Skip to contentSkip to conversation

nvme: return errors for hwmon init

PATCH In review Keith Busch 3 participants 3 messages Sep 17, 2020

Subsystems (2)
lore
Share & tools
lore

Keith Busch

author maintainer
#0 lore raw

PATCH 1/1 nvme: return errors for hwmon init

Initializing the nvme hwmon retrieves a log from the controller. If the controller is broken, we need to return the appropriate error so that subsequent initialization doesn't attempt to continue.

---
 drivers/nvme/host/core.c  |  7 +++++--
 drivers/nvme/host/hwmon.c | 14 ++++++--------
 drivers/nvme/host/nvme.h  |  7 +++++--
 3 files changed, 16 insertions(+), 12 deletions(-)
drivers/nvme/host/core.c +5 -2
index 02acd779666c..55fbb734d500 100644
@@ -3239,8 +3239,11 @@ int nvme_init_identify(struct nvme_ctrl *ctrl)
 	if (ret < 0)
 		return ret;
 
-	if (!ctrl->identified)
-		nvme_hwmon_init(ctrl);
+	if (!ctrl->identified) {
+		ret = nvme_hwmon_init(ctrl);
+		if (ret < 0)
+			return ret;
+	}
 
 	ctrl->identified = true;
 
drivers/nvme/host/hwmon.c +6 -8
index 412a6c97c0d8..552dbc04567b 100644
@@ -59,12 +59,8 @@ static int nvme_set_temp_thresh(struct nvme_ctrl *ctrl, int sensor, bool under,
 
 static int nvme_hwmon_get_smart_log(struct nvme_hwmon_data *data)
 {
-	int ret;
-
-	ret = nvme_get_log(data->ctrl, NVME_NSID_ALL, NVME_LOG_SMART, 0,
+	return nvme_get_log(data->ctrl, NVME_NSID_ALL, NVME_LOG_SMART, 0,
 			   NVME_CSI_NVM, &data->log, sizeof(data->log), 0);
-
-	return ret <= 0 ? ret : -EIO;
 }
 
 static int nvme_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
@@ -225,7 +221,7 @@ static const struct hwmon_chip_info nvme_hwmon_chip_info = {
 	.info	= nvme_hwmon_info,
 };
 
-void nvme_hwmon_init(struct nvme_ctrl *ctrl)
+int nvme_hwmon_init(struct nvme_ctrl *ctrl)
 {
 	struct device *dev = ctrl->dev;
 	struct nvme_hwmon_data *data;
@@ -234,7 +230,7 @@ void nvme_hwmon_init(struct nvme_ctrl *ctrl)
 
 	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
-		return;
+		return 0;
 
 	data->ctrl = ctrl;
 	mutex_init(&data->read_lock);
@@ -244,7 +240,7 @@ void nvme_hwmon_init(struct nvme_ctrl *ctrl)
 		dev_warn(ctrl->device,
 			"Failed to read smart log (error %d)\n", err);
 		devm_kfree(dev, data);
-		return;
+		return err;
 	}
 
 	hwmon = devm_hwmon_device_register_with_info(dev, "nvme", data,
@@ -254,4 +250,6 @@ void nvme_hwmon_init(struct nvme_ctrl *ctrl)
 		dev_warn(dev, "Failed to instantiate hwmon device\n");
 		devm_kfree(dev, data);
 	}
+
+	return 0;
 }
drivers/nvme/host/nvme.h +5 -2
index 9fd45ff656da..2aaedfa43ed8 100644
@@ -827,9 +827,12 @@ static inline struct nvme_ns *nvme_get_ns_from_dev(struct device *dev)
 }
 
 #ifdef CONFIG_NVME_HWMON
-void nvme_hwmon_init(struct nvme_ctrl *ctrl);
+int nvme_hwmon_init(struct nvme_ctrl *ctrl);
 #else
-static inline void nvme_hwmon_init(struct nvme_ctrl *ctrl) { }
+static inline int nvme_hwmon_init(struct nvme_ctrl *ctrl)
+{
+	return 0;
+}
 #endif
 
 u32 nvme_command_effects(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
Signature · 7 lines
2.24.1


_______________________________________________
Linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme
#1 lore raw
Quoted 6 lines · Keith Busch

Initializing the nvme hwmon retrieves a log from the controller. If the controller is broken, we need to return the appropriate error so that subsequent initialization doesn't attempt to continue.

Looks good to me. I'm about to send a PR to Jens later today, but I plan to pick this up for 5.9 after that.

_______________________________________________
Linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme