i2c: i801: Exclude device from suspend direct complete optimization
PATCH 1/1 i2c: i801: Exclude device from suspend direct complete optimization
By default, PCI drivers with runtime PM enabled will skip the calls to suspend and resume on system PM. For this driver, we don't want that, as we need to perform additional steps for system PM to work properly on all systems. So instruct the PM core to not skip these calls.
Fixes a9c8088c7988 ("i2c: i801: Don't restore config registers on runtime PM")
Reported-by Volker Rümelin <[email protected]>
Signed-off-by Jean Delvare <[email protected]>
--- drivers/i2c/busses/i2c-i801.c | 1 + 1 file changed, 1 insertion(+)
drivers/i2c/busses/i2c-i801.c +1 -0
@@ -1917,6 +1917,7 @@ static int i801_probe(struct pci_dev *depci_set_drvdata (dev, priv); +dev_pm_set_driver_flags (&dev->dev,DPM_FLAG_NO_DIRECT_COMPLETE );pm_runtime_set_autosuspend_delay (&dev->dev,1000 );pm_runtime_use_autosuspend (&dev->dev);pm_runtime_put_autosuspend (&dev->dev);
Signature · 2 lines
Jean Delvare SUSE L3 Support
Wolfram Sang
AppliedQuoted 10 lines · Jean Delvare
By default, PCI drivers with runtime PM enabled will skip the calls to suspend and resume on system PM. For this driver, we don't want that, as we need to perform additional steps for system PM to work properly on all systems. So instruct the PM core to not skip these calls.
Fixes a9c8088c7988 ("i2c: i801: Don't restore config registers on runtime PM")Reported-by Volker Rümelin <[email protected]>Signed-off-by Jean Delvare <[email protected]>
Applied to for-current, thanks!