Skip to contentSkip to conversation

scsi: ufs: atomic update for clkgating_enable

PATCH In review Jaegeuk Kim 3 participants 12 messages Sep 15, 2020 – Sep 22, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/6 scsi: ufs: atomic update for clkgating_enable

From: Jaegeuk Kim <[email protected]>

When giving a stress test which enables/disables clkgating, we hit device timeout sometimes. This patch avoids subtle racy condition to address it.

Cc Alim Akhtar <[email protected]>
Cc Avri Altman <[email protected]>
---
 drivers/scsi/ufs/ufshcd.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/scsi/ufs/ufshcd.c +6 -6
index 1d157ff58d817..d929c3d1e58cc 100644
@@ -1791,19 +1791,19 @@ static ssize_t ufshcd_clkgate_enable_store(struct device *dev,
 		return -EINVAL;
 
 	value = !!value;
+
+	spin_lock_irqsave(hba->host->host_lock, flags);
 	if (value == hba->clk_gating.is_enabled)
 		goto out;
 
-	if (value) {
-		ufshcd_release(hba);
-	} else {
-		spin_lock_irqsave(hba->host->host_lock, flags);
+	if (value)
+		hba->clk_gating.active_reqs--;
+	else
 		hba->clk_gating.active_reqs++;
-		spin_unlock_irqrestore(hba->host->host_lock, flags);
-	}
 
 	hba->clk_gating.is_enabled = value;
 out:
+	spin_unlock_irqrestore(hba->host->host_lock, flags);
 	return count;
 }
 
Signature · 1 line
2.28.0.618.gf4bc123cb7-goog
#1 lore raw

PATCH 2/6 scsi: ufs: clear UAC for FFU

From: Jaegeuk Kim <[email protected]>

In order to conduct FFU or RPMB operations, UFS needs to clear UAC. This patch clears it explicitly, so that we could get no failure given early execution.

Cc Alim Akhtar <[email protected]>
Cc Avri Altman <[email protected]>
---
 drivers/scsi/ufs/ufshcd.c | 41 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)
drivers/scsi/ufs/ufshcd.c +41 -0
index d929c3d1e58cc..5deba03a61f75 100644
@@ -7385,6 +7385,45 @@ static int ufshcd_add_lus(struct ufs_hba *hba)
 	return ret;
 }
 
+static int
+ufshcd_send_request_sense(struct ufs_hba *hba, struct scsi_device *sdp);
+
+static int ufshcd_clear_uac(struct ufs_hba *hba)
+{
+	struct scsi_device *sdp;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(hba->host->host_lock, flags);
+	sdp = hba->sdev_ufs_device;
+	if (sdp) {
+		ret = scsi_device_get(sdp);
+		if (!ret && !scsi_device_online(sdp)) {
+			ret = -ENODEV;
+			scsi_device_put(sdp);
+		}
+	} else {
+		ret = -ENODEV;
+	}
+	spin_unlock_irqrestore(hba->host->host_lock, flags);
+	if (ret)
+		goto out_err;
+
+	if (hba->wlun_dev_clr_ua) {
+		ret = ufshcd_send_request_sense(hba, sdp);
+		if (ret)
+			goto out;
+		/* Unit attention condition is cleared now */
+		hba->wlun_dev_clr_ua = false;
+	}
+out:
+	scsi_device_put(sdp);
+out_err:
+	if (ret)
+		dev_err(hba->dev, "%s: Failed UAC clear ret = %d\n", __func__, ret);
+	return ret;
+}
+
 /**
  * ufshcd_probe_hba - probe hba to detect device and initialize
  * @hba: per-adapter instance
@@ -7500,6 +7539,8 @@ static void ufshcd_async_scan(void *data, async_cookie_t cookie)
 		pm_runtime_put_sync(hba->dev);
 		ufshcd_exit_clk_scaling(hba);
 		ufshcd_hba_exit(hba);
+	} else {
+		ufshcd_clear_uac(hba);
 	}
 }
 
Signature · 1 line
2.28.0.618.gf4bc123cb7-goog
#2 lore raw

PATCH 3/6 scsi: ufs: use WQ_HIGHPRI for gating work

In reply to Jaegeuk Kim

From: Jaegeuk Kim <[email protected]>

Must have WQ_MEM_RECLAIM
``WQ_MEM_RECLAIM``
All wq which might be used in the memory reclaim paths **MUST** have this flag set. The wq is guaranteed to have at least one execution context regardless of memory pressure.

Cc Alim Akhtar <[email protected]>
Cc Avri Altman <[email protected]>
---
 drivers/scsi/ufs/ufshcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/ufs/ufshcd.c +1 -1
index 5deba03a61f75..848e33ec40639 100644
@@ -1849,7 +1849,7 @@ static void ufshcd_init_clk_gating(struct ufs_hba *hba)
 	snprintf(wq_name, ARRAY_SIZE(wq_name), "ufs_clk_gating_%d",
 		 hba->host->host_no);
 	hba->clk_gating.clk_gating_workq = alloc_ordered_workqueue(wq_name,
-							   WQ_MEM_RECLAIM);
+					WQ_MEM_RECLAIM | WQ_HIGHPRI);
 
 	hba->clk_gating.is_enabled = true;
 
Signature · 1 line
2.28.0.618.gf4bc123cb7-goog
#3 lore raw

PATCH 4/6 scsi: ufs: fix LINERESET on hibern8

In reply to Jaegeuk Kim

From: Jaegeuk Kim <[email protected]>

When testing infinite test to read sysfs entries of UFS, I got a UFS timeout with the following kernel message.

query: dev_cmd_send: seq_no=78082 tag=31, idn=2
query: ufshcd_wait_for_dev_cmd: dev_cmd request timedout, tag 31
query: __ufshcd_query_descriptor: opcode 0x01 for idn 2 failed, index 0, err = -11
-- hibern8: dme: dme_send: cmd_id=0x17 idn=0
query: ufshcd_query_descriptor: failed with error -11, retries 3
-- hibern8: ufshcd_update_uic_error: LINERESET during hibern8 enter -- hibern8: __ufshcd_uic_hibern8_enter: hibern8 enter failed. ret = -110

The problem is casued by hibern8 command issued by ufshcd_suspend(), which is not aware of query command. If autohibern8 is enabled, we actually don't need to issue hibern8 command by suspend.

Cc Alim Akhtar <[email protected]>
Cc Avri Altman <[email protected]>
---
 drivers/scsi/ufs/ufshcd.c | 20 ++++++++++++++++++--
 drivers/scsi/ufs/ufshcd.h |  1 +
 2 files changed, 19 insertions(+), 2 deletions(-)
drivers/scsi/ufs/ufshcd.c +18 -2
index 848e33ec40639..bdc82cc3824aa 100644
@@ -3079,8 +3079,12 @@ int ufshcd_query_descriptor_retry(struct ufs_hba *hba,
 	int retries;
 
 	for (retries = QUERY_REQ_RETRIES; retries > 0; retries--) {
-		err = __ufshcd_query_descriptor(hba, opcode, idn, index,
+		err = -EAGAIN;
+		down_read(&hba->query_lock);
+		if (!ufshcd_is_link_hibern8(hba))
+			err = __ufshcd_query_descriptor(hba, opcode, idn, index,
 						selector, desc_buf, buf_len);
+		up_read(&hba->query_lock);
 		if (!err || err == -EINVAL)
 			break;
 	}
@@ -8263,8 +8267,8 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 	enum ufs_pm_level pm_lvl;
 	enum ufs_dev_pwr_mode req_dev_pwr_mode;
 	enum uic_link_state req_link_state;
+	bool need_upwrite = false;
 
-	hba->pm_op_in_progress = 1;
 	if (!ufshcd_is_shutdown_pm(pm_op)) {
 		pm_lvl = ufshcd_is_runtime_pm(pm_op) ?
 			 hba->rpm_lvl : hba->spm_lvl;
@@ -8275,6 +8279,15 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 		req_link_state = UIC_LINK_OFF_STATE;
 	}
 
+	if (ufshcd_is_runtime_pm(pm_op) &&
+			req_link_state == UIC_LINK_HIBERN8_STATE &&
+			hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT) {
+		need_upwrite = true;
+		if (!down_write_trylock(&hba->query_lock))
+			return -EBUSY;
+	}
+	hba->pm_op_in_progress = 1;
+
 	/*
 	 * If we can't transition into any of the low power modes
 	 * just gate the clocks.
@@ -8403,6 +8416,8 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 	}
 
 	hba->pm_op_in_progress = 0;
+	if (need_upwrite)
+		up_write(&hba->query_lock);
 
 	if (ret)
 		ufshcd_update_reg_hist(&hba->ufs_stats.suspend_err, (u32)ret);
@@ -8894,6 +8909,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
 	mutex_init(&hba->dev_cmd.lock);
 
 	init_rwsem(&hba->clk_scaling_lock);
+	init_rwsem(&hba->query_lock);
 
 	ufshcd_init_clk_gating(hba);
 
drivers/scsi/ufs/ufshcd.h +1 -0
index 363589c0bd370..6f8e05eaf9661 100644
@@ -754,6 +754,7 @@ struct ufs_hba {
 	bool is_urgent_bkops_lvl_checked;
 
 	struct rw_semaphore clk_scaling_lock;
+	struct rw_semaphore query_lock;
 	unsigned char desc_size[QUERY_DESC_IDN_MAX];
 	atomic_t scsi_block_reqs_cnt;
 
Signature · 1 line
2.28.0.618.gf4bc123cb7-goog
#4 lore raw

Re: [PATCH 4/6] scsi: ufs: fix LINERESET on hibern8

Please ignore this patch.
Thanks.

Quoted 100 lines · Jaegeuk Kim

From: Jaegeuk Kim <[email protected]>

When testing infinite test to read sysfs entries of UFS, I got a UFS timeout with the following kernel message.

query: dev_cmd_send: seq_no=78082 tag=31, idn=2
query: ufshcd_wait_for_dev_cmd: dev_cmd request timedout, tag 31
query: __ufshcd_query_descriptor: opcode 0x01 for idn 2 failed, index 0, err = -11
-- hibern8: dme: dme_send: cmd_id=0x17 idn=0
query: ufshcd_query_descriptor: failed with error -11, retries 3
-- hibern8: ufshcd_update_uic_error: LINERESET during hibern8 enter -- hibern8: __ufshcd_uic_hibern8_enter: hibern8 enter failed. ret = -110

The problem is casued by hibern8 command issued by ufshcd_suspend(), which is not aware of query command. If autohibern8 is enabled, we actually don't need to issue hibern8 command by suspend.

Cc Alim Akhtar <[email protected]>
Cc Avri Altman <[email protected]>
---
 drivers/scsi/ufs/ufshcd.c | 20 ++++++++++++++++++--
 drivers/scsi/ufs/ufshcd.h |  1 +
 2 files changed, 19 insertions(+), 2 deletions(-)
drivers/scsi/ufs/ufshcd.c +18 -2
index 848e33ec40639..bdc82cc3824aa 100644
@@ -3079,8 +3079,12 @@ int ufshcd_query_descriptor_retry(struct ufs_hba *hba,
 	int retries;
 
 	for (retries = QUERY_REQ_RETRIES; retries > 0; retries--) {
-		err = __ufshcd_query_descriptor(hba, opcode, idn, index,
+		err = -EAGAIN;
+		down_read(&hba->query_lock);
+		if (!ufshcd_is_link_hibern8(hba))
+			err = __ufshcd_query_descriptor(hba, opcode, idn, index,
 						selector, desc_buf, buf_len);
+		up_read(&hba->query_lock);
 		if (!err || err == -EINVAL)
 			break;
 	}
@@ -8263,8 +8267,8 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 	enum ufs_pm_level pm_lvl;
 	enum ufs_dev_pwr_mode req_dev_pwr_mode;
 	enum uic_link_state req_link_state;
+	bool need_upwrite = false;
 
-	hba->pm_op_in_progress = 1;
 	if (!ufshcd_is_shutdown_pm(pm_op)) {
 		pm_lvl = ufshcd_is_runtime_pm(pm_op) ?
 			 hba->rpm_lvl : hba->spm_lvl;
@@ -8275,6 +8279,15 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 		req_link_state = UIC_LINK_OFF_STATE;
 	}
 
+	if (ufshcd_is_runtime_pm(pm_op) &&
+			req_link_state == UIC_LINK_HIBERN8_STATE &&
+			hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT) {
+		need_upwrite = true;
+		if (!down_write_trylock(&hba->query_lock))
+			return -EBUSY;
+	}
+	hba->pm_op_in_progress = 1;
+
 	/*
 	 * If we can't transition into any of the low power modes
 	 * just gate the clocks.
@@ -8403,6 +8416,8 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 	}
 
 	hba->pm_op_in_progress = 0;
+	if (need_upwrite)
+		up_write(&hba->query_lock);
 
 	if (ret)
 		ufshcd_update_reg_hist(&hba->ufs_stats.suspend_err, (u32)ret);
@@ -8894,6 +8909,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
 	mutex_init(&hba->dev_cmd.lock);
 
 	init_rwsem(&hba->clk_scaling_lock);
+	init_rwsem(&hba->query_lock);
 
 	ufshcd_init_clk_gating(hba);
 
drivers/scsi/ufs/ufshcd.h +1 -0
index 363589c0bd370..6f8e05eaf9661 100644
@@ -754,6 +754,7 @@ struct ufs_hba {
 	bool is_urgent_bkops_lvl_checked;
 
 	struct rw_semaphore clk_scaling_lock;
+	struct rw_semaphore query_lock;
 	unsigned char desc_size[QUERY_DESC_IDN_MAX];
 	atomic_t scsi_block_reqs_cnt;
 
Signature · 1 line
2.28.0.618.gf4bc123cb7-goog
#5 lore raw

PATCH 5/6 scsi: ufs: show ufs part info in error case

In reply to Jaegeuk Kim

From: Jaegeuk Kim <[email protected]>

This patch shows ufs part info in kernel messages for debugging purpose. It's useful when we only have the last kernel message.

Cc Alim Akhtar <[email protected]>
Cc Avri Altman <[email protected]>
---
 drivers/scsi/ufs/ufshcd.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/scsi/ufs/ufshcd.c +8 -0
index bdc82cc3824aa..b81c116b976ff 100644
@@ -500,6 +500,14 @@ static void ufshcd_print_tmrs(struct ufs_hba *hba, unsigned long bitmap)
 static void ufshcd_print_host_state(struct ufs_hba *hba)
 {
 	dev_err(hba->dev, "UFS Host state=%d\n", hba->ufshcd_state);
+	if (hba->sdev_ufs_device) {
+		dev_err(hba->dev, " vendor = %.8s\n",
+					hba->sdev_ufs_device->vendor);
+		dev_err(hba->dev, " model = %.16s\n",
+					hba->sdev_ufs_device->model);
+		dev_err(hba->dev, " rev = %.4s\n",
+					hba->sdev_ufs_device->rev);
+	}
 	dev_err(hba->dev, "outstanding reqs=0x%lx tasks=0x%lx\n",
 		hba->outstanding_reqs, hba->outstanding_tasks);
 	dev_err(hba->dev, "saved_err=0x%x, saved_uic_err=0x%x\n",
Signature · 1 line
2.28.0.618.gf4bc123cb7-goog
#6 lore raw

Re: [PATCH 5/6] scsi: ufs: show ufs part info in error case

Quoted 14 lines · Jaegeuk Kim
---
 drivers/scsi/ufs/ufshcd.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/scsi/ufs/ufshcd.c +0 -0
index bdc82cc3824aa..b81c116b976ff 100644
@@ -500,6 +500,14 @@ static void ufshcd_print_tmrs(struct ufs_hba
 *hba, unsigned long bitmap)
 static void ufshcd_print_host_state(struct ufs_hba *hba)
 {

drivers/scsi/ufs/ufshcd.c static void ufshcd_print_tmrs(struct ufs_hba · line 512

Quoted 10 lines
drivers/scsi/ufs/ufshcd.c +8 -0
        dev_err(hba->dev, "UFS Host state=%d\n", hba->ufshcd_state);
+       if (hba->sdev_ufs_device) {
+               dev_err(hba->dev, " vendor = %.8s\n",
+                                       hba->sdev_ufs_device-
 >vendor);
+               dev_err(hba->dev, " model = %.16s\n",
+                                       hba->sdev_ufs_device->model);
+               dev_err(hba->dev, " rev = %.4s\n",
+                                       hba->sdev_ufs_device->rev);
+       }

Hi Jaegeuk
these prints have been added since this change:

commit 3f8af6044713 ("scsi: ufs: Add some debug information to ufshcd_print_host_state()")

https://patchwork.kernel.org/patch/11694371/

Thanks,
Bean

#7 lore raw

Re: [PATCH 5/6] scsi: ufs: show ufs part info in error case

Quoted 26 lines · Bean Huo
Quoted 14 lines · Jaegeuk Kim
---
 drivers/scsi/ufs/ufshcd.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/scsi/ufs/ufshcd.c +0 -0
index bdc82cc3824aa..b81c116b976ff 100644
@@ -500,6 +500,14 @@ static void ufshcd_print_tmrs(struct ufs_hba
 *hba, unsigned long bitmap)
 static void ufshcd_print_host_state(struct ufs_hba *hba)
 {

drivers/scsi/ufs/ufshcd.c static void ufshcd_print_tmrs(struct ufs_hba · line 512

Quoted 10 lines
drivers/scsi/ufs/ufshcd.c +8 -0
        dev_err(hba->dev, "UFS Host state=%d\n", hba->ufshcd_state);
+       if (hba->sdev_ufs_device) {
+               dev_err(hba->dev, " vendor = %.8s\n",
+                                       hba->sdev_ufs_device-
 >vendor);
+               dev_err(hba->dev, " model = %.16s\n",
+                                       hba->sdev_ufs_device->model);
+               dev_err(hba->dev, " rev = %.4s\n",
+                                       hba->sdev_ufs_device->rev);
+       }
Quoted 7 lines

Hi Jaegeuk
these prints have been added since this change:

commit 3f8af6044713 ("scsi: ufs: Add some debug information to ufshcd_print_host_state()")

https://patchwork.kernel.org/patch/11694371/

Cool, thank you for pointing this out. BTW, which branch can I see the -next patches?

Quoted 3 lines

Thanks,
Bean

#8 lore raw

Re: [PATCH 5/6] scsi: ufs: show ufs part info in error case

Quoted 30 lines · Jaegeuk Kim
Quoted 29 lines · Bean Huo
Quoted 14 lines · Jaegeuk Kim
---
 drivers/scsi/ufs/ufshcd.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/scsi/ufs/ufshcd.c +0 -0
index bdc82cc3824aa..b81c116b976ff 100644
@@ -500,6 +500,14 @@ static void ufshcd_print_tmrs(struct ufs_hba
 *hba, unsigned long bitmap)
 static void ufshcd_print_host_state(struct ufs_hba *hba)
 {

drivers/scsi/ufs/ufshcd.c static void ufshcd_print_tmrs(struct ufs_hba · line 512

Quoted 10 lines
drivers/scsi/ufs/ufshcd.c +8 -0
        dev_err(hba->dev, "UFS Host state=%d\n", hba->ufshcd_state);
+       if (hba->sdev_ufs_device) {
+               dev_err(hba->dev, " vendor = %.8s\n",
+                                       hba->sdev_ufs_device-
 >vendor);
+               dev_err(hba->dev, " model = %.16s\n",
+                                       hba->sdev_ufs_device->model);
+               dev_err(hba->dev, " rev = %.4s\n",
+                                       hba->sdev_ufs_device->rev);
+       }

Hi Jaegeuk
these prints have been added since this change:

Quoted 9 lines
Quoted 4 lines

commit 3f8af6044713 ("scsi: ufs: Add some debug information to ufshcd_print_host_state()")

https://patchwork.kernel.org/patch/11694371/

Cool, thank you for pointing this out. BTW, which branch can I see the -next
patches?

Hi Jaegeuk,

This patch comes from a series of changes trying to fix and simplify the UFS error handling. You can find the whole series here - they are picked up on scsi-queue-5.10

https://lore.kernel.org/linux-scsi/[email protected]/

Besides, several more fixes for error handling based on above series are

https://lore.kernel.org/patchwork/patch/1290405/
&
https://lore.kernel.org/linux-scsi/[email protected]/

I've mainline all above changes to Android12-5.4 and Android11-5.4.

Moreover, there are 2 more fixes on the way for error handling, I will push them soon.

Thanks,

Can Guo.

Quoted 3 lines
Quoted 3 lines

Thanks,
Bean

#9 lore raw

Re: [PATCH 5/6] scsi: ufs: show ufs part info in error case

Quoted 49 lines · Can Guo
Quoted 30 lines · Jaegeuk Kim
Quoted 29 lines · Bean Huo
Quoted 14 lines · Jaegeuk Kim
---
 drivers/scsi/ufs/ufshcd.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/scsi/ufs/ufshcd.c +0 -0
index bdc82cc3824aa..b81c116b976ff 100644
@@ -500,6 +500,14 @@ static void ufshcd_print_tmrs(struct ufs_hba
 *hba, unsigned long bitmap)
 static void ufshcd_print_host_state(struct ufs_hba *hba)
 {

drivers/scsi/ufs/ufshcd.c static void ufshcd_print_tmrs(struct ufs_hba · line 512

Quoted 10 lines
drivers/scsi/ufs/ufshcd.c +8 -0
        dev_err(hba->dev, "UFS Host state=%d\n", hba->ufshcd_state);
+       if (hba->sdev_ufs_device) {
+               dev_err(hba->dev, " vendor = %.8s\n",
+                                       hba->sdev_ufs_device-
 >vendor);
+               dev_err(hba->dev, " model = %.16s\n",
+                                       hba->sdev_ufs_device->model);
+               dev_err(hba->dev, " rev = %.4s\n",
+                                       hba->sdev_ufs_device->rev);
+       }

Hi Jaegeuk
these prints have been added since this change:

Quoted 9 lines
Quoted 4 lines

commit 3f8af6044713 ("scsi: ufs: Add some debug information to ufshcd_print_host_state()")

https://patchwork.kernel.org/patch/11694371/

Cool, thank you for pointing this out. BTW, which branch can I see the -next
patches?

Hi Jaegeuk,

This patch comes from a series of changes trying to fix and simplify the UFS error handling. You can find the whole series here - they are picked up on scsi-queue-5.10

https://lore.kernel.org/linux-scsi/[email protected]/

Quoted 7 lines

Besides, several more fixes for error handling based on above series are

https://lore.kernel.org/patchwork/patch/1290405/
&
https://lore.kernel.org/linux-scsi/[email protected]/

I've mainline all above changes to Android12-5.4 and Android11-5.4.

I've seen the patches in Android branches. Thank you for the explanation.

Quoted 3 lines

Moreover, there are 2 more fixes on the way for error handling, I will push them soon.

BTW, could you please take a look at these patches?

Thanks,

Quoted 8 lines

Thanks,

Can Guo.

Quoted 3 lines
Quoted 3 lines

Thanks,
Bean

#10 lore raw

Re: [PATCH 5/6] scsi: ufs: show ufs part info in error case

Quoted 61 lines · Jaegeuk Kim
Quoted 49 lines · Can Guo
Quoted 30 lines · Jaegeuk Kim
Quoted 29 lines · Bean Huo
Quoted 14 lines · Jaegeuk Kim
---
 drivers/scsi/ufs/ufshcd.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/scsi/ufs/ufshcd.c +0 -0
index bdc82cc3824aa..b81c116b976ff 100644
@@ -500,6 +500,14 @@ static void ufshcd_print_tmrs(struct ufs_hba
 *hba, unsigned long bitmap)
 static void ufshcd_print_host_state(struct ufs_hba *hba)
 {

drivers/scsi/ufs/ufshcd.c static void ufshcd_print_tmrs(struct ufs_hba · line 512

Quoted 10 lines
drivers/scsi/ufs/ufshcd.c +8 -0
        dev_err(hba->dev, "UFS Host state=%d\n", hba->ufshcd_state);
+       if (hba->sdev_ufs_device) {
+               dev_err(hba->dev, " vendor = %.8s\n",
+                                       hba->sdev_ufs_device-
 >vendor);
+               dev_err(hba->dev, " model = %.16s\n",
+                                       hba->sdev_ufs_device->model);
+               dev_err(hba->dev, " rev = %.4s\n",
+                                       hba->sdev_ufs_device->rev);
+       }

Hi Jaegeuk
these prints have been added since this change:

Quoted 9 lines
Quoted 4 lines

commit 3f8af6044713 ("scsi: ufs: Add some debug information to ufshcd_print_host_state()")

https://patchwork.kernel.org/patch/11694371/

Cool, thank you for pointing this out. BTW, which branch can I see the -next
patches?

Hi Jaegeuk,

This patch comes from a series of changes trying to fix and simplify the UFS error handling. You can find the whole series here - they are picked up on scsi-queue-5.10

https://lore.kernel.org/linux-scsi/[email protected]/

Quoted 7 lines

Besides, several more fixes for error handling based on above series are

https://lore.kernel.org/patchwork/patch/1290405/
&
https://lore.kernel.org/linux-scsi/[email protected]/

I've mainline all above changes to Android12-5.4 and Android11-5.4.

I've seen the patches in Android branches. Thank you for the explanation.

Quoted 1 line
Quoted 7 lines
Quoted 2 lines

Moreover, there are 2 more fixes on the way for error handling, I will push them soon.

BTW, could you please take a look at these patches?

Thanks,

Sure, but since I am not in your cc or to list, so I don't know which patches. Maybe you can add me when you push the next version? Thanks.

Regards,

Can Guo.

Quoted 8 lines
Quoted 8 lines

Thanks,

Can Guo.

Quoted 3 lines
Quoted 3 lines

Thanks,
Bean

#11 lore raw

PATCH 6/6 scsi: add more contexts in the ufs tracepoints

In reply to Jaegeuk Kim

From: Jaegeuk Kim <[email protected]>

This adds user-friendly tracepoints with group id.

Cc Alim Akhtar <[email protected]>
Cc Avri Altman <[email protected]>
---
 drivers/scsi/ufs/ufshcd.c  |  6 ++++--
 include/trace/events/ufs.h | 21 +++++++++++++++++----
 2 files changed, 21 insertions(+), 6 deletions(-)
drivers/scsi/ufs/ufshcd.c +4 -2
index b81c116b976ff..d70ca62c4c6d0 100644
@@ -336,7 +336,7 @@ static void ufshcd_add_command_trace(struct ufs_hba *hba,
 		unsigned int tag, const char *str)
 {
 	sector_t lba = -1;
-	u8 opcode = 0;
+	u8 opcode = 0, group_id = 0;
 	u32 intr, doorbell;
 	struct ufshcd_lrb *lrbp = &hba->lrb[tag];
 	struct scsi_cmnd *cmd = lrbp->cmd;
@@ -362,13 +362,15 @@ static void ufshcd_add_command_trace(struct ufs_hba *hba,
 				lba = cmd->request->bio->bi_iter.bi_sector;
 			transfer_len = be32_to_cpu(
 				lrbp->ucd_req_ptr->sc.exp_data_transfer_len);
+			if (opcode == WRITE_10)
+				group_id = lrbp->cmd->cmnd[6];
 		}
 	}
 
 	intr = ufshcd_readl(hba, REG_INTERRUPT_STATUS);
 	doorbell = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
 	trace_ufshcd_command(dev_name(hba->dev), str, tag,
-				doorbell, transfer_len, intr, lba, opcode);
+			doorbell, transfer_len, intr, lba, opcode, group_id);
 }
 
 static void ufshcd_print_clk_freqs(struct ufs_hba *hba)
include/trace/events/ufs.h +17 -4
index 84841b3a7ffd5..50654f3526392 100644
@@ -11,6 +11,15 @@
 
 #include <linux/tracepoint.h>
 
+#define str_opcode(opcode)						\
+	__print_symbolic(opcode,					\
+		{ WRITE_16,		"WRITE_16" },			\
+		{ WRITE_10,		"WRITE_10" },			\
+		{ READ_16,		"READ_16" },			\
+		{ READ_10,		"READ_10" },			\
+		{ SYNCHRONIZE_CACHE,	"SYNC" },			\
+		{ UNMAP,		"UNMAP" })
+
 #define UFS_LINK_STATES			\
 	EM(UIC_LINK_OFF_STATE)		\
 	EM(UIC_LINK_ACTIVE_STATE)	\
@@ -215,9 +224,10 @@ DEFINE_EVENT(ufshcd_template, ufshcd_init,
 TRACE_EVENT(ufshcd_command,
 	TP_PROTO(const char *dev_name, const char *str, unsigned int tag,
 			u32 doorbell, int transfer_len, u32 intr, u64 lba,
-			u8 opcode),
+			u8 opcode, u8 group_id),
 
-	TP_ARGS(dev_name, str, tag, doorbell, transfer_len, intr, lba, opcode),
+	TP_ARGS(dev_name, str, tag, doorbell, transfer_len,
+				intr, lba, opcode, group_id),
 
 	TP_STRUCT__entry(
 		__string(dev_name, dev_name)
@@ -228,6 +238,7 @@ TRACE_EVENT(ufshcd_command,
 		__field(u32, intr)
 		__field(u64, lba)
 		__field(u8, opcode)
+		__field(u8, group_id)
 	),
 
 	TP_fast_assign(
@@ -239,13 +250,15 @@ TRACE_EVENT(ufshcd_command,
 		__entry->intr = intr;
 		__entry->lba = lba;
 		__entry->opcode = opcode;
+		__entry->group_id = group_id;
 	),
 
 	TP_printk(
-		"%s: %s: tag: %u, DB: 0x%x, size: %d, IS: %u, LBA: %llu, opcode: 0x%x",
+		"%s: %s: tag: %u, DB: 0x%x, size: %d, IS: %u, LBA: %llu, opcode: 0x%x (%s), group_id: 0x%x",
 		__get_str(str), __get_str(dev_name), __entry->tag,
 		__entry->doorbell, __entry->transfer_len,
-		__entry->intr, __entry->lba, (u32)__entry->opcode
+		__entry->intr, __entry->lba, (u32)__entry->opcode,
+		str_opcode(__entry->opcode), (u32)__entry->group_id
 	)
 );
 
Signature · 1 line
2.28.0.618.gf4bc123cb7-goog