Skip to contentSkip to conversation

DP83869 Feature additions

PATCH Superseded Dan Murphy 3 participants 7 messages Sep 2, 2020 – Sep 3, 2020

Subsystems (3)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Dan Murphy

author
#0 lore raw

v2 cover DP83869 Feature additions

Hello

Adding features to the DP83869 PHY. These features are also supported in other TI PHYs like the DP83867 and DP83822.

Fiber Advertisement: (This is v2 fixing the return of phy_modify) The DP83869 supports a 100Base-FX connection. When this mode is selected the driver needs to advertise that this PHY supports fiber.

WoL:
The PHY also supports Wake on Lan feature with SecureOn password.

Downshift:
Speed optimization or AKA downshift is also supported by this PHY.

Dan Murphy (3):
net: dp83869: Add ability to advertise Fiber connection
net: phy: dp83869: support Wake on LAN
net: dp83869: Add speed optimization feature

 drivers/net/phy/dp83869.c | 280 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 280 insertions(+)
Signature · 1 line
2.28.0
author
#1 lore raw

PATCH v2 1/3 net: dp83869: Add ability to advertise Fiber connection

Add the ability to advertise the Fiber connection if the strap or the op-mode is configured for 100Base-FX.

Auto negotiation is not supported on this PHY when in fiber mode.

---
 drivers/net/phy/dp83869.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)
drivers/net/phy/dp83869.c +36 -0
index 58103152c601..48a68474f89c 100644
@@ -52,6 +52,11 @@
 					 BMCR_FULLDPLX | \
 					 BMCR_SPEED1000)
 
+#define MII_DP83869_FIBER_ADVERTISE    (ADVERTISED_TP | ADVERTISED_MII | \
+					ADVERTISED_FIBRE | ADVERTISED_BNC |  \
+					ADVERTISED_Pause | ADVERTISED_Asym_Pause | \
+					ADVERTISED_100baseT_Full)
+
 /* This is the same bit mask as the BMCR so re-use the BMCR default */
 #define DP83869_FX_CTRL_DEFAULT	MII_DP83869_BMCR_DEFAULT
 
@@ -300,6 +305,7 @@ static int dp83869_configure_mode(struct phy_device *phydev,
 {
 	int phy_ctrl_val;
 	int ret;
+	int bmcr;
 
 	if (dp83869->mode < DP83869_RGMII_COPPER_ETHERNET ||
 	    dp83869->mode > DP83869_SGMII_COPPER_ETHERNET)
@@ -383,7 +389,37 @@ static int dp83869_configure_mode(struct phy_device *phydev,
 
 		break;
 	case DP83869_RGMII_1000_BASE:
+		break;
 	case DP83869_RGMII_100_BASE:
+		/* Only allow advertising what this PHY supports */
+		linkmode_and(phydev->advertising, phydev->advertising,
+			     phydev->supported);
+
+		linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT,
+				 phydev->supported);
+		linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT,
+				 phydev->advertising);
+
+		/* Auto neg is not supported in fiber mode */
+		bmcr = phy_read(phydev, MII_BMCR);
+		if (bmcr < 0)
+			return bmcr;
+
+		phydev->autoneg = AUTONEG_DISABLE;
+		linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
+				   phydev->supported);
+		linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
+				   phydev->advertising);
+
+		if (bmcr & BMCR_ANENABLE) {
+			ret =  phy_modify(phydev, MII_BMCR, BMCR_ANENABLE, 0);
+			if (ret < 0)
+				return ret;
+		}
+
+		phy_modify_changed(phydev, MII_ADVERTISE,
+				   MII_DP83869_FIBER_ADVERTISE,
+				   MII_DP83869_FIBER_ADVERTISE);
 		break;
 	default:
 		return -EINVAL;
Signature · 1 line
2.28.0
author
#3 lore raw

PATCH v2 3/3 net: dp83869: Add speed optimization feature

In reply to Dan Murphy

Set the speed optimization bit on the DP83869 PHY.

Speed optimization, also known as link downshift, enables fallback to 100M operation after multiple consecutive failed attempts at Gigabit link establishment. Such a case could occur if cabling with only four wires (two twisted pairs) were connected instead of the standard cabling with eight wires (four twisted pairs).

The number of failed link attempts before falling back to 100M operation is configurable. By default, four failed link attempts are required before falling back to 100M.

---
 drivers/net/phy/dp83869.c | 116 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 116 insertions(+)
drivers/net/phy/dp83869.c +116 -0
index 5045df9515a5..06a228dac92b 100644
@@ -11,6 +11,7 @@
 #include <linux/of.h>
 #include <linux/phy.h>
 #include <linux/delay.h>
+#include <linux/bitfield.h>
 
 #include <dt-bindings/net/ti-dp83869.h>
 
@@ -20,6 +21,7 @@
 #define MII_DP83869_PHYCTRL	0x10
 #define MII_DP83869_MICR	0x12
 #define MII_DP83869_ISR		0x13
+#define DP83869_CFG2		0x14
 #define DP83869_CTRL		0x1f
 #define DP83869_CFG4		0x1e
 
@@ -121,6 +123,18 @@
 #define DP83869_WOL_SEC_EN		BIT(5)
 #define DP83869_WOL_ENH_MAC		BIT(7)
 
+/* CFG2 bits */
+#define DP83869_DOWNSHIFT_EN		(BIT(8) | BIT(9))
+#define DP83869_DOWNSHIFT_ATTEMPT_MASK	(BIT(10) | BIT(11))
+#define DP83869_DOWNSHIFT_1_COUNT_VAL	0
+#define DP83869_DOWNSHIFT_2_COUNT_VAL	1
+#define DP83869_DOWNSHIFT_4_COUNT_VAL	2
+#define DP83869_DOWNSHIFT_8_COUNT_VAL	3
+#define DP83869_DOWNSHIFT_1_COUNT	1
+#define DP83869_DOWNSHIFT_2_COUNT	2
+#define DP83869_DOWNSHIFT_4_COUNT	4
+#define DP83869_DOWNSHIFT_8_COUNT	8
+
 enum {
 	DP83869_PORT_MIRRORING_KEEP,
 	DP83869_PORT_MIRRORING_EN,
@@ -281,6 +295,99 @@ static void dp83869_get_wol(struct phy_device *phydev,
 		wol->wolopts = 0;
 }
 
+static int dp83869_get_downshift(struct phy_device *phydev, u8 *data)
+{
+	int val, cnt, enable, count;
+
+	val = phy_read(phydev, DP83869_CFG2);
+	if (val < 0)
+		return val;
+
+	enable = FIELD_GET(DP83869_DOWNSHIFT_EN, val);
+	cnt = FIELD_GET(DP83869_DOWNSHIFT_ATTEMPT_MASK, val);
+
+	switch (cnt) {
+	case DP83869_DOWNSHIFT_1_COUNT_VAL:
+		count = DP83869_DOWNSHIFT_1_COUNT;
+		break;
+	case DP83869_DOWNSHIFT_2_COUNT_VAL:
+		count = DP83869_DOWNSHIFT_2_COUNT;
+		break;
+	case DP83869_DOWNSHIFT_4_COUNT_VAL:
+		count = DP83869_DOWNSHIFT_4_COUNT;
+		break;
+	case DP83869_DOWNSHIFT_8_COUNT_VAL:
+		count = DP83869_DOWNSHIFT_8_COUNT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	*data = enable ? count : DOWNSHIFT_DEV_DISABLE;
+
+	return 0;
+}
+
+static int dp83869_set_downshift(struct phy_device *phydev, u8 cnt)
+{
+	int val, count;
+
+	if (cnt > DP83869_DOWNSHIFT_8_COUNT)
+		return -E2BIG;
+
+	if (!cnt)
+		return phy_clear_bits(phydev, DP83869_CFG2,
+				      DP83869_DOWNSHIFT_EN);
+
+	switch (cnt) {
+		case DP83869_DOWNSHIFT_1_COUNT:
+			count = DP83869_DOWNSHIFT_1_COUNT_VAL;
+			break;
+		case DP83869_DOWNSHIFT_2_COUNT:
+			count = DP83869_DOWNSHIFT_2_COUNT_VAL;
+			break;
+		case DP83869_DOWNSHIFT_4_COUNT:
+			count = DP83869_DOWNSHIFT_4_COUNT_VAL;
+			break;
+		case DP83869_DOWNSHIFT_8_COUNT:
+			count = DP83869_DOWNSHIFT_8_COUNT_VAL;
+			break;
+		default:
+			phydev_err(phydev,
+				   "Downshift count must be 1, 2, 4 or 8\n");
+			return -EINVAL;
+	}
+
+	val = DP83869_DOWNSHIFT_EN;
+	val |= FIELD_PREP(DP83869_DOWNSHIFT_ATTEMPT_MASK, count);
+
+	return phy_modify(phydev, DP83869_CFG2,
+			  DP83869_DOWNSHIFT_EN | DP83869_DOWNSHIFT_ATTEMPT_MASK,
+			  val);
+}
+
+static int dp83869_get_tunable(struct phy_device *phydev,
+				struct ethtool_tunable *tuna, void *data)
+{
+	switch (tuna->id) {
+	case ETHTOOL_PHY_DOWNSHIFT:
+		return dp83869_get_downshift(phydev, data);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int dp83869_set_tunable(struct phy_device *phydev,
+				struct ethtool_tunable *tuna, const void *data)
+{
+	switch (tuna->id) {
+	case ETHTOOL_PHY_DOWNSHIFT:
+		return dp83869_set_downshift(phydev, *(const u8 *)data);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
 static int dp83869_config_port_mirroring(struct phy_device *phydev)
 {
 	struct dp83869_private *dp83869 = phydev->priv;
@@ -558,6 +665,12 @@ static int dp83869_config_init(struct phy_device *phydev)
 	struct dp83869_private *dp83869 = phydev->priv;
 	int ret, val;
 
+       /* Force speed optimization for the PHY even if it strapped */
+       ret = phy_modify(phydev, DP83869_CFG2, DP83869_DOWNSHIFT_EN,
+                        DP83869_DOWNSHIFT_EN);
+       if (ret)
+               return ret;
+
 	ret = dp83869_configure_mode(phydev, dp83869);
 	if (ret)
 		return ret;
@@ -656,6 +769,9 @@ static struct phy_driver dp83869_driver[] = {
 		.ack_interrupt	= dp83869_ack_interrupt,
 		.config_intr	= dp83869_config_intr,
 
+		.get_tunable	= dp83869_get_tunable,
+		.set_tunable	= dp83869_set_tunable,
+
 		.get_wol	= dp83869_get_wol,
 		.set_wol	= dp83869_set_wol,
 
Signature · 1 line
2.28.0
author
#2 lore raw

PATCH v2 2/3 net: phy: dp83869: support Wake on LAN

In reply to Dan Murphy

This adds WoL support on TI DP83869 for magic, magic secure, unicast and broadcast.

---
 drivers/net/phy/dp83869.c | 128 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 128 insertions(+)
drivers/net/phy/dp83869.c +128 -0
index 48a68474f89c..5045df9515a5 100644
@@ -4,6 +4,7 @@
  */
 
 #include <linux/ethtool.h>
+#include <linux/etherdevice.h>
 #include <linux/kernel.h>
 #include <linux/mii.h>
 #include <linux/module.h>
@@ -27,6 +28,13 @@
 #define DP83869_RGMIICTL	0x0032
 #define DP83869_STRAP_STS1	0x006e
 #define DP83869_RGMIIDCTL	0x0086
+#define DP83869_RXFCFG		0x0134
+#define DP83869_RXFPMD1		0x0136
+#define DP83869_RXFPMD2		0x0137
+#define DP83869_RXFPMD3		0x0138
+#define DP83869_RXFSOP1		0x0139
+#define DP83869_RXFSOP2		0x013A
+#define DP83869_RXFSOP3		0x013B
 #define DP83869_IO_MUX_CFG	0x0170
 #define DP83869_OP_MODE		0x01df
 #define DP83869_FX_CTRL		0x0c00
@@ -105,6 +113,14 @@
 #define DP83869_OP_MODE_MII			BIT(5)
 #define DP83869_SGMII_RGMII_BRIDGE		BIT(6)
 
+/* RXFCFG bits*/
+#define DP83869_WOL_MAGIC_EN		BIT(0)
+#define DP83869_WOL_PATTERN_EN		BIT(1)
+#define DP83869_WOL_BCAST_EN		BIT(2)
+#define DP83869_WOL_UCAST_EN		BIT(4)
+#define DP83869_WOL_SEC_EN		BIT(5)
+#define DP83869_WOL_ENH_MAC		BIT(7)
+
 enum {
 	DP83869_PORT_MIRRORING_KEEP,
 	DP83869_PORT_MIRRORING_EN,
@@ -156,6 +172,115 @@ static int dp83869_config_intr(struct phy_device *phydev)
 	return phy_write(phydev, MII_DP83869_MICR, micr_status);
 }
 
+static int dp83869_set_wol(struct phy_device *phydev,
+			   struct ethtool_wolinfo *wol)
+{
+	struct net_device *ndev = phydev->attached_dev;
+	u16 val_rxcfg, val_micr;
+	u8 *mac;
+
+	val_rxcfg = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_RXFCFG);
+	val_micr = phy_read(phydev, MII_DP83869_MICR);
+
+	if (wol->wolopts & (WAKE_MAGIC | WAKE_MAGICSECURE | WAKE_UCAST |
+			    WAKE_BCAST)) {
+		val_rxcfg |= DP83869_WOL_ENH_MAC;
+		val_micr |= MII_DP83869_MICR_WOL_INT_EN;
+
+		if (wol->wolopts & WAKE_MAGIC) {
+			mac = (u8 *)ndev->dev_addr;
+
+			if (!is_valid_ether_addr(mac))
+				return -EINVAL;
+
+			phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_RXFPMD1,
+				      (mac[1] << 8 | mac[0]));
+			phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_RXFPMD2,
+				      (mac[3] << 8 | mac[2]));
+			phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_RXFPMD3,
+				      (mac[5] << 8 | mac[4]));
+
+			val_rxcfg |= DP83869_WOL_MAGIC_EN;
+		} else {
+			val_rxcfg &= ~DP83869_WOL_MAGIC_EN;
+		}
+
+		if (wol->wolopts & WAKE_MAGICSECURE) {
+			phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_RXFSOP1,
+				      (wol->sopass[1] << 8) | wol->sopass[0]);
+			phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_RXFSOP2,
+				      (wol->sopass[3] << 8) | wol->sopass[2]);
+			phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_RXFSOP3,
+				      (wol->sopass[5] << 8) | wol->sopass[4]);
+
+			val_rxcfg |= DP83869_WOL_SEC_EN;
+		} else {
+			val_rxcfg &= ~DP83869_WOL_SEC_EN;
+		}
+
+		if (wol->wolopts & WAKE_UCAST)
+			val_rxcfg |= DP83869_WOL_UCAST_EN;
+		else
+			val_rxcfg &= ~DP83869_WOL_UCAST_EN;
+
+		if (wol->wolopts & WAKE_BCAST)
+			val_rxcfg |= DP83869_WOL_BCAST_EN;
+		else
+			val_rxcfg &= ~DP83869_WOL_BCAST_EN;
+	} else {
+		val_rxcfg &= ~DP83869_WOL_ENH_MAC;
+		val_micr &= ~MII_DP83869_MICR_WOL_INT_EN;
+	}
+
+	phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_RXFCFG, val_rxcfg);
+	phy_write(phydev, MII_DP83869_MICR, val_micr);
+
+	return 0;
+}
+
+static void dp83869_get_wol(struct phy_device *phydev,
+			    struct ethtool_wolinfo *wol)
+{
+	u16 value, sopass_val;
+
+	wol->supported = (WAKE_UCAST | WAKE_BCAST | WAKE_MAGIC |
+			WAKE_MAGICSECURE);
+	wol->wolopts = 0;
+
+	value = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_RXFCFG);
+
+	if (value & DP83869_WOL_UCAST_EN)
+		wol->wolopts |= WAKE_UCAST;
+
+	if (value & DP83869_WOL_BCAST_EN)
+		wol->wolopts |= WAKE_BCAST;
+
+	if (value & DP83869_WOL_MAGIC_EN)
+		wol->wolopts |= WAKE_MAGIC;
+
+	if (value & DP83869_WOL_SEC_EN) {
+		sopass_val = phy_read_mmd(phydev, DP83869_DEVADDR,
+					  DP83869_RXFSOP1);
+		wol->sopass[0] = (sopass_val & 0xff);
+		wol->sopass[1] = (sopass_val >> 8);
+
+		sopass_val = phy_read_mmd(phydev, DP83869_DEVADDR,
+					  DP83869_RXFSOP2);
+		wol->sopass[2] = (sopass_val & 0xff);
+		wol->sopass[3] = (sopass_val >> 8);
+
+		sopass_val = phy_read_mmd(phydev, DP83869_DEVADDR,
+					  DP83869_RXFSOP3);
+		wol->sopass[4] = (sopass_val & 0xff);
+		wol->sopass[5] = (sopass_val >> 8);
+
+		wol->wolopts |= WAKE_MAGICSECURE;
+	}
+
+	if (!(value & DP83869_WOL_ENH_MAC))
+		wol->wolopts = 0;
+}
+
 static int dp83869_config_port_mirroring(struct phy_device *phydev)
 {
 	struct dp83869_private *dp83869 = phydev->priv;
@@ -531,6 +656,9 @@ static struct phy_driver dp83869_driver[] = {
 		.ack_interrupt	= dp83869_ack_interrupt,
 		.config_intr	= dp83869_config_intr,
 
+		.get_wol	= dp83869_get_wol,
+		.set_wol	= dp83869_set_wol,
+
 		.suspend	= genphy_suspend,
 		.resume		= genphy_resume,
 	},
Signature · 1 line
2.28.0
maintainer
#4 lore raw

Re: [PATCH net-next v2 3/3] net: dp83869: Add speed optimization feature

In reply to Dan Murphy
Quoted 8 lines · On Wed, 2 Sep 2020 15:34:44 -0500 Dan Murphy wrote:

Set the speed optimization bit on the DP83869 PHY.

Speed optimization, also known as link downshift, enables fallback to 100M operation after multiple consecutive failed attempts at Gigabit link establishment. Such a case could occur if cabling with only four wires (two twisted pairs) were connected instead of the standard cabling with eight wires (four twisted pairs).

Quoted 5 lines

The number of failed link attempts before falling back to 100M operation is configurable. By default, four failed link attempts are required before falling back to 100M.

there seems to be lots of checkpatch warnings here:

ERROR: switch and case should be at the same indent #111: FILE: drivers/net/phy/dp83869.c:342:
+ switch (cnt) {
+ case DP83869_DOWNSHIFT_1_COUNT:
[...]
+ case DP83869_DOWNSHIFT_2_COUNT:
[...]
+ case DP83869_DOWNSHIFT_4_COUNT:
[...]
+ case DP83869_DOWNSHIFT_8_COUNT:
[...]
+ default:

CHECK: Alignment should match open parenthesis #139: FILE: drivers/net/phy/dp83869.c:370:
+static int dp83869_get_tunable(struct phy_device *phydev,
+ struct ethtool_tunable *tuna, void *data)

CHECK: Alignment should match open parenthesis #150: FILE: drivers/net/phy/dp83869.c:381:
+static int dp83869_set_tunable(struct phy_device *phydev,
+ struct ethtool_tunable *tuna, const void *data)

WARNING: please, no spaces at the start of a line
#168: FILE: drivers/net/phy/dp83869.c:669:
+ ret = phy_modify(phydev, DP83869_CFG2, DP83869_DOWNSHIFT_EN,$

ERROR: code indent should use tabs where possible
#169: FILE: drivers/net/phy/dp83869.c:670:
+ DP83869_DOWNSHIFT_EN);$

WARNING: please, no spaces at the start of a line
#169: FILE: drivers/net/phy/dp83869.c:670:
+ DP83869_DOWNSHIFT_EN);$

WARNING: please, no spaces at the start of a line
#170: FILE: drivers/net/phy/dp83869.c:671:
+ if (ret)$

WARNING: suspect code indent for conditional statements (7, 15) #170: FILE: drivers/net/phy/dp83869.c:671:
+ if (ret)
+ return ret;

ERROR: code indent should use tabs where possible
#171: FILE: drivers/net/phy/dp83869.c:672:
+ return ret;$

WARNING: please, no spaces at the start of a line
#171: FILE: drivers/net/phy/dp83869.c:672:
+ return ret;$

total: 3 errors, 5 warnings, 2 checks, 152 lines checked

#6 lore raw

Re: [PATCH net-next v2 3/3] net: dp83869: Add speed optimization feature

In reply to Dan Murphy
I love your patch! Perhaps something to improve:

Hi Dan,

I love your patch! Perhaps something to improve:

[auto build test WARNING on net-next/master]

url:    https://github.com/0day-ci/linux/commits/Dan-Murphy/DP83869-Feature-additions/20200903-043618
base:   https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git dc1a9bf2c8169d9f607502162af1858a73a18cb8
config: i386-randconfig-m021-20200902 (attached as .config)
compiler: gcc-9 (Debian 9.3.0-15) 9.3.0

If you fix the issue, kindly add following tag as appropriate

smatch warnings:
drivers/net/phy/dp83869.c:669 dp83869_config_init() warn: inconsistent indenting

# https://github.com/0day-ci/linux/commit/307ae0a0e8406ceadb72d448df96322bbd23aa92
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Dan-Murphy/DP83869-Feature-additions/20200903-043618 git checkout 307ae0a0e8406ceadb72d448df96322bbd23aa92
vim +669 drivers/net/phy/dp83869.c

662
663 static int dp83869_config_init(struct phy_device *phydev)
664 {
665 struct dp83869_private *dp83869 = phydev->priv;
666 int ret, val;
667
668 /* Force speed optimization for the PHY even if it strapped */

 > 669	       ret = phy_modify(phydev, DP83869_CFG2, DP83869_DOWNSHIFT_EN,
   670	                        DP83869_DOWNSHIFT_EN);
   671	       if (ret)
   672	               return ret;
   673	
   674		ret = dp83869_configure_mode(phydev, dp83869);
   675		if (ret)
   676			return ret;
   677	
   678		/* Enable Interrupt output INT_OE in CFG4 register */
   679		if (phy_interrupt_is_valid(phydev)) {
   680			val = phy_read(phydev, DP83869_CFG4);
   681			val |= DP83869_INT_OE;
   682			phy_write(phydev, DP83869_CFG4, val);
   683		}
   684	
   685		if (dp83869->port_mirroring != DP83869_PORT_MIRRORING_KEEP)
   686			dp83869_config_port_mirroring(phydev);
   687	
   688		/* Clock output selection if muxing property is set */
   689		if (dp83869->clk_output_sel != DP83869_CLK_O_SEL_REF_CLK)
   690			ret = phy_modify_mmd(phydev,
   691					     DP83869_DEVADDR, DP83869_IO_MUX_CFG,
   692					     DP83869_IO_MUX_CFG_CLK_O_SEL_MASK,
   693					     dp83869->clk_output_sel <<
   694					     DP83869_IO_MUX_CFG_CLK_O_SEL_SHIFT);

695
696 if (phy_interface_is_rgmii(phydev)) {
697 ret = phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_RGMIIDCTL,
698 dp83869->rx_int_delay |
699 dp83869->tx_int_delay << DP83869_RGMII_CLK_DELAY_SHIFT);
700 if (ret)
701 return ret;
702
703 val = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_RGMIICTL);
704 val &= ~(DP83869_RGMII_TX_CLK_DELAY_EN |
705 DP83869_RGMII_RX_CLK_DELAY_EN);
706
707 if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
708 val |= (DP83869_RGMII_TX_CLK_DELAY_EN |
709 DP83869_RGMII_RX_CLK_DELAY_EN);
710
711 if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
712 val |= DP83869_RGMII_TX_CLK_DELAY_EN;
713
714 if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
715 val |= DP83869_RGMII_RX_CLK_DELAY_EN;
716
717 ret = phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_RGMIICTL,
718 val);
719 }
720
721 return ret;
722 }
723

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

author
#5 lore raw

Re: [PATCH net-next v2 3/3] net: dp83869: Add speed optimization feature

In reply to Jakub Kicinski

Jakub

Quoted 64 lines · Jakub Kicinski
Quoted 8 lines · On Wed, 2 Sep 2020 15:34:44 -0500 Dan Murphy wrote:

Set the speed optimization bit on the DP83869 PHY.

Speed optimization, also known as link downshift, enables fallback to 100M operation after multiple consecutive failed attempts at Gigabit link establishment. Such a case could occur if cabling with only four wires (two twisted pairs) were connected instead of the standard cabling with eight wires (four twisted pairs).

Quoted 5 lines

The number of failed link attempts before falling back to 100M operation is configurable. By default, four failed link attempts are required before falling back to 100M.

there seems to be lots of checkpatch warnings here:

ERROR: switch and case should be at the same indent #111: FILE: drivers/net/phy/dp83869.c:342:

drivers/net/phy/dp83869.c +6 -0
+	switch (cnt) {
+		case DP83869_DOWNSHIFT_1_COUNT:
[...]
+		case DP83869_DOWNSHIFT_2_COUNT:
[...]
+		case DP83869_DOWNSHIFT_4_COUNT:
[...]
+		case DP83869_DOWNSHIFT_8_COUNT:
[...]
+		default:

CHECK: Alignment should match open parenthesis
#139: FILE: drivers/net/phy/dp83869.c:370:

drivers/net/phy/dp83869.c +2 -0
+static int dp83869_get_tunable(struct phy_device *phydev,
+				struct ethtool_tunable *tuna, void *data)

CHECK: Alignment should match open parenthesis
#150: FILE: drivers/net/phy/dp83869.c:381:

drivers/net/phy/dp83869.c +2 -0
+static int dp83869_set_tunable(struct phy_device *phydev,
+				struct ethtool_tunable *tuna, const void *data)

WARNING: please, no spaces at the start of a line
#168: FILE: drivers/net/phy/dp83869.c:669:
+ ret = phy_modify(phydev, DP83869_CFG2, DP83869_DOWNSHIFT_EN,$

ERROR: code indent should use tabs where possible
#169: FILE: drivers/net/phy/dp83869.c:670:
+ DP83869_DOWNSHIFT_EN);$

WARNING: please, no spaces at the start of a line
#169: FILE: drivers/net/phy/dp83869.c:670:
+ DP83869_DOWNSHIFT_EN);$

WARNING: please, no spaces at the start of a line
#170: FILE: drivers/net/phy/dp83869.c:671:
+ if (ret)$

WARNING: suspect code indent for conditional statements (7, 15) #170: FILE: drivers/net/phy/dp83869.c:671:

drivers/net/phy/dp83869.c +2 -0
+       if (ret)
+               return ret;

ERROR: code indent should use tabs where possible
#171: FILE: drivers/net/phy/dp83869.c:672:
+ return ret;$

Quoted 5 lines

WARNING: please, no spaces at the start of a line
#171: FILE: drivers/net/phy/dp83869.c:672:
+ return ret;$

total: 3 errors, 5 warnings, 2 checks, 152 lines checked

I will fix these.

Dan