Skip to contentSkip to conversation

hwmon: (tmp513) use simple i2c probe

PATCH Applied Stephen Kitt 2 participants 2 messages Aug 21, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 hwmon: (tmp513) use simple i2c probe

As part of the ongoing i2c transition to the simple probe ("probe_new"), this patch uses i2c_match_id to retrieve the driver_data for the probed device. The id parameter is thus no longer necessary and the simple probe can be used instead.

---
 drivers/hwmon/tmp513.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
drivers/hwmon/tmp513.c +4 -5
index df66e0bc1253..9f5885b0eb74 100644
@@ -709,8 +709,7 @@ static int tmp51x_configure(struct device *dev, struct tmp51x_data *data)
 	return 0;
 }
 
-static int tmp51x_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int tmp51x_probe(struct i2c_client *client)
 {
 	struct device *dev = &client->dev;
 	struct tmp51x_data *data;
@@ -724,7 +723,7 @@ static int tmp51x_probe(struct i2c_client *client,
 	if (client->dev.of_node)
 		data->id = (enum tmp51x_ids)device_get_match_data(&client->dev);
 	else
-		data->id = id->driver_data;
+		data->id = i2c_match_id(tmp51x_id, client)->driver_data;
 
 	ret = tmp51x_configure(dev, data);
 	if (ret < 0) {
@@ -751,7 +750,7 @@ static int tmp51x_probe(struct i2c_client *client,
 	if (IS_ERR(hwmon_dev))
 		return PTR_ERR(hwmon_dev);
 
-	dev_dbg(dev, "power monitor %s\n", id->name);
+	dev_dbg(dev, "power monitor %s\n", client->name);
 
 	return 0;
 }
@@ -761,7 +760,7 @@ static struct i2c_driver tmp51x_driver = {
 		.name	= "tmp51x",
 		.of_match_table = of_match_ptr(tmp51x_of_match),
 	},
-	.probe		= tmp51x_probe,
+	.probe_new	= tmp51x_probe,
 	.id_table	= tmp51x_id,
 };
 
Signature · 1 line
2.25.4
maintainer Applied
#1 lore raw
Quoted 6 lines · Stephen Kitt

As part of the ongoing i2c transition to the simple probe ("probe_new"), this patch uses i2c_match_id to retrieve the driver_data for the probed device. The id parameter is thus no longer necessary and the simple probe can be used instead.

Applied.

Thanks,
Guenter

Quoted 45 lines
---
 drivers/hwmon/tmp513.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
drivers/hwmon/tmp513.c +4 -5
index df66e0bc1253..9f5885b0eb74 100644
@@ -709,8 +709,7 @@ static int tmp51x_configure(struct device *dev, struct tmp51x_data *data)
 	return 0;
 }
 
-static int tmp51x_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int tmp51x_probe(struct i2c_client *client)
 {
 	struct device *dev = &client->dev;
 	struct tmp51x_data *data;
@@ -724,7 +723,7 @@ static int tmp51x_probe(struct i2c_client *client,
 	if (client->dev.of_node)
 		data->id = (enum tmp51x_ids)device_get_match_data(&client->dev);
 	else
-		data->id = id->driver_data;
+		data->id = i2c_match_id(tmp51x_id, client)->driver_data;
 
 	ret = tmp51x_configure(dev, data);
 	if (ret < 0) {
@@ -751,7 +750,7 @@ static int tmp51x_probe(struct i2c_client *client,
 	if (IS_ERR(hwmon_dev))
 		return PTR_ERR(hwmon_dev);
 
-	dev_dbg(dev, "power monitor %s\n", id->name);
+	dev_dbg(dev, "power monitor %s\n", client->name);
 
 	return 0;
 }
@@ -761,7 +760,7 @@ static struct i2c_driver tmp51x_driver = {
 		.name	= "tmp51x",
 		.of_match_table = of_match_ptr(tmp51x_of_match),
 	},
-	.probe		= tmp51x_probe,
+	.probe_new	= tmp51x_probe,
 	.id_table	= tmp51x_id,
 };