sphinx: toaster-manual: fix vars, links, code blocks
PATCH 1/1 sphinx: toaster-manual: fix vars, links, code blocks
From: Tim Orling <[email protected]>
Also update Django links to 2.2 LTS release (from 1.11) Replace most references to 'rocko' with variable
--- .../toaster-manual/toaster-manual-intro.rst | 5 +- .../toaster-manual-reference.rst | 388 ++++++++++------ .../toaster-manual-setup-and-use.rst | 413 +++++++++++++----- .../toaster-manual/toaster-manual-start.rst | 33 +- 4 files changed, 576 insertions(+), 263 deletions(-)
documentation/toaster-manual/toaster-manual-intro.rst +2 -3
@@ -26,8 +26,7 @@ extensive information about the build process. Yocto Project releases 1.8 and beyond. With the Toaster web interface, you can: - - Browse layers listed in the various `layer - sources <#layer-source>`__ that are available in your project + - Browse layers listed in the various :ref:`layer sources <toaster-layer-source>` that are available in your project (e.g. the OpenEmbedded Layer Index at http://layers.openembedded.org/layerindex/).
@@ -78,7 +77,7 @@ extensive information about the build process. - See performance information such as build time, task time, CPU usage, and disk I/O. -For an overview of Toaster shipped with the Yocto Project DISTRO +For an overview of Toaster shipped with the Yocto Project &DISTRO; Release, see the "`Toaster - Yocto Project 2.2 <https://youtu.be/BlXdOYLgPxA>`__" video.
documentation/toaster-manual/toaster-manual-reference.rst +255 -133
526 lines not on this page · raw message
documentation/toaster-manual/toaster-manual-setup-and-use.rst +295 -118
547 lines not on this page · raw message
documentation/toaster-manual/toaster-manual-start.rst +24 -9
@@ -14,11 +14,13 @@ Setting Up the Basic System Requirements Before you can use Toaster, you need to first set up your build system to run the Yocto Project. To do this, follow the instructions in the -"`Preparing the Build -Host <&YOCTO_DOCS_DEV_URL;#dev-preparing-the-build-host>`__" section of +":ref:`dev-manual/dev-manual-start:preparing the build host`" section of the Yocto Project Development Tasks Manual. For Ubuntu/Debian, you might -also need to do an additional install of pip3. $ sudo apt-get install -python3-pip +also need to do an additional install of pip3. + +.. code-block:: shell + + $ sudo apt-get install python3-pip .. _toaster-establishing-toaster-system-dependencies:
@@ -39,10 +41,23 @@ Install Toaster Packages ------------------------ You need to install the packages that Toaster requires. Use this -command: $ pip3 install --user -r bitbake/toaster-requirements.txt The -previous command installs the necessary Toaster modules into a local +command: + +.. code-block:: shell + + $ pip3 install --user -r bitbake/toaster-requirements.txt + +The previous command installs the necessary Toaster modules into a local python 3 cache in your ``$HOME`` directory. The caches is actually located in ``$HOME/.local``. To see what packages have been installed -into your ``$HOME`` directory, do the following: $ pip3 list installed ---local If you need to remove something, the following works: $ pip3 -uninstall PackageNameToUninstall +into your ``$HOME`` directory, do the following: + +.. code-block:: shell + + $ pip3 list installed --local + +If you need to remove something, the following works: + +.. code-block:: shell + + $ pip3 uninstall PackageNameToUninstall
Signature · 1 line
2.25.0
hi Tim!
many thanks for sending this out! it looks pretty good, I have left some review comments below.
Quoted 19 lines · Tim Orling
From: Tim Orling <[email protected]>
Also update Django links to 2.2 LTS release (from 1.11) Replace most references to 'rocko' with variable
Signed-off-by Tim Orling <[email protected]>--- .../toaster-manual/toaster-manual-intro.rst | 5 +- .../toaster-manual-reference.rst | 388 ++++++++++------ .../toaster-manual-setup-and-use.rst | 413 +++++++++++++----- .../toaster-manual/toaster-manual-start.rst | 33 +- 4 files changed, 576 insertions(+), 263 deletions(-)documentation/toaster-manual/toaster-manual-intro.rst +0
-0
documentation/toaster-manual/toaster-manual-intro.rst extensive information about the build process. · line 29
Quoted 6 lines
documentation/toaster-manual/toaster-manual-intro.rst +1
-2@@ -26,8 +26,7 @@ extensive information about the build process. Yocto Project releases 1.8 and beyond. With the Toaster web interface, you can: - - Browse layers listed in the various `layer - sources <#layer-source>`__ that are available in your project + - Browse layers listed in the various :ref:`layer sources <toaster-layer-source>` that are available in your project
in the rest of the docs , we've used the links generated by autosectionlabel extension.
https://www.sphinx-doc.org/en/master/usage/extensions/autosectionlabel.html
This extension automatically creates a label for each section, instead of requiring us to manually create/manage custom labels. The custom labels were created by pandoc because they existed in Docbook (and were manually managed).
That said, I can merge as it is. I plan on removing all custom labels eventually, but I don't think we need that for 3.2, it can be done later globally.
Quoted 26 lines
documentation/toaster-manual/toaster-manual-intro.rst +1
-1(e.g. the OpenEmbedded Layer Index at http://layers.openembedded.org/layerindex/).@@ -78,7 +77,7 @@ extensive information about the build process. - See performance information such as build time, task time, CPU usage, and disk I/O. -For an overview of Toaster shipped with the Yocto Project DISTRO +For an overview of Toaster shipped with the Yocto Project &DISTRO; Release, see the "`Toaster - Yocto Project 2.2 <https://youtu.be/BlXdOYLgPxA>`__" video.documentation/toaster-manual/toaster-manual-reference.rst +2
-0@@ -13,6 +13,8 @@ Information on ``manage.py`` commands does exist across the Web and the information in this manual by no means attempts to provide a command comprehensive reference. +.. _toaster-layer-source: + Layer Source ============
documentation/toaster-manual/toaster-manual-reference.rst Use the Administration Interface · line 103
Quoted 5 lines
documentation/toaster-manual/toaster-manual-reference.rst +1
-1@@ -98,7 +100,9 @@ Use the Administration Interface Access the administration interface through a browser by entering the URL of your Toaster instance and adding "``/admin``" to the end of the URL. As an example, if you are running Toaster locally, use the -following URL: http://127.0.0.1:8000/admin +following URL: ::
I just learned from Mark that ": ::" can be replaced by "::", it's equivalent. You can keep it like that. I will do a global replacement of all occurences. Just mentioning for your next contributions ;)
Quoted 6 lines
documentation/toaster-manual/toaster-manual-reference.rst +2
-0+ + http://127.0.0.1:8000/admin The administration interface has a "Layer sources" section that includes an "Add layer source" button. Click that button and provide the required
documentation/toaster-manual/toaster-manual-reference.rst Use the Fixture Feature · line 117
Quoted 10 lines
documentation/toaster-manual/toaster-manual-reference.rst +1
-6@@ -110,12 +114,17 @@ Use the Fixture Feature The Django fixture feature overrides the default layer server when you use it to specify a custom URL. To use the fixture feature, create (or edit) the file ``bitbake/lib/toaster.orm/fixtures/custom.xml``, and then -set the following Toaster setting to your custom URL: <?xml -version="1.0" ?> <django-objects version="1.0"> <object -model="orm.toastersetting" pk="100"> <field name="name" -type="CharField">CUSTOM_LAYERINDEX_SERVER</field> <field name="value" -type="CharField">https://layers.my_organization.org/layerindex/branch/master/layers/</field> -</object> <django-objects> When you start Toaster for the first time, or +set the following Toaster setting to your custom URL: ::
for XML wouldn't the rendering be better with
.. code-block: xml
Sphinx uses Pygments for code highlights.
the default hightlight mode is python for each file. If you want to globally change the default mode for a given file, you can do:
.. highlight:: shell
after this statement shell will be used for :: blocks.
Quoted 36 lines
documentation/toaster-manual/toaster-manual-reference.rst +19
-4+ + <?xml version="1.0" ?> + <django-objects version="1.0"> + <object model="orm.toastersetting" pk="100"> + <field name="name" type="CharField">CUSTOM_LAYERINDEX_SERVER</field> + <field name="value" type="CharField">https://layers.my_organization.org/layerindex/branch/master/layers/</field> + </object> + <django-objects> + +When you start Toaster for the first time, or if you delete the file ``toaster.sqlite`` and restart, the database will populate cleanly from this layer index server.@@ -125,10 +134,15 @@ is available by using the Toaster web interface. To do that, visit the your layer source should be listed there. If you change the information in your layer index server, refresh the -Toaster database by running the following command: $ -bitbake/lib/toaster/manage.py lsupdates If Toaster can reach the API -URL, you should see a message telling you that Toaster is updating the -layer source information. +Toaster database by running the following command: + +.. code-block:: shell + + $ bitbake/lib/toaster/manage.py lsupdates + + +If Toaster can reach the API URL, you should see a message telling you that +Toaster is updating the layer source information. .. _toaster-releases:@@ -157,11 +171,11 @@ to build against different revisions of OpenEmbedded and BitBake. As shipped, Toaster is configured to work with the following releases:
documentation/toaster-manual/toaster-manual-reference.rst to build against different revisions of OpenEmbedded and BitBake. · line 178
Quoted 10 lines
documentation/toaster-manual/toaster-manual-reference.rst +4
-4-- *Yocto Project DISTRO "DISTRO_NAME" or OpenEmbedded "DISTRO_NAME":* +- *Yocto Project &DISTRO; "&DISTRO_NAME;" or OpenEmbedded "&DISTRO_NAME;":* This release causes your Toaster projects to build against the head - of the DISTRO_NAME_NO_CAP branch at - https://git.yoctoproject.org/cgit/cgit.cgi/poky/log/?h=rocko or - http://git.openembedded.org/openembedded-core/commit/?h=rocko. + of the &DISTRO_NAME_NO_CAP; branch at + https://git.yoctoproject.org/cgit/cgit.cgi/poky/log/?h=&DISTRO_NAME_NO_CAP; or + http://git.openembedded.org/openembedded-core/commit/?h=&DISTRO_NAME_NO_CAP;.
good catch!
Quoted 187 lines
documentation/toaster-manual/toaster-manual-reference.rst +81
-61- *Yocto Project "Master" or OpenEmbedded "Master":* This release causes your Toaster Projects to build against the head of the master@@ -224,9 +238,12 @@ particularly useful if your custom configuration defines fewer releases or layers than the default fixture files. The following example sets "name" to "CUSTOM_XML_ONLY" and its value to -"True". <object model="orm.toastersetting" pk="99"> <field -type="CharField" name="name">CUSTOM_XML_ONLY</field> <field -type="CharField" name="value">True</field> </object> +"True". :: + + <object model="orm.toastersetting" pk="99"> + <field type="CharField" name="name">CUSTOM_XML_ONLY</field> + <field type="CharField" name="value">True</field> + </object> Understanding Fixture File Format ---------------------------------@@ -244,10 +261,15 @@ Defining the Default Distro and Other Values This section defines the default distro value for new projects. By default, it reserves the first Toaster Setting record "1". The following demonstrates how to set the project default value for -:term:`DISTRO`: <!-- Set the project -default value for DISTRO --> <object model="orm.toastersetting" pk="1"> -<field type="CharField" name="name">DEFCONF_DISTRO</field> <field -type="CharField" name="value">poky</field> </object> You can override +:term:`DISTRO`: :: + + <!-- Set the project default value for DISTRO --> + <object model="orm.toastersetting" pk="1"> + <field type="CharField" name="name">DEFCONF_DISTRO</field> + <field type="CharField" name="value">poky</field> + </object> + +You can override other default project values by adding additional Toaster Setting sections such as any of the settings coming from the ``settings.xml`` file. Also, you can add custom values that are included in the BitBake@@ -258,40 +280,47 @@ Defining BitBake Version ~~~~~~~~~~~~~~~~~~~~~~~~ The following defines which version of BitBake is used for the following -release selection: <!-- Bitbake versions which correspond to the -metadata release --> <object model="orm.bitbakeversion" pk="1"> <field -type="CharField" name="name">rocko</field> <field type="CharField" -name="giturl">git://git.yoctoproject.org/poky</field> <field -type="CharField" name="branch">rocko</field> <field type="CharField" -name="dirpath">bitbake</field> </object> +release selection: :: + + <!-- Bitbake versions which correspond to the metadata release --> + <object model="orm.bitbakeversion" pk="1"> + <field type="CharField" name="name">&DISTRO_NAME_NO_CAP;</field> + <field type="CharField" name="giturl">git://git.yoctoproject.org/poky</field> + <field type="CharField" name="branch">&DISTRO_NAME_NO_CAP;</field> + <field type="CharField" name="dirpath">bitbake</field> + </object> .. _defining-releases: Defining Release ~~~~~~~~~~~~~~~~ -The following defines the releases when you create a new project. <!-- -Releases available --> <object model="orm.release" pk="1"> <field -type="CharField" name="name">rocko</field> <field type="CharField" -name="description">Yocto Project 2.4 "Rocko"</field> <field -rel="ManyToOneRel" to="orm.bitbakeversion" -name="bitbake_version">1</field> <field type="CharField" -name="branch_name">rocko</field> <field type="TextField" -name="helptext">Toaster will run your builds using the tip of the <a -href="http://git.yoctoproject.org/cgit/cgit.cgi/poky/log/?h=rocko">Yocto -Project Rocko branch</a>.</field> </object> The "pk" value must match -the above respective BitBake version record. +The following defines the releases when you create a new project. :: + + <!-- Releases available --> + <object model="orm.release" pk="1"> + <field type="CharField" name="name">&DISTRO_NAME_NO_CAP;</field> + <field type="CharField" name="description">Yocto Project &DISTRO; "&DISTRO_NAME;"</field> + <field rel="ManyToOneRel" to="orm.bitbakeversion" name="bitbake_version">1</field> + <field type="CharField" name="branch_name">&DISTRO_NAME_NO_CAP;</field> + <field type="TextField" name="helptext">Toaster will run your builds using the tip of the <a href="http://git.yoctoproject.org/cgit/cgit.cgi/poky/log/?h=&DISTRO_NAME_NO_CAP;">Yocto Project &DISTRO_NAME; branch</a>.</field> + </object> + +The "pk" value must match the above respective BitBake version record. Defining the Release Default Layer Names ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -The following defines the default layers for each release: <!-- Default -project layers for each release --> <object -model="orm.releasedefaultlayer" pk="1"> <field rel="ManyToOneRel" -to="orm.release" name="release">1</field> <field type="CharField" -name="layer_name">openembedded-core</field> </object> The 'pk' values in -the example above should start at "1" and increment uniquely. You can -use the same layer name in multiple releases. +The following defines the default layers for each release: :: + + <!-- Default project layers for each release --> + <object model="orm.releasedefaultlayer" pk="1"> + <field rel="ManyToOneRel" to="orm.release" name="release">1</field> + <field type="CharField" name="layer_name">openembedded-core</field> + </object> + +The 'pk' values in the example above should start at "1" and increment +uniquely. You can use the same layer name in multiple releases. Defining Layer Definitions ~~~~~~~~~~~~~~~~~~~~~~~~~~@@ -301,36 +330,41 @@ the layers, and then defines the exact layer version of the layer used for each respective release. You must have one ``orm.layer`` entry for each layer. Then, with each entry you need a set of ``orm.layer_version`` entries that connects the layer with each release -that includes the layer. In general all releases include the layer. -<object model="orm.layer" pk="1"> <field type="CharField" -name="name">openembedded-core</field> <field type="CharField" -name="layer_index_url"></field> <field type="CharField" -name="vcs_url">git://git.yoctoproject.org/poky</field> <field -type="CharField" -name="vcs_web_url">http://git.yoctoproject.org/cgit/cgit.cgi/poky</field> -<field type="CharField" -name="vcs_web_tree_base_url">http://git.yoctoproject.org/cgit/cgit.cgi/poky/tree/%path%?h=%branch%</field> -<field type="CharField" -name="vcs_web_file_base_url">http://git.yoctoproject.org/cgit/cgit.cgi/poky/tree/%path%?h=%branch%</field> -</object> <object model="orm.layer_version" pk="1"> <field -rel="ManyToOneRel" to="orm.layer" name="layer">1</field> <field -type="IntegerField" name="layer_source">0</field> <field -rel="ManyToOneRel" to="orm.release" name="release">1</field> <field -type="CharField" name="branch">rocko</field> <field type="CharField" -name="dirpath">meta</field> </object> <object model="orm.layer_version" -pk="2"> <field rel="ManyToOneRel" to="orm.layer" name="layer">1</field> -<field type="IntegerField" name="layer_source">0</field> <field -rel="ManyToOneRel" to="orm.release" name="release">2</field> <field -type="CharField" name="branch">HEAD</field> <field type="CharField" -name="commit">HEAD</field> <field type="CharField" -name="dirpath">meta</field> </object> <object model="orm.layer_version" -pk="3"> <field rel="ManyToOneRel" to="orm.layer" name="layer">1</field> -<field type="IntegerField" name="layer_source">0</field> <field -rel="ManyToOneRel" to="orm.release" name="release">3</field> <field -type="CharField" name="branch">master</field> <field type="CharField" -name="dirpath">meta</field> </object> The layer "pk" values above must -be unique, and typically start at "1". The layer version "pk" values -must also be unique across all layers, and typically start at "1". +that includes the layer. In general all releases include the layer. :: + + <object model="orm.layer" pk="1"> + <field type="CharField" name="name">openembedded-core</field> + <field type="CharField" name="layer_index_url"></field> + <field type="CharField" name="vcs_url">git://git.yoctoproject.org/poky</field> + <field type="CharField" name="vcs_web_url">http://git.yoctoproject.org/cgit/cgit.cgi/poky</field> + <field type="CharField" name="vcs_web_tree_base_url">http://git.yoctoproject.org/cgit/cgit.cgi/poky/tree/%path%?h=%branch%</field> + <field type="CharField" name="vcs_web_file_base_url">http://git.yoctoproject.org/cgit/cgit.cgi/poky/tree/%path%?h=%branch%</field> + </object> + <object model="orm.layer_version" pk="1"> + <field rel="ManyToOneRel" to="orm.layer" name="layer">1</field> + <field type="IntegerField" name="layer_source">0</field> + <field rel="ManyToOneRel" to="orm.release" name="release">1</field> + <field type="CharField" name="branch">&DISTRO_NAME_NO_CAP;</field> + <field type="CharField" name="dirpath">meta</field> + </object> <object model="orm.layer_version" pk="2"> + <field rel="ManyToOneRel" to="orm.layer" name="layer">1</field> + <field type="IntegerField" name="layer_source">0</field> + <field rel="ManyToOneRel" to="orm.release" name="release">2</field> + <field type="CharField" name="branch">HEAD</field> + <field type="CharField" name="commit">HEAD</field> + <field type="CharField" name="dirpath">meta</field> + </object> + <object model="orm.layer_version" pk="3"> + <field rel="ManyToOneRel" to="orm.layer" name="layer">1</field> + <field type="IntegerField" name="layer_source">0</field> + <field rel="ManyToOneRel" to="orm.release" name="release">3</field> + <field type="CharField" name="branch">master</field> + <field type="CharField" name="dirpath">meta</field> + </object> + +The layer "pk" values above must be unique, and typically start at "1". The +layer version "pk" values must also be unique across all layers, and typically +start at "1". Remote Toaster Monitoring =========================@@ -350,41 +384,83 @@ Checking Health Before you use remote Toaster monitoring, you should do a health check. To do this, ping the Toaster server using the following call to see if
documentation/toaster-manual/toaster-manual-reference.rst Checking Health · line 392
Quoted 10 lines
documentation/toaster-manual/toaster-manual-reference.rst +6
-4-it is still alive: http://host:port/health Be sure to provide values for -host and port. If the server is alive, you will get the response HTML: -<!DOCTYPE html> <html lang="en"> <head><title>Toaster -Health</title></head> <body>Ok</body> </html> +it is still alive: :: + + http://host:port/health + +Be sure to provide values for host and port. If the server is alive, you will +get the response HTML: ::
html pygment?
Quoted 37 lines
documentation/toaster-manual/toaster-manual-reference.rst +21
-11+ + <!DOCTYPE html> + <html lang="en"> + <head><title>Toaster Health</title></head> + <body>Ok</body> + </html> Determining Status of Builds in Progress ---------------------------------------- Sometimes it is useful to determine the status of a build in progress. -To get the status of pending builds, use the following call: -http://host:port/toastergui/api/building Be sure to provide values for -host and port. The output is a JSON file that itemizes all builds in -progress. This file includes the time in seconds since each respective -build started as well as the progress of the cloning, parsing, and task -execution. The following is sample output for a build in progress: -{"count": 1, "building": [ {"machine": "beaglebone", "seconds": -"463.869", "task": "927:2384", "distro": "poky", "clone": "1:1", "id": -2, "start": "2017-09-22T09:31:44.887Z", "name": "20170922093200", -"parse": "818:818", "project": "my_rocko", "target": -"core-image-minimal" }] } The JSON data for this query is returned in a +To get the status of pending builds, use the following call: :: + + http://host:port/toastergui/api/building + +Be sure to provide values for host and port. The output is a JSON file that +itemizes all builds in progress. This file includes the time in seconds since +each respective build started as well as the progress of the cloning, parsing, +and task execution. The following is sample output for a build in progress: :: + + {"count": 1, + "building": [ + {"machine": "beaglebone", + "seconds": "463.869", + "task": "927:2384", + "distro": "poky",
documentation/toaster-manual/toaster-manual-reference.rst Checking Health · line 428
Quoted 10 lines
documentation/toaster-manual/toaster-manual-reference.rst +10
-0+ "clone": "1:1", + "id": 2, + "start": "2017-09-22T09:31:44.887Z", + "name": "20170922093200", + "parse": "818:818", + "project": "my_rocko", + "target": "core-image-minimal" + }] + } +
JSON pygment?
Quoted 70 lines
documentation/toaster-manual/toaster-manual-reference.rst +35
-17+The JSON data for this query is returned in a single line. In the previous example the line has been artificially split for readability. +.. _toaster-checking-status-of-builds-completed: + Checking Status of Builds Completed ----------------------------------- Once a build is completed, you get the status when you use the following -call: http://host:port/toastergui/api/builds Be sure to provide values -for host and port. The output is a JSON file that itemizes all complete -builds, and includes build summary information. The following is sample -output for a completed build: {"count": 1, "builds": [ {"distro": -"poky", "errors": 0, "machine": "beaglebone", "project": "my_rocko", -"stop": "2017-09-22T09:26:36.017Z", "target": "quilt-native", "seconds": -"78.193", "outcome": "Succeeded", "id": 1, "start": -"2017-09-22T09:25:17.824Z", "warnings": 1, "name": "20170922092618" }] } +call: :: + + http://host:port/toastergui/api/builds + +Be sure to provide values for host and port. The output is a JSON file that +itemizes all complete builds, and includes build summary information. The +following is sample output for a completed build: :: + + {"count": 1, + "builds": [ + {"distro": "poky", + "errors": 0, + "machine": "beaglebone", + "project": "my_rocko", + "stop": "2017-09-22T09:26:36.017Z", + "target": "quilt-native", + "seconds": "78.193", + "outcome": "Succeeded", + "id": 1, + "start": "2017-09-22T09:25:17.824Z", + "warnings": 1, + "name": "20170922092618" + }] + } + The JSON data for this query is returned in a single line. In the previous example the line has been artificially split for readability.@@ -392,22 +468,37 @@ Determining Status of a Specific Build -------------------------------------- Sometimes it is useful to determine the status of a specific build. To -get the status of a specific build, use the following call: -http://host:port/toastergui/api/build/ID Be sure to provide values for +get the status of a specific build, use the following call: :: + + http://host:port/toastergui/api/build/ID + +Be sure to provide values for host, port, and ID. You can find the value for ID from the Builds -Completed query. See the "`Checking Status of Builds -Completed <#checking-status-of-builds-completed>`__" section for more -information. +Completed query. See the ":ref:`toaster-checking-status-of-builds-completed`" +section for more information. The output is a JSON file that itemizes the specific build and includes build summary information. The following is sample output for a specific -build: {"build": {"distro": "poky", "errors": 0, "machine": -"beaglebone", "project": "my_rocko", "stop": "2017-09-22T09:26:36.017Z", -"target": "quilt-native", "seconds": "78.193", "outcome": "Succeeded", -"id": 1, "start": "2017-09-22T09:25:17.824Z", "warnings": 1, "name":
documentation/toaster-manual/toaster-manual-reference.rst Determining Status of a Specific Build · line 488
Quoted 10 lines
documentation/toaster-manual/toaster-manual-reference.rst +7
-3-"20170922092618", "cooker_log": -"/opt/user/poky/build-toaster-2/tmp/log/cooker/beaglebone/build_20170922_022607.991.log" -} } The JSON data for this query is returned in a single line. In the +build: :: + + {"build": + {"distro": "poky", + "errors": 0, + "machine": "beaglebone", + "project": "my_rocko",
my_&DISTRO_NAME_NO_CAP;?
Quoted 151 lines
documentation/toaster-manual/toaster-manual-reference.rst +66
-22+ "stop": "2017-09-22T09:26:36.017Z", + "target": "quilt-native", + "seconds": "78.193", + "outcome": "Succeeded", + "id": 1, + "start": "2017-09-22T09:25:17.824Z", + "warnings": 1, + "name": "20170922092618", + "cooker_log": "/opt/user/poky/build-toaster-2/tmp/log/cooker/beaglebone/build_20170922_022607.991.log" + } + } + +The JSON data for this query is returned in a single line. In the previous example the line has been artificially split for readability. .. _toaster-useful-commands:@@ -419,7 +510,7 @@ In addition to the web user interface and the scripts that start and stop Toaster, command-line commands exist through the ``manage.py`` management script. You can find general documentation on ``manage.py`` at the -`Django <https://docs.djangoproject.com/en/1.7/topics/settings/>`__ +`Django <https://docs.djangoproject.com/en/2.2/topics/settings/>`__ site. However, several ``manage.py`` commands have been created that are specific to Toaster and are used to control configuration and back-end tasks. You can locate these commands in the@@ -446,19 +537,30 @@ tasks. You can locate these commands in the -------------- The ``buildslist`` command lists all builds that Toaster has recorded. -Access the command as follows: $ bitbake/lib/toaster/manage.py -buildslist The command returns a list, which includes numeric +Access the command as follows: + +.. code-block:: shell + + $ bitbake/lib/toaster/manage.py buildslist + +The command returns a list, which includes numeric identifications, of the builds that Toaster has recorded in the current database. You need to run the ``buildslist`` command first to identify existing builds in the database before using the -```builddelete`` <#toaster-command-builddelete>`__ command. Here is an -example that assumes default repository and build directory names: $ cd -~/poky/build $ python ../bitbake/lib/toaster/manage.py buildslist If -your Toaster database had only one build, the above ``buildslist`` -command would return something like the following: 1: qemux86 poky -core-image-minimal +:ref:`toaster-command-builddelete` command. Here is an +example that assumes default repository and build directory names: + +.. code-block:: shell + + $ cd ~/poky/build + $ python ../bitbake/lib/toaster/manage.py buildslist + +If your Toaster database had only one build, the above ``buildslist`` +command would return something like the following: :: + + 1: qemux86 poky core-image-minimal .. _toaster-command-builddelete:@@ -473,7 +575,7 @@ the database. Prior to running the ``builddelete`` command, you need to get the ID associated with builds by using the -```buildslist`` <#toaster-command-buildslist>`__ command. +:ref:`toaster-command-buildslist` command. .. _toaster-command-perf:@@ -481,9 +583,14 @@ associated with builds by using the -------- The ``perf`` command measures Toaster performance. Access the command as -follows: $ bitbake/lib/toaster/manage.py perf The command is a sanity -check that returns page loading times in order to identify performance -problems. +follows: + +.. code-block:: shell + + $ bitbake/lib/toaster/manage.py perf + +The command is a sanity check that returns page loading times in order to +identify performance problems. .. _toaster-command-checksettings:@@ -491,7 +598,12 @@ problems. ----------------- The ``checksettings`` command verifies existing Toaster settings. Access -the command as follows: $ bitbake/lib/toaster/manage.py checksettings +the command as follows: + +.. code-block:: shell + + $ bitbake/lib/toaster/manage.py checksettings + Toaster uses settings that are based on the database to configure the building tasks. The ``checksettings`` command verifies that the database settings are valid in the sense that they have the minimal information@@ -499,10 +611,15 @@ needed to start a build. In order for the ``checksettings`` command to work, the database must be correctly set up and not have existing data. To be sure the database is -ready, you can run the following: $ bitbake/lib/toaster/manage.py -syncdb $ bitbake/lib/toaster/manage.py migrate orm $ -bitbake/lib/toaster/manage.py migrate bldcontrol After running these -commands, you can run the ``checksettings`` command. +ready, you can run the following: + +.. code-block:: shell + + $ bitbake/lib/toaster/manage.py syncdb + $ bitbake/lib/toaster/manage.py migrate orm + $ bitbake/lib/toaster/manage.py migrate bldcontrol + +After running these commands, you can run the ``checksettings`` command. .. _toaster-command-runbuilds:@@ -510,8 +627,13 @@ commands, you can run the ``checksettings`` command. ------------- The ``runbuilds`` command launches scheduled builds. Access the command -as follows: $ bitbake/lib/toaster/manage.py runbuilds The ``runbuilds`` -command checks if scheduled builds exist in the database and then -launches them per schedule. The command returns after the builds start -but before they complete. The Toaster Logging Interface records and +as follows: + +.. code-block:: shell + + $ bitbake/lib/toaster/manage.py runbuilds + +The ``runbuilds`` command checks if scheduled builds exist in the database +and then launches them per schedule. The command returns after the builds +start but before they complete. The Toaster Logging Interface records and updates the database when the builds complete.documentation/toaster-manual/toaster-manual-setup-and-use.rst +0
-0@@ -4,32 +4,54 @@ Setting Up and Using Toaster ****************************
documentation/toaster-manual/toaster-manual-setup-and-use.rst line 14
Quoted 10 lines
documentation/toaster-manual/toaster-manual-setup-and-use.rst +4
-2+.. _toaster-starting-toaster-for-local-development: + Starting Toaster for Local Development ====================================== Once you have set up the Yocto Project and installed the Toaster system -dependencies as described in the "`Preparing to Use -Toaster <#toaster-manual-start>`__" chapter, you are ready to start +dependencies as described in the ":ref:`toaster-manual/toaster-manual-start:Preparing to Use +Toaster`" chapter, you are ready to start
right. here you are using the label created by autosectionlabel!
documentation/toaster-manual/toaster-manual-setup-and-use.rst line 20
Quoted 13 lines
documentation/toaster-manual/toaster-manual-setup-and-use.rst +3
-7Toaster. Navigate to the root of your -:term:`Source Directory` (e.g. ``poky``): $ -cd poky Once in that directory, source the build environment script: $ -source oe-init-build-env Next, from the build directory (e.g. -``poky/build``), start Toaster using this command: $ source toaster -start You can now run your builds from the command line, or with Toaster -as explained in section "`Using the Toaster Web -Interface <#using-the-toaster-web-interface>`__". +:term:`Source Directory` (e.g. ``poky``): + +.. code-block:: shell
you have plenty of code-block:: shell. You might want to switch to shell as default a bit earlier, and use :: operator instead.
Quoted 197 lines
documentation/toaster-manual/toaster-manual-setup-and-use.rst +90
-33+ + $ cd poky + +Once in that directory, source the build environment script: + +.. code-block:: shell + + $ source oe-init-build-env + +Next, from the build directory (e.g. +``poky/build``), start Toaster using this command: + +.. code-block:: shell + + $ source toaster start + +You can now run your builds from the command line, or with Toaster +as explained in section ":ref:`toaster-using-the-toaster-web-interface`". To access the Toaster web interface, open your favorite browser and -enter the following: http://127.0.0.1:8000 +enter the following: :: + + http://127.0.0.1:8000 Setting a Different Port ======================== By default, Toaster starts on port 8000. You can use the ``WEBPORT`` parameter to set a different port. For example, the following command -sets the port to "8400": $ source toaster start webport=8400 +sets the port to "8400": + +.. code-block:: shell + + $ source toaster start webport=8400 Setting Up Toaster Without a Web Server =======================================@@ -54,8 +76,13 @@ Toaster environment. Before closing the environment, however, you should allow a few minutes to ensure the complete transfer of its BitBake build statistics to the Toaster database. If you have a separate Toaster web server instance running, you can watch this command-line build’s -progress and examine the results as soon as they are posted: $ source -toaster start noweb $ bitbake target $ source toaster stop +progress and examine the results as soon as they are posted: + +.. code-block:: shell + + $ source toaster start noweb + $ bitbake target + $ source toaster stop Setting Up Toaster Without a Build Server =========================================@@ -69,23 +96,33 @@ disabled. Doing so is useful for the following: - Allowing only local command-line builds to be captured into the Toaster database. -Use the following command to set up Toaster without a build server: $ -source toaster start nobuild webport=port +Use the following command to set up Toaster without a build server: + +.. code-block:: shell + + $ source toaster start nobuild webport=port Setting up External Access ========================== -By default, Toaster binds to the loop back address (i.e. localhost), +By default, Toaster binds to the loop back address (i.e. ``localhost``), which does not allow access from external hosts. To allow external access, use the ``WEBPORT`` parameter to open an address that connects to the network, specifically the IP address that your NIC uses to connect to the network. You can also bind to all IP addresses the computer supports by using the shortcut "0.0.0.0:port". -The following example binds to all IP addresses on the host: $ source -toaster start webport=0.0.0.0:8400 This example binds to a specific IP -address on the host's NIC: $ source toaster start -webport=192.168.1.1:8400 +The following example binds to all IP addresses on the host: + +.. code-block:: shell + + $ source toaster start webport=0.0.0.0:8400 + +This example binds to a specific IP address on the host's NIC: + +.. code-block:: shell + + $ source toaster start webport=192.168.1.1:8400 The Directory for Cloning Layers ================================@@ -129,12 +166,20 @@ superuser by following these steps: 1. If you used ``pip3``, which is recommended, to set up the Toaster system dependencies, you need be sure the local user path is in your ``PATH`` list. To append the pip3 local user path, use the following - command: $ export PATH=$PATH:$HOME/.local/bin + command: + +.. code-block:: shell + + $ export PATH=$PATH:$HOME/.local/bin 2. From the directory containing the Toaster database, which by default is the :term:`Build Directory`, - invoke the ``createsuperuser`` command from ``manage.py``: $ cd - ~/poky/build $ ../bitbake/lib/toaster/manage.py createsuperuser + invoke the ``createsuperuser`` command from ``manage.py``: + +.. code-block:: shell + + $ cd ~/poky/build + $ ../bitbake/lib/toaster/manage.py createsuperuser 3. Django prompts you for the username, which you need to provide.@@ -145,15 +190,20 @@ superuser by following these steps: 6. Django prompts you to re-enter your password for verification. After completing these steps, the following confirmation message -appears: Superuser created successfully. +appears: :: + + Superuser created successfully. Creating a superuser allows you to access the Django administration interface through a browser. The URL for this interface is the same as the URL used for the Toaster instance with "/admin" on the end. For -example, if you are running Toaster locally, use the following URL: -http://127.0.0.1:8000/admin You can use the Django administration -interface to set Toaster configuration parameters such as the build -directory, layer sources, default variable values, and BitBake versions. +example, if you are running Toaster locally, use the following URL: :: + + http://127.0.0.1:8000/admin + +You can use the Django administration interface to set Toaster configuration +parameters such as the build directory, layer sources, default variable +values, and BitBake versions. .. _toaster-setting-up-a-production-instance-of-toaster:@@ -175,12 +225,10 @@ Be sure you meet the following requirements: .. note:: - You must comply with all Apache, - mod-wsgi - , and Mysql requirements. + You must comply with all Apache, ``mod-wsgi``, and Mysql requirements. -- Have all the build requirements as described in the "`Preparing to - Use Toaster <#toaster-manual-start>`__" chapter. +- Have all the build requirements as described in the ":ref:`toaster-manual/toaster-manual-start:Preparing to + Use Toaster`" chapter. - Have an Apache webserver.@@ -188,17 +236,24 @@ Be sure you meet the following requirements: - Use the Mysql database server. -- If you are using Ubuntu 16.04, run the following: $ sudo apt-get - install apache2 libapache2-mod-wsgi-py3 mysql-server python3-pip - libmysqlclient-dev +- If you are using Ubuntu, run the following: + +.. code-block:: shell + + $ sudo apt-get install apache2 libapache2-mod-wsgi-py3 mysql-server python3-pip libmysqlclient-dev + +- If you are using Fedora or a RedHat distribution, run the + following: + +.. code-block:: shell + + $ sudo dnf install httpd python3-mod_wsgi python3-pip mariadb-server mariadb-devel python3-devel + +- If you are using openSUSE, run the following: -- If you are using Fedora 24 or a RedHat distribution, run the - following: $ sudo dnf install httpd python3-mod_wsgi python3-pip - mariadb-server mariadb-devel python3-devel +.. code-block:: shell -- If you are using openSUSE Leap 42.1, run the following: $ sudo zypper - install apache2 apache2-mod_wsgi-python3 python3-pip mariadb - mariadb-client python3-devel + $ sudo zypper install apache2 apache2-mod_wsgi-python3 python3-pip mariadb mariadb-client python3-devel .. _toaster-installation-steps:
documentation/toaster-manual/toaster-manual-setup-and-use.rst Installation · line 265
Quoted 3 lines
documentation/toaster-manual/toaster-manual-setup-and-use.rst +0
-0@@ -208,18 +263,29 @@ Installation Perform the following steps to install Toaster: 1. Create toaster user and set its home directory to
numbered lists can be managed by Sphinx, instead of 1., 2. ... you can use #. for each item, it will be numbered by Sphinx.
Quoted 37 lines
documentation/toaster-manual/toaster-manual-setup-and-use.rst +19
-8- ``/var/www/toaster``: $ sudo /usr/sbin/useradd toaster -md - /var/www/toaster -s /bin/false $ sudo su - toaster -s /bin/bash + ``/var/www/toaster``: + +.. code-block:: shell + + $ sudo /usr/sbin/useradd toaster -md /var/www/toaster -s /bin/false + $ sudo su - toaster -s /bin/bash 2. Checkout a copy of ``poky`` into the web server directory. You will - be using ``/var/www/toaster``: $ git clone - git://git.yoctoproject.org/poky $ git checkout DISTRO_NAME_NO_CAP + be using ``/var/www/toaster``: + +.. code-block:: shell + + $ git clone git://git.yoctoproject.org/poky + $ git checkout &DISTRO_NAME_NO_CAP; 3. Install Toaster dependencies using the --user flag which keeps the - Python packages isolated from your system-provided packages: $ cd - /var/www/toaster/ $ pip3 install --user -r - ./poky/bitbake/toaster-requirements.txt $ pip3 install --user - mysqlclient + Python packages isolated from your system-provided packages: + + .. code-block:: shell + + $ cd /var/www/toaster/ + $ pip3 install --user -r ./poky/bitbake/toaster-requirements.txt + $ pip3 install --user mysqlclient .. note::@@ -232,30 +298,59 @@ Perform the following steps to install Toaster: as follows:
documentation/toaster-manual/toaster-manual-setup-and-use.rst Perform the following steps to install Toaster: · line 304
Quoted 10 lines
documentation/toaster-manual/toaster-manual-setup-and-use.rst +4
-5- Edit the - `DATABASES <https://docs.djangoproject.com/en/1.11/ref/settings/#databases>`__ - settings: DATABASES = { 'default': { 'ENGINE': - 'django.db.backends.mysql', 'NAME': 'toaster_data', 'USER': - 'toaster', 'PASSWORD': 'yourpasswordhere', 'HOST': 'localhost', - 'PORT': '3306', } } + `DATABASES <https://docs.djangoproject.com/en/2.2/ref/settings/#databases>`__ + settings: + + .. code-block:: shell
how does it look with python instead of shell?
Quoted 245 lines
documentation/toaster-manual/toaster-manual-setup-and-use.rst +151
-61+ + DATABASES = { + 'default': { + 'ENGINE': 'django.db.backends.mysql', + 'NAME': 'toaster_data', + 'USER': 'toaster', + 'PASSWORD': 'yourpasswordhere', + 'HOST': 'localhost', + 'PORT': '3306', + } + } - Edit the - `SECRET_KEY <https://docs.djangoproject.com/en/1.11/ref/settings/#std:setting-SECRET_KEY>`__: - SECRET_KEY = 'your_secret_key' + `SECRET_KEY <https://docs.djangoproject.com/en/2.2/ref/settings/#std:setting-SECRET_KEY>`__: + + .. code-block:: shell + + SECRET_KEY = 'your_secret_key' - Edit the - `STATIC_ROOT <https://docs.djangoproject.com/en/1.11/ref/settings/#std:setting-STATIC_ROOT>`__: - STATIC_ROOT = '/var/www/toaster/static_files/' + `STATIC_ROOT <https://docs.djangoproject.com/en/2.2/ref/settings/#std:setting-STATIC_ROOT>`__: + + .. code-block:: shell + + STATIC_ROOT = '/var/www/toaster/static_files/' -5. Add the database and user to the ``mysql`` server defined earlier: $ - mysql -u root -p mysql> CREATE DATABASE toaster_data; mysql> CREATE - USER 'toaster'@'localhost' identified by 'yourpasswordhere'; mysql> - GRANT all on toaster_data.\* to 'toaster'@'localhost'; mysql> quit +5. Add the database and user to the ``mysql`` server defined earlier: + + .. code-block:: shell + + $ mysql -u root -p + mysql> CREATE DATABASE toaster_data; + mysql> CREATE USER 'toaster'@'localhost' identified by 'yourpasswordhere'; + mysql> GRANT all on toaster_data.\* to 'toaster'@'localhost'; + mysql> quit 6. Get Toaster to create the database schema, default data, and gather - the statically-served files: $ cd /var/www/toaster/poky/ $ - ./bitbake/lib/toaster/manage.py migrate $ TOASTER_DIR=`pwd\` - TEMPLATECONF='poky' \\ ./bitbake/lib/toaster/manage.py checksettings - $ ./bitbake/lib/toaster/manage.py collectstatic In the previous + the statically-served files: + + .. code-block:: shell + + $ cd /var/www/toaster/poky/ + $ ./bitbake/lib/toaster/manage.py migrate + $ TOASTER_DIR=`pwd\` TEMPLATECONF='poky' \ + ./bitbake/lib/toaster/manage.py checksettings + $ ./bitbake/lib/toaster/manage.py collectstatic + + + In the previous example, from the ``poky`` directory, the ``migrate`` command ensures the database schema changes have propagated correctly (i.e. migrations). The next line sets the Toaster root directory@@ -264,16 +359,21 @@ Perform the following steps to install Toaster: ``TEMPLATECONF`` value reflects the contents of ``poky/.templateconf``, and by default, should include the string "poky". For more information on the Toaster configuration file, see - the "`Configuring Toaster <#configuring-toaster>`__" section. + the ":ref:`toaster-manual/toaster-manual-reference:Configuring Toaster`" section. This line also runs the ``checksettings`` command, which configures the location of the Toaster :term:`Build Directory`. The Toaster root directory ``TOASTER_DIR`` determines where the Toaster build directory is created on the file system. In the example above, - ``TOASTER_DIR`` is set as follows: /var/www/toaster/poky This - setting causes the Toaster build directory to be: - /var/www/toaster/poky/build + ``TOASTER_DIR`` is set as follows: :: + + /var/www/toaster/poky + + + This setting causes the Toaster build directory to be: :: + + /var/www/toaster/poky/build Finally, the ``collectstatic`` command is a Django framework command that collects all the statically served files into a designated@@ -287,61 +387,138 @@ Perform the following steps to install Toaster: from the Layer Index is complete. To start the default Toaster Django web server with the Toaster - database now in Mysql, use the standard start commands: $ source - oe-init-build-env $ source toaster start Additionally, if Django is - sufficient for your requirements, you can use it for your release - system and migrate later to Apache as your requirements change. + database now in Mysql, use the standard start commands: + + .. code-block:: shell + + $ source oe-init-build-env + $ source toaster start + + + Additionally, if Django is sufficient for your requirements, you can use + it for your release system and migrate later to Apache as your + requirements change. 8. Add an Apache configuration file for Toaster to your Apache web server's configuration directory. If you are using Ubuntu or Debian, - put the file here: /etc/apache2/conf-available/toaster.conf If you - are using Fedora or RedHat, put it here: - /etc/httpd/conf.d/toaster.conf If you are using OpenSUSE, put it - here: /etc/apache2/conf.d/toaster.conf Following is a sample Apache - configuration for Toaster you can follow: Alias /static - /var/www/toaster/static_files <Directory - /var/www/toaster/static_files> <IfModule mod_access_compat.c> Order - allow,deny Allow from all </IfModule> <IfModule - !mod_access_compat.c> Require all granted </IfModule> </Directory> - <Directory /var/www/toaster/poky/bitbake/lib/toaster/toastermain> - <Files "wsgi.py"> Require all granted </Files> </Directory> - WSGIDaemonProcess toaster_wsgi - python-path=/var/www/toaster/poky/bitbake/lib/toaster:/var/www/toaster/.local/lib/python3.4/site-packages - WSGIScriptAlias / - "/var/www/toaster/poky/bitbake/lib/toaster/toastermain/wsgi.py" - <Location /> WSGIProcessGroup toaster_wsgi </Location> If you are - using Ubuntu or Debian, you will need to enable the config and - module for Apache: $ sudo a2enmod wsgi $ sudo a2enconf toaster $ - chmod +x bitbake/lib/toaster/toastermain/wsgi.py Finally, restart - Apache to make sure all new configuration is loaded. For Ubuntu, - Debian, and OpenSUSE use: $ sudo service apache2 restart For Fedora - and RedHat use: $ sudo service httpd restart + put the file here: :: + + /etc/apache2/conf-available/toaster.conf + + + If you are using Fedora or RedHat, put it here: :: + + /etc/httpd/conf.d/toaster.conf + + If you are using OpenSUSE, put it here: :: + + /etc/apache2/conf.d/toaster.conf + + Following is a sample Apache configuration for Toaster you can follow: + + .. code-block:: shell + + Alias /static /var/www/toaster/static_files + <Directory /var/www/toaster/static_files> + <IfModule mod_access_compat.c> + Order allow,deny + Allow from all + </IfModule> + <IfModule !mod_access_compat.c> + Require all granted + </IfModule> + </Directory> + + <Directory /var/www/toaster/poky/bitbake/lib/toaster/toastermain> + <Files "wsgi.py"> + Require all granted + </Files> + </Directory> + + WSGIDaemonProcess toaster_wsgi python-path=/var/www/toaster/poky/bitbake/lib/toaster:/var/www/toaster/.local/lib/python3.4/site-packages + WSGIScriptAlias / "/var/www/toaster/poky/bitbake/lib/toaster/toastermain/wsgi.py" + <Location /> + WSGIProcessGroup toaster_wsgi + </Location> + + + If you are using Ubuntu or Debian, you will need to enable the config and + module for Apache: + + .. code-block:: shell + + $ sudo a2enmod wsgi + $ sudo a2enconf toaster + $ chmod +x bitbake/lib/toaster/toastermain/wsgi.py + + Finally, restart Apache to make sure all new configuration is loaded. For Ubuntu, + Debian, and OpenSUSE use: + + .. code-block:: shell + + $ sudo service apache2 restart + + For Fedora and RedHat use: + + .. code-block:: shell + + $ sudo service httpd restart 9. Prepare the systemd service to run Toaster builds. Here is a sample - configuration file for the service: [Unit] Description=Toaster - runbuilds [Service] Type=forking User=toaster - ExecStart=/usr/bin/screen -d -m -S runbuilds - /var/www/toaster/poky/bitbake/lib/toaster/runbuilds-service.sh start - ExecStop=/usr/bin/screen -S runbuilds -X quit - WorkingDirectory=/var/www/toaster/poky [Install] - WantedBy=multi-user.target Prepare the ``runbuilds-service.sh`` - script that you need to place in the + configuration file for the service: + + .. code-block:: shell + + [Unit] + Description=Toaster runbuilds + + [Service] + Type=forking User=toaster + ExecStart=/usr/bin/screen -d -m -S runbuilds /var/www/toaster/poky/bitbake/lib/toaster/runbuilds-service.sh start + ExecStop=/usr/bin/screen -S runbuilds -X quit + WorkingDirectory=/var/www/toaster/poky + + [Install] + WantedBy=multi-user.target + + + Prepare the ``runbuilds-service.sh`` script that you need to place in the ``/var/www/toaster/poky/bitbake/lib/toaster/`` directory by setting - up executable permissions: #!/bin/bash #export - http_proxy=http://proxy.host.com:8080 #export - https_proxy=http://proxy.host.com:8080 #export - GIT_PROXY_COMMAND=$HOME/bin/gitproxy cd ~/poky/ source - ./oe-init-build-env build source ../bitbake/bin/toaster $1 noweb [ - "$1" == 'start' ] && /bin/bash - -10. Run the service: # service runbuilds start Since the service is - running in a detached screen session, you can attach to it using - this command: $ sudo su - toaster $ screen -rS runbuilds You can - detach from the service again using "Ctrl-a" followed by "d" key + up executable permissions: + + .. code-block:: shell + + #!/bin/bash + + #export http_proxy=http://proxy.host.com:8080 + #export https_proxy=http://proxy.host.com:8080 + #export GIT_PROXY_COMMAND=$HOME/bin/gitproxy
documentation/toaster-manual/toaster-manual-setup-and-use.rst Perform the following steps to install Toaster: · line 505
Quoted 10 lines
documentation/toaster-manual/toaster-manual-setup-and-use.rst +10
-0+ cd ~/poky/ + source ./oe-init-build-env build + source ../bitbake/bin/toaster $1 noweb + [ "$1" == 'start' ] && /bin/bash + +10. Run the service: + + .. code-block:: shell + + # service runbuilds start
# -> $?
Quoted 85 lines
documentation/toaster-manual/toaster-manual-setup-and-use.rst +14
-2+ + Since the service is running in a detached screen session, you can + attach to it using this command: + + .. code-block:: shell + + $ sudo su - toaster + $ screen -rS runbuilds + + You can detach from the service again using "Ctrl-a" followed by "d" key combination. You can now open up a browser and start using Toaster. +.. _toaster-using-the-toaster-web-interface: + Using the Toaster Web Interface ===============================@@ -432,8 +609,8 @@ Additional Information About the Local Yocto Project Release ------------------------------------------------------------ This section only applies if you have set up Toaster for local -development, as explained in the "`Starting Toaster for Local -Development <#starting-toaster-for-local-development>`__" section. +development, as explained in the ":ref:`toaster-starting-toaster-for-local-development`" +section. When you create a project in Toaster, you will be asked to provide a name and to select a Yocto Project release. One of the release optionsdocumentation/toaster-manual/toaster-manual-start.rst +24
-10@@ -14,11 +14,13 @@ Setting Up the Basic System Requirements Before you can use Toaster, you need to first set up your build system to run the Yocto Project. To do this, follow the instructions in the -"`Preparing the Build -Host <&YOCTO_DOCS_DEV_URL;#dev-preparing-the-build-host>`__" section of +":ref:`dev-manual/dev-manual-start:preparing the build host`" section of the Yocto Project Development Tasks Manual. For Ubuntu/Debian, you might -also need to do an additional install of pip3. $ sudo apt-get install -python3-pip +also need to do an additional install of pip3. + +.. code-block:: shell + + $ sudo apt-get install python3-pip .. _toaster-establishing-toaster-system-dependencies:@@ -39,10 +41,23 @@ Install Toaster Packages ------------------------ You need to install the packages that Toaster requires. Use this -command: $ pip3 install --user -r bitbake/toaster-requirements.txt The -previous command installs the necessary Toaster modules into a local +command: + +.. code-block:: shell + + $ pip3 install --user -r bitbake/toaster-requirements.txt + +The previous command installs the necessary Toaster modules into a local python 3 cache in your ``$HOME`` directory. The caches is actually located in ``$HOME/.local``. To see what packages have been installed -into your ``$HOME`` directory, do the following: $ pip3 list installed ---local If you need to remove something, the following works: $ pip3 -uninstall PackageNameToUninstall +into your ``$HOME`` directory, do the following: + +.. code-block:: shell + + $ pip3 list installed --local + +If you need to remove something, the following works: + +.. code-block:: shell + + $ pip3 uninstall PackageNameToUninstall --2.25.0