dyndbg: POC use dynamic_debug_exec_queries in DRM
cover dyndbg: POC use dynamic_debug_exec_queries in DRM
This patchset tests/demonstrates using dynamic_debug_exec_queries() to alter 2 drivers' pr_debugs without a user directly using >control.
For drm.core, I copied drm.debug module parameter model, adding drm.debug2 as a POC user interface to control 2 pr_debug additions to drm_printk:drm_dbg,dev_dbg, allowing both category and >control to work in parallel. This patch makes no attempt to integrate drm's category mechanism with the "format=^class" callsite selection; thats the "theory", but it needs testing.
For i915/gvt, I repeated the pattern. I focussed on gvt only, because it had the most compelling use of format strings as pr_debug classes; ~120 pr_debugs in 9 classes. These are mapped onto bits of the param.
bash-5.0# echo 0x0 > /sys/module/i915/parameters/debug_dyn
[ 3137.044185] set_dyndbg: result:0x0 from 0x0 [ 3137.044185] [ 3137.047370] dyndbg: query 0: "format='^gvt: cmd: ' -p" [ 3137.050302] dyndbg: entry, buf:'format='^gvt: cmd: ' -p' [ 3137.053331] dyndbg: start-of-word:0 'format='^gvt: cmd: ' -p'
These patches were the test/use case for-59 fixes:
https://lore.kernel.org/lkml/[email protected]/
Jim Cromie (4):
drm-printk: POC caller of dynamic-debug-exec-queries
drm-printk: call pr_debug() from drm_dev_dbg, __drm_dbg
i915: add -DDYNAMIC_DEBUG_MODULE to i915/gvt/Makefile
i915: POC use dynamic_debug_exec_queries to control pr_debugs in gvt
drivers/gpu/drm/drm_print.c | 54 ++++++++++++++++++--- drivers/gpu/drm/i915/gvt/Makefile | 5 +- drivers/gpu/drm/i915/i915_params.c | 76 ++++++++++++++++++++++++++++++ 3 files changed, 127 insertions(+), 8 deletions(-)
Signature · 1 line
2.26.2
PATCH 1/4 drm-printk: POC caller of dynamic-debug-exec-queries
Export of dynamic-debug-exec-queries exists for users like drm.
This commit is a 1st user-test; it adds a 2nd knob, __drm_debug2, similar in function to __drm_debug. module_param_cb wires it to a callback which maps the input value to one of: "module=drm* +/-p".
The include is needed to see the exported function prototype.
Notes:
The define DEBUG at top of drm-printk enables all pr_debug()s, independent of CONFIG_DYNAMIC_DEBUG_CORE.
drm-printk is an independent print control system using __drm_debug bits. The plan is to find the low-level macros in which to insert a pr_debug call, their eventual callsites will have distinct METADATA, so will be itemized in control, and individually selectable.
--- drivers/gpu/drm/drm_print.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+)
drivers/gpu/drm/drm_print.c +35 -0
@@ -27,6 +27,7 @@#include <stdarg.h> +#include <linux/dynamic_debug.h> #include <linux/io.h> #include <linux/moduleparam.h> #include <linux/seq_file.h>
@@ -54,6 +55,40 @@ MODULE_PARM_DESC(debug, "Enable debug output, where each bit enables a debug cat "\t\tBit 8 (0x100) will enable DP messages (displayport code)");module_param_named (debug, __drm_debug, int,0600 ); +/* POC for callback -> ddebug_exec_queries */ +unsigned int __drm_debug2; +EXPORT_SYMBOL (__drm_debug2); + +static int param_set_dyndbg (const char *val,const struct kernel_param *kp) +{ +int chgct, result; + + result =kstrtouint (val,0 , (unsigned int *)kp->arg); +pr_warn ("set_dyndbg: result:%d from %s\n" , result, val); + +if (result) + chgct =dynamic_debug_exec_queries ("module=drm* +p" ,NULL ); +else + chgct =dynamic_debug_exec_queries ("module=drm* -p" ,NULL ); + +pr_warn ("change ct:%d\n" , chgct); +return 0 ; +} +static int param_get_dyndbg (char *buffer,const struct kernel_param *kp) +{ +return scnprintf (buffer,PAGE_SIZE ,"%u\n" , + *((unsigned int *)kp->arg)); +} +static const struct kernel_param_ops param_ops_dyndbg = { + .set = param_set_dyndbg, + .get = param_get_dyndbg, +}; + +MODULE_PARM_DESC (debug_dyn,"Enable debug output, where each bit enables a debug category.\n" +"\t\tthese wont work yet\n" ); +module_param_cb (debug_dyn, ¶m_ops_dyndbg, &__drm_debug2,0644 ); + +void __drm_puts_coredump (struct drm_printer *p,const char *str) {struct drm_print_iterator *iterator = p->arg;
Signature · 1 line
2.26.2
kernel test robot
build botRe: [PATCH 1/4] drm-printk: POC caller of dynamic-debug-exec-queries
I love your patch! Yet something to improve:
Hi Jim,
I love your patch! Yet something to improve:
[auto build test ERROR on drm-intel/for-linux-next]
[also build test ERROR on linux/master tegra-drm/drm/tegra/for-next drm-tip/drm-tip linus/master v5.9-rc2 next-20200826] [cannot apply to drm/drm-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Jim-Cromie/dyndbg-POC-use-dynamic_debug_exec_queries-in-DRM/20200827-010409 base: git://anongit.freedesktop.org/drm-intel for-linux-next config: microblaze-randconfig-r006-20200826 (attached as .config) compiler: microblaze-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=microblaze
If you fix the issue, kindly add following tag as appropriate
All errors (new ones prefixed by >>):
In file included from drivers/gpu/drm/drm_print.c:30:
include/linux/dynamic_debug.h: In function 'ddebug_dyndbg_module_param_cb':
>> include/linux/dynamic_debug.h:196:3: error: implicit declaration of function 'printk'; did you mean 'bprintf'? [-Werror=implicit-function-declaration]
196 | printk(KERN_WARNING "dyndbg param is supported only in "
| ^~~~~~
| bprintf
>> include/linux/dynamic_debug.h:196:10: error: 'KERN_WARNING' undeclared (first use in this function)
196 | printk(KERN_WARNING "dyndbg param is supported only in "
| ^~~~~~~~~~~~
include/linux/dynamic_debug.h:196:10: note: each undeclared identifier is reported only once for each function it appears in
>> include/linux/dynamic_debug.h:196:22: error: expected ')' before string constant
196 | printk(KERN_WARNING "dyndbg param is supported only in "
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| )
In file included from include/linux/kernel.h:15,
from include/asm-generic/bug.h:19,
from ./arch/microblaze/include/generated/asm/bug.h:1,
from include/linux/bug.h:5,
from include/linux/io.h:11,
from drivers/gpu/drm/drm_print.c:31:
include/linux/printk.h: At top level:
>> include/linux/printk.h:171:5: error: conflicting types for 'printk'
171 | int printk(const char *fmt, ...);
| ^~~~~~
include/linux/printk.h:171:1: note: a parameter list with an ellipsis can't match an empty parameter name list declaration
171 | int printk(const char *fmt, ...);
| ^~~
In file included from drivers/gpu/drm/drm_print.c:30:
include/linux/dynamic_debug.h:196:3: note: previous implicit declaration of 'printk' was here
196 | printk(KERN_WARNING "dyndbg param is supported only in "
| ^~~~~~
drivers/gpu/drm/drm_print.c: In function 'param_set_dyndbg':
>> drivers/gpu/drm/drm_print.c:70:11: error: implicit declaration of function 'dynamic_debug_exec_queries' [-Werror=implicit-function-declaration]
70 | chgct = dynamic_debug_exec_queries("module=drm* +p", NULL);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~cc1: some warnings being treated as errors
# https://github.com/0day-ci/linux/commit/ad959a93dccb8fe5deb5a7da3e22049779571b9b
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Jim-Cromie/dyndbg-POC-use-dynamic_debug_exec_queries-in-DRM/20200827-010409 git checkout ad959a93dccb8fe5deb5a7da3e22049779571b9b
vim +196 include/linux/dynamic_debug.h
e9d376f0fa66bd6 Jason Baron 2009-02-05 190
b48420c1d3019ce Jim Cromie 2012-04-27 191 static inline int ddebug_dyndbg_module_param_cb(char *param, char *val,
b48420c1d3019ce Jim Cromie 2012-04-27 192 const char *modname)
b48420c1d3019ce Jim Cromie 2012-04-27 193 {
b48420c1d3019ce Jim Cromie 2012-04-27 194 if (strstr(param, "dyndbg")) {
516cf1be07cf3ab Jim Cromie 2012-05-01 195 /* avoid pr_warn(), which wants pr_fmt() fully defined */
516cf1be07cf3ab Jim Cromie 2012-05-01 @196 printk(KERN_WARNING "dyndbg param is supported only in "
b48420c1d3019ce Jim Cromie 2012-04-27 197 "CONFIG_DYNAMIC_DEBUG builds\n");
b48420c1d3019ce Jim Cromie 2012-04-27 198 return 0; /* allow and ignore */
b48420c1d3019ce Jim Cromie 2012-04-27 199 }
b48420c1d3019ce Jim Cromie 2012-04-27 200 return -EINVAL;
b48420c1d3019ce Jim Cromie 2012-04-27 201 }
b48420c1d3019ce Jim Cromie 2012-04-27 202 ---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
kernel test robot
build botRe: [PATCH 1/4] drm-printk: POC caller of dynamic-debug-exec-queries
In reply to Jim CromieI love your patch! Yet something to improve:
Hi Jim,
I love your patch! Yet something to improve:
[auto build test ERROR on drm-intel/for-linux-next]
[also build test ERROR on linux/master drm-tip/drm-tip linus/master v5.9-rc2 next-20200826] [cannot apply to drm/drm-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Jim-Cromie/dyndbg-POC-use-dynamic_debug_exec_queries-in-DRM/20200827-010409 base: git://anongit.freedesktop.org/drm-intel for-linux-next config: arm64-randconfig-r002-20200826 (attached as .config) compiler: clang version 12.0.0 (https://github.com/llvm/llvm-project 7cfcecece0e0430937cf529ce74d3a071a4dedc6)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# install arm64 cross compiling tool for clang build
# apt-get install binutils-aarch64-linux-gnu
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=arm64
If you fix the issue, kindly add following tag as appropriate
All errors (new ones prefixed by >>):
In file included from drivers/gpu/drm/drm_print.c:30:
>> include/linux/dynamic_debug.h:196:3: error: implicit declaration of function 'printk' [-Werror,-Wimplicit-function-declaration]
printk(KERN_WARNING "dyndbg param is supported only in "
^
>> include/linux/dynamic_debug.h:196:10: error: use of undeclared identifier 'KERN_WARNING'
printk(KERN_WARNING "dyndbg param is supported only in "
^
In file included from drivers/gpu/drm/drm_print.c:31:
In file included from include/linux/io.h:11:
In file included from include/linux/bug.h:5:
In file included from arch/arm64/include/asm/bug.h:26:
In file included from include/asm-generic/bug.h:19:
In file included from include/linux/kernel.h:15:
include/linux/printk.h:171:5: error: conflicting types for 'printk'
int printk(const char *fmt, ...);
^
include/linux/dynamic_debug.h:196:3: note: previous implicit declaration is here
printk(KERN_WARNING "dyndbg param is supported only in "
^
>> drivers/gpu/drm/drm_print.c:70:11: error: implicit declaration of function 'dynamic_debug_exec_queries' [-Werror,-Wimplicit-function-declaration]
chgct = dynamic_debug_exec_queries("module=drm* +p", NULL);
^4 errors generated.
# https://github.com/0day-ci/linux/commit/ad959a93dccb8fe5deb5a7da3e22049779571b9b
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Jim-Cromie/dyndbg-POC-use-dynamic_debug_exec_queries-in-DRM/20200827-010409 git checkout ad959a93dccb8fe5deb5a7da3e22049779571b9b
vim +/printk +196 include/linux/dynamic_debug.h
e9d376f0fa66bd6 Jason Baron 2009-02-05 190
b48420c1d3019ce Jim Cromie 2012-04-27 191 static inline int ddebug_dyndbg_module_param_cb(char *param, char *val,
b48420c1d3019ce Jim Cromie 2012-04-27 192 const char *modname)
b48420c1d3019ce Jim Cromie 2012-04-27 193 {
b48420c1d3019ce Jim Cromie 2012-04-27 194 if (strstr(param, "dyndbg")) {
516cf1be07cf3ab Jim Cromie 2012-05-01 195 /* avoid pr_warn(), which wants pr_fmt() fully defined */
516cf1be07cf3ab Jim Cromie 2012-05-01 @196 printk(KERN_WARNING "dyndbg param is supported only in "
b48420c1d3019ce Jim Cromie 2012-04-27 197 "CONFIG_DYNAMIC_DEBUG builds\n");
b48420c1d3019ce Jim Cromie 2012-04-27 198 return 0; /* allow and ignore */
b48420c1d3019ce Jim Cromie 2012-04-27 199 }
b48420c1d3019ce Jim Cromie 2012-04-27 200 return -EINVAL;
b48420c1d3019ce Jim Cromie 2012-04-27 201 }
b48420c1d3019ce Jim Cromie 2012-04-27 202 ---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
PATCH 2/4 drm-printk: call pr_debug() from drm_dev_dbg, __drm_dbg
In reply to Jim CromiePut the pr_debug() after the vaf setup work, so as to use it. And move the if-category-disabled-return after both, so the pr_debug() runs unconditionally.
This lets both debug-printers execute independently, according to their respective controls, allowing later comparison to each other.
#> echo module=drm +pmftl > /proc/dynamic_debug/control
yields logging like:
[1772] drm:drm_dev_dbg:305: i915 0000:00:02.0: [drm:intel_atomic_get_global_obj_state [i915]]
Cat:16 Added new global object 000000006fa51dd6 state 00000000bbddcf9d to 000000005f6e1bc3
[1772] drm:drm_dev_dbg:305: i915 0000:00:02.0: [drm:intel_atomic_get_global_obj_state [i915]]
Cat:16 Added new global object 000000002a5e020a state 000000002b3685ed to 000000005f6e1bc3
[198] drm:drm_dev_dbg:305: i915 0000:00:02.0: [drm:drm_update_vblank_count [drm]]
Cat:32 updating vblank count on crtc 0: current=260920, diff=0, hw=192024 hw_last=192024
[1772] drm:__drm_dbg:331: [drm:drm_atomic_nonblocking_commit [drm]] Cat:16 committing 000000005f6e1bc3 nonblocking [1772] drm:__drm_dbg:331: [drm:drm_mode_object_put.part.0 [drm]] Cat:1 OBJ ID: 113 (4)
[1772] drm:__drm_dbg:331: [drm:drm_ioctl [drm]] Cat:1 comm="gnome-shell" pid=1772, dev=0xe200, auth=1, I915_GEM_CREATE [1772] drm:__drm_dbg:331: [drm:drm_ioctl [drm]] Cat:1 comm="gnome-shell" pid=1772, dev=0xe200, auth=1, I915_GEM_SET_DOMAIN [1772] drm:__drm_dbg:331: [drm:drm_ioctl [drm]] Cat:1 comm="gnome-shell" pid=1772, dev=0xe200, auth=1, I915_GEM_SET_TILING [1772] drm:__drm_dbg:331: [drm:drm_ioctl [drm]] Cat:1 comm="gnome-shell" pid=1772, dev=0xe200, auth=1, I915_GEM_MMAP_OFFSET
Clearly, the mflt flags arent very helpful here, and callsite control is all or nothing (since theres only 2 callsites handling all the categories). We are 1 below the function layer of interest, but theres room for optimism.
--- drivers/gpu/drm/drm_print.c | 27 +++++++++++++++++---------- 1 file changed, 17 insertions(+), 10 deletions(-)
drivers/gpu/drm/drm_print.c +17 -10
@@ -27,6 +27,7 @@#include <stdarg.h> +#define DYNAMIC_DEBUG_MODULE #include <linux/dynamic_debug.h> #include <linux/io.h> #include <linux/moduleparam.h>
@@ -61,17 +62,17 @@ EXPORT_SYMBOL(__drm_debug2);static int param_set_dyndbg (const char *val,const struct kernel_param *kp) { -int chgct, result; +int chgct, rc, result; - result =kstrtouint (val,0 , (unsigned int *)kp->arg); -pr_warn ("set_dyndbg: result:%d from %s\n" , result, val); + rc =kstrtouint (val,0 , &result); +pr_debug ("set_dyndbg: rc:%d got:%d from %s\n" , rc, result, val);if (result) chgct =dynamic_debug_exec_queries ("module=drm* +p" ,NULL );else chgct =dynamic_debug_exec_queries ("module=drm* -p" ,NULL ); -pr_warn ("change ct:%d\n" , chgct); +pr_debug ("change ct:%d\n" , chgct);return 0 ; }static int param_get_dyndbg (char *buffer,const struct kernel_param *kp)
@@ -297,13 +298,16 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category,struct va_format vaf;va_list args; -if (!drm_debug_enabled (category)) -return ; -va_start (args, format); vaf.fmt = format; vaf.va = &args; +dev_dbg (dev,"[" DRM_NAME ":%ps] Cat:%d %pV" , +__builtin_return_address (0 ), category, &vaf); + +if (!drm_debug_enabled (category)) +return ; +if (dev)dev_printk (KERN_DEBUG , dev,"[" DRM_NAME ":%ps] %pV" ,__builtin_return_address (0 ), &vaf);
@@ -320,13 +324,16 @@ void __drm_dbg(enum drm_debug_category category, const char *format, ...)struct va_format vaf;va_list args; -if (!drm_debug_enabled (category)) -return ; -va_start (args, format); vaf.fmt = format; vaf.va = &args; +pr_debug ("[" DRM_NAME ":%ps] Cat:%d %pV" , +__builtin_return_address (0 ), category, &vaf); + +if (!drm_debug_enabled (category)) +return ; +printk (KERN_DEBUG "[" DRM_NAME ":%ps] %pV" ,__builtin_return_address (0 ), &vaf);
Signature · 1 line
2.26.2
PATCH 3/4 i915: add -DDYNAMIC_DEBUG_MODULE to i915/gvt/Makefile
In reply to Jim CromieThis addition to cflags enables dyndbg in the gvt component of the i915 module, on a CONFIG_DYNAMIC_DEBUG_CORE build.
So here are the message classifications that the gvt driver uses.
cut -d= -f2 | cut -d\ -f2,3 | \
perl -ne 'chomp $_ && $h{$_}++; END{print "$_\" \tseen $h{$_}\n" for sort keys %h}'"gvt: cmd:" seen 11
"gvt: core:" seen 48
"gvt: dpy:" seen 4
"gvt: el:" seen 21
"gvt: irq:" seen 1
"gvt: mm:" seen 6
"gvt: mmio:" seen 9
"gvt: render:" seen 1
"gvt: sched:" seen 15
--- drivers/gpu/drm/i915/gvt/Makefile | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/gvt/Makefile +3 -2
@@ -5,5 +5,6 @@ GVT_SOURCE := gvt.o aperture_gm.o handlers.o vgpu.o trace_points.o firmware.o \ execlist.o scheduler.o sched_policy.o mmio_context.o cmd_parser.o debugfs.o \ fb_decoder.o dmabuf.o page_track.o -ccflags-y += -I $(srctree)/$(src) -I $(srctree)/$(src)/$(GVT_DIR)/ -i915-y += $(addprefix $(GVT_DIR)/, $(GVT_SOURCE)) +ccflags-y += -I $(srctree)/$(src) -I $(srctree)/$(src)/$(GVT_DIR)/ +ccflags-y += -DDYNAMIC_DEBUG_MODULE +i915-y += $(addprefix $(GVT_DIR)/, $(GVT_SOURCE))
Signature · 1 line
2.26.2
PATCH 4/4 i915: POC use dynamic_debug_exec_queries to control pr_debugs in gvt
In reply to Jim CromieThe gvt component of this driver has ~120 pr_debugs, in 9 "classes". Add a "knob", like drm.debug, to map bits to these classes.
bash-5.0# echo 0x01 > /sys/module/i915/parameters/debug_dyn
set_dyndbg: result:0x1 from 0x01
dyndbg: query 0: "format='^gvt: cmd: ' +p"
dyndbg: entry, buf:'format='^gvt: cmd: ' +p'
dyndbg: start-of-word:0 'format='^gvt: cmd: ' +p'
dyndbg: start-of-word:1 ''^gvt: cmd: ' +p'
dyndbg: start-of-word:2 '+p'
dyndbg: split into words: "format" "^gvt: cmd: " "+p"
dyndbg: op='+'
dyndbg: flags=0x1
dyndbg: *flagsp=0x1 *maskp=0xffffffff
dyndbg: key:'format' arg:'^gvt: cmd: '
dyndbg: parsed: func="" file="" module="i915" format="^gvt: cmd: " lineno=0-0
dyndbg: changed drivers/gpu/drm/i915/gvt/cmd_parser.c:3081 [i915]init_cmd_table =p
dyndbg: changed drivers/gpu/drm/i915/gvt/cmd_parser.c:1376 [i915]gen8_check_mi_display_flip =p
dyndbg: changed drivers/gpu/drm/i915/gvt/cmd_parser.c:1373 [i915]gen8_check_mi_display_flip =p
dyndbg: changed drivers/gpu/drm/i915/gvt/cmd_parser.c:745 [i915]parser_exec_state_dump =p
dyndbg: changed drivers/gpu/drm/i915/gvt/cmd_parser.c:744 [i915]parser_exec_state_dump =p
dyndbg: changed drivers/gpu/drm/i915/gvt/cmd_parser.c:742 [i915]parser_exec_state_dump =p
dyndbg: changed drivers/gpu/drm/i915/gvt/cmd_parser.c:733 [i915]parser_exec_state_dump =p
dyndbg: changed drivers/gpu/drm/i915/gvt/cmd_parser.c:729 [i915]parser_exec_state_dump =p
dyndbg: changed drivers/gpu/drm/i915/gvt/cmd_parser.c:722 [i915]parser_exec_state_dump =p
dyndbg: changed drivers/gpu/drm/i915/gvt/cmd_parser.c:716 [i915]parser_exec_state_dump =p
dyndbg: changed drivers/gpu/drm/i915/gvt/cmd_parser.c:691 [i915]print_opcode =p
dyndbg: applied: func="" file="" module="i915" format="^gvt: cmd: " lineno=0-0
dyndbg: processed 1 queries, with 11 matches, 0 errs
change ct:11 on format='gvt: cmd: '
change ct:11
--- drivers/gpu/drm/i915/i915_params.c | 76 ++++++++++++++++++++++++++++++ 1 file changed, 76 insertions(+)
drivers/gpu/drm/i915/i915_params.c +76 -0
@@ -255,3 +255,79 @@ void i915_params_free(struct i915_params *params)I915_PARAMS_FOR_EACH (FREE );#undef FREE } + +/* POC for callback -> dynamic_debug_exec_queries */ +unsigned long __new_knob; +EXPORT_SYMBOL (__new_knob); + +static char *pr_debug_classes[] = { +"gvt: cmd: " , +"gvt: core: " , +"gvt: dpy: " , +"gvt: el: " , +"gvt: irq: " , +"gvt: mm: " , +"gvt: mmio: " , +"gvt: render: " , +"gvt: sched: " +}; +#define NUM_CLASSES ARRAY_SIZE(pr_debug_classes) +#define OUR_QUERY_SIZE 128/* we need about 20 */ + +#include <linux/module.h> + +static int param_set_dyndbg (const char *instr,const struct kernel_param *kp) +{ +static unsigned long int old_val; +unsigned int val; +unsigned long int changes, result; +int rc, chgct =0 , totct =0 , bitpos; +char query[OUR_QUERY_SIZE ]; + + rc =kstrtouint (instr,0 , &val); +if (rc) { +pr_err ("set_dyndbg: failed\n" ); +return -EINVAL ; + } + result = val; +pr_info ("set_dyndbg: result:0x%lx from %s\n" , result, instr); + + changes = result ^ old_val; + +for_each_set_bit (bitpos, &changes,NUM_CLASSES ) { + +sprintf (query,"format='^%s' %cp" , pr_debug_classes[bitpos], +test_bit (bitpos, &result) ?'+' :'-' ); + + chgct =dynamic_debug_exec_queries (query,"i915" ); + totct += chgct; +pr_info ("change ct:%d on format='%s'\n" , chgct, + pr_debug_classes[bitpos]); + } + old_val = result; +pr_info ("change ct:%d\n" , totct); +return 0 ; +} +static int param_get_dyndbg (char *buffer,const struct kernel_param *kp) +{ +return scnprintf (buffer,PAGE_SIZE ,"%u\n" , + *((unsigned int *)kp->arg)); +} +static const struct kernel_param_ops param_ops_dyndbg = { + .set = param_set_dyndbg, + .get = param_get_dyndbg, +}; + +MODULE_PARM_DESC (debug_dyn," enable dynamic-debug by format-string classifications.\n" +"\t\twhich are:" +"\n\t\t gvt: cmd:" +"\n\t\t gvt: core:" +"\n\t\t gvt: dpy:" +"\n\t\t gvt: el:" +"\n\t\t gvt: irq:" +"\n\t\t gvt: mm:" +"\n\t\t gvt: mmio:" +"\n\t\t gvt: render:" +"\n\t\t gvt: sched:" "\n" ); + +module_param_cb (debug_dyn, ¶m_ops_dyndbg, &__new_knob,0644 );
Signature · 1 line
2.26.2
kernel test robot
build botRe: [PATCH 4/4] i915: POC use dynamic_debug_exec_queries to control pr_debugs in gvt
I love your patch! Yet something to improve:
Hi Jim,
I love your patch! Yet something to improve:
[auto build test ERROR on drm-intel/for-linux-next]
[also build test ERROR on linux/master tegra-drm/drm/tegra/for-next drm-tip/drm-tip linus/master v5.9-rc2 next-20200826] [cannot apply to drm/drm-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Jim-Cromie/dyndbg-POC-use-dynamic_debug_exec_queries-in-DRM/20200827-010409 base: git://anongit.freedesktop.org/drm-intel for-linux-next config: x86_64-allyesconfig (attached as .config) compiler: gcc-9 (Debian 9.3.0-15) 9.3.0 reproduce (this is a W=1 build): # save the attached .config to linux build tree make W=1 ARCH=x86_64
If you fix the issue, kindly add following tag as appropriate
All errors (new ones prefixed by >>):
drivers/gpu/drm/i915/i915_params.c: In function 'param_set_dyndbg':
>> drivers/gpu/drm/i915/i915_params.c:307:11: error: implicit declaration of function 'dynamic_debug_exec_queries' [-Werror=implicit-function-declaration]
307 | chgct = dynamic_debug_exec_queries(query, "i915");
| ^~~~~~~~~~~~~~~~~~~~~~~~~~cc1: some warnings being treated as errors
# https://github.com/0day-ci/linux/commit/1b9bcd2cceed427d96bc9bf4eae6619201d645d6
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Jim-Cromie/dyndbg-POC-use-dynamic_debug_exec_queries-in-DRM/20200827-010409 git checkout 1b9bcd2cceed427d96bc9bf4eae6619201d645d6
vim +/dynamic_debug_exec_queries +307 drivers/gpu/drm/i915/i915_params.c
283
284 static int param_set_dyndbg(const char *instr, const struct kernel_param *kp)
285 {
286 static unsigned long int old_val;
287 unsigned int val;
288 unsigned long int changes, result;
289 int rc, chgct = 0, totct = 0, bitpos;
290 char query[OUR_QUERY_SIZE];
291
292 rc = kstrtouint(instr, 0, &val);
293 if (rc) {
294 pr_err("set_dyndbg: failed\n");
295 return -EINVAL;
296 }
297 result = val;
298 pr_info("set_dyndbg: result:0x%lx from %s\n", result, instr);
299
300 changes = result ^ old_val;
301
302 for_each_set_bit(bitpos, &changes, NUM_CLASSES) {
303
304 sprintf(query, "format='^%s' %cp", pr_debug_classes[bitpos],
305 test_bit(bitpos, &result) ? '+' : '-');
306
> 307 chgct = dynamic_debug_exec_queries(query, "i915");
308 totct += chgct;
309 pr_info("change ct:%d on format='%s'\n", chgct,
310 pr_debug_classes[bitpos]);
311 }
312 old_val = result;
313 pr_info("change ct:%d\n", totct);
314 return 0;
315 }
316 static int param_get_dyndbg(char *buffer, const struct kernel_param *kp)
317 {
318 return scnprintf(buffer, PAGE_SIZE, "%u\n",
319 *((unsigned int *)kp->arg));
320 }
321 static const struct kernel_param_ops param_ops_dyndbg = {
322 .set = param_set_dyndbg,
323 .get = param_get_dyndbg,
324 };
325
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org