spi: sprd: Release DMA channel also on probe deferral
Subsystems (13)
PATCH 2/11 spi: sprd: Simplify with dev_err_probe()
In reply to Krzysztof KozlowskiCommon pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed.
--- drivers/spi/spi-sprd-adi.c | 5 +---- drivers/spi/spi-sprd.c | 17 +++++------------ 2 files changed, 6 insertions(+), 16 deletions(-)
drivers/spi/spi-sprd-adi.c +1 -4
@@ -504,10 +504,7 @@ static int sprd_adi_probe(struct platform_device *pdev)dev_info (&pdev->dev,"no hardware spinlock supplied\n" );break ;default : -dev_err (&pdev->dev, -"failed to find hwlock id, %d\n" , ret); - fallthrough; -case -EPROBE_DEFER : +dev_err_probe (&pdev->dev, ret,"failed to find hwlock id\n" ); goto put_ctlr; } }
drivers/spi/spi-sprd.c +5 -12
@@ -553,22 +553,15 @@ static int sprd_spi_dma_tx_config(struct sprd_spi *ss, struct spi_transfer *t)static int sprd_spi_dma_request (struct sprd_spi *ss) { ss->dma.dma_chan[SPRD_SPI_RX ] =dma_request_chan (ss->dev,"rx_chn" ); -if (IS_ERR_OR_NULL (ss->dma.dma_chan[SPRD_SPI_RX ])) { -if (PTR_ERR (ss->dma.dma_chan[SPRD_SPI_RX ]) == -EPROBE_DEFER ) -return PTR_ERR (ss->dma.dma_chan[SPRD_SPI_RX ]); - -dev_err (ss->dev,"request RX DMA channel failed!\n" ); -return PTR_ERR (ss->dma.dma_chan[SPRD_SPI_RX ]); - } +if (IS_ERR_OR_NULL (ss->dma.dma_chan[SPRD_SPI_RX ])) +return dev_err_probe (ss->dev,PTR_ERR (ss->dma.dma_chan[SPRD_SPI_RX ]), +"request RX DMA channel failed!\n" ); ss->dma.dma_chan[SPRD_SPI_TX ] =dma_request_chan (ss->dev,"tx_chn" );if (IS_ERR_OR_NULL (ss->dma.dma_chan[SPRD_SPI_TX ])) {dma_release_channel (ss->dma.dma_chan[SPRD_SPI_RX ]); -if (PTR_ERR (ss->dma.dma_chan[SPRD_SPI_TX ]) == -EPROBE_DEFER ) -return PTR_ERR (ss->dma.dma_chan[SPRD_SPI_TX ]); - -dev_err (ss->dev,"request TX DMA channel failed!\n" ); -return PTR_ERR (ss->dma.dma_chan[SPRD_SPI_TX ]); +return dev_err_probe (ss->dev,PTR_ERR (ss->dma.dma_chan[SPRD_SPI_TX ]), +"request TX DMA channel failed!\n" ); }return 0 ;
Signature · 1 line
2.17.1
PATCH 8/11 spi: stm32: Simplify with dev_err_probe()
In reply to Krzysztof KozlowskiCommon pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed.
--- drivers/spi/spi-stm32.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/spi/spi-stm32.c +1 -3
@@ -1857,9 +1857,7 @@ static int stm32_spi_probe(struct platform_device *pdev) spi->irq =platform_get_irq (pdev,0 );if (spi->irq <=0 ) { - ret = spi->irq; -if (ret != -EPROBE_DEFER ) -dev_err (&pdev->dev,"failed to get irq: %d\n" , ret); + ret =dev_err_probe (&pdev->dev, spi->irq,"failed to get irq\n" ); goto err_master_put; } ret = devm_request_threaded_irq(&pdev->dev, spi->irq,
Signature · 1 line
2.17.1
PATCH 1/11 spi: sprd: Release DMA channel also on probe deferral
If dma_request_chan() for TX channel fails with EPROBE_DEFER, the RX channel would not be released and on next re-probe it would be requested second time.
--- drivers/spi/spi-sprd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/spi/spi-sprd.c +1 -1
@@ -563,11 +563,11 @@ static int sprd_spi_dma_request(struct sprd_spi *ss) ss->dma.dma_chan[SPRD_SPI_TX ] =dma_request_chan (ss->dev,"tx_chn" );if (IS_ERR_OR_NULL (ss->dma.dma_chan[SPRD_SPI_TX ])) { +dma_release_channel (ss->dma.dma_chan[SPRD_SPI_RX ]);if (PTR_ERR (ss->dma.dma_chan[SPRD_SPI_TX ]) == -EPROBE_DEFER )return PTR_ERR (ss->dma.dma_chan[SPRD_SPI_TX ]);dev_err (ss->dev,"request TX DMA channel failed!\n" ); -dma_release_channel (ss->dma.dma_chan[SPRD_SPI_RX ]);return PTR_ERR (ss->dma.dma_chan[SPRD_SPI_TX ]); }
Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 3/11 spi: atmel: Simplify with dev_err_probe()
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed.
--- drivers/spi/spi-atmel.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/spi/spi-atmel.c +2 -3
@@ -513,9 +513,8 @@ static int atmel_spi_configure_dma(struct spi_master *master, master->dma_tx =dma_request_chan (dev,"tx" );if (IS_ERR (master->dma_tx)) { - err =PTR_ERR (master->dma_tx); -if (err != -EPROBE_DEFER ) -dev_err (dev,"No TX DMA channel, DMA is disabled\n" ); + err =dev_err_probe (dev,PTR_ERR (master->dma_tx), +"No TX DMA channel, DMA is disabled\n" ); goto error_clear; }
Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 4/11 spi: bcm2835: Simplify with dev_err_probe()
In reply to Krzysztof KozlowskiCommon pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed.
--- drivers/spi/spi-bcm2835.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)
drivers/spi/spi-bcm2835.c +2 -5
@@ -1319,11 +1319,8 @@ static int bcm2835_spi_probe(struct platform_device *pdev) bs->clk =devm_clk_get (&pdev->dev,NULL );if (IS_ERR (bs->clk)) { - err =PTR_ERR (bs->clk); -if (err == -EPROBE_DEFER ) -dev_dbg (&pdev->dev,"could not get clk: %d\n" , err); -else -dev_err (&pdev->dev,"could not get clk: %d\n" , err); + err =dev_err_probe (&pdev->dev,PTR_ERR (bs->clk), +"could not get clk\n" ); goto out_controller_put; }
Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 5/11 spi: cadence-quadspi: Simplify with dev_err_probe()
In reply to Krzysztof KozlowskiCommon pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed.
--- drivers/spi/spi-cadence-quadspi.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
drivers/spi/spi-cadence-quadspi.c +1 -4
@@ -1117,11 +1117,8 @@ static int cqspi_request_mmap_dma(struct cqspi_st *cqspi) cqspi->rx_chan =dma_request_chan_by_mask (&mask);if (IS_ERR (cqspi->rx_chan)) {int ret =PTR_ERR (cqspi->rx_chan); - -if (ret != -EPROBE_DEFER ) -dev_err (&cqspi->pdev->dev,"No Rx DMA available\n" ); cqspi->rx_chan =NULL ; -return ret; +return dev_err_probe (&cqspi->pdev->dev, ret,"No Rx DMA available\n" ); }init_completion (&cqspi->rx_dma_complete);
Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 6/11 spi: spi-mux: Simplify with dev_err_probe()
In reply to Krzysztof KozlowskiCommon pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed.
--- drivers/spi/spi-mux.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/spi/spi-mux.c +2 -3
@@ -139,9 +139,8 @@ static int spi_mux_probe(struct spi_device *spi) priv->mux =devm_mux_control_get (&spi->dev,NULL );if (IS_ERR (priv->mux)) { - ret =PTR_ERR (priv->mux); -if (ret != -EPROBE_DEFER ) -dev_err (&spi->dev,"failed to get control-mux\n" ); + ret =dev_err_probe (&spi->dev,PTR_ERR (priv->mux), +"failed to get control-mux\n" ); goto err_put_ctlr; }
Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 7/11 spi: qcom-qspi: Simplify with dev_err_probe()
In reply to Krzysztof KozlowskiCommon pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed.
--- drivers/spi/spi-qcom-qspi.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/spi/spi-qcom-qspi.c +2 -3
@@ -495,9 +495,8 @@ static int qcom_qspi_probe(struct platform_device *pdev) ctrl->icc_path_cpu_to_qspi =devm_of_icc_get (dev,"qspi-config" );if (IS_ERR (ctrl->icc_path_cpu_to_qspi)) { - ret =PTR_ERR (ctrl->icc_path_cpu_to_qspi); -if (ret != -EPROBE_DEFER ) -dev_err (dev,"Failed to get cpu path: %d\n" , ret); + ret =dev_err_probe (dev,PTR_ERR (ctrl->icc_path_cpu_to_qspi), +"Failed to get cpu path\n" ); goto exit_probe_master_put; }/* Set BW vote for register access */
Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 9/11 spi: synquacer: Simplify with dev_err_probe()
In reply to Krzysztof KozlowskiCommon pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed.
--- drivers/spi/spi-synquacer.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/spi/spi-synquacer.c +2 -3
@@ -640,9 +640,8 @@ static int synquacer_spi_probe(struct platform_device *pdev) }if (IS_ERR (sspi->clk)) { -if (!(PTR_ERR (sspi->clk) == -EPROBE_DEFER )) -dev_err (&pdev->dev,"clock not found\n" ); - ret =PTR_ERR (sspi->clk); + ret =dev_err_probe (&pdev->dev,PTR_ERR (sspi->clk), +"clock not found\n" ); goto put_spi; }
Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 10/11 spi: tegra114: Simplify with dev_err_probe()
In reply to Krzysztof KozlowskiCommon pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed.
--- drivers/spi/spi-tegra114.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-)
drivers/spi/spi-tegra114.c +3 -8
@@ -664,16 +664,11 @@ static int tegra_spi_init_dma_param(struct tegra_spi_data *tspi,struct dma_chan *dma_chan;u32 *dma_buf;dma_addr_t dma_phys; -int ret; dma_chan =dma_request_chan (tspi->dev, dma_to_memory ?"rx" :"tx" ); -if (IS_ERR (dma_chan)) { - ret =PTR_ERR (dma_chan); -if (ret != -EPROBE_DEFER ) -dev_err (tspi->dev, -"Dma channel is not available: %d\n" , ret); -return ret; - } +if (IS_ERR (dma_chan)) +return dev_err_probe (tspi->dev,PTR_ERR (dma_chan), +"Dma channel is not available\n" ); dma_buf =dma_alloc_coherent (tspi->dev, tspi->dma_buf_size, &dma_phys,GFP_KERNEL );
Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 11/11 spi: tegra20: Simplify with dev_err_probe()
In reply to Krzysztof KozlowskiCommon pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed.
--- drivers/spi/spi-tegra20-slink.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-)
drivers/spi/spi-tegra20-slink.c +3 -7
@@ -600,13 +600,9 @@ static int tegra_slink_init_dma_param(struct tegra_slink_data *tspi,struct dma_slave_config dma_sconfig; dma_chan =dma_request_chan (tspi->dev, dma_to_memory ?"rx" :"tx" ); -if (IS_ERR (dma_chan)) { - ret =PTR_ERR (dma_chan); -if (ret != -EPROBE_DEFER ) -dev_err (tspi->dev, -"Dma channel is not available: %d\n" , ret); -return ret; - } +if (IS_ERR (dma_chan)) +return dev_err_probe (tspi->dev,PTR_ERR (dma_chan), +"Dma channel is not available\n" ); dma_buf =dma_alloc_coherent (tspi->dev, tspi->dma_buf_size, &dma_phys,GFP_KERNEL );
Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 04/11] spi: bcm2835: Simplify with dev_err_probe()
In reply to Krzysztof KozlowskiQuoted 4 lines · Krzysztof Kozlowski
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.Signed-off-by Krzysztof Kozlowski <[email protected]>
Signature · 1 line
Florian
Re: [PATCH 03/11] spi: atmel: Simplify with dev_err_probe()
In reply to Krzysztof KozlowskiQuoted 4 lines · Krzysztof Kozlowski
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.Signed-off-by Krzysztof Kozlowski <[email protected]>
Quoted 23 lines
--- drivers/spi/spi-atmel.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)drivers/spi/spi-atmel.c +2
-3@@ -513,9 +513,8 @@ static int atmel_spi_configure_dma(struct spi_master *master, master->dma_tx =dma_request_chan (dev,"tx" );if (IS_ERR (master->dma_tx)) { - err =PTR_ERR (master->dma_tx); -if (err != -EPROBE_DEFER ) -dev_err (dev,"No TX DMA channel, DMA is disabled\n" ); + err =dev_err_probe (dev,PTR_ERR (master->dma_tx), +"No TX DMA channel, DMA is disabled\n" ); goto error_clear; }Signature · 1 line
2.17.1
Signature · 3 lines
Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
Quoted 8 lines · Krzysztof Kozlowski
If
dma_request_chan()for TX channel fails withEPROBE_DEFER, the RX channel would not be released and on next re-probe it would be requested second time.Fixes 386119bc7be9 ("spi: sprd: spi: sprd: Add DMA mode support")Cc <[email protected]>Signed-off-by Krzysztof Kozlowski <[email protected]>
Thanks,
Chunyan
Quoted 24 lines
--- drivers/spi/spi-sprd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/spi/spi-sprd.c +1
-2@@ -563,11 +563,11 @@ static int sprd_spi_dma_request(struct sprd_spi *ss) ss->dma.dma_chan[SPRD_SPI_TX ] =dma_request_chan (ss->dev,"tx_chn" );if (IS_ERR_OR_NULL (ss->dma.dma_chan[SPRD_SPI_TX ])) { +dma_release_channel (ss->dma.dma_chan[SPRD_SPI_RX ]);if (PTR_ERR (ss->dma.dma_chan[SPRD_SPI_TX ]) == -EPROBE_DEFER )return PTR_ERR (ss->dma.dma_chan[SPRD_SPI_TX ]);dev_err (ss->dev,"request TX DMA channel failed!\n" ); -dma_release_channel (ss->dma.dma_chan[SPRD_SPI_RX ]);return PTR_ERR (ss->dma.dma_chan[SPRD_SPI_TX ]); } --2.17.1
Re: [PATCH 02/11] spi: sprd: Simplify with dev_err_probe()
In reply to Krzysztof KozlowskiQuoted 5 lines · Krzysztof Kozlowski
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.Signed-off-by Krzysztof Kozlowski <[email protected]>
Thanks,
Chunyan
Quoted 56 lines
--- drivers/spi/spi-sprd-adi.c | 5 +---- drivers/spi/spi-sprd.c | 17 +++++------------ 2 files changed, 6 insertions(+), 16 deletions(-)drivers/spi/spi-sprd-adi.c +1
-4@@ -504,10 +504,7 @@ static int sprd_adi_probe(struct platform_device *pdev)dev_info (&pdev->dev,"no hardware spinlock supplied\n" );break ;default : -dev_err (&pdev->dev, -"failed to find hwlock id, %d\n" , ret); - fallthrough; -case -EPROBE_DEFER : +dev_err_probe (&pdev->dev, ret,"failed to find hwlock id\n" ); goto put_ctlr; } }drivers/spi/spi-sprd.c +5
-13@@ -553,22 +553,15 @@ static int sprd_spi_dma_tx_config(struct sprd_spi *ss, struct spi_transfer *t)static int sprd_spi_dma_request (struct sprd_spi *ss) { ss->dma.dma_chan[SPRD_SPI_RX ] =dma_request_chan (ss->dev,"rx_chn" ); -if (IS_ERR_OR_NULL (ss->dma.dma_chan[SPRD_SPI_RX ])) { -if (PTR_ERR (ss->dma.dma_chan[SPRD_SPI_RX ]) == -EPROBE_DEFER ) -return PTR_ERR (ss->dma.dma_chan[SPRD_SPI_RX ]); - -dev_err (ss->dev,"request RX DMA channel failed!\n" ); -return PTR_ERR (ss->dma.dma_chan[SPRD_SPI_RX ]); - } +if (IS_ERR_OR_NULL (ss->dma.dma_chan[SPRD_SPI_RX ])) +return dev_err_probe (ss->dev,PTR_ERR (ss->dma.dma_chan[SPRD_SPI_RX ]), +"request RX DMA channel failed!\n" ); ss->dma.dma_chan[SPRD_SPI_TX ] =dma_request_chan (ss->dev,"tx_chn" );if (IS_ERR_OR_NULL (ss->dma.dma_chan[SPRD_SPI_TX ])) {dma_release_channel (ss->dma.dma_chan[SPRD_SPI_RX ]); -if (PTR_ERR (ss->dma.dma_chan[SPRD_SPI_TX ]) == -EPROBE_DEFER ) -return PTR_ERR (ss->dma.dma_chan[SPRD_SPI_TX ]); - -dev_err (ss->dev,"request TX DMA channel failed!\n" ); -return PTR_ERR (ss->dma.dma_chan[SPRD_SPI_TX ]); +return dev_err_probe (ss->dev,PTR_ERR (ss->dma.dma_chan[SPRD_SPI_TX ]), +"request TX DMA channel failed!\n" ); }return 0 ; --2.17.1
Mark Brown
maintainerRe: [PATCH 02/11] spi: sprd: Simplify with dev_err_probe()
In reply to Krzysztof KozlowskiQuoted 2 lines · Krzysztof Kozlowski
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
This doesn't apply against current code, please check and resend.
Applying: spi: sprd: Simplify with dev_err_probe() Using index info to reconstruct a base tree...
M drivers/spi/spi-sprd-adi.c
Falling back to patching base and 3-way merge... Auto-merging drivers/spi/spi-sprd-adi.c
CONFLICT (content): Merge conflict in drivers/spi/spi-sprd-adi.c
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 08/11] spi: stm32: Simplify with dev_err_probe()
In reply to Krzysztof KozlowskiQuoted 4 lines · Krzysztof Kozlowski
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.Signed-off-by Krzysztof Kozlowski <[email protected]>
Quoted 22 lines
--- drivers/spi/spi-stm32.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)drivers/spi/spi-stm32.c +1
-3@@ -1857,9 +1857,7 @@ static int stm32_spi_probe(struct platform_device *pdev) spi->irq =platform_get_irq (pdev,0 );if (spi->irq <=0 ) { - ret = spi->irq; -if (ret != -EPROBE_DEFER ) -dev_err (&pdev->dev,"failed to get irq: %d\n" , ret); + ret =dev_err_probe (&pdev->dev, spi->irq,"failed to get irq\n" ); goto err_master_put; } ret = devm_request_threaded_irq(&pdev->dev, spi->irq,Signature · 1 line
2.17.1
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Mark Brown
maintainerQuoted 3 lines · Krzysztof Kozlowski
If
dma_request_chan()for TX channel fails withEPROBE_DEFER, the RX channel would not be released and on next re-probe it would be requested second time.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
Thanks!
[01/11] spi: sprd: Release DMA channel also on probe deferral
commit: 687a2e76186dcfa42f22c14b655c3fb159839e79
[02/11] spi: sprd: Simplify with dev_err_probe()
(no commit info)
[03/11] spi: atmel: Simplify with dev_err_probe()
commit: 96189475820835d7176171492640a58c600aca42
[04/11] spi: bcm2835: Simplify with dev_err_probe()
commit: 65acd82c4eb7f08747922ed3afb2d099a1b25d3f
[05/11] spi: cadence-quadspi: Simplify with dev_err_probe()
commit: 436a5c208037a71f64f35312969e27a05d6d7c53
[06/11] spi: spi-mux: Simplify with dev_err_probe()
commit: 2d9bdf645584d15ed1d4aae6204cb6ea8b673d48
[07/11] spi: qcom-qspi: Simplify with dev_err_probe()
commit: 034532681c56cfffaea169a59155fe11e9172d9c
[08/11] spi: stm32: Simplify with dev_err_probe()
commit: a05cec2dc2df1e5d25addb7aba398f3eb451e163
[09/11] spi: synquacer: Simplify with dev_err_probe()
commit: 74ee6dc1257edf5fcfba67fd8075b766d11c42a0
[10/11] spi: tegra114: Simplify with dev_err_probe()
commit: 68fffc191ed19ea5618285b128e6048d1536e680
[11/11] spi: tegra20: Simplify with dev_err_probe()
commit: 7708aff1e2ebc8fdccdd61cf9ab8576a66989166All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark