write(priv, ICSIER, SDR | SSR | SAR);
 		}
 
-		rcar_i2c_write(priv, ICSSR, ~SAR & 0xff);
+		/* Clear SSR, too, because of old STOPs to other clients than us */
+		rcar_i2c_write(priv, ICSSR, ~(SAR | SSR) & 0xff);
 	}
 
 	/* master sent stop */
 	if (ssr_filtered & SSR) {
 		i2c_slave_event(priv->slave, I2C_SLAVE_STOP, &value);
-		rcar_i2c_write(priv, ICSIER, SAR | SSR);
+		rcar_i2c_write(priv, ICSIER, SAR);
 		rcar_i2c_write(priv, ICSSR, ~SSR & 0xff);
 	}
 
@@ -802,7 +803,7 @@ static int rcar_reg_slave(struct i2c_client *slave)
 	priv->slave = slave;
 	rcar_i2c_write(priv, ICSAR, slave->addr);
 	rcar_i2c_write(priv, ICSSR, 0);
-	rcar_i2c_write(priv, ICSIER, SAR | SSR);
+	rcar_i2c_write(priv, ICSIER, SAR);
 	rcar_i2c_write(priv, ICSCR, SIE | SDBS);
 
 	return 0;
Signature · 1 line
2.25.1
author maintainer
#206 lore raw

PATCH 205/228 clk: clk-atlas6: fix return value check in atlas6_clk_init()

In reply to Greg Kroah-Hartman

From: Xu Wang <[email protected]>

[ Upstream commit 12b90b40854a8461a02ef19f6f4474cc88d64b66 ]

In case of error, the function clk_register() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR().

Fixes 7bf21bc81f28 ("clk: sirf: re-arch to make the codes support both prima2 and atlas6")
---
 drivers/clk/sirf/clk-atlas6.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/sirf/clk-atlas6.c +1 -1
index 665fa681b2e1e..1e6bdf22c3b64 100644
@@ -136,7 +136,7 @@ static void __init atlas6_clk_init(struct device_node *np)
 
 	for (i = pll1; i < maxclk; i++) {
 		atlas6_clks[i] = clk_register(NULL, atlas6_clk_hw_array[i]);
-		BUG_ON(!atlas6_clks[i]);
+		BUG_ON(IS_ERR(atlas6_clks[i]));
 	}
 	clk_register_clkdev(atlas6_clks[cpu], NULL, "cpu");
 	clk_register_clkdev(atlas6_clks[io],  NULL, "io");
Signature · 1 line
2.25.1
author maintainer
#186 lore raw

PATCH 186/228 kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler

In reply to Greg Kroah-Hartman

From: Muchun Song <[email protected]>

commit 0cb2f1372baa60af8456388a574af6133edd7d80 upstream.

We found a case of kernel panic on our server. The stack trace is as follows(omit some irrelevant information):

  BUG: kernel NULL pointer dereference, address: 0000000000000080
  RIP: 0010:kprobe_ftrace_handler+0x5e/0xe0
  RSP: 0018:ffffb512c6550998 EFLAGS: 00010282
  RAX: 0000000000000000 RBX: ffff8e9d16eea018 RCX: 0000000000000000
  RDX: ffffffffbe1179c0 RSI: ffffffffc0535564 RDI: ffffffffc0534ec0
  RBP: ffffffffc0534ec1 R08: ffff8e9d1bbb0f00 R09: 0000000000000004
  R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
  R13: ffff8e9d1f797060 R14: 000000000000bacc R15: ffff8e9ce13eca00
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000080 CR3: 00000008453d0005 CR4: 00000000003606e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   <IRQ>
   ftrace_ops_assist_func+0x56/0xe0
   ftrace_call+0x5/0x34
   tcpa_statistic_send+0x5/0x130 [ttcp_engine]

The tcpa_statistic_send is the function being kprobed. After analysis, the root cause is that the fourth parameter regs of kprobe_ftrace_handler is NULL. Why regs is NULL? We use the crash tool to analyze the kdump.

crash> dis tcpa_statistic_send -r

         <tcpa_statistic_send>: callq 0xffffffffbd8018c0 <ftrace_caller>

The tcpa_statistic_send calls ftrace_caller instead of ftrace_regs_caller. So it is reasonable that the fourth parameter regs of kprobe_ftrace_handler is NULL. In theory, we should call the ftrace_regs_caller instead of the ftrace_caller. After in-depth analysis, we found a reproducible path.

Writing a simple kernel module which starts a periodic timer. The timer's handler is named 'kprobe_test_timer_handler'. The module name is kprobe_test.ko.

1) insmod kprobe_test.ko
2) bpftrace -e 'kretprobe:kprobe_test_timer_handler {}'
3) echo 0 > /proc/sys/kernel/ftrace_enabled
4) rmmod kprobe_test
5) stop step 2) kprobe
6) insmod kprobe_test.ko
7) bpftrace -e 'kretprobe:kprobe_test_timer_handler {}'

We mark the kprobe as GONE but not disarm the kprobe in the step 4). The step 5) also do not disarm the kprobe when unregister kprobe. So we do not remove the ip from the filter. In this case, when the module loads again in the step 6), we will replace the code to ftrace_caller via the ftrace_module_enable(). When we register kprobe again, we will not replace ftrace_caller to ftrace_regs_caller because the ftrace is disabled in the step 3). So the step 7) will trigger kernel panic. Fix this problem by disarming the kprobe when the module is going away.

---
 kernel/kprobes.c |    7 +++++++
 1 file changed, 7 insertions(+)
kernel/kprobes.c +7 -0
@@ -2134,6 +2134,13 @@ static void kill_kprobe(struct kprobe *p
 	 * the original probed function (which will be freed soon) any more.
 	 */
 	arch_remove_kprobe(p);
+
+	/*
+	 * The module is going away. We should disarm the kprobe which
+	 * is using ftrace.
+	 */
+	if (kprobe_ftrace(p))
+		disarm_kprobe_ftrace(p);
 }
 
 /* Disable one kprobe */
author maintainer
#208 lore raw

PATCH 207/228 tools build feature: Use CC and CXX from parent

In reply to Greg Kroah-Hartman

From: Thomas Hebb <[email protected]>

[ Upstream commit e3232c2f39acafd5a29128425bc30b9884642cfa ]

commit c8c188679ccf ("tools build: Use the same CC for feature detection and actual build") changed these assignments from unconditional (:=) to conditional (?=) so that they wouldn't clobber values from the environment. However, conditional assignment does not work properly for variables that Make implicitly sets, among which are CC and CXX. To quote tools/scripts/Makefile.include, which handles this properly:

# Makefiles suck: This macro sets a default value of $(2) for the

  # variable named by $(1), unless the variable has been set by
  # environment or command line. This is necessary for CC and AR
  # because make sets default values, so the simpler ?= approach
  # won't work as expected.

In other words, the conditional assignments will not run even if the variables are not overridden in the environment; Make will set CC to "cc" and CXX to "g++" when it starts[1], meaning the variables are not empty by the time the conditional assignments are evaluated. This breaks cross-compilation when CROSS_COMPILE is set but CC isn't, since "cc" gets used for feature detection instead of the cross compiler (and likewise for CXX).

To fix the issue, just pass down the values of CC and CXX computed by the parent Makefile, which gets included by the Makefile that actually builds whatever we're detecting features for and so is guaranteed to have good values. This is a better solution anyway, since it means we aren't trying to replicate the logic of the parent build system and so don't risk it getting out of sync.

Leave PKG_CONFIG alone, since 1) there's no common logic to compute it in Makefile.include, and 2) it's not an implicit variable, so conditional assignment works properly.

[1] https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html

Fixes c8c188679ccf ("tools build: Use the same CC for feature detection and actual build")
Cc David Carrillo-Cisneros <[email protected]>
Cc Ian Rogers <[email protected]>
Cc Igor Lubashev <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Quentin Monnet <[email protected]>
Cc Song Liu <[email protected]>
Cc Stephane Eranian <[email protected]>
Cc thomas hebb <[email protected]>
---
 tools/build/Makefile.feature | 2 +-
 tools/build/feature/Makefile | 2 --
 2 files changed, 1 insertion(+), 3 deletions(-)
tools/build/Makefile.feature +1 -1
index c71a05b9c984f..a2389f0c0b1c0 100644
@@ -7,7 +7,7 @@ endif
 
 feature_check = $(eval $(feature_check_code))
 define feature_check_code
-  feature-$(1) := $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS) $(FEATURE_CHECK_CFLAGS-$(1))" CXXFLAGS="$(EXTRA_CXXFLAGS) $(FEATURE_CHECK_CXXFLAGS-$(1))" LDFLAGS="$(LDFLAGS) $(FEATURE_CHECK_LDFLAGS-$(1))" -C $(feature_dir) $(OUTPUT_FEATURES)test-$1.bin >/dev/null 2>/dev/null && echo 1 || echo 0)
+  feature-$(1) := $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CC=$(CC) CXX=$(CXX) CFLAGS="$(EXTRA_CFLAGS) $(FEATURE_CHECK_CFLAGS-$(1))" CXXFLAGS="$(EXTRA_CXXFLAGS) $(FEATURE_CHECK_CXXFLAGS-$(1))" LDFLAGS="$(LDFLAGS) $(FEATURE_CHECK_LDFLAGS-$(1))" -C $(feature_dir) $(OUTPUT_FEATURES)test-$1.bin >/dev/null 2>/dev/null && echo 1 || echo 0)
 endef
 
 feature_set = $(eval $(feature_set_code))
tools/build/feature/Makefile +0 -2
index 96982640fbf88..26316749e594a 100644
@@ -55,8 +55,6 @@ FILES=                                          \
 
 FILES := $(addprefix $(OUTPUT),$(FILES))
 
-CC ?= $(CROSS_COMPILE)gcc
-CXX ?= $(CROSS_COMPILE)g++
 PKG_CONFIG ?= $(CROSS_COMPILE)pkg-config
 LLVM_CONFIG ?= llvm-config
 
Signature · 1 line
2.25.1
author maintainer
#204 lore raw

PATCH 203/228 iommu/vt-d: Enforce PASID devTLB field mask

In reply to Greg Kroah-Hartman

From: Liu Yi L <[email protected]>

[ Upstream commit 5f77d6ca5ca74e4b4a5e2e010f7ff50c45dea326 ]

Set proper masks to avoid invalid input spillover to reserved bits.

---
 include/linux/intel-iommu.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
include/linux/intel-iommu.h +2 -2
index 4def15c32a018..d2364ba99f6ce 100644
@@ -304,8 +304,8 @@ enum {
 
 #define QI_DEV_EIOTLB_ADDR(a)	((u64)(a) & VTD_PAGE_MASK)
 #define QI_DEV_EIOTLB_SIZE	(((u64)1) << 11)
-#define QI_DEV_EIOTLB_GLOB(g)	((u64)g)
-#define QI_DEV_EIOTLB_PASID(p)	(((u64)p) << 32)
+#define QI_DEV_EIOTLB_GLOB(g)	((u64)(g) & 0x1)
+#define QI_DEV_EIOTLB_PASID(p)	((u64)((p) & 0xfffff) << 32)
 #define QI_DEV_EIOTLB_SID(sid)	((u64)((sid) & 0xffff) << 16)
 #define QI_DEV_EIOTLB_QDEP(qd)	((u64)((qd) & 0x1f) << 4)
 #define QI_DEV_EIOTLB_PFSID(pfsid) (((u64)(pfsid & 0xf) << 12) | \
Signature · 1 line
2.25.1
author maintainer
#202 lore raw

PATCH 201/228 dm rq: dont call blk_mq_queue_stopped() in dm_stop_queue()

In reply to Greg Kroah-Hartman

From: Ming Lei <[email protected]>

[ Upstream commit e766668c6cd49d741cfb49eaeb38998ba34d27bc ]

dm_stop_queue() only uses blk_mq_quiesce_queue() so it doesn't formally stop the blk-mq queue; therefore there is no point making the blk_mq_queue_stopped() check -- it will never be stopped.

In addition, even though dm_stop_queue() actually tries to quiesce hw queues via blk_mq_quiesce_queue(), checking with blk_queue_quiesced() to avoid unnecessary queue quiesce isn't reliable because: the QUEUE_FLAG_QUIESCED flag is set before synchronize_rcu() and dm_stop_queue() may be called when synchronize_rcu() from another blk_mq_quiesce_queue() is in-progress.

Fixes 7b17c2f7292ba ("dm: Fix a race condition related to stopping and starting queues")
---
 drivers/md/dm-rq.c | 3 ---
 1 file changed, 3 deletions(-)
drivers/md/dm-rq.c +0 -3
index eadfcfd106fff..cac8ec16e6031 100644
@@ -95,9 +95,6 @@ static void dm_old_stop_queue(struct request_queue *q)
 
 static void dm_mq_stop_queue(struct request_queue *q)
 {
-	if (blk_mq_queue_stopped(q))
-		return;
-
 	blk_mq_quiesce_queue(q);
 }
 
Signature · 1 line
2.25.1
author maintainer
#201 lore raw

PATCH 200/228 gpu: ipu-v3: image-convert: Combine rotate/no-rotate irq handlers

In reply to Greg Kroah-Hartman

From: Steve Longerbeam <[email protected]>

[ Upstream commit 0f6245f42ce9b7e4d20f2cda8d5f12b55a44d7d1 ]

Combine the rotate_irq() and norotate_irq() handlers into a single eof_irq() handler.

---
 drivers/gpu/ipu-v3/ipu-image-convert.c | 58 +++++++++-----------------
 1 file changed, 20 insertions(+), 38 deletions(-)
drivers/gpu/ipu-v3/ipu-image-convert.c +20 -38
index a5e33d58e02f7..d2f9e65522676 100644
@@ -992,9 +992,10 @@ static irqreturn_t do_irq(struct ipu_image_convert_run *run)
 	return IRQ_WAKE_THREAD;
 }
 
-static irqreturn_t norotate_irq(int irq, void *data)
+static irqreturn_t eof_irq(int irq, void *data)
 {
 	struct ipu_image_convert_chan *chan = data;
+	struct ipu_image_convert_priv *priv = chan->priv;
 	struct ipu_image_convert_ctx *ctx;
 	struct ipu_image_convert_run *run;
 	unsigned long flags;
@@ -1011,45 +1012,26 @@ static irqreturn_t norotate_irq(int irq, void *data)
 
 	ctx = run->ctx;
 
-	if (ipu_rot_mode_is_irt(ctx->rot_mode)) {
-		/* this is a rotation operation, just ignore */
-		spin_unlock_irqrestore(&chan->irqlock, flags);
-		return IRQ_HANDLED;
-	}
-
-	ret = do_irq(run);
-out:
-	spin_unlock_irqrestore(&chan->irqlock, flags);
-	return ret;
-}
-
-static irqreturn_t rotate_irq(int irq, void *data)
-{
-	struct ipu_image_convert_chan *chan = data;
-	struct ipu_image_convert_priv *priv = chan->priv;
-	struct ipu_image_convert_ctx *ctx;
-	struct ipu_image_convert_run *run;
-	unsigned long flags;
-	irqreturn_t ret;
-
-	spin_lock_irqsave(&chan->irqlock, flags);
-
-	/* get current run and its context */
-	run = chan->current_run;
-	if (!run) {
+	if (irq == chan->out_eof_irq) {
+		if (ipu_rot_mode_is_irt(ctx->rot_mode)) {
+			/* this is a rotation op, just ignore */
+			ret = IRQ_HANDLED;
+			goto out;
+		}
+	} else if (irq == chan->rot_out_eof_irq) {
+		if (!ipu_rot_mode_is_irt(ctx->rot_mode)) {
+			/* this was NOT a rotation op, shouldn't happen */
+			dev_err(priv->ipu->dev,
+				"Unexpected rotation interrupt\n");
+			ret = IRQ_HANDLED;
+			goto out;
+		}
+	} else {
+		dev_err(priv->ipu->dev, "Received unknown irq %d\n", irq);
 		ret = IRQ_NONE;
 		goto out;
 	}
 
-	ctx = run->ctx;
-
-	if (!ipu_rot_mode_is_irt(ctx->rot_mode)) {
-		/* this was NOT a rotation operation, shouldn't happen */
-		dev_err(priv->ipu->dev, "Unexpected rotation interrupt\n");
-		spin_unlock_irqrestore(&chan->irqlock, flags);
-		return IRQ_HANDLED;
-	}
-
 	ret = do_irq(run);
 out:
 	spin_unlock_irqrestore(&chan->irqlock, flags);
@@ -1142,7 +1124,7 @@ static int get_ipu_resources(struct ipu_image_convert_chan *chan)
 						  chan->out_chan,
 						  IPU_IRQ_EOF);
 
-	ret = request_threaded_irq(chan->out_eof_irq, norotate_irq, do_bh,
+	ret = request_threaded_irq(chan->out_eof_irq, eof_irq, do_bh,
 				   0, "ipu-ic", chan);
 	if (ret < 0) {
 		dev_err(priv->ipu->dev, "could not acquire irq %d\n",
@@ -1155,7 +1137,7 @@ static int get_ipu_resources(struct ipu_image_convert_chan *chan)
 						     chan->rotation_out_chan,
 						     IPU_IRQ_EOF);
 
-	ret = request_threaded_irq(chan->rot_out_eof_irq, rotate_irq, do_bh,
+	ret = request_threaded_irq(chan->rot_out_eof_irq, eof_irq, do_bh,
 				   0, "ipu-ic", chan);
 	if (ret < 0) {
 		dev_err(priv->ipu->dev, "could not acquire irq %d\n",
Signature · 1 line
2.25.1
author maintainer
#200 lore raw

PATCH 199/228 USB: serial: ftdi_sio: fix break and sysrq handling

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

[ Upstream commit 733fff67941dad64b8a630450b8372b1873edc41 ]

Only the last NUL in a packet should be flagged as a break character, for example, to avoid dropping unrelated characters when IGNBRK is set.

Also make sysrq work by consuming the break character instead of having it immediately cancel the sysrq request, and by not processing it prematurely to avoid triggering a sysrq based on an unrelated character received in the same packet (which was received *before* the break).

Note that the break flag can be left set also for a packet received immediately following a break and that and an ending NUL in such a packet will continue to be reported as a break as there's no good way to tell it apart from an actual break.

Tested on FT232R and FT232H.

Fixes 72fda3ca6fc1 ("USB: serial: ftd_sio: implement sysrq handling on break")
Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 drivers/usb/serial/ftdi_sio.c | 24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)
drivers/usb/serial/ftdi_sio.c +17 -7
index 8abb30c797d30..0574bf03b3171 100644
@@ -2045,6 +2045,7 @@ static int ftdi_process_packet(struct usb_serial_port *port,
 		struct ftdi_private *priv, unsigned char *buf, int len)
 {
 	unsigned char status;
+	bool brkint = false;
 	int i;
 	char flag;
 
@@ -2096,13 +2097,17 @@ static int ftdi_process_packet(struct usb_serial_port *port,
 	 */
 	flag = TTY_NORMAL;
 	if (buf[1] & FTDI_RS_ERR_MASK) {
-		/* Break takes precedence over parity, which takes precedence
-		 * over framing errors */
-		if (buf[1] & FTDI_RS_BI) {
-			flag = TTY_BREAK;
+		/*
+		 * Break takes precedence over parity, which takes precedence
+		 * over framing errors. Note that break is only associated
+		 * with the last character in the buffer and only when it's a
+		 * NUL.
+		 */
+		if (buf[1] & FTDI_RS_BI && buf[len - 1] == '\0') {
 			port->icount.brk++;
-			usb_serial_handle_break(port);
-		} else if (buf[1] & FTDI_RS_PE) {
+			brkint = true;
+		}
+		if (buf[1] & FTDI_RS_PE) {
 			flag = TTY_PARITY;
 			port->icount.parity++;
 		} else if (buf[1] & FTDI_RS_FE) {
@@ -2118,8 +2123,13 @@ static int ftdi_process_packet(struct usb_serial_port *port,
 
 	port->icount.rx += len - 2;
 
-	if (port->port.console && port->sysrq) {
+	if (brkint || (port->port.console && port->sysrq)) {
 		for (i = 2; i < len; i++) {
+			if (brkint && i == len - 1) {
+				if (usb_serial_handle_break(port))
+					return len - 3;
+				flag = TTY_BREAK;
+			}
 			if (usb_serial_handle_sysrq_char(port, buf[i]))
 				continue;
 			tty_insert_flip_char(&port->port, buf[i], flag);
Signature · 1 line
2.25.1
author maintainer
#199 lore raw

PATCH 198/228 USB: serial: ftdi_sio: clean up receive processing

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

[ Upstream commit ce054039ba5e47b75a3be02a00274e52b06a6456 ]

Clean up receive processing by dropping the character pointer and keeping the length argument unchanged throughout the function.

Also make it more apparent that sysrq processing can consume a characters by adding an explicit continue.

---
 drivers/usb/serial/ftdi_sio.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)
drivers/usb/serial/ftdi_sio.c +9 -10
index 4959fcac5e030..8abb30c797d30 100644
@@ -2045,7 +2045,6 @@ static int ftdi_process_packet(struct usb_serial_port *port,
 		struct ftdi_private *priv, unsigned char *buf, int len)
 {
 	unsigned char status;
-	unsigned char *ch;
 	int i;
 	char flag;
 
@@ -2088,8 +2087,7 @@ static int ftdi_process_packet(struct usb_serial_port *port,
 	else
 		priv->transmit_empty = 0;
 
-	len -= 2;
-	if (!len)
+	if (len == 2)
 		return 0;	/* status only */
 
 	/*
@@ -2118,19 +2116,20 @@ static int ftdi_process_packet(struct usb_serial_port *port,
 		}
 	}
 
-	port->icount.rx += len;
-	ch = buf + 2;
+	port->icount.rx += len - 2;
 
 	if (port->port.console && port->sysrq) {
-		for (i = 0; i < len; i++, ch++) {
-			if (!usb_serial_handle_sysrq_char(port, *ch))
-				tty_insert_flip_char(&port->port, *ch, flag);
+		for (i = 2; i < len; i++) {
+			if (usb_serial_handle_sysrq_char(port, buf[i]))
+				continue;
+			tty_insert_flip_char(&port->port, buf[i], flag);
 		}
 	} else {
-		tty_insert_flip_string_fixed_flag(&port->port, ch, flag, len);
+		tty_insert_flip_string_fixed_flag(&port->port, buf + 2, flag,
+				len - 2);
 	}
 
-	return len;
+	return len - 2;
 }
 
 static void ftdi_process_read_urb(struct urb *urb)
Signature · 1 line
2.25.1
author maintainer
#194 lore raw

PATCH 194/228 drm/imx: imx-ldb: Disable both channels for split mode in enc->disable()

In reply to Greg Kroah-Hartman

From: Liu Ying <[email protected]>

commit 3b2a999582c467d1883716b37ffcc00178a13713 upstream.

Both of the two LVDS channels should be disabled for split mode in the encoder's ->disable() callback, because they are enabled in the encoder's ->enable() callback.

Fixes 6556f7f82b9c ("drm: imx: Move imx-drm driver out of staging")
Cc Philipp Zabel <[email protected]>
Cc Sascha Hauer <[email protected]>
Cc Pengutronix Kernel Team <[email protected]>
Cc NXP Linux Team <[email protected]>
---
 drivers/gpu/drm/imx/imx-ldb.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/gpu/drm/imx/imx-ldb.c +4 -3
@@ -311,18 +311,19 @@ static void imx_ldb_encoder_disable(stru
 {
 	struct imx_ldb_channel *imx_ldb_ch = enc_to_imx_ldb_ch(encoder);
 	struct imx_ldb *ldb = imx_ldb_ch->ldb;
+	int dual = ldb->ldb_ctrl & LDB_SPLIT_MODE_EN;
 	int mux, ret;
 
 	drm_panel_disable(imx_ldb_ch->panel);
 
-	if (imx_ldb_ch == &ldb->channel[0])
+	if (imx_ldb_ch == &ldb->channel[0] || dual)
 		ldb->ldb_ctrl &= ~LDB_CH0_MODE_EN_MASK;
-	else if (imx_ldb_ch == &ldb->channel[1])
+	if (imx_ldb_ch == &ldb->channel[1] || dual)
 		ldb->ldb_ctrl &= ~LDB_CH1_MODE_EN_MASK;
 
 	regmap_write(ldb->regmap, IOMUXC_GPR2, ldb->ldb_ctrl);
 
-	if (ldb->ldb_ctrl & LDB_SPLIT_MODE_EN) {
+	if (dual) {
 		clk_disable_unprepare(ldb->clk[0]);
 		clk_disable_unprepare(ldb->clk[1]);
 	}
author maintainer
#159 lore raw

PATCH 159/228 mtd: rawnand: qcom: avoid write to unavailable register

In reply to Greg Kroah-Hartman

From: Sivaprakash Murugesan <[email protected]>

commit 443440cc4a901af462239d286cd10721aa1c7dfc upstream.

SFLASHC_BURST_CFG is only available on older ipq NAND platforms, this register has been removed when the NAND controller got implemented in the qpic controller.

Avoid writing this register on devices which are based on qpic NAND controller.

Fixes dce84760b09f ("mtd: nand: qcom: Support for IPQ8074 QPIC NAND controller")
---
 drivers/mtd/nand/qcom_nandc.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/mtd/nand/qcom_nandc.c +6 -1
@@ -435,11 +435,13 @@ struct qcom_nand_host {
  * among different NAND controllers.
  * @ecc_modes - ecc mode for NAND
  * @is_bam - whether NAND controller is using BAM
+ * @is_qpic - whether NAND CTRL is part of qpic IP
  * @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset
  */
 struct qcom_nandc_props {
 	u32 ecc_modes;
 	bool is_bam;
+	bool is_qpic;
 	u32 dev_cmd_reg_start;
 };
 
@@ -2508,7 +2510,8 @@ static int qcom_nandc_setup(struct qcom_
 	u32 nand_ctrl;
 
 	/* kill onenand */
-	nandc_write(nandc, SFLASHC_BURST_CFG, 0);
+	if (!nandc->props->is_qpic)
+		nandc_write(nandc, SFLASHC_BURST_CFG, 0);
 	nandc_write(nandc, dev_cmd_reg_addr(nandc, NAND_DEV_CMD_VLD),
 		    NAND_DEV_CMD_VLD_VAL);
 
@@ -2779,12 +2782,14 @@ static const struct qcom_nandc_props ipq
 static const struct qcom_nandc_props ipq4019_nandc_props = {
 	.ecc_modes = (ECC_BCH_4BIT | ECC_BCH_8BIT),
 	.is_bam = true,
+	.is_qpic = true,
 	.dev_cmd_reg_start = 0x0,
 };
 
 static const struct qcom_nandc_props ipq8074_nandc_props = {
 	.ecc_modes = (ECC_BCH_4BIT | ECC_BCH_8BIT),
 	.is_bam = true,
+	.is_qpic = true,
 	.dev_cmd_reg_start = 0x7000,
 };
 
author maintainer
#157 lore raw

PATCH 157/228 9p: Fix memory leak in v9fs_mount

In reply to Greg Kroah-Hartman

From: Zheng Bin <[email protected]>

commit cb0aae0e31c632c407a2cab4307be85a001d4d98 upstream.

v9fs_mount
v9fs_session_init

    v9fs_cache_session_get_cookie
      v9fs_random_cachetag                     -->alloc cachetag
      v9ses->fscache = fscache_acquire_cookie  -->maybe NULL
  sb = sget                                    -->fail, goto clunk
clunk_fid:
  v9fs_session_close
    if (v9ses->fscache)                        -->NULL
      kfree(v9ses->cachetag)

Thus memleak happens.

---
 fs/9p/v9fs.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
fs/9p/v9fs.c +2 -3
@@ -513,10 +513,9 @@ void v9fs_session_close(struct v9fs_sess
 	}
 
 #ifdef CONFIG_9P_FSCACHE
-	if (v9ses->fscache) {
+	if (v9ses->fscache)
 		v9fs_cache_session_put_cookie(v9ses);
-		kfree(v9ses->cachetag);
-	}
+	kfree(v9ses->cachetag);
 #endif
 	kfree(v9ses->uname);
 	kfree(v9ses->aname);
author maintainer
#155 lore raw

PATCH 155/228 fs/minix: reject too-large maximum file size

In reply to Greg Kroah-Hartman

From: Eric Biggers <[email protected]>

commit 270ef41094e9fa95273f288d7d785313ceab2ff3 upstream.

If the minix filesystem tries to map a very large logical block number to its on-disk location, block_to_path() can return offsets that are too large, causing out-of-bounds memory accesses when accessing indirect index blocks. This should be prevented by the check against the maximum file size, but this doesn't work because the maximum file size is read directly from the on-disk superblock and isn't validated itself.

Fix this by validating the maximum file size at mount time.

---
 fs/minix/inode.c |   22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)
fs/minix/inode.c +20 -2
@@ -155,6 +155,23 @@ static int minix_remount (struct super_b
 	return 0;
 }
 
+static bool minix_check_superblock(struct minix_sb_info *sbi)
+{
+	if (sbi->s_imap_blocks == 0 || sbi->s_zmap_blocks == 0)
+		return false;
+
+	/*
+	 * s_max_size must not exceed the block mapping limitation.  This check
+	 * is only needed for V1 filesystems, since V2/V3 support an extra level
+	 * of indirect blocks which places the limit well above U32_MAX.
+	 */
+	if (sbi->s_version == MINIX_V1 &&
+	    sbi->s_max_size > (7 + 512 + 512*512) * BLOCK_SIZE)
+		return false;
+
+	return true;
+}
+
 static int minix_fill_super(struct super_block *s, void *data, int silent)
 {
 	struct buffer_head *bh;
@@ -233,11 +250,12 @@ static int minix_fill_super(struct super
 	} else
 		goto out_no_fs;
 
+	if (!minix_check_superblock(sbi))
+		goto out_illegal_sb;
+
 	/*
 	 * Allocate the buffer map to keep the superblock small.
 	 */
-	if (sbi->s_imap_blocks == 0 || sbi->s_zmap_blocks == 0)
-		goto out_illegal_sb;
 	i = (sbi->s_imap_blocks + sbi->s_zmap_blocks) * sizeof(bh);
 	map = kzalloc(i, GFP_KERNEL);
 	if (!map)
author maintainer
#182 lore raw

PATCH 182/228 MIPS: CPU#0 is not hotpluggable

In reply to Greg Kroah-Hartman

From: Huacai Chen <[email protected]>

commit 9cce844abf07b683cff5f0273977d5f8d0af94c7 upstream.

Now CPU#0 is not hotpluggable on MIPS, so prevent to create /sys/devices /system/cpu/cpu0/online which confuses some user-space tools.

---
 arch/mips/kernel/topology.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/mips/kernel/topology.c +1 -1
@@ -20,7 +20,7 @@ static int __init topology_init(void)
 	for_each_present_cpu(i) {
 		struct cpu *c = &per_cpu(cpu_devices, i);
 
-		c->hotpluggable = 1;
+		c->hotpluggable = !!i;
 		ret = register_cpu(c, i);
 		if (ret)
 			printk(KERN_WARNING "topology_init: register_cpu %d "
author maintainer
#171 lore raw

PATCH 171/228 btrfs: fix memory leaks after failure to lookup checksums during inode logging

In reply to Greg Kroah-Hartman

From: Filipe Manana <[email protected]>

commit 4f26433e9b3eb7a55ed70d8f882ae9cd48ba448b upstream.

While logging an inode, at copy_items(), if we fail to lookup the checksums for an extent we release the destination path, free the ins_data array and then return immediately. However a previous iteration of the for loop may have added checksums to the ordered_sums list, in which case we leak the memory used by them.

So fix this by making sure we iterate the ordered_sums list and free all its checksums before returning.

Fixes 3650860b90cc2a ("Btrfs: remove almost all of the BUG()'s from tree-log.c")
---
 fs/btrfs/tree-log.c |    8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)
fs/btrfs/tree-log.c +2 -6
@@ -3854,11 +3854,8 @@ static noinline int copy_items(struct bt
 						fs_info->csum_root,
 						ds + cs, ds + cs + cl - 1,
 						&ordered_sums, 0);
-				if (ret) {
-					btrfs_release_path(dst_path);
-					kfree(ins_data);
-					return ret;
-				}
+				if (ret)
+					break;
 			}
 		}
 	}
@@ -3871,7 +3868,6 @@ static noinline int copy_items(struct bt
 	 * we have to do this after the loop above to avoid changing the
 	 * log tree while trying to change the log tree.
 	 */
-	ret = 0;
 	while (!list_empty(&ordered_sums)) {
 		struct btrfs_ordered_sum *sums = list_entry(ordered_sums.next,
 						   struct btrfs_ordered_sum,
author maintainer
#180 lore raw

PATCH 180/228 bcache: allocate meta data pages as compound pages

In reply to Greg Kroah-Hartman

From: Coly Li <[email protected]>

commit 5fe48867856367142d91a82f2cbf7a57a24cbb70 upstream.

There are some meta data of bcache are allocated by multiple pages, and they are used as bio bv_page for I/Os to the cache device. for example cache_set->uuids, cache->disk_buckets, journal_write->data, bset_tree->data.

For such meta data memory, all the allocated pages should be treated as a single memory block. Then the memory management and underlying I/O code can treat them more clearly.

This patch adds __GFP_COMP flag to all the location allocating >0 order pages for the above mentioned meta data. Then their pages are treated as compound pages now.

---
 drivers/md/bcache/bset.c    |    2 +-
 drivers/md/bcache/btree.c   |    2 +-
 drivers/md/bcache/journal.c |    4 ++--
 drivers/md/bcache/super.c   |    2 +-
 4 files changed, 5 insertions(+), 5 deletions(-)
drivers/md/bcache/bset.c +1 -1
@@ -319,7 +319,7 @@ int bch_btree_keys_alloc(struct btree_ke
 
 	b->page_order = page_order;
 
-	t->data = (void *) __get_free_pages(gfp, b->page_order);
+	t->data = (void *) __get_free_pages(__GFP_COMP|gfp, b->page_order);
 	if (!t->data)
 		goto err;
 
drivers/md/bcache/btree.c +1 -1
@@ -794,7 +794,7 @@ int bch_btree_cache_alloc(struct cache_s
 	mutex_init(&c->verify_lock);
 
 	c->verify_ondisk = (void *)
-		__get_free_pages(GFP_KERNEL, ilog2(bucket_pages(c)));
+		__get_free_pages(GFP_KERNEL|__GFP_COMP, ilog2(bucket_pages(c)));
 
 	c->verify_data = mca_bucket_alloc(c, &ZERO_KEY, GFP_KERNEL);
 
drivers/md/bcache/journal.c +2 -2
@@ -838,8 +838,8 @@ int bch_journal_alloc(struct cache_set *
 	j->w[1].c = c;
 
 	if (!(init_fifo(&j->pin, JOURNAL_PIN, GFP_KERNEL)) ||
-	    !(j->w[0].data = (void *) __get_free_pages(GFP_KERNEL, JSET_BITS)) ||
-	    !(j->w[1].data = (void *) __get_free_pages(GFP_KERNEL, JSET_BITS)))
+	    !(j->w[0].data = (void *) __get_free_pages(GFP_KERNEL|__GFP_COMP, JSET_BITS)) ||
+	    !(j->w[1].data = (void *) __get_free_pages(GFP_KERNEL|__GFP_COMP, JSET_BITS)))
 		return -ENOMEM;
 
 	return 0;
drivers/md/bcache/super.c +1 -1
@@ -1468,7 +1468,7 @@ void bch_cache_set_unregister(struct cac
 }
 
 #define alloc_bucket_pages(gfp, c)			\
-	((void *) __get_free_pages(__GFP_ZERO|gfp, ilog2(bucket_pages(c))))
+	((void *) __get_free_pages(__GFP_ZERO|__GFP_COMP|gfp, ilog2(bucket_pages(c))))
 
 struct cache_set *bch_cache_set_alloc(struct cache_sb *sb)
 {
author maintainer
#166 lore raw

PATCH 166/228 net: initialize fastreuse on inet_inherit_port

In reply to Greg Kroah-Hartman

From: Tim Froidcoeur <[email protected]>

commit d76f3351cea2d927fdf70dd7c06898235035e84e upstream.

In the case of TPROXY, bind_conflict optimizations for SO_REUSEADDR or SO_REUSEPORT are broken, possibly resulting in O(n) instead of O(1) bind behaviour or in the incorrect reuse of a bind.

the kernel keeps track for each bind_bucket if all sockets in the bind_bucket support SO_REUSEADDR or SO_REUSEPORT in two fastreuse flags. These flags allow skipping the costly bind_conflict check when possible (meaning when all sockets have the proper SO_REUSE option).

For every socket added to a bind_bucket, these flags need to be updated. As soon as a socket that does not support reuse is added, the flag is set to false and will never go back to true, unless the bind_bucket is deleted.

Note that there is no mechanism to re-evaluate these flags when a socket is removed (this might make sense when removing a socket that would not allow reuse; this leaves room for a future patch).

For this optimization to work, it is mandatory that these flags are properly initialized and updated.

When a child socket is created from a listen socket in __inet_inherit_port, the TPROXY case could create a new bind bucket without properly initializing these flags, thus preventing the optimization to work. Alternatively, a socket not allowing reuse could be added to an existing bind bucket without updating the flags, causing bind_conflict to never be called as it should.

Call inet_csk_update_fastreuse when __inet_inherit_port decides to create a new bind_bucket or use a different bind_bucket than the one of the listen socket.

Fixes 093d282321da ("tproxy: fix hash locking issue when using port redirection in __inet_inherit_port()")
---
 net/ipv4/inet_hashtables.c |    1 +
 1 file changed, 1 insertion(+)
net/ipv4/inet_hashtables.c +1 -0
@@ -160,6 +160,7 @@ int __inet_inherit_port(const struct soc
 				return -ENOMEM;
 			}
 		}
+		inet_csk_update_fastreuse(tb, child);
 	}
 	inet_bind_hash(child, tb, port);
 	spin_unlock(&head->lock);
author maintainer
#179 lore raw

PATCH 179/228 md/raid5: Fix Force reconstruct-write io stuck in degraded raid5

In reply to Greg Kroah-Hartman

From: ChangSyun Peng <[email protected]>

commit a1c6ae3d9f3dd6aa5981a332a6f700cf1c25edef upstream.

In degraded raid5, we need to read parity to do reconstruct-write when data disks fail. However, we can not read parity from handle_stripe_dirtying() in force reconstruct-write mode.

Reproducible Steps:

1. Create degraded raid5
mdadm -C /dev/md2 --assume-clean -l5 -n3 /dev/sda2 /dev/sdb2 missing
2. Set rmw_level to 0
echo 0 > /sys/block/md2/md/rmw_level
3. IO to raid5

Now some io may be stuck in raid5. We can use handle_stripe_fill() to read the parity in this situation.

---
 drivers/md/raid5.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/md/raid5.c +2 -1
@@ -3593,6 +3593,7 @@ static int need_this_block(struct stripe
 	 * is missing/faulty, then we need to read everything we can.
 	 */
 	if (sh->raid_conf->level != 6 &&
+	    sh->raid_conf->rmw_level != PARITY_DISABLE_RMW &&
 	    sh->sector < sh->raid_conf->mddev->recovery_cp)
 		/* reconstruct-write isn't being forced */
 		return 0;
@@ -4829,7 +4830,7 @@ static void handle_stripe(struct stripe_
 	 * or to load a block that is being partially written.
 	 */
 	if (s.to_read || s.non_overwrite
-	    || (conf->level == 6 && s.to_write && s.failed)
+	    || (s.to_write && s.failed)
 	    || (s.syncing && (s.uptodate + s.compute < disks))
 	    || s.replacing
 	    || s.expanding)
author maintainer
#177 lore raw

PATCH 177/228 net: stmmac: dwmac1000: provide multicast filter fallback

In reply to Greg Kroah-Hartman

From: Jonathan McDowell <[email protected]>

commit 592d751c1e174df5ff219946908b005eb48934b3 upstream.

If we don't have a hardware multicast filter available then instead of silently failing to listen for the requested ethernet broadcast addresses fall back to receiving all multicast packets, in a similar fashion to other drivers with no multicast filter.

---
 drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c |    3 +++
 1 file changed, 3 insertions(+)
drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c +3 -0
@@ -176,6 +176,9 @@ static void dwmac1000_set_filter(struct
 		value = GMAC_FRAME_FILTER_PR;
 	} else if (dev->flags & IFF_ALLMULTI) {
 		value = GMAC_FRAME_FILTER_PM;	/* pass all multi */
+	} else if (!netdev_mc_empty(dev) && (mcbitslog2 == 0)) {
+		/* Fall back to all multicast if we've no filter */
+		value = GMAC_FRAME_FILTER_PM;
 	} else if (!netdev_mc_empty(dev)) {
 		struct netdev_hw_addr *ha;
 
author maintainer
#178 lore raw

PATCH 178/228 net/compat: Add missing sock updates for SCM_RIGHTS

In reply to Greg Kroah-Hartman

From: Kees Cook <[email protected]>

commit d9539752d23283db4692384a634034f451261e29 upstream.

Add missed sock updates to compat path via a new helper, which will be used more in coming patches. (The net/core/scm.c code is left as-is here to assist with -stable backports for the compat path.)

Cc Christoph Hellwig <[email protected]>
Cc Sargun Dhillon <[email protected]>
Cc Jakub Kicinski <[email protected]>
Fixes 48a87cc26c13 ("net: netprio: fd passed in SCM_RIGHTS datagram not set correctly")
Fixes d84295067fc7 ("net: net_cls: fd passed in SCM_RIGHTS datagram not set correctly")
---
 include/net/sock.h |    4 ++++
 net/compat.c       |    1 +
 net/core/sock.c    |   21 +++++++++++++++++++++
 3 files changed, 26 insertions(+)
include/net/sock.h +4 -0
@@ -816,6 +816,8 @@ static inline int sk_memalloc_socks(void
 {
 	return static_key_false(&memalloc_socks);
 }
+
+void __receive_sock(struct file *file);
 #else
 
 static inline int sk_memalloc_socks(void)
@@ -823,6 +825,8 @@ static inline int sk_memalloc_socks(void
 	return 0;
 }
 
+static inline void __receive_sock(struct file *file)
+{ }
 #endif
 
 static inline gfp_t sk_gfp_mask(const struct sock *sk, gfp_t gfp_mask)
net/compat.c +1 -0
@@ -289,6 +289,7 @@ void scm_detach_fds_compat(struct msghdr
 			break;
 		}
 		/* Bump the usage count and install the file. */
+		__receive_sock(fp[i]);
 		fd_install(new_fd, get_file(fp[i]));
 	}
 
net/core/sock.c +21 -0
@@ -2563,6 +2563,27 @@ int sock_no_mmap(struct file *file, stru
 }
 EXPORT_SYMBOL(sock_no_mmap);
 
+/*
+ * When a file is received (via SCM_RIGHTS, etc), we must bump the
+ * various sock-based usage counts.
+ */
+void __receive_sock(struct file *file)
+{
+	struct socket *sock;
+	int error;
+
+	/*
+	 * The resulting value of "error" is ignored here since we only
+	 * need to take action when the file is a socket and testing
+	 * "sock" for NULL is sufficient.
+	 */
+	sock = sock_from_file(file, &error);
+	if (sock) {
+		sock_update_netprioidx(&sock->sk->sk_cgrp_data);
+		sock_update_classid(&sock->sk->sk_cgrp_data);
+	}
+}
+
 ssize_t sock_no_sendpage(struct socket *sock, struct page *page, int offset, size_t size, int flags)
 {
 	ssize_t res;
author maintainer
#176 lore raw

PATCH 176/228 net: ethernet: stmmac: Disable hardware multicast filter

In reply to Greg Kroah-Hartman

From: Jonathan McDowell <[email protected]>

commit df43dd526e6609769ae513a81443c7aa727c8ca3 upstream.

The IPQ806x does not appear to have a functional multicast ethernet address filter. This was observed as a failure to correctly receive IPv6 packets on a LAN to the all stations address. Checking the vendor driver shows that it does not attempt to enable the multicast filter and instead falls back to receiving all multicast packets, internally setting ALLMULTI.

Use the new fallback support in the dwmac1000 driver to correctly achieve the same with the mainline IPQ806x driver. Confirmed to fix IPv6 functionality on an RB3011 router.

---
 drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c |    1 +
 1 file changed, 1 insertion(+)
drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c +1 -0
@@ -362,6 +362,7 @@ static int ipq806x_gmac_probe(struct pla
 	plat_dat->has_gmac = true;
 	plat_dat->bsp_priv = gmac;
 	plat_dat->fix_mac_speed = ipq806x_gmac_fix_mac_speed;
+	plat_dat->multicast_filter_bins = 0;
 
 	err = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
 	if (err)
author maintainer
#175 lore raw

PATCH 175/228 powerpc: Fix circular dependency between percpu.h and mmu.h

In reply to Greg Kroah-Hartman

From: Michael Ellerman <[email protected]>

commit 0c83b277ada72b585e6a3e52b067669df15bcedb upstream.

Recently random.h started including percpu.h (see commit f227e3ec3b5c ("random32: update the net random state on interrupt and activity")), which broke corenet64_smp_defconfig:

In file included from /linux/arch/powerpc/include/asm/paca.h:18,

                   from /linux/arch/powerpc/include/asm/percpu.h:13,
                   from /linux/include/linux/random.h:14,
                   from /linux/lib/uuid.c:14:
  /linux/arch/powerpc/include/asm/mmu.h:139:22: error: unknown type name 'next_tlbcam_idx'
    139 | DECLARE_PER_CPU(int, next_tlbcam_idx);

This is due to a circular header dependency:
asm/mmu.h includes asm/percpu.h, which includes asm/paca.h, which includes asm/mmu.h

Which means DECLARE_PER_CPU() isn't defined when mmu.h needs it.

We can fix it by moving the include of paca.h below the include of asm-generic/percpu.h.

This moves the include of paca.h out of the #ifdef __powerpc64__, but that is OK because paca.h is almost entirely inside #ifdef CONFIG_PPC64 anyway.

It also moves the include of paca.h out of the #ifdef CONFIG_SMP, which could possibly break something, but seems to have no ill effects.

Fixes f227e3ec3b5c ("random32: update the net random state on interrupt and activity")
---
 arch/powerpc/include/asm/percpu.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/powerpc/include/asm/percpu.h +2 -2
@@ -10,8 +10,6 @@
 
 #ifdef CONFIG_SMP
 
-#include <asm/paca.h>
-
 #define __my_cpu_offset local_paca->data_offset
 
 #endif /* CONFIG_SMP */
@@ -19,4 +17,6 @@
 
 #include <asm-generic/percpu.h>
 
+#include <asm/paca.h>
+
 #endif /* _ASM_POWERPC_PERCPU_H_ */
author maintainer
#173 lore raw

PATCH 173/228 iio: dac: ad5592r: fix unbalanced mutex unlocks in ad5592r_read_raw()

In reply to Greg Kroah-Hartman

From: Alexandru Ardelean <[email protected]>

commit 65afb0932a81c1de719ceee0db0b276094b10ac8 upstream.

There are 2 exit paths where the lock isn't held, but try to unlock the mutex when exiting. In these places we should just return from the function.

A neater approach would be to cleanup the ad5592r_read_raw(), but that would make this patch more difficult to backport to stable versions.

Fixes 56ca9db862bf3: ("iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs")

---
 drivers/iio/dac/ad5592r-base.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/iio/dac/ad5592r-base.c +2 -2
@@ -417,7 +417,7 @@ static int ad5592r_read_raw(struct iio_d
 			s64 tmp = *val * (3767897513LL / 25LL);
 			*val = div_s64_rem(tmp, 1000000000LL, val2);
 
-			ret = IIO_VAL_INT_PLUS_MICRO;
+			return IIO_VAL_INT_PLUS_MICRO;
 		} else {
 			int mult;
 
@@ -448,7 +448,7 @@ static int ad5592r_read_raw(struct iio_d
 		ret =  IIO_VAL_INT;
 		break;
 	default:
-		ret = -EINVAL;
+		return -EINVAL;
 	}
 
 unlock:
author maintainer
#153 lore raw

PATCH 153/228 fs/minix: check return value of sb_getblk()

In reply to Greg Kroah-Hartman

From: Eric Biggers <[email protected]>

commit da27e0a0e5f655f0d58d4e153c3182bb2b290f64 upstream.

Patch series "fs/minix: fix syzbot bugs and set s_maxbytes".

This series fixes all syzbot bugs in the minix filesystem:

	KASAN: null-ptr-deref Write in get_block
	KASAN: use-after-free Write in get_block
	KASAN: use-after-free Read in get_block
	WARNING in inc_nlink
	KMSAN: uninit-value in get_block
	WARNING in drop_nlink

It also fixes the minix filesystem to set s_maxbytes correctly, so that userspace sees the correct behavior when exceeding the max file size.

This patch (of 6):

sb_getblk() can fail, so check its return value.

This fixes a NULL pointer dereference.

Originally from Qiujun Huang.

---
 fs/minix/itree_common.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
fs/minix/itree_common.c +7 -1
@@ -75,6 +75,7 @@ static int alloc_branch(struct inode *in
 	int n = 0;
 	int i;
 	int parent = minix_new_block(inode);
+	int err = -ENOSPC;
 
 	branch[0].key = cpu_to_block(parent);
 	if (parent) for (n = 1; n < num; n++) {
@@ -85,6 +86,11 @@ static int alloc_branch(struct inode *in
 			break;
 		branch[n].key = cpu_to_block(nr);
 		bh = sb_getblk(inode->i_sb, parent);
+		if (!bh) {
+			minix_free_block(inode, nr);
+			err = -ENOMEM;
+			break;
+		}
 		lock_buffer(bh);
 		memset(bh->b_data, 0, bh->b_size);
 		branch[n].bh = bh;
@@ -103,7 +109,7 @@ static int alloc_branch(struct inode *in
 		bforget(branch[i].bh);
 	for (i = 0; i < n; i++)
 		minix_free_block(inode, block_to_cpu(branch[i].key));
-	return -ENOSPC;
+	return err;
 }
 
 static inline int splice_branch(struct inode *inode,
author maintainer
#170 lore raw

PATCH 170/228 btrfs: only search for left_info if there is no right_info in try_merge_free_space

In reply to Greg Kroah-Hartman

From: Josef Bacik <[email protected]>

commit bf53d4687b8f3f6b752f091eb85f62369a515dfd upstream.

In try_to_merge_free_space we attempt to find entries to the left and right of the entry we are adding to see if they can be merged. We search for an entry past our current info (saved into right_info), and then if right_info exists and it has a rb_prev() we save the rb_prev() into left_info.

However there's a slight problem in the case that we have a right_info, but no entry previous to that entry. At that point we will search for an entry just before the info we're attempting to insert. This will simply find right_info again, and assign it to left_info, making them both the same pointer.

Now if right_info _can_ be merged with the range we're inserting, we'll add it to the info and free right_info. However further down we'll access left_info, which was right_info, and thus get a use-after-free.

Fix this by only searching for the left entry if we don't find a right entry at all.

The CVE referenced had a specially crafted file system that could trigger this use-after-free. However with the tree checker improvements we no longer trigger the conditions for the UAF. But the original conditions still apply, hence this fix.

Reference: CVE-2019-19448

Fixes 963030817060 ("Btrfs: use hybrid extents+bitmap rb tree for free space")
---
 fs/btrfs/free-space-cache.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
fs/btrfs/free-space-cache.c +2 -2
@@ -2169,7 +2169,7 @@ out:
 static bool try_merge_free_space(struct btrfs_free_space_ctl *ctl,
 			  struct btrfs_free_space *info, bool update_stat)
 {
-	struct btrfs_free_space *left_info;
+	struct btrfs_free_space *left_info = NULL;
 	struct btrfs_free_space *right_info;
 	bool merged = false;
 	u64 offset = info->offset;
@@ -2184,7 +2184,7 @@ static bool try_merge_free_space(struct
 	if (right_info && rb_prev(&right_info->offset_index))
 		left_info = rb_entry(rb_prev(&right_info->offset_index),
 				     struct btrfs_free_space, offset_index);
-	else
+	else if (!right_info)
 		left_info = tree_search_offset(ctl, offset - 1, 0, 0);
 
 	if (right_info && !right_info->bitmap) {
author maintainer
#163 lore raw

PATCH 163/228 irqdomain/treewide: Free firmware node after domain removal

In reply to Greg Kroah-Hartman

From: Jon Derrick <[email protected]>

commit ec0160891e387f4771f953b888b1fe951398e5d9 upstream.

Commit 711419e504eb ("irqdomain: Add the missing assignment of domain->fwnode for named fwnode") unintentionally caused a dangling pointer page fault issue on firmware nodes that were freed after IRQ domain allocation. Commit e3beca48a45b fixed that dangling pointer issue by only freeing the firmware node after an IRQ domain allocation failure. That fix no longer frees the firmware node immediately, but leaves the firmware node allocated after the domain is removed.

The firmware node must be kept around through irq_domain_remove, but should be freed it afterwards.

Add the missing free operations after domain removal where where appropriate.

---
 arch/x86/kernel/apic/io_apic.c      |    5 +++++
 drivers/iommu/intel_irq_remapping.c |    8 ++++++++
 drivers/pci/host/vmd.c              |    3 +++
 3 files changed, 16 insertions(+)
arch/x86/kernel/apic/io_apic.c +5 -0
@@ -2252,8 +2252,13 @@ static int mp_irqdomain_create(int ioapi
 
 static void ioapic_destroy_irqdomain(int idx)
 {
+	struct ioapic_domain_cfg *cfg = &ioapics[idx].irqdomain_cfg;
+	struct fwnode_handle *fn = ioapics[idx].irqdomain->fwnode;
+
 	if (ioapics[idx].irqdomain) {
 		irq_domain_remove(ioapics[idx].irqdomain);
+		if (!cfg->dev)
+			irq_domain_free_fwnode(fn);
 		ioapics[idx].irqdomain = NULL;
 	}
 }
drivers/iommu/intel_irq_remapping.c +8 -0
@@ -601,13 +601,21 @@ out_free_table:
 
 static void intel_teardown_irq_remapping(struct intel_iommu *iommu)
 {
+	struct fwnode_handle *fn;
+
 	if (iommu && iommu->ir_table) {
 		if (iommu->ir_msi_domain) {
+			fn = iommu->ir_msi_domain->fwnode;
+
 			irq_domain_remove(iommu->ir_msi_domain);
+			irq_domain_free_fwnode(fn);
 			iommu->ir_msi_domain = NULL;
 		}
 		if (iommu->ir_domain) {
+			fn = iommu->ir_domain->fwnode;
+
 			irq_domain_remove(iommu->ir_domain);
+			irq_domain_free_fwnode(fn);
 			iommu->ir_domain = NULL;
 		}
 		free_pages((unsigned long)iommu->ir_table->base,
drivers/pci/host/vmd.c +3 -0
@@ -651,6 +651,7 @@ static int vmd_enable_domain(struct vmd_
 	if (!vmd->bus) {
 		pci_free_resource_list(&resources);
 		irq_domain_remove(vmd->irq_domain);
+		irq_domain_free_fwnode(fn);
 		return -ENODEV;
 	}
 
@@ -753,6 +754,7 @@ static void vmd_cleanup_srcu(struct vmd_
 static void vmd_remove(struct pci_dev *dev)
 {
 	struct vmd_dev *vmd = pci_get_drvdata(dev);
+	struct fwnode_handle *fn = vmd->irq_domain->fwnode;
 
 	sysfs_remove_link(&vmd->dev->dev.kobj, "domain");
 	pci_stop_root_bus(vmd->bus);
@@ -761,6 +763,7 @@ static void vmd_remove(struct pci_dev *d
 	vmd_teardown_dma_ops(vmd);
 	vmd_detach_resources(vmd);
 	irq_domain_remove(vmd->irq_domain);
+	irq_domain_free_fwnode(fn);
 }
 
 #ifdef CONFIG_PM_SLEEP
author maintainer
#165 lore raw

PATCH 165/228 xen/balloon: make the balloon wait interruptible

In reply to Greg Kroah-Hartman

From: Roger Pau Monne <[email protected]>

commit 88a479ff6ef8af7f07e11593d58befc644244ff7 upstream.

So it can be killed, or else processes can get hung indefinitely waiting for balloon pages.

---
 drivers/xen/balloon.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/xen/balloon.c +4 -2
@@ -633,11 +633,13 @@ static int add_ballooned_pages(int nr_pa
 	if (xen_hotplug_unpopulated) {
 		st = reserve_additional_memory();
 		if (st != BP_ECANCELED) {
+			int rc;
+
 			mutex_unlock(&balloon_mutex);
-			wait_event(balloon_wq,
+			rc = wait_event_interruptible(balloon_wq,
 				   !list_empty(&ballooned_pages));
 			mutex_lock(&balloon_mutex);
-			return 0;
+			return rc ? -ENOMEM : 0;
 		}
 	}
 
author maintainer
#161 lore raw

PATCH 161/228 parisc: mask out enable and reserved bits from sba imask

In reply to Greg Kroah-Hartman

From: Sven Schnelle <[email protected]>

commit 5b24993c21cbf2de11aff077a48c5cb0505a0450 upstream.

When using kexec the SBA IOMMU IBASE might still have the RE bit set. This triggers a WARN_ON when trying to write back the IBASE register later, and it also makes some mask calculations fail.

---
 drivers/parisc/sba_iommu.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/parisc/sba_iommu.c +1 -1
@@ -1291,7 +1291,7 @@ sba_ioc_init_pluto(struct parisc_device
 	** (one that doesn't overlap memory or LMMIO space) in the
 	** IBASE and IMASK registers.
 	*/
-	ioc->ibase = READ_REG(ioc->ioc_hpa + IOC_IBASE);
+	ioc->ibase = READ_REG(ioc->ioc_hpa + IOC_IBASE) & ~0x1fffffULL;
 	iova_space_size = ~(READ_REG(ioc->ioc_hpa + IOC_IMASK) & 0xFFFFFFFFUL) + 1;
 
 	if ((ioc->ibase < 0xfed00000UL) && ((ioc->ibase + iova_space_size) > 0xfee00000UL)) {
author maintainer
#168 lore raw

PATCH 168/228 PCI: hotplug: ACPI: Fix context refcounting in acpiphp_grab_context()

In reply to Greg Kroah-Hartman

From: Rafael J. Wysocki <[email protected]>

commit dae68d7fd4930315389117e9da35b763f12238f9 upstream.

If context is not NULL in acpiphp_grab_context(), but the is_going_away flag is set for the device's parent, the reference counter of the context needs to be decremented before returning NULL or the context will never be freed, so make that happen.

Fixes edf5bf34d408 ("ACPI / dock: Use callback pointers from devices' ACPI hotplug contexts")
Cc 3.15+ <[email protected]> # 3.15+
---
 drivers/pci/hotplug/acpiphp_glue.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)
drivers/pci/hotplug/acpiphp_glue.c +11 -3
@@ -136,13 +136,21 @@ static struct acpiphp_context *acpiphp_g
 	struct acpiphp_context *context;
 
 	acpi_lock_hp_context();
+
 	context = acpiphp_get_context(adev);
-	if (!context || context->func.parent->is_going_away) {
-		acpi_unlock_hp_context();
-		return NULL;
+	if (!context)
+		goto unlock;
+
+	if (context->func.parent->is_going_away) {
+		acpiphp_put_context(context);
+		context = NULL;
+		goto unlock;
 	}
+
 	get_bridge(context->func.parent);
 	acpiphp_put_context(context);
+
+unlock:
 	acpi_unlock_hp_context();
 	return context;
 }
author maintainer
#127 lore raw

PATCH 127/228 net: ethernet: aquantia: Fix wrong return value

In reply to Greg Kroah-Hartman

From: Tianjia Zhang <[email protected]>

[ Upstream commit 0470a48880f8bc42ce26962b79c7b802c5a695ec ]

In function hw_atl_a0_hw_multicast_list_set(), when an invalid request is encountered, a negative error code should be returned.

Fixes bab6de8fd180b ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions")
Cc David VomLehn <[email protected]>
---
 drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c +1 -1
index b83ee74d28391..77e5c69268146 100644
@@ -746,7 +746,7 @@ static int hw_atl_a0_hw_multicast_list_set(struct aq_hw_s *self,
 	int err = 0;
 
 	if (count > (HW_ATL_A0_MAC_MAX - HW_ATL_A0_MAC_MIN)) {
-		err = EBADRQC;
+		err = -EBADRQC;
 		goto err_exit;
 	}
 	for (self->aq_nic_cfg->mc_list_count = 0U;
Signature · 1 line
2.25.1
author maintainer
#167 lore raw

PATCH 167/228 smb3: warn on confusing error scenario with sec=krb5

In reply to Greg Kroah-Hartman

From: Steve French <[email protected]>

commit 0a018944eee913962bce8ffebbb121960d5125d9 upstream.

When mounting with Kerberos, users have been confused about the default error returned in scenarios in which either keyutils is not installed or the user did not properly acquire a krb5 ticket. Log a warning message in the case that "ENOKEY" is returned from the get_spnego_key upcall so that users can better understand why mount failed in those two cases.

---
 fs/cifs/smb2pdu.c |    2 ++
 1 file changed, 2 insertions(+)
fs/cifs/smb2pdu.c +2 -0
@@ -942,6 +942,8 @@ SMB2_auth_kerberos(struct SMB2_sess_data
 	spnego_key = cifs_get_spnego_key(ses);
 	if (IS_ERR(spnego_key)) {
 		rc = PTR_ERR(spnego_key);
+		if (rc == -ENOKEY)
+			cifs_dbg(VFS, "Verify user has a krb5 ticket and keyutils is installed\n");
 		spnego_key = NULL;
 		goto out;
 	}
author maintainer
#152 lore raw

PATCH 152/228 bitfield.h: dont compile-time validate _val in FIELD_FIT

In reply to Greg Kroah-Hartman

From: Jakub Kicinski <[email protected]>

commit 444da3f52407d74c9aa12187ac6b01f76ee47d62 upstream.

When ur_load_imm_any() is inlined into jeq_imm(), it's possible for the compiler to deduce a case where _val can only have the value of -1 at compile time. Specifically,

/* struct bpf_insn: _s32 imm */
u64 imm = insn->imm; /* sign extend */
if (imm >> 32) { /* non-zero only if insn->imm is negative */
/* inlined from ur_load_imm_any */
u32 __imm = imm >> 32; /* therefore, always 0xffffffff */ if (__builtin_constant_p(__imm) && __imm > 255)
compiletime_assert_XXX()

This can result in tripping a BUILD_BUG_ON() in __BF_FIELD_CHECK() that checks that a given value is representable in one byte (interpreted as unsigned).

FIELD_FIT() should return true or false at runtime for whether a value can fit for not. Don't break the build over a value that's too large for the mask. We'd prefer to keep the inlining and compiler optimizations though we know this case will always return false.

---
 include/linux/bitfield.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/linux/bitfield.h +1 -1
@@ -71,7 +71,7 @@
  */
 #define FIELD_FIT(_mask, _val)						\
 	({								\
-		__BF_FIELD_CHECK(_mask, 0ULL, _val, "FIELD_FIT: ");	\
+		__BF_FIELD_CHECK(_mask, 0ULL, 0ULL, "FIELD_FIT: ");	\
 		!((((typeof(_mask))_val) << __bf_shf(_mask)) & ~(_mask)); \
 	})
 
author maintainer
#118 lore raw

PATCH 118/228 Smack: prevent underflow in smk_set_cipso()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 42a2df3e829f3c5562090391b33714b2e2e5ad4a ]

We have an upper bound on "maplevel" but forgot to check for negative values.

Fixes e114e473771c ("Smack: Simplified Mandatory Access Control Kernel")
---
 security/smack/smackfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
security/smack/smackfs.c +1 -1
index 981f582539acf..accd3846f1e3e 100644
@@ -912,7 +912,7 @@ static ssize_t smk_set_cipso(struct file *file, const char __user *buf,
 	}
 
 	ret = sscanf(rule, "%d", &maplevel);
-	if (ret != 1 || maplevel > SMACK_CIPSO_MAXLEVEL)
+	if (ret != 1 || maplevel < 0 || maplevel > SMACK_CIPSO_MAXLEVEL)
 		goto out;
 
 	rule += SMK_DIGITLEN;
Signature · 1 line
2.25.1
author maintainer
#123 lore raw

PATCH 123/228 selftests/powerpc: Fix online CPU selection

In reply to Greg Kroah-Hartman

From: Sandipan Das <[email protected]>

[ Upstream commit dfa03fff86027e58c8dba5c03ae68150d4e513ad ]

The size of the CPU affinity mask must be large enough for systems with a very large number of CPUs. Otherwise, tests which try to determine the first online CPU by calling sched_getaffinity() will fail. This makes sure that the size of the allocated affinity mask is dependent on the number of CPUs as reported by get_nprocs_conf().

---
 tools/testing/selftests/powerpc/utils.c | 37 +++++++++++++++++--------
 1 file changed, 25 insertions(+), 12 deletions(-)
tools/testing/selftests/powerpc/utils.c +25 -12
index d46916867a6fb..77db4f6ecf2f0 100644
@@ -12,6 +12,7 @@
 #include <sched.h>
 #include <stdio.h>
 #include <sys/stat.h>
+#include <sys/sysinfo.h>
 #include <sys/types.h>
 #include <unistd.h>
 
@@ -81,26 +82,38 @@ void *get_auxv_entry(int type)
 
 int pick_online_cpu(void)
 {
-	cpu_set_t mask;
-	int cpu;
+	int ncpus, cpu = -1;
+	cpu_set_t *mask;
+	size_t size;
+
+	ncpus = get_nprocs_conf();
+	size = CPU_ALLOC_SIZE(ncpus);
+	mask = CPU_ALLOC(ncpus);
+	if (!mask) {
+		perror("malloc");
+		return -1;
+	}
 
-	CPU_ZERO(&mask);
+	CPU_ZERO_S(size, mask);
 
-	if (sched_getaffinity(0, sizeof(mask), &mask)) {
+	if (sched_getaffinity(0, size, mask)) {
 		perror("sched_getaffinity");
-		return -1;
+		goto done;
 	}
 
 	/* We prefer a primary thread, but skip 0 */
-	for (cpu = 8; cpu < CPU_SETSIZE; cpu += 8)
-		if (CPU_ISSET(cpu, &mask))
-			return cpu;
+	for (cpu = 8; cpu < ncpus; cpu += 8)
+		if (CPU_ISSET_S(cpu, size, mask))
+			goto done;
 
 	/* Search for anything, but in reverse */
-	for (cpu = CPU_SETSIZE - 1; cpu >= 0; cpu--)
-		if (CPU_ISSET(cpu, &mask))
-			return cpu;
+	for (cpu = ncpus - 1; cpu >= 0; cpu--)
+		if (CPU_ISSET_S(cpu, size, mask))
+			goto done;
 
 	printf("No cpus in affinity mask?!\n");
-	return -1;
+
+done:
+	CPU_FREE(mask);
+	return cpu;
 }
Signature · 1 line
2.25.1
author maintainer
#144 lore raw

PATCH 144/228 USB: serial: cp210x: re-enable auto-RTS on open

In reply to Greg Kroah-Hartman

From: Brant Merryman <[email protected]>

commit c7614ff9b73a1e6fb2b1b51396da132ed22fecdb upstream.

CP210x hardware disables auto-RTS but leaves auto-CTS when in hardware flow control mode and UART on cp210x hardware is disabled. When re-opening the port, if auto-CTS is enabled on the cp210x, then auto-RTS must be re-enabled in the driver.

[ johan: fix up tags and problem description ]
Fixes 39a66b8d22a3 ("[PATCH] USB: CP2101 Add support for flow control")
Cc stable <[email protected]> # 2.6.12
---
 drivers/usb/serial/cp210x.c |   17 +++++++++++++++++
 1 file changed, 17 insertions(+)
drivers/usb/serial/cp210x.c +17 -0
@@ -925,6 +925,7 @@ static void cp210x_get_termios_port(stru
 	u32 baud;
 	u16 bits;
 	u32 ctl_hs;
+	u32 flow_repl;
 
 	cp210x_read_u32_reg(port, CP210X_GET_BAUDRATE, &baud);
 
@@ -1025,6 +1026,22 @@ static void cp210x_get_termios_port(stru
 	ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake);
 	if (ctl_hs & CP210X_SERIAL_CTS_HANDSHAKE) {
 		dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__);
+		/*
+		 * When the port is closed, the CP210x hardware disables
+		 * auto-RTS and RTS is deasserted but it leaves auto-CTS when
+		 * in hardware flow control mode. When re-opening the port, if
+		 * auto-CTS is enabled on the cp210x, then auto-RTS must be
+		 * re-enabled in the driver.
+		 */
+		flow_repl = le32_to_cpu(flow_ctl.ulFlowReplace);
+		flow_repl &= ~CP210X_SERIAL_RTS_MASK;
+		flow_repl |= CP210X_SERIAL_RTS_SHIFT(CP210X_SERIAL_RTS_FLOW_CTL);
+		flow_ctl.ulFlowReplace = cpu_to_le32(flow_repl);
+		cp210x_write_reg_block(port,
+				CP210X_SET_FLOW,
+				&flow_ctl,
+				sizeof(flow_ctl));
+
 		cflag |= CRTSCTS;
 	} else {
 		dev_dbg(dev, "%s - flow control = NONE\n", __func__);
author maintainer
#149 lore raw

PATCH 149/228 crypto: qat - fix double free in qat_uclo_create_batch_init_list

In reply to Greg Kroah-Hartman

From: Tom Rix <[email protected]>

commit c06c76602e03bde24ee69a2022a829127e504202 upstream.

clang static analysis flags this error

qat_uclo.c:297:3: warning: Attempt to free released memory
[unix.Malloc]

                kfree(*init_tab_base);
                ^~~~~~~~~~~~~~~~~~~~~

When input *init_tab_base is null, the function allocates memory for the head of the list. When there is problem allocating other list elements the list is unwound and freed. Then a check is made if the list head was allocated and is also freed.

Keeping track of the what may need to be freed is the variable 'tail_old'. The unwinding/freeing block is

	while (tail_old) {
		mem_init = tail_old->next;
		kfree(tail_old);
		tail_old = mem_init;
	}

The problem is that the first element of tail_old is also what was allocated for the list head

		init_header = kzalloc(sizeof(*init_header), GFP_KERNEL);
		...
		*init_tab_base = init_header;
		flag = 1;
	}
	tail_old = init_header;

So *init_tab_base/init_header are freed twice.

There is another problem.
When the input *init_tab_base is non null the tail_old is calculated by traveling down the list to first non null entry.

	tail_old = init_header;
	while (tail_old->next)
		tail_old = tail_old->next;

When the unwinding free happens, the last entry of the input list will be freed.

So the freeing needs a general changed.
If locally allocated the first element of tail_old is freed, else it is skipped. As a bit of cleanup, reset *init_tab_base if it came in as null.

Fixes b4b7e67c917f ("crypto: qat - Intel(R) QAT ucode part of fw loader")
---
 drivers/crypto/qat/qat_common/qat_uclo.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/crypto/qat/qat_common/qat_uclo.c +7 -2
@@ -332,13 +332,18 @@ static int qat_uclo_create_batch_init_li
 	}
 	return 0;
 out_err:
+	/* Do not free the list head unless we allocated it. */
+	tail_old = tail_old->next;
+	if (flag) {
+		kfree(*init_tab_base);
+		*init_tab_base = NULL;
+	}
+
 	while (tail_old) {
 		mem_init = tail_old->next;
 		kfree(tail_old);
 		tail_old = mem_init;
 	}
-	if (flag)
-		kfree(*init_tab_base);
 	return -ENOMEM;
 }
 
author maintainer
#148 lore raw

PATCH 148/228 ALSA: usb-audio: add quirk for Pioneer DDJ-RB

In reply to Greg Kroah-Hartman

From: Hector Martin <[email protected]>

commit 6e8596172ee1cd46ec0bfd5adcf4ff86371478b6 upstream.

This is just another Pioneer device with fixed endpoints. Input is dummy but used as feedback (it always returns silence).

---
 sound/usb/quirks-table.h |   56 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)
sound/usb/quirks-table.h +56 -0
@@ -3380,5 +3380,61 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge
 		}
 	}
 },
+{
+	/*
+	 * PIONEER DJ DDJ-RB
+	 * PCM is 4 channels out, 2 dummy channels in @ 44.1 fixed
+	 * The feedback for the output is the dummy input.
+	 */
+	USB_DEVICE_VENDOR_SPEC(0x2b73, 0x000e),
+	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_COMPOSITE,
+		.data = (const struct snd_usb_audio_quirk[]) {
+			{
+				.ifnum = 0,
+				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
+				.data = &(const struct audioformat) {
+					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
+					.channels = 4,
+					.iface = 0,
+					.altsetting = 1,
+					.altset_idx = 1,
+					.endpoint = 0x01,
+					.ep_attr = USB_ENDPOINT_XFER_ISOC|
+						   USB_ENDPOINT_SYNC_ASYNC,
+					.rates = SNDRV_PCM_RATE_44100,
+					.rate_min = 44100,
+					.rate_max = 44100,
+					.nr_rates = 1,
+					.rate_table = (unsigned int[]) { 44100 }
+				}
+			},
+			{
+				.ifnum = 0,
+				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
+				.data = &(const struct audioformat) {
+					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
+					.channels = 2,
+					.iface = 0,
+					.altsetting = 1,
+					.altset_idx = 1,
+					.endpoint = 0x82,
+					.ep_attr = USB_ENDPOINT_XFER_ISOC|
+						 USB_ENDPOINT_SYNC_ASYNC|
+						 USB_ENDPOINT_USAGE_IMPLICIT_FB,
+					.rates = SNDRV_PCM_RATE_44100,
+					.rate_min = 44100,
+					.rate_max = 44100,
+					.nr_rates = 1,
+					.rate_table = (unsigned int[]) { 44100 }
+				}
+			},
+			{
+				.ifnum = -1
+			}
+		}
+	}
+},
 
 #undef USB_DEVICE_VENDOR_SPEC
author maintainer
#147 lore raw

PATCH 147/228 ALSA: usb-audio: fix overeager device match for MacroSilicon MS2109

In reply to Greg Kroah-Hartman

From: Hector Martin <[email protected]>

commit 14a720dc1f5332f3bdf30a23a3bc549e81be974c upstream.

Matching by device matches all interfaces, which breaks the video/HID portions of the device depending on module load order.

Fixes e337bf19f6af ("ALSA: usb-audio: add quirk for MacroSilicon MS2109")
---
 sound/usb/quirks-table.h |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
sound/usb/quirks-table.h +7 -1
@@ -3335,7 +3335,13 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge
  * with.
  */
 {
-	USB_DEVICE(0x534d, 0x2109),
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
+		       USB_DEVICE_ID_MATCH_INT_CLASS |
+		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+	.idVendor = 0x534d,
+	.idProduct = 0x2109,
+	.bInterfaceClass = USB_CLASS_AUDIO,
+	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
 	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
 		.vendor_name = "MacroSilicon",
 		.product_name = "MS2109",
author maintainer
#121 lore raw

PATCH 121/228 selftests/powerpc: Fix CPU affinity for child process

In reply to Greg Kroah-Hartman

From: Harish <[email protected]>

[ Upstream commit 854eb5022be04f81e318765f089f41a57c8e5d83 ]

On systems with large number of cpus, test fails trying to set affinity by calling sched_setaffinity() with smaller size for affinity mask. This patch fixes it by making sure that the size of allocated affinity mask is dependent on the number of CPUs as reported by get_nprocs().

---
 .../powerpc/benchmarks/context_switch.c       | 21 ++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)
tools/testing/selftests/powerpc/benchmarks/context_switch.c +16 -5
index f4241339edd2a..7136eae2170b7 100644
@@ -22,6 +22,7 @@
 #include <limits.h>
 #include <sys/time.h>
 #include <sys/syscall.h>
+#include <sys/sysinfo.h>
 #include <sys/types.h>
 #include <sys/shm.h>
 #include <linux/futex.h>
@@ -97,8 +98,9 @@ static void start_thread_on(void *(*fn)(void *), void *arg, unsigned long cpu)
 
 static void start_process_on(void *(*fn)(void *), void *arg, unsigned long cpu)
 {
-	int pid;
-	cpu_set_t cpuset;
+	int pid, ncpus;
+	cpu_set_t *cpuset;
+	size_t size;
 
 	pid = fork();
 	if (pid == -1) {
@@ -109,14 +111,23 @@ static void start_process_on(void *(*fn)(void *), void *arg, unsigned long cpu)
 	if (pid)
 		return;
 
-	CPU_ZERO(&cpuset);
-	CPU_SET(cpu, &cpuset);
+	ncpus = get_nprocs();
+	size = CPU_ALLOC_SIZE(ncpus);
+	cpuset = CPU_ALLOC(ncpus);
+	if (!cpuset) {
+		perror("malloc");
+		exit(1);
+	}
+	CPU_ZERO_S(size, cpuset);
+	CPU_SET_S(cpu, size, cpuset);
 
-	if (sched_setaffinity(0, sizeof(cpuset), &cpuset)) {
+	if (sched_setaffinity(0, size, cpuset)) {
 		perror("sched_setaffinity");
+		CPU_FREE(cpuset);
 		exit(1);
 	}
 
+	CPU_FREE(cpuset);
 	fn(arg);
 
 	exit(0);
Signature · 1 line
2.25.1
author maintainer
#137 lore raw

PATCH 137/228 x86/fsgsbase/64: Fix NULL deref in 86_fsgsbase_read_task

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

[ Upstream commit 8ab49526b53d3172d1d8dd03a75c7d1f5bd21239 ]

syzbot found its way in 86_fsgsbase_read_task() and triggered this oops:

   KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
   CPU: 0 PID: 6866 Comm: syz-executor262 Not tainted 5.8.0-syzkaller #0
   RIP: 0010:x86_fsgsbase_read_task+0x16d/0x310 arch/x86/kernel/process_64.c:393
   Call Trace:
     putreg32+0x3ab/0x530 arch/x86/kernel/ptrace.c:876
     genregs32_set arch/x86/kernel/ptrace.c:1026 [inline]
     genregs32_set+0xa4/0x100 arch/x86/kernel/ptrace.c:1006
     copy_regset_from_user include/linux/regset.h:326 [inline]
     ia32_arch_ptrace arch/x86/kernel/ptrace.c:1061 [inline]
     compat_arch_ptrace+0x36c/0xd90 arch/x86/kernel/ptrace.c:1198
     __do_compat_sys_ptrace kernel/ptrace.c:1420 [inline]
     __se_compat_sys_ptrace kernel/ptrace.c:1389 [inline]
     __ia32_compat_sys_ptrace+0x220/0x2f0 kernel/ptrace.c:1389
     do_syscall_32_irqs_on arch/x86/entry/common.c:84 [inline]
     __do_fast_syscall_32+0x57/0x80 arch/x86/entry/common.c:126
     do_fast_syscall_32+0x2f/0x70 arch/x86/entry/common.c:149
     entry_SYSENTER_compat_after_hwframe+0x4d/0x5c

This can happen if ptrace() or sigreturn() pokes an LDT selector into FS or GS for a task with no LDT and something tries to read the base before a return to usermode notices the bad selector and fixes it.

The fix is to make sure ldt pointer is not NULL.

Fixes 07e1d88adaae ("x86/fsgsbase/64: Fix ptrace() to read the FS/GS base accurately")
Cc Chang S. Bae <[email protected]>
Cc Andy Lutomirski <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc Brian Gerst <[email protected]>
Cc Dave Hansen <[email protected]>
Cc Denys Vlasenko <[email protected]>
Cc H. Peter Anvin <[email protected]>
Cc Markus T Metzger <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Ravi Shankar <[email protected]>
Cc Rik van Riel <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Ingo Molnar <[email protected]>
---
 arch/x86/kernel/ptrace.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kernel/ptrace.c +1 -1
index 734549492a18b..dc4d27000aa35 100644
@@ -374,7 +374,7 @@ static unsigned long task_seg_base(struct task_struct *task,
 		 */
 		mutex_lock(&task->mm->context.lock);
 		ldt = task->mm->context.ldt;
-		if (unlikely(idx >= ldt->nr_entries))
+		if (unlikely(!ldt || idx >= ldt->nr_entries))
 			base = 0;
 		else
 			base = get_desc_base(ldt->entries + idx);
Signature · 1 line
2.25.1
author maintainer
#120 lore raw

PATCH 120/228 Bluetooth: hci_serdev: Only unregister device if it was registered

In reply to Greg Kroah-Hartman

From: Nicolas Boichat <[email protected]>

[ Upstream commit 202798db9570104728dce8bb57dfeed47ce764bc ]

We should not call hci_unregister_dev if the device was not successfully registered.

Fixes c34dc3bfa7642fd ("Bluetooth: hci_serdev: Introduce hci_uart_unregister_device()")
---
 drivers/bluetooth/hci_serdev.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/bluetooth/hci_serdev.c +2 -1
index 69c00a3db5382..72cf2d97b682c 100644
@@ -361,7 +361,8 @@ void hci_uart_unregister_device(struct hci_uart *hu)
 	struct hci_dev *hdev = hu->hdev;
 
 	clear_bit(HCI_UART_PROTO_READY, &hu->flags);
-	hci_unregister_dev(hdev);
+	if (test_bit(HCI_UART_REGISTERED, &hu->flags))
+		hci_unregister_dev(hdev);
 	hci_free_dev(hdev);
 
 	cancel_work_sync(&hu->write_work);
Signature · 1 line
2.25.1
author maintainer
#136 lore raw

PATCH 136/228 pinctrl-single: fix pcs_parse_pinconf() return value

In reply to Greg Kroah-Hartman

From: Drew Fustini <[email protected]>

[ Upstream commit f46fe79ff1b65692a65266a5bec6dbe2bf7fc70f ]

This patch causes pcs_parse_pinconf() to return -ENOTSUPP when no pinctrl_map is added. The current behavior is to return 0 when !PCS_HAS_PINCONF or !nconfs. Thus pcs_parse_one_pinctrl_entry() incorrectly assumes that a map was added and sets num_maps = 2.

Analysis:
=========
The function pcs_parse_one_pinctrl_entry() calls pcs_parse_pinconf() if PCS_HAS_PINCONF is enabled. The function pcs_parse_pinconf() returns 0 to indicate there was no error and num_maps is then set to 2:

980 static int pcs_parse_one_pinctrl_entry(struct pcs_device *pcs,

 981                                                 struct device_node *np,
 982                                                 struct pinctrl_map **map,
 983                                                 unsigned *num_maps,
 984                                                 const char **pgnames)
 985 {
<snip>
1053         (*map)->type = PIN_MAP_TYPE_MUX_GROUP;
1054         (*map)->data.mux.group = np->name;
1055         (*map)->data.mux.function = np->name;

1056
1057 if (PCS_HAS_PINCONF && function) {
1058 res = pcs_parse_pinconf(pcs, np, function, map);
1059 if (res)
1060 goto free_pingroups;
1061 *num_maps = 2;
1062 } else {
1063 *num_maps = 1;
1064 }

However, pcs_parse_pinconf() will also return 0 if !PCS_HAS_PINCONF or !nconfs. I believe these conditions should indicate that no map was added by returning -ENOTSUPP. Otherwise pcs_parse_one_pinctrl_entry() will set num_maps = 2 even though no maps were successfully added, as it does not reach "m++" on line 940:

895 static int pcs_parse_pinconf(struct pcs_device *pcs, struct device_node *np,
896 struct pcs_function *func,
897 struct pinctrl_map **map)
898
899 {
900 struct pinctrl_map *m = *map;
<snip>
917 /* If pinconf isn't supported, don't parse properties in below. */
918 if (!PCS_HAS_PINCONF)
919 return 0;
920
921 /* cacluate how much properties are supported in current node */
922 for (i = 0; i < ARRAY_SIZE(prop2); i++) {
923 if (of_find_property(np, prop2[i].name, NULL))
924 nconfs++;
925 }
926 for (i = 0; i < ARRAY_SIZE(prop4); i++) {
927 if (of_find_property(np, prop4[i].name, NULL))
928 nconfs++;
929 }
930 if (!nconfs)
919 return 0;
932
933 func->conf = devm_kcalloc(pcs->dev,
934 nconfs, sizeof(struct pcs_conf_vals),
935 GFP_KERNEL);
936 if (!func->conf)
937 return -ENOMEM;

 938         func->nconfs = nconfs;
 939         conf = &(func->conf[0]);
 940         m++;

This situtation will cause a boot failure [0] on the BeagleBone Black (AM3358) when am33xx_pinmux node in arch/arm/boot/dts/am33xx-l4.dtsi has compatible = "pinconf-single" instead of "pinctrl-single".

The patch fixes this issue by returning -ENOSUPP when !PCS_HAS_PINCONF or !nconfs, so that pcs_parse_one_pinctrl_entry() will know that no map was added.

Logic is also added to pcs_parse_one_pinctrl_entry() to distinguish between -ENOSUPP and other errors. In the case of -ENOSUPP, num_maps is set to 1 as it is valid for pinconf to be enabled and a given pin group to not any pinconf properties.

[0] https://lore.kernel.org/linux-omap/20200529175544.GA3766151@x1/

---
 drivers/pinctrl/pinctrl-single.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
drivers/pinctrl/pinctrl-single.c +7 -4
index b8b3d932cd73a..f751b5c3bf7e8 100644
@@ -888,7 +888,7 @@ static int pcs_parse_pinconf(struct pcs_device *pcs, struct device_node *np,
 
 	/* If pinconf isn't supported, don't parse properties in below. */
 	if (!PCS_HAS_PINCONF)
-		return 0;
+		return -ENOTSUPP;
 
 	/* cacluate how much properties are supported in current node */
 	for (i = 0; i < ARRAY_SIZE(prop2); i++) {
@@ -900,7 +900,7 @@ static int pcs_parse_pinconf(struct pcs_device *pcs, struct device_node *np,
 			nconfs++;
 	}
 	if (!nconfs)
-		return 0;
+		return -ENOTSUPP;
 
 	func->conf = devm_kzalloc(pcs->dev,
 				  sizeof(struct pcs_conf_vals) * nconfs,
@@ -1024,9 +1024,12 @@ static int pcs_parse_one_pinctrl_entry(struct pcs_device *pcs,
 
 	if (PCS_HAS_PINCONF) {
 		res = pcs_parse_pinconf(pcs, np, function, map);
-		if (res)
+		if (res == 0)
+			*num_maps = 2;
+		else if (res == -ENOTSUPP)
+			*num_maps = 1;
+		else
 			goto free_pingroups;
-		*num_maps = 2;
 	} else {
 		*num_maps = 1;
 	}
Signature · 1 line
2.25.1
author maintainer
#128 lore raw

PATCH 128/228 liquidio: Fix wrong return value in cn23xx_get_pf_num()

In reply to Greg Kroah-Hartman

From: Tianjia Zhang <[email protected]>

[ Upstream commit aa027850a292ea65524b8fab83eb91a124ad362c ]

On an error exit path, a negative error code should be returned instead of a positive return value.

Fixes 0c45d7fe12c7e ("liquidio: fix use of pf in pass-through mode in a virtual machine")
Cc Rick Farrington <[email protected]>
---
 drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c +1 -1
index 2e089b5ff8f32..30f0e54f658e9 100644
@@ -1167,7 +1167,7 @@ static int cn23xx_get_pf_num(struct octeon_device *oct)
 		oct->pf_num = ((fdl_bit >> CN23XX_PCIE_SRIOV_FDL_BIT_POS) &
 			       CN23XX_PCIE_SRIOV_FDL_MASK);
 	} else {
-		ret = EINVAL;
+		ret = -EINVAL;
 
 		/* Under some virtual environments, extended PCI regs are
 		 * inaccessible, in which case the above read will have failed.
Signature · 1 line
2.25.1
author maintainer
#133 lore raw

PATCH 133/228 fsl/fman: check dereferencing null pointer

In reply to Greg Kroah-Hartman

From: Florinel Iordache <[email protected]>

[ Upstream commit cc5d229a122106733a85c279d89d7703f21e4d4f ]

Add a safe check to avoid dereferencing null pointer

Fixes 57ba4c9b56d8 ("fsl/fman: Add FMan MAC support")
---
 drivers/net/ethernet/freescale/fman/fman_dtsec.c | 4 ++--
 drivers/net/ethernet/freescale/fman/fman_memac.c | 2 +-
 drivers/net/ethernet/freescale/fman/fman_tgec.c  | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)
drivers/net/ethernet/freescale/fman/fman_dtsec.c +2 -2
index 7af31ddd093f8..61238b3af2041 100644
@@ -1159,7 +1159,7 @@ int dtsec_del_hash_mac_address(struct fman_mac *dtsec, enet_addr_t *eth_addr)
 		list_for_each(pos,
 			      &dtsec->multicast_addr_hash->lsts[bucket]) {
 			hash_entry = ETH_HASH_ENTRY_OBJ(pos);
-			if (hash_entry->addr == addr) {
+			if (hash_entry && hash_entry->addr == addr) {
 				list_del_init(&hash_entry->node);
 				kfree(hash_entry);
 				break;
@@ -1172,7 +1172,7 @@ int dtsec_del_hash_mac_address(struct fman_mac *dtsec, enet_addr_t *eth_addr)
 		list_for_each(pos,
 			      &dtsec->unicast_addr_hash->lsts[bucket]) {
 			hash_entry = ETH_HASH_ENTRY_OBJ(pos);
-			if (hash_entry->addr == addr) {
+			if (hash_entry && hash_entry->addr == addr) {
 				list_del_init(&hash_entry->node);
 				kfree(hash_entry);
 				break;
drivers/net/ethernet/freescale/fman/fman_memac.c +1 -1
index 1fbeb991bcdf1..460f9e58e9877 100644
@@ -956,7 +956,7 @@ int memac_del_hash_mac_address(struct fman_mac *memac, enet_addr_t *eth_addr)
 
 	list_for_each(pos, &memac->multicast_addr_hash->lsts[hash]) {
 		hash_entry = ETH_HASH_ENTRY_OBJ(pos);
-		if (hash_entry->addr == addr) {
+		if (hash_entry && hash_entry->addr == addr) {
 			list_del_init(&hash_entry->node);
 			kfree(hash_entry);
 			break;
drivers/net/ethernet/freescale/fman/fman_tgec.c +1 -1
index e575259d20f40..c8ad9b8a75f8e 100644
@@ -585,7 +585,7 @@ int tgec_del_hash_mac_address(struct fman_mac *tgec, enet_addr_t *eth_addr)
 
 	list_for_each(pos, &tgec->multicast_addr_hash->lsts[hash]) {
 		hash_entry = ETH_HASH_ENTRY_OBJ(pos);
-		if (hash_entry->addr == addr) {
+		if (hash_entry && hash_entry->addr == addr) {
 			list_del_init(&hash_entry->node);
 			kfree(hash_entry);
 			break;
Signature · 1 line
2.25.1
author maintainer
#132 lore raw

PATCH 132/228 fsl/fman: fix unreachable code

In reply to Greg Kroah-Hartman

From: Florinel Iordache <[email protected]>

[ Upstream commit cc79fd8f557767de90ff199d3b6fb911df43160a ]

The parameter 'priority' is incorrectly forced to zero which ultimately induces logically dead code in the subsequent lines.

Fixes 57ba4c9b56d8 ("fsl/fman: Add FMan MAC support")
---
 drivers/net/ethernet/freescale/fman/fman_memac.c | 1 -
 1 file changed, 1 deletion(-)
drivers/net/ethernet/freescale/fman/fman_memac.c +0 -1
index b33650a897f18..1fbeb991bcdf1 100644
@@ -855,7 +855,6 @@ int memac_set_tx_pause_frames(struct fman_mac *memac, u8 priority,
 
 	tmp = ioread32be(&regs->command_config);
 	tmp &= ~CMD_CFG_PFC_MODE;
-	priority = 0;
 
 	iowrite32be(tmp, &regs->command_config);
 
Signature · 1 line
2.25.1
author maintainer
#130 lore raw

PATCH 130/228 fsl/fman: use 32-bit unsigned integer

In reply to Greg Kroah-Hartman

From: Florinel Iordache <[email protected]>

[ Upstream commit 99f47abd9f7bf6e365820d355dc98f6955a562df ]

Potentially overflowing expression (ts_freq << 16 and intgr << 16) declared as type u32 (32-bit unsigned) is evaluated using 32-bit arithmetic and then used in a context that expects an expression of type u64 (64-bit unsigned) which ultimately is used as 16-bit unsigned by typecasting to u16. Fixed by using an unsigned 32-bit integer since the value is truncated anyway in the end.

Fixes 414fd46e7762 ("fsl/fman: Add FMan support")
---
 drivers/net/ethernet/freescale/fman/fman.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/net/ethernet/freescale/fman/fman.c +1 -2
index 9080d2332d030..cdd48b1cc84a7 100644
@@ -1396,8 +1396,7 @@ static void enable_time_stamp(struct fman *fman)
 {
 	struct fman_fpm_regs __iomem *fpm_rg = fman->fpm_regs;
 	u16 fm_clk_freq = fman->state->fm_clk_freq;
-	u32 tmp, intgr, ts_freq;
-	u64 frac;
+	u32 tmp, intgr, ts_freq, frac;
 
 	ts_freq = (u32)(1 << fman->state->count1_micro_bit);
 	/* configure timestamp so that bit 8 will count 1 microsecond
Signature · 1 line
2.25.1
author maintainer
#119 lore raw

PATCH 119/228 power: supply: check if calc_soc succeeded in pm860x_init_battery

In reply to Greg Kroah-Hartman

From: Tom Rix <[email protected]>

[ Upstream commit ccf193dee1f0fff55b556928591f7818bac1b3b1 ]

clang static analysis flags this error

88pm860x_battery.c:522:19: warning: Assigned value is
garbage or undefined [core.uninitialized.Assign]

                info->start_soc = soc;
                                ^ ~~~

soc is set by calling calc_soc.
But calc_soc can return without setting soc.

So check the return status and bail similarly to other checks in pm860x_init_battery and initialize soc to silence the warning.

Fixes a830d28b48bf ("power_supply: Enable battery-charger for 88pm860x")
---
 drivers/power/supply/88pm860x_battery.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/power/supply/88pm860x_battery.c +4 -2
index 63c57dc82ac1d..4eda5065b5bbc 100644
@@ -436,7 +436,7 @@ static void pm860x_init_battery(struct pm860x_battery_info *info)
 	int ret;
 	int data;
 	int bat_remove;
-	int soc;
+	int soc = 0;
 
 	/* measure enable on GPADC1 */
 	data = MEAS1_GP1;
@@ -499,7 +499,9 @@ static void pm860x_init_battery(struct pm860x_battery_info *info)
 	}
 	mutex_unlock(&info->lock);
 
-	calc_soc(info, OCV_MODE_ACTIVE, &soc);
+	ret = calc_soc(info, OCV_MODE_ACTIVE, &soc);
+	if (ret < 0)
+		goto out;
 
 	data = pm860x_reg_read(info->i2c, PM8607_POWER_UP_LOG);
 	bat_remove = data & BAT_WU_LOG;
Signature · 1 line
2.25.1
author maintainer
#129 lore raw

PATCH 129/228 net: spider_net: Fix the size used in a dma_free_coherent() call

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit 36f28f7687a9ce665479cce5d64ce7afaa9e77ae ]

Update the size used in 'dma_free_coherent()' in order to match the one used in the corresponding 'dma_alloc_coherent()', in 'spider_net_init_chain()'.

Fixes d4ed8f8d1fb7 ("Spidernet DMA coalescing")
---
 drivers/net/ethernet/toshiba/spider_net.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/toshiba/spider_net.c +2 -2
index da136b8843dd9..a0fed9035f537 100644
@@ -296,8 +296,8 @@ spider_net_free_chain(struct spider_net_card *card,
 		descr = descr->next;
 	} while (descr != chain->ring);
 
-	dma_free_coherent(&card->pdev->dev, chain->num_desc,
-	    chain->hwring, chain->dma_addr);
+	dma_free_coherent(&card->pdev->dev, chain->num_desc * sizeof(struct spider_net_hw_descr),
+			  chain->hwring, chain->dma_addr);
 }
 
 /**
Signature · 1 line
2.25.1
author maintainer
#94 lore raw

PATCH 94/228 scsi: powertec: Fix different dev_id between request_irq() and free_irq()

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit d179f7c763241c1dc5077fca88ddc3c47d21b763 ]

The dev_id used in request_irq() and free_irq() should match. Use 'info' in both cases.

---
 drivers/scsi/arm/powertec.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/arm/powertec.c +1 -1
index 79aa88911b7f3..b5e4a25ea1ef3 100644
@@ -382,7 +382,7 @@ static int powertecscsi_probe(struct expansion_card *ec,
 
 	if (info->info.scsi.dma != NO_DMA)
 		free_dma(info->info.scsi.dma);
-	free_irq(ec->irq, host);
+	free_irq(ec->irq, info);
 
  out_release:
 	fas216_release(host);
Signature · 1 line
2.25.1
author maintainer
#92 lore raw

PATCH 92/228 cxl: Fix kobject memleak

In reply to Greg Kroah-Hartman

From: Wang Hai <[email protected]>

[ Upstream commit 85c5cbeba8f4fb28e6b9bfb3e467718385f78f76 ]

Currently the error return path from kobject_init_and_add() is not followed by a call to kobject_put() - which means we are leaking the kobject.

Fix it by adding a call to kobject_put() in the error path of kobject_init_and_add().

---
 drivers/misc/cxl/sysfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/misc/cxl/sysfs.c +1 -1
index 393a80bdb846a..b0285c5d8d381 100644
@@ -606,7 +606,7 @@ static struct afu_config_record *cxl_sysfs_afu_new_cr(struct cxl_afu *afu, int c
 	rc = kobject_init_and_add(&cr->kobj, &afu_config_record_type,
 				  &afu->dev.kobj, "cr%i", cr->cr);
 	if (rc)
-		goto err;
+		goto err1;
 
 	rc = sysfs_create_bin_file(&cr->kobj, &cr->config_attr);
 	if (rc)
Signature · 1 line
2.25.1
author maintainer
#117 lore raw

PATCH 117/228 Smack: fix another vsscanf out of bounds

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit a6bd4f6d9b07452b0b19842044a6c3ea384b0b88 ]

This is similar to commit 84e99e58e8d1 ("Smack: slab-out-of-bounds in vsscanf") where we added a bounds check on "rule".

Reported-by [email protected]
Fixes f7112e6c9abf ("Smack: allow for significantly longer Smack labels v4")
---
 security/smack/smackfs.c | 4 ++++
 1 file changed, 4 insertions(+)
security/smack/smackfs.c +4 -0
index 10ee51d044926..981f582539acf 100644
@@ -933,6 +933,10 @@ static ssize_t smk_set_cipso(struct file *file, const char __user *buf,
 
 	for (i = 0; i < catlen; i++) {
 		rule += SMK_DIGITLEN;
+		if (rule > data + count) {
+			rc = -EOVERFLOW;
+			goto out;
+		}
 		ret = sscanf(rule, "%u", &cat);
 		if (ret != 1 || cat > SMACK_CIPSO_MAXCATNUM)
 			goto out;
Signature · 1 line
2.25.1
author maintainer
#90 lore raw

PATCH 90/228 scsi: cumana_2: Fix different dev_id between request_irq() and free_irq()

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit 040ab9c4fd0070cd5fa71ba3a7b95b8470db9b4d ]

The dev_id used in request_irq() and free_irq() should match. Use 'info' in both cases.

---
 drivers/scsi/arm/cumana_2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/arm/cumana_2.c +1 -1
index edce5f3cfdba0..93ba83e3148eb 100644
@@ -454,7 +454,7 @@ static int cumanascsi2_probe(struct expansion_card *ec,
 
 	if (info->info.scsi.dma != NO_DMA)
 		free_dma(info->info.scsi.dma);
-	free_irq(ec->irq, host);
+	free_irq(ec->irq, info);
 
  out_release:
 	fas216_release(host);
Signature · 1 line
2.25.1
author maintainer
#114 lore raw

PATCH 114/228 usb: dwc2: Fix error path in gadget registration

In reply to Greg Kroah-Hartman

From: Marek Szyprowski <[email protected]>

[ Upstream commit 33a06f1300a79cfd461cea0268f05e969d4f34ec ]

When gadget registration fails, one should not call usb_del_gadget_udc(). Ensure this by setting gadget->udc to NULL. Also in case of a failure there is no need to disable low-level hardware, so return immiedetly instead of jumping to error_init label.

This fixes the following kernel NULL ptr dereference on gadget failure (can be easily triggered with g_mass_storage without any module parameters):

dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter besl=1 dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter g_np_tx_fifo_size=1024 dwc2 12480000.hsotg: EPs: 16, dedicated fifos, 7808 entries in SPRAM Mass Storage Function, version: 2009/09/11
LUN: removable file: (no medium)
no file given for LUN0
g_mass_storage 12480000.hsotg: failed to start g_mass_storage: -22 8<--- cut here ---

Unable to handle kernel NULL pointer dereference at virtual address 00000104
pgd = (ptrval)
[00000104] *pgd=00000000
Internal error: Oops: 805 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.8.0-rc5 #3133
Hardware name: Samsung Exynos (Flattened Device Tree)
Workqueue: events deferred_probe_work_func
PC is at usb_del_gadget_udc+0x38/0xc4
LR is at __mutex_lock+0x31c/0xb18
...
Process kworker/0:1 (pid: 12, stack limit = 0x(ptrval))
Stack: (0xef121db0 to 0xef122000)

...
[<c076bf3c>] (usb_del_gadget_udc) from [<c0726bec>] (dwc2_hsotg_remove+0x10/0x20) [<c0726bec>] (dwc2_hsotg_remove) from [<c0711208>] (dwc2_driver_probe+0x57c/0x69c) [<c0711208>] (dwc2_driver_probe) from [<c06247c0>] (platform_drv_probe+0x6c/0xa4) [<c06247c0>] (platform_drv_probe) from [<c0621df4>] (really_probe+0x200/0x48c) [<c0621df4>] (really_probe) from [<c06221e8>] (driver_probe_device+0x78/0x1fc) [<c06221e8>] (driver_probe_device) from [<c061fcd4>] (bus_for_each_drv+0x74/0xb8) [<c061fcd4>] (bus_for_each_drv) from [<c0621b54>] (__device_attach+0xd4/0x16c) [<c0621b54>] (__device_attach) from [<c0620c98>] (bus_probe_device+0x88/0x90) [<c0620c98>] (bus_probe_device) from [<c06211b0>] (deferred_probe_work_func+0x3c/0xd0) [<c06211b0>] (deferred_probe_work_func) from [<c0149280>] (process_one_work+0x234/0x7dc) [<c0149280>] (process_one_work) from [<c014986c>] (worker_thread+0x44/0x51c) [<c014986c>] (worker_thread) from [<c0150b1c>] (kthread+0x158/0x1a0) [<c0150b1c>] (kthread) from [<c0100114>] (ret_from_fork+0x14/0x20)

Exception stack(0xef121fb0 to 0xef121ff8)
...
---[ end trace 9724c2fc7cc9c982 ]---

While fixing this also fix the double call to dwc2_lowlevel_hw_disable() if dr_mode is set to USB_DR_MODE_PERIPHERAL. In such case low-level hardware is already disabled before calling usb_add_gadget_udc(). That function correctly preserves low-level hardware state, there is no need for the second unconditional dwc2_lowlevel_hw_disable() call.

Fixes 207324a321a8 ("usb: dwc2: Postponed gadget registration to the udc class driver")
---
 drivers/usb/dwc2/platform.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/usb/dwc2/platform.c +3 -1
index 442cb93935dd4..405dccf92a315 100644
@@ -459,6 +459,7 @@ static int dwc2_driver_probe(struct platform_device *dev)
 	if (hsotg->gadget_enabled) {
 		retval = usb_add_gadget_udc(hsotg->dev, &hsotg->gadget);
 		if (retval) {
+			hsotg->gadget.udc = NULL;
 			dwc2_hsotg_remove(hsotg);
 			goto error;
 		}
@@ -467,7 +468,8 @@ static int dwc2_driver_probe(struct platform_device *dev)
 	return 0;
 
 error:
-	dwc2_lowlevel_hw_disable(hsotg);
+	if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL)
+		dwc2_lowlevel_hw_disable(hsotg);
 	return retval;
 }
 
Signature · 1 line
2.25.1
author maintainer
#112 lore raw

PATCH 112/228 coresight: tmc: Fix TMC mode read in tmc_read_unprepare_etb()

In reply to Greg Kroah-Hartman

From: Sai Prakash Ranjan <[email protected]>

[ Upstream commit d021f5c5ff679432c5e9faee0fd7350db2efb97c ]

Reading TMC mode register without proper coresight power management can lead to exceptions like the one in the call trace below in tmc_read_unprepare_etb() when the trace data is read after the sink is disabled. So fix this by having a check for coresight sysfs mode before reading TMC mode management register in tmc_read_unprepare_etb() similar to tmc_read_prepare_etb().

SError Interrupt on CPU6, code 0xbe000411 -- SError
pstate: 80400089 (Nzcv daIf +PAN -UAO)

  pc : tmc_read_unprepare_etb+0x74/0x108
  lr : tmc_read_unprepare_etb+0x54/0x108
  sp : ffffff80d9507c30
  x29: ffffff80d9507c30 x28: ffffff80b3569a0c
  x27: 0000000000000000 x26: 00000000000a0001
  x25: ffffff80cbae9550 x24: 0000000000000010
  x23: ffffffd07296b0f0 x22: ffffffd0109ee028
  x21: 0000000000000000 x20: ffffff80d19e70e0
  x19: ffffff80d19e7080 x18: 0000000000000000
  x17: 0000000000000000 x16: 0000000000000000
  x15: 0000000000000000 x14: 0000000000000000
  x13: 0000000000000000 x12: 0000000000000000
  x11: 0000000000000000 x10: dfffffd000000001
  x9 : 0000000000000000 x8 : 0000000000000002
  x7 : ffffffd071d0fe78 x6 : 0000000000000000
  x5 : 0000000000000080 x4 : 0000000000000001
  x3 : ffffffd071d0fe98 x2 : 0000000000000000
  x1 : 0000000000000004 x0 : 0000000000000001
  Kernel panic - not syncing: Asynchronous SError Interrupt
---
 drivers/hwtracing/coresight/coresight-tmc-etf.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)
drivers/hwtracing/coresight/coresight-tmc-etf.c +6 -7
index 0a00f4e941fbb..9bddbfbfbe03b 100644
@@ -587,15 +587,14 @@ int tmc_read_unprepare_etb(struct tmc_drvdata *drvdata)
 
 	spin_lock_irqsave(&drvdata->spinlock, flags);
 
-	/* There is no point in reading a TMC in HW FIFO mode */
-	mode = readl_relaxed(drvdata->base + TMC_MODE);
-	if (mode != TMC_MODE_CIRCULAR_BUFFER) {
-		spin_unlock_irqrestore(&drvdata->spinlock, flags);
-		return -EINVAL;
-	}
-
 	/* Re-enable the TMC if need be */
 	if (drvdata->mode == CS_MODE_SYSFS) {
+		/* There is no point in reading a TMC in HW FIFO mode */
+		mode = readl_relaxed(drvdata->base + TMC_MODE);
+		if (mode != TMC_MODE_CIRCULAR_BUFFER) {
+			spin_unlock_irqrestore(&drvdata->spinlock, flags);
+			return -EINVAL;
+		}
 		/*
 		 * The trace run will continue with the same allocated trace
 		 * buffer. As such zero-out the buffer so that we don't end
Signature · 1 line
2.25.1
author maintainer
#107 lore raw

PATCH 107/228 staging: rtl8192u: fix a dubious looking mask before a shift

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit c4283950a9a4d3bf4a3f362e406c80ab14f10714 ]

Currently the masking of ret with 0xff and followed by a right shift of 8 bits always leaves a zero result. It appears the mask of 0xff is incorrect and should be 0xff00, but I don't have the hardware to test this. Fix this to mask the upper 8 bits before shifting.

[ Not tested ]

Addresses-Coverity: ("Operands don't affect result")

Fixes 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging")
---
 drivers/staging/rtl8192u/r8192U_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/rtl8192u/r8192U_core.c +1 -1
index fbbd1b59dc11d..b5941ae410d9a 100644
@@ -2519,7 +2519,7 @@ static int rtl8192_read_eeprom_info(struct net_device *dev)
 				ret = eprom_read(dev, (EEPROM_TxPwIndex_CCK >> 1));
 				if (ret < 0)
 					return ret;
-				priv->EEPROMTxPowerLevelCCK = ((u16)ret & 0xff) >> 8;
+				priv->EEPROMTxPowerLevelCCK = ((u16)ret & 0xff00) >> 8;
 			} else
 				priv->EEPROMTxPowerLevelCCK = 0x10;
 			RT_TRACE(COMP_EPROM, "CCK Tx Power Levl: 0x%02x\n", priv->EEPROMTxPowerLevelCCK);
Signature · 1 line
2.25.1
author maintainer
#108 lore raw

PATCH 108/228 PCI/ASPM: Add missing newline in sysfs policy

In reply to Greg Kroah-Hartman

From: Xiongfeng Wang <[email protected]>

[ Upstream commit 3167e3d340c092fd47924bc4d23117a3074ef9a9 ]

When I cat ASPM parameter 'policy' by sysfs, it displays as follows. Add a newline for easy reading. Other sysfs attributes already include a newline.

[root@localhost ~]# cat /sys/module/pcie_aspm/parameters/policy [default] performance powersave powersupersave [root@localhost ~]#

Fixes 7d715a6c1ae5 ("PCI: add PCI Express ASPM support")
---
 drivers/pci/pcie/aspm.c | 1 +
 1 file changed, 1 insertion(+)
drivers/pci/pcie/aspm.c +1 -0
index 04d5c62588b77..f41c105adfbd4 100644
@@ -1111,6 +1111,7 @@ static int pcie_aspm_get_policy(char *buffer, struct kernel_param *kp)
 			cnt += sprintf(buffer + cnt, "[%s] ", policy_str[i]);
 		else
 			cnt += sprintf(buffer + cnt, "%s ", policy_str[i]);
+	cnt += sprintf(buffer + cnt, "\n");
 	return cnt;
 }
 
Signature · 1 line
2.25.1
author maintainer
#106 lore raw

PATCH 106/228 powerpc/vdso: Fix vdso cpu truncation

In reply to Greg Kroah-Hartman

From: Milton Miller <[email protected]>

[ Upstream commit a9f675f950a07d5c1dbcbb97aabac56f5ed085e3 ]

The code in vdso_cpu_init that exposes the cpu and numa node to userspace via SPRG_VDSO incorrctly masks the cpu to 12 bits. This means that any kernel running on a box with more than 4096 threads (NR_CPUS advertises a limit of of 8192 cpus) would expose userspace to two cpu contexts running at the same time with the same cpu number.

Note: I'm not aware of any distro shipping a kernel with support for more than 4096 threads today, nor of any system image that currently exceeds 4096 threads. Found via code browsing.

Fixes 18ad51dd342a7eb09dbcd059d0b451b616d4dafc ("powerpc: Add VDSO version of getcpu")
---
 arch/powerpc/kernel/vdso.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/powerpc/kernel/vdso.c +1 -1
index 22b01a3962f06..3edaee28b6383 100644
@@ -704,7 +704,7 @@ int vdso_getcpu_init(void)
 	node = cpu_to_node(cpu);
 	WARN_ON_ONCE(node > 0xffff);
 
-	val = (cpu & 0xfff) | ((node & 0xffff) << 16);
+	val = (cpu & 0xffff) | ((node & 0xffff) << 16);
 	mtspr(SPRN_SPRG_VDSO_WRITE, val);
 	get_paca()->sprg_vdso = val;
 
Signature · 1 line
2.25.1
author maintainer
#100 lore raw

PATCH 100/228 PCI: Fix pci_cfg_wait queue locking problem

In reply to Greg Kroah-Hartman

From: Bjorn Helgaas <[email protected]>

[ Upstream commit 2a7e32d0547f41c5ce244f84cf5d6ca7fccee7eb ]

The pci_cfg_wait queue is used to prevent user-space config accesses to devices while they are recovering from reset.

Previously we used these operations on pci_cfg_wait:

__add_wait_queue(&pci_cfg_wait, ...)
__remove_wait_queue(&pci_cfg_wait, ...)
wake_up_all(&pci_cfg_wait)

The wake_up acquires the wait queue lock, but the add and remove do not.

Originally these were all protected by the pci_lock, but cdcb33f98244 ("PCI: Avoid possible deadlock on pci_lock and p->pi_lock"), moved wake_up_all() outside pci_lock, so it could race with add/remove operations, which caused occasional kernel panics, e.g., during vfio-pci hotplug/unplug testing:

  Unable to handle kernel read from unreadable memory at virtual address ffff802dac469000

Resolve this by using wait_event() instead of __add_wait_queue() and __remove_wait_queue(). The wait queue lock is held by both wait_event() and wake_up_all(), so it provides mutual exclusion.

Fixes cdcb33f98244 ("PCI: Avoid possible deadlock on pci_lock and p->pi_lock")

Based-on: https://lore.kernel.org/linux-pci/[email protected]/

---
 drivers/pci/access.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)
drivers/pci/access.c +2 -6
index 913d6722ece98..8c585e7ca5209 100644
@@ -205,17 +205,13 @@ EXPORT_SYMBOL(pci_bus_set_ops);
 static DECLARE_WAIT_QUEUE_HEAD(pci_cfg_wait);
 
 static noinline void pci_wait_cfg(struct pci_dev *dev)
+	__must_hold(&pci_lock)
 {
-	DECLARE_WAITQUEUE(wait, current);
-
-	__add_wait_queue(&pci_cfg_wait, &wait);
 	do {
-		set_current_state(TASK_UNINTERRUPTIBLE);
 		raw_spin_unlock_irq(&pci_lock);
-		schedule();
+		wait_event(pci_cfg_wait, !dev->block_cfg_access);
 		raw_spin_lock_irq(&pci_lock);
 	} while (dev->block_cfg_access);
-	__remove_wait_queue(&pci_cfg_wait, &wait);
 }
 
 /* Returns 0 on success, negative values indicate error. */
Signature · 1 line
2.25.1
author maintainer
#97 lore raw

PATCH 97/228 media: firewire: Using uninitialized values in node_probe()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 2505a210fc126599013aec2be741df20aaacc490 ]

If fw_csr_string() returns -ENOENT, then "name" is uninitialized. So then the "strlen(model_names[i]) <= name_len" is true because strlen() is unsigned and -ENOENT is type promoted to a very high positive value. Then the "strncmp(name, model_names[i], name_len)" uses uninitialized data because "name" is uninitialized.

Fixes 92374e886c75 ("[media] firedtv: drop obsolete backend abstraction")
---
 drivers/media/firewire/firedtv-fw.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/media/firewire/firedtv-fw.c +2 -0
index 247f0e7cb5f7f..5d634706a7eaa 100644
@@ -271,6 +271,8 @@ static int node_probe(struct fw_unit *unit, const struct ieee1394_device_id *id)
 
 	name_len = fw_csr_string(unit->directory, CSR_MODEL,
 				 name, sizeof(name));
+	if (name_len < 0)
+		return name_len;
 	for (i = ARRAY_SIZE(model_names); --i; )
 		if (strlen(model_names[i]) <= name_len &&
 		    strncmp(name, model_names[i], name_len) == 0)
Signature · 1 line
2.25.1
author maintainer
#96 lore raw

PATCH 96/228 ipvs: allow connection reuse for unconfirmed conntrack

In reply to Greg Kroah-Hartman

From: Julian Anastasov <[email protected]>

[ Upstream commit f0a5e4d7a594e0fe237d3dfafb069bb82f80f42f ]

YangYuxi is reporting that connection reuse is causing one-second delay when SYN hits existing connection in TIME_WAIT state. Such delay was added to give time to expire both the IPVS connection and the corresponding conntrack. This was considered a rare case at that time but it is causing problem for some environments such as Kubernetes.

As nf_conntrack_tcp_packet() can decide to release the conntrack in TIME_WAIT state and to replace it with a fresh NEW conntrack, we can use this to allow rescheduling just by tuning our check: if the conntrack is confirmed we can not schedule it to different real server and the one-second delay still applies but if new conntrack was created, we are free to select new real server without any delays.

YangYuxi lists some of the problem reports:

- One second connection delay in masquerading mode:
https://marc.info/?t=151683118100004&r=1&w=2

- IPVS low throughput #70747
https://github.com/kubernetes/kubernetes/issues/70747

- Apache Bench can fill up ipvs service proxy in seconds #544
https://github.com/cloudnativelabs/kube-router/issues/544

- Additional 1s latency in host -> service IP -> pod
https://github.com/kubernetes/kubernetes/issues/90854

Fixes f719e3754ee2 ("ipvs: drop first packet to redirect conntrack")
---
 include/net/ip_vs.h             | 10 ++++------
 net/netfilter/ipvs/ip_vs_core.c | 12 +++++++-----
 2 files changed, 11 insertions(+), 11 deletions(-)
include/net/ip_vs.h +4 -6
index f4e5ac8aa3668..1fb79c78e2007 100644
@@ -1607,18 +1607,16 @@ static inline void ip_vs_conn_drop_conntrack(struct ip_vs_conn *cp)
 }
 #endif /* CONFIG_IP_VS_NFCT */
 
-/* Really using conntrack? */
-static inline bool ip_vs_conn_uses_conntrack(struct ip_vs_conn *cp,
-					     struct sk_buff *skb)
+/* Using old conntrack that can not be redirected to another real server? */
+static inline bool ip_vs_conn_uses_old_conntrack(struct ip_vs_conn *cp,
+						 struct sk_buff *skb)
 {
 #ifdef CONFIG_IP_VS_NFCT
 	enum ip_conntrack_info ctinfo;
 	struct nf_conn *ct;
 
-	if (!(cp->flags & IP_VS_CONN_F_NFCT))
-		return false;
 	ct = nf_ct_get(skb, &ctinfo);
-	if (ct)
+	if (ct && nf_ct_is_confirmed(ct))
 		return true;
 #endif
 	return false;
net/netfilter/ipvs/ip_vs_core.c +7 -5
index 2156571455dbf..a95fe5fe9f046 100644
@@ -1916,14 +1916,14 @@ ip_vs_in(struct netns_ipvs *ipvs, unsigned int hooknum, struct sk_buff *skb, int
 
 	conn_reuse_mode = sysctl_conn_reuse_mode(ipvs);
 	if (conn_reuse_mode && !iph.fragoffs && is_new_conn(skb, &iph) && cp) {
-		bool uses_ct = false, resched = false;
+		bool old_ct = false, resched = false;
 
 		if (unlikely(sysctl_expire_nodest_conn(ipvs)) && cp->dest &&
 		    unlikely(!atomic_read(&cp->dest->weight))) {
 			resched = true;
-			uses_ct = ip_vs_conn_uses_conntrack(cp, skb);
+			old_ct = ip_vs_conn_uses_old_conntrack(cp, skb);
 		} else if (is_new_conn_expected(cp, conn_reuse_mode)) {
-			uses_ct = ip_vs_conn_uses_conntrack(cp, skb);
+			old_ct = ip_vs_conn_uses_old_conntrack(cp, skb);
 			if (!atomic_read(&cp->n_control)) {
 				resched = true;
 			} else {
@@ -1931,15 +1931,17 @@ ip_vs_in(struct netns_ipvs *ipvs, unsigned int hooknum, struct sk_buff *skb, int
 				 * that uses conntrack while it is still
 				 * referenced by controlled connection(s).
 				 */
-				resched = !uses_ct;
+				resched = !old_ct;
 			}
 		}
 
 		if (resched) {
+			if (!old_ct)
+				cp->flags &= ~IP_VS_CONN_F_NFCT;
 			if (!atomic_read(&cp->n_control))
 				ip_vs_conn_expire_now(cp);
 			__ip_vs_conn_put(cp);
-			if (uses_ct)
+			if (old_ct)
 				return NF_DROP;
 			cp = NULL;
 		}
Signature · 1 line
2.25.1
author maintainer
#58 lore raw

PATCH 58/228 spi: lantiq: fix: Rx overflow error in full duplex mode

In reply to Greg Kroah-Hartman

From: Dilip Kota <[email protected]>

[ Upstream commit 661ccf2b3f1360be50242726f7c26ced6a9e7d52 ]

In full duplex mode, rx overflow error is observed. To overcome the error, wait until the complete data got received and proceed further.

---
 drivers/spi/spi-lantiq-ssc.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/spi/spi-lantiq-ssc.c +10 -0
index d5976615d924b..dc740b5f720ba 100644
@@ -187,6 +187,7 @@ struct lantiq_ssc_spi {
 	unsigned int			tx_fifo_size;
 	unsigned int			rx_fifo_size;
 	unsigned int			base_cs;
+	unsigned int			fdx_tx_level;
 };
 
 static u32 lantiq_ssc_readl(const struct lantiq_ssc_spi *spi, u32 reg)
@@ -484,6 +485,7 @@ static void tx_fifo_write(struct lantiq_ssc_spi *spi)
 	u32 data;
 	unsigned int tx_free = tx_fifo_free(spi);
 
+	spi->fdx_tx_level = 0;
 	while (spi->tx_todo && tx_free) {
 		switch (spi->bits_per_word) {
 		case 2 ... 8:
@@ -512,6 +514,7 @@ static void tx_fifo_write(struct lantiq_ssc_spi *spi)
 
 		lantiq_ssc_writel(spi, data, LTQ_SPI_TB);
 		tx_free--;
+		spi->fdx_tx_level++;
 	}
 }
 
@@ -523,6 +526,13 @@ static void rx_fifo_read_full_duplex(struct lantiq_ssc_spi *spi)
 	u32 data;
 	unsigned int rx_fill = rx_fifo_level(spi);
 
+	/*
+	 * Wait until all expected data to be shifted in.
+	 * Otherwise, rx overrun may occur.
+	 */
+	while (rx_fill != spi->fdx_tx_level)
+		rx_fill = rx_fifo_level(spi);
+
 	while (rx_fill) {
 		data = lantiq_ssc_readl(spi, LTQ_SPI_RB);
 
Signature · 1 line
2.25.1
author maintainer
#56 lore raw

PATCH 56/228 platform/x86: intel-vbtn: Fix return value check in check_acpi_dev()

In reply to Greg Kroah-Hartman

From: Lu Wei <[email protected]>

[ Upstream commit 64dd4a5a7d214a07e3d9f40227ec30ac8ba8796e ]

In the function check_acpi_dev(), if it fails to create platform device, the return value is ERR_PTR() or NULL. Thus it must use IS_ERR_OR_NULL() to check return value.

Fixes 332e081225fc ("intel-vbtn: new driver for Intel Virtual Button")
---
 drivers/platform/x86/intel-vbtn.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/platform/x86/intel-vbtn.c +1 -1
index 58c5ff36523ab..d7fa2b88d27ab 100644
@@ -178,7 +178,7 @@ check_acpi_dev(acpi_handle handle, u32 lvl, void *context, void **rv)
 		return AE_OK;
 
 	if (acpi_match_device_ids(dev, ids) == 0)
-		if (acpi_create_platform_device(dev, NULL))
+		if (!IS_ERR_OR_NULL(acpi_create_platform_device(dev, NULL)))
 			dev_info(&dev->dev,
 				 "intel-vbtn: created platform device\n");
 
Signature · 1 line
2.25.1
author maintainer
#57 lore raw

PATCH 57/228 ARM: at91: pm: add missing put_device() call in at91_pm_sram_init()

In reply to Greg Kroah-Hartman

From: yu kuai <[email protected]>

[ Upstream commit f87a4f022c44e5b87e842a9f3e644fba87e8385f ]

if of_find_device_by_node() succeed, at91_pm_sram_init() doesn't have a corresponding put_device(). Thus add a jump target to fix the exception handling for this function implementation.

Fixes d2e467905596 ("ARM: at91: pm: use the mmio-sram pool to access SRAM")
---
 arch/arm/mach-at91/pm.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)
arch/arm/mach-at91/pm.c +8 -3
index 849014c01cf4d..bebaa0b0aef40 100644
@@ -456,13 +456,13 @@ static void __init at91_pm_sram_init(void)
 	sram_pool = gen_pool_get(&pdev->dev, NULL);
 	if (!sram_pool) {
 		pr_warn("%s: sram pool unavailable!\n", __func__);
-		return;
+		goto out_put_device;
 	}
 
 	sram_base = gen_pool_alloc(sram_pool, at91_pm_suspend_in_sram_sz);
 	if (!sram_base) {
 		pr_warn("%s: unable to alloc sram!\n", __func__);
-		return;
+		goto out_put_device;
 	}
 
 	sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
@@ -470,12 +470,17 @@ static void __init at91_pm_sram_init(void)
 					at91_pm_suspend_in_sram_sz, false);
 	if (!at91_suspend_sram_fn) {
 		pr_warn("SRAM: Could not map\n");
-		return;
+		goto out_put_device;
 	}
 
 	/* Copy the pm suspend handler to SRAM */
 	at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn,
 			&at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz);
+	return;
+
+out_put_device:
+	put_device(&pdev->dev);
+	return;
 }
 
 static void __init at91_pm_backup_init(void)
Signature · 1 line
2.25.1
author maintainer
#110 lore raw

PATCH 110/228 USB: serial: iuu_phoenix: fix led-activity helpers

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

[ Upstream commit de37458f8c2bfc465500a1dd0d15dbe96d2a698c ]

The set-led command is eight bytes long and starts with a command byte followed by six bytes of RGB data and ends with a byte encoding a frequency (see iuu_led() and iuu_rgbf_fill_buffer()).

The led activity helpers had a few long-standing bugs which corrupted the command packets by inserting a second command byte and thereby offsetting the RGB data and dropping the frequency in non-xmas mode.

In xmas mode, a related off-by-one error left the frequency field uninitialised.

---
 drivers/usb/serial/iuu_phoenix.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)
drivers/usb/serial/iuu_phoenix.c +8 -6
index a1a11f8bb2a3d..0c9e24b217f7d 100644
@@ -359,10 +359,11 @@ static void iuu_led_activity_on(struct urb *urb)
 	struct usb_serial_port *port = urb->context;
 	int result;
 	char *buf_ptr = port->write_urb->transfer_buffer;
-	*buf_ptr++ = IUU_SET_LED;
+
 	if (xmas) {
-		get_random_bytes(buf_ptr, 6);
-		*(buf_ptr+7) = 1;
+		buf_ptr[0] = IUU_SET_LED;
+		get_random_bytes(buf_ptr + 1, 6);
+		buf_ptr[7] = 1;
 	} else {
 		iuu_rgbf_fill_buffer(buf_ptr, 255, 255, 0, 0, 0, 0, 255);
 	}
@@ -380,13 +381,14 @@ static void iuu_led_activity_off(struct urb *urb)
 	struct usb_serial_port *port = urb->context;
 	int result;
 	char *buf_ptr = port->write_urb->transfer_buffer;
+
 	if (xmas) {
 		iuu_rxcmd(urb);
 		return;
-	} else {
-		*buf_ptr++ = IUU_SET_LED;
-		iuu_rgbf_fill_buffer(buf_ptr, 0, 0, 255, 255, 0, 0, 255);
 	}
+
+	iuu_rgbf_fill_buffer(buf_ptr, 0, 0, 255, 255, 0, 0, 255);
+
 	usb_fill_bulk_urb(port->write_urb, port->serial->dev,
 			  usb_sndbulkpipe(port->serial->dev,
 					  port->bulk_out_endpointAddress),
Signature · 1 line
2.25.1