4.14.199-rc1 review

From: Dinh Nguyen <[email protected]>

[ Upstream commit 0ff5a4812be4ebd4782bbb555d369636eea164f7 ]

Fixes the register address for the timer3 entry on Arria10.

---
 arch/arm/boot/dts/socfpga_arria10.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 672e73e35228c..64f30676b285d 100644
@@ -779,7 +779,7 @@
 		timer3: timer3@ffd00100 {
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0xffd01000 0x100>;
+			reg = <0xffd00100 0x100>;
 			clocks = <&l4_sys_free_clk>;
 			clock-names = "timer";
 		};

2.25.1

From: Darrick J. Wong <[email protected]>

[ Upstream commit 125eac243806e021f33a1fdea3687eccbb9f7636 ]

Don't leak kernel memory contents into the shortform attr fork.

---
 fs/xfs/libxfs/xfs_attr_leaf.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index 73a541755d5b7..299d17b088e21 100644
@@ -520,8 +520,8 @@ xfs_attr_shortform_create(xfs_da_args_t *args)
 		ASSERT(ifp->if_flags & XFS_IFINLINE);
 	}
 	xfs_idata_realloc(dp, sizeof(*hdr), XFS_ATTR_FORK);
-	hdr = (xfs_attr_sf_hdr_t *)ifp->if_u1.if_data;
-	hdr->count = 0;
+	hdr = (struct xfs_attr_sf_hdr *)ifp->if_u1.if_data;
+	memset(hdr, 0, sizeof(*hdr));
 	hdr->totsize = cpu_to_be16(sizeof(*hdr));
 	xfs_trans_log_inode(args->trans, dp, XFS_ILOG_CORE | XFS_ILOG_ADATA);
 }

2.25.1

From: Vineet Gupta <[email protected]>

[ Upstream commit 89d29997f103d08264b0685796b420d911658b96 ]

eznps driver is supposed to be platform independent however it ends up including stuff from inside arch/arc headers leading to rand config build errors.

The quick hack to fix this (proper fix is too much chrun for non active user-base) is to add following to nps platform agnostic header.
- copy AUX_IENABLE from arch/arc header
- move CTOP_AUX_IACK from arch/arc/plat-eznps/*/**

---
 arch/arc/plat-eznps/include/plat/ctop.h | 1 -
 include/soc/nps/common.h                | 6 ++++++
 2 files changed, 6 insertions(+), 1 deletion(-)

index 4f6a1673b3a6e..ddfca2c3357a0 100644
@@ -43,7 +43,6 @@
 #define CTOP_AUX_DPC				(CTOP_AUX_BASE + 0x02C)
 #define CTOP_AUX_LPC				(CTOP_AUX_BASE + 0x030)
 #define CTOP_AUX_EFLAGS				(CTOP_AUX_BASE + 0x080)
-#define CTOP_AUX_IACK				(CTOP_AUX_BASE + 0x088)
 #define CTOP_AUX_GPA1				(CTOP_AUX_BASE + 0x08C)
 #define CTOP_AUX_UDMC				(CTOP_AUX_BASE + 0x300)
 

index 9b1d43d671a3f..8c18dc6d3fde5 100644
@@ -45,6 +45,12 @@
 #define CTOP_INST_MOV2B_FLIP_R3_B1_B2_INST	0x5B60
 #define CTOP_INST_MOV2B_FLIP_R3_B1_B2_LIMM	0x00010422
 
+#ifndef AUX_IENABLE
+#define AUX_IENABLE				0x40c
+#endif
+
+#define CTOP_AUX_IACK				(0xFFFFF800 + 0x088)
+
 #ifndef __ASSEMBLY__
 
 /* In order to increase compilation test coverage */

2.25.1

From: Dinghao Liu <[email protected]>

[ Upstream commit e3ddd6067ee62f6e76ebcf61ff08b2c729ae412b ]

When page_address() fails, umem should be freed just like when rxe_mem_alloc() fails.

---
 drivers/infiniband/sw/rxe/rxe_mr.c | 1 +
 1 file changed, 1 insertion(+)

index 5c2684bf430f8..a0d2a2350c7e5 100644
@@ -203,6 +203,7 @@ int rxe_mem_init_user(struct rxe_dev *rxe, struct rxe_pd *pd, u64 start,
 			vaddr = page_address(sg_page(sg));
 			if (!vaddr) {
 				pr_warn("null vaddr\n");
+				ib_umem_release(umem);
 				err = -ENOMEM;
 				goto err1;
 			}

2.25.1

From: Xie He <[email protected]>

[ Upstream commit 91244d108441013b7367b3b4dcc6869998676473 ]

Set the skb's network_header before it is passed to the underlying Ethernet device for transmission.

This patch fixes the following issue:

When we use this driver with AF_PACKET sockets, there would be error messages of:
protocol 0805 is buggy, dev (Ethernet interface name)
printed in the system "dmesg" log.

This is because skbs passed down to the Ethernet device for transmission don't have their network_header properly set, and the dev_queue_xmit_nit function in net/core/dev.c complains about this.

Reason of setting the network_header to this place (at the end of the Ethernet header, and at the beginning of the Ethernet payload):

Because when this driver receives an skb from the Ethernet device, the network_header is also set at this place.

---
 drivers/net/wan/lapbether.c | 2 ++
 1 file changed, 2 insertions(+)

index 6b2553e893aca..15177a54b17d7 100644
@@ -213,6 +213,8 @@ static void lapbeth_data_transmit(struct net_device *ndev, struct sk_buff *skb)
 
 	skb->dev = dev = lapbeth->ethdev;
 
+	skb_reset_network_header(skb);
+
 	dev_hard_header(skb, dev, ETH_P_DEC, bcast_addr, NULL, 0);
 
 	dev_queue_xmit(skb);

2.25.1

From: Evgeniy Didin <[email protected]>

[ Upstream commit 26907eb605fbc3ba9dbf888f21d9d8d04471271d ]

HSDK board has Micrel KSZ9031, recent commit
bcf3440c6dd ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") caused a breakdown of Ethernet.
Using 'phy-mode = "rgmii"' is not correct because accodring RGMII specification it is necessary to have delay on RX (PHY to MAX) which is not generated in case of "rgmii".
Using "rgmii-id" adds necessary delay and solves the issue.

Also adding name of PHY placed on HSDK board.

---
 arch/arc/boot/dts/hsdk.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index aeacea148793c..75aa3a8f9fdc9 100644
@@ -163,7 +163,7 @@
 			reg = <0x8000 0x2000>;
 			interrupts = <10>;
 			interrupt-names = "macirq";
-			phy-mode = "rgmii";
+			phy-mode = "rgmii-id";
 			snps,pbl = <32>;
 			snps,multicast-filter-bins = <256>;
 			clocks = <&gmacclk>;

@@ -179,7 +179,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "snps,dwmac-mdio";
-				phy0: ethernet-phy@0 {
+				phy0: ethernet-phy@0 { /* Micrel KSZ9031 */
 					reg = <0>;
 					ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 					ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;

2.25.1

From: Kamal Heib <[email protected]>

[ Upstream commit 28b0865714b315e318ac45c4fc9156f3d4649646 ]

When the returned speed from __ethtool_get_link_ksettings() is SPEED_UNKNOWN this will lead to reporting a wrong speed and width for providers that uses ib_get_eth_speed(), fix that by defaulting the netdev_speed to SPEED_1000 in case the returned value from __ethtool_get_link_ksettings() is SPEED_UNKNOWN.

---
 drivers/infiniband/core/verbs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index d21c86dd27d86..01f02b3cb835e 100644
@@ -1343,7 +1343,7 @@ int ib_get_eth_speed(struct ib_device *dev, u8 port_num, u8 *speed, u8 *width)
 
 	dev_put(netdev);
 
-	if (!rc) {
+	if (!rc && lksettings.base.speed != (u32)SPEED_UNKNOWN) {
 		netdev_speed = lksettings.base.speed;
 	} else {
 		netdev_speed = SPEED_1000;

2.25.1

From: Xie He <[email protected]>

[ Upstream commit 1a545ebe380bf4c1433e3c136e35a77764fda5ad ]

This driver didn't set hard_header_len. This patch sets hard_header_len for it according to its header_ops->create function.

This driver's header_ops->create function (cisco_hard_header) creates a header of (struct hdlc_header), so hard_header_len should be set to sizeof(struct hdlc_header).

---
 drivers/net/wan/hdlc_cisco.c | 1 +
 1 file changed, 1 insertion(+)

index a408abc25512a..7f99fb666f196 100644
@@ -377,6 +377,7 @@ static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr)
 		memcpy(&state(hdlc)->settings, &new_settings, size);
 		spin_lock_init(&state(hdlc)->lock);
 		dev->header_ops = &cisco_header_ops;
+		dev->hard_header_len = sizeof(struct hdlc_header);
 		dev->type = ARPHRD_CISCO;
 		call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, dev);
 		netif_dormant_on(dev);

2.25.1

From: Mohan Kumar <[email protected]>

[ Upstream commit 216116eae43963c662eb84729507bad95214ca6b ]

The Tegra HDA codec HW implementation has an issue related to not swapping the 2 channel Audio Sample Packet(ASP) channel mapping. Whatever the FL and FR mapping specified the left channel always comes out of left speaker and right channel on right speaker. So add condition to disallow the swapping of FL,FR during the playback.

---
 sound/pci/hda/patch_hdmi.c | 5 +++++
 1 file changed, 5 insertions(+)

index cb7047bf844df..75bdcede04e63 100644
@@ -3399,6 +3399,7 @@ static int tegra_hdmi_build_pcms(struct hda_codec *codec)
 
 static int patch_tegra_hdmi(struct hda_codec *codec)
 {
+	struct hdmi_spec *spec;
 	int err;
 
 	err = patch_generic_hdmi(codec);

@@ -3406,6 +3407,10 @@ static int patch_tegra_hdmi(struct hda_codec *codec)
 		return err;
 
 	codec->patch_ops.build_pcms = tegra_hdmi_build_pcms;
+	spec = codec->spec;
+	spec->chmap.ops.chmap_cea_alloc_validate_get_type =
+		nvhdmi_chmap_cea_alloc_validate_get_type;
+	spec->chmap.ops.chmap_validate = nvhdmi_chmap_validate;
 
 	return 0;
 }

2.25.1

From: Kamal Heib <[email protected]>

[ Upstream commit 6112ef62826e91afbae5446d5d47b38e25f47e3f ]

Both pkey_tbl_len and gid_tbl_len are set in rxe_init_port_param() - so no need to check if they aren't set.

---
 drivers/infiniband/sw/rxe/rxe.c | 3 ---
 1 file changed, 3 deletions(-)

index 8c3d30b3092d4..25267a620e0b5 100644
@@ -170,9 +170,6 @@ static int rxe_init_ports(struct rxe_dev *rxe)
 
 	rxe_init_port_param(port);
 
-	if (!port->attr.pkey_tbl_len || !port->attr.gid_tbl_len)
-		return -EINVAL;
-
 	port->pkey_tbl = kcalloc(port->attr.pkey_tbl_len,
 			sizeof(*port->pkey_tbl), GFP_KERNEL);
 

2.25.1

From: Rander Wang <[email protected]>

[ Upstream commit 13774d81f38538c5fa2924bdcdfa509155480fa6 ]

In snd_hdac_device_init pm_runtime_set_active is called to increase child_count in parent device. But when it is failed to build connection with GPU for one case that integrated graphic gpu is disabled, snd_hdac_ext_bus_device_exit will be invoked to clean up a HD-audio extended codec base device. At this time the child_count of parent is not decreased, which makes parent device can't get suspended.

This patch calls pm_runtime_set_suspended to decrease child_count in parent device in snd_hdac_device_exit to match with snd_hdac_device_init. pm_runtime_set_suspended can make sure that it will not decrease child_count if the device is already suspended.

---
 sound/hda/hdac_device.c | 2 ++
 1 file changed, 2 insertions(+)

index 19deb306facb7..4a843eb7cc940 100644
@@ -123,6 +123,8 @@ EXPORT_SYMBOL_GPL(snd_hdac_device_init);
 void snd_hdac_device_exit(struct hdac_device *codec)
 {
 	pm_runtime_put_noidle(&codec->dev);
+	/* keep balance of runtime PM child_count in parent device */
+	pm_runtime_set_suspended(&codec->dev);
 	snd_hdac_bus_remove_device(codec->bus, codec);
 	kfree(codec->vendor_name);
 	kfree(codec->chip_name);

2.25.1

This is the start of the stable review cycle for the 4.14.199 release. There are 94 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 23 Sep 2020 16:20:12 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.199-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.14.199-rc1

Adam Borowski <[email protected]>
x86/defconfig: Enable CONFIG_USB_XHCI_HCD=y

Alexey Kardashevskiy <[email protected]>
powerpc/dma: Fix dma_map_ops::get_required_mask

Quentin Perret <[email protected]>
ehci-hcd: Move include to keep CRC stable

Tobias Diedrich <[email protected]>

    serial: 8250_pci: Add Realtek 816a and 816b

Hans de Goede <[email protected]>
Input: i8042 - add Entroware Proteus EL07R4 to nomux and reset lists

Vincent Huang <[email protected]>
Input: trackpoint - add new trackpoint variant IDs

Sunghyun Jin <[email protected]>
percpu: fix first chunk size calculation for populated bitmap

Volker Rümelin <[email protected]>
i2c: i801: Fix resume bug

Oliver Neukum <[email protected]>
usblp: fix race between disconnect() and read()

Oliver Neukum <[email protected]>
USB: UAS: fix disconnect by unplugging a hub

Penghao <[email protected]>
USB: quirks: Add USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for BYD zhaoxin notebook

Yu Kuai <[email protected]>
drm/mediatek: Add missing put_device() call in mtk_hdmi_dt_parse_pdata()

Yu Kuai <[email protected]>
drm/mediatek: Add exception handing in mtk_drm_probe() if component init fail

Thomas Bogendoerfer <[email protected]>
MIPS: SNI: Fix spurious interrupts

Tetsuo Handa <[email protected]>
fbcon: Fix user font detection test at fbcon_resize().

Namhyung Kim <[email protected]>
perf test: Free formats for perf pmu parse test

Thomas Bogendoerfer <[email protected]>
MIPS: SNI: Fix MIPS_L1_CACHE_SHIFT

Michael Kelley <[email protected]>
Drivers: hv: vmbus: Add timeout to vmbus_wait_for_unload

Nathan Chancellor <[email protected]>
clk: rockchip: Fix initialization of mux_pll_src_4plls_p

Huacai Chen <[email protected]>
KVM: MIPS: Change the definition of kvm type

Gustav Wiklander <[email protected]>
spi: Fix memory leak on splited transfers

Evan Nimmo <[email protected]>
i2c: algo: pca: Reapply i2c bus settings after reset

Sahitya Tummala <[email protected]>
f2fs: fix indefinite loop scanning for free nid

David Milburn <[email protected]>
nvme-fc: cancel async events before freeing event struct

Laurent Pinchart <[email protected]>
rapidio: Replace 'select' DMAENGINES 'with depends on'

J. Bruce Fields <[email protected]>
SUNRPC: stop printk reading past end of string

Vincent Whitchurch <[email protected]>
spi: spi-loopback-test: Fix out-of-bounds read

James Smart <[email protected]>
scsi: lpfc: Fix FLOGI/PLOGI receive race condition in pt2pt discovery

Javed Hasan <[email protected]>
scsi: libfc: Fix for double free()

Dinghao Liu <[email protected]>
scsi: pm8001: Fix memleak in pm8001_exec_internal_task_abort

Olga Kornievskaia <[email protected]>
NFSv4.1 handle ERR_DELAY error reclaiming locking state on delegation recall

Haiyang Zhang <[email protected]>
hv_netvsc: Remove "unlikely" from netvsc_select_queue

Miaohe Lin <[email protected]>
net: handle the return value of pskb_carve_frag_list() correctly

Bob Peterson <[email protected]>
gfs2: initialize transaction tr_ailX_lists earlier

Peter Oberparleiter <[email protected]>
gcov: add support for GCC 10.1

Heikki Krogerus <[email protected]>
usb: typec: ucsi: acpi: Check the _DEP dependencies

Mathias Nyman <[email protected]>
usb: Fix out of sync data toggle if a configured device is reconfigured

Aleksander Morgado <[email protected]>
USB: serial: option: add support for SIM7070/SIM7080/SIM7090 modules

Bjørn Mork <[email protected]>
USB: serial: option: support dynamic Quectel USB compositions

Patrick Riphagen <[email protected]>
USB: serial: ftdi_sio: add IDs for Xsens Mti USB converter

Zeng Tao <[email protected]>
usb: core: fix slab-out-of-bounds Read in read_descriptors

Vaibhav Agarwal <[email protected]>
staging: greybus: audio: fix uninitialized value issue

Tetsuo Handa <[email protected]>
video: fbdev: fix OOB read in vga_8planes_imageblit()

Chris Healy <[email protected]>
ARM: dts: vfxxx: Add syscon compatible with OCOTP

Wanpeng Li <[email protected]>
KVM: VMX: Don't freeze guest when event delivery causes an APIC-access exit

Linus Torvalds <[email protected]>
vgacon: remove software scrollback support

Linus Torvalds <[email protected]>
fbcon: remove now unusued 'softback_lines' cursor() argument

Linus Torvalds <[email protected]>
fbcon: remove soft scrollback code

Yi Zhang <[email protected]>
RDMA/rxe: Fix the parent sysfs read when the interface has 15 chars

Ilya Dryomov <[email protected]>
rbd: require global CAP_SYS_ADMIN for mapping and unmapping

Hou Pu <[email protected]>

    scsi: target: iscsi: Fix hang in iscsit_access_np() when getting tpg->np_login_sem

Varun Prakash <[email protected]>
scsi: target: iscsi: Fix data digest calculation

Michał Mirosław <[email protected]>
regulator: push allocation in set_consumer_device_supply() out of lock

Filipe Manana <[email protected]>
btrfs: fix wrong address when faulting in pages in the search ioctl

Josef Bacik <[email protected]>
btrfs: fix lockdep splat in add_missing_dev

Qu Wenruo <[email protected]>
btrfs: require only sector size alignment for parent eb bytenr

Rustam Kovhaev <[email protected]>
staging: wlan-ng: fix out of bounds read in prism2sta_probe_usb()

Jonathan Cameron <[email protected]>
iio:accel:mma8452: Fix timestamp alignment and prevent data leak.

Jonathan Cameron <[email protected]>
iio:accel:mma7455: Fix timestamp alignment and prevent data leak.

Jonathan Cameron <[email protected]>
iio: accel: kxsd9: Fix alignment of local buffer.

Jonathan Cameron <[email protected]>
iio:chemical:ccs811: Fix timestamp alignment and prevent data leak.

Jonathan Cameron <[email protected]>
iio:light:max44000 Fix timestamp alignment and prevent data leak.

Jonathan Cameron <[email protected]>
iio:magnetometer:ak8975 Fix alignment and data leak issues.

Jonathan Cameron <[email protected]>
iio:adc:ti-adc081c Fix alignment and data leak issues

Jonathan Cameron <[email protected]>
iio:adc:max1118 Fix alignment of timestamp and data leak issues

Jonathan Cameron <[email protected]>
iio:adc:ina2xx Fix timestamp alignment issue.

Jonathan Cameron <[email protected]>
iio:adc:ti-adc084s021 Fix alignment and data leak issues.

Jonathan Cameron <[email protected]>
iio:accel:bmc150-accel: Fix timestamp alignment and prevent data leak.

Jonathan Cameron <[email protected]>
iio:light:ltr501 Fix timestamp alignment issue.

Maxim Kochetkov <[email protected]>
iio: adc: ti-ads1015: fix conversion when CONFIG_PM is not set

Angelo Compagnucci <[email protected]>
iio: adc: mcp3422: fix locking on error path

Angelo Compagnucci <[email protected]>
iio: adc: mcp3422: fix locking scope

Leon Romanovsky <[email protected]>
gcov: Disable gcov build with GCC 10

Rander Wang <[email protected]>
ALSA: hda: fix a runtime pm issue in SOF when integrated GPU is disabled

Rafael J. Wysocki <[email protected]>
cpufreq: intel_pstate: Refuse to turn off with HWP enabled

Evgeniy Didin <[email protected]>
ARC: [plat-hsdk]: Switch ethernet phy-mode to rgmii-id

Xie He <[email protected]>
drivers/net/wan/hdlc_cisco: Add hard_header_len

Vineet Gupta <[email protected]>
irqchip/eznps: Fix build error for !ARC700 builds

Darrick J. Wong <[email protected]>
xfs: initialize the shortform attr header padding entry

Xie He <[email protected]>
drivers/net/wan/lapbether: Set network_header before transmitting

Mohan Kumar <[email protected]>
ALSA: hda: Fix 2 channel swapping for Tegra

Dinghao Liu <[email protected]>
firestream: Fix memleak in fs_open

Dinghao Liu <[email protected]>
NFC: st95hf: Fix memleak in st95hf_in_send_cmd

Xie He <[email protected]>
drivers/net/wan/lapbether: Added needed_tailroom

Hanjun Guo <[email protected]>
dmaengine: acpi: Put the CSRT table after using it

Vineet Gupta <[email protected]>
ARC: HSDK: wireup perf irq

Florian Fainelli <[email protected]>
arm64: dts: ns2: Fixed QSPI compatible string

Florian Fainelli <[email protected]>
ARM: dts: BCM5301X: Fixed QSPI compatible string

Douglas Anderson <[email protected]>
mmc: sdhci-msm: Add retries when all tuning phases are found valid

Kamal Heib <[email protected]>
RDMA/core: Fix reported speed and width

Luo Jiaxing <[email protected]>
scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA

Kamal Heib <[email protected]>
RDMA/rxe: Drop pointless checks in rxe_init_ports

Dinghao Liu <[email protected]>
RDMA/rxe: Fix memleak in rxe_mem_init_user

Dinh Nguyen <[email protected]>
ARM: dts: socfpga: fix register entry for timer3 on Arria10

-------------

Diffstat:

 Makefile                                         |   4 +-
 arch/arc/boot/dts/hsdk.dts                       |   6 +-
 arch/arc/plat-eznps/include/plat/ctop.h          |   1 -
 arch/arm/boot/dts/bcm5301x.dtsi                  |   2 +-
 arch/arm/boot/dts/socfpga_arria10.dtsi           |   2 +-
 arch/arm/boot/dts/vfxxx.dtsi                     |   2 +-
 arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi |   2 +-
 arch/mips/Kconfig                                |   1 +
 arch/mips/kvm/mips.c                             |   2 +
 arch/mips/sni/a20r.c                             |   9 +-
 arch/powerpc/configs/pasemi_defconfig            |   1 -
 arch/powerpc/configs/ppc6xx_defconfig            |   1 -
 arch/powerpc/kernel/dma-iommu.c                  |   3 +-
 arch/x86/configs/i386_defconfig                  |   2 +-
 arch/x86/configs/x86_64_defconfig                |   2 +-
 arch/x86/kvm/vmx.c                               |   1 +
 drivers/atm/firestream.c                         |   1 +
 drivers/block/rbd.c                              |  12 +
 drivers/clk/rockchip/clk-rk3228.c                |   2 +-
 drivers/cpufreq/intel_pstate.c                   |  12 +-
 drivers/dma/acpi-dma.c                           |   4 +-
 drivers/gpu/drm/mediatek/mtk_drm_drv.c           |   7 +-
 drivers/gpu/drm/mediatek/mtk_hdmi.c              |  26 +-
 drivers/hv/channel_mgmt.c                        |   7 +-
 drivers/i2c/algos/i2c-algo-pca.c                 |  35 ++-
 drivers/i2c/busses/i2c-i801.c                    |  21 +-
 drivers/iio/accel/bmc150-accel-core.c            |  15 +-
 drivers/iio/accel/kxsd9.c                        |  16 +-
 drivers/iio/accel/mma7455_core.c                 |  16 +-
 drivers/iio/accel/mma8452.c                      |  11 +-
 drivers/iio/adc/ina2xx-adc.c                     |  11 +-
 drivers/iio/adc/max1118.c                        |  10 +-
 drivers/iio/adc/mcp3422.c                        |  16 +-
 drivers/iio/adc/ti-adc081c.c                     |  11 +-
 drivers/iio/adc/ti-adc084s021.c                  |  10 +-
 drivers/iio/adc/ti-ads1015.c                     |  10 +
 drivers/iio/chemical/ccs811.c                    |  13 +-
 drivers/iio/light/ltr501.c                       |  15 +-
 drivers/iio/light/max44000.c                     |  12 +-
 drivers/iio/magnetometer/ak8975.c                |  16 +-
 drivers/infiniband/core/verbs.c                  |   2 +-
 drivers/infiniband/sw/rxe/rxe.c                  |   3 -
 drivers/infiniband/sw/rxe/rxe_mr.c               |   1 +
 drivers/infiniband/sw/rxe/rxe_verbs.c            |   2 +-
 drivers/input/mouse/trackpoint.c                 |  10 +-
 drivers/input/mouse/trackpoint.h                 |  10 +-
 drivers/input/serio/i8042-x86ia64io.h            |  16 ++
 drivers/mmc/host/sdhci-msm.c                     |  18 +-
 drivers/net/hyperv/netvsc_drv.c                  |   2 +-
 drivers/net/wan/hdlc_cisco.c                     |   1 +
 drivers/net/wan/lapbether.c                      |   3 +
 drivers/nfc/st95hf/core.c                        |   2 +-
 drivers/nvme/host/fc.c                           |   1 +
 drivers/rapidio/Kconfig                          |   2 +-
 drivers/regulator/core.c                         |  46 ++--
 drivers/scsi/libfc/fc_disc.c                     |   2 -
 drivers/scsi/libsas/sas_ata.c                    |   5 +-
 drivers/scsi/lpfc/lpfc_els.c                     |   4 +-
 drivers/scsi/pm8001/pm8001_sas.c                 |   2 +-
 drivers/spi/spi-loopback-test.c                  |   2 +-
 drivers/spi/spi.c                                |   9 +-
 drivers/staging/greybus/audio_topology.c         |  29 +-
 drivers/staging/wlan-ng/hfa384x_usb.c            |   5 -
 drivers/staging/wlan-ng/prism2usb.c              |  19 +-
 drivers/target/iscsi/iscsi_target.c              |  17 +-
 drivers/target/iscsi/iscsi_target_login.c        |   6 +-
 drivers/target/iscsi/iscsi_target_login.h        |   3 +-
 drivers/target/iscsi/iscsi_target_nego.c         |   3 +-
 drivers/tty/serial/8250/8250_pci.c               |  11 +
 drivers/usb/class/usblp.c                        |   5 +
 drivers/usb/core/message.c                       |  91 +++---
 drivers/usb/core/quirks.c                        |   4 +
 drivers/usb/core/sysfs.c                         |   5 +
 drivers/usb/host/ehci-hcd.c                      |   1 +
 drivers/usb/host/ehci-hub.c                      |   1 -
 drivers/usb/serial/ftdi_sio.c                    |   1 +
 drivers/usb/serial/ftdi_sio_ids.h                |   1 +
 drivers/usb/serial/option.c                      |  22 +-
 drivers/usb/storage/uas.c                        |  14 +-
 drivers/usb/typec/ucsi/ucsi_acpi.c               |   4 +
 drivers/video/console/Kconfig                    |  46 ----
 drivers/video/console/vgacon.c                   | 220 +--------------
 drivers/video/fbdev/core/bitblit.c               |  11 +-
 drivers/video/fbdev/core/fbcon.c                 | 336 +----------------------
 drivers/video/fbdev/core/fbcon.h                 |   2 +-
 drivers/video/fbdev/core/fbcon_ccw.c             |  11 +-
 drivers/video/fbdev/core/fbcon_cw.c              |  11 +-
 drivers/video/fbdev/core/fbcon_ud.c              |  11 +-
 drivers/video/fbdev/core/tileblit.c              |   2 +-
 drivers/video/fbdev/vga16fb.c                    |   2 +-
 fs/btrfs/extent-tree.c                           |  19 +-
 fs/btrfs/ioctl.c                                 |   3 +-
 fs/btrfs/print-tree.c                            |  12 +-
 fs/btrfs/volumes.c                               |  10 +
 fs/f2fs/node.c                                   |   3 +
 fs/gfs2/glops.c                                  |   2 +
 fs/gfs2/log.c                                    |   2 -
 fs/gfs2/trans.c                                  |   2 +
 fs/nfs/nfs4proc.c                                |   7 +-
 fs/xfs/libxfs/xfs_attr_leaf.c                    |   4 +-
 include/linux/i2c-algo-pca.h                     |  15 +
 include/soc/nps/common.h                         |   6 +
 include/uapi/linux/kvm.h                         |   5 +-
 kernel/gcov/gcc_4_7.c                            |   4 +-
 mm/percpu.c                                      |   2 +-
 net/core/skbuff.c                                |  10 +-
 net/sunrpc/rpcb_clnt.c                           |   4 +-
 sound/hda/hdac_device.c                          |   2 +
 sound/pci/hda/patch_hdmi.c                       |   5 +
 tools/perf/tests/pmu.c                           |   1 +
 tools/perf/util/pmu.c                            |  11 +
 tools/perf/util/pmu.h                            |   1 +
 112 files changed, 598 insertions(+), 919 deletions(-)

From: Jonathan Cameron <[email protected]>

commit db8f06d97ec284dc018e2e4890d2e5035fde8630 upstream.

One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data.

This data is allocated with kzalloc so no data can leak apart from previous readings.

The explicit alignment of ts is necessary to ensure correct padding on architectures where s64 is only 4 bytes aligned such as x86_32.

---
 drivers/iio/adc/max1118.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

@@ -38,6 +38,11 @@ struct max1118 {
 	struct spi_device *spi;
 	struct mutex lock;
 	struct regulator *reg;
+	/* Ensure natural alignment of buffer elements */
+	struct {
+		u8 channels[2];
+		s64 ts __aligned(8);
+	} scan;
 
 	u8 data ____cacheline_aligned;
 };

@@ -163,7 +168,6 @@ static irqreturn_t max1118_trigger_handl
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct max1118 *adc = iio_priv(indio_dev);
-	u8 data[16] = { }; /* 2x 8-bit ADC data + padding + 8 bytes timestamp */
 	int scan_index;
 	int i = 0;
 

@@ -181,10 +185,10 @@ static irqreturn_t max1118_trigger_handl
 			goto out;
 		}
 
-		data[i] = ret;
+		adc->scan.channels[i] = ret;
 		i++;
 	}
-	iio_push_to_buffers_with_timestamp(indio_dev, data,
+	iio_push_to_buffers_with_timestamp(indio_dev, &adc->scan,
 					   iio_get_time_ns(indio_dev));
 out:
 	mutex_unlock(&adc->lock);

From: Jonathan Cameron <[email protected]>

commit 54f82df2ba86e2a8e9cbf4036d192366e3905c89 upstream.

One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv().

This data is allocated with kzalloc so no data can leak apart from previous readings.

The eplicit alignment of ts is necessary to ensure correct padding on x86_32 where s64 is only aligned to 4 bytes.

---
 drivers/iio/adc/ti-adc081c.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

@@ -36,6 +36,12 @@ struct adc081c {
 
 	/* 8, 10 or 12 */
 	int bits;
+
+	/* Ensure natural alignment of buffer elements */
+	struct {
+		u16 channel;
+		s64 ts __aligned(8);
+	} scan;
 };
 
 #define REG_CONV_RES 0x00

@@ -132,14 +138,13 @@ static irqreturn_t adc081c_trigger_handl
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct adc081c *data = iio_priv(indio_dev);
-	u16 buf[8]; /* 2 bytes data + 6 bytes padding + 8 bytes timestamp */
 	int ret;
 
 	ret = i2c_smbus_read_word_swapped(data->i2c, REG_CONV_RES);
 	if (ret < 0)
 		goto out;
-	buf[0] = ret;
-	iio_push_to_buffers_with_timestamp(indio_dev, buf,
+	data->scan.channel = ret;
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
 					   iio_get_time_ns(indio_dev));
 out:
 	iio_trigger_notify_done(indio_dev->trig);

From: Vineet Gupta <[email protected]>

[ Upstream commit fe81d927b78c4f0557836661d32e41ebc957b024 ]

Newer version of HSDK aka HSDK-4xD (with dual issue HS48x4 CPU) wired up the perf interrupt, so enable that in DT.
This is OK for old HSDK where this irq is ignored because pct irq is not wired up in hardware.

---
 arch/arc/boot/dts/hsdk.dts | 2 ++
 1 file changed, 2 insertions(+)

index 57d81c6aa379d..aeacea148793c 100644
@@ -79,6 +79,8 @@
 
 	arcpct: pct {
 		compatible = "snps,archs-pct";
+		interrupt-parent = <&cpu_intc>;
+		interrupts = <20>;
 	};
 
 	/* TIMER0 with interrupt for clockevent */

2.25.1

From: Jonathan Cameron <[email protected]>

commit 7e5ac1f2206eda414f90c698fe1820dee873394d upstream.

One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 16 byte u8 array on the stack As Lars also noted
this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment ensured by use of an explicit c structure. This data is allocated with kzalloc so no data can leak appart from previous readings.

The force alignment of ts is not strictly necessary in this particularly case but does make the code less fragile.

---
 drivers/iio/accel/mma7455_core.c |   16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

@@ -55,6 +55,14 @@
 
 struct mma7455_data {
 	struct regmap *regmap;
+	/*
+	 * Used to reorganize data.  Will ensure correct alignment of
+	 * the timestamp if present
+	 */
+	struct {
+		__le16 channels[3];
+		s64 ts __aligned(8);
+	} scan;
 };
 
 static int mma7455_drdy(struct mma7455_data *mma7455)

@@ -85,19 +93,19 @@ static irqreturn_t mma7455_trigger_handl
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct mma7455_data *mma7455 = iio_priv(indio_dev);
-	u8 buf[16]; /* 3 x 16-bit channels + padding + ts */
 	int ret;
 
 	ret = mma7455_drdy(mma7455);
 	if (ret)
 		goto done;
 
-	ret = regmap_bulk_read(mma7455->regmap, MMA7455_REG_XOUTL, buf,
-			       sizeof(__le16) * 3);
+	ret = regmap_bulk_read(mma7455->regmap, MMA7455_REG_XOUTL,
+			       mma7455->scan.channels,
+			       sizeof(mma7455->scan.channels));
 	if (ret)
 		goto done;
 
-	iio_push_to_buffers_with_timestamp(indio_dev, buf,
+	iio_push_to_buffers_with_timestamp(indio_dev, &mma7455->scan,
 					   iio_get_time_ns(indio_dev));
 
 done:

From: Jonathan Cameron <[email protected]>

commit 95ad67577de4ea08eb8e441394e698aa4addcc0b upstream.

iio_push_to_buffers_with_timestamp assumes 8 byte alignment which is not guaranteed by an array of smaller elements.

Note that whilst in this particular case the alignment forcing of the ts element is not strictly necessary it acts as good documentation. Doing this where not necessary should cut down on the number of cut and paste introduced errors elsewhere.

---
 drivers/iio/accel/kxsd9.c |   16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

@@ -212,14 +212,20 @@ static irqreturn_t kxsd9_trigger_handler
 	const struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct kxsd9_state *st = iio_priv(indio_dev);
+	/*
+	 * Ensure correct positioning and alignment of timestamp.
+	 * No need to zero initialize as all elements written.
+	 */
+	struct {
+		__be16 chan[4];
+		s64 ts __aligned(8);
+	} hw_values;
 	int ret;
-	/* 4 * 16bit values AND timestamp */
-	__be16 hw_values[8];
 
 	ret = regmap_bulk_read(st->map,
 			       KXSD9_REG_X,
-			       &hw_values,
-			       8);
+			       hw_values.chan,
+			       sizeof(hw_values.chan));
 	if (ret) {
 		dev_err(st->dev,
 			"error reading data\n");

@@ -227,7 +233,7 @@ static irqreturn_t kxsd9_trigger_handler
 	}
 
 	iio_push_to_buffers_with_timestamp(indio_dev,
-					   hw_values,
+					   &hw_values,
 					   iio_get_time_ns(indio_dev));
 	iio_trigger_notify_done(indio_dev->trig);
 

From: Filipe Manana <[email protected]>

commit 1c78544eaa4660096aeb6a57ec82b42cdb3bfe5a upstream.

When faulting in the pages for the user supplied buffer for the search ioctl, we are passing only the base address of the buffer to the function fault_in_pages_writeable(). This means that after the first iteration of the while loop that searches for leaves, when we have a non-zero offset, stored in 'sk_offset', we try to fault in a wrong page range.

So fix this by adding the offset in 'sk_offset' to the base address of the user supplied buffer when calling fault_in_pages_writeable().

Several users have reported that the applications compsize and bees have started to operate incorrectly since commit a48b73eca4ceb9 ("btrfs: fix potential deadlock in the search ioctl") was added to stable trees, and these applications make heavy use of the search ioctls. This fixes their issues.

---
 fs/btrfs/ioctl.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -2131,7 +2131,8 @@ static noinline int search_ioctl(struct
 	key.offset = sk->min_offset;
 
 	while (1) {
-		ret = fault_in_pages_writeable(ubuf, *buf_size - sk_offset);
+		ret = fault_in_pages_writeable(ubuf + sk_offset,
+					       *buf_size - sk_offset);
 		if (ret)
 			break;
 

From: Jonathan Cameron <[email protected]>

commit eb1a148ef41d8ae8d9201efc3f1b145976290331 upstream.

One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment explicitly requested. This data is allocated with kzalloc so no data can leak appart from previous readings.

The explicit alignment of ts is necessary to ensure consistent padding for x86_32 in which the ts would otherwise be 4 byte aligned.

---
 drivers/iio/chemical/ccs811.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

@@ -73,6 +73,11 @@ struct ccs811_data {
 	struct i2c_client *client;
 	struct mutex lock; /* Protect readings */
 	struct ccs811_reading buffer;
+	/* Ensures correct alignment of timestamp if present */
+	struct {
+		s16 channels[2];
+		s64 ts __aligned(8);
+	} scan;
 };
 
 static const struct iio_chan_spec ccs811_channels[] = {

@@ -275,17 +280,17 @@ static irqreturn_t ccs811_trigger_handle
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct ccs811_data *data = iio_priv(indio_dev);
 	struct i2c_client *client = data->client;
-	s16 buf[8]; /* s16 eCO2 + s16 TVOC + padding + 8 byte timestamp */
 	int ret;
 
-	ret = i2c_smbus_read_i2c_block_data(client, CCS811_ALG_RESULT_DATA, 4,
-					    (u8 *)&buf);
+	ret = i2c_smbus_read_i2c_block_data(client, CCS811_ALG_RESULT_DATA,
+					    sizeof(data->scan.channels),
+					    (u8 *)data->scan.channels);
 	if (ret != 4) {
 		dev_err(&client->dev, "cannot read sensor data\n");
 		goto err;
 	}
 
-	iio_push_to_buffers_with_timestamp(indio_dev, buf,
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
 					   iio_get_time_ns(indio_dev));
 
 err:

From: Josef Bacik <[email protected]>

commit fccc0007b8dc952c6bc0805cdf842eb8ea06a639 upstream.

Nikolay reported a lockdep splat in generic/476 that I could reproduce with btrfs/187.

======================================================
WARNING: possible circular locking dependency detected
5.9.0-rc2+ #1 Tainted: G W
------------------------------------------------------
kswapd0/100 is trying to acquire lock:
ffff9e8ef38b6268 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node.part.0+0x3f/0x330

but task is already holding lock:
ffffffffa9d74700 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (fs_reclaim){+.+.}-{0:0}:

	 fs_reclaim_acquire+0x65/0x80
	 slab_pre_alloc_hook.constprop.0+0x20/0x200
	 kmem_cache_alloc_trace+0x3a/0x1a0
	 btrfs_alloc_device+0x43/0x210
	 add_missing_dev+0x20/0x90
	 read_one_chunk+0x301/0x430
	 btrfs_read_sys_array+0x17b/0x1b0
	 open_ctree+0xa62/0x1896
	 btrfs_mount_root.cold+0x12/0xea
	 legacy_get_tree+0x30/0x50
	 vfs_get_tree+0x28/0xc0
	 vfs_kern_mount.part.0+0x71/0xb0
	 btrfs_mount+0x10d/0x379
	 legacy_get_tree+0x30/0x50
	 vfs_get_tree+0x28/0xc0
	 path_mount+0x434/0xc00
	 __x64_sys_mount+0xe3/0x120
	 do_syscall_64+0x33/0x40
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

-> #1 (&fs_info->chunk_mutex){+.+.}-{3:3}:

	 __mutex_lock+0x7e/0x7e0
	 btrfs_chunk_alloc+0x125/0x3a0
	 find_free_extent+0xdf6/0x1210
	 btrfs_reserve_extent+0xb3/0x1b0
	 btrfs_alloc_tree_block+0xb0/0x310
	 alloc_tree_block_no_bg_flush+0x4a/0x60
	 __btrfs_cow_block+0x11a/0x530
	 btrfs_cow_block+0x104/0x220
	 btrfs_search_slot+0x52e/0x9d0
	 btrfs_lookup_inode+0x2a/0x8f
	 __btrfs_update_delayed_inode+0x80/0x240
	 btrfs_commit_inode_delayed_inode+0x119/0x120
	 btrfs_evict_inode+0x357/0x500
	 evict+0xcf/0x1f0
	 vfs_rmdir.part.0+0x149/0x160
	 do_rmdir+0x136/0x1a0
	 do_syscall_64+0x33/0x40
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

-> #0 (&delayed_node->mutex){+.+.}-{3:3}:

	 __lock_acquire+0x1184/0x1fa0
	 lock_acquire+0xa4/0x3d0
	 __mutex_lock+0x7e/0x7e0
	 __btrfs_release_delayed_node.part.0+0x3f/0x330
	 btrfs_evict_inode+0x24c/0x500
	 evict+0xcf/0x1f0
	 dispose_list+0x48/0x70
	 prune_icache_sb+0x44/0x50
	 super_cache_scan+0x161/0x1e0
	 do_shrink_slab+0x178/0x3c0
	 shrink_slab+0x17c/0x290
	 shrink_node+0x2b2/0x6d0
	 balance_pgdat+0x30a/0x670
	 kswapd+0x213/0x4c0
	 kthread+0x138/0x160
	 ret_from_fork+0x1f/0x30

other info that might help us debug this:

  Chain exists of:
    &delayed_node->mutex --> &fs_info->chunk_mutex --> fs_reclaim

   Possible unsafe locking scenario:

	 CPU0                    CPU1
	 ----                    ----
    lock(fs_reclaim);
				 lock(&fs_info->chunk_mutex);
				 lock(fs_reclaim);
    lock(&delayed_node->mutex);

*** DEADLOCK ***

3 locks held by kswapd0/100:
#0: ffffffffa9d74700 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30 #1: ffffffffa9d65c50 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x115/0x290 #2: ffff9e8e9da260e0 (&type->s_umount_key#48){++++}-{3:3}, at: super_cache_scan+0x38/0x1e0

  stack backtrace:
  CPU: 1 PID: 100 Comm: kswapd0 Tainted: G        W         5.9.0-rc2+ #1
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
  Call Trace:
   dump_stack+0x92/0xc8
   check_noncircular+0x12d/0x150
   __lock_acquire+0x1184/0x1fa0
   lock_acquire+0xa4/0x3d0
   ? __btrfs_release_delayed_node.part.0+0x3f/0x330
   __mutex_lock+0x7e/0x7e0
   ? __btrfs_release_delayed_node.part.0+0x3f/0x330
   ? __btrfs_release_delayed_node.part.0+0x3f/0x330
   ? lock_acquire+0xa4/0x3d0
   ? btrfs_evict_inode+0x11e/0x500
   ? find_held_lock+0x2b/0x80
   __btrfs_release_delayed_node.part.0+0x3f/0x330
   btrfs_evict_inode+0x24c/0x500
   evict+0xcf/0x1f0
   dispose_list+0x48/0x70
   prune_icache_sb+0x44/0x50
   super_cache_scan+0x161/0x1e0
   do_shrink_slab+0x178/0x3c0
   shrink_slab+0x17c/0x290
   shrink_node+0x2b2/0x6d0
   balance_pgdat+0x30a/0x670
   kswapd+0x213/0x4c0
   ? _raw_spin_unlock_irqrestore+0x46/0x60
   ? add_wait_queue_exclusive+0x70/0x70
   ? balance_pgdat+0x670/0x670
   kthread+0x138/0x160
   ? kthread_create_worker_on_cpu+0x40/0x40
   ret_from_fork+0x1f/0x30

This is because we are holding the chunk_mutex when we call btrfs_alloc_device, which does a GFP_KERNEL allocation. We don't want to switch that to a GFP_NOFS lock because this is the only place where it matters. So instead use memalloc_nofs_save() around the allocation in order to avoid the lockdep splat.

---
 fs/btrfs/volumes.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

@@ -16,6 +16,7 @@
  * Boston, MA 021110-1307, USA.
  */
 #include <linux/sched.h>
+#include <linux/sched/mm.h>
 #include <linux/bio.h>
 #include <linux/slab.h>
 #include <linux/buffer_head.h>

@@ -6278,8 +6279,17 @@ static struct btrfs_device *add_missing_
 					    u64 devid, u8 *dev_uuid)
 {
 	struct btrfs_device *device;
+	unsigned int nofs_flag;
 
+	/*
+	 * We call this under the chunk_mutex, so we want to use NOFS for this
+	 * allocation, however we don't want to change btrfs_alloc_device() to
+	 * always do NOFS because we use it in a lot of other GFP_KERNEL safe
+	 * places.
+	 */
+	nofs_flag = memalloc_nofs_save();
 	device = btrfs_alloc_device(NULL, &devid, dev_uuid);
+	memalloc_nofs_restore(nofs_flag);
 	if (IS_ERR(device))
 		return NULL;
 

From: Michał Mirosław <[email protected]>

commit 5c06540165d443c6455123eb48e7f1a9b618ab34 upstream.

Pull regulator_list_mutex into set_consumer_device_supply() and keep allocations outside of it. Fourth of the fs_reclaim deadlock case.

---
 drivers/regulator/core.c |   46 ++++++++++++++++++++++++++--------------------
 1 file changed, 26 insertions(+), 20 deletions(-)

@@ -1192,7 +1192,7 @@ static int set_consumer_device_supply(st
 				      const char *consumer_dev_name,
 				      const char *supply)
 {
-	struct regulator_map *node;
+	struct regulator_map *node, *new_node;
 	int has_dev;
 
 	if (supply == NULL)

@@ -1203,6 +1203,22 @@ static int set_consumer_device_supply(st
 	else
 		has_dev = 0;
 
+	new_node = kzalloc(sizeof(struct regulator_map), GFP_KERNEL);
+	if (new_node == NULL)
+		return -ENOMEM;
+
+	new_node->regulator = rdev;
+	new_node->supply = supply;
+
+	if (has_dev) {
+		new_node->dev_name = kstrdup(consumer_dev_name, GFP_KERNEL);
+		if (new_node->dev_name == NULL) {
+			kfree(new_node);
+			return -ENOMEM;
+		}
+	}
+
+	mutex_lock(&regulator_list_mutex);
 	list_for_each_entry(node, &regulator_map_list, list) {
 		if (node->dev_name && consumer_dev_name) {
 			if (strcmp(node->dev_name, consumer_dev_name) != 0)

@@ -1220,26 +1236,19 @@ static int set_consumer_device_supply(st
 			 node->regulator->desc->name,
 			 supply,
 			 dev_name(&rdev->dev), rdev_get_name(rdev));
-		return -EBUSY;
+		goto fail;
 	}
 
-	node = kzalloc(sizeof(struct regulator_map), GFP_KERNEL);
-	if (node == NULL)
-		return -ENOMEM;
-
-	node->regulator = rdev;
-	node->supply = supply;
-
-	if (has_dev) {
-		node->dev_name = kstrdup(consumer_dev_name, GFP_KERNEL);
-		if (node->dev_name == NULL) {
-			kfree(node);
-			return -ENOMEM;
-		}
-	}
+	list_add(&new_node->list, &regulator_map_list);
+	mutex_unlock(&regulator_list_mutex);
 
-	list_add(&node->list, &regulator_map_list);
 	return 0;
+
+fail:
+	mutex_unlock(&regulator_list_mutex);
+	kfree(new_node->dev_name);
+	kfree(new_node);
+	return -EBUSY;
 }
 
 static void unset_regulator_supplies(struct regulator_dev *rdev)

@@ -4095,19 +4104,16 @@ regulator_register(const struct regulato
 
 	/* add consumers devices */
 	if (init_data) {
-		mutex_lock(&regulator_list_mutex);
 		for (i = 0; i < init_data->num_consumer_supplies; i++) {
 			ret = set_consumer_device_supply(rdev,
 				init_data->consumer_supplies[i].dev_name,
 				init_data->consumer_supplies[i].supply);
 			if (ret < 0) {
-				mutex_unlock(&regulator_list_mutex);
 				dev_err(dev, "Failed to set supply %s\n",
 					init_data->consumer_supplies[i].supply);
 				goto unset_supplies;
 			}
 		}
-		mutex_unlock(&regulator_list_mutex);
 	}
 
 	if (!rdev->desc->ops->get_voltage &&

From: Leon Romanovsky <[email protected]>

[ Upstream commit cfc905f158eaa099d6258031614d11869e7ef71c ]

GCOV built with GCC 10 doesn't initialize n_function variable. This produces different kernel panics as was seen by Colin in Ubuntu and me in FC 32.

As a workaround, let's disable GCOV build for broken GCC 10 version.

---
 kernel/gcov/Kconfig | 1 +
 1 file changed, 1 insertion(+)

index 1276aabaab550..1d78ed19a3512 100644
@@ -3,6 +3,7 @@ menu "GCOV-based kernel profiling"
 config GCOV_KERNEL
 	bool "Enable gcov-based kernel profiling"
 	depends on DEBUG_FS
+	depends on !CC_IS_GCC || GCC_VERSION < 100000
 	select CONSTRUCTORS if !UML
 	default n
 	---help---

2.25.1

From: Ilya Dryomov <[email protected]>

commit f44d04e696feaf13d192d942c4f14ad2e117065a upstream.

It turns out that currently we rely only on sysfs attribute permissions:

  $ ll /sys/bus/rbd/{add*,remove*}
  --w------- 1 root root 4096 Sep  3 20:37 /sys/bus/rbd/add
  --w------- 1 root root 4096 Sep  3 20:37 /sys/bus/rbd/add_single_major
  --w------- 1 root root 4096 Sep  3 20:37 /sys/bus/rbd/remove
  --w------- 1 root root 4096 Sep  3 20:38 /sys/bus/rbd/remove_single_major

This means that images can be mapped and unmapped (i.e. block devices can be created and deleted) by a UID 0 process even after it drops all privileges or by any process with CAP_DAC_OVERRIDE in its user namespace as long as UID 0 is mapped into that user namespace.

Be consistent with other virtual block devices (loop, nbd, dm, md, etc) and require CAP_SYS_ADMIN in the initial user namespace for mapping and unmapping, and also for dumping the configuration string and refreshing the image header.

---
 drivers/block/rbd.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

@@ -4534,6 +4534,9 @@ static ssize_t rbd_config_info_show(stru
 {
 	struct rbd_device *rbd_dev = dev_to_rbd_dev(dev);
 
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
 	return sprintf(buf, "%s\n", rbd_dev->config_info);
 }
 

@@ -4635,6 +4638,9 @@ static ssize_t rbd_image_refresh(struct
 	struct rbd_device *rbd_dev = dev_to_rbd_dev(dev);
 	int ret;
 
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
 	ret = rbd_dev_refresh(rbd_dev);
 	if (ret)
 		return ret;

@@ -6159,6 +6165,9 @@ static ssize_t do_rbd_add(struct bus_typ
 	bool read_only;
 	int rc;
 
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
 	if (!try_module_get(THIS_MODULE))
 		return -ENODEV;
 

@@ -6311,6 +6320,9 @@ static ssize_t do_rbd_remove(struct bus_
 	bool force = false;
 	int ret;
 
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
 	dev_id = -1;
 	opt_buf[0] = '\0';
 	sscanf(buf, "%d %5s", &dev_id, opt_buf);

From: Varun Prakash <[email protected]>

commit 5528d03183fe5243416c706f64b1faa518b05130 upstream.

Current code does not consider 'page_off' in data digest calculation. To fix this, add a local variable 'first_sg' and set first_sg.offset to sg->offset + page_off.

---
 drivers/target/iscsi/iscsi_target.c |   17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

@@ -1382,14 +1382,27 @@ static u32 iscsit_do_crypto_hash_sg(
 	sg = cmd->first_data_sg;
 	page_off = cmd->first_data_sg_off;
 
+	if (data_length && page_off) {
+		struct scatterlist first_sg;
+		u32 len = min_t(u32, data_length, sg->length - page_off);
+
+		sg_init_table(&first_sg, 1);
+		sg_set_page(&first_sg, sg_page(sg), len, sg->offset + page_off);
+
+		ahash_request_set_crypt(hash, &first_sg, NULL, len);
+		crypto_ahash_update(hash);
+
+		data_length -= len;
+		sg = sg_next(sg);
+	}
+
 	while (data_length) {
-		u32 cur_len = min_t(u32, data_length, (sg->length - page_off));
+		u32 cur_len = min_t(u32, data_length, sg->length);
 
 		ahash_request_set_crypt(hash, sg, NULL, cur_len);
 		crypto_ahash_update(hash);
 
 		data_length -= cur_len;
-		page_off = 0;
 		/* iscsit_map_iovec has already checked for invalid sg pointers */
 		sg = sg_next(sg);
 	}

From: Yi Zhang <[email protected]>

commit 60b1af64eb35074a4f2d41cc1e503a7671e68963 upstream.

'parent' sysfs reads will yield '\0' bytes when the interface name has 15 chars, and there will no "\n" output.

To reproduce, create one interface with 15 chars:

[root@test ~]# ip a s enp0s29u1u7u3c2
2: enp0s29u1u7u3c2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 1000

     link/ether 02:21:28:57:47:17 brd ff:ff:ff:ff:ff:ff
     inet6 fe80::ac41:338f:5bcd:c222/64 scope link noprefixroute
        valid_lft forever preferred_lft forever

[root@test ~]# modprobe rdma_rxe
[root@test ~]# echo enp0s29u1u7u3c2 > /sys/module/rdma_rxe/parameters/add [root@test ~]# cat /sys/class/infiniband/rxe0/parent enp0s29u1u7u3c2[root@test ~]#
[root@test ~]# f="/sys/class/infiniband/rxe0/parent" [root@test ~]# echo "$(<"$f")"
-bash: warning: command substitution: ignored null byte in input enp0s29u1u7u3c2

Use scnprintf and PAGE_SIZE to fill the sysfs output buffer.

---
 drivers/infiniband/sw/rxe/rxe_verbs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -1178,7 +1178,7 @@ static ssize_t parent_show(struct device
 	struct rxe_dev *rxe = container_of(device, struct rxe_dev,
 					   ib_dev.dev);
 
-	return snprintf(buf, 16, "%s\n", rxe_parent_name(rxe, 1));
+	return scnprintf(buf, PAGE_SIZE, "%s\n", rxe_parent_name(rxe, 1));
 }
 
 static DEVICE_ATTR_RO(parent);

From: Hou Pu <[email protected]>

commit ed43ffea78dcc97db3f561da834f1a49c8961e33 upstream.

The iSCSI target login thread might get stuck with the following stack:

cat /proc/pidof iscsi_np/stack

[<0>] down_interruptible+0x42/0x50
[<0>] iscsit_access_np+0xe3/0x167
[<0>] iscsi_target_locate_portal+0x695/0x8ac
[<0>] __iscsi_target_login_thread+0x855/0xb82
[<0>] iscsi_target_login_thread+0x2f/0x5a
[<0>] kthread+0xfa/0x130
[<0>] ret_from_fork+0x1f/0x30

This can be reproduced via the following steps:

1. Initiator A tries to log in to iqn1-tpg1 on port 3260. After finishing PDU exchange in the login thread and before the negotiation is finished the the network link goes down. At this point A has not finished login and tpg->np_login_sem is held.

2. Initiator B tries to log in to iqn2-tpg1 on port 3260. After finishing PDU exchange in the login thread the target expects to process remaining login PDUs in workqueue context.

3. Initiator A' tries to log in to iqn1-tpg1 on port 3260 from a new socket. A' will wait for tpg->np_login_sem with np->np_login_timer loaded to wait for at most 15 seconds. The lock is held by A so A' eventually times out.

4. Before A' got timeout initiator B gets negotiation failed and calls iscsi_target_login_drop()->iscsi_target_login_sess_out(). The np->np_login_timer is canceled and initiator A' will hang forever. Because A' is now in the login thread, no new login requests can be serviced.

Fix this by moving iscsi_stop_login_thread_timer() out of iscsi_target_login_sess_out(). Also remove iscsi_np parameter from iscsi_target_login_sess_out().

---
 drivers/target/iscsi/iscsi_target_login.c |    6 +++---
 drivers/target/iscsi/iscsi_target_login.h |    3 +--
 drivers/target/iscsi/iscsi_target_nego.c  |    3 +--
 3 files changed, 5 insertions(+), 7 deletions(-)

@@ -1158,7 +1158,7 @@ iscsit_conn_set_transport(struct iscsi_c
 }
 
 void iscsi_target_login_sess_out(struct iscsi_conn *conn,
-		struct iscsi_np *np, bool zero_tsih, bool new_sess)
+				 bool zero_tsih, bool new_sess)
 {
 	if (!new_sess)
 		goto old_sess_out;

@@ -1180,7 +1180,6 @@ void iscsi_target_login_sess_out(struct
 	conn->sess = NULL;
 
 old_sess_out:
-	iscsi_stop_login_thread_timer(np);
 	/*
 	 * If login negotiation fails check if the Time2Retain timer
 	 * needs to be restarted.

@@ -1440,8 +1439,9 @@ static int __iscsi_target_login_thread(s
 new_sess_out:
 	new_sess = true;
 old_sess_out:
+	iscsi_stop_login_thread_timer(np);
 	tpg_np = conn->tpg_np;
-	iscsi_target_login_sess_out(conn, np, zero_tsih, new_sess);
+	iscsi_target_login_sess_out(conn, zero_tsih, new_sess);
 	new_sess = false;
 
 	if (tpg) {

@@ -22,8 +22,7 @@ extern int iscsit_put_login_tx(struct is
 extern void iscsit_free_conn(struct iscsi_np *, struct iscsi_conn *);
 extern int iscsit_start_kthreads(struct iscsi_conn *);
 extern void iscsi_post_login_handler(struct iscsi_np *, struct iscsi_conn *, u8);
-extern void iscsi_target_login_sess_out(struct iscsi_conn *, struct iscsi_np *,
-				bool, bool);
+extern void iscsi_target_login_sess_out(struct iscsi_conn *, bool, bool);
 extern int iscsi_target_login_thread(void *);
 
 #endif   /*** ISCSI_TARGET_LOGIN_H ***/

@@ -554,12 +554,11 @@ static bool iscsi_target_sk_check_and_cl
 
 static void iscsi_target_login_drop(struct iscsi_conn *conn, struct iscsi_login *login)
 {
-	struct iscsi_np *np = login->np;
 	bool zero_tsih = login->zero_tsih;
 
 	iscsi_remove_failed_auth_entry(conn);
 	iscsi_target_nego_release(conn);
-	iscsi_target_login_sess_out(conn, np, zero_tsih, true);
+	iscsi_target_login_sess_out(conn, zero_tsih, true);
 }
 
 static void iscsi_target_login_timeout(unsigned long data)

From: Wanpeng Li <[email protected]>

commit 99b82a1437cb31340dbb2c437a2923b9814a7b15 upstream.

According to SDM 27.2.4, Event delivery causes an APIC-access VM exit. Don't report internal error and freeze guest when event delivery causes an APIC-access exit, it is handleable and the event will be re-injected during the next vmentry.

Message-Id: <[email protected]>

---
 arch/x86/kvm/vmx.c |    1 +
 1 file changed, 1 insertion(+)

@@ -9144,6 +9144,7 @@ static int vmx_handle_exit(struct kvm_vc
 			(exit_reason != EXIT_REASON_EXCEPTION_NMI &&
 			exit_reason != EXIT_REASON_EPT_VIOLATION &&
 			exit_reason != EXIT_REASON_PML_FULL &&
+			exit_reason != EXIT_REASON_APIC_ACCESS &&
 			exit_reason != EXIT_REASON_TASK_SWITCH)) {
 		vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
 		vcpu->run->internal.suberror = KVM_INTERNAL_ERROR_DELIVERY_EV;

From: Angelo Compagnucci <[email protected]>

commit 3f1093d83d7164e4705e4232ccf76da54adfda85 upstream.

Locking should be held for the entire reading sequence involving setting the channel, waiting for the channel switch and reading from the channel.
If not, reading from a channel can result mixing with the reading from another channel.

---
 drivers/iio/adc/mcp3422.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

@@ -99,16 +99,12 @@ static int mcp3422_update_config(struct
 {
 	int ret;
 
-	mutex_lock(&adc->lock);
-
 	ret = i2c_master_send(adc->i2c, &newconfig, 1);
 	if (ret > 0) {
 		adc->config = newconfig;
 		ret = 0;
 	}
 
-	mutex_unlock(&adc->lock);
-
 	return ret;
 }
 

@@ -141,6 +137,8 @@ static int mcp3422_read_channel(struct m
 	u8 config;
 	u8 req_channel = channel->channel;
 
+	mutex_lock(&adc->lock);
+
 	if (req_channel != MCP3422_CHANNEL(adc->config)) {
 		config = adc->config;
 		config &= ~MCP3422_CHANNEL_MASK;

@@ -153,7 +151,11 @@ static int mcp3422_read_channel(struct m
 		msleep(mcp3422_read_times[MCP3422_SAMPLE_RATE(adc->config)]);
 	}
 
-	return mcp3422_read(adc, value, &config);
+	ret = mcp3422_read(adc, value, &config);
+
+	mutex_unlock(&adc->lock);
+
+	return ret;
 }
 
 static int mcp3422_read_raw(struct iio_dev *iio,

From: Jonathan Cameron <[email protected]>

commit a661b571e3682705cb402a5cd1e970586a3ec00f upstream.

One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv().

This data is allocated with kzalloc so no data can leak apart from previous readings.

The force alignment of ts is not strictly necessary in this case but reduces the fragility of the code.

---
 drivers/iio/adc/ti-adc084s021.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

@@ -28,6 +28,11 @@ struct adc084s021 {
 	struct spi_transfer spi_trans;
 	struct regulator *reg;
 	struct mutex lock;
+	/* Buffer used to align data */
+	struct {
+		__be16 channels[4];
+		s64 ts __aligned(8);
+	} scan;
 	/*
 	 * DMA (thus cache coherency maintenance) requires the
 	 * transfer buffers to live in their own cache line.

@@ -143,14 +148,13 @@ static irqreturn_t adc084s021_buffer_tri
 	struct iio_poll_func *pf = pollfunc;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct adc084s021 *adc = iio_priv(indio_dev);
-	__be16 data[8] = {0}; /* 4 * 16-bit words of data + 8 bytes timestamp */
 
 	mutex_lock(&adc->lock);
 
-	if (adc084s021_adc_conversion(adc, &data) < 0)
+	if (adc084s021_adc_conversion(adc, adc->scan.channels) < 0)
 		dev_err(&adc->spi->dev, "Failed to read data\n");
 
-	iio_push_to_buffers_with_timestamp(indio_dev, data,
+	iio_push_to_buffers_with_timestamp(indio_dev, &adc->scan,
 					   iio_get_time_ns(indio_dev));
 	mutex_unlock(&adc->lock);
 	iio_trigger_notify_done(indio_dev->trig);

From: Jonathan Cameron <[email protected]>

commit a6f86f724394de3629da63fe5e1b7a4ab3396efe upstream.

One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses a 16 byte array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment ensured by use of an explicit c structure. This data is allocated with kzalloc so no data can leak appart from previous readings.

Fixes tag is beyond some major refactoring so likely manual backporting would be needed to get that far back.

Whilst the force alignment of the ts is not strictly necessary, it does make the code less fragile.

---
 drivers/iio/accel/bmc150-accel-core.c |   15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

@@ -197,6 +197,14 @@ struct bmc150_accel_data {
 	struct mutex mutex;
 	u8 fifo_mode, watermark;
 	s16 buffer[8];
+	/*
+	 * Ensure there is sufficient space and correct alignment for
+	 * the timestamp if enabled
+	 */
+	struct {
+		__le16 channels[3];
+		s64 ts __aligned(8);
+	} scan;
 	u8 bw_bits;
 	u32 slope_dur;
 	u32 slope_thres;

@@ -933,15 +941,16 @@ static int __bmc150_accel_fifo_flush(str
 	 * now.
 	 */
 	for (i = 0; i < count; i++) {
-		u16 sample[8];
 		int j, bit;
 
 		j = 0;
 		for_each_set_bit(bit, indio_dev->active_scan_mask,
 				 indio_dev->masklength)
-			memcpy(&sample[j++], &buffer[i * 3 + bit], 2);
+			memcpy(&data->scan.channels[j++], &buffer[i * 3 + bit],
+			       sizeof(data->scan.channels[0]));
 
-		iio_push_to_buffers_with_timestamp(indio_dev, sample, tstamp);
+		iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
+						   tstamp);
 
 		tstamp += sample_period;
 	}

From: Jonathan Cameron <[email protected]>

commit f8cd222feb82ecd82dcf610fcc15186f55f9c2b5 upstream.

One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses a 32 byte array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment explicitly requested. This data is allocated with kzalloc so no data can leak apart from previous readings. The explicit alignment isn't technically needed here, but it reduced fragility and avoids cut and paste into drivers where it will be needed.

If we want this in older stables will need manual backport due to driver reworks.

---
 drivers/iio/adc/ina2xx-adc.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

@@ -133,6 +133,11 @@ struct ina2xx_chip_info {
 	int int_time_vbus; /* Bus voltage integration time uS */
 	int int_time_vshunt; /* Shunt voltage integration time uS */
 	bool allow_async_readout;
+	/* data buffer needs space for channel data and timestamp */
+	struct {
+		u16 chan[4];
+		u64 ts __aligned(8);
+	} scan;
 };
 
 static const struct ina2xx_config ina2xx_config[] = {

@@ -598,7 +603,6 @@ static const struct iio_chan_spec ina219
 static int ina2xx_work_buffer(struct iio_dev *indio_dev)
 {
 	struct ina2xx_chip_info *chip = iio_priv(indio_dev);
-	unsigned short data[8];
 	int bit, ret, i = 0;
 	s64 time_a, time_b;
 	unsigned int alert;

@@ -648,7 +652,7 @@ static int ina2xx_work_buffer(struct iio
 		if (ret < 0)
 			return ret;
 
-		data[i++] = val;
+		chip->scan.chan[i++] = val;
 
 		if (INA2XX_SHUNT_VOLTAGE + bit == INA2XX_POWER)
 			cnvr_need_clear = 0;

@@ -665,8 +669,7 @@ static int ina2xx_work_buffer(struct iio
 
 	time_b = iio_get_time_ns(indio_dev);
 
-	iio_push_to_buffers_with_timestamp(indio_dev,
-					   (unsigned int *)data, time_a);
+	iio_push_to_buffers_with_timestamp(indio_dev, &chip->scan, time_a);
 
 	return (unsigned long)(time_b - time_a) / 1000;
 };

From: Rafael J. Wysocki <[email protected]>

[ Upstream commit 43298db3009f06fe5c69e1ca8b6cfc2565772fa1 ]

After commit f6ebbcf08f37 ("cpufreq: intel_pstate: Implement passive mode with HWP enabled") it is possible to change the driver status to "off" via sysfs with HWP enabled, which effectively causes the driver to unregister itself, but HWP remains active and it forces the minimum performance, so even if another cpufreq driver is loaded, it will not be able to control the CPU frequency.

For this reason, make the driver refuse to change the status to "off" with HWP enabled.

---
 drivers/cpufreq/intel_pstate.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

index 5c41dc9aaa46d..be1a7bb0b4011 100644
@@ -2098,9 +2098,15 @@ static int intel_pstate_update_status(const char *buf, size_t size)
 {
 	int ret;
 
-	if (size == 3 && !strncmp(buf, "off", size))
-		return intel_pstate_driver ?
-			intel_pstate_unregister_driver() : -EINVAL;
+	if (size == 3 && !strncmp(buf, "off", size)) {
+		if (!intel_pstate_driver)
+			return -EINVAL;
+
+		if (hwp_active)
+			return -EBUSY;
+
+		return intel_pstate_unregister_driver();
+	}
 
 	if (size == 6 && !strncmp(buf, "active", size)) {
 		if (intel_pstate_driver) {

2.25.1

From: Jonathan Cameron <[email protected]>

commit 2684d5003490df5398aeafe2592ba9d4a4653998 upstream.

One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. Here we use a structure on the stack. The driver already did an explicit memset so no data leak was possible.

Forced alignment of ts is not strictly necessary but probably makes the code slightly less fragile.

Note there has been some rework in this driver of the years, so no way this will apply cleanly all the way back.

---
 drivers/iio/light/ltr501.c |   15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

@@ -1249,13 +1249,16 @@ static irqreturn_t ltr501_trigger_handle
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct ltr501_data *data = iio_priv(indio_dev);
-	u16 buf[8];
+	struct {
+		u16 channels[3];
+		s64 ts __aligned(8);
+	} scan;
 	__le16 als_buf[2];
 	u8 mask = 0;
 	int j = 0;
 	int ret, psdata;
 
-	memset(buf, 0, sizeof(buf));
+	memset(&scan, 0, sizeof(scan));
 
 	/* figure out which data needs to be ready */
 	if (test_bit(0, indio_dev->active_scan_mask) ||

@@ -1274,9 +1277,9 @@ static irqreturn_t ltr501_trigger_handle
 		if (ret < 0)
 			return ret;
 		if (test_bit(0, indio_dev->active_scan_mask))
-			buf[j++] = le16_to_cpu(als_buf[1]);
+			scan.channels[j++] = le16_to_cpu(als_buf[1]);
 		if (test_bit(1, indio_dev->active_scan_mask))
-			buf[j++] = le16_to_cpu(als_buf[0]);
+			scan.channels[j++] = le16_to_cpu(als_buf[0]);
 	}
 
 	if (mask & LTR501_STATUS_PS_RDY) {

@@ -1284,10 +1287,10 @@ static irqreturn_t ltr501_trigger_handle
 				       &psdata, 2);
 		if (ret < 0)
 			goto done;
-		buf[j++] = psdata & LTR501_PS_DATA_MASK;
+		scan.channels[j++] = psdata & LTR501_PS_DATA_MASK;
 	}
 
-	iio_push_to_buffers_with_timestamp(indio_dev, buf,
+	iio_push_to_buffers_with_timestamp(indio_dev, &scan,
 					   iio_get_time_ns(indio_dev));
 
 done:

From: Maxim Kochetkov <[email protected]>

commit e71e6dbe96ac80ac2aebe71a6a942e7bd60e7596 upstream.

To stop conversion ads1015_set_power_state() function call unimplemented function __pm_runtime_suspend() from pm_runtime_put_autosuspend() if CONFIG_PM is not set.
In case of CONFIG_PM is not set: __pm_runtime_suspend() returns -ENOSYS, so ads1015_read_raw() failed because ads1015_set_power_state() returns an error.

If CONFIG_PM is disabled, there is no need to start/stop conversion. Fix it by adding return 0 function variant if CONFIG_PM is not set.

---
 drivers/iio/adc/ti-ads1015.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

@@ -312,6 +312,7 @@ static const struct iio_chan_spec ads111
 	IIO_CHAN_SOFT_TIMESTAMP(ADS1015_TIMESTAMP),
 };
 
+#ifdef CONFIG_PM
 static int ads1015_set_power_state(struct ads1015_data *data, bool on)
 {
 	int ret;

@@ -329,6 +330,15 @@ static int ads1015_set_power_state(struc
 	return ret < 0 ? ret : 0;
 }
 
+#else /* !CONFIG_PM */
+
+static int ads1015_set_power_state(struct ads1015_data *data, bool on)
+{
+	return 0;
+}
+
+#endif /* !CONFIG_PM */
+
 static
 int ads1015_get_adc_result(struct ads1015_data *data, int chan, int *val)
 {

From: Vincent Whitchurch <[email protected]>

[ Upstream commit 837ba18dfcd4db21ad58107c65bfe89753aa56d7 ]

The "tx/rx-transfer - crossing PAGE_SIZE" test always fails when len=131071 and rx_offset >= 5:

spi-loopback-test spi0.0: Running test tx/rx-transfer - crossing PAGE_SIZE
...
with iteration values: len = 131071, tx_off = 0, rx_off = 3 with iteration values: len = 131071, tx_off = 0, rx_off = 4 with iteration values: len = 131071, tx_off = 0, rx_off = 5
loopback strangeness - rx changed outside of allowed range at: ...a4321000
spi_msg@ffffffd5a4157690

     frame_length:  131071
     actual_length: 131071
     spi_transfer@ffffffd5a41576f8
       len:    131071
       tx_buf: ffffffd5a4340ffc

Note that rx_offset > 3 can only occur if the SPI controller driver sets ->dma_alignment to a higher value than 4, so most SPI controller drivers are not affect.

The allocated Rx buffer is of size SPI_TEST_MAX_SIZE_PLUS, which is 132 KiB (assuming 4 KiB pages). This test uses an initial offset into the rx_buf of PAGE_SIZE - 4, and a len of 131071, so the range expected to be written in this transfer ends at (4096 - 4) + 5 + 131071 == 132 KiB, which is also the end of the allocated buffer. But the code which verifies the content of the buffer reads a byte beyond the allocated buffer and spuriously fails because this out-of-bounds read doesn't return the expected value.

Fix this by using ITERATE_LEN instead of ITERATE_MAX_LEN to avoid testing sizes which cause out-of-bounds reads.

---
 drivers/spi/spi-loopback-test.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index bed7403bb6b3a..b9a7117b6dce3 100644
@@ -99,7 +99,7 @@ static struct spi_test spi_tests[] = {
 	{
 		.description	= "tx/rx-transfer - crossing PAGE_SIZE",
 		.fill_option	= FILL_COUNT_8,
-		.iterate_len    = { ITERATE_MAX_LEN },
+		.iterate_len    = { ITERATE_LEN },
 		.iterate_tx_align = ITERATE_ALIGN,
 		.iterate_rx_align = ITERATE_ALIGN,
 		.transfer_count = 1,

2.25.1

From: Sahitya Tummala <[email protected]>

[ Upstream commit e2cab031ba7b5003cd12185b3ef38f1a75e3dae8 ]

If the sbi->ckpt->next_free_nid is not NAT block aligned and if there are free nids in that NAT block between the start of the block and next_free_nid, then those free nids will not be scanned in scan_nat_page(). This results into mismatch between nm_i->available_nids and the sum of nm_i->free_nid_count of all NAT blocks scanned. And nm_i->available_nids will always be greater than the sum of free nids in all the blocks. Under this condition, if we use all the currently scanned free nids, then it will loop forever in f2fs_alloc_nid() as nm_i->available_nids is still not zero but nm_i->free_nid_count of that partially scanned NAT block is zero.

Fix this to align the nm_i->next_scan_nid to the first nid of the corresponding NAT block.

---
 fs/f2fs/node.c | 3 +++
 1 file changed, 3 insertions(+)

index e7b8e2b35e226..f8006f62c5467 100644
@@ -2011,6 +2011,9 @@ static void __build_free_nids(struct f2fs_sb_info *sbi, bool sync, bool mount)
 	if (unlikely(nid >= nm_i->max_nid))
 		nid = 0;
 
+	if (unlikely(nid % NAT_ENTRY_PER_BLOCK))
+		nid = NAT_BLOCK_OFFSET(nid) * NAT_ENTRY_PER_BLOCK;
+
 	/* Enough entries */
 	if (nm_i->nid_cnt[FREE_NID_LIST] >= NAT_ENTRY_PER_BLOCK)
 		return;

2.25.1

From: David Milburn <[email protected]>

[ Upstream commit e126e8210e950bb83414c4f57b3120ddb8450742 ]

Cancel async event work in case async event has been queued up, and nvme_fc_submit_async_event() runs after event has been freed.

---
 drivers/nvme/host/fc.c | 1 +
 1 file changed, 1 insertion(+)

index 13c89cc9d10cf..e95d2f75713e1 100644
@@ -1566,6 +1566,7 @@ nvme_fc_term_aen_ops(struct nvme_fc_ctrl *ctrl)
 	struct nvme_fc_fcp_op *aen_op;
 	int i;
 
+	cancel_work_sync(&ctrl->ctrl.async_event_work);
 	aen_op = ctrl->aen_ops;
 	for (i = 0; i < NVME_FC_NR_AEN_COMMANDS; i++, aen_op++) {
 		if (!aen_op->fcp_req.private)

2.25.1

From: Evan Nimmo <[email protected]>

[ Upstream commit 0a355aeb24081e4538d4d424cd189f16c0bbd983 ]

If something goes wrong (such as the SCL being stuck low) then we need to reset the PCA chip. The issue with this is that on reset we lose all config settings and the chip ends up in a disabled state which results in a lock up/high CPU usage. We need to re-apply any configuration that had previously been set and re-enable the chip.

---
 drivers/i2c/algos/i2c-algo-pca.c | 35 +++++++++++++++++++++-----------
 include/linux/i2c-algo-pca.h     | 15 ++++++++++++++
 2 files changed, 38 insertions(+), 12 deletions(-)

index 3a9db4626cb60..1886588b9ea3e 100644
@@ -50,8 +50,22 @@ static void pca_reset(struct i2c_algo_pca_data *adap)
 		pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_IPRESET);
 		pca_outw(adap, I2C_PCA_IND, 0xA5);
 		pca_outw(adap, I2C_PCA_IND, 0x5A);
+
+		/*
+		 * After a reset we need to re-apply any configuration
+		 * (calculated in pca_init) to get the bus in a working state.
+		 */
+		pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_IMODE);
+		pca_outw(adap, I2C_PCA_IND, adap->bus_settings.mode);
+		pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_ISCLL);
+		pca_outw(adap, I2C_PCA_IND, adap->bus_settings.tlow);
+		pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_ISCLH);
+		pca_outw(adap, I2C_PCA_IND, adap->bus_settings.thi);
+
+		pca_set_con(adap, I2C_PCA_CON_ENSIO);
 	} else {
 		adap->reset_chip(adap->data);
+		pca_set_con(adap, I2C_PCA_CON_ENSIO | adap->bus_settings.clock_freq);
 	}
 }
 

@@ -435,13 +449,14 @@ static int pca_init(struct i2c_adapter *adap)
 				" Use the nominal frequency.\n", adap->name);
 		}
 
-		pca_reset(pca_data);
-
 		clock = pca_clock(pca_data);
 		printk(KERN_INFO "%s: Clock frequency is %dkHz\n",
 		     adap->name, freqs[clock]);
 
-		pca_set_con(pca_data, I2C_PCA_CON_ENSIO | clock);
+		/* Store settings as these will be needed when the PCA chip is reset */
+		pca_data->bus_settings.clock_freq = clock;
+
+		pca_reset(pca_data);
 	} else {
 		int clock;
 		int mode;

@@ -508,19 +523,15 @@ static int pca_init(struct i2c_adapter *adap)
 			thi = tlow * min_thi / min_tlow;
 		}
 
+		/* Store settings as these will be needed when the PCA chip is reset */
+		pca_data->bus_settings.mode = mode;
+		pca_data->bus_settings.tlow = tlow;
+		pca_data->bus_settings.thi = thi;
+
 		pca_reset(pca_data);
 
 		printk(KERN_INFO
 		     "%s: Clock frequency is %dHz\n", adap->name, clock * 100);
-
-		pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_IMODE);
-		pca_outw(pca_data, I2C_PCA_IND, mode);
-		pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_ISCLL);
-		pca_outw(pca_data, I2C_PCA_IND, tlow);
-		pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_ISCLH);
-		pca_outw(pca_data, I2C_PCA_IND, thi);
-
-		pca_set_con(pca_data, I2C_PCA_CON_ENSIO);
 	}
 	udelay(500); /* 500 us for oscillator to stabilise */
 

index d03071732db4a..7c522fdd9ea73 100644
@@ -53,6 +53,20 @@
 #define I2C_PCA_CON_SI		0x08 /* Serial Interrupt */
 #define I2C_PCA_CON_CR		0x07 /* Clock Rate (MASK) */
 
+/**
+ * struct pca_i2c_bus_settings - The configured PCA i2c bus settings
+ * @mode: Configured i2c bus mode
+ * @tlow: Configured SCL LOW period
+ * @thi: Configured SCL HIGH period
+ * @clock_freq: The configured clock frequency
+ */
+struct pca_i2c_bus_settings {
+	int mode;
+	int tlow;
+	int thi;
+	int clock_freq;
+};
+
 struct i2c_algo_pca_data {
 	void 				*data;	/* private low level data */
 	void (*write_byte)		(void *data, int reg, int val);

@@ -64,6 +78,7 @@ struct i2c_algo_pca_data {
 	 * For PCA9665, use the frequency you want here. */
 	unsigned int			i2c_clock;
 	unsigned int			chip;
+	struct pca_i2c_bus_settings		bus_settings;
 };
 
 int i2c_pca_add_bus(struct i2c_adapter *);

2.25.1

From: Patrick Riphagen <[email protected]>

commit 6ccc48e0eb2f3a5f3bd39954a21317e5f8874726 upstream.

The device added has an FTDI chip inside.
The device is used to connect Xsens USB Motion Trackers.

---
 drivers/usb/serial/ftdi_sio.c     |    1 +
 drivers/usb/serial/ftdi_sio_ids.h |    1 +
 2 files changed, 2 insertions(+)

@@ -708,6 +708,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(XSENS_VID, XSENS_AWINDA_STATION_PID) },
 	{ USB_DEVICE(XSENS_VID, XSENS_CONVERTER_PID) },
 	{ USB_DEVICE(XSENS_VID, XSENS_MTDEVBOARD_PID) },
+	{ USB_DEVICE(XSENS_VID, XSENS_MTIUSBCONVERTER_PID) },
 	{ USB_DEVICE(XSENS_VID, XSENS_MTW_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_OMNI1509) },
 	{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },

@@ -160,6 +160,7 @@
 #define XSENS_AWINDA_DONGLE_PID 0x0102
 #define XSENS_MTW_PID		0x0200	/* Xsens MTw */
 #define XSENS_MTDEVBOARD_PID	0x0300	/* Motion Tracker Development Board */
+#define XSENS_MTIUSBCONVERTER_PID	0x0301	/* MTi USB converter */
 #define XSENS_CONVERTER_PID	0xD00D	/* Xsens USB-serial converter */
 
 /* Xsens devices using FTDI VID */

From: Michael Kelley <[email protected]>

[ Upstream commit 911e1987efc8f3e6445955fbae7f54b428b92bd3 ]

vmbus_wait_for_unload() looks for a CHANNELMSG_UNLOAD_RESPONSE message coming from Hyper-V. But if the message isn't found for some reason, the panic path gets hung forever. Add a timeout of 10 seconds to prevent this.

---
 drivers/hv/channel_mgmt.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

index 462f7f363faab..5bf633c15cd4b 100644
@@ -774,7 +774,7 @@ static void vmbus_wait_for_unload(void)
 	void *page_addr;
 	struct hv_message *msg;
 	struct vmbus_channel_message_header *hdr;
-	u32 message_type;
+	u32 message_type, i;
 
 	/*
 	 * CHANNELMSG_UNLOAD_RESPONSE is always delivered to the CPU which was

@@ -784,8 +784,11 @@ static void vmbus_wait_for_unload(void)
 	 * functional and vmbus_unload_response() will complete
 	 * vmbus_connection.unload_event. If not, the last thing we can do is
 	 * read message pages for all CPUs directly.
+	 *
+	 * Wait no more than 10 seconds so that the panic path can't get
+	 * hung forever in case the response message isn't seen.
 	 */
-	while (1) {
+	for (i = 0; i < 1000; i++) {
 		if (completion_done(&vmbus_connection.unload_event))
 			break;
 

2.25.1

From: Thomas Bogendoerfer <[email protected]>

[ Upstream commit 564c836fd945a94b5dd46597d6b7adb464092650 ]

Commit 930beb5ac09a ("MIPS: introduce MIPS_L1_CACHE_SHIFT_<N>") forgot to select the correct MIPS_L1_CACHE_SHIFT for SNI RM. This breaks non coherent DMA because of a wrong allocation alignment.

---
 arch/mips/Kconfig | 1 +
 1 file changed, 1 insertion(+)

index 7e267d657c561..49c540790fd2d 100644
@@ -856,6 +856,7 @@ config SNI_RM
 	select I8253
 	select I8259
 	select ISA
+	select MIPS_L1_CACHE_SHIFT_6
 	select SWAP_IO_SPACE if CPU_BIG_ENDIAN
 	select SYS_HAS_CPU_R4X00
 	select SYS_HAS_CPU_R5000

2.25.1

From: Namhyung Kim <[email protected]>

[ Upstream commit d26383dcb2b4b8629fde05270b4e3633be9e3d4b ]

The following leaks were detected by ASAN:

Indirect leak of 360 byte(s) in 9 object(s) allocated from:

    #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e)
    #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333
    #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59
    #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73
    #4 0x560578e07045 in test__pmu tests/pmu.c:155
    #5 0x560578de109b in run_test tests/builtin-test.c:410
    #6 0x560578de109b in test_and_print tests/builtin-test.c:440
    #7 0x560578de401a in __cmd_test tests/builtin-test.c:661
    #8 0x560578de401a in cmd_test tests/builtin-test.c:807
    #9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
    #10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
    #11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
    #12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
    #13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308

---
 tools/perf/tests/pmu.c |  1 +
 tools/perf/util/pmu.c  | 11 +++++++++++
 tools/perf/util/pmu.h  |  1 +
 3 files changed, 13 insertions(+)

index 7bedf8608fdde..3e183eef6f857 100644
@@ -172,6 +172,7 @@ int test__pmu(struct test *test __maybe_unused, int subtest __maybe_unused)
 		ret = 0;
 	} while (0);
 
+	perf_pmu__del_formats(&formats);
 	test_format_dir_put(format);
 	return ret;
 }

index 2deffc2349324..ca00b4104bc09 100644
@@ -1100,6 +1100,17 @@ void perf_pmu__set_format(unsigned long *bits, long from, long to)
 		set_bit(b, bits);
 }
 
+void perf_pmu__del_formats(struct list_head *formats)
+{
+	struct perf_pmu_format *fmt, *tmp;
+
+	list_for_each_entry_safe(fmt, tmp, formats, list) {
+		list_del(&fmt->list);
+		free(fmt->name);
+		free(fmt);
+	}
+}
+
 static int sub_non_neg(int a, int b)
 {
 	if (b > a)

index eca99435f4a0b..59ad5de6601a7 100644
@@ -79,6 +79,7 @@ int perf_pmu__new_format(struct list_head *list, char *name,
 			 int config, unsigned long *bits);
 void perf_pmu__set_format(unsigned long *bits, long from, long to);
 int perf_pmu__format_parse(char *dir, struct list_head *head);
+void perf_pmu__del_formats(struct list_head *formats);
 
 struct perf_pmu *perf_pmu__scan(struct perf_pmu *pmu);
 

2.25.1

From: Nathan Chancellor <[email protected]>

[ Upstream commit e9c006bc782c488f485ffe50de20b44e1e3daa18 ]

A new warning in Clang points out that the initialization of mux_pll_src_4plls_p appears incorrect:

../drivers/clk/rockchip/clk-rk3228.c:140:58: warning: suspicious concatenation of string literals in an array initialization; did you mean to separate the elements with a comma? [-Wstring-concatenation]

PNAME(mux_pll_src_4plls_p)      = { "cpll", "gpll", "hdmiphy" "usb480m" };
                                                              ^
                                                             ,
../drivers/clk/rockchip/clk-rk3228.c:140:48: note: place parentheses
around the string literal to silence warning
PNAME(mux_pll_src_4plls_p)      = { "cpll", "gpll", "hdmiphy" "usb480m" };
                                                    ^

1 warning generated.

Given the name of the variable and the same variable name in rv1108, it seems that this should have been four distinct elements. Fix it up by adding the comma as suggested.

---
 drivers/clk/rockchip/clk-rk3228.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 04f4f3739e3be..8d11d76e1db7c 100644
@@ -144,7 +144,7 @@ PNAME(mux_usb480m_p)		= { "usb480m_phy", "xin24m" };
 PNAME(mux_hdmiphy_p)		= { "hdmiphy_phy", "xin24m" };
 PNAME(mux_aclk_cpu_src_p)	= { "cpll_aclk_cpu", "gpll_aclk_cpu", "hdmiphy_aclk_cpu" };
 
-PNAME(mux_pll_src_4plls_p)	= { "cpll", "gpll", "hdmiphy" "usb480m" };
+PNAME(mux_pll_src_4plls_p)	= { "cpll", "gpll", "hdmiphy", "usb480m" };
 PNAME(mux_pll_src_3plls_p)	= { "cpll", "gpll", "hdmiphy" };
 PNAME(mux_pll_src_2plls_p)	= { "cpll", "gpll" };
 PNAME(mux_sclk_hdmi_cec_p)	= { "cpll", "gpll", "xin24m" };

2.25.1

From: Huacai Chen <[email protected]>

[ Upstream commit 15e9e35cd1dec2bc138464de6bf8ef828df19235 ]

MIPS defines two kvm types:

#define KVM_VM_MIPS_TE 0
#define KVM_VM_MIPS_VZ 1

In Documentation/virt/kvm/api.rst it is said that "You probably want to use 0 as machine type", which implies that type 0 be the "automatic" or "default" type. And, in user-space libvirt use the null-machine (with type 0) to detect the kvm capability, which returns "KVM not supported" on a VZ platform.

I try to fix it in QEMU but it is ugly:
https://lists.nongnu.org/archive/html/qemu-devel/2020-08/msg05629.html

And Thomas Huth suggests me to change the definition of kvm type:
https://lists.nongnu.org/archive/html/qemu-devel/2020-09/msg03281.html

So I define like this:

 #define KVM_VM_MIPS_AUTO        0
 #define KVM_VM_MIPS_VZ          1
 #define KVM_VM_MIPS_TE          2

Since VZ and TE cannot co-exists, using type 0 on a TE platform will still return success (so old user-space tools have no problems on new kernels); the advantage is that using type 0 on a VZ platform will not return failure. So, the only problem is "new user-space tools use type 2 on old kernels", but if we treat this as a kernel bug, we can backport this patch to old stable kernels.

Message-Id: <[email protected]>

---
 arch/mips/kvm/mips.c     | 2 ++
 include/uapi/linux/kvm.h | 5 +++--
 2 files changed, 5 insertions(+), 2 deletions(-)

index aa6c365f25591..8614225e92eb5 100644
@@ -131,6 +131,8 @@ void kvm_arch_check_processor_compat(void *rtn)
 int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 {
 	switch (type) {
+	case KVM_VM_MIPS_AUTO:
+		break;
 #ifdef CONFIG_KVM_MIPS_VZ
 	case KVM_VM_MIPS_VZ:
 #else

index efe8873943f66..62f5e47aed160 100644
@@ -735,9 +735,10 @@ struct kvm_ppc_resize_hpt {
 #define KVM_VM_PPC_HV 1
 #define KVM_VM_PPC_PR 2
 
-/* on MIPS, 0 forces trap & emulate, 1 forces VZ ASE */
-#define KVM_VM_MIPS_TE		0
+/* on MIPS, 0 indicates auto, 1 forces VZ ASE, 2 forces trap & emulate */
+#define KVM_VM_MIPS_AUTO	0
 #define KVM_VM_MIPS_VZ		1
+#define KVM_VM_MIPS_TE		2
 
 #define KVM_S390_SIE_PAGE_OFFSET 1
 

2.25.1

From: Penghao <[email protected]>

commit bcea6dafeeef7d1a6a8320a249aabf981d63b881 upstream.

Add a USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for the BYD zhaoxin notebook. This notebook come with usb touchpad. And we would like to disable touchpad wakeup on this notebook by default.

---
 drivers/usb/core/quirks.c |    4 ++++
 1 file changed, 4 insertions(+)

@@ -236,6 +236,10 @@ static const struct usb_device_id usb_qu
 	/* Generic RTL8153 based ethernet adapters */
 	{ USB_DEVICE(0x0bda, 0x8153), .driver_info = USB_QUIRK_NO_LPM },
 
+	/* SONiX USB DEVICE Touchpad */
+	{ USB_DEVICE(0x0c45, 0x7056), .driver_info =
+			USB_QUIRK_IGNORE_REMOTE_WAKEUP },
+
 	/* Action Semiconductor flash disk */
 	{ USB_DEVICE(0x10d6, 0x2200), .driver_info =
 			USB_QUIRK_STRING_FETCH_255 },

From: Yu Kuai <[email protected]>

[ Upstream commit 0680a622318b8d657323b94082f4b9a44038dfee ]

if of_find_device_by_node() succeed, mtk_drm_kms_init() doesn't have a corresponding put_device(). Thus add jump target to fix the exception handling for this function implementation.

---
 drivers/gpu/drm/mediatek/mtk_hdmi.c | 26 ++++++++++++++++++--------
 1 file changed, 18 insertions(+), 8 deletions(-)

index 3c69c73fbd473..f1a376c34e713 100644
@@ -1476,25 +1476,30 @@ static int mtk_hdmi_dt_parse_pdata(struct mtk_hdmi *hdmi,
 		dev_err(dev,
 			"Failed to get system configuration registers: %d\n",
 			ret);
-		return ret;
+		goto put_device;
 	}
 	hdmi->sys_regmap = regmap;
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	hdmi->regs = devm_ioremap_resource(dev, mem);
-	if (IS_ERR(hdmi->regs))
-		return PTR_ERR(hdmi->regs);
+	if (IS_ERR(hdmi->regs)) {
+		ret = PTR_ERR(hdmi->regs);
+		goto put_device;
+	}
 
 	remote = of_graph_get_remote_node(np, 1, 0);
-	if (!remote)
-		return -EINVAL;
+	if (!remote) {
+		ret = -EINVAL;
+		goto put_device;
+	}
 
 	if (!of_device_is_compatible(remote, "hdmi-connector")) {
 		hdmi->next_bridge = of_drm_find_bridge(remote);
 		if (!hdmi->next_bridge) {
 			dev_err(dev, "Waiting for external bridge\n");
 			of_node_put(remote);
-			return -EPROBE_DEFER;
+			ret = -EPROBE_DEFER;
+			goto put_device;
 		}
 	}
 

@@ -1503,7 +1508,8 @@ static int mtk_hdmi_dt_parse_pdata(struct mtk_hdmi *hdmi,
 		dev_err(dev, "Failed to find ddc-i2c-bus node in %pOF\n",
 			remote);
 		of_node_put(remote);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto put_device;
 	}
 	of_node_put(remote);
 

@@ -1511,10 +1517,14 @@ static int mtk_hdmi_dt_parse_pdata(struct mtk_hdmi *hdmi,
 	of_node_put(i2c_np);
 	if (!hdmi->ddc_adpt) {
 		dev_err(dev, "Failed to get ddc i2c adapter by node\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto put_device;
 	}
 
 	return 0;
+put_device:
+	put_device(hdmi->cec_dev);
+	return ret;
 }
 
 /*

2.25.1

From: Bjørn Mork <[email protected]>

commit 2bb70f0a4b238323e4e2f392fc3ddeb5b7208c9e upstream.

The USB composition, defining the set of exported functions, is dynamic in newer Quectel modems. Default functions can be disabled and alternative functions can be enabled instead. The alternatives includes class functions using interface pairs, which should be handled by the respective class drivers.

Active interfaces are numbered consecutively, so static blacklisting based on interface numbers will fail when the composition changes. An example of such an error, where the option driver has bound to the CDC ECM data interface, preventing cdc_ether from handling this function:

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0125 Rev= 3.18
S: Manufacturer=Quectel
S: Product=EC25-AF
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
A: FirstIf#= 4 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=(none)
E: Ad=89(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I:* If#= 5 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=option
I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=option
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Another device with the same id gets correct drivers, since the interface of the network function happens to be blacklisted by option:

T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0125 Rev= 3.18
S: Manufacturer=Android
S: Product=Android
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Change rules for EC21, EC25, BG96 and EG95 to match vendor specific serial functions only, to prevent binding to class functions. Require 2 endpoints on ff/ff/ff functions, avoiding the 3 endpoint QMI/RMNET network functions.

---
 drivers/usb/serial/option.c |   20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

@@ -1097,14 +1097,18 @@ static const struct usb_device_id option
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R410M),
 	  .driver_info = RSVD(1) | RSVD(3) },
 	/* Quectel products using Quectel vendor ID */
-	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21),
-	  .driver_info = RSVD(4) },
-	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25),
-	  .driver_info = RSVD(4) },
-	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95),
-	  .driver_info = RSVD(4) },
-	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96),
-	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21, 0xff, 0xff, 0xff),
+	  .driver_info = NUMEP2 },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25, 0xff, 0xff, 0xff),
+	  .driver_info = NUMEP2 },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0xff, 0xff),
+	  .driver_info = NUMEP2 },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96, 0xff, 0xff, 0xff),
+	  .driver_info = NUMEP2 },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) },

From: Yu Kuai <[email protected]>

[ Upstream commit 64c194c00789889b0f9454f583712f079ba414ee ]

mtk_ddp_comp_init() is called in a loop in mtk_drm_probe(), if it fail, previous successive init component is not proccessed.

Thus uninitialize valid component and put their device if component init failed.

---
 drivers/gpu/drm/mediatek/mtk_drm_drv.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

index 670662128edd2..f32645a33cc90 100644
@@ -538,8 +538,13 @@ err_pm:
 	pm_runtime_disable(dev);
 err_node:
 	of_node_put(private->mutex_node);
-	for (i = 0; i < DDP_COMPONENT_ID_MAX; i++)
+	for (i = 0; i < DDP_COMPONENT_ID_MAX; i++) {
 		of_node_put(private->comp_node[i]);
+		if (private->ddp_comp[i]) {
+			put_device(private->ddp_comp[i]->larb_dev);
+			private->ddp_comp[i] = NULL;
+		}
+	}
 	return ret;
 }
 

2.25.1

From: Peter Oberparleiter <[email protected]>

[ Upstream commit 40249c6962075c040fd071339acae524f18bfac9 ]

Using gcov to collect coverage data for kernels compiled with GCC 10.1 causes random malfunctions and kernel crashes. This is the result of a changed GCOV_COUNTERS value in GCC 10.1 that causes a mismatch between the layout of the gcov_info structure created by GCC profiling code and the related structure used by the kernel.

Fix this by updating the in-kernel GCOV_COUNTERS value. Also re-enable config GCOV_KERNEL for use with GCC 10.

---
 kernel/gcov/Kconfig   | 1 -
 kernel/gcov/gcc_4_7.c | 4 +++-
 2 files changed, 3 insertions(+), 2 deletions(-)

index 1d78ed19a3512..1276aabaab550 100644
@@ -3,7 +3,6 @@ menu "GCOV-based kernel profiling"
 config GCOV_KERNEL
 	bool "Enable gcov-based kernel profiling"
 	depends on DEBUG_FS
-	depends on !CC_IS_GCC || GCC_VERSION < 100000
 	select CONSTRUCTORS if !UML
 	default n
 	---help---

index ca5e5c0ef8536..5b9e76117ded1 100644
@@ -19,7 +19,9 @@
 #include <linux/vmalloc.h>
 #include "gcov.h"
 
-#if (__GNUC__ >= 7)
+#if (__GNUC__ >= 10)
+#define GCOV_COUNTERS			8
+#elif (__GNUC__ >= 7)
 #define GCOV_COUNTERS			9
 #elif (__GNUC__ > 5) || (__GNUC__ == 5 && __GNUC_MINOR__ >= 1)
 #define GCOV_COUNTERS			10

2.25.1

From: Heikki Krogerus <[email protected]>

commit 1f3546ff3f0a1000971daef58406954bad3f7061 upstream.

Failing probe with -EPROBE_DEFER until all dependencies listed in the _DEP (Operation Region Dependencies) object have been met.

This will fix an issue where on some platforms UCSI ACPI driver fails to probe because the address space handler for the operation region that the UCSI ACPI interface uses has not been loaded yet.

---
 drivers/usb/typec/ucsi/ucsi_acpi.c |    4 ++++
 1 file changed, 4 insertions(+)

@@ -67,11 +67,15 @@ static void ucsi_acpi_notify(acpi_handle
 
 static int ucsi_acpi_probe(struct platform_device *pdev)
 {
+	struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
 	struct ucsi_acpi *ua;
 	struct resource *res;
 	acpi_status status;
 	int ret;
 
+	if (adev->dep_unmet)
+		return -EPROBE_DEFER;
+
 	ua = devm_kzalloc(&pdev->dev, sizeof(*ua), GFP_KERNEL);
 	if (!ua)
 		return -ENOMEM;

From: Mathias Nyman <[email protected]>

commit cfd54fa83a5068b61b7eb28d3c117d8354c74c7a upstream.

Userspace drivers that use a SetConfiguration() request to "lightweight" reset an already configured usb device might cause data toggles to get out of sync between the device and host, and the device becomes unusable.

The xHCI host requires endpoints to be dropped and added back to reset the toggle. If USB core notices the new configuration is the same as the current active configuration it will avoid these extra steps by calling usb_reset_configuration() instead of usb_set_configuration().

A SetConfiguration() request will reset the device side data toggles. Make sure usb_reset_configuration() function also drops and adds back the endpoints to ensure data toggles are in sync.

To avoid code duplication split the current usb_disable_device() function and reuse the endpoint specific part.

---
 drivers/usb/core/message.c |   93 ++++++++++++++++++++-------------------------
 1 file changed, 43 insertions(+), 50 deletions(-)

@@ -1143,6 +1143,34 @@ void usb_disable_interface(struct usb_de
 	}
 }
 
+/*
+ * usb_disable_device_endpoints -- Disable all endpoints for a device
+ * @dev: the device whose endpoints are being disabled
+ * @skip_ep0: 0 to disable endpoint 0, 1 to skip it.
+ */
+static void usb_disable_device_endpoints(struct usb_device *dev, int skip_ep0)
+{
+	struct usb_hcd *hcd = bus_to_hcd(dev->bus);
+	int i;
+
+	if (hcd->driver->check_bandwidth) {
+		/* First pass: Cancel URBs, leave endpoint pointers intact. */
+		for (i = skip_ep0; i < 16; ++i) {
+			usb_disable_endpoint(dev, i, false);
+			usb_disable_endpoint(dev, i + USB_DIR_IN, false);
+		}
+		/* Remove endpoints from the host controller internal state */
+		mutex_lock(hcd->bandwidth_mutex);
+		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+		mutex_unlock(hcd->bandwidth_mutex);
+	}
+	/* Second pass: remove endpoint pointers */
+	for (i = skip_ep0; i < 16; ++i) {
+		usb_disable_endpoint(dev, i, true);
+		usb_disable_endpoint(dev, i + USB_DIR_IN, true);
+	}
+}
+
 /**
  * usb_disable_device - Disable all the endpoints for a USB device
  * @dev: the device whose endpoints are being disabled

@@ -1156,7 +1184,6 @@ void usb_disable_interface(struct usb_de
 void usb_disable_device(struct usb_device *dev, int skip_ep0)
 {
 	int i;
-	struct usb_hcd *hcd = bus_to_hcd(dev->bus);
 
 	/* getting rid of interfaces will disconnect
 	 * any drivers bound to them (a key side effect)

@@ -1202,22 +1229,8 @@ void usb_disable_device(struct usb_devic
 
 	dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__,
 		skip_ep0 ? "non-ep0" : "all");
-	if (hcd->driver->check_bandwidth) {
-		/* First pass: Cancel URBs, leave endpoint pointers intact. */
-		for (i = skip_ep0; i < 16; ++i) {
-			usb_disable_endpoint(dev, i, false);
-			usb_disable_endpoint(dev, i + USB_DIR_IN, false);
-		}
-		/* Remove endpoints from the host controller internal state */
-		mutex_lock(hcd->bandwidth_mutex);
-		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
-		mutex_unlock(hcd->bandwidth_mutex);
-		/* Second pass: remove endpoint pointers */
-	}
-	for (i = skip_ep0; i < 16; ++i) {
-		usb_disable_endpoint(dev, i, true);
-		usb_disable_endpoint(dev, i + USB_DIR_IN, true);
-	}
+
+	usb_disable_device_endpoints(dev, skip_ep0);
 }
 
 /**

@@ -1460,6 +1473,9 @@ EXPORT_SYMBOL_GPL(usb_set_interface);
  * The caller must own the device lock.
  *
  * Return: Zero on success, else a negative error code.
+ *
+ * If this routine fails the device will probably be in an unusable state
+ * with endpoints disabled, and interfaces only partially enabled.
  */
 int usb_reset_configuration(struct usb_device *dev)
 {

@@ -1475,10 +1491,7 @@ int usb_reset_configuration(struct usb_d
 	 * calls during probe() are fine
 	 */
 
-	for (i = 1; i < 16; ++i) {
-		usb_disable_endpoint(dev, i, true);
-		usb_disable_endpoint(dev, i + USB_DIR_IN, true);
-	}
+	usb_disable_device_endpoints(dev, 1); /* skip ep0*/
 
 	config = dev->actconfig;
 	retval = 0;

@@ -1491,34 +1504,10 @@ int usb_reset_configuration(struct usb_d
 		mutex_unlock(hcd->bandwidth_mutex);
 		return -ENOMEM;
 	}
-	/* Make sure we have enough bandwidth for each alternate setting 0 */
-	for (i = 0; i < config->desc.bNumInterfaces; i++) {
-		struct usb_interface *intf = config->interface[i];
-		struct usb_host_interface *alt;
-
-		alt = usb_altnum_to_altsetting(intf, 0);
-		if (!alt)
-			alt = &intf->altsetting[0];
-		if (alt != intf->cur_altsetting)
-			retval = usb_hcd_alloc_bandwidth(dev, NULL,
-					intf->cur_altsetting, alt);
-		if (retval < 0)
-			break;
-	}
-	/* If not, reinstate the old alternate settings */
+
+	/* xHCI adds all endpoints in usb_hcd_alloc_bandwidth */
+	retval = usb_hcd_alloc_bandwidth(dev, config, NULL, NULL);
 	if (retval < 0) {
-reset_old_alts:
-		for (i--; i >= 0; i--) {
-			struct usb_interface *intf = config->interface[i];
-			struct usb_host_interface *alt;
-
-			alt = usb_altnum_to_altsetting(intf, 0);
-			if (!alt)
-				alt = &intf->altsetting[0];
-			if (alt != intf->cur_altsetting)
-				usb_hcd_alloc_bandwidth(dev, NULL,
-						alt, intf->cur_altsetting);
-		}
 		usb_enable_lpm(dev);
 		mutex_unlock(hcd->bandwidth_mutex);
 		return retval;

@@ -1527,8 +1516,12 @@ reset_old_alts:
 			USB_REQ_SET_CONFIGURATION, 0,
 			config->desc.bConfigurationValue, 0,
 			NULL, 0, USB_CTRL_SET_TIMEOUT);
-	if (retval < 0)
-		goto reset_old_alts;
+	if (retval < 0) {
+		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+		usb_enable_lpm(dev);
+		mutex_unlock(hcd->bandwidth_mutex);
+		return retval;
+	}
 	mutex_unlock(hcd->bandwidth_mutex);
 
 	/* re-init hc/hcd interface/endpoint state */

From: Oliver Neukum <[email protected]>

commit 325b008723b2dd31de020e85ab9d2e9aa4637d35 upstream.

The SCSI layer can go into an ugly loop if you ignore that a device is gone. You need to report an error in the command rather than in the return value of the queue method.

We need to specifically check for ENODEV. The issue goes back to the introduction of the driver.

---
 drivers/usb/storage/uas.c |   14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

@@ -670,8 +670,7 @@ static int uas_queuecommand_lck(struct s
 	if (devinfo->resetting) {
 		cmnd->result = DID_ERROR << 16;
 		cmnd->scsi_done(cmnd);
-		spin_unlock_irqrestore(&devinfo->lock, flags);
-		return 0;
+		goto zombie;
 	}
 
 	/* Find a free uas-tag */

@@ -706,6 +705,16 @@ static int uas_queuecommand_lck(struct s
 		cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB);
 
 	err = uas_submit_urbs(cmnd, devinfo);
+	/*
+	 * in case of fatal errors the SCSI layer is peculiar
+	 * a command that has finished is a success for the purpose
+	 * of queueing, no matter how fatal the error
+	 */
+	if (err == -ENODEV) {
+		cmnd->result = DID_ERROR << 16;
+		cmnd->scsi_done(cmnd);
+		goto zombie;
+	}
 	if (err) {
 		/* If we did nothing, give up now */
 		if (cmdinfo->state & SUBMIT_STATUS_URB) {

@@ -716,6 +725,7 @@ static int uas_queuecommand_lck(struct s
 	}
 
 	devinfo->cmnd[idx] = cmnd;
+zombie:
 	spin_unlock_irqrestore(&devinfo->lock, flags);
 	return 0;
 }

From: Aleksander Morgado <[email protected]>

commit 1ac698790819b83f39fd7ea4f6cdabee9bdd7b38 upstream.

