iommu/tegra-smmu: Some small fixes
Subsystems (3)
cover iommu/tegra-smmu: Some small fixes
These are a series of small fixes for tegra-smmu driver. They might not be critial bugs as current mainline does not enable a lot of clients, but be nicer to have since we are going to enable the DMA domain for other clients in the near future.
Nicolin Chen (3):
iommu/tegra-smmu: Do not use PAGE_SHIFT and PAGE_MASK iommu/tegra-smmu: Fix iova->phys translation iommu/tegra-smmu: Allow to group clients in same swgroup
drivers/iommu/tegra-smmu.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-)
Signature · 6 lines
2.17.1 _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
PATCH 1/3 iommu/tegra-smmu: Do not use PAGE_SHIFT and PAGE_MASK
PAGE_SHIFT and PAGE_MASK are defined corresponding to the page size for CPU virtual addresses, which means PAGE_SHIFT could be a number other than 12, but tegra-smmu maintains fixed 4KB IOVA pages and has fixed [21:12] bit range for PTE entries.
So this patch replaces all PAGE_SHIFT/PAGE_MASK references with the macros defined with SMMU_PTE_SHIFT.
--- drivers/iommu/tegra-smmu.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-)
drivers/iommu/tegra-smmu.c +10 -4
@@ -130,6 +130,11 @@ static inline u32 smmu_readl(struct tegra_smmu *smmu, unsigned long offset)#define SMMU_PDE_SHIFT 22#define SMMU_PTE_SHIFT 12 +#define SMMU_PAGE_MASK (~(SMMU_SIZE_PT-1)) +#define SMMU_OFFSET_IN_PAGE (x) ((unsigned long)(x) & ~SMMU_PAGE_MASK) +#define SMMU_PFN_PHYS (x) ((phys_addr_t)(x) << SMMU_PTE_SHIFT) +#define SMMU_PHYS_PFN (x) ((unsigned long)((x) >> SMMU_PTE_SHIFT)) +#define SMMU_PD_READABLE (1 << 31)#define SMMU_PD_WRITABLE (1 << 30)#define SMMU_PD_NONSECURE (1 << 29)
@@ -644,7 +649,7 @@ static void tegra_smmu_set_pte(struct tegra_smmu_as *as, unsigned long iova, u32 *pte, dma_addr_t pte_dma, u32 val) { struct tegra_smmu *smmu = as->smmu; -unsigned long offset =offset_in_page (pte); +unsigned long offset =SMMU_OFFSET_IN_PAGE (pte); *pte = val;
@@ -726,7 +731,7 @@ __tegra_smmu_map(struct iommu_domain *domain, unsigned long iova, pte_attrs |=SMMU_PTE_WRITABLE ;tegra_smmu_set_pte (as, iova, pte, pte_dma, -__phys_to_pfn (paddr) | pte_attrs); +SMMU_PHYS_PFN (paddr) | pte_attrs);return 0 ; }
@@ -790,7 +795,7 @@ static phys_addr_t tegra_smmu_iova_to_phys(struct iommu_domain *domain, pfn = *pte & as->smmu->pfn_mask; -return PFN_PHYS (pfn); +return SMMU_PFN_PHYS (pfn); }static struct tegra_smmu *tegra_smmu_find (struct device_node *np)
@@ -1108,7 +1113,8 @@ struct tegra_smmu *tegra_smmu_probe(struct device *dev, smmu->dev = dev; smmu->mc = mc; - smmu->pfn_mask =BIT_MASK (mc->soc->num_address_bits -PAGE_SHIFT ) -1 ; + smmu->pfn_mask = +BIT_MASK (mc->soc->num_address_bits -SMMU_PTE_SHIFT ) -1 ;dev_dbg (dev,"address bits: %u, PFN mask: %#lx\n" , mc->soc->num_address_bits, smmu->pfn_mask); smmu->tlb_mask = (smmu->soc->num_tlb_lines <<1 ) -1 ;
Signature · 6 lines
2.17.1 _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
Re: [PATCH 1/3] iommu/tegra-smmu: Do not use PAGE_SHIFT and PAGE_MASK
Quoted 57 lines · Nicolin Chen
PAGE_SHIFTandPAGE_MASKare defined corresponding to the page size for CPU virtual addresses, which meansPAGE_SHIFTcould be a number other than 12, but tegra-smmu maintains fixed 4KB IOVA pages and has fixed [21:12] bit range for PTE entries.So this patch replaces all PAGE_SHIFT/PAGE_MASK references with the macros defined with
SMMU_PTE_SHIFT.Signed-off-by Nicolin Chen <[email protected]>--- drivers/iommu/tegra-smmu.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-)drivers/iommu/tegra-smmu.c +8
-3@@ -130,6 +130,11 @@ static inline u32 smmu_readl(struct tegra_smmu *smmu, unsigned long offset)#define SMMU_PDE_SHIFT 22#define SMMU_PTE_SHIFT 12 +#define SMMU_PAGE_MASK (~(SMMU_SIZE_PT-1)) +#define SMMU_OFFSET_IN_PAGE (x) ((unsigned long)(x) & ~SMMU_PAGE_MASK) +#define SMMU_PFN_PHYS (x) ((phys_addr_t)(x) << SMMU_PTE_SHIFT) +#define SMMU_PHYS_PFN (x) ((unsigned long)((x) >> SMMU_PTE_SHIFT)) +#define SMMU_PD_READABLE (1 << 31)#define SMMU_PD_WRITABLE (1 << 30)#define SMMU_PD_NONSECURE (1 << 29)@@ -644,7 +649,7 @@ static void tegra_smmu_set_pte(struct tegra_smmu_as *as, unsigned long iova, u32 *pte, dma_addr_t pte_dma, u32 val) { struct tegra_smmu *smmu = as->smmu; -unsigned long offset =offset_in_page (pte); +unsigned long offset =SMMU_OFFSET_IN_PAGE (pte); *pte = val;@@ -726,7 +731,7 @@ __tegra_smmu_map(struct iommu_domain *domain, unsigned long iova, pte_attrs |=SMMU_PTE_WRITABLE ;tegra_smmu_set_pte (as, iova, pte, pte_dma, -__phys_to_pfn (paddr) | pte_attrs); +SMMU_PHYS_PFN (paddr) | pte_attrs);return 0 ; }@@ -790,7 +795,7 @@ static phys_addr_t tegra_smmu_iova_to_phys(struct iommu_domain *domain, pfn = *pte & as->smmu->pfn_mask; -return PFN_PHYS (pfn); +return SMMU_PFN_PHYS (pfn); }static struct tegra_smmu *tegra_smmu_find (struct device_node *np)
drivers/iommu/tegra-smmu.c struct tegra_smmu *tegra_smmu_probe(struct device *dev, · line 1117
Quoted 6 lines
drivers/iommu/tegra-smmu.c +2
-1@@ -1108,7 +1113,8 @@ struct tegra_smmu *tegra_smmu_probe(struct device *dev, smmu->dev = dev; smmu->mc = mc; - smmu->pfn_mask =BIT_MASK (mc->soc->num_address_bits -PAGE_SHIFT ) -1 ; + smmu->pfn_mask = +BIT_MASK (mc->soc->num_address_bits -SMMU_PTE_SHIFT ) -1 ;
checkpatch no longer warns about lines longer than 80 characters. The new limit is 100, so you can fit this all on one line.
But either way:
PATCH 2/3 iommu/tegra-smmu: Fix iova->phys translation
In reply to Nicolin ChenIOVA might not be always 4KB aligned. So tegra_smmu_iova_to_phys function needs to add on the lower 12-bit offset from input iova.
--- drivers/iommu/tegra-smmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iommu/tegra-smmu.c +1 -1
@@ -795,7 +795,7 @@ static phys_addr_t tegra_smmu_iova_to_phys(struct iommu_domain *domain, pfn = *pte & as->smmu->pfn_mask; -return SMMU_PFN_PHYS (pfn); +return SMMU_PFN_PHYS (pfn) +SMMU_OFFSET_IN_PAGE (iova); }static struct tegra_smmu *tegra_smmu_find (struct device_node *np)
Signature · 6 lines
2.17.1 _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
Re: [PATCH 2/3] iommu/tegra-smmu: Fix iova->phys translation
Quoted 13 lines · Nicolin Chen
IOVA might not be always 4KB aligned. So
tegra_smmu_iova_to_physfunction needs to add on the lower 12-bit offset from input iova.Signed-off-by Nicolin Chen <[email protected]>--- drivers/iommu/tegra-smmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/iommu/tegra-smmu.c +0
-0
drivers/iommu/tegra-smmu.c static phys_addr_t tegra_smmu_iova_to_phys(struct iommu_domain *domain, · line 801
Quoted 8 lines
drivers/iommu/tegra-smmu.c +1
-1@@ -795,7 +795,7 @@ static phys_addr_t tegra_smmu_iova_to_phys(struct iommu_domain *domain, pfn = *pte & as->smmu->pfn_mask; -return SMMU_PFN_PHYS (pfn); +return SMMU_PFN_PHYS (pfn) +SMMU_OFFSET_IN_PAGE (iova); }static struct tegra_smmu *tegra_smmu_find (struct device_node *np)
PATCH 3/3 iommu/tegra-smmu: Allow to group clients in same swgroup
In reply to Nicolin ChenThere can be clients using the same swgroup in DT, for example i2c0 and i2c1. The current driver will add them to separate IOMMU groups, though it has implemented device_group() callback which is to group devices using different swgroups like DC and DCB.
All clients having the same swgroup should be also added to the same IOMMU group so as to share an asid. Otherwise, the asid register may get overwritten every time a new device is attached.
--- drivers/iommu/tegra-smmu.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)
drivers/iommu/tegra-smmu.c +7 -4
@@ -23,6 +23,7 @@ struct tegra_smmu_group {struct tegra_smmu *smmu;const struct tegra_smmu_group_soc *soc;struct iommu_group *group; +unsigned int swgroup; };struct tegra_smmu {
@@ -909,14 +910,14 @@ static struct iommu_group *tegra_smmu_group_get(struct tegra_smmu *smmu,struct tegra_smmu_group *group;struct iommu_group *grp; +/* Find group_soc associating with swgroup */ soc =tegra_smmu_find_group (smmu, swgroup); -if (!soc) -return NULL ;mutex_lock (&smmu->lock); +/* Find existing iommu_group associating with swgroup or group_soc */ list_for_each_entry (group, &smmu->groups, list) -if (group->soc == soc) { +if ((group->swgroup == swgroup) || (soc && group->soc == soc)) { grp =iommu_group_ref_get (group->group);mutex_unlock (&smmu->lock);return grp;
@@ -929,6 +930,7 @@ static struct iommu_group *tegra_smmu_group_get(struct tegra_smmu *smmu, }INIT_LIST_HEAD (&group->list); + group->swgroup = swgroup; group->smmu = smmu; group->soc = soc;
@@ -940,7 +942,8 @@ static struct iommu_group *tegra_smmu_group_get(struct tegra_smmu *smmu, }iommu_group_set_iommudata (group->group, group, tegra_smmu_group_release); -iommu_group_set_name (group->group, soc->name); +if (soc) +iommu_group_set_name (group->group, soc->name);list_add_tail (&group->list, &smmu->groups);mutex_unlock (&smmu->lock);
Signature · 6 lines
2.17.1 _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
Re: [PATCH 3/3] iommu/tegra-smmu: Allow to group clients in same swgroup
Quoted 5 lines · Nicolin Chen
There can be clients using the same swgroup in DT, for example i2c0 and i2c1. The current driver will add them to separate IOMMU groups, though it has implemented
device_group()callback which is to group devices using different swgroups like DC and DCB.
Quoted 8 lines
All clients having the same swgroup should be also added to the same IOMMU group so as to share an asid. Otherwise, the asid register may get overwritten every time a new device is attached.
Signed-off-by Nicolin Chen <[email protected]>--- drivers/iommu/tegra-smmu.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)
Makes sense:
Quoted 6 lines · Nicolin Chen
These are a series of small fixes for tegra-smmu driver. They might not be critial bugs as current mainline does not enable a lot of clients, but be nicer to have since we are going to enable the DMA domain for other clients in the near future.
Quoted 7 lines
Nicolin Chen (3):
iommu/tegra-smmu: Do not usePAGE_SHIFTandPAGE_MASKiommu/tegra-smmu: Fixiova->phystranslation iommu/tegra-smmu: Allow to group clients in same swgroupdrivers/iommu/tegra-smmu.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-)
Applied, thanks.