Skip to contentSkip to conversation

ext4: Implement swap_activate aops using iomap

PATCH Applied Ritesh Harjani 4 participants 4 messages Sep 4, 2020 – Sep 24, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ext4: Implement swap_activate aops using iomap

After moving ext4's bmap to iomap interface, swapon functionality on files created using fallocate (which creates unwritten extents) are failing. This is since iomap_bmap interface returns 0 for unwritten extents and thus generic_swapfile_activate considers this as holes and hence bail out with below kernel msg :-

[340.915835] swapon: swapfile has holes

To fix this we need to implement ->swap_activate aops in ext4 which will use ext4_iomap_report_ops. Since we only need to return the list of extents so ext4_iomap_report_ops should be enough.

Fixes ac58e4fb03f ("ext4: move ext4 bmap to use iomap infrastructure")

---
[Tested xfstests with -g swap; Tested stress-ng with --thrash option]

 fs/ext4/inode.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
fs/ext4/inode.c +11 -0
index 1556cabd3a7d..9ac0f83e6fbe 100644
@@ -3605,6 +3605,13 @@ static int ext4_set_page_dirty(struct page *page)
 	return __set_page_dirty_buffers(page);
 }
 
+static int ext4_iomap_swap_activate(struct swap_info_struct *sis,
+				    struct file *file, sector_t *span)
+{
+	return iomap_swapfile_activate(sis, file, span,
+				       &ext4_iomap_report_ops);
+}
+
 static const struct address_space_operations ext4_aops = {
 	.readpage		= ext4_readpage,
 	.readpages		= ext4_readpages,
@@ -3620,6 +3627,7 @@ static const struct address_space_operations ext4_aops = {
 	.migratepage		= buffer_migrate_page,
 	.is_partially_uptodate  = block_is_partially_uptodate,
 	.error_remove_page	= generic_error_remove_page,
+	.swap_activate		= ext4_iomap_swap_activate,
 };
 
 static const struct address_space_operations ext4_journalled_aops = {
@@ -3636,6 +3644,7 @@ static const struct address_space_operations ext4_journalled_aops = {
 	.direct_IO		= noop_direct_IO,
 	.is_partially_uptodate  = block_is_partially_uptodate,
 	.error_remove_page	= generic_error_remove_page,
+	.swap_activate		= ext4_iomap_swap_activate,
 };
 
 static const struct address_space_operations ext4_da_aops = {
@@ -3653,6 +3662,7 @@ static const struct address_space_operations ext4_da_aops = {
 	.migratepage		= buffer_migrate_page,
 	.is_partially_uptodate  = block_is_partially_uptodate,
 	.error_remove_page	= generic_error_remove_page,
+	.swap_activate		= ext4_iomap_swap_activate,
 };
 
 static const struct address_space_operations ext4_dax_aops = {
@@ -3661,6 +3671,7 @@ static const struct address_space_operations ext4_dax_aops = {
 	.set_page_dirty		= noop_set_page_dirty,
 	.bmap			= ext4_bmap,
 	.invalidatepage		= noop_invalidatepage,
+	.swap_activate		= ext4_iomap_swap_activate,
 };
 
 void ext4_set_aops(struct inode *inode)
Signature · 1 line
2.25.1
Reviewed-by on v1 1/1
#1 lore raw
Quoted 12 lines · Ritesh Harjani

After moving ext4's bmap to iomap interface, swapon functionality on files created using fallocate (which creates unwritten extents) are failing. This is since iomap_bmap interface returns 0 for unwritten extents and thus generic_swapfile_activate considers this as holes and hence bail out with below kernel msg :-

[340.915835] swapon: swapfile has holes

To fix this we need to implement ->swap_activate aops in ext4 which will use ext4_iomap_report_ops. Since we only need to return the list of extents so ext4_iomap_report_ops should be enough.

Quoted 5 lines
Fixes ac58e4fb03f ("ext4: move ext4 bmap to use iomap infrastructure")

---
[Tested xfstests with -g swap; Tested stress-ng with --thrash option]

Seems reasonable to me (at least from the iomap and "did you run QA?" end...)

--D

Quoted 57 lines
 fs/ext4/inode.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
fs/ext4/inode.c +11 -0
index 1556cabd3a7d..9ac0f83e6fbe 100644
@@ -3605,6 +3605,13 @@ static int ext4_set_page_dirty(struct page *page)
 	return __set_page_dirty_buffers(page);
 }
 
+static int ext4_iomap_swap_activate(struct swap_info_struct *sis,
+				    struct file *file, sector_t *span)
+{
+	return iomap_swapfile_activate(sis, file, span,
+				       &ext4_iomap_report_ops);
+}
+
 static const struct address_space_operations ext4_aops = {
 	.readpage		= ext4_readpage,
 	.readpages		= ext4_readpages,
@@ -3620,6 +3627,7 @@ static const struct address_space_operations ext4_aops = {
 	.migratepage		= buffer_migrate_page,
 	.is_partially_uptodate  = block_is_partially_uptodate,
 	.error_remove_page	= generic_error_remove_page,
+	.swap_activate		= ext4_iomap_swap_activate,
 };
 
 static const struct address_space_operations ext4_journalled_aops = {
@@ -3636,6 +3644,7 @@ static const struct address_space_operations ext4_journalled_aops = {
 	.direct_IO		= noop_direct_IO,
 	.is_partially_uptodate  = block_is_partially_uptodate,
 	.error_remove_page	= generic_error_remove_page,
+	.swap_activate		= ext4_iomap_swap_activate,
 };
 
 static const struct address_space_operations ext4_da_aops = {
@@ -3653,6 +3662,7 @@ static const struct address_space_operations ext4_da_aops = {
 	.migratepage		= buffer_migrate_page,
 	.is_partially_uptodate  = block_is_partially_uptodate,
 	.error_remove_page	= generic_error_remove_page,
+	.swap_activate		= ext4_iomap_swap_activate,
 };
 
 static const struct address_space_operations ext4_dax_aops = {
@@ -3661,6 +3671,7 @@ static const struct address_space_operations ext4_dax_aops = {
 	.set_page_dirty		= noop_set_page_dirty,
 	.bmap			= ext4_bmap,
 	.invalidatepage		= noop_invalidatepage,
+	.swap_activate		= ext4_iomap_swap_activate,
 };
 
 void ext4_set_aops(struct inode *inode)
Signature · 1 line
2.25.1
Reviewed-by on v1 1/1
#2 lore raw
In reply to Ritesh Harjani
Quoted 11 lines · Ritesh Harjani

After moving ext4's bmap to iomap interface, swapon functionality on files created using fallocate (which creates unwritten extents) are failing. This is since iomap_bmap interface returns 0 for unwritten extents and thus generic_swapfile_activate considers this as holes and hence bail out with below kernel msg :-

[340.915835] swapon: swapfile has holes

To fix this we need to implement ->swap_activate aops in ext4 which will use ext4_iomap_report_ops. Since we only need to return the list of extents so ext4_iomap_report_ops should be enough.

Looks good,

maintainer Applied
#3 lore raw
In reply to Ritesh Harjani
Quoted 8 lines · Ritesh Harjani

After moving ext4's bmap to iomap interface, swapon functionality on files created using fallocate (which creates unwritten extents) are failing. This is since iomap_bmap interface returns 0 for unwritten extents and thus generic_swapfile_activate considers this as holes and hence bail out with below kernel msg :-

[340.915835] swapon: swapfile has holes
Quoted 7 lines

To fix this we need to implement ->swap_activate aops in ext4 which will use ext4_iomap_report_ops. Since we only need to return the list of extents so ext4_iomap_report_ops should be enough.

Fixes ac58e4fb03f ("ext4: move ext4 bmap to use iomap infrastructure")

Thanks, applied.

- Ted