These modules have 2 different USB layouts:

The default layout with PID 0x9205 (AT+CUSBSELNV=1) exposes 4 TTYs and an ECM interface:

  T:  Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  6 Spd=480 MxCh= 0
  D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
  P:  Vendor=1e0e ProdID=9205 Rev=00.00
  S:  Manufacturer=SimTech, Incorporated
  S:  Product=SimTech SIM7080
  S:  SerialNumber=1234567890ABCDEF
  C:  #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA
  I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
  I:  If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
  I:  If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
  I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
  I:  If#=0x4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
  I:  If#=0x5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether

The purpose of each TTY is as follows:
* ttyUSB0: DIAG/QCDM port.
* ttyUSB1: GNSS data.
* ttyUSB2: AT-capable port (control).
* ttyUSB3: AT-capable port (data).

In the secondary layout with PID=0x9206 (AT+CUSBSELNV=86) the module exposes 6 TTY ports:

  T:  Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  8 Spd=480 MxCh= 0
  D:  Ver= 2.00 Cls=02(commc) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
  P:  Vendor=1e0e ProdID=9206 Rev=00.00
  S:  Manufacturer=SimTech, Incorporated
  S:  Product=SimTech SIM7080
  S:  SerialNumber=1234567890ABCDEF
  C:  #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA
  I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
  I:  If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
  I:  If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
  I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
  I:  If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
  I:  If#=0x5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

The purpose of each TTY is as follows:
* ttyUSB0: DIAG/QCDM port.
* ttyUSB1: GNSS data.
* ttyUSB2: AT-capable port (control).
* ttyUSB3: QFLOG interface.
* ttyUSB4: DAM interface.
* ttyUSB5: AT-capable port (data).

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -1826,6 +1826,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9003, 0xff) },	/* Simcom SIM7500/SIM7600 MBIM mode */
 	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9011, 0xff),	/* Simcom SIM7500/SIM7600 RNDIS mode */
 	  .driver_info = RSVD(7) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9205, 0xff) },	/* Simcom SIM7070/SIM7080/SIM7090 AT+ECM mode */
+	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9206, 0xff) },	/* Simcom SIM7070/SIM7080/SIM7090 AT-only mode */
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
 	  .driver_info = NCTRL(0) | NCTRL(1) | RSVD(4) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D),

From: Vincent Huang <[email protected]>

commit 6c77545af100a72bf5e28142b510ba042a17648d upstream.

Add trackpoint variant IDs to allow supported control on Synaptics trackpoints.

---
 drivers/input/mouse/trackpoint.c |   10 ++++++----
 drivers/input/mouse/trackpoint.h |   10 ++++++----
 2 files changed, 12 insertions(+), 8 deletions(-)

@@ -20,10 +20,12 @@
 #include "trackpoint.h"
 
 static const char * const trackpoint_variants[] = {
-	[TP_VARIANT_IBM]	= "IBM",
-	[TP_VARIANT_ALPS]	= "ALPS",
-	[TP_VARIANT_ELAN]	= "Elan",
-	[TP_VARIANT_NXP]	= "NXP",
+	[TP_VARIANT_IBM]		= "IBM",
+	[TP_VARIANT_ALPS]		= "ALPS",
+	[TP_VARIANT_ELAN]		= "Elan",
+	[TP_VARIANT_NXP]		= "NXP",
+	[TP_VARIANT_JYT_SYNAPTICS]	= "JYT_Synaptics",
+	[TP_VARIANT_SYNAPTICS]		= "Synaptics",
 };
 
 /*

@@ -27,10 +27,12 @@
  * 0x01 was the original IBM trackpoint, others implement very limited
  * subset of trackpoint features.
  */
-#define TP_VARIANT_IBM		0x01
-#define TP_VARIANT_ALPS		0x02
-#define TP_VARIANT_ELAN		0x03
-#define TP_VARIANT_NXP		0x04
+#define TP_VARIANT_IBM			0x01
+#define TP_VARIANT_ALPS			0x02
+#define TP_VARIANT_ELAN			0x03
+#define TP_VARIANT_NXP			0x04
+#define TP_VARIANT_JYT_SYNAPTICS	0x05
+#define TP_VARIANT_SYNAPTICS		0x06
 
 /*
  * Commands

From: Oliver Neukum <[email protected]>

commit 9cdabcb3ef8c24ca3a456e4db7b012befb688e73 upstream.

read() needs to check whether the device has been disconnected before it tries to talk to the device.

---
 drivers/usb/class/usblp.c |    5 +++++
 1 file changed, 5 insertions(+)

@@ -840,6 +840,11 @@ static ssize_t usblp_read(struct file *f
 	if (rv < 0)
 		return rv;
 
+	if (!usblp->present) {
+		count = -ENODEV;
+		goto done;
+	}
+
 	if ((avail = usblp->rstatus) < 0) {
 		printk(KERN_ERR "usblp%d: error %d reading from printer\n",
 		    usblp->minor, (int)avail);

From: Adam Borowski <[email protected]>

commit 72a9c673636b779e370983fea08e40f97039b981 upstream.

A spanking new machine I just got has all but one USB ports wired as 3.0. Booting defconfig resulted in no keyboard or mouse, which was pretty uncool. Let's enable that -- USB3 is ubiquitous rather than an oddity. As 'y' not 'm' -- recovering from initrd problems needs a keyboard.

Also add it to the 32-bit defconfig.

---
 arch/x86/configs/i386_defconfig   |    1 +
 arch/x86/configs/x86_64_defconfig |    1 +
 2 files changed, 2 insertions(+)

@@ -246,6 +246,7 @@ CONFIG_USB_HIDDEV=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_MON=y
+CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
 CONFIG_USB_OHCI_HCD=y

@@ -242,6 +242,7 @@ CONFIG_USB_HIDDEV=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_MON=y
+CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
 CONFIG_USB_OHCI_HCD=y

From: Tobias Diedrich <[email protected]>

commit 3c5a87be170aba8ac40982182f812dcff6ed1ad1 upstream.

These serial ports are exposed by the OOB-management-engine on RealManage-enabled network cards (e.g. AMD DASH enabled systems using Realtek cards).

Because these have 3 BARs, they fail the "num_iomem <= 1" check in serial_pci_guess_board.

I've manually checked the two IOMEM regions and BAR 2 doesn't seem to respond to reads, but BAR 4 seems to be an MMIO version of the IO ports (untested).

With this change, the ports are detected:
0000:02:00.1: ttyS0 at I/O 0x2200 (irq = 82, base_baud = 115200) is a 16550A 0000:02:00.2: ttyS1 at I/O 0x2100 (irq = 55, base_baud = 115200) is a 16550A

lspci output:
02:00.1 0700: 10ec:816a (rev 0e) (prog-if 02 [16550])
Subsystem: 17aa:5082
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 82
IOMMU group: 11
Region 0: I/O ports at 2200 [size=256]
Region 2: Memory at fd715000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at fd704000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s (ok), Width x1 (ok)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Via message/WAKE#, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled,
AtomicOpsCtl: ReqEn-
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [d0] Vital Product Data
Not readable
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00
Capabilities: [170 v1] Latency Tolerance Reporting
Max snoop latency: 0ns
Max no snoop latency: 0ns
Capabilities: [178 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=150us PortTPowerOnTime=150us
L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
T_CommonMode=0us LTR1.2_Threshold=0ns
L1SubCtl2: T_PwrOn=10us
02:00.2 0700: 10ec:816b (rev 0e)
[...same...]

---
 drivers/tty/serial/8250/8250_pci.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

@@ -5247,6 +5247,17 @@ static const struct pci_device_id serial
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0, pbn_wch384_4 },
 
+	/*
+	 * Realtek RealManage
+	 */
+	{	PCI_VENDOR_ID_REALTEK, 0x816a,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0, pbn_b0_1_115200 },
+
+	{	PCI_VENDOR_ID_REALTEK, 0x816b,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0, pbn_b0_1_115200 },
+
 	/* Fintek PCI serial cards */
 	{ PCI_DEVICE(0x1c29, 0x1104), .driver_data = pbn_fintek_4 },
 	{ PCI_DEVICE(0x1c29, 0x1108), .driver_data = pbn_fintek_8 },

From: Quentin Perret <[email protected]>

commit 29231826f3bd65500118c473fccf31c0cf14dbc0 upstream.

The CRC calculation done by genksyms is triggered when the parser hits EXPORT_SYMBOL*() macros. At this point, genksyms recursively expands the types of the function parameters, and uses that as the input for the CRC calculation. In the case of forward-declared structs, the type expands to 'UNKNOWN'. Following this, it appears that the result of the expansion of each type is cached somewhere, and seems to be re-used when/if the same type is seen again for another exported symbol in the same C file.

Unfortunately, this can cause CRC 'stability' issues when a struct definition becomes visible in the middle of a C file. For example, let's assume code with the following pattern:

    struct foo;

    int bar(struct foo *arg)
    {
	/* Do work ... */
    }
    EXPORT_SYMBOL_GPL(bar);

    /* This contains struct foo's definition */
    #include "foo.h"

    int baz(struct foo *arg)
    {
	/* Do more work ... */
    }
    EXPORT_SYMBOL_GPL(baz);

Here, baz's CRC will be computed using the expansion of struct foo that was cached after bar's CRC calculation ('UNKOWN' here). But if EXPORT_SYMBOL_GPL(bar) is removed from the file (because of e.g. symbol trimming using CONFIG_TRIM_UNUSED_KSYMS), struct foo will be expanded late, during baz's CRC calculation, which now has visibility over the full struct definition, hence resulting in a different CRC for baz.

The proper fix for this certainly is in genksyms, but that will take me some time to get right. In the meantime, we have seen one occurrence of this in the ehci-hcd code which hits this problem because of the way it includes C files halfway through the code together with an unlucky mix of symbol trimming.

In order to workaround this, move the include done in ehci-hub.c early in ehci-hcd.c, hence making sure the struct definitions are visible to the entire file. This improves CRC stability of the ehci-hcd exports even when symbol trimming is enabled.

---
 drivers/usb/host/ehci-hcd.c |    1 +
 drivers/usb/host/ehci-hub.c |    1 -
 2 files changed, 1 insertion(+), 1 deletion(-)

@@ -35,6 +35,7 @@
 #include <linux/interrupt.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
+#include <linux/usb/otg.h>
 #include <linux/moduleparam.h>
 #include <linux/dma-mapping.h>
 #include <linux/debugfs.h>

@@ -27,7 +27,6 @@
  */
 
 /*-------------------------------------------------------------------------*/
-#include <linux/usb/otg.h>
 
 #define	PORT_WAKE_BITS	(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
 

From: Alexey Kardashevskiy <[email protected]>

commit 437ef802e0adc9f162a95213a3488e8646e5fc03 upstream.

There are 2 problems with it:
1. "<" vs expected "<<"
2. the shift number is an IOMMU page number mask, not an address mask as the IOMMU page shift is missing.

This did not hit us before f1565c24b596 ("powerpc: use the generic dma_ops_bypass mode") because we had additional code to handle bypass mask so this chunk (almost?) never executed.However there were reports that aacraid does not work with "iommu=nobypass".

After f1565c24b596, aacraid (and probably others which call dma_get_required_mask() before setting the mask) was unable to enable 64bit DMA and fall back to using IOMMU which was known not to work, one of the problems is double free of an IOMMU page.

This fixes DMA for aacraid, both with and without "iommu=nobypass" in the kernel command line. Verified with "stress-ng -d 4".

---
 arch/powerpc/kernel/dma-iommu.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -100,7 +100,8 @@ static u64 dma_iommu_get_required_mask(s
 	if (!tbl)
 		return 0;
 
-	mask = 1ULL < (fls_long(tbl->it_offset + tbl->it_size) - 1);
+	mask = 1ULL << (fls_long(tbl->it_offset + tbl->it_size) +
+			tbl->it_page_shift - 1);
 	mask += mask - 1;
 
 	return mask;

From: Hans de Goede <[email protected]>

commit c4440b8a457779adeec42c5e181cb4016f19ce0f upstream.

The keyboard drops keypresses early during boot unless both the nomux and reset quirks are set. Add DMI table entries for this.

---
 drivers/input/serio/i8042-x86ia64io.h |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

@@ -552,6 +552,14 @@ static const struct dmi_system_id __init
 			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5738"),
 		},
 	},
+	{
+		/* Entroware Proteus */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Entroware"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Proteus"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "EL07R4"),
+		},
+	},
 	{ }
 };
 

@@ -680,6 +688,14 @@ static const struct dmi_system_id __init
 			DMI_MATCH(DMI_PRODUCT_NAME, "33474HU"),
 		},
 	},
+	{
+		/* Entroware Proteus */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Entroware"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Proteus"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "EL07R4"),
+		},
+	},
 	{ }
 };
 

From: Volker Rümelin <[email protected]>

commit 66d402e2e9455cf0213c42b97f22a0493372d7cc upstream.

On suspend the original host configuration gets restored. The resume routine has to undo this, otherwise the SMBus master may be left in disabled state or in i2c mode.

[JD: Rebased on v5.8, moved the write into i801_setup_hstcfg.]

---
 drivers/i2c/busses/i2c-i801.c |   21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

@@ -1499,6 +1499,16 @@ static inline int i801_acpi_probe(struct
 static inline void i801_acpi_remove(struct i801_priv *priv) { }
 #endif
 
+static unsigned char i801_setup_hstcfg(struct i801_priv *priv)
+{
+	unsigned char hstcfg = priv->original_hstcfg;
+
+	hstcfg &= ~SMBHSTCFG_I2C_EN;	/* SMBus timing */
+	hstcfg |= SMBHSTCFG_HST_EN;
+	pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hstcfg);
+	return hstcfg;
+}
+
 static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	unsigned char temp;

@@ -1602,14 +1612,10 @@ static int i801_probe(struct pci_dev *de
 		return err;
 	}
 
-	pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &temp);
-	priv->original_hstcfg = temp;
-	temp &= ~SMBHSTCFG_I2C_EN;	/* SMBus timing */
-	if (!(temp & SMBHSTCFG_HST_EN)) {
+	pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &priv->original_hstcfg);
+	temp = i801_setup_hstcfg(priv);
+	if (!(priv->original_hstcfg & SMBHSTCFG_HST_EN))
 		dev_info(&dev->dev, "Enabling SMBus device\n");
-		temp |= SMBHSTCFG_HST_EN;
-	}
-	pci_write_config_byte(priv->pci_dev, SMBHSTCFG, temp);
 
 	if (temp & SMBHSTCFG_SMB_SMI_EN) {
 		dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n");

@@ -1736,6 +1742,7 @@ static int i801_resume(struct device *de
 	struct pci_dev *pci_dev = to_pci_dev(dev);
 	struct i801_priv *priv = pci_get_drvdata(pci_dev);
 
+	i801_setup_hstcfg(priv);
 	i801_enable_host_notify(&priv->adapter);
 
 	return 0;

From: Miaohe Lin <[email protected]>

commit eabe861881a733fc84f286f4d5a1ffaddd4f526f upstream.

pskb_carve_frag_list() may return -ENOMEM in pskb_carve_inside_nonlinear(). we should handle this correctly or we would get wrong sk_buff.

---
 net/core/skbuff.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

@@ -5447,9 +5447,13 @@ static int pskb_carve_inside_nonlinear(s
 	if (skb_has_frag_list(skb))
 		skb_clone_fraglist(skb);
 
-	if (k == 0) {
-		/* split line is in frag list */
-		pskb_carve_frag_list(skb, shinfo, off - pos, gfp_mask);
+	/* split line is in frag list */
+	if (k == 0 && pskb_carve_frag_list(skb, shinfo, off - pos, gfp_mask)) {
+		/* skb_frag_unref() is not needed here as shinfo->nr_frags = 0. */
+		if (skb_has_frag_list(skb))
+			kfree_skb_list(skb_shinfo(skb)->frag_list);
+		kfree(data);
+		return -ENOMEM;
 	}
 	skb_release_data(skb);