Skip to contentSkip to conversation

tracing: Make the space reserved for the pid wider

PATCH In review Sebastian Andrzej Siewior 2 participants 4 messages Sep 4, 2020 – Sep 16, 2020 Tracing

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 tracing: Make the space reserved for the pid wider

For 64bit CONFIG_BASE_SMALL=0 systems PID_MAX_LIMIT is set by default to 4194304. During boot the kernel sets a new value based on number of CPUs but no lower than 32768. It is 1024 per CPU so with 128 CPUs the default becomes 131072 which needs six digits.
This value can be increased during run time but must not exceed the initial upper limit.

Systemd sometime after v241 sets it to the upper limit during boot. The result is that when the pid exceeds five digits, the trace output is a little hard to read because it is no longer properly padded (same like on big iron with 98+ CPUs).

Increase the pid padding to seven digits.

---
 kernel/trace/trace.c        | 38 ++++++++++++++++++-------------------
 kernel/trace/trace_output.c | 12 ++++++------
 2 files changed, 25 insertions(+), 25 deletions(-)
kernel/trace/trace.c +19 -19
index f40d850ebabcc..2a7c26345e835 100644
@@ -3782,14 +3782,14 @@ unsigned long trace_total_entries(struct trace_array *tr)
 
 static void print_lat_help_header(struct seq_file *m)
 {
-	seq_puts(m, "#                  _------=> CPU#            \n"
-		    "#                 / _-----=> irqs-off        \n"
-		    "#                | / _----=> need-resched    \n"
-		    "#                || / _---=> hardirq/softirq \n"
-		    "#                ||| / _--=> preempt-depth   \n"
-		    "#                |||| /     delay            \n"
-		    "#  cmd     pid   ||||| time  |   caller      \n"
-		    "#     \\   /      |||||  \\    |   /         \n");
+	seq_puts(m, "#                    _------=> CPU#            \n"
+		    "#                   / _-----=> irqs-off        \n"
+		    "#                  | / _----=> need-resched    \n"
+		    "#                  || / _---=> hardirq/softirq \n"
+		    "#                  ||| / _--=> preempt-depth   \n"
+		    "#                  |||| /     delay            \n"
+		    "#  cmd     pid     ||||| time  |   caller      \n"
+		    "#     \\   /        |||||  \\    |   /         \n");
 }
 
 static void print_event_info(struct array_buffer *buf, struct seq_file *m)
@@ -3810,26 +3810,26 @@ static void print_func_help_header(struct array_buffer *buf, struct seq_file *m,
 
 	print_event_info(buf, m);
 
-	seq_printf(m, "#           TASK-PID   %s  CPU#   TIMESTAMP  FUNCTION\n", tgid ? "TGID     " : "");
-	seq_printf(m, "#              | |     %s    |       |         |\n",	 tgid ? "  |      " : "");
+	seq_printf(m, "#           TASK-PID    %s CPU#     TIMESTAMP  FUNCTION\n", tgid ? "   TGID   " : "");
+	seq_printf(m, "#              | |      %s   |         |         |\n",      tgid ? "     |    " : "");
 }
 
 static void print_func_help_header_irq(struct array_buffer *buf, struct seq_file *m,
 				       unsigned int flags)
 {
 	bool tgid = flags & TRACE_ITER_RECORD_TGID;
-	const char *space = "          ";
-	int prec = tgid ? 10 : 2;
+	const char *space = "            ";
+	int prec = tgid ? 12 : 2;
 
 	print_event_info(buf, m);
 
-	seq_printf(m, "#                          %.*s  _-----=> irqs-off\n", prec, space);
-	seq_printf(m, "#                          %.*s / _----=> need-resched\n", prec, space);
-	seq_printf(m, "#                          %.*s| / _---=> hardirq/softirq\n", prec, space);
-	seq_printf(m, "#                          %.*s|| / _--=> preempt-depth\n", prec, space);
-	seq_printf(m, "#                          %.*s||| /     delay\n", prec, space);
-	seq_printf(m, "#           TASK-PID %.*sCPU#  ||||    TIMESTAMP  FUNCTION\n", prec, "   TGID   ");
-	seq_printf(m, "#              | |   %.*s  |   ||||       |         |\n", prec, "     |    ");
+	seq_printf(m, "#                            %.*s  _-----=> irqs-off\n", prec, space);
+	seq_printf(m, "#                            %.*s / _----=> need-resched\n", prec, space);
+	seq_printf(m, "#                            %.*s| / _---=> hardirq/softirq\n", prec, space);
+	seq_printf(m, "#                            %.*s|| / _--=> preempt-depth\n", prec, space);
+	seq_printf(m, "#                            %.*s||| /     delay\n", prec, space);
+	seq_printf(m, "#           TASK-PID  %.*s CPU#  ||||   TIMESTAMP  FUNCTION\n", prec, "     TGID   ");
+	seq_printf(m, "#              | |    %.*s   |   ||||      |         |\n", prec, "       |    ");
 }
 
 void
kernel/trace/trace_output.c +6 -6
index 4d1893564912d..000e9dc224c61 100644
@@ -497,7 +497,7 @@ lat_print_generic(struct trace_seq *s, struct trace_entry *entry, int cpu)
 
 	trace_find_cmdline(entry->pid, comm);
 
-	trace_seq_printf(s, "%8.8s-%-5d %3d",
+	trace_seq_printf(s, "%8.8s-%-7d %3d",
 			 comm, entry->pid, cpu);
 
 	return trace_print_lat_fmt(s, entry);
@@ -588,15 +588,15 @@ int trace_print_context(struct trace_iterator *iter)
 
 	trace_find_cmdline(entry->pid, comm);
 
-	trace_seq_printf(s, "%16s-%-5d ", comm, entry->pid);
+	trace_seq_printf(s, "%16s-%-7d ", comm, entry->pid);
 
 	if (tr->trace_flags & TRACE_ITER_RECORD_TGID) {
 		unsigned int tgid = trace_find_tgid(entry->pid);
 
 		if (!tgid)
-			trace_seq_printf(s, "(-----) ");
+			trace_seq_printf(s, "(-------) ");
 		else
-			trace_seq_printf(s, "(%5d) ", tgid);
+			trace_seq_printf(s, "(%7d) ", tgid);
 	}
 
 	trace_seq_printf(s, "[%03d] ", iter->cpu);
@@ -636,7 +636,7 @@ int trace_print_lat_context(struct trace_iterator *iter)
 		trace_find_cmdline(entry->pid, comm);
 
 		trace_seq_printf(
-			s, "%16s %5d %3d %d %08x %08lx ",
+			s, "%16s %7d %3d %d %08x %08lx ",
 			comm, entry->pid, iter->cpu, entry->flags,
 			entry->preempt_count, iter->idx);
 	} else {
@@ -917,7 +917,7 @@ static enum print_line_t trace_ctxwake_print(struct trace_iterator *iter,
 	S = task_index_to_char(field->prev_state);
 	trace_find_cmdline(field->next_pid, comm);
 	trace_seq_printf(&iter->seq,
-			 " %5d:%3d:%c %s [%03d] %5d:%3d:%c %s\n",
+			 " %7d:%3d:%c %s [%03d] %7d:%3d:%c %s\n",
 			 field->prev_pid,
 			 field->prev_prio,
 			 S, delim,
Signature · 1 line
2.28.0
#1 lore raw
Quoted 7 lines · On 2020-09-04 10:23:31 [+0200], To [email protected] wrote:

For 64bit CONFIG_BASE_SMALL=0 systems PID_MAX_LIMIT is set by default to 4194304. During boot the kernel sets a new value based on number of CPUs but no lower than 32768. It is 1024 per CPU so with 128 CPUs the default becomes 131072 which needs six digits.
This value can be increased during run time but must not exceed the initial upper limit.

Quoted 6 lines

Systemd sometime after v241 sets it to the upper limit during boot. The result is that when the pid exceeds five digits, the trace output is a little hard to read because it is no longer properly padded (same like on big iron with 98+ CPUs).

Increase the pid padding to seven digits.

ping

Sebastian

maintainer
#2 lore raw
Quoted 8 lines · On Tue, 15 Sep 2020 12:46:48 +0200 Sebastian Andrzej Siewior…
Quoted 7 lines · On 2020-09-04 10:23:31 [+0200], To [email protected] wrote:

For 64bit CONFIG_BASE_SMALL=0 systems PID_MAX_LIMIT is set by default to 4194304. During boot the kernel sets a new value based on number of CPUs but no lower than 32768. It is 1024 per CPU so with 128 CPUs the default becomes 131072 which needs six digits.
This value can be increased during run time but must not exceed the initial upper limit.

Quoted 9 lines
Quoted 6 lines

Systemd sometime after v241 sets it to the upper limit during boot. The result is that when the pid exceeds five digits, the trace output is a little hard to read because it is no longer properly padded (same like on big iron with 98+ CPUs).

Increase the pid padding to seven digits.

ping

Hi Sebastian,

I'm still buried in email from my PTO, with lots of patches I need to review and apply (or comment on). And I'm also behind in internal work affairs. I'm not ignoring this, just taking some time to get to it :-/

-- Steve

#3 lore raw
Quoted 1 line · Steven Rostedt

Hi Sebastian,

Hi Steven,

Quoted 3 lines

I'm still buried in email from my PTO, with lots of patches I need to review and apply (or comment on). And I'm also behind in internal work affairs. I'm not ignoring this, just taking some time to get to it :-/

Sorry, I forgot that PTO part…

Quoted 1 line

-- Steve

Sebastian