regulator: enable compile testing for Maxim and Samsung PMIC drivers
PATCH 1/1 regulator: enable compile testing for Maxim and Samsung PMIC drivers
Most of Maxim and Samsung PMIC/MUIC regulator drivers can be compile tested to increase build coverage. This allows to build them on configurations without I2C (as I2C is required by dependency - parent MFD driver).
--- drivers/regulator/Kconfig | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/regulator/Kconfig +9 -9
@@ -510,7 +510,7 @@ config REGULATOR_MAX1586 config REGULATOR_MAX77620 tristate "Maxim 77620/MAX20024 voltage regulator" - depends on MFD_MAX77620 + depends on MFD_MAX77620 || COMPILE_TEST help This driver controls Maxim MAX77620 voltage output regulator via I2C bus. The provided regulator is suitable for Tegra
@@ -519,7 +519,7 @@ config REGULATOR_MAX77620 config REGULATOR_MAX77650 tristate "Maxim MAX77650/77651 regulator support" - depends on MFD_MAX77650 + depends on MFD_MAX77650 || COMPILE_TEST help Regulator driver for MAX77650/77651 PMIC from Maxim Semiconductor. This device has a SIMO with three independent
@@ -542,7 +542,7 @@ config REGULATOR_MAX8660 config REGULATOR_MAX8907 tristate "Maxim 8907 voltage regulator" - depends on MFD_MAX8907 + depends on MFD_MAX8907 || COMPILE_TEST help This driver controls a Maxim 8907 voltage output regulator via I2C bus. The provided regulator is suitable for Tegra
@@ -592,7 +592,7 @@ config REGULATOR_MAX8998 config REGULATOR_MAX77686 tristate "Maxim 77686 regulator" - depends on MFD_MAX77686 + depends on MFD_MAX77686 || COMPILE_TEST help This driver controls a Maxim 77686 regulator via I2C bus. The provided regulator is suitable for
@@ -600,7 +600,7 @@ config REGULATOR_MAX77686 config REGULATOR_MAX77693 tristate "Maxim 77693/77843 regulator" - depends on (MFD_MAX77693 || MFD_MAX77843) + depends on MFD_MAX77693 || MFD_MAX77843 || COMPILE_TEST help This driver controls a Maxim 77693/77843 regulators via I2C bus. The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
@@ -609,7 +609,7 @@ config REGULATOR_MAX77693 config REGULATOR_MAX77802 tristate "Maxim 77802 regulator" - depends on MFD_MAX77686 + depends on MFD_MAX77686 || COMPILE_TEST help This driver controls a Maxim 77802 regulator via I2C bus. The provided regulator is suitable for
@@ -941,14 +941,14 @@ config REGULATOR_RT5033 config REGULATOR_S2MPA01 tristate "Samsung S2MPA01 voltage regulator" - depends on MFD_SEC_CORE + depends on MFD_SEC_CORE || COMPILE_TEST help This driver controls Samsung S2MPA01 voltage output regulator via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs. config REGULATOR_S2MPS11 tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator" - depends on MFD_SEC_CORE + depends on MFD_SEC_CORE || COMPILE_TEST help This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage output regulator via I2C bus. The chip is comprised of high efficient
@@ -957,7 +957,7 @@ config REGULATOR_S2MPS11 config REGULATOR_S5M8767 tristate "Samsung S5M8767A voltage regulator" - depends on MFD_SEC_CORE + depends on MFD_SEC_CORE || COMPILE_TEST help This driver supports a Samsung S5M8767A voltage output regulator via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
Signature · 1 line
2.17.1
Mark Brown
maintainerQuoted 4 lines · Krzysztof Kozlowski
Most of Maxim and Samsung PMIC/MUIC regulator drivers can be compile tested to increase build coverage. This allows to build them on configurations without I2C (as I2C is required by dependency - parent MFD driver).
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next
Thanks!
[1/1] regulator: enable compile testing for Maxim and Samsung PMIC drivers
commit: 0c7d1b4d0c1e7c4309e01532b811392b11b81693
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